[ARM] 5288/1: [AT91] Remove SMC configuration from devices.c files

[deliverable/linux.git] / arch / arm / mach-at91 / at91sam9261_devices.c

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b80860e313839c11b25af3c9c8bb3a41e215863a..17289756f80ffe8c5eb6d34bd561ea2fe119a0f5 100644 (file)
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -223,7 +223,7 @@ static struct platform_device atmel_nand_device = {
 
 void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
-       unsigned long csa, mode;
+       unsigned long csa;
 
        if (!data)
                return;
@@ -231,21 +231,6 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
        csa = at91_sys_read(AT91_MATRIX_EBICSA);
        at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-       /* set the bus interface characteristics */
-       at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
-                       | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
-       at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-                       | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
-       at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
-       if (data->bus_width_16)
-               mode = AT91_SMC_DBW_16;
-       else
-               mode = AT91_SMC_DBW_8;
-       at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
        /* enable pin */
        if (data->enable_pin)
                at91_set_gpio_output(data->enable_pin, 1);