[ARM] 5288/1: [AT91] Remove SMC configuration from devices.c files

[deliverable/linux.git] / arch / arm / mach-at91 / at91sam9261_devices.c

diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ec1891375dfbefb9a9090a9ee17e6212c10a3128..17289756f80ffe8c5eb6d34bd561ea2fe119a0f5 100644 (file)
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -198,8 +198,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE      AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
        }
 };
 
-static struct platform_device at91_nand_device = {
-       .name           = "at91_nand",
+static struct platform_device atmel_nand_device = {
+       .name           = "atmel_nand",
        .id             = -1,
        .dev            = {
                                .platform_data  = &nand_data,
@@ -221,9 +221,9 @@ static struct platform_device at91_nand_device = {
        .num_resources  = ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
-       unsigned long csa, mode;
+       unsigned long csa;
 
        if (!data)
                return;
@@ -231,21 +231,6 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
        csa = at91_sys_read(AT91_MATRIX_EBICSA);
        at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
-       /* set the bus interface characteristics */
-       at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
-                       | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
-
-       at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
-                       | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
-
-       at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
-
-       if (data->bus_width_16)
-               mode = AT91_SMC_DBW_16;
-       else
-               mode = AT91_SMC_DBW_8;
-       at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
-
        /* enable pin */
        if (data->enable_pin)
                at91_set_gpio_output(data->enable_pin, 1);
@@ -262,11 +247,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
        at91_set_A_periph(AT91_PIN_PC1, 0);             /* NANDWE */
 
        nand_data = *data;
-       platform_device_register(&at91_nand_device);
+       platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif