ARM i.MX ehci: do ehci init in board specific functions

[deliverable/linux.git] / arch / arm / mach-mx3 / mach-mx31lilly.c

diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 1c3f4913d1ea5c25e37a743ea2dc13909eda6bb3..be79a0d6301e7d08295b6f6958d3d2fe5d78718f 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
@@ -156,7 +157,9 @@ static int usbotg_init(struct platform_device *pdev)
        gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
        gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
 
-       return 0;
+       mdelay(10);
+
+       return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static int usbh1_init(struct platform_device *pdev)
@@ -183,7 +186,10 @@ static int usbh1_init(struct platform_device *pdev)
 
        mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
 
-       return 0;
+       mdelay(10);
+
+       return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+                       MXC_EHCI_INTERFACE_SINGLE_UNI);
 }
 
 static int usbh2_init(struct platform_device *pdev)
@@ -220,25 +226,24 @@ static int usbh2_init(struct platform_device *pdev)
        gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
        gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
 
-       return 0;
+       mdelay(10);
+
+       return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 }
 
 static struct mxc_usbh_platform_data usbotg_pdata = {
        .init   = usbotg_init,
        .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-       .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
        .init   = usbh1_init,
        .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
-       .flags  = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
 static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
        .init   = usbh2_init,
        .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
-       .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static void lilly1131_usb_init(void)