ARM Samsung: Move s3c pwm driver to pwm framework

[deliverable/linux.git] / arch / arm / plat-samsung / Makefile

diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 1105922342fe0c412607ef79a3138768772bc258..96854721319c72a8ef79836c56c1bf74a9b8a7aa 100644 (file)
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -1,4 +1,4 @@
-# arch/arm/plat-s3c64xx/Makefile
+# arch/arm/plat-samsung/Makefile
 #
 # Copyright 2009 Simtec Electronics
 #
@@ -11,17 +11,20 @@ obj-                                :=
 
 # Objects we always build independent of SoC choice
 
-obj-y                          += init.o
+obj-y                          += init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
+obj-$(CONFIG_S5P_HRT)          += s5p-time.o
+
 obj-y                          += clock.o
 obj-y                          += pwm-clock.o
-obj-y                          += gpio.o
-obj-y                          += gpio-config.o
-obj-y                          += dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)   += clock-clksrc.o
+obj-$(CONFIG_S5P_CLOCK)                += s5p-clock.o
 
 obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
+obj-$(CONFIG_S5P_IRQ)          += s5p-irq.o
+obj-$(CONFIG_S5P_EXT_INT)      += s5p-irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT)     += s5p-irq-gpioint.o
 
 # ADC
 
@@ -31,40 +34,20 @@ obj-$(CONFIG_S3C_ADC)       += adc.o
 
 obj-y                          += platformdata.o
 
-obj-$(CONFIG_S3C_DEV_HSMMC)    += dev-hsmmc.o
-obj-$(CONFIG_S3C_DEV_HSMMC1)   += dev-hsmmc1.o
-obj-$(CONFIG_S3C_DEV_HSMMC2)   += dev-hsmmc2.o
-obj-$(CONFIG_S3C_DEV_HSMMC3)   += dev-hsmmc3.o
-obj-$(CONFIG_S3C_DEV_HWMON)    += dev-hwmon.o
-obj-y                          += dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1)     += dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_I2C2)     += dev-i2c2.o
-obj-$(CONFIG_S3C_DEV_I2C3)     += dev-i2c3.o
-obj-$(CONFIG_S3C_DEV_I2C4)     += dev-i2c4.o
-obj-$(CONFIG_S3C_DEV_I2C5)     += dev-i2c5.o
-obj-$(CONFIG_S3C_DEV_I2C6)     += dev-i2c6.o
-obj-$(CONFIG_S3C_DEV_I2C7)     += dev-i2c7.o
-obj-$(CONFIG_S3C_DEV_FB)       += dev-fb.o
+obj-y                          += devs.o
 obj-y                          += dev-uart.o
-obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
-obj-$(CONFIG_S3C_DEV_USB_HSOTG)        += dev-usb-hsotg.o
-obj-$(CONFIG_S3C_DEV_WDT)      += dev-wdt.o
-obj-$(CONFIG_S3C_DEV_NAND)     += dev-nand.o
-obj-$(CONFIG_S3C_DEV_ONENAND)  += dev-onenand.o
-obj-$(CONFIG_S3C_DEV_RTC)      += dev-rtc.o
-
-obj-$(CONFIG_SAMSUNG_DEV_ADC)  += dev-adc.o
-obj-$(CONFIG_SAMSUNG_DEV_IDE)  += dev-ide.o
-obj-$(CONFIG_SAMSUNG_DEV_TS)   += dev-ts.o
-obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)       += dev-keypad.o
-obj-$(CONFIG_SAMSUNG_DEV_PWM)  += dev-pwm.o
+obj-$(CONFIG_S5P_DEV_MFC)      += s5p-dev-mfc.o
+obj-$(CONFIG_S5P_DEV_UART)     += s5p-dev-uart.o
+
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)    += dev-backlight.o
 
+obj-$(CONFIG_S5P_SETUP_MIPIPHY)        += setup-mipiphy.o
+
 # DMA support
 
-obj-$(CONFIG_S3C_DMA)          += dma.o
+obj-$(CONFIG_S3C_DMA)          += dma.o s3c-dma-ops.o
 
-obj-$(CONFIG_S3C_PL330_DMA)    += s3c-pl330.o
+obj-$(CONFIG_SAMSUNG_DMADEV)   += dma-ops.o
 
 # PM support
 
@@ -74,10 +57,9 @@ obj-$(CONFIG_SAMSUNG_PM_CHECK)       += pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
 
+obj-$(CONFIG_S5P_PM)           += s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_SLEEP)                += s5p-sleep.o
+
 # PD support
 
 obj-$(CONFIG_SAMSUNG_PD)       += pd.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM)         += pwm.o