local_irq_enable();
}
+/*
+ * The RM7000 variant has to handle erratum 38. The workaround is to not
+ * have any pending stores when the WAIT instruction is executed.
+ */
+static void rm7k_wait_irqoff(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ __asm__(
+ " .set push \n"
+ " .set mips3 \n"
+ " .set noat \n"
+ " mfc0 $1, $12 \n"
+ " sync \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " wait \n"
+ " mtc0 $1, $12 # stalls until W stage \n"
+ " .set pop \n");
+ local_irq_enable();
+}
+
/* The Au1xxx wait is available only if using 32khz counter or
* external timer source, but specifically not CP0 Counter. */
int allow_au1k_wait;
case CPU_R4700:
case CPU_R5000:
case CPU_NEVADA:
- case CPU_RM7000:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
case CPU_5KC:
- case CPU_24K:
case CPU_25KF:
+ case CPU_PR4450:
+ case CPU_BCM3302:
+ cpu_wait = r4k_wait;
+ break;
+
+ case CPU_RM7000:
+ cpu_wait = rm7k_wait_irqoff;
+ break;
+
+ case CPU_24K:
case CPU_34K:
+ cpu_wait = r4k_wait;
+ if (read_c0_config7() & MIPS_CONF7_WII)
+ cpu_wait = r4k_wait_irqoff;
+ break;
+
case CPU_74K:
- case CPU_PR4450:
cpu_wait = r4k_wait;
+ if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+ cpu_wait = r4k_wait_irqoff;
break;
+
case CPU_TX49XX:
cpu_wait = r4k_wait_irqoff;
break;
if ((c->processor_id & 0xff) <= 0x64)
break;
- cpu_wait = r4k_wait;
+ /*
+ * Another rev is incremeting c0_count at a reduced clock
+ * rate while in WAIT mode. So we basically have the choice
+ * between using the cp0 timer as clocksource or avoiding
+ * the WAIT instruction. Until more details are known,
+ * disable the use of WAIT for 20Kc entirely.
+ cpu_wait = r4k_wait;
+ */
break;
case CPU_RM9000:
if ((c->processor_id & 0x00ff) >= 0x40)
}
}
+static inline void check_errata(void)
+{
+ struct cpuinfo_mips *c = ¤t_cpu_data;
+
+ switch (c->cputype) {
+ case CPU_34K:
+ /*
+ * Erratum "RPS May Cause Incorrect Instruction Execution"
+ * This code only handles VPE0, any SMP/SMTC/RTOS code
+ * making use of VPE1 will be responsable for that VPE.
+ */
+ if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
+ write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
+ break;
+ default:
+ break;
+ }
+}
+
void __init check_bugs32(void)
{
check_wait();
+ check_errata();
}
/*
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
+ case PRID_IMP_LOONGSON2:
+ c->cputype = CPU_LOONGSON2;
+ c->isa_level = MIPS_CPU_ISA_III;
+ c->options = R4K_OPTS |
+ MIPS_CPU_FPU | MIPS_CPU_LLSC |
+ MIPS_CPU_32FPR;
+ c->tlbsize = 64;
+ break;
}
}
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_MT)
c->ases |= MIPS_ASE_MIPSMT;
+ if (config3 & MIPS_CONF3_ULRI)
+ c->options |= MIPS_CPU_ULRI;
return config3 & MIPS_CONF_M;
}
{
decode_configs(c);
- /*
- * For historical reasons the SB1 comes with it's own variant of
- * cache code which eventually will be folded into c-r4k.c. Until
- * then we pretend it's got it's own cache architecture.
- */
- c->options &= ~MIPS_CPU_4K_CACHE;
- c->options |= MIPS_CPU_SB1_CACHE;
-
switch (c->processor_id & 0xff00) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
}
+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
+{
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
+ case PRID_IMP_BCM3302:
+ c->cputype = CPU_BCM3302;
+ break;
+ case PRID_IMP_BCM4710:
+ c->cputype = CPU_BCM4710;
+ break;
+ default:
+ c->cputype = CPU_UNKNOWN;
+ break;
+ }
+}
+
+const char *__cpu_name[NR_CPUS];
+
+/*
+ * Name a CPU
+ */
+static __init const char *cpu_to_name(struct cpuinfo_mips *c)
+{
+ const char *name = NULL;
+
+ switch (c->cputype) {
+ case CPU_UNKNOWN: name = "unknown"; break;
+ case CPU_R2000: name = "R2000"; break;
+ case CPU_R3000: name = "R3000"; break;
+ case CPU_R3000A: name = "R3000A"; break;
+ case CPU_R3041: name = "R3041"; break;
+ case CPU_R3051: name = "R3051"; break;
+ case CPU_R3052: name = "R3052"; break;
+ case CPU_R3081: name = "R3081"; break;
+ case CPU_R3081E: name = "R3081E"; break;
+ case CPU_R4000PC: name = "R4000PC"; break;
+ case CPU_R4000SC: name = "R4000SC"; break;
+ case CPU_R4000MC: name = "R4000MC"; break;
+ case CPU_R4200: name = "R4200"; break;
+ case CPU_R4400PC: name = "R4400PC"; break;
+ case CPU_R4400SC: name = "R4400SC"; break;
+ case CPU_R4400MC: name = "R4400MC"; break;
+ case CPU_R4600: name = "R4600"; break;
+ case CPU_R6000: name = "R6000"; break;
+ case CPU_R6000A: name = "R6000A"; break;
+ case CPU_R8000: name = "R8000"; break;
+ case CPU_R10000: name = "R10000"; break;
+ case CPU_R12000: name = "R12000"; break;
+ case CPU_R14000: name = "R14000"; break;
+ case CPU_R4300: name = "R4300"; break;
+ case CPU_R4650: name = "R4650"; break;
+ case CPU_R4700: name = "R4700"; break;
+ case CPU_R5000: name = "R5000"; break;
+ case CPU_R5000A: name = "R5000A"; break;
+ case CPU_R4640: name = "R4640"; break;
+ case CPU_NEVADA: name = "Nevada"; break;
+ case CPU_RM7000: name = "RM7000"; break;
+ case CPU_RM9000: name = "RM9000"; break;
+ case CPU_R5432: name = "R5432"; break;
+ case CPU_4KC: name = "MIPS 4Kc"; break;
+ case CPU_5KC: name = "MIPS 5Kc"; break;
+ case CPU_R4310: name = "R4310"; break;
+ case CPU_SB1: name = "SiByte SB1"; break;
+ case CPU_SB1A: name = "SiByte SB1A"; break;
+ case CPU_TX3912: name = "TX3912"; break;
+ case CPU_TX3922: name = "TX3922"; break;
+ case CPU_TX3927: name = "TX3927"; break;
+ case CPU_AU1000: name = "Au1000"; break;
+ case CPU_AU1500: name = "Au1500"; break;
+ case CPU_AU1100: name = "Au1100"; break;
+ case CPU_AU1550: name = "Au1550"; break;
+ case CPU_AU1200: name = "Au1200"; break;
+ case CPU_4KEC: name = "MIPS 4KEc"; break;
+ case CPU_4KSC: name = "MIPS 4KSc"; break;
+ case CPU_VR41XX: name = "NEC Vr41xx"; break;
+ case CPU_R5500: name = "R5500"; break;
+ case CPU_TX49XX: name = "TX49xx"; break;
+ case CPU_20KC: name = "MIPS 20Kc"; break;
+ case CPU_24K: name = "MIPS 24K"; break;
+ case CPU_25KF: name = "MIPS 25Kf"; break;
+ case CPU_34K: name = "MIPS 34K"; break;
+ case CPU_74K: name = "MIPS 74K"; break;
+ case CPU_VR4111: name = "NEC VR4111"; break;
+ case CPU_VR4121: name = "NEC VR4121"; break;
+ case CPU_VR4122: name = "NEC VR4122"; break;
+ case CPU_VR4131: name = "NEC VR4131"; break;
+ case CPU_VR4133: name = "NEC VR4133"; break;
+ case CPU_VR4181: name = "NEC VR4181"; break;
+ case CPU_VR4181A: name = "NEC VR4181A"; break;
+ case CPU_SR71000: name = "Sandcraft SR71000"; break;
+ case CPU_BCM3302: name = "Broadcom BCM3302"; break;
+ case CPU_BCM4710: name = "Broadcom BCM4710"; break;
+ case CPU_PR4450: name = "Philips PR4450"; break;
+ case CPU_LOONGSON2: name = "ICT Loongson-2"; break;
+ default:
+ BUG();
+ }
+
+ return name;
+}
+
__init void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
+ unsigned int cpu = smp_processor_id();
c->processor_id = PRID_IMP_UNKNOWN;
c->fpu_id = FPIR_IMP_NONE;
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c);
break;
+ case PRID_COMP_BROADCOM:
+ cpu_probe_broadcom(c);
+ break;
case PRID_COMP_SANDCRAFT:
cpu_probe_sandcraft(c);
break;
c->ases |= MIPS_ASE_MIPS3D;
}
}
+
+ __cpu_name[cpu] = cpu_to_name(c);
}
__init void cpu_report(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
- printk("CPU revision is: %08x\n", c->processor_id);
+ printk(KERN_INFO "CPU revision is: %08x (%s)\n",
+ c->processor_id, cpu_name_string());
if (c->options & MIPS_CPU_FPU)
- printk("FPU revision is: %08x\n", c->fpu_id);
+ printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
}
projects / deliverable / linux.git / blobdiff