#include <linux/efi.h>
#include <linux/init.h>
#include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
#include <linux/nodemask.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <linux/pfn.h>
#include <linux/pci.h>
#include <linux/init_ohci1394_dma.h>
+#include <linux/kvm_para.h>
#include <video/edid.h>
#include <asm/io.h>
#include <asm/vmi.h>
#include <setup_arch.h>
-#include <bios_ebda.h>
+#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
+#include <asm/processor.h>
/* This value is set up by the early boot code to point to the value
immediately after the boot time page tables. It contains a *physical*
}, {
.name = "keyboard",
.start = 0x0060,
- .end = 0x006f,
+ .end = 0x0060,
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO
+}, {
+ .name = "keyboard",
+ .start = 0x0064,
+ .end = 0x0064,
.flags = IORESOURCE_BUSY | IORESOURCE_IO
}, {
.name = "dma page reg",
struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
EXPORT_SYMBOL(boot_cpu_data);
+unsigned int def_to_bigsmp;
+
#ifndef CONFIG_X86_PAE
unsigned long mmu_cr4_features;
#else
extern void early_cpu_init(void);
extern int root_mountflags;
-unsigned long saved_videomode;
+unsigned long saved_video_mode;
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
}
#endif
-int __initdata user_defined_memmap = 0;
-
-/*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem= [also see Documentation/i386/boot.txt]
- */
-static int __init parse_mem(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (strcmp(arg, "nopentium") == 0) {
- setup_clear_cpu_cap(X86_FEATURE_PSE);
- } else {
- /* If the user specifies memory size, we
- * limit the BIOS-provided memory map to
- * that size. exactmap can be used to specify
- * the exact map. mem=number can be used to
- * trim the existing memory map.
- */
- unsigned long long mem_size;
-
- mem_size = memparse(arg, &arg);
- limit_regions(mem_size);
- user_defined_memmap = 1;
- }
- return 0;
-}
-early_param("mem", parse_mem);
-
#ifdef CONFIG_PROC_VMCORE
/* elfcorehdr= specifies the location of elf core header
* stored by the crashed kernel.
return max_low_pfn;
}
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
/*
- * workaround for Dell systems that neglect to reserve EBDA
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
*/
static void __init reserve_ebda_region(void)
{
- unsigned int addr;
- addr = get_bios_ebda();
- if (addr)
- reserve_bootmem(addr, PAGE_SIZE, BOOTMEM_DEFAULT);
+ unsigned int lowmem, ebda_addr;
+
+ /* To determine the position of the EBDA and the */
+ /* end of conventional memory, we need to look at */
+ /* the BIOS data area. In a paravirtual environment */
+ /* that area is absent. We'll just have to assume */
+ /* that the paravirt case can handle memory setup */
+ /* correctly, without our help. */
+ if (paravirt_enabled())
+ return;
+
+ /* end of low (conventional) memory */
+ lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+ lowmem <<= 10;
+
+ /* start of EBDA area */
+ ebda_addr = get_bios_ebda();
+
+ /* Fixup: bios puts an EBDA in the top 64K segment */
+ /* of conventional memory, but does not adjust lowmem. */
+ if ((lowmem - ebda_addr) <= 0x10000)
+ lowmem = ebda_addr;
+
+ /* Fixup: bios does not report an EBDA at all. */
+ /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+ if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+ lowmem = 0x9f000;
+
+ /* Paranoia: should never happen, but... */
+ if ((lowmem == 0) || (lowmem >= 0x100000))
+ lowmem = 0x9f000;
+
+ /* reserve all memory between lowmem and the 1MB mark */
+ reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init setup_bootmem_allocator(void);
+static void __init setup_bootmem_allocator(void);
static unsigned long __init setup_memory(void)
{
/*
return max_low_pfn;
}
-void __init zone_sizes_init(void)
+static void __init zone_sizes_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
*/
reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
- /* reserve EBDA region, it's a 4K region */
+ /* reserve EBDA region */
reserve_ebda_region();
- /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent
- PCI prefetch into it (errata #56). Usually the page is reserved anyways,
- unless you have no PS/2 mouse plugged in. */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 6)
- reserve_bootmem(0xa0000 - 4096, 4096, BOOTMEM_DEFAULT);
-
#ifdef CONFIG_SMP
/*
* But first pinch a few for the stack/trampoline stuff
#endif
numa_kva_reserve();
reserve_crashkernel();
+
+ reserve_ibft_region();
}
/*
static void set_mca_bus(int x) { }
#endif
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
- return machine_specific_memory_setup();
-}
+#ifdef CONFIG_NUMA
+/*
+ * In the golden day, when everything among i386 and x86_64 will be
+ * integrated, this will not live here
+ */
+void *x86_cpu_to_node_map_early_ptr;
+int x86_cpu_to_node_map_init[NR_CPUS] = {
+ [0 ... NR_CPUS-1] = NUMA_NO_NODE
+};
+DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
+#endif
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
edid_info = boot_params.edid_info;
apm_info.bios = boot_params.apm_bios_info;
ist_info = boot_params.ist_info;
- saved_videomode = boot_params.hdr.vid_mode;
+ saved_video_mode = boot_params.hdr.vid_mode;
if( boot_params.sys_desc_table.length != 0 ) {
set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
machine_id = boot_params.sys_desc_table.table[0];
#endif
ARCH_SETUP
- printk(KERN_INFO "BIOS-provided physical RAM map:\n");
- print_memory_map(memory_setup());
+ setup_memory_map();
copy_edd();
parse_early_param();
- if (user_defined_memmap) {
- printk(KERN_INFO "user-defined physical RAM map:\n");
- print_memory_map("user");
- }
+ finish_e820_parsing();
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
efi_init();
/* update e820 for memory not covered by WB MTRRs */
- find_max_pfn();
+ propagate_e820_map();
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
- find_max_pfn();
+ propagate_e820_map();
max_low_pfn = setup_memory();
+#ifdef CONFIG_KVM_CLOCK
+ kvmclock_init();
+#endif
+
#ifdef CONFIG_VMI
/*
* Must be after max_low_pfn is determined, and before kernel
*/
vmi_init();
#endif
+ kvm_guest_init();
/*
* NOTE: before this point _nobody_ is allowed to allocate
io_delay_init();
+#ifdef CONFIG_X86_SMP
+ /*
+ * setup to use the early static init tables during kernel startup
+ * X86_SMP will exclude sub-arches that don't deal well with it.
+ */
+ x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
+ x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
+#ifdef CONFIG_NUMA
+ x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
+#endif
+#endif
+
#ifdef CONFIG_X86_GENERICARCH
generic_apic_probe();
#endif
get_smp_config();
#endif
- e820_register_memory();
+ e820_setup_gap();
e820_mark_nosave_regions();
#ifdef CONFIG_VT
projects / deliverable / linux.git / blobdiff