#include <linux/dma-mapping.h>
#include <linux/ctype.h>
#include <linux/uaccess.h>
+#include <linux/init_ohci1394_dma.h>
#include <asm/mtrr.h>
#include <asm/uaccess.h>
struct cpuinfo_x86 boot_cpu_data __read_mostly;
EXPORT_SYMBOL(boot_cpu_data);
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
unsigned long mmu_cr4_features;
/* Boot loader ID as an integer, for the benefit of proc_dointvec */
unsigned long bootmap_size, bootmap;
bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
- bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size);
+ bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size,
+ PAGE_SIZE);
if (bootmap == -1L)
panic("Cannot find bootmem map of size %ld\n", bootmap_size);
bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
e820_register_active_regions(0, start_pfn, end_pfn);
free_bootmem_with_active_regions(0, end_pfn);
- reserve_bootmem(bootmap, bootmap_size);
+ reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
}
#endif
(unsigned long)(free_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
- reserve_bootmem(crash_base, crash_size);
+ reserve_bootmem(crash_base, crash_size,
+ BOOTMEM_DEFAULT);
} else
printk(KERN_INFO "crashkernel reservation failed - "
"you have to specify a base address\n");
machine_specific_memory_setup();
}
+/*
+ * setup_arch - architecture-specific boot-time initializations
+ *
+ * Note: On x86_64, fixmaps are ready for use even before this is called.
+ */
void __init setup_arch(char **cmdline_p)
{
unsigned i;
parse_early_param();
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ if (init_ohci1394_dma_early)
+ init_ohci1394_dma_on_all_controllers();
+#endif
+
finish_e820_parsing();
early_gart_iommu_check();
#ifdef CONFIG_SMP
/* setup to use the early static init tables during kernel startup */
- x86_cpu_to_apicid_early_ptr = (void *)&x86_cpu_to_apicid_init;
+ x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
+ x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
#ifdef CONFIG_NUMA
- x86_cpu_to_node_map_early_ptr = (void *)&x86_cpu_to_node_map_init;
+ x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
#endif
- x86_bios_cpu_apicid_early_ptr = (void *)&x86_bios_cpu_apicid_init;
#endif
#ifdef CONFIG_ACPI
acpi_reserve_bootmem();
#endif
- if (efi_enabled) {
- efi_map_memmap();
+ if (efi_enabled)
efi_reserve_bootmem();
- }
/*
* Find and reserve possible boot-time SMP configuration:
early_quirks();
- /*
- * set this early, so we dont allocate cpu0
- * if MADT list doesnt list BSP first
- * mpparse.c/MP_processor_info() allocates logical cpu numbers.
- */
- cpu_set(0, cpu_present_map);
#ifdef CONFIG_ACPI
/*
* Read APIC and some other early information from ACPI tables.
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
* Assumes number of cores is a power of two.
*/
-static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
+static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
unsigned bits;
c->x86_vendor = X86_VENDOR_UNKNOWN;
}
-struct cpu_model_info {
- int vendor;
- int family;
- char *model_names[16];
-};
-
/* Do some early cpuid on the boot CPU to get some parameter that are
needed before check_bugs. Everything advanced is in identify_cpu
below. */
case X86_VENDOR_AMD:
early_init_amd(c);
break;
+ case X86_VENDOR_INTEL:
+ early_init_intel(c);
+ break;
}
}
break;
}
- select_idle_routine(c);
detect_ht(c);
/*
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
+ /* Clear all flags overriden by options */
+ for (i = 0; i < NCAPINTS; i++)
+ c->x86_capability[i] ^= cleared_cpu_caps[i];
+
#ifdef CONFIG_X86_MCE
mcheck_init(c);
#endif
+ select_idle_routine(c);
+
if (c != &boot_cpu_data)
mtrr_ap_init();
#ifdef CONFIG_NUMA
numa_add_cpu(smp_processor_id());
#endif
- switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- early_init_amd(c);
- break;
- case X86_VENDOR_INTEL:
- early_init_intel(c);
- break;
- }
}
+static __init int setup_noclflush(char *arg)
+{
+ setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
+ return 1;
+}
+__setup("noclflush", setup_noclflush);
+
void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
if (c->x86_model_id[0])
printk(KERN_CONT "\n");
}
+static __init int setup_disablecpuid(char *arg)
+{
+ int bit;
+ if (get_option(&arg, &bit) && bit < NCAPINTS*32)
+ setup_clear_cpu_cap(bit);
+ else
+ return 0;
+ return 1;
+}
+__setup("clearcpuid=", setup_disablecpuid);
+
/*
* Get CPU information for use by the procfs.
*/
struct cpuinfo_x86 *c = v;
int cpu = 0, i;
- /*
- * These flag bits must match the definitions in <asm/cpufeature.h>.
- * NULL means this bit is undefined or reserved; either way it doesn't
- * have meaning as far as Linux is concerned. Note that it's important
- * to realize there is a difference between this table and CPUID -- if
- * applications want to get the raw CPUID data, they should access
- * /dev/cpu/<cpu_nr>/cpuid instead.
- */
- static const char *const x86_cap_flags[] = {
- /* Intel-defined */
- "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
- "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
- "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
- "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
- /* AMD-defined */
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, "nx", NULL, "mmxext", NULL,
- NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
- "3dnowext", "3dnow",
-
- /* Transmeta-defined */
- "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Other (Linux-defined) */
- "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
- NULL, NULL, NULL, NULL,
- "constant_tsc", "up", NULL, "arch_perfmon",
- "pebs", "bts", NULL, "sync_rdtsc",
- "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Intel-defined (#2) */
- "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
- "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* VIA/Cyrix/Centaur-defined */
- NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
- "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic",
- "cr8_legacy", "abm", "sse4a", "misalignsse",
- "3dnowprefetch", "osvw", "ibs", "sse5",
- "skinit", "wdt", NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Auxiliary (Linux-defined) */
- "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- };
- static const char *const x86_power_flags[] = {
- "ts", /* temperature sensor */
- "fid", /* frequency id control */
- "vid", /* voltage id control */
- "ttp", /* thermal trip */
- "tm",
- "stc",
- "100mhzsteps",
- "hwpstate",
- "", /* tsc invariant mapped to constant_tsc */
- /* nothing */
- };
-
-
#ifdef CONFIG_SMP
cpu = c->cpu_index;
#endif
{
}
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
projects / deliverable / linux.git / blobdiff