unsigned long saved_video_mode;
-int force_mwait __cpuinitdata;
-
/*
* Early DMI memory
*/
check_enable_amd_mmconf_dmi();
}
-static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+int __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
}
-static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
+void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, eax, ebx, ecx, edx;
}
}
-#ifdef CONFIG_NUMA
-static int __cpuinit nearby_node(int apicid)
-{
- int i, node;
-
- for (i = apicid - 1; i >= 0; i--) {
- node = apicid_to_node[i];
- if (node != NUMA_NO_NODE && node_online(node))
- return node;
- }
- for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
- node = apicid_to_node[i];
- if (node != NUMA_NO_NODE && node_online(node))
- return node;
- }
- return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned bits;
-#ifdef CONFIG_NUMA
- int cpu = smp_processor_id();
- int node = 0;
- unsigned apicid = hard_smp_processor_id();
-#endif
- bits = c->x86_coreid_bits;
-
- /* Low order bits define the core id (index of core in socket) */
- c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->phys_proc_id = c->initial_apicid >> bits;
-
-#ifdef CONFIG_NUMA
- node = c->phys_proc_id;
- if (apicid_to_node[apicid] != NUMA_NO_NODE)
- node = apicid_to_node[apicid];
- if (!node_online(node)) {
- /* Two possibilities here:
- - The CPU is missing memory and no node was created.
- In that case try picking one from a nearby CPU
- - The APIC IDs differ from the HyperTransport node IDs
- which the K8 northbridge parsing fills in.
- Assume they are all increased by a constant offset,
- but in the same order as the HT nodeids.
- If that doesn't result in a usable node fall back to the
- path for the previous case. */
-
- int ht_nodeid = c->initial_apicid;
-
- if (ht_nodeid >= 0 &&
- apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
- node = apicid_to_node[ht_nodeid];
- /* Pick a nearby node */
- if (!node_online(node))
- node = nearby_node(apicid);
- }
- numa_set_node(cpu, node);
-
- printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-
-#endif
-}
-
-#define ENABLE_C1E_MASK 0x18000000
-#define CPUID_PROCESSOR_SIGNATURE 1
-#define CPUID_XFAM 0x0ff00000
-#define CPUID_XFAM_K8 0x00000000
-#define CPUID_XFAM_10H 0x00100000
-#define CPUID_XFAM_11H 0x00200000
-#define CPUID_XMOD 0x000f0000
-#define CPUID_XMOD_REV_F 0x00040000
-
-/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
-static __cpuinit int amd_apic_timer_broken(void)
-{
- u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-
- switch (eax & CPUID_XFAM) {
- case CPUID_XFAM_K8:
- if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
- break;
- case CPUID_XFAM_10H:
- case CPUID_XFAM_11H:
- rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
- if (lo & ENABLE_C1E_MASK)
- return 1;
- break;
- default:
- /* err on the side of caution */
- return 1;
- }
- return 0;
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
- early_init_amd_mc(c);
-
- /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
- if (c->x86_power & (1<<8))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
- unsigned level;
-
-#ifdef CONFIG_SMP
- unsigned long value;
-
- /*
- * Disable TLB flush filter by setting HWCR.FFDIS on K8
- * bit 6 of msr C001_0015
- *
- * Errata 63 for SH-B3 steppings
- * Errata 122 for all steppings (F+ have it disabled by default)
- */
- if (c->x86 == 15) {
- rdmsrl(MSR_K8_HWCR, value);
- value |= 1 << 6;
- wrmsrl(MSR_K8_HWCR, value);
- }
-#endif
-
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_cpu_cap(c, 0*32+31);
-
- /* On C+ stepping K8 rep microcode works well for copy/memset */
- level = cpuid_eax(1);
- if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) ||
- level >= 0x0f58))
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
- if (c->x86 == 0x10 || c->x86 == 0x11)
- set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-
- /* Enable workaround for FXSAVE leak */
- if (c->x86 >= 6)
- set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
- level = get_model_name(c);
- if (!level) {
- switch (c->x86) {
- case 15:
- /* Should distinguish Models here, but this is only
- a fallback anyways. */
- strcpy(c->x86_model_id, "Hammer");
- break;
- }
- }
- display_cacheinfo(c);
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level >= 0x80000008)
- amd_detect_cmp(c);
-
- if (c->extended_cpuid_level >= 0x80000006 &&
- (cpuid_edx(0x80000006) & 0xf000))
- num_cache_leaves = 4;
- else
- num_cache_leaves = 3;
-
- if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11)
- set_cpu_cap(c, X86_FEATURE_K8);
-
- /* MFENCE stops RDTSC speculation */
- set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-
- if (c->x86 == 0x10)
- fam10h_check_enable_mmcfg();
-
- if (amd_apic_timer_broken())
- disable_apic_timer = 1;
-
- if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
- unsigned long long tseg;
-
- /*
- * Split up direct mapping around the TSEG SMM area.
- * Don't do it for gbpages because there seems very little
- * benefit in doing so.
- */
- if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) &&
- (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT)))
- set_memory_4k((unsigned long)__va(tseg), 1);
- }
-}
-
void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
c->x86_vendor = X86_VENDOR_UNKNOWN;
}
+// FIXME: Needs to use cpu_vendor_dev_register
+extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c);
+extern void __cpuinit init_amd(struct cpuinfo_x86 *c);
+
/* Do some early cpuid on the boot CPU to get some parameter that are
needed before check_bugs. Everything advanced is in identify_cpu
below. */
projects / deliverable / linux.git / blobdiff