2009-11-16 Kai Tietz <kai.tietz@onevision.com>
[deliverable/binutils-gdb.git] / bfd / bfd-in2.h
index f3f1cba4491055ce3a21f039b924ddc4c95a80ca..2cf3ba103d9b4d7c168d2bc606c9e69ce05e49b3 100644 (file)
@@ -8,7 +8,7 @@
 /* Main header file for the bfd library -- portable access to object files.
 
    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-   1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+   1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
    Free Software Foundation, Inc.
 
    Contributed by Cygnus Support.
@@ -642,8 +642,8 @@ extern struct bfd_link_needed_list *bfd_elf_get_needed_list
 extern bfd_boolean bfd_elf_get_bfd_needed_list
   (bfd *, struct bfd_link_needed_list **);
 extern bfd_boolean bfd_elf_size_dynamic_sections
-  (bfd *, const char *, const char *, const char *, const char * const *,
-   struct bfd_link_info *, struct bfd_section **,
+  (bfd *, const char *, const char *, const char *, const char *, const char *,
+   const char * const *, struct bfd_link_info *, struct bfd_section **,
    struct bfd_elf_version_tree *);
 extern bfd_boolean bfd_elf_size_dynsym_hash_dynstr
   (bfd *, struct bfd_link_info *);
@@ -1405,6 +1405,13 @@ typedef struct bfd_section
      section size calculated on a previous linker relaxation pass.  */
   bfd_size_type rawsize;
 
+  /* Relaxation table. */
+  struct relax_table *relax;
+
+  /* Count of used relaxation table entries. */
+  int relax_count;
+
+
   /* If this section is going to be output, then this value is the
      offset in *bytes* into the output section of the first byte in the
      input section (byte ==> smallest addressable unit on the
@@ -1494,6 +1501,17 @@ typedef struct bfd_section
   } map_head, map_tail;
 } asection;
 
+/* Relax table contains information about instructions which can
+   be removed by relaxation -- replacing a long address with a 
+   short address.  */
+struct relax_table {
+  /* Address where bytes may be deleted. */
+  bfd_vma addr;
+  
+  /* Number of bytes to be deleted.  */
+  int size;
+};
+
 /* These sections are global, and are managed by BFD.  The application
    and target back end are not permitted to change the values in
    these sections.  New code should use the section_ptr macros rather
@@ -1629,8 +1647,8 @@ extern asection bfd_ind_section;
   /* has_tls_get_addr_call, has_gp_reloc, need_finalize_relax,     */  \
      0,                     0,            0,                           \
                                                                        \
-  /* reloc_done, vma, lma, size, rawsize                           */  \
-     0,          0,   0,   0,    0,                                    \
+  /* reloc_done, vma, lma, size, rawsize, relax, relax_count,      */  \
+     0,          0,   0,   0,    0,       0,     0,                    \
                                                                        \
   /* output_offset, output_section,              alignment_power,  */  \
      0,             (struct bfd_section *) &SEC, 0,                    \
@@ -1862,6 +1880,7 @@ enum bfd_architecture
 #define bfd_mach_ppc64         64
 #define bfd_mach_ppc_403       403
 #define bfd_mach_ppc_403gc     4030
+#define bfd_mach_ppc_405       405
 #define bfd_mach_ppc_505       505
 #define bfd_mach_ppc_601       601
 #define bfd_mach_ppc_602       602
@@ -2028,6 +2047,8 @@ enum bfd_architecture
 #define bfd_mach_cris_v0_v10   255
 #define bfd_mach_cris_v32      32
 #define bfd_mach_cris_v10_v32  1032
+  bfd_arch_rx,        /* Renesas RX.  */
+#define bfd_mach_rx            0x75
   bfd_arch_s390,      /* IBM s390 */
 #define bfd_mach_s390_31       31
 #define bfd_mach_s390_64       64
@@ -2070,6 +2091,7 @@ enum bfd_architecture
 #define bfd_mach_r800           11 /* R800: successor with multiplication.  */
   bfd_arch_lm32,      /* Lattice Mico32 */
 #define bfd_mach_lm32      1
+  bfd_arch_microblaze,/* Xilinx MicroBlaze. */
   bfd_arch_last
   };
 
@@ -3824,6 +3846,32 @@ instructions  */
 instructions  */
   BFD_RELOC_AVR_6_ADIW,
 
+/* Renesas RX Relocations.  */
+  BFD_RELOC_RX_NEG8,
+  BFD_RELOC_RX_NEG16,
+  BFD_RELOC_RX_NEG24,
+  BFD_RELOC_RX_NEG32,
+  BFD_RELOC_RX_16_OP,
+  BFD_RELOC_RX_24_OP,
+  BFD_RELOC_RX_32_OP,
+  BFD_RELOC_RX_8U,
+  BFD_RELOC_RX_16U,
+  BFD_RELOC_RX_24U,
+  BFD_RELOC_RX_DIR3U_PCREL,
+  BFD_RELOC_RX_DIFF,
+  BFD_RELOC_RX_GPRELB,
+  BFD_RELOC_RX_GPRELW,
+  BFD_RELOC_RX_GPRELL,
+  BFD_RELOC_RX_SYM,
+  BFD_RELOC_RX_OP_SUBTRACT,
+  BFD_RELOC_RX_ABS8,
+  BFD_RELOC_RX_ABS16,
+  BFD_RELOC_RX_ABS32,
+  BFD_RELOC_RX_ABS16U,
+  BFD_RELOC_RX_ABS16UW,
+  BFD_RELOC_RX_ABS16UL,
+  BFD_RELOC_RX_RELAX,
+
 /* Direct 12 bit.  */
   BFD_RELOC_390_12,
 
@@ -4512,6 +4560,59 @@ BFD_RELOC_MACH_O_PAIR.  */
 
 /* Mach-O generic relocations.  */
   BFD_RELOC_MACH_O_PAIR,
+
+/* This is a 32 bit reloc for the microblaze that stores the 
+low 16 bits of a value  */
+  BFD_RELOC_MICROBLAZE_32_LO,
+
+/* This is a 32 bit pc-relative reloc for the microblaze that 
+stores the low 16 bits of a value  */
+  BFD_RELOC_MICROBLAZE_32_LO_PCREL,
+
+/* This is a 32 bit reloc for the microblaze that stores a 
+value relative to the read-only small data area anchor  */
+  BFD_RELOC_MICROBLAZE_32_ROSDA,
+
+/* This is a 32 bit reloc for the microblaze that stores a 
+value relative to the read-write small data area anchor  */
+  BFD_RELOC_MICROBLAZE_32_RWSDA,
+
+/* This is a 32 bit reloc for the microblaze to handle 
+expressions of the form "Symbol Op Symbol"  */
+  BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative 
+value in two words (with an imm instruction).  No relocation is 
+done here - only used for relaxing  */
+  BFD_RELOC_MICROBLAZE_64_NONE,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative 
+value in two words (with an imm instruction).  The relocation is
+PC-relative GOT offset  */
+  BFD_RELOC_MICROBLAZE_64_GOTPC,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative 
+value in two words (with an imm instruction).  The relocation is
+GOT offset  */
+  BFD_RELOC_MICROBLAZE_64_GOT,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative 
+value in two words (with an imm instruction).  The relocation is
+PC-relative offset into PLT  */
+  BFD_RELOC_MICROBLAZE_64_PLT,
+
+/* This is a 64 bit reloc that stores the 32 bit GOT relative 
+value in two words (with an imm instruction).  The relocation is
+relative offset from _GLOBAL_OFFSET_TABLE_  */
+  BFD_RELOC_MICROBLAZE_64_GOTOFF,
+
+/* This is a 32 bit reloc that stores the 32 bit GOT relative 
+value in a word.  The relocation is relative offset from  */
+  BFD_RELOC_MICROBLAZE_32_GOTOFF,
+
+/* This is used to tell the dynamic linker to copy the value out of
+the dynamic object into the runtime process image.  */
+  BFD_RELOC_MICROBLAZE_COPY,
   BFD_RELOC_UNUSED };
 typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
 reloc_howto_type *bfd_reloc_type_lookup
@@ -4710,6 +4811,14 @@ bfd_boolean bfd_copy_private_symbol_data
             (ibfd, isymbol, obfd, osymbol))
 
 /* Extracted from bfd.c.  */
+enum bfd_direction
+  {
+    no_direction = 0,
+    read_direction = 1,
+    write_direction = 2,
+    both_direction = 3
+  };
+
 struct bfd
 {
   /* A unique identifier of the BFD  */
@@ -4744,14 +4853,7 @@ struct bfd
   bfd_format format;
 
   /* The direction with which the BFD was opened.  */
-  enum bfd_direction
-    {
-      no_direction = 0,
-      read_direction = 1,
-      write_direction = 2,
-      both_direction = 3
-    }
-  direction;
+  enum bfd_direction direction;
 
   /* Format_specific flags.  */
   flagword flags;
@@ -5590,6 +5692,11 @@ bfd_boolean bfd_set_default_target (const char *name);
 
 const bfd_target *bfd_find_target (const char *target_name, bfd *abfd);
 
+const bfd_target *bfd_get_target_info (const char *target_name,
+    bfd *abfd,
+    bfd_boolean *is_bigendian,
+    int *underscoring,
+    const char **def_target_arch);
 const char ** bfd_target_list (void);
 
 const bfd_target *bfd_search_for_target
This page took 0.027355 seconds and 4 git commands to generate.