/* Main header file for the bfd library -- portable access to object files.
- Copyright 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+ Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
+ Free Software Foundation, Inc.
Contributed by Cygnus Support.
** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them;
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-/* bfd.h -- The only header file required by users of the bfd library
+/* bfd.h -- The only header file required by users of the bfd library
The bfd.h file is generated from bfd-in.h and various .c files; if you
change it, your changes will probably be lost.
/* General rules: functions which are boolean return true on success
and false on failure (unless they're a predicate). -- bfd.doc */
/* I'm sure this is going to break something and someone is going to
- force me to change it. */
+ force me to change it. */
/* typedef enum boolean {false, true} boolean; */
/* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */
/* It gets worse if the host also defines a true/false enum... -sts */
/* And even worse if your compiler has built-in boolean types... -law */
-#if defined (__GNUG__) && (__GNUC_MINOR__ > 5)
+#if defined (__GNUG__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6))
#define TRUE_FALSE_ALREADY_DEFINED
#endif
#ifdef MPW
-/* Pre-emptive strike - get the file with the enum. */
+/* Pre-emptive strike - get the file with the enum. */
#include <Types.h>
#define TRUE_FALSE_ALREADY_DEFINED
#endif /* MPW */
/* FIXME: This should be using off_t from <sys/types.h>.
For now, try to avoid breaking stuff by not including <sys/types.h> here.
This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
- Probably the best long-term answer is to avoid using file_ptr AND off_t
+ Probably the best long-term answer is to avoid using file_ptr AND off_t
in this header file, and to handle this in the BFD implementation
rather than in its interface. */
/* typedef off_t file_ptr; */
use gcc's "long long" type. Otherwise, BFD_HOST_64_BIT must be
defined above. */
+#ifndef BFD_HOST_64_BIT
+# if BFD_HOST_64BIT_LONG
+# define BFD_HOST_64_BIT long
+# define BFD_HOST_U_64_BIT unsigned long
+# else
+# ifdef __GNUC__
+# if __GNUC__ >= 2
+# define BFD_HOST_64_BIT long long
+# define BFD_HOST_U_64_BIT unsigned long long
+# endif /* __GNUC__ >= 2 */
+# endif /* ! defined (__GNUC__) */
+# endif /* ! BFD_HOST_64BIT_LONG */
+#endif /* ! defined (BFD_HOST_64_BIT) */
+
#ifdef BFD64
#ifndef BFD_HOST_64_BIT
-#if BFD_HOST_64BIT_LONG
-#define BFD_HOST_64_BIT long
-#define BFD_HOST_U_64_BIT unsigned long
-#else
-#ifdef __GNUC__
-#define BFD_HOST_64_BIT long long
-#define BFD_HOST_U_64_BIT unsigned long long
-#else /* ! defined (__GNUC__) */
#error No 64 bit integer type available
-#endif /* ! defined (__GNUC__) */
-#endif /* ! BFD_HOST_64BIT_LONG */
#endif /* ! defined (BFD_HOST_64_BIT) */
typedef BFD_HOST_U_64_BIT bfd_vma;
/* Print a bfd_vma x on stream s. */
#define fprintf_vma(s,x) fprintf(s, "%08lx", x)
#define sprintf_vma(s,x) sprintf(s, "%08lx", x)
+
#endif /* not BFD64 */
+
#define printf_vma(x) fprintf_vma(stdout,x)
typedef unsigned int flagword; /* 32 bits of flags */
file_ptr file_offset; /* look here to find the file */
} carsym; /* to make these you call a carsymogen */
-
/* Used in generating armaps (archive tables of contents).
Perhaps just a forward definition would do? */
struct orl { /* output ranlib */
- char **name; /* symbol name */
+ char **name; /* symbol name */
file_ptr pos; /* bfd* or file position */
int namidx; /* index into string table */
};
/* Linenumber stuff */
typedef struct lineno_cache_entry {
- unsigned int line_number; /* Linenumber from start of function*/
+ unsigned int line_number; /* Linenumber from start of function*/
union {
struct symbol_cache_entry *sym; /* Function name */
unsigned long offset; /* Offset into section */
#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
-typedef struct stat stat_type;
+typedef struct stat stat_type;
\f
typedef enum bfd_print_symbol
-{
+{
bfd_print_symbol_name,
bfd_print_symbol_more,
bfd_print_symbol_all
} bfd_print_symbol_type;
-
+
/* Information about a symbol that nm needs. */
typedef struct _symbol_info
char type;
CONST char *name; /* Symbol name. */
unsigned char stab_type; /* Stab type. */
- char stab_other; /* Stab other. */
+ char stab_other; /* Stab other. */
short stab_desc; /* Stab desc. */
CONST char *stab_name; /* String for stab type. */
} symbol_info;
extern int bfd_flush PARAMS ((bfd *abfd));
extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
-
/* Cast from const char * to char * so that caller can assign to
a char * without a warning. */
#define bfd_get_filename(abfd) ((char *) (abfd)->filename)
#define bfd_get_format(abfd) ((abfd)->format)
#define bfd_get_target(abfd) ((abfd)->xvec->name)
#define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
+#define bfd_family_coff(abfd) \
+ (bfd_get_flavour (abfd) == bfd_target_coff_flavour || \
+ bfd_get_flavour (abfd) == bfd_target_xcoff_flavour)
#define bfd_big_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_BIG)
#define bfd_little_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_LITTLE)
#define bfd_header_big_endian(abfd) \
PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
extern struct bfd_link_needed_list *bfd_elf_get_needed_list
PARAMS ((bfd *, struct bfd_link_info *));
+extern boolean bfd_elf_get_bfd_needed_list
+ PARAMS ((bfd *, struct bfd_link_needed_list **));
extern boolean bfd_elf32_size_dynamic_sections
PARAMS ((bfd *, const char *, const char *, boolean, const char *,
const char * const *, struct bfd_link_info *, struct sec **,
const char * const *, struct bfd_link_info *, struct sec **,
struct bfd_elf_version_tree *));
extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
+extern void bfd_elf_set_dt_needed_soname PARAMS ((bfd *, const char *));
extern const char *bfd_elf_get_dt_soname PARAMS ((bfd *));
+extern struct bfd_link_needed_list *bfd_elf_get_runpath_list
+ PARAMS ((bfd *, struct bfd_link_info *));
+
+/* Return an upper bound on the number of bytes required to store a
+ copy of ABFD's program header table entries. Return -1 if an error
+ occurs; bfd_get_error will return an appropriate code. */
+extern long bfd_get_elf_phdr_upper_bound PARAMS ((bfd *abfd));
+
+/* Copy ABFD's program header table entries to *PHDRS. The entries
+ will be stored as an array of Elf_Internal_Phdr structures, as
+ defined in include/elf/internal.h. To find out how large the
+ buffer needs to be, call bfd_get_elf_phdr_upper_bound.
+
+ Return the number of program header table entries read, or -1 if an
+ error occurs; bfd_get_error will return an appropriate code. */
+extern int bfd_get_elf_phdrs PARAMS ((bfd *abfd, void *phdrs));
+
+/* Return the arch_size field of an elf bfd, or -1 if not elf. */
+extern int bfd_get_arch_size PARAMS ((bfd *));
+
+/* Return true if address "naturally" sign extends, or -1 if not elf. */
+extern int bfd_get_sign_extend_vma PARAMS ((bfd *));
+
+extern boolean bfd_m68k_elf32_create_embedded_relocs
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+ char **));
/* SunOS shared library support routines for the linker. */
extern boolean bfd_coff_get_syment
PARAMS ((bfd *, struct symbol_cache_entry *, struct internal_syment *));
+
extern boolean bfd_coff_get_auxent
PARAMS ((bfd *, struct symbol_cache_entry *, int, union internal_auxent *));
+extern boolean bfd_coff_set_symbol_class
+ PARAMS ((bfd *, struct symbol_cache_entry *, unsigned int));
+
+extern boolean bfd_m68k_coff_create_embedded_relocs
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+ char **));
+
+/* ARM Interworking support. Called from linker. */
+extern boolean bfd_arm_allocate_interworking_sections
+ PARAMS ((struct bfd_link_info *));
+
+extern boolean bfd_arm_process_before_allocation
+ PARAMS ((bfd *, struct bfd_link_info *, int));
+
+extern boolean bfd_arm_get_bfd_for_interworking
+ PARAMS ((bfd *, struct bfd_link_info *));
+
+/* PE ARM Interworking support. Called from linker. */
+extern boolean bfd_arm_pe_allocate_interworking_sections
+ PARAMS ((struct bfd_link_info *));
+
+extern boolean bfd_arm_pe_process_before_allocation
+ PARAMS ((bfd *, struct bfd_link_info *, int));
+
+extern boolean bfd_arm_pe_get_bfd_for_interworking
+ PARAMS ((bfd *, struct bfd_link_info *));
+
+/* ELF ARM Interworking support. Called from linker. */
+extern boolean bfd_elf32_arm_allocate_interworking_sections
+ PARAMS ((struct bfd_link_info *));
+
+extern boolean bfd_elf32_arm_process_before_allocation
+ PARAMS ((bfd *, struct bfd_link_info *, int));
+
+extern boolean bfd_elf32_arm_get_bfd_for_interworking
+ PARAMS ((bfd *, struct bfd_link_info *));
+
+/* TI COFF load page support. */
+extern void bfd_ticoff_set_section_load_page
+ PARAMS ((struct sec *, int));
+
+extern int bfd_ticoff_get_section_load_page
+ PARAMS ((struct sec *));
+
/* And more from the source. */
-void
+void
bfd_init PARAMS ((void));
bfd *
bfd *
bfd_openw PARAMS ((CONST char *filename, CONST char *target));
-boolean
+boolean
bfd_close PARAMS ((bfd *abfd));
-boolean
+boolean
bfd_close_all_done PARAMS ((bfd *));
bfd *
bfd_create PARAMS ((CONST char *filename, bfd *templ));
+boolean
+bfd_make_writable PARAMS ((bfd *abfd));
- /* Byte swapping macros for user section data. */
+boolean
+bfd_make_readable PARAMS ((bfd *abfd));
+
+/* Byte swapping macros for user section data. */
#define bfd_put_8(abfd, val, ptr) \
- (*((unsigned char *)(ptr)) = (unsigned char)(val))
+ ((void) (*((unsigned char *)(ptr)) = (unsigned char)(val)))
#define bfd_put_signed_8 \
- bfd_put_8
+ bfd_put_8
#define bfd_get_8(abfd, ptr) \
(*(unsigned char *)(ptr))
#define bfd_get_signed_8(abfd, ptr) \
- ((*(unsigned char *)(ptr) ^ 0x80) - 0x80)
+ ((*(unsigned char *)(ptr) ^ 0x80) - 0x80)
#define bfd_put_16(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
#define bfd_put_signed_16 \
- bfd_put_16
+ bfd_put_16
#define bfd_get_16(abfd, ptr) \
BFD_SEND(abfd, bfd_getx16, (ptr))
#define bfd_get_signed_16(abfd, ptr) \
- BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
+ BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
#define bfd_put_32(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx32, ((val),(ptr)))
#define bfd_put_signed_32 \
- bfd_put_32
+ bfd_put_32
#define bfd_get_32(abfd, ptr) \
BFD_SEND(abfd, bfd_getx32, (ptr))
#define bfd_get_signed_32(abfd, ptr) \
- BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
+ BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
#define bfd_put_64(abfd, val, ptr) \
BFD_SEND(abfd, bfd_putx64, ((val), (ptr)))
#define bfd_put_signed_64 \
- bfd_put_64
+ bfd_put_64
#define bfd_get_64(abfd, ptr) \
BFD_SEND(abfd, bfd_getx64, (ptr))
#define bfd_get_signed_64(abfd, ptr) \
- BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
+ BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
+
+#define bfd_get(bits, abfd, ptr) \
+ ((bits) == 8 ? bfd_get_8 (abfd, ptr) \
+ : (bits) == 16 ? bfd_get_16 (abfd, ptr) \
+ : (bits) == 32 ? bfd_get_32 (abfd, ptr) \
+ : (bits) == 64 ? bfd_get_64 (abfd, ptr) \
+ : (abort (), (bfd_vma) - 1))
+#define bfd_put(bits, abfd, val, ptr) \
+ ((bits) == 8 ? bfd_put_8 (abfd, val, ptr) \
+ : (bits) == 16 ? bfd_put_16 (abfd, val, ptr) \
+ : (bits) == 32 ? bfd_put_32 (abfd, val, ptr) \
+ : (bits) == 64 ? bfd_put_64 (abfd, val, ptr) \
+ : (abort (), (void) 0))
- /* Byte swapping macros for file header data. */
+/* Byte swapping macros for file header data. */
#define bfd_h_put_8(abfd, val, ptr) \
- bfd_put_8 (abfd, val, ptr)
+ bfd_put_8 (abfd, val, ptr)
#define bfd_h_put_signed_8(abfd, val, ptr) \
- bfd_put_8 (abfd, val, ptr)
+ bfd_put_8 (abfd, val, ptr)
#define bfd_h_get_8(abfd, ptr) \
- bfd_get_8 (abfd, ptr)
+ bfd_get_8 (abfd, ptr)
#define bfd_h_get_signed_8(abfd, ptr) \
- bfd_get_signed_8 (abfd, ptr)
+ bfd_get_signed_8 (abfd, ptr)
#define bfd_h_put_16(abfd, val, ptr) \
BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
#define bfd_h_put_signed_16 \
- bfd_h_put_16
+ bfd_h_put_16
#define bfd_h_get_16(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx16,(ptr))
#define bfd_h_get_signed_16(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
+ BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
#define bfd_h_put_32(abfd, val, ptr) \
BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
#define bfd_h_put_signed_32 \
- bfd_h_put_32
+ bfd_h_put_32
#define bfd_h_get_32(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx32,(ptr))
#define bfd_h_get_signed_32(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
+ BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
#define bfd_h_put_64(abfd, val, ptr) \
BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
#define bfd_h_put_signed_64 \
- bfd_h_put_64
+ bfd_h_put_64
#define bfd_h_get_64(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx64,(ptr))
#define bfd_h_get_signed_64(abfd, ptr) \
- BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
+ BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
+
+/* This structure is used for a comdat section, as in PE. A comdat
+ section is associated with a particular symbol. When the linker
+ sees a comdat section, it keeps only one of the sections with a
+ given name and associated with a given symbol. */
+
+struct bfd_comdat_info
+{
+ /* The name of the symbol associated with a comdat section. */
+ const char *name;
+
+ /* The local symbol table index of the symbol associated with a
+ comdat section. This is only meaningful to the object file format
+ specific code; it is not an index into the list returned by
+ bfd_canonicalize_symtab. */
+ long symbol;
+};
typedef struct sec
{
- /* The name of the section; the name isn't a copy, the pointer is
- the same as that passed to bfd_make_section. */
+ /* The name of the section; the name isn't a copy, the pointer is
+ the same as that passed to bfd_make_section. */
+
+ const char *name;
- CONST char *name;
+ /* A unique sequence number. */
- /* Which section is it; 0..nth. */
+ int id;
- int index;
+ /* Which section is it; 0..nth. */
- /* The next section in the list belonging to the BFD, or NULL. */
+ int index;
- struct sec *next;
+ /* The next section in the list belonging to the BFD, or NULL. */
- /* The field flags contains attributes of the section. Some
- flags are read in from the object file, and some are
- synthesized from other information. */
+ struct sec *next;
- flagword flags;
+ /* The field flags contains attributes of the section. Some
+ flags are read in from the object file, and some are
+ synthesized from other information. */
+
+ flagword flags;
#define SEC_NO_FLAGS 0x000
- /* Tells the OS to allocate space for this section when loading.
- This is clear for a section containing debug information
- only. */
+ /* Tells the OS to allocate space for this section when loading.
+ This is clear for a section containing debug information only. */
#define SEC_ALLOC 0x001
- /* Tells the OS to load the section from the file when loading.
- This is clear for a .bss section. */
+ /* Tells the OS to load the section from the file when loading.
+ This is clear for a .bss section. */
#define SEC_LOAD 0x002
- /* The section contains data still to be relocated, so there is
- some relocation information too. */
+ /* The section contains data still to be relocated, so there is
+ some relocation information too. */
#define SEC_RELOC 0x004
-#if 0 /* Obsolete ? */
+#if 0 /* Obsolete ? */
#define SEC_BALIGN 0x008
#endif
- /* A signal to the OS that the section contains read only
- data. */
+ /* A signal to the OS that the section contains read only data. */
#define SEC_READONLY 0x010
- /* The section contains code only. */
+ /* The section contains code only. */
#define SEC_CODE 0x020
- /* The section contains data only. */
+ /* The section contains data only. */
#define SEC_DATA 0x040
- /* The section will reside in ROM. */
+ /* The section will reside in ROM. */
#define SEC_ROM 0x080
- /* The section contains constructor information. This section
- type is used by the linker to create lists of constructors and
- destructors used by <<g++>>. When a back end sees a symbol
- which should be used in a constructor list, it creates a new
- section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
- the symbol to it, and builds a relocation. To build the lists
- of constructors, all the linker has to do is catenate all the
- sections called <<__CTOR_LIST__>> and relocate the data
- contained within - exactly the operations it would peform on
- standard data. */
+ /* The section contains constructor information. This section
+ type is used by the linker to create lists of constructors and
+ destructors used by <<g++>>. When a back end sees a symbol
+ which should be used in a constructor list, it creates a new
+ section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
+ the symbol to it, and builds a relocation. To build the lists
+ of constructors, all the linker has to do is catenate all the
+ sections called <<__CTOR_LIST__>> and relocate the data
+ contained within - exactly the operations it would peform on
+ standard data. */
#define SEC_CONSTRUCTOR 0x100
- /* The section is a constuctor, and should be placed at the
- end of the text, data, or bss section(?). */
+ /* The section is a constructor, and should be placed at the
+ end of the text, data, or bss section(?). */
#define SEC_CONSTRUCTOR_TEXT 0x1100
#define SEC_CONSTRUCTOR_DATA 0x2100
#define SEC_CONSTRUCTOR_BSS 0x3100
- /* The section has contents - a data section could be
- <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
- <<SEC_HAS_CONTENTS>> */
+ /* The section has contents - a data section could be
+ <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
+ <<SEC_HAS_CONTENTS>> */
#define SEC_HAS_CONTENTS 0x200
- /* An instruction to the linker to not output the section
- even if it has information which would normally be written. */
+ /* An instruction to the linker to not output the section
+ even if it has information which would normally be written. */
#define SEC_NEVER_LOAD 0x400
- /* The section is a COFF shared library section. This flag is
- only for the linker. If this type of section appears in
- the input file, the linker must copy it to the output file
- without changing the vma or size. FIXME: Although this
- was originally intended to be general, it really is COFF
- specific (and the flag was renamed to indicate this). It
- might be cleaner to have some more general mechanism to
- allow the back end to control what the linker does with
- sections. */
+ /* The section is a COFF shared library section. This flag is
+ only for the linker. If this type of section appears in
+ the input file, the linker must copy it to the output file
+ without changing the vma or size. FIXME: Although this
+ was originally intended to be general, it really is COFF
+ specific (and the flag was renamed to indicate this). It
+ might be cleaner to have some more general mechanism to
+ allow the back end to control what the linker does with
+ sections. */
#define SEC_COFF_SHARED_LIBRARY 0x800
- /* The section contains common symbols (symbols may be defined
- multiple times, the value of a symbol is the amount of
- space it requires, and the largest symbol value is the one
- used). Most targets have exactly one of these (which we
- translate to bfd_com_section_ptr), but ECOFF has two. */
+ /* The section has GOT references. This flag is only for the
+ linker, and is currently only used by the elf32-hppa back end.
+ It will be set if global offset table references were detected
+ in this section, which indicate to the linker that the section
+ contains PIC code, and must be handled specially when doing a
+ static link. */
+#define SEC_HAS_GOT_REF 0x4000
+
+ /* The section contains common symbols (symbols may be defined
+ multiple times, the value of a symbol is the amount of
+ space it requires, and the largest symbol value is the one
+ used). Most targets have exactly one of these (which we
+ translate to bfd_com_section_ptr), but ECOFF has two. */
#define SEC_IS_COMMON 0x8000
- /* The section contains only debugging information. For
- example, this is set for ELF .debug and .stab sections.
- strip tests this flag to see if a section can be
- discarded. */
+ /* The section contains only debugging information. For
+ example, this is set for ELF .debug and .stab sections.
+ strip tests this flag to see if a section can be
+ discarded. */
#define SEC_DEBUGGING 0x10000
- /* The contents of this section are held in memory pointed to
- by the contents field. This is checked by
- bfd_get_section_contents, and the data is retrieved from
- memory if appropriate. */
+ /* The contents of this section are held in memory pointed to
+ by the contents field. This is checked by bfd_get_section_contents,
+ and the data is retrieved from memory if appropriate. */
#define SEC_IN_MEMORY 0x20000
- /* The contents of this section are to be excluded by the
- linker for executable and shared objects unless those
- objects are to be further relocated. */
+ /* The contents of this section are to be excluded by the
+ linker for executable and shared objects unless those
+ objects are to be further relocated. */
#define SEC_EXCLUDE 0x40000
- /* The contents of this section are to be sorted by the
- based on the address specified in the associated symbol
- table. */
+ /* The contents of this section are to be sorted by the
+ based on the address specified in the associated symbol
+ table. */
#define SEC_SORT_ENTRIES 0x80000
- /* When linking, duplicate sections of the same name should be
- discarded, rather than being combined into a single section as
- is usually done. This is similar to how common symbols are
- handled. See SEC_LINK_DUPLICATES below. */
+ /* When linking, duplicate sections of the same name should be
+ discarded, rather than being combined into a single section as
+ is usually done. This is similar to how common symbols are
+ handled. See SEC_LINK_DUPLICATES below. */
#define SEC_LINK_ONCE 0x100000
- /* If SEC_LINK_ONCE is set, this bitfield describes how the linker
- should handle duplicate sections. */
+ /* If SEC_LINK_ONCE is set, this bitfield describes how the linker
+ should handle duplicate sections. */
#define SEC_LINK_DUPLICATES 0x600000
- /* This value for SEC_LINK_DUPLICATES means that duplicate
- sections with the same name should simply be discarded. */
+ /* This value for SEC_LINK_DUPLICATES means that duplicate
+ sections with the same name should simply be discarded. */
#define SEC_LINK_DUPLICATES_DISCARD 0x0
- /* This value for SEC_LINK_DUPLICATES means that the linker
- should warn if there are any duplicate sections, although
- it should still only link one copy. */
+ /* This value for SEC_LINK_DUPLICATES means that the linker
+ should warn if there are any duplicate sections, although
+ it should still only link one copy. */
#define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
- /* This value for SEC_LINK_DUPLICATES means that the linker
- should warn if any duplicate sections are a different size. */
+ /* This value for SEC_LINK_DUPLICATES means that the linker
+ should warn if any duplicate sections are a different size. */
#define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
- /* This value for SEC_LINK_DUPLICATES means that the linker
- should warn if any duplicate sections contain different
- contents. */
+ /* This value for SEC_LINK_DUPLICATES means that the linker
+ should warn if any duplicate sections contain different
+ contents. */
#define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
- /* This section was created by the linker as part of dynamic
- relocation or other arcane processing. It is skipped when
- going through the first-pass output, trusting that someone
- else up the line will take care of it later. */
+ /* This section was created by the linker as part of dynamic
+ relocation or other arcane processing. It is skipped when
+ going through the first-pass output, trusting that someone
+ else up the line will take care of it later. */
#define SEC_LINKER_CREATED 0x800000
- /* End of section flags. */
+ /* This section should not be subject to garbage collection. */
+#define SEC_KEEP 0x1000000
+
+ /* This section contains "short" data, and should be placed
+ "near" the GP. */
+#define SEC_SMALL_DATA 0x2000000
+
+ /* This section contains data which may be shared with other
+ executables or shared objects. */
+#define SEC_SHARED 0x4000000
+
+ /* When a section with this flag is being linked, then if the size of
+ the input section is less than a page, it should not cross a page
+ boundary. If the size of the input section is one page or more, it
+ should be aligned on a page boundary. */
+#define SEC_BLOCK 0x8000000
+
+ /* Conditionally link this section; do not link if there are no
+ references found to any symbol in the section. */
+#define SEC_CLINK 0x10000000
+
+ /* End of section flags. */
+
+ /* Some internal packed boolean fields. */
+
+ /* See the vma field. */
+ unsigned int user_set_vma : 1;
+
+ /* Whether relocations have been processed. */
+ unsigned int reloc_done : 1;
- /* Some internal packed boolean fields. */
+ /* A mark flag used by some of the linker backends. */
+ unsigned int linker_mark : 1;
- /* See the vma field. */
- unsigned int user_set_vma : 1;
+ /* A mark flag used by some linker backends for garbage collection. */
+ unsigned int gc_mark : 1;
- /* Whether relocations have been processed. */
- unsigned int reloc_done : 1;
+ /* Used by the ELF code to mark sections which have been allocated to segments. */
+ unsigned int segment_mark : 1;
- /* A mark flag used by some of the linker backends. */
- unsigned int linker_mark : 1;
+ /* End of internal packed boolean fields. */
- /* End of internal packed boolean fields. */
+ /* The virtual memory address of the section - where it will be
+ at run time. The symbols are relocated against this. The
+ user_set_vma flag is maintained by bfd; if it's not set, the
+ backend can assign addresses (for example, in <<a.out>>, where
+ the default address for <<.data>> is dependent on the specific
+ target and various flags). */
- /* The virtual memory address of the section - where it will be
- at run time. The symbols are relocated against this. The
- user_set_vma flag is maintained by bfd; if it's not set, the
- backend can assign addresses (for example, in <<a.out>>, where
- the default address for <<.data>> is dependent on the specific
- target and various flags). */
+ bfd_vma vma;
- bfd_vma vma;
+ /* The load address of the section - where it would be in a
+ rom image; really only used for writing section header
+ information. */
- /* The load address of the section - where it would be in a
- rom image; really only used for writing section header
- information. */
+ bfd_vma lma;
- bfd_vma lma;
+ /* The size of the section in octets, as it will be output.
+ Contains a value even if the section has no contents (e.g., the
+ size of <<.bss>>). This will be filled in after relocation. */
- /* The size of the section in bytes, as it will be output.
- contains a value even if the section has no contents (e.g., the
- size of <<.bss>>). This will be filled in after relocation */
+ bfd_size_type _cooked_size;
- bfd_size_type _cooked_size;
+ /* The original size on disk of the section, in octets. Normally this
+ value is the same as the size, but if some relaxing has
+ been done, then this value will be bigger. */
- /* The original size on disk of the section, in bytes. Normally this
- value is the same as the size, but if some relaxing has
- been done, then this value will be bigger. */
+ bfd_size_type _raw_size;
- bfd_size_type _raw_size;
+ /* If this section is going to be output, then this value is the
+ offset in *bytes* into the output section of the first byte in the
+ input section (byte ==> smallest addressable unit on the
+ target). In most cases, if this was going to start at the
+ 100th octet (8-bit quantity) in the output section, this value
+ would be 100. However, if the target byte size is 16 bits
+ (bfd_octets_per_byte is "2"), this value would be 50. */
- /* If this section is going to be output, then this value is the
- offset into the output section of the first byte in the input
- section. E.g., if this was going to start at the 100th byte in
- the output section, this value would be 100. */
+ bfd_vma output_offset;
- bfd_vma output_offset;
+ /* The output section through which to map on output. */
- /* The output section through which to map on output. */
+ struct sec *output_section;
- struct sec *output_section;
+ /* The alignment requirement of the section, as an exponent of 2 -
+ e.g., 3 aligns to 2^3 (or 8). */
- /* The alignment requirement of the section, as an exponent of 2 -
- e.g., 3 aligns to 2^3 (or 8). */
+ unsigned int alignment_power;
- unsigned int alignment_power;
+ /* If an input section, a pointer to a vector of relocation
+ records for the data in this section. */
- /* If an input section, a pointer to a vector of relocation
- records for the data in this section. */
+ struct reloc_cache_entry *relocation;
- struct reloc_cache_entry *relocation;
+ /* If an output section, a pointer to a vector of pointers to
+ relocation records for the data in this section. */
- /* If an output section, a pointer to a vector of pointers to
- relocation records for the data in this section. */
+ struct reloc_cache_entry **orelocation;
- struct reloc_cache_entry **orelocation;
+ /* The number of relocation records in one of the above */
- /* The number of relocation records in one of the above */
+ unsigned reloc_count;
- unsigned reloc_count;
+ /* Information below is back end specific - and not always used
+ or updated. */
- /* Information below is back end specific - and not always used
- or updated. */
+ /* File position of section data. */
- /* File position of section data */
+ file_ptr filepos;
- file_ptr filepos;
+ /* File position of relocation info. */
- /* File position of relocation info */
+ file_ptr rel_filepos;
- file_ptr rel_filepos;
+ /* File position of line data. */
- /* File position of line data */
+ file_ptr line_filepos;
- file_ptr line_filepos;
+ /* Pointer to data for applications. */
- /* Pointer to data for applications */
+ PTR userdata;
- PTR userdata;
+ /* If the SEC_IN_MEMORY flag is set, this points to the actual
+ contents. */
+ unsigned char *contents;
- /* If the SEC_IN_MEMORY flag is set, this points to the actual
- contents. */
- unsigned char *contents;
+ /* Attached line number information. */
- /* Attached line number information */
+ alent *lineno;
- alent *lineno;
+ /* Number of line number records. */
- /* Number of line number records */
+ unsigned int lineno_count;
- unsigned int lineno_count;
+ /* Optional information about a COMDAT entry; NULL if not COMDAT. */
- /* When a section is being output, this value changes as more
- linenumbers are written out */
+ struct bfd_comdat_info *comdat;
- file_ptr moving_line_filepos;
+ /* Points to the kept section if this section is a link-once section,
+ and is discarded. */
+ struct sec *kept_section;
- /* What the section number is in the target world */
+ /* When a section is being output, this value changes as more
+ linenumbers are written out. */
- int target_index;
+ file_ptr moving_line_filepos;
- PTR used_by_bfd;
+ /* What the section number is in the target world. */
- /* If this is a constructor section then here is a list of the
- relocations created to relocate items within it. */
+ int target_index;
- struct relent_chain *constructor_chain;
+ PTR used_by_bfd;
- /* The BFD which owns the section. */
+ /* If this is a constructor section then here is a list of the
+ relocations created to relocate items within it. */
- bfd *owner;
+ struct relent_chain *constructor_chain;
- /* A symbol which points at this section only */
- struct symbol_cache_entry *symbol;
- struct symbol_cache_entry **symbol_ptr_ptr;
+ /* The BFD which owns the section. */
- struct bfd_link_order *link_order_head;
- struct bfd_link_order *link_order_tail;
+ bfd *owner;
+
+ /* A symbol which points at this section only */
+ struct symbol_cache_entry *symbol;
+ struct symbol_cache_entry **symbol_ptr_ptr;
+
+ struct bfd_link_order *link_order_head;
+ struct bfd_link_order *link_order_tail;
} asection ;
- /* These sections are global, and are managed by BFD. The application
- and target back end are not permitted to change the values in
- these sections. New code should use the section_ptr macros rather
- than referring directly to the const sections. The const sections
- may eventually vanish. */
+/* These sections are global, and are managed by BFD. The application
+ and target back end are not permitted to change the values in
+ these sections. New code should use the section_ptr macros rather
+ than referring directly to the const sections. The const sections
+ may eventually vanish. */
#define BFD_ABS_SECTION_NAME "*ABS*"
#define BFD_UND_SECTION_NAME "*UND*"
#define BFD_COM_SECTION_NAME "*COM*"
#define BFD_IND_SECTION_NAME "*IND*"
- /* the absolute section */
+/* the absolute section */
extern const asection bfd_abs_section;
#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
- /* Pointer to the undefined section */
+/* Pointer to the undefined section */
extern const asection bfd_und_section;
#define bfd_und_section_ptr ((asection *) &bfd_und_section)
#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
- /* Pointer to the common section */
+/* Pointer to the common section */
extern const asection bfd_com_section;
#define bfd_com_section_ptr ((asection *) &bfd_com_section)
- /* Pointer to the indirect section */
+/* Pointer to the indirect section */
extern const asection bfd_ind_section;
#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
extern const struct symbol_cache_entry * const bfd_und_symbol;
extern const struct symbol_cache_entry * const bfd_ind_symbol;
#define bfd_get_section_size_before_reloc(section) \
- (section->reloc_done ? (abort(),1): (section)->_raw_size)
+ ((section)->reloc_done ? (abort (), (bfd_size_type) 1) \
+ : (section)->_raw_size)
#define bfd_get_section_size_after_reloc(section) \
- ((section->reloc_done) ? (section)->_cooked_size: (abort(),1))
+ ((section)->reloc_done ? (section)->_cooked_size \
+ : (abort (), (bfd_size_type) 1))
asection *
-bfd_get_section_by_name PARAMS ((bfd *abfd, CONST char *name));
+bfd_get_section_by_name PARAMS ((bfd *abfd, const char *name));
+
+char *
+bfd_get_unique_section_name PARAMS ((bfd *abfd,
+ const char *templat,
+ int *count));
asection *
-bfd_make_section_old_way PARAMS ((bfd *abfd, CONST char *name));
+bfd_make_section_old_way PARAMS ((bfd *abfd, const char *name));
asection *
-bfd_make_section_anyway PARAMS ((bfd *abfd, CONST char *name));
+bfd_make_section_anyway PARAMS ((bfd *abfd, const char *name));
asection *
-bfd_make_section PARAMS ((bfd *, CONST char *name));
+bfd_make_section PARAMS ((bfd *, const char *name));
-boolean
+boolean
bfd_set_section_flags PARAMS ((bfd *abfd, asection *sec, flagword flags));
-void
+void
bfd_map_over_sections PARAMS ((bfd *abfd,
void (*func)(bfd *abfd,
asection *sect,
PTR obj),
PTR obj));
-boolean
+boolean
bfd_set_section_size PARAMS ((bfd *abfd, asection *sec, bfd_size_type val));
-boolean
+boolean
bfd_set_section_contents
PARAMS ((bfd *abfd,
asection *section,
file_ptr offset,
bfd_size_type count));
-boolean
+boolean
bfd_get_section_contents
PARAMS ((bfd *abfd, asection *section, PTR location,
file_ptr offset, bfd_size_type count));
-boolean
+boolean
bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec));
#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
BFD_SEND (obfd, _bfd_copy_private_section_data, \
- (ibfd, isection, obfd, osection))
-enum bfd_architecture
+ (ibfd, isection, obfd, osection))
+void
+_bfd_strip_section_from_output
+ PARAMS ((struct bfd_link_info *info, asection *section));
+
+enum bfd_architecture
{
- bfd_arch_unknown, /* File arch not known */
- bfd_arch_obscure, /* Arch known, not one of these */
- bfd_arch_m68k, /* Motorola 68xxx */
- bfd_arch_vax, /* DEC Vax */
- bfd_arch_i960, /* Intel 960 */
- /* The order of the following is important.
- lower number indicates a machine type that
+ bfd_arch_unknown, /* File arch not known */
+ bfd_arch_obscure, /* Arch known, not one of these */
+ bfd_arch_m68k, /* Motorola 68xxx */
+#define bfd_mach_m68000 1
+#define bfd_mach_m68008 2
+#define bfd_mach_m68010 3
+#define bfd_mach_m68020 4
+#define bfd_mach_m68030 5
+#define bfd_mach_m68040 6
+#define bfd_mach_m68060 7
+#define bfd_mach_cpu32 8
+ bfd_arch_vax, /* DEC Vax */
+ bfd_arch_i960, /* Intel 960 */
+ /* The order of the following is important.
+ lower number indicates a machine type that
only accepts a subset of the instructions
available to machines with higher numbers.
The exception is the "ca", which is
- incompatible with all other machines except
- "core". */
+ incompatible with all other machines except
+ "core". */
#define bfd_mach_i960_core 1
#define bfd_mach_i960_ka_sa 2
#define bfd_mach_i960_mc 4
#define bfd_mach_i960_xa 5
#define bfd_mach_i960_ca 6
-#define bfd_mach_i960_jx 7
+#define bfd_mach_i960_jx 7
#define bfd_mach_i960_hx 8
- bfd_arch_a29k, /* AMD 29000 */
- bfd_arch_sparc, /* SPARC */
-#define bfd_mach_sparc 1
- /* The difference between v8plus and v9 is that v9 is a true 64 bit env. */
-#define bfd_mach_sparc_sparclet 2
-#define bfd_mach_sparc_sparclite 3
-#define bfd_mach_sparc_v8plus 4
-#define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns */
-#define bfd_mach_sparc_v9 6
-#define bfd_mach_sparc_v9a 7 /* with ultrasparc add'ns */
- /* Nonzero if MACH has the v9 instruction set. */
+ bfd_arch_a29k, /* AMD 29000 */
+ bfd_arch_sparc, /* SPARC */
+#define bfd_mach_sparc 1
+/* The difference between v8plus and v9 is that v9 is a true 64 bit env. */
+#define bfd_mach_sparc_sparclet 2
+#define bfd_mach_sparc_sparclite 3
+#define bfd_mach_sparc_v8plus 4
+#define bfd_mach_sparc_v8plusa 5 /* with ultrasparc add'ns */
+#define bfd_mach_sparc_sparclite_le 6
+#define bfd_mach_sparc_v9 7
+#define bfd_mach_sparc_v9a 8 /* with ultrasparc add'ns */
+#define bfd_mach_sparc_v8plusb 9 /* with cheetah add'ns */
+#define bfd_mach_sparc_v9b 10 /* with cheetah add'ns */
+/* Nonzero if MACH has the v9 instruction set. */
#define bfd_mach_sparc_v9_p(mach) \
- ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9a)
- bfd_arch_mips, /* MIPS Rxxxx */
- bfd_arch_i386, /* Intel 386 */
+ ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \
+ && (mach) != bfd_mach_sparc_sparclite_le)
+ bfd_arch_mips, /* MIPS Rxxxx */
+#define bfd_mach_mips3000 3000
+#define bfd_mach_mips3900 3900
+#define bfd_mach_mips4000 4000
+#define bfd_mach_mips4010 4010
+#define bfd_mach_mips4100 4100
+#define bfd_mach_mips4111 4111
+#define bfd_mach_mips4300 4300
+#define bfd_mach_mips4400 4400
+#define bfd_mach_mips4600 4600
+#define bfd_mach_mips4650 4650
+#define bfd_mach_mips5000 5000
+#define bfd_mach_mips6000 6000
+#define bfd_mach_mips8000 8000
+#define bfd_mach_mips10000 10000
+#define bfd_mach_mips4K 32
+#define bfd_mach_mips16 16
+ bfd_arch_i386, /* Intel 386 */
#define bfd_mach_i386_i386 0
#define bfd_mach_i386_i8086 1
- bfd_arch_we32k, /* AT&T WE32xxx */
- bfd_arch_tahoe, /* CCI/Harris Tahoe */
- bfd_arch_i860, /* Intel 860 */
- bfd_arch_romp, /* IBM ROMP PC/RT */
- bfd_arch_alliant, /* Alliant */
- bfd_arch_convex, /* Convex */
- bfd_arch_m88k, /* Motorola 88xxx */
- bfd_arch_pyramid, /* Pyramid Technology */
- bfd_arch_h8300, /* Hitachi H8/300 */
+#define bfd_mach_i386_i386_intel_syntax 2
+ bfd_arch_we32k, /* AT&T WE32xxx */
+ bfd_arch_tahoe, /* CCI/Harris Tahoe */
+ bfd_arch_i860, /* Intel 860 */
+ bfd_arch_i370, /* IBM 360/370 Mainframes */
+ bfd_arch_romp, /* IBM ROMP PC/RT */
+ bfd_arch_alliant, /* Alliant */
+ bfd_arch_convex, /* Convex */
+ bfd_arch_m88k, /* Motorola 88xxx */
+ bfd_arch_pyramid, /* Pyramid Technology */
+ bfd_arch_h8300, /* Hitachi H8/300 */
#define bfd_mach_h8300 1
#define bfd_mach_h8300h 2
#define bfd_mach_h8300s 3
- bfd_arch_powerpc, /* PowerPC */
- bfd_arch_rs6000, /* IBM RS/6000 */
- bfd_arch_hppa, /* HP PA RISC */
- bfd_arch_d10v, /* Mitsubishi D10V */
- /* start-sanitize-d30v */
- bfd_arch_d30v, /* Mitsubishi D30V */
- /* end-sanitize-d30v */
- bfd_arch_z8k, /* Zilog Z8000 */
-#define bfd_mach_z8001 1
-#define bfd_mach_z8002 2
- bfd_arch_h8500, /* Hitachi H8/500 */
- bfd_arch_sh, /* Hitachi SH */
+ bfd_arch_powerpc, /* PowerPC */
+#define bfd_mach_ppc 0
+#define bfd_mach_ppc_403 403
+#define bfd_mach_ppc_403gc 4030
+#define bfd_mach_ppc_505 505
+#define bfd_mach_ppc_601 601
+#define bfd_mach_ppc_602 602
+#define bfd_mach_ppc_603 603
+#define bfd_mach_ppc_ec603e 6031
+#define bfd_mach_ppc_604 604
+#define bfd_mach_ppc_620 620
+#define bfd_mach_ppc_630 630
+#define bfd_mach_ppc_750 750
+#define bfd_mach_ppc_860 860
+#define bfd_mach_ppc_a35 35
+#define bfd_mach_ppc_rs64ii 642
+#define bfd_mach_ppc_rs64iii 643
+#define bfd_mach_ppc_7400 7400
+ bfd_arch_rs6000, /* IBM RS/6000 */
+#define bfd_mach_rs6k 0
+#define bfd_mach_rs6k_rs1 6001
+#define bfd_mach_rs6k_rsc 6003
+#define bfd_mach_rs6k_rs2 6002
+ bfd_arch_hppa, /* HP PA RISC */
+ bfd_arch_d10v, /* Mitsubishi D10V */
+#define bfd_mach_d10v 0
+#define bfd_mach_d10v_ts2 2
+#define bfd_mach_d10v_ts3 3
+ bfd_arch_d30v, /* Mitsubishi D30V */
+ bfd_arch_m68hc11, /* Motorola 68HC11 */
+ bfd_arch_m68hc12, /* Motorola 68HC12 */
+ bfd_arch_z8k, /* Zilog Z8000 */
+#define bfd_mach_z8001 1
+#define bfd_mach_z8002 2
+ bfd_arch_h8500, /* Hitachi H8/500 */
+ bfd_arch_sh, /* Hitachi SH */
#define bfd_mach_sh 0
+#define bfd_mach_sh2 0x20
+#define bfd_mach_sh_dsp 0x2d
#define bfd_mach_sh3 0x30
+#define bfd_mach_sh3_dsp 0x3d
#define bfd_mach_sh3e 0x3e
- /* start-sanitize-sh4 */
#define bfd_mach_sh4 0x40
- /* end-sanitize-sh4 */
- bfd_arch_alpha, /* Dec Alpha */
- bfd_arch_arm, /* Advanced Risc Machines ARM */
-#define bfd_mach_arm_2 1
-#define bfd_mach_arm_2a 2
-#define bfd_mach_arm_3 3
-#define bfd_mach_arm_3M 4
-#define bfd_mach_arm_4 5
-#define bfd_mach_arm_4T 6
- bfd_arch_ns32k, /* National Semiconductors ns32000 */
- bfd_arch_w65, /* WDC 65816 */
- /* start-sanitize-tic80 */
- bfd_arch_tic80, /* TI TMS320c80 (MVP) */
- /* end-sanitize-tic80 */
- bfd_arch_v850, /* NEC V850 */
+ bfd_arch_alpha, /* Dec Alpha */
+#define bfd_mach_alpha_ev4 0x10
+#define bfd_mach_alpha_ev5 0x20
+#define bfd_mach_alpha_ev6 0x30
+ bfd_arch_arm, /* Advanced Risc Machines ARM */
+#define bfd_mach_arm_2 1
+#define bfd_mach_arm_2a 2
+#define bfd_mach_arm_3 3
+#define bfd_mach_arm_3M 4
+#define bfd_mach_arm_4 5
+#define bfd_mach_arm_4T 6
+#define bfd_mach_arm_5 7
+#define bfd_mach_arm_5T 8
+ bfd_arch_ns32k, /* National Semiconductors ns32000 */
+ bfd_arch_w65, /* WDC 65816 */
+ bfd_arch_tic30, /* Texas Instruments TMS320C30 */
+ bfd_arch_tic54x, /* Texas Instruments TMS320C54X */
+ bfd_arch_tic80, /* TI TMS320c80 (MVP) */
+ bfd_arch_v850, /* NEC V850 */
#define bfd_mach_v850 0
- /* start-sanitize-v850e */
-#define bfd_mach_v850e 'E'
- /* end-sanitize-v850e */
- /* start-sanitize-v850eq */
-#define bfd_mach_v850eq 'Q'
- /* end-sanitize-v850eq */
- bfd_arch_arc, /* Argonaut RISC Core */
+#define bfd_mach_v850e 'E'
+#define bfd_mach_v850ea 'A'
+ bfd_arch_arc, /* Argonaut RISC Core */
#define bfd_mach_arc_base 0
- bfd_arch_m32r, /* Mitsubishi M32R/D */
- bfd_arch_mn10200, /* Matsushita MN10200 */
- bfd_arch_mn10300, /* Matsushita MN10300 */
+ bfd_arch_m32r, /* Mitsubishi M32R/D */
+#define bfd_mach_m32r 0 /* backwards compatibility */
+#define bfd_mach_m32rx 'x'
+ bfd_arch_mn10200, /* Matsushita MN10200 */
+ bfd_arch_mn10300, /* Matsushita MN10300 */
+#define bfd_mach_mn10300 300
+#define bfd_mach_am33 330
+ bfd_arch_fr30,
+#define bfd_mach_fr30 0x46523330
+ bfd_arch_mcore,
+ bfd_arch_ia64, /* HP/Intel ia64 */
+#define bfd_mach_ia64_elf64 0
+#define bfd_mach_ia64_elf32 1
+ bfd_arch_pj,
+ bfd_arch_avr, /* Atmel AVR microcontrollers */
+#define bfd_mach_avr1 1
+#define bfd_mach_avr2 2
+#define bfd_mach_avr3 3
+#define bfd_mach_avr4 4
+#define bfd_mach_avr5 5
+ bfd_arch_cris, /* Axis CRIS */
bfd_arch_last
};
-typedef struct bfd_arch_info
+typedef struct bfd_arch_info
{
int bits_per_word;
int bits_per_address;
const char *arch_name;
const char *printable_name;
unsigned int section_align_power;
- /* true if this is the default machine for the architecture */
- boolean the_default;
+ /* True if this is the default machine for the architecture. */
+ boolean the_default;
const struct bfd_arch_info * (*compatible)
- PARAMS ((const struct bfd_arch_info *a,
- const struct bfd_arch_info *b));
+ PARAMS ((const struct bfd_arch_info *a,
+ const struct bfd_arch_info *b));
boolean (*scan) PARAMS ((const struct bfd_arch_info *, const char *));
const bfd_arch_info_type *
bfd_scan_arch PARAMS ((const char *string));
+const char **
+bfd_arch_list PARAMS ((void));
+
const bfd_arch_info_type *
bfd_arch_get_compatible PARAMS ((
const bfd *abfd,
const bfd *bbfd));
-void
+void
bfd_set_arch_info PARAMS ((bfd *abfd, const bfd_arch_info_type *arg));
-enum bfd_architecture
+enum bfd_architecture
bfd_get_arch PARAMS ((bfd *abfd));
-unsigned long
+unsigned long
bfd_get_mach PARAMS ((bfd *abfd));
-unsigned int
+unsigned int
bfd_arch_bits_per_byte PARAMS ((bfd *abfd));
-unsigned int
+unsigned int
bfd_arch_bits_per_address PARAMS ((bfd *abfd));
-const bfd_arch_info_type *
+const bfd_arch_info_type *
bfd_get_arch_info PARAMS ((bfd *abfd));
const bfd_arch_info_type *
bfd_printable_arch_mach
PARAMS ((enum bfd_architecture arch, unsigned long machine));
+unsigned int
+bfd_octets_per_byte PARAMS ((bfd *abfd));
+
+unsigned int
+bfd_arch_mach_octets_per_byte PARAMS ((enum bfd_architecture arch,
+ unsigned long machine));
+
typedef enum bfd_reloc_status
{
- /* No errors detected */
+ /* No errors detected */
bfd_reloc_ok,
- /* The relocation was performed, but there was an overflow. */
+ /* The relocation was performed, but there was an overflow. */
bfd_reloc_overflow,
- /* The address to relocate was not within the section supplied. */
+ /* The address to relocate was not within the section supplied. */
bfd_reloc_outofrange,
- /* Used by special functions */
+ /* Used by special functions */
bfd_reloc_continue,
- /* Unsupported relocation size requested. */
+ /* Unsupported relocation size requested. */
bfd_reloc_notsupported,
- /* Unused */
+ /* Unused */
bfd_reloc_other,
- /* The symbol to relocate against was undefined. */
+ /* The symbol to relocate against was undefined. */
bfd_reloc_undefined,
- /* The relocation was performed, but may not be ok - presently
+ /* The relocation was performed, but may not be ok - presently
generated only when linking i960 coff files with i960 b.out
symbols. If this type is returned, the error_message argument
to bfd_perform_relocation will be set. */
}
bfd_reloc_status_type;
-
typedef struct reloc_cache_entry
{
- /* A pointer into the canonical table of pointers */
+ /* A pointer into the canonical table of pointers */
struct symbol_cache_entry **sym_ptr_ptr;
- /* offset in section */
+ /* offset in section */
bfd_size_type address;
- /* addend for relocation value */
+ /* addend for relocation value */
bfd_vma addend;
- /* Pointer to how to perform the required relocation */
+ /* Pointer to how to perform the required relocation */
reloc_howto_type *howto;
} arelent;
enum complain_overflow
{
- /* Do not complain on overflow. */
+ /* Do not complain on overflow. */
complain_overflow_dont,
- /* Complain if the bitfield overflows, whether it is considered
- as signed or unsigned. */
+ /* Complain if the bitfield overflows, whether it is considered
+ as signed or unsigned. */
complain_overflow_bitfield,
- /* Complain if the value overflows when considered as signed
- number. */
+ /* Complain if the value overflows when considered as signed
+ number. */
complain_overflow_signed,
- /* Complain if the value overflows when considered as an
- unsigned number. */
+ /* Complain if the value overflows when considered as an
+ unsigned number. */
complain_overflow_unsigned
};
struct reloc_howto_struct
{
- /* The type field has mainly a documentary use - the back end can
+ /* The type field has mainly a documentary use - the back end can
do what it wants with it, though normally the back end's
external idea of what a reloc number is stored
in this field. For example, a PC relative word relocation
in a coff environment has the type 023 - because that's
- what the outside world calls a R_PCRWORD reloc. */
+ what the outside world calls a R_PCRWORD reloc. */
unsigned int type;
- /* The value the final relocation is shifted right by. This drops
+ /* The value the final relocation is shifted right by. This drops
unwanted data from the relocation. */
unsigned int rightshift;
- /* The size of the item to be relocated. This is *not* a
- power-of-two measure. To get the number of bytes operated
- on by a type of relocation, use bfd_get_reloc_size. */
+ /* The size of the item to be relocated. This is *not* a
+ power-of-two measure. To get the number of bytes operated
+ on by a type of relocation, use bfd_get_reloc_size. */
int size;
- /* The number of bits in the item to be relocated. This is used
- when doing overflow checking. */
+ /* The number of bits in the item to be relocated. This is used
+ when doing overflow checking. */
unsigned int bitsize;
- /* Notes that the relocation is relative to the location in the
+ /* Notes that the relocation is relative to the location in the
data section of the addend. The relocation function will
subtract from the relocation value the address of the location
- being relocated. */
+ being relocated. */
boolean pc_relative;
- /* The bit position of the reloc value in the destination.
- The relocated value is left shifted by this amount. */
+ /* The bit position of the reloc value in the destination.
+ The relocated value is left shifted by this amount. */
unsigned int bitpos;
- /* What type of overflow error should be checked for when
- relocating. */
+ /* What type of overflow error should be checked for when
+ relocating. */
enum complain_overflow complain_on_overflow;
- /* If this field is non null, then the supplied function is
+ /* If this field is non null, then the supplied function is
called rather than the normal function. This allows really
strange relocation methods to be accomodated (e.g., i960 callj
- instructions). */
+ instructions). */
bfd_reloc_status_type (*special_function)
- PARAMS ((bfd *abfd,
- arelent *reloc_entry,
+ PARAMS ((bfd *abfd,
+ arelent *reloc_entry,
struct symbol_cache_entry *symbol,
PTR data,
asection *input_section,
bfd *output_bfd,
char **error_message));
- /* The textual name of the relocation type. */
+ /* The textual name of the relocation type. */
char *name;
- /* When performing a partial link, some formats must modify the
- relocations rather than the data - this flag signals this.*/
+ /* Some formats record a relocation addend in the section contents
+ rather than with the relocation. For ELF formats this is the
+ distinction between USE_REL and USE_RELA (though the code checks
+ for USE_REL == 1/0). The value of this field is TRUE if the
+ addend is recorded with the section contents; when performing a
+ partial link (ld -r) the section contents (the data) will be
+ modified. The value of this field is FALSE if addends are
+ recorded with the relocation (in arelent.addend); when performing
+ a partial link the relocation will be modified.
+ All relocations for all ELF USE_RELA targets should set this field
+ to FALSE (values of TRUE should be looked on with suspicion).
+ However, the converse is not true: not all relocations of all ELF
+ USE_REL targets set this field to TRUE. Why this is so is peculiar
+ to each particular target. For relocs that aren't used in partial
+ links (e.g. GOT stuff) it doesn't matter what this is set to. */
boolean partial_inplace;
- /* The src_mask selects which parts of the read in data
+ /* The src_mask selects which parts of the read in data
are to be used in the relocation sum. E.g., if this was an 8 bit
- bit of data which we read and relocated, this would be
+ byte of data which we read and relocated, this would be
0x000000ff. When we have relocs which have an addend, such as
sun4 extended relocs, the value in the offset part of a
relocating field is garbage so we never use it. In this case
- the mask would be 0x00000000. */
+ the mask would be 0x00000000. */
bfd_vma src_mask;
- /* The dst_mask selects which parts of the instruction are replaced
+ /* The dst_mask selects which parts of the instruction are replaced
into the instruction. In most cases src_mask == dst_mask,
except in the above special case, where dst_mask would be
0x000000ff, and src_mask would be 0x00000000. */
bfd_vma dst_mask;
- /* When some formats create PC relative instructions, they leave
+ /* When some formats create PC relative instructions, they leave
the value of the pc of the place being relocated in the offset
slot of the instruction, so that a PC relative relocation can
be made just by adding in an ordinary offset (e.g., sun3 a.out).
{(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
+#define EMPTY_HOWTO(C) \
+ HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false)
+
#define HOWTO_PREPARE(relocation, symbol) \
{ \
if (symbol != (asymbol *)NULL) { \
} \
} \
}
-int
+unsigned int
bfd_get_reloc_size PARAMS ((reloc_howto_type *));
typedef struct relent_chain {
} arelent_chain;
bfd_reloc_status_type
+bfd_check_overflow
+ PARAMS ((enum complain_overflow how,
+ unsigned int bitsize,
+ unsigned int rightshift,
+ unsigned int addrsize,
+ bfd_vma relocation));
+
+bfd_reloc_status_type
+
bfd_perform_relocation
PARAMS ((bfd *abfd,
arelent *reloc_entry,
enum bfd_reloc_code_real {
_dummy_first_bfd_reloc_code_real,
-
-/* Basic absolute relocations of N bits. */
+/* Basic absolute relocations of N bits. */
BFD_RELOC_64,
BFD_RELOC_32,
BFD_RELOC_26,
of the relocation itself; sometimes they are relative to the start of
the section containing the relocation. It depends on the specific target.
-The 24-bit relocation is used in some Intel 960 configurations. */
+The 24-bit relocation is used in some Intel 960 configurations. */
BFD_RELOC_64_PCREL,
BFD_RELOC_32_PCREL,
BFD_RELOC_24_PCREL,
BFD_RELOC_12_PCREL,
BFD_RELOC_8_PCREL,
-/* For ELF. */
+/* For ELF. */
BFD_RELOC_32_GOT_PCREL,
BFD_RELOC_16_GOT_PCREL,
BFD_RELOC_8_GOT_PCREL,
BFD_RELOC_HI16_S_PLTOFF,
BFD_RELOC_8_PLTOFF,
-/* Relocations used by 68K ELF. */
+/* Relocations used by 68K ELF. */
BFD_RELOC_68K_GLOB_DAT,
BFD_RELOC_68K_JMP_SLOT,
BFD_RELOC_68K_RELATIVE,
-/* Linkage-table relative. */
+/* Linkage-table relative. */
BFD_RELOC_32_BASEREL,
BFD_RELOC_16_BASEREL,
BFD_RELOC_LO16_BASEREL,
BFD_RELOC_8_BASEREL,
BFD_RELOC_RVA,
-/* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
+/* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
BFD_RELOC_8_FFnn,
/* These PC-relative relocations are stored as word displacements --
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
signed 16-bit displacement is used on the MIPS, and the 23-bit
-displacement is used on the Alpha. */
+displacement is used on the Alpha. */
BFD_RELOC_32_PCREL_S2,
BFD_RELOC_16_PCREL_S2,
BFD_RELOC_23_PCREL_S2,
/* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
-the target word. These are used on the SPARC. */
+the target word. These are used on the SPARC. */
BFD_RELOC_HI22,
BFD_RELOC_LO10,
/* For systems that allocate a Global Pointer register, these are
displacements off that register. These relocation types are
handled specially, because the value the register will have is
-decided relatively late. */
+decided relatively late. */
BFD_RELOC_GPREL16,
BFD_RELOC_GPREL32,
-/* Reloc types used for i960/b.out. */
+/* Reloc types used for i960/b.out. */
BFD_RELOC_I960_CALLJ,
/* SPARC ELF relocations. There is probably some overlap with other
-relocation types already defined. */
+relocation types already defined. */
BFD_RELOC_NONE,
BFD_RELOC_SPARC_WDISP22,
BFD_RELOC_SPARC22,
BFD_RELOC_SPARC_RELATIVE,
BFD_RELOC_SPARC_UA32,
-/* I think these are specific to SPARC a.out (e.g., Sun 4). */
+/* I think these are specific to SPARC a.out (e.g., Sun 4). */
BFD_RELOC_SPARC_BASE13,
BFD_RELOC_SPARC_BASE22,
-/* Some relocations we're using for SPARC V9 -- subject to change. */
+/* SPARC64 relocations */
#define BFD_RELOC_SPARC_64 BFD_RELOC_64
BFD_RELOC_SPARC_10,
BFD_RELOC_SPARC_11,
BFD_RELOC_SPARC_PC_LM22,
BFD_RELOC_SPARC_WDISP16,
BFD_RELOC_SPARC_WDISP19,
- BFD_RELOC_SPARC_GLOB_JMP,
BFD_RELOC_SPARC_7,
BFD_RELOC_SPARC_6,
BFD_RELOC_SPARC_5,
+#define BFD_RELOC_SPARC_DISP64 BFD_RELOC_64_PCREL
+ BFD_RELOC_SPARC_PLT64,
+ BFD_RELOC_SPARC_HIX22,
+ BFD_RELOC_SPARC_LOX10,
+ BFD_RELOC_SPARC_H44,
+ BFD_RELOC_SPARC_M44,
+ BFD_RELOC_SPARC_L44,
+ BFD_RELOC_SPARC_REGISTER,
+
+/* SPARC little endian relocation */
+ BFD_RELOC_SPARC_REV32,
/* Alpha ECOFF and ELF relocations. Some of these treat the symbol or
"addend" in some special way.
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
writing; when reading, it will be the absolute section symbol. The
addend is the displacement in bytes of the "lda" instruction from
-the "ldah" instruction (which is at the address of this reloc). */
+the "ldah" instruction (which is at the address of this reloc). */
BFD_RELOC_ALPHA_GPDISP_HI16,
/* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
with GPDISP_HI16 relocs. The addend is ignored when writing the
relocations out, and is filled in with the file's GP value on
-reading, for convenience. */
+reading, for convenience. */
BFD_RELOC_ALPHA_GPDISP_LO16,
/* The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
relocation except that there is no accompanying GPDISP_LO16
-relocation. */
+relocation. */
BFD_RELOC_ALPHA_GPDISP,
/* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2 - byte-manipulation (byte offset reg)
3 - jsr (target of branch)
-The GNU linker currently doesn't do any of this optimizing. */
+The GNU linker currently doesn't do any of this optimizing. */
BFD_RELOC_ALPHA_LITERAL,
BFD_RELOC_ALPHA_ELF_LITERAL,
BFD_RELOC_ALPHA_LITUSE,
+/* The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to
+process the explicit !<reloc>!sequence relocations, and are mapped
+into the normal relocations at the end of processing. */
+ BFD_RELOC_ALPHA_USER_LITERAL,
+ BFD_RELOC_ALPHA_USER_LITUSE_BASE,
+ BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF,
+ BFD_RELOC_ALPHA_USER_LITUSE_JSR,
+ BFD_RELOC_ALPHA_USER_GPDISP,
+ BFD_RELOC_ALPHA_USER_GPRELHIGH,
+ BFD_RELOC_ALPHA_USER_GPRELLOW,
+
/* The HINT relocation indicates a value that should be filled into the
"hint" field of a jmp/jsr/ret instruction, for possible branch-
-prediction logic which may be provided on some processors. */
+prediction logic which may be provided on some processors. */
BFD_RELOC_ALPHA_HINT,
/* The LINKAGE relocation outputs a linkage pair in the object file,
-which is filled by the linker. */
+which is filled by the linker. */
BFD_RELOC_ALPHA_LINKAGE,
/* The CODEADDR relocation outputs a STO_CA in the object file,
-which is filled by the linker. */
+which is filled by the linker. */
BFD_RELOC_ALPHA_CODEADDR,
/* Bits 27..2 of the relocation address shifted right 2 bits;
-simple reloc otherwise. */
+simple reloc otherwise. */
BFD_RELOC_MIPS_JMP,
-/* The MIPS16 jump instruction. */
+/* The MIPS16 jump instruction. */
BFD_RELOC_MIPS16_JMP,
-/* MIPS16 GP relative reloc. */
+/* MIPS16 GP relative reloc. */
BFD_RELOC_MIPS16_GPREL,
-/* High 16 bits of 32-bit value; simple reloc. */
+/* High 16 bits of 32-bit value; simple reloc. */
BFD_RELOC_HI16,
/* High 16 bits of 32-bit value but the low 16 bits will be sign
extended and added to form the final result. If the low 16
bits form a negative number, we need to add one to the high value
-to compensate for the borrow when the low bits are added. */
+to compensate for the borrow when the low bits are added. */
BFD_RELOC_HI16_S,
-/* Low 16 bits. */
+/* Low 16 bits. */
BFD_RELOC_LO16,
-/* Like BFD_RELOC_HI16_S, but PC relative. */
+/* Like BFD_RELOC_HI16_S, but PC relative. */
BFD_RELOC_PCREL_HI16_S,
-/* Like BFD_RELOC_LO16, but PC relative. */
+/* Like BFD_RELOC_LO16, but PC relative. */
BFD_RELOC_PCREL_LO16,
-/* Relocation relative to the global pointer. */
+/* Relocation relative to the global pointer. */
#define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
-/* Relocation against a MIPS literal section. */
+/* Relocation against a MIPS literal section. */
BFD_RELOC_MIPS_LITERAL,
-/* MIPS ELF relocations. */
+/* MIPS ELF relocations. */
BFD_RELOC_MIPS_GOT16,
BFD_RELOC_MIPS_CALL16,
#define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
BFD_RELOC_MIPS_GOT_LO16,
BFD_RELOC_MIPS_CALL_HI16,
BFD_RELOC_MIPS_CALL_LO16,
+ BFD_RELOC_MIPS_SUB,
+ BFD_RELOC_MIPS_GOT_PAGE,
+ BFD_RELOC_MIPS_GOT_OFST,
+ BFD_RELOC_MIPS_GOT_DISP,
/* i386/elf relocations */
BFD_RELOC_386_GOT32,
BFD_RELOC_NS32K_DISP_16_PCREL,
BFD_RELOC_NS32K_DISP_32_PCREL,
-/* Power(rs6000) and PowerPC relocations. */
+/* Picojava relocs. Not all of these appear in object files. */
+ BFD_RELOC_PJ_CODE_HI16,
+ BFD_RELOC_PJ_CODE_LO16,
+ BFD_RELOC_PJ_CODE_DIR16,
+ BFD_RELOC_PJ_CODE_DIR32,
+ BFD_RELOC_PJ_CODE_REL16,
+ BFD_RELOC_PJ_CODE_REL32,
+
+/* Power(rs6000) and PowerPC relocations. */
BFD_RELOC_PPC_B26,
BFD_RELOC_PPC_BA26,
BFD_RELOC_PPC_TOC16,
BFD_RELOC_PPC_EMB_BIT_FLD,
BFD_RELOC_PPC_EMB_RELSDA,
+/* IBM 370/390 relocations */
+ BFD_RELOC_I370_D12,
+
/* The type of reloc used to build a contructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
-It generally does map to one of the other relocation types. */
+It generally does map to one of the other relocation types. */
BFD_RELOC_CTOR,
/* ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
-not stored in the instruction. */
+not stored in the instruction. */
BFD_RELOC_ARM_PCREL_BRANCH,
+/* ARM 26 bit pc-relative branch. The lowest bit must be zero and is
+not stored in the instruction. The 2nd lowest bit comes from a 1 bit
+field in the instruction. */
+ BFD_RELOC_ARM_PCREL_BLX,
+
+/* Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
+not stored in the instruction. The 2nd lowest bit comes from a 1 bit
+field in the instruction. */
+ BFD_RELOC_THUMB_PCREL_BLX,
+
/* These relocs are only used within the ARM assembler. They are not
-(at present) written to any object files. */
+(at present) written to any object files. */
BFD_RELOC_ARM_IMMEDIATE,
+ BFD_RELOC_ARM_ADRL_IMMEDIATE,
BFD_RELOC_ARM_OFFSET_IMM,
BFD_RELOC_ARM_SHIFT_IMM,
BFD_RELOC_ARM_SWI,
BFD_RELOC_ARM_THUMB_IMM,
BFD_RELOC_ARM_THUMB_SHIFT,
BFD_RELOC_ARM_THUMB_OFFSET,
-
-/* Hitachi SH relocs. Not all of these appear in object files. */
+ BFD_RELOC_ARM_GOT12,
+ BFD_RELOC_ARM_GOT32,
+ BFD_RELOC_ARM_JUMP_SLOT,
+ BFD_RELOC_ARM_COPY,
+ BFD_RELOC_ARM_GLOB_DAT,
+ BFD_RELOC_ARM_PLT32,
+ BFD_RELOC_ARM_RELATIVE,
+ BFD_RELOC_ARM_GOTOFF,
+ BFD_RELOC_ARM_GOTPC,
+
+/* Hitachi SH relocs. Not all of these appear in object files. */
BFD_RELOC_SH_PCDISP8BY2,
BFD_RELOC_SH_PCDISP12BY2,
BFD_RELOC_SH_IMM4,
BFD_RELOC_SH_CODE,
BFD_RELOC_SH_DATA,
BFD_RELOC_SH_LABEL,
+ BFD_RELOC_SH_LOOP_START,
+ BFD_RELOC_SH_LOOP_END,
+ BFD_RELOC_SH_COPY,
+ BFD_RELOC_SH_GLOB_DAT,
+ BFD_RELOC_SH_JMP_SLOT,
+ BFD_RELOC_SH_RELATIVE,
+ BFD_RELOC_SH_GOTPC,
/* Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
-be zero and is not stored in the instruction. */
+be zero and is not stored in the instruction. */
BFD_RELOC_THUMB_PCREL_BRANCH9,
BFD_RELOC_THUMB_PCREL_BRANCH12,
BFD_RELOC_THUMB_PCREL_BRANCH23,
/* Argonaut RISC Core (ARC) relocs.
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
not stored in the instruction. The high 20 bits are installed in bits 26
-through 7 of the instruction. */
+through 7 of the instruction. */
BFD_RELOC_ARC_B22_PCREL,
/* ARC 26 bit absolute branch. The lowest two bits must be zero and are not
stored in the instruction. The high 24 bits are installed in bits 23
-through 0. */
+through 0. */
BFD_RELOC_ARC_B26,
/* Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
-assumed to be 0. */
+assumed to be 0. */
BFD_RELOC_D10V_10_PCREL_R,
/* Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0. This is the same as the previous reloc
except it is in the left container, i.e.,
-shifted left 15 bits. */
+shifted left 15 bits. */
BFD_RELOC_D10V_10_PCREL_L,
/* This is an 18-bit reloc with the right 2 bits
-assumed to be 0. */
+assumed to be 0. */
BFD_RELOC_D10V_18,
/* This is an 18-bit reloc with the right 2 bits
-assumed to be 0. */
+assumed to be 0. */
BFD_RELOC_D10V_18_PCREL,
-/* start-sanitize-d30v */
-
/* Mitsubishi D30V relocs.
-This is a 6-bit absolute reloc. */
+This is a 6-bit absolute reloc. */
BFD_RELOC_D30V_6,
-/* Mitsubishi D30V relocs.
-This is a 12-bit absolute reloc with the
-right 3 bitsassumed to be 0. */
+/* This is a 6-bit pc-relative reloc with
+the right 3 bits assumed to be 0. */
+ BFD_RELOC_D30V_9_PCREL,
+
+/* This is a 6-bit pc-relative reloc with
+the right 3 bits assumed to be 0. Same
+as the previous reloc but on the right side
+of the container. */
+ BFD_RELOC_D30V_9_PCREL_R,
+
+/* This is a 12-bit absolute reloc with the
+right 3 bitsassumed to be 0. */
BFD_RELOC_D30V_15,
-/* Mitsubishi D30V relocs.
-This is a 12-bit pc-relative reloc with
-the right 3 bits assumed to be 0. */
+/* This is a 12-bit pc-relative reloc with
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_15_PCREL,
-/* This is an 18-bit absolute reloc with
-the right 3 bits assumed to be 0. */
+/* This is a 12-bit pc-relative reloc with
+the right 3 bits assumed to be 0. Same
+as the previous reloc but on the right side
+of the container. */
+ BFD_RELOC_D30V_15_PCREL_R,
+
+/* This is an 18-bit absolute reloc with
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_21,
-/* This is an 18-bit pc-relative reloc with
-the right 3 bits assumed to be 0. */
+/* This is an 18-bit pc-relative reloc with
+the right 3 bits assumed to be 0. */
BFD_RELOC_D30V_21_PCREL,
-/* This is a 32-bit absolute reloc. */
+/* This is an 18-bit pc-relative reloc with
+the right 3 bits assumed to be 0. Same
+as the previous reloc but on the right side
+of the container. */
+ BFD_RELOC_D30V_21_PCREL_R,
+
+/* This is a 32-bit absolute reloc. */
BFD_RELOC_D30V_32,
-/* This is a 32-bit pc-relative reloc. */
+/* This is a 32-bit pc-relative reloc. */
BFD_RELOC_D30V_32_PCREL,
-/* end-sanitize-d30v */
-
/* Mitsubishi M32R relocs.
-This is a 24 bit absolute address. */
+This is a 24 bit absolute address. */
BFD_RELOC_M32R_24,
-/* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
+/* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
BFD_RELOC_M32R_10_PCREL,
-/* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
+/* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
BFD_RELOC_M32R_18_PCREL,
-/* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
+/* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
BFD_RELOC_M32R_26_PCREL,
/* This is a 16-bit reloc containing the high 16 bits of an address
-used when the lower 16 bits are treated as unsigned. */
+used when the lower 16 bits are treated as unsigned. */
BFD_RELOC_M32R_HI16_ULO,
/* This is a 16-bit reloc containing the high 16 bits of an address
-used when the lower 16 bits are treated as signed. */
+used when the lower 16 bits are treated as signed. */
BFD_RELOC_M32R_HI16_SLO,
-/* This is a 16-bit reloc containing the lower 16 bits of an address. */
+/* This is a 16-bit reloc containing the lower 16 bits of an address. */
BFD_RELOC_M32R_LO16,
/* This is a 16-bit reloc containing the small data area offset for use in
-add3, load, and store instructions. */
+add3, load, and store instructions. */
BFD_RELOC_M32R_SDA16,
/* This is a 9-bit reloc */
/* This is a 22-bit reloc */
BFD_RELOC_V850_22_PCREL,
- BFD_RELOC_V850_SDA_16_16_OFFSET, /* A 16 bit reloc in the small data area. */
- BFD_RELOC_V850_SDA_15_16_OFFSET, /* A 16 bit reloc (of which only 15 bits are used) in the small data area. */
- BFD_RELOC_V850_ZDA_16_16_OFFSET, /* A 16 bit reloc in the zero data area. */
- BFD_RELOC_V850_ZDA_15_16_OFFSET, /* A 16 bit reloc (of which only 15 bits are used) in the zero data area. */
- BFD_RELOC_V850_TDA_6_8_OFFSET, /* An 8 bit reloc (of which only 6 bits are used) in the tiny data area. */
- BFD_RELOC_V850_TDA_7_8_OFFSET, /* An 8 bit reloc (of which only 7 bits are used) in the tiny data area. */
- BFD_RELOC_V850_TDA_7_7_OFFSET, /* A 7 bit reloc in the tiny data area. */
-/* start-sanitize-v850e */
- BFD_RELOC_V850_TDA_4_5_OFFSET, /* A 5 bit reloc (of which only 4 bits are used) in the tiny data area. */
- BFD_RELOC_V850_TDA_4_4_OFFSET, /* A 4 bit reloc in the tiny data area. */
- BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET, /* A 16 bit reloc (but the bits are not contiguous) in the small data area. */
- BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET, /* A 16 bit reloc (but the bits are not contiguous) in the zero data area. */
-/* end-sanitize-v850e */
+/* This is a 16 bit offset from the short data area pointer. */
+ BFD_RELOC_V850_SDA_16_16_OFFSET,
+
+/* This is a 16 bit offset (of which only 15 bits are used) from the
+short data area pointer. */
+ BFD_RELOC_V850_SDA_15_16_OFFSET,
+
+/* This is a 16 bit offset from the zero data area pointer. */
+ BFD_RELOC_V850_ZDA_16_16_OFFSET,
+
+/* This is a 16 bit offset (of which only 15 bits are used) from the
+zero data area pointer. */
+ BFD_RELOC_V850_ZDA_15_16_OFFSET,
+
+/* This is an 8 bit offset (of which only 6 bits are used) from the
+tiny data area pointer. */
+ BFD_RELOC_V850_TDA_6_8_OFFSET,
+
+/* This is an 8bit offset (of which only 7 bits are used) from the tiny
+data area pointer. */
+ BFD_RELOC_V850_TDA_7_8_OFFSET,
+
+/* This is a 7 bit offset from the tiny data area pointer. */
+ BFD_RELOC_V850_TDA_7_7_OFFSET,
+
+/* This is a 16 bit offset from the tiny data area pointer. */
+ BFD_RELOC_V850_TDA_16_16_OFFSET,
+
+/* This is a 5 bit offset (of which only 4 bits are used) from the tiny
+data area pointer. */
+ BFD_RELOC_V850_TDA_4_5_OFFSET,
+
+/* This is a 4 bit offset from the tiny data area pointer. */
+ BFD_RELOC_V850_TDA_4_4_OFFSET,
+
+/* This is a 16 bit offset from the short data area pointer, with the
+bits placed non-contigously in the instruction. */
+ BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET,
+
+/* This is a 16 bit offset from the zero data area pointer, with the
+bits placed non-contigously in the instruction. */
+ BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET,
+
+/* This is a 6 bit offset from the call table base pointer. */
+ BFD_RELOC_V850_CALLT_6_7_OFFSET,
+
+/* This is a 16 bit offset from the call table base pointer. */
+ BFD_RELOC_V850_CALLT_16_16_OFFSET,
/* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
-instruction. */
+instruction. */
BFD_RELOC_MN10300_32_PCREL,
/* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
-instruction. */
+instruction. */
BFD_RELOC_MN10300_16_PCREL,
+
+/* This is a 8bit DP reloc for the tms320c30, where the most
+significant 8 bits of a 24 bit word are placed into the least
+significant 8 bits of the opcode. */
+ BFD_RELOC_TIC30_LDP,
+
+/* This is a 7bit reloc for the tms320c54x, where the least
+significant 7 bits of a 16 bit word are placed into the least
+significant 7 bits of the opcode. */
+ BFD_RELOC_TIC54X_PARTLS7,
+
+/* This is a 9bit DP reloc for the tms320c54x, where the most
+significant 9 bits of a 16 bit word are placed into the least
+significant 9 bits of the opcode. */
+ BFD_RELOC_TIC54X_PARTMS9,
+
+/* This is an extended address 23-bit reloc for the tms320c54x. */
+ BFD_RELOC_TIC54X_23,
+
+/* This is a 16-bit reloc for the tms320c54x, where the least
+significant 16 bits of a 23-bit extended address are placed into
+the opcode. */
+ BFD_RELOC_TIC54X_16_OF_23,
+
+/* This is a reloc for the tms320c54x, where the most
+significant 7 bits of a 23-bit extended address are placed into
+the opcode. */
+ BFD_RELOC_TIC54X_MS7_OF_23,
+
+/* This is a 48 bit reloc for the FR30 that stores 32 bits. */
+ BFD_RELOC_FR30_48,
+
+/* This is a 32 bit reloc for the FR30 that stores 20 bits split up into
+two sections. */
+ BFD_RELOC_FR30_20,
+
+/* This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
+4 bits. */
+ BFD_RELOC_FR30_6_IN_4,
+
+/* This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
+into 8 bits. */
+ BFD_RELOC_FR30_8_IN_8,
+
+/* This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
+into 8 bits. */
+ BFD_RELOC_FR30_9_IN_8,
+
+/* This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
+into 8 bits. */
+ BFD_RELOC_FR30_10_IN_8,
+
+/* This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
+short offset into 8 bits. */
+ BFD_RELOC_FR30_9_PCREL,
+
+/* This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
+short offset into 11 bits. */
+ BFD_RELOC_FR30_12_PCREL,
+
+/* Motorola Mcore relocations. */
+ BFD_RELOC_MCORE_PCREL_IMM8BY4,
+ BFD_RELOC_MCORE_PCREL_IMM11BY2,
+ BFD_RELOC_MCORE_PCREL_IMM4BY2,
+ BFD_RELOC_MCORE_PCREL_32,
+ BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2,
+ BFD_RELOC_MCORE_RVA,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit pc relative
+short offset into 7 bits. */
+ BFD_RELOC_AVR_7_PCREL,
+
+/* This is a 16 bit reloc for the AVR that stores 13 bit pc relative
+short offset into 12 bits. */
+ BFD_RELOC_AVR_13_PCREL,
+
+/* This is a 16 bit reloc for the AVR that stores 17 bit value (usually
+program memory address) into 16 bits. */
+ BFD_RELOC_AVR_16_PM,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
+data memory address) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_LO8_LDI,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
+of data memory address) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_HI8_LDI,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
+of program memory address) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_HH8_LDI,
+
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
+(usually data memory address) into 8 bit immediate value of SUBI insn. */
+ BFD_RELOC_AVR_LO8_LDI_NEG,
+
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
+(high 8 bit of data memory address) into 8 bit immediate value of
+SUBI insn. */
+ BFD_RELOC_AVR_HI8_LDI_NEG,
+
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
+(most high 8 bit of program memory address) into 8 bit immediate value
+of LDI or SUBI insn. */
+ BFD_RELOC_AVR_HH8_LDI_NEG,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
+command address) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_LO8_LDI_PM,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
+of command address) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_HI8_LDI_PM,
+
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
+of command address) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_HH8_LDI_PM,
+
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
+(usually command address) into 8 bit immediate value of SUBI insn. */
+ BFD_RELOC_AVR_LO8_LDI_PM_NEG,
+
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
+(high 8 bit of 16 bit command address) into 8 bit immediate value
+of SUBI insn. */
+ BFD_RELOC_AVR_HI8_LDI_PM_NEG,
+
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
+(high 6 bit of 22 bit command address) into 8 bit immediate
+value of SUBI insn. */
+ BFD_RELOC_AVR_HH8_LDI_PM_NEG,
+
+/* This is a 32 bit reloc for the AVR that stores 23 bit value
+into 22 bits. */
+ BFD_RELOC_AVR_CALL,
+
+/* These two relocations are used by the linker to determine which of
+the entries in a C++ virtual function table are actually used. When
+the --gc-sections option is given, the linker will zero out the entries
+that are not used, so that the code for those functions need not be
+included in the output.
+
+VTABLE_INHERIT is a zero-space relocation used to describe to the
+linker the inheritence tree of a C++ virtual function table. The
+relocation's symbol should be the parent class' vtable, and the
+relocation should be located at the child vtable.
+
+VTABLE_ENTRY is a zero-space relocation that describes the use of a
+virtual function table entry. The reloc's symbol should refer to the
+table of the class mentioned in the code. Off of that base, an offset
+describes the entry that is being used. For Rela hosts, this offset
+is stored in the reloc's addend. For Rel hosts, we are forced to put
+this offset in the reloc's section offset. */
+ BFD_RELOC_VTABLE_INHERIT,
+ BFD_RELOC_VTABLE_ENTRY,
+
+/* Intel IA64 Relocations. */
+ BFD_RELOC_IA64_IMM14,
+ BFD_RELOC_IA64_IMM22,
+ BFD_RELOC_IA64_IMM64,
+ BFD_RELOC_IA64_DIR32MSB,
+ BFD_RELOC_IA64_DIR32LSB,
+ BFD_RELOC_IA64_DIR64MSB,
+ BFD_RELOC_IA64_DIR64LSB,
+ BFD_RELOC_IA64_GPREL22,
+ BFD_RELOC_IA64_GPREL64I,
+ BFD_RELOC_IA64_GPREL32MSB,
+ BFD_RELOC_IA64_GPREL32LSB,
+ BFD_RELOC_IA64_GPREL64MSB,
+ BFD_RELOC_IA64_GPREL64LSB,
+ BFD_RELOC_IA64_LTOFF22,
+ BFD_RELOC_IA64_LTOFF64I,
+ BFD_RELOC_IA64_PLTOFF22,
+ BFD_RELOC_IA64_PLTOFF64I,
+ BFD_RELOC_IA64_PLTOFF64MSB,
+ BFD_RELOC_IA64_PLTOFF64LSB,
+ BFD_RELOC_IA64_FPTR64I,
+ BFD_RELOC_IA64_FPTR32MSB,
+ BFD_RELOC_IA64_FPTR32LSB,
+ BFD_RELOC_IA64_FPTR64MSB,
+ BFD_RELOC_IA64_FPTR64LSB,
+ BFD_RELOC_IA64_PCREL21B,
+ BFD_RELOC_IA64_PCREL21BI,
+ BFD_RELOC_IA64_PCREL21M,
+ BFD_RELOC_IA64_PCREL21F,
+ BFD_RELOC_IA64_PCREL22,
+ BFD_RELOC_IA64_PCREL60B,
+ BFD_RELOC_IA64_PCREL64I,
+ BFD_RELOC_IA64_PCREL32MSB,
+ BFD_RELOC_IA64_PCREL32LSB,
+ BFD_RELOC_IA64_PCREL64MSB,
+ BFD_RELOC_IA64_PCREL64LSB,
+ BFD_RELOC_IA64_LTOFF_FPTR22,
+ BFD_RELOC_IA64_LTOFF_FPTR64I,
+ BFD_RELOC_IA64_LTOFF_FPTR64MSB,
+ BFD_RELOC_IA64_LTOFF_FPTR64LSB,
+ BFD_RELOC_IA64_SEGBASE,
+ BFD_RELOC_IA64_SEGREL32MSB,
+ BFD_RELOC_IA64_SEGREL32LSB,
+ BFD_RELOC_IA64_SEGREL64MSB,
+ BFD_RELOC_IA64_SEGREL64LSB,
+ BFD_RELOC_IA64_SECREL32MSB,
+ BFD_RELOC_IA64_SECREL32LSB,
+ BFD_RELOC_IA64_SECREL64MSB,
+ BFD_RELOC_IA64_SECREL64LSB,
+ BFD_RELOC_IA64_REL32MSB,
+ BFD_RELOC_IA64_REL32LSB,
+ BFD_RELOC_IA64_REL64MSB,
+ BFD_RELOC_IA64_REL64LSB,
+ BFD_RELOC_IA64_LTV32MSB,
+ BFD_RELOC_IA64_LTV32LSB,
+ BFD_RELOC_IA64_LTV64MSB,
+ BFD_RELOC_IA64_LTV64LSB,
+ BFD_RELOC_IA64_IPLTMSB,
+ BFD_RELOC_IA64_IPLTLSB,
+ BFD_RELOC_IA64_EPLTMSB,
+ BFD_RELOC_IA64_EPLTLSB,
+ BFD_RELOC_IA64_COPY,
+ BFD_RELOC_IA64_TPREL22,
+ BFD_RELOC_IA64_TPREL64MSB,
+ BFD_RELOC_IA64_TPREL64LSB,
+ BFD_RELOC_IA64_LTOFF_TP22,
+ BFD_RELOC_IA64_LTOFF22X,
+ BFD_RELOC_IA64_LDXMOV,
+
+/* Motorola 68HC11 reloc.
+This is the 8 bits high part of an absolute address. */
+ BFD_RELOC_M68HC11_HI8,
+
+/* Motorola 68HC11 reloc.
+This is the 8 bits low part of an absolute address. */
+ BFD_RELOC_M68HC11_LO8,
+
+/* Motorola 68HC11 reloc.
+This is the 3 bits of a value. */
+ BFD_RELOC_M68HC11_3B,
+
+/* These relocs are only used within the CRIS assembler. They are not
+(at present) written to any object files. */
+ BFD_RELOC_CRIS_BDISP8,
+ BFD_RELOC_CRIS_UNSIGNED_5,
+ BFD_RELOC_CRIS_SIGNED_6,
+ BFD_RELOC_CRIS_UNSIGNED_6,
+ BFD_RELOC_CRIS_UNSIGNED_4,
+
+/* Intel i860 Relocations. */
+ BFD_RELOC_860_COPY,
+ BFD_RELOC_860_GLOB_DAT,
+ BFD_RELOC_860_JUMP_SLOT,
+ BFD_RELOC_860_RELATIVE,
+ BFD_RELOC_860_PC26,
+ BFD_RELOC_860_PLT26,
+ BFD_RELOC_860_PC16,
+ BFD_RELOC_860_LOW0,
+ BFD_RELOC_860_SPLIT0,
+ BFD_RELOC_860_LOW1,
+ BFD_RELOC_860_SPLIT1,
+ BFD_RELOC_860_LOW2,
+ BFD_RELOC_860_SPLIT2,
+ BFD_RELOC_860_LOW3,
+ BFD_RELOC_860_LOGOT0,
+ BFD_RELOC_860_SPGOT0,
+ BFD_RELOC_860_LOGOT1,
+ BFD_RELOC_860_SPGOT1,
+ BFD_RELOC_860_LOGOTOFF0,
+ BFD_RELOC_860_SPGOTOFF0,
+ BFD_RELOC_860_LOGOTOFF1,
+ BFD_RELOC_860_SPGOTOFF1,
+ BFD_RELOC_860_LOGOTOFF2,
+ BFD_RELOC_860_LOGOTOFF3,
+ BFD_RELOC_860_LOPC,
+ BFD_RELOC_860_HIGHADJ,
+ BFD_RELOC_860_HAGOT,
+ BFD_RELOC_860_HAGOTOFF,
+ BFD_RELOC_860_HAPC,
+ BFD_RELOC_860_HIGH,
+ BFD_RELOC_860_HIGOT,
+ BFD_RELOC_860_HIGOTOFF,
BFD_RELOC_UNUSED };
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
reloc_howto_type *
const char *
bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code));
-
typedef struct symbol_cache_entry
{
- /* A pointer to the BFD which owns the symbol. This information
- is necessary so that a back end can work out what additional
- information (invisible to the application writer) is carried
- with the symbol.
+ /* A pointer to the BFD which owns the symbol. This information
+ is necessary so that a back end can work out what additional
+ information (invisible to the application writer) is carried
+ with the symbol.
- This field is *almost* redundant, since you can use section->owner
- instead, except that some symbols point to the global sections
- bfd_{abs,com,und}_section. This could be fixed by making
- these globals be per-bfd (or per-target-flavor). FIXME. */
+ This field is *almost* redundant, since you can use section->owner
+ instead, except that some symbols point to the global sections
+ bfd_{abs,com,und}_section. This could be fixed by making
+ these globals be per-bfd (or per-target-flavor). FIXME. */
- struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
+ struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
- /* The text of the symbol. The name is left alone, and not copied; the
- application may not alter it. */
+ /* The text of the symbol. The name is left alone, and not copied; the
+ application may not alter it. */
CONST char *name;
- /* The value of the symbol. This really should be a union of a
+ /* The value of the symbol. This really should be a union of a
numeric value with a pointer, since some flags indicate that
a pointer to another symbol is stored here. */
symvalue value;
- /* Attributes of a symbol: */
+ /* Attributes of a symbol: */
#define BSF_NO_FLAGS 0x00
- /* The symbol has local scope; <<static>> in <<C>>. The value
- is the offset into the section of the data. */
-#define BSF_LOCAL 0x01
+ /* The symbol has local scope; <<static>> in <<C>>. The value
+ is the offset into the section of the data. */
+#define BSF_LOCAL 0x01
- /* The symbol has global scope; initialized data in <<C>>. The
- value is the offset into the section of the data. */
-#define BSF_GLOBAL 0x02
+ /* The symbol has global scope; initialized data in <<C>>. The
+ value is the offset into the section of the data. */
+#define BSF_GLOBAL 0x02
- /* The symbol has global scope and is exported. The value is
- the offset into the section of the data. */
-#define BSF_EXPORT BSF_GLOBAL /* no real difference */
+ /* The symbol has global scope and is exported. The value is
+ the offset into the section of the data. */
+#define BSF_EXPORT BSF_GLOBAL /* no real difference */
- /* A normal C symbol would be one of:
- <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
- <<BSF_GLOBAL>> */
+ /* A normal C symbol would be one of:
+ <<BSF_LOCAL>>, <<BSF_FORT_COMM>>, <<BSF_UNDEFINED>> or
+ <<BSF_GLOBAL>> */
- /* The symbol is a debugging record. The value has an arbitary
- meaning. */
-#define BSF_DEBUGGING 0x08
+ /* The symbol is a debugging record. The value has an arbitary
+ meaning, unless BSF_DEBUGGING_RELOC is also set. */
+#define BSF_DEBUGGING 0x08
- /* The symbol denotes a function entry point. Used in ELF,
- perhaps others someday. */
+ /* The symbol denotes a function entry point. Used in ELF,
+ perhaps others someday. */
#define BSF_FUNCTION 0x10
- /* Used by the linker. */
+ /* Used by the linker. */
#define BSF_KEEP 0x20
#define BSF_KEEP_G 0x40
- /* A weak global symbol, overridable without warnings by
- a regular global symbol of the same name. */
+ /* A weak global symbol, overridable without warnings by
+ a regular global symbol of the same name. */
#define BSF_WEAK 0x80
- /* This symbol was created to point to a section, e.g. ELF's
- STT_SECTION symbols. */
+ /* This symbol was created to point to a section, e.g. ELF's
+ STT_SECTION symbols. */
#define BSF_SECTION_SYM 0x100
- /* The symbol used to be a common symbol, but now it is
- allocated. */
+ /* The symbol used to be a common symbol, but now it is
+ allocated. */
#define BSF_OLD_COMMON 0x200
- /* The default value for common data. */
+ /* The default value for common data. */
#define BFD_FORT_COMM_DEFAULT_VALUE 0
- /* In some files the type of a symbol sometimes alters its
- location in an output file - ie in coff a <<ISFCN>> symbol
- which is also <<C_EXT>> symbol appears where it was
- declared and not at the end of a section. This bit is set
- by the target BFD part to convey this information. */
+ /* In some files the type of a symbol sometimes alters its
+ location in an output file - ie in coff a <<ISFCN>> symbol
+ which is also <<C_EXT>> symbol appears where it was
+ declared and not at the end of a section. This bit is set
+ by the target BFD part to convey this information. */
#define BSF_NOT_AT_END 0x400
- /* Signal that the symbol is the label of constructor section. */
+ /* Signal that the symbol is the label of constructor section. */
#define BSF_CONSTRUCTOR 0x800
- /* Signal that the symbol is a warning symbol. The name is a
- warning. The name of the next symbol is the one to warn about;
- if a reference is made to a symbol with the same name as the next
- symbol, a warning is issued by the linker. */
+ /* Signal that the symbol is a warning symbol. The name is a
+ warning. The name of the next symbol is the one to warn about;
+ if a reference is made to a symbol with the same name as the next
+ symbol, a warning is issued by the linker. */
#define BSF_WARNING 0x1000
- /* Signal that the symbol is indirect. This symbol is an indirect
- pointer to the symbol with the same name as the next symbol. */
+ /* Signal that the symbol is indirect. This symbol is an indirect
+ pointer to the symbol with the same name as the next symbol. */
#define BSF_INDIRECT 0x2000
- /* BSF_FILE marks symbols that contain a file name. This is used
- for ELF STT_FILE symbols. */
+ /* BSF_FILE marks symbols that contain a file name. This is used
+ for ELF STT_FILE symbols. */
#define BSF_FILE 0x4000
- /* Symbol is from dynamic linking information. */
-#define BSF_DYNAMIC 0x8000
+ /* Symbol is from dynamic linking information. */
+#define BSF_DYNAMIC 0x8000
- /* The symbol denotes a data object. Used in ELF, and perhaps
+ /* The symbol denotes a data object. Used in ELF, and perhaps
others someday. */
-#define BSF_OBJECT 0x10000
+#define BSF_OBJECT 0x10000
+
+ /* This symbol is a debugging symbol. The value is the offset
+ into the section of the data. BSF_DEBUGGING should be set
+ as well. */
+#define BSF_DEBUGGING_RELOC 0x20000
flagword flags;
- /* A pointer to the section to which this symbol is
- relative. This will always be non NULL, there are special
+ /* A pointer to the section to which this symbol is
+ relative. This will always be non NULL, there are special
sections for undefined and absolute symbols. */
struct sec *section;
- /* Back end special data. */
+ /* Back end special data. */
union
{
PTR p;
} asymbol;
#define bfd_get_symtab_upper_bound(abfd) \
BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
-boolean
+boolean
bfd_is_local_label PARAMS ((bfd *abfd, asymbol *sym));
-boolean
+boolean
bfd_is_local_label_name PARAMS ((bfd *abfd, const char *name));
#define bfd_is_local_label_name(abfd, name) \
#define bfd_canonicalize_symtab(abfd, location) \
BFD_SEND (abfd, _bfd_canonicalize_symtab,\
(abfd, location))
-boolean
+boolean
bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count));
-void
+void
bfd_print_symbol_vandf PARAMS ((PTR file, asymbol *symbol));
#define bfd_make_empty_symbol(abfd) \
BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
#define bfd_make_debug_symbol(abfd,ptr,size) \
BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
-int
+int
bfd_decode_symclass PARAMS ((asymbol *symbol));
-void
+boolean
+bfd_is_undefined_symclass PARAMS ((int symclass));
+
+void
bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret));
-boolean
+boolean
bfd_copy_private_symbol_data PARAMS ((bfd *ibfd, asymbol *isym, bfd *obfd, asymbol *osym));
#define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \
BFD_SEND (obfd, _bfd_copy_private_symbol_data, \
- (ibfd, isymbol, obfd, osymbol))
-struct _bfd
+ (ibfd, isymbol, obfd, osymbol))
+struct _bfd
{
- /* The filename the application opened the BFD with. */
- CONST char *filename;
+ /* The filename the application opened the BFD with. */
+ CONST char *filename;
- /* A pointer to the target jump table. */
+ /* A pointer to the target jump table. */
const struct bfd_target *xvec;
- /* To avoid dragging too many header files into every file that
+ /* To avoid dragging too many header files into every file that
includes `<<bfd.h>>', IOSTREAM has been declared as a "char
*", and MTIME as a "long". Their correct types, to which they
are cast when used, are "FILE *" and "time_t". The iostream
to a bfd_in_memory struct. */
PTR iostream;
- /* Is the file descriptor being cached? That is, can it be closed as
+ /* Is the file descriptor being cached? That is, can it be closed as
needed, and re-opened when accessed later? */
boolean cacheable;
- /* Marks whether there was a default target specified when the
+ /* Marks whether there was a default target specified when the
BFD was opened. This is used to select which matching algorithm
- to use to choose the back end. */
+ to use to choose the back end. */
boolean target_defaulted;
- /* The caching routines use these to maintain a
+ /* The caching routines use these to maintain a
least-recently-used list of BFDs */
struct _bfd *lru_prev, *lru_next;
- /* When a file is closed by the caching routines, BFD retains
+ /* When a file is closed by the caching routines, BFD retains
state information on the file here: */
- file_ptr where;
+ file_ptr where;
- /* and here: (``once'' means at least once) */
+ /* and here: (``once'' means at least once) */
boolean opened_once;
- /* Set if we have a locally maintained mtime value, rather than
+ /* Set if we have a locally maintained mtime value, rather than
getting it from the file each time: */
boolean mtime_set;
- /* File modified time, if mtime_set is true: */
+ /* File modified time, if mtime_set is true: */
- long mtime;
+ long mtime;
- /* Reserved for an unimplemented file locking extension.*/
+ /* Reserved for an unimplemented file locking extension.*/
int ifd;
- /* The format which belongs to the BFD. (object, core, etc.) */
+ /* The format which belongs to the BFD. (object, core, etc.) */
bfd_format format;
- /* The direction the BFD was opened with*/
+ /* The direction the BFD was opened with*/
enum bfd_direction {no_direction = 0,
read_direction = 1,
write_direction = 2,
both_direction = 3} direction;
- /* Format_specific flags*/
+ /* Format_specific flags*/
- flagword flags;
+ flagword flags;
- /* Currently my_archive is tested before adding origin to
+ /* Currently my_archive is tested before adding origin to
anything. I believe that this can become always an add of
origin, with origin set to 0 for non archive files. */
- file_ptr origin;
+ file_ptr origin;
- /* Remember when output has begun, to stop strange things
- from happening. */
+ /* Remember when output has begun, to stop strange things
+ from happening. */
boolean output_has_begun;
- /* Pointer to linked list of sections*/
+ /* Pointer to linked list of sections*/
struct sec *sections;
- /* The number of sections */
+ /* The number of sections */
unsigned int section_count;
- /* Stuff only useful for object files:
- The start address. */
+ /* Stuff only useful for object files:
+ The start address. */
bfd_vma start_address;
- /* Used for input and output*/
+ /* Used for input and output*/
unsigned int symcount;
- /* Symbol table for output BFD (with symcount entries) */
- struct symbol_cache_entry **outsymbols;
+ /* Symbol table for output BFD (with symcount entries) */
+ struct symbol_cache_entry **outsymbols;
- /* Pointer to structure which contains architecture information*/
+ /* Pointer to structure which contains architecture information*/
const struct bfd_arch_info *arch_info;
- /* Stuff only useful for archives:*/
- PTR arelt_data;
- struct _bfd *my_archive; /* The containing archive BFD. */
- struct _bfd *next; /* The next BFD in the archive. */
- struct _bfd *archive_head; /* The first BFD in the archive. */
- boolean has_armap;
+ /* Stuff only useful for archives:*/
+ PTR arelt_data;
+ struct _bfd *my_archive; /* The containing archive BFD. */
+ struct _bfd *next; /* The next BFD in the archive. */
+ struct _bfd *archive_head; /* The first BFD in the archive. */
+ boolean has_armap;
- /* A chain of BFD structures involved in a link. */
+ /* A chain of BFD structures involved in a link. */
struct _bfd *link_next;
- /* A field used by _bfd_generic_link_add_archive_symbols. This will
+ /* A field used by _bfd_generic_link_add_archive_symbols. This will
be used only for archive elements. */
int archive_pass;
- /* Used by the back end to hold private data. */
+ /* Used by the back end to hold private data. */
- union
+ union
{
struct aout_data_struct *aout_data;
struct artdata *aout_ar_data;
struct nlm_obj_tdata *nlm_obj_data;
struct bout_data_struct *bout_data;
struct sun_core_struct *sun_core_data;
+ struct sco5_core_struct *sco5_core_data;
struct trad_core_struct *trad_core_data;
struct som_data_struct *som_data;
struct hpux_core_struct *hpux_core_data;
struct netbsd_core_struct *netbsd_core_data;
PTR any;
} tdata;
-
- /* Used by the application to hold private data*/
+
+ /* Used by the application to hold private data*/
PTR usrdata;
- /* Where all the allocated stuff under this BFD goes. This is a
+ /* Where all the allocated stuff under this BFD goes. This is a
struct objalloc *, but we use PTR to avoid requiring the inclusion of
objalloc.h. */
PTR memory;
bfd_error_invalid_error_code
} bfd_error_type;
-bfd_error_type
+bfd_error_type
bfd_get_error PARAMS ((void));
-void
+void
bfd_set_error PARAMS ((bfd_error_type error_tag));
CONST char *
bfd_errmsg PARAMS ((bfd_error_type error_tag));
-void
+void
bfd_perror PARAMS ((CONST char *message));
typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...));
-bfd_error_handler_type
+bfd_error_handler_type
bfd_set_error_handler PARAMS ((bfd_error_handler_type));
-void
+void
bfd_set_error_program_name PARAMS ((const char *));
-long
+bfd_error_handler_type
+bfd_get_error_handler PARAMS ((void));
+
+long
bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
-long
+long
bfd_canonicalize_reloc
PARAMS ((bfd *abfd,
asection *sec,
arelent **loc,
- asymbol **syms));
+ asymbol **syms));
-void
+void
bfd_set_reloc
PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count)
-
+
);
-boolean
+boolean
bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags));
-boolean
+int
+bfd_get_arch_size PARAMS ((bfd *abfd));
+
+int
+bfd_get_sign_extend_vma PARAMS ((bfd *abfd));
+
+boolean
bfd_set_start_address PARAMS ((bfd *abfd, bfd_vma vma));
-long
+long
bfd_get_mtime PARAMS ((bfd *abfd));
-long
+long
bfd_get_size PARAMS ((bfd *abfd));
-int
+int
bfd_get_gp_size PARAMS ((bfd *abfd));
-void
+void
bfd_set_gp_size PARAMS ((bfd *abfd, int i));
-bfd_vma
+bfd_vma
bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base));
-boolean
+boolean
bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
#define bfd_copy_private_bfd_data(ibfd, obfd) \
BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
- (ibfd, obfd))
-boolean
+ (ibfd, obfd))
+boolean
bfd_merge_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
#define bfd_merge_private_bfd_data(ibfd, obfd) \
BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
- (ibfd, obfd))
-boolean
+ (ibfd, obfd))
+boolean
bfd_set_private_flags PARAMS ((bfd *abfd, flagword flags));
#define bfd_set_private_flags(abfd, flags) \
BFD_SEND (abfd, _bfd_set_private_flags, \
- (abfd, flags))
+ (abfd, flags))
#define bfd_sizeof_headers(abfd, reloc) \
BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line))
- /* Do these three do anything useful at all, for any back end? */
+ /* Do these three do anything useful at all, for any back end? */
#define bfd_debug_info_start(abfd) \
BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
#define bfd_debug_info_accumulate(abfd, section) \
BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
-
#define bfd_stat_arch_elt(abfd, stat) \
BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
#define bfd_relax_section(abfd, section, link_info, again) \
BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
+#define bfd_gc_sections(abfd, link_info) \
+ BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
+
#define bfd_link_hash_table_create(abfd) \
- BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
+ BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
#define bfd_link_add_symbols(abfd, info) \
- BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
+ BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
#define bfd_final_link(abfd, info) \
- BFD_SEND (abfd, _bfd_final_link, (abfd, info))
+ BFD_SEND (abfd, _bfd_final_link, (abfd, info))
#define bfd_free_cached_info(abfd) \
BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
#define bfd_get_dynamic_symtab_upper_bound(abfd) \
- BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
+ BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
#define bfd_print_private_bfd_data(abfd, file)\
- BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file))
+ BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file))
#define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
- BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
+ BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
#define bfd_get_dynamic_reloc_upper_bound(abfd) \
- BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
+ BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
#define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
- BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
+ BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
extern bfd_byte *bfd_get_relocated_section_contents
- PARAMS ((bfd *, struct bfd_link_info *,
- struct bfd_link_order *, bfd_byte *,
- boolean, asymbol **));
+ PARAMS ((bfd *, struct bfd_link_info *,
+ struct bfd_link_order *, bfd_byte *,
+ boolean, asymbol **));
-symindex
+symindex
bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym));
-boolean
+boolean
bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head));
bfd *
CONST char *
bfd_core_file_failing_command PARAMS ((bfd *abfd));
-int
+int
bfd_core_file_failing_signal PARAMS ((bfd *abfd));
-boolean
+boolean
core_file_matches_executable_p
PARAMS ((bfd *core_bfd, bfd *exec_bfd));
bfd_target_aout_flavour,
bfd_target_coff_flavour,
bfd_target_ecoff_flavour,
+ bfd_target_xcoff_flavour,
bfd_target_elf_flavour,
bfd_target_ieee_flavour,
bfd_target_nlm_flavour,
bfd_target_os9k_flavour,
bfd_target_versados_flavour,
bfd_target_msdos_flavour,
+ bfd_target_ovax_flavour,
bfd_target_evax_flavour
};
enum bfd_endian { BFD_ENDIAN_BIG, BFD_ENDIAN_LITTLE, BFD_ENDIAN_UNKNOWN };
- /* Forward declaration. */
+/* Forward declaration. */
typedef struct bfd_link_info _bfd_link_info;
typedef struct bfd_target
enum bfd_flavour flavour;
enum bfd_endian byteorder;
enum bfd_endian header_byteorder;
- flagword object_flags;
+ flagword object_flags;
flagword section_flags;
char symbol_leading_char;
- char ar_pad_char;
+ char ar_pad_char;
unsigned short ar_max_namelen;
bfd_vma (*bfd_getx64) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *));
boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
- /* Generic entry points. */
+ /* Generic entry points. */
#define BFD_JUMP_TABLE_GENERIC(NAME)\
CAT(NAME,_close_and_cleanup),\
CAT(NAME,_bfd_free_cached_info),\
CAT(NAME,_get_section_contents),\
CAT(NAME,_get_section_contents_in_window)
- /* Called when the BFD is being closed to do any necessary cleanup. */
+ /* Called when the BFD is being closed to do any necessary cleanup. */
boolean (*_close_and_cleanup) PARAMS ((bfd *));
- /* Ask the BFD to free all cached information. */
+ /* Ask the BFD to free all cached information. */
boolean (*_bfd_free_cached_info) PARAMS ((bfd *));
- /* Called when a new section is created. */
+ /* Called when a new section is created. */
boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
- /* Read the contents of a section. */
- boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
+ /* Read the contents of a section. */
+ boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
file_ptr, bfd_size_type));
boolean (*_bfd_get_section_contents_in_window)
PARAMS ((bfd *, sec_ptr, bfd_window *,
file_ptr, bfd_size_type));
- /* Entry points to copy private data. */
+ /* Entry points to copy private data. */
#define BFD_JUMP_TABLE_COPY(NAME)\
CAT(NAME,_bfd_copy_private_bfd_data),\
CAT(NAME,_bfd_merge_private_bfd_data),\
CAT(NAME,_bfd_copy_private_symbol_data),\
CAT(NAME,_bfd_set_private_flags),\
CAT(NAME,_bfd_print_private_bfd_data)\
- /* Called to copy BFD general private data from one object file
+ /* Called to copy BFD general private data from one object file
to another. */
- boolean (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
- /* Called to merge BFD general private data from one object file
+ boolean (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
+ /* Called to merge BFD general private data from one object file
to a common output file when linking. */
- boolean (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *));
- /* Called to copy BFD private section data from one object file
+ boolean (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *));
+ /* Called to copy BFD private section data from one object file
to another. */
boolean (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr,
bfd *, sec_ptr));
- /* Called to copy BFD private symbol data from one symbol
+ /* Called to copy BFD private symbol data from one symbol
to another. */
boolean (*_bfd_copy_private_symbol_data) PARAMS ((bfd *, asymbol *,
- bfd *, asymbol *));
- /* Called to set private backend flags */
- boolean (*_bfd_set_private_flags) PARAMS ((bfd *, flagword));
+ bfd *, asymbol *));
+ /* Called to set private backend flags */
+ boolean (*_bfd_set_private_flags) PARAMS ((bfd *, flagword));
- /* Called to print private BFD data */
+ /* Called to print private BFD data */
boolean (*_bfd_print_private_bfd_data) PARAMS ((bfd *, PTR));
- /* Core file entry points. */
+ /* Core file entry points. */
#define BFD_JUMP_TABLE_CORE(NAME)\
CAT(NAME,_core_file_failing_command),\
CAT(NAME,_core_file_failing_signal),\
int (*_core_file_failing_signal) PARAMS ((bfd *));
boolean (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *));
- /* Archive entry points. */
+ /* Archive entry points. */
#define BFD_JUMP_TABLE_ARCHIVE(NAME)\
CAT(NAME,_slurp_armap),\
CAT(NAME,_slurp_extended_name_table),\
boolean (*_bfd_construct_extended_name_table)
PARAMS ((bfd *, char **, bfd_size_type *, const char **));
void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
- boolean (*write_armap) PARAMS ((bfd *arch,
+ boolean (*write_armap) PARAMS ((bfd *arch,
unsigned int elength,
struct orl *map,
- unsigned int orl_count,
+ unsigned int orl_count,
int stridx));
PTR (*_bfd_read_ar_hdr_fn) PARAMS ((bfd *));
bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
boolean (*_bfd_update_armap_timestamp) PARAMS ((bfd *));
- /* Entry points used for symbols. */
+ /* Entry points used for symbols. */
#define BFD_JUMP_TABLE_SYMBOLS(NAME)\
CAT(NAME,_get_symtab_upper_bound),\
CAT(NAME,_get_symtab),\
struct symbol_cache_entry *,
symbol_info *));
#define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
- boolean (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *));
+ boolean (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *));
alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
boolean (*_bfd_find_nearest_line) PARAMS ((bfd *abfd,
struct sec *section, struct symbol_cache_entry **symbols,
bfd_vma offset, CONST char **file, CONST char **func,
unsigned int *line));
- /* Back-door to allow format-aware applications to create debug symbols
+ /* Back-door to allow format-aware applications to create debug symbols
while using BFD for everything else. Currently used by the assembler
when creating COFF files. */
asymbol * (*_bfd_make_debug_symbol) PARAMS ((
asymbol *(*_minisymbol_to_symbol) PARAMS ((bfd *, boolean, const PTR,
asymbol *));
- /* Routines for relocs. */
+ /* Routines for relocs. */
#define BFD_JUMP_TABLE_RELOCS(NAME)\
CAT(NAME,_get_reloc_upper_bound),\
CAT(NAME,_canonicalize_reloc),\
long (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
long (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
struct symbol_cache_entry **));
- /* See documentation on reloc types. */
+ /* See documentation on reloc types. */
reloc_howto_type *
(*reloc_type_lookup) PARAMS ((bfd *abfd,
bfd_reloc_code_real_type code));
- /* Routines used when writing an object file. */
+ /* Routines used when writing an object file. */
#define BFD_JUMP_TABLE_WRITE(NAME)\
CAT(NAME,_set_arch_mach),\
CAT(NAME,_set_section_contents)
boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
file_ptr, bfd_size_type));
- /* Routines used by the linker. */
+ /* Routines used by the linker. */
#define BFD_JUMP_TABLE_LINK(NAME)\
CAT(NAME,_sizeof_headers),\
CAT(NAME,_bfd_get_relocated_section_contents),\
CAT(NAME,_bfd_link_hash_table_create),\
CAT(NAME,_bfd_link_add_symbols),\
CAT(NAME,_bfd_final_link),\
-CAT(NAME,_bfd_link_split_section)
+CAT(NAME,_bfd_link_split_section),\
+CAT(NAME,_bfd_gc_sections)
int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
struct bfd_link_info *, struct bfd_link_order *,
boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
struct bfd_link_info *, boolean *again));
- /* Create a hash table for the linker. Different backends store
+ /* Create a hash table for the linker. Different backends store
different information in this table. */
struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *));
- /* Add symbols from this object file into the hash table. */
+ /* Add symbols from this object file into the hash table. */
boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
- /* Do a link based on the link_order structures attached to each
+ /* Do a link based on the link_order structures attached to each
section of the BFD. */
boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
- /* Should this section be split up into smaller pieces during linking. */
+ /* Should this section be split up into smaller pieces during linking. */
boolean (*_bfd_link_split_section) PARAMS ((bfd *, struct sec *));
+ /* Remove sections that are not referenced from the output. */
+ boolean (*_bfd_gc_sections) PARAMS ((bfd *, struct bfd_link_info *));
+
/* Routines to handle dynamic symbols and relocs. */
#define BFD_JUMP_TABLE_DYNAMIC(NAME)\
CAT(NAME,_get_dynamic_symtab_upper_bound),\
CAT(NAME,_canonicalize_dynamic_symtab),\
CAT(NAME,_get_dynamic_reloc_upper_bound),\
CAT(NAME,_canonicalize_dynamic_reloc)
- /* Get the amount of memory required to hold the dynamic symbols. */
+ /* Get the amount of memory required to hold the dynamic symbols. */
long (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *));
- /* Read in the dynamic symbols. */
+ /* Read in the dynamic symbols. */
long (*_bfd_canonicalize_dynamic_symtab)
PARAMS ((bfd *, struct symbol_cache_entry **));
- /* Get the amount of memory required to hold the dynamic relocs. */
+ /* Get the amount of memory required to hold the dynamic relocs. */
long (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *));
- /* Read in the dynamic relocs. */
+ /* Read in the dynamic relocs. */
long (*_bfd_canonicalize_dynamic_reloc)
PARAMS ((bfd *, arelent **, struct symbol_cache_entry **));
+ /* Opposite endian version of this target. */
+ const struct bfd_target * alternative_target;
+
PTR backend_data;
+
} bfd_target;
-boolean
+boolean
bfd_set_default_target PARAMS ((const char *name));
const bfd_target *
const char **
bfd_target_list PARAMS ((void));
-boolean
+const bfd_target *
+bfd_search_for_target PARAMS ((int (* search_func)(const bfd_target *, void *), void *));
+
+boolean
bfd_check_format PARAMS ((bfd *abfd, bfd_format format));
-boolean
+boolean
bfd_check_format_matches PARAMS ((bfd *abfd, bfd_format format, char ***matching));
-boolean
+boolean
bfd_set_format PARAMS ((bfd *abfd, bfd_format format));
CONST char *