/* Main header file for the bfd library -- portable access to object files.
- Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
Contributed by Cygnus Support.
** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them;
#include "ansidecl.h"
#include "obstack.h"
-#define BFD_VERSION "2.2"
-
+/* These two lines get substitutions done by commands in Makefile.in. */
+#define BFD_VERSION "@VERSION@"
#define BFD_ARCH_SIZE @WORDSIZE@
#if BFD_ARCH_SIZE >= 64
force me to change it. */
/* typedef enum boolean {false, true} boolean; */
/* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h> -fnf */
+/* It gets worse if the host also defines a true/false enum... -sts */
+#ifndef TRUE_FALSE_ALREADY_DEFINED
typedef enum bfd_boolean {false, true} boolean;
+#define BFD_TRUE_FALSE
+#else
+typedef enum bfd_boolean {bfd_false, bfd_true} boolean;
+#endif
/* A pointer to a position in a file. */
/* FIXME: This should be using off_t from <sys/types.h>.
/* typedef off_t file_ptr; */
typedef long int file_ptr;
-/* Support for different sizes of target format ints and addresses. If the
- host implements 64-bit values, it defines HOST_64_BIT to be the appropriate
- type. Otherwise, this code will fall back on gcc's "long long" type if gcc
- is being used. HOST_64_BIT must be defined in such a way as to be a valid
- type name by itself or with "unsigned" prefixed. It should be a signed
- type by itself.
+/* Support for different sizes of target format ints and addresses.
+ If the host implements 64-bit values, it defines BFD_HOST_64_BIT to
+ be the appropriate type. Otherwise, this code will fall back on
+ gcc's "long long" type if gcc is being used. BFD_HOST_64_BIT must
+ be defined in such a way as to be a valid type name by itself or
+ with "unsigned" prefixed. It should be a signed type by itself.
- If neither is the case, then compilation will fail if 64-bit targets are
- requested. If you don't request any 64-bit targets, you should be safe. */
+ If neither is the case, then compilation will fail if 64-bit
+ targets are requested. If you don't request any 64-bit targets,
+ you should be safe. */
#ifdef BFD64
-#if defined (__GNUC__) && !defined (HOST_64_BIT)
-#define HOST_64_BIT long long
-typedef HOST_64_BIT int64_type;
-typedef unsigned HOST_64_BIT uint64_type;
+#if defined (__GNUC__) && !defined (BFD_HOST_64_BIT)
+#define BFD_HOST_64_BIT long long
+typedef BFD_HOST_64_BIT int64_type;
+typedef unsigned BFD_HOST_64_BIT uint64_type;
#endif
#if !defined (uint64_type) && defined (__GNUC__)
#define uint64_type unsigned long long
#define int64_type long long
-#define uint64_typeLOW(x) (unsigned long)(((x) & 0xffffffff))
-#define uint64_typeHIGH(x) (unsigned long)(((x) >> 32) & 0xffffffff)
+#endif
+#ifndef uint64_typeLOW
+#define uint64_typeLOW(x) ((unsigned long)(((x) & 0xffffffff)))
+#define uint64_typeHIGH(x) ((unsigned long)(((x) >> 32) & 0xffffffff))
#endif
-typedef unsigned HOST_64_BIT bfd_vma;
-typedef HOST_64_BIT bfd_signed_vma;
-typedef unsigned HOST_64_BIT bfd_size_type;
-typedef unsigned HOST_64_BIT symvalue;
+typedef unsigned BFD_HOST_64_BIT bfd_vma;
+typedef BFD_HOST_64_BIT bfd_signed_vma;
+typedef unsigned BFD_HOST_64_BIT bfd_size_type;
+typedef unsigned BFD_HOST_64_BIT symvalue;
+#ifndef fprintf_vma
#define fprintf_vma(s,x) \
- fprintf(s,"%08x%08x", uint64_typeHIGH(x), uint64_typeLOW(x))
+ fprintf(s,"%08lx%08lx", uint64_typeHIGH(x), uint64_typeLOW(x))
#define sprintf_vma(s,x) \
- sprintf(s,"%08x%08x", uint64_typeHIGH(x), uint64_typeLOW(x))
+ sprintf(s,"%08lx%08lx", uint64_typeHIGH(x), uint64_typeLOW(x))
+#endif
#else /* not BFD64 */
/* Represent a target address. Also used as a generic unsigned type
#define D_PAGED 0x100
/* BFD is relaxable (this means that bfd_relax_section may be able to
- do something). */
+ do something) (sometimes bfd_relax_section can do something even if
+ this is not set). */
#define BFD_IS_RELAXABLE 0x200
+
+/* This may be set before writing out a BFD to request using a
+ traditional format. For example, this is used to request that when
+ writing out an a.out object the symbols not be hashed to eliminate
+ duplicates. */
+#define BFD_TRADITIONAL_FORMAT 0x400
\f
/* symbols and relocation */
+/* A count of carsyms (canonical archive symbols). */
typedef unsigned long symindex;
#define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
-typedef enum bfd_symclass {
- bfd_symclass_unknown = 0,
- bfd_symclass_fcommon, /* fortran common symbols */
- bfd_symclass_global, /* global symbol, what a surprise */
- bfd_symclass_debugger, /* some debugger symbol */
- bfd_symclass_undefined /* none known */
- } symclass;
-
-
-/* general purpose part of a symbol;
- target specific parts will be found in libcoff.h, liba.out.h etc */
-
+/* General purpose part of a symbol X;
+ target specific parts are in libcoff.h, libaout.h, etc. */
#define bfd_get_section(x) ((x)->section)
#define bfd_get_output_section(x) ((x)->section->output_section)
#define bfd_asymbol_bfd(x) ((x)->the_bfd)
#define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
+/* A canonical archive symbol. */
/* This is a type pun with struct ranlib on purpose! */
typedef struct carsym {
char *name;
} carsym; /* to make these you call a carsymogen */
-/* Used in generating armaps. Perhaps just a forward definition would do? */
+/* Used in generating armaps (archive tables of contents).
+ Perhaps just a forward definition would do? */
struct orl { /* output ranlib */
char **name; /* symbol name */
file_ptr pos; /* bfd* or file position */
typedef struct lineno_cache_entry {
unsigned int line_number; /* Linenumber from start of function*/
union {
- struct symbol_cache_entry *sym; /* Function name */
+ struct symbol_cache_entry *sym; /* Function name */
unsigned long offset; /* Offset into section */
} u;
} alent;
\f
/* object and core file sections */
-
#define align_power(addr, align) \
( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
typedef struct stat stat_type;
\f
-/** Error handling */
-
-typedef enum bfd_error {
- no_error = 0, system_call_error, invalid_target,
- wrong_format, invalid_operation, no_memory,
- no_symbols, no_relocation_info,
- no_more_archived_files, malformed_archive,
- symbol_not_found, file_not_recognized,
- file_ambiguously_recognized, no_contents,
- bfd_error_nonrepresentable_section,
- no_debug_section, bad_value,
-
- /* An input file is shorter than expected. */
- file_truncated,
-
- invalid_error_code} bfd_ec;
-
-extern bfd_ec bfd_error;
-struct reloc_cache_entry;
-struct bfd_seclet;
-
-
-typedef struct bfd_error_vector {
- void (* nonrepresentable_section ) PARAMS ((CONST bfd *CONST abfd,
- CONST char *CONST name));
- void (* undefined_symbol) PARAMS ((CONST struct reloc_cache_entry *rel,
- CONST struct bfd_seclet *sec));
- void (* reloc_value_truncated) PARAMS ((CONST struct
- reloc_cache_entry *rel,
- struct bfd_seclet *sec));
-
- void (* reloc_dangerous) PARAMS ((CONST struct reloc_cache_entry *rel,
- CONST struct bfd_seclet *sec));
-
-} bfd_error_vector_type;
-
-CONST char *bfd_errmsg PARAMS ((bfd_ec error_tag));
-void bfd_perror PARAMS ((CONST char *message));
-\f
-
typedef enum bfd_print_symbol
{
bfd_print_symbol_name,
bfd_print_symbol_all
} bfd_print_symbol_type;
-\f
/* Information about a symbol that nm needs. */
typedef struct _symbol_info
{
symvalue value;
- char type; /* */
+ char type;
CONST char *name; /* Symbol name. */
char stab_other; /* Unused. */
short stab_desc; /* Info for N_TYPE. */
CONST char *stab_name;
} symbol_info;
\f
-/* The code that implements targets can initialize a jump table with this
- macro. It must name all its routines the same way (a prefix plus
- the standard routine suffix), or it must #define the routines that
- are not so named, before calling JUMP_TABLE in the initializer. */
+/* Hash table routines. There is no way to free up a hash table. */
+/* An element in the hash table. Most uses will actually use a larger
+ structure, and an instance of this will be the first field. */
+
+struct bfd_hash_entry
+{
+ /* Next entry for this hash code. */
+ struct bfd_hash_entry *next;
+ /* String being hashed. */
+ const char *string;
+ /* Hash code. This is the full hash code, not the index into the
+ table. */
+ unsigned long hash;
+};
+
+/* A hash table. */
+
+struct bfd_hash_table
+{
+ /* The hash array. */
+ struct bfd_hash_entry **table;
+ /* The number of slots in the hash table. */
+ unsigned int size;
+ /* A function used to create new elements in the hash table. The
+ first entry is itself a pointer to an element. When this
+ function is first invoked, this pointer will be NULL. However,
+ having the pointer permits a hierarchy of method functions to be
+ built each of which calls the function in the superclass. Thus
+ each function should be written to allocate a new block of memory
+ only if the argument is NULL. */
+ struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *,
+ struct bfd_hash_table *,
+ const char *));
+ /* An obstack for this hash table. */
+ struct obstack memory;
+};
+
+/* Initialize a hash table. */
+extern boolean bfd_hash_table_init
+ PARAMS ((struct bfd_hash_table *,
+ struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
+ struct bfd_hash_table *,
+ const char *)));
+
+/* Initialize a hash table specifying a size. */
+extern boolean bfd_hash_table_init_n
+ PARAMS ((struct bfd_hash_table *,
+ struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
+ struct bfd_hash_table *,
+ const char *),
+ unsigned int size));
+
+/* Free up a hash table. */
+extern void bfd_hash_table_free PARAMS ((struct bfd_hash_table *));
+
+/* Look up a string in a hash table. If CREATE is true, a new entry
+ will be created for this string if one does not already exist. The
+ COPY argument must be true if this routine should copy the string
+ into newly allocated memory when adding an entry. */
+extern struct bfd_hash_entry *bfd_hash_lookup
+ PARAMS ((struct bfd_hash_table *, const char *, boolean create,
+ boolean copy));
+
+/* Base method for creating a hash table entry. */
+extern struct bfd_hash_entry *bfd_hash_newfunc
+ PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *,
+ const char *));
+
+/* Grab some space for a hash table entry. */
+extern PTR bfd_hash_allocate PARAMS ((struct bfd_hash_table *,
+ unsigned int));
+
+/* Traverse a hash table in a random order, calling a function on each
+ element. If the function returns false, the traversal stops. The
+ INFO argument is passed to the function. */
+extern void bfd_hash_traverse PARAMS ((struct bfd_hash_table *,
+ boolean (*) (struct bfd_hash_entry *,
+ PTR),
+ PTR info));
+\f
/* Semi-portable string concatenation in cpp.
The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
The problem is, "32_" is not a valid preprocessing token, and we don't
#define CAT3(a,b,c) a##b##c
#define CAT4(a,b,c,d) a##b##c##d
#else
-#ifdef __STDC__
+#if defined(__STDC__) || defined(ALMOST_STDC)
#define CAT(a,b) a##b
#define CAT3(a,b,c) a##b##c
#define XCAT2(a,b) CAT(a,b)
#endif
#endif
-#define JUMP_TABLE(NAME)\
-CAT(NAME,_core_file_failing_command),\
-CAT(NAME,_core_file_failing_signal),\
-CAT(NAME,_core_file_matches_executable_p),\
-CAT(NAME,_slurp_armap),\
-CAT(NAME,_slurp_extended_name_table),\
-CAT(NAME,_truncate_arname),\
-CAT(NAME,_write_armap),\
-CAT(NAME,_close_and_cleanup),\
-CAT(NAME,_set_section_contents),\
-CAT(NAME,_get_section_contents),\
-CAT(NAME,_new_section_hook),\
-CAT(NAME,_get_symtab_upper_bound),\
-CAT(NAME,_get_symtab),\
-CAT(NAME,_get_reloc_upper_bound),\
-CAT(NAME,_canonicalize_reloc),\
-CAT(NAME,_make_empty_symbol),\
-CAT(NAME,_print_symbol),\
-CAT(NAME,_get_symbol_info),\
-CAT(NAME,_get_lineno),\
-CAT(NAME,_set_arch_mach),\
-CAT(NAME,_openr_next_archived_file),\
-CAT(NAME,_find_nearest_line),\
-CAT(NAME,_generic_stat_arch_elt),\
-CAT(NAME,_sizeof_headers),\
-CAT(NAME,_bfd_debug_info_start),\
-CAT(NAME,_bfd_debug_info_end),\
-CAT(NAME,_bfd_debug_info_accumulate),\
-CAT(NAME,_bfd_get_relocated_section_contents),\
-CAT(NAME,_bfd_relax_section),\
-CAT(NAME,_bfd_seclet_link),\
-CAT(NAME,_bfd_reloc_type_lookup),\
-CAT(NAME,_bfd_make_debug_symbol)
-
#define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
-
\f
/* User program access to BFD facilities */
+/* Direct I/O routines, for programs which know more about the object
+ file than BFD does. Use higher level routines if possible. */
+
+extern bfd_size_type bfd_read
+ PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
+extern bfd_size_type bfd_write
+ PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
+extern int bfd_seek PARAMS ((bfd *abfd, file_ptr fp, int direction));
+extern long bfd_tell PARAMS ((bfd *abfd));
+extern int bfd_flush PARAMS ((bfd *abfd));
+extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
+
/* Cast from const char * to char * so that caller can assign to
a char * without a warning. */
#define bfd_get_filename(abfd) ((char *) (abfd)->filename)
/* Byte swapping routines. */
-bfd_vma bfd_getb64 PARAMS ((unsigned char *));
-bfd_vma bfd_getl64 PARAMS ((unsigned char *));
-bfd_signed_vma bfd_getb_signed_64 PARAMS ((unsigned char *));
-bfd_signed_vma bfd_getl_signed_64 PARAMS ((unsigned char *));
-bfd_vma bfd_getb32 PARAMS ((unsigned char *));
-bfd_vma bfd_getl32 PARAMS ((unsigned char *));
-bfd_signed_vma bfd_getb_signed_32 PARAMS ((unsigned char *));
-bfd_signed_vma bfd_getl_signed_32 PARAMS ((unsigned char *));
-bfd_vma bfd_getb16 PARAMS ((unsigned char *));
-bfd_vma bfd_getl16 PARAMS ((unsigned char *));
-bfd_signed_vma bfd_getb_signed_16 PARAMS ((unsigned char *));
-bfd_signed_vma bfd_getl_signed_16 PARAMS ((unsigned char *));
+bfd_vma bfd_getb64 PARAMS ((const unsigned char *));
+bfd_vma bfd_getl64 PARAMS ((const unsigned char *));
+bfd_signed_vma bfd_getb_signed_64 PARAMS ((const unsigned char *));
+bfd_signed_vma bfd_getl_signed_64 PARAMS ((const unsigned char *));
+bfd_vma bfd_getb32 PARAMS ((const unsigned char *));
+bfd_vma bfd_getl32 PARAMS ((const unsigned char *));
+bfd_signed_vma bfd_getb_signed_32 PARAMS ((const unsigned char *));
+bfd_signed_vma bfd_getl_signed_32 PARAMS ((const unsigned char *));
+bfd_vma bfd_getb16 PARAMS ((const unsigned char *));
+bfd_vma bfd_getl16 PARAMS ((const unsigned char *));
+bfd_signed_vma bfd_getb_signed_16 PARAMS ((const unsigned char *));
+bfd_signed_vma bfd_getl_signed_16 PARAMS ((const unsigned char *));
void bfd_putb64 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl64 PARAMS ((bfd_vma, unsigned char *));
void bfd_putb32 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl32 PARAMS ((bfd_vma, unsigned char *));
void bfd_putb16 PARAMS ((bfd_vma, unsigned char *));
void bfd_putl16 PARAMS ((bfd_vma, unsigned char *));
+\f
+/* Externally visible ECOFF routines. */
+
+#if defined(__STDC__) || defined(ALMOST_STDC)
+struct ecoff_debug_info;
+struct ecoff_debug_swap;
+struct ecoff_extr;
+struct symbol_cache_entry;
+struct bfd_link_info;
+#endif
+extern bfd_vma bfd_ecoff_get_gp_value PARAMS ((bfd * abfd));
+extern boolean bfd_ecoff_set_gp_value PARAMS ((bfd *abfd, bfd_vma gp_value));
+extern boolean bfd_ecoff_set_regmasks
+ PARAMS ((bfd *abfd, unsigned long gprmask, unsigned long fprmask,
+ unsigned long *cprmask));
+extern PTR bfd_ecoff_debug_init
+ PARAMS ((bfd *output_bfd, struct ecoff_debug_info *output_debug,
+ const struct ecoff_debug_swap *output_swap,
+ struct bfd_link_info *));
+extern void bfd_ecoff_debug_free
+ PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
+ const struct ecoff_debug_swap *output_swap,
+ struct bfd_link_info *));
+extern boolean bfd_ecoff_debug_accumulate
+ PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
+ const struct ecoff_debug_swap *output_swap,
+ bfd *input_bfd, struct ecoff_debug_info *input_debug,
+ const struct ecoff_debug_swap *input_swap,
+ struct bfd_link_info *));
+extern boolean bfd_ecoff_debug_accumulate_other
+ PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
+ const struct ecoff_debug_swap *output_swap, bfd *input_bfd,
+ struct bfd_link_info *));
+extern boolean bfd_ecoff_debug_externals
+ PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+ const struct ecoff_debug_swap *swap,
+ boolean relocateable,
+ boolean (*get_extr) (struct symbol_cache_entry *,
+ struct ecoff_extr *),
+ void (*set_index) (struct symbol_cache_entry *,
+ bfd_size_type)));
+extern boolean bfd_ecoff_debug_one_external
+ PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+ const struct ecoff_debug_swap *swap,
+ const char *name, struct ecoff_extr *esym));
+extern bfd_size_type bfd_ecoff_debug_size
+ PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+ const struct ecoff_debug_swap *swap));
+extern boolean bfd_ecoff_write_debug
+ PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
+ const struct ecoff_debug_swap *swap, file_ptr where));
+extern boolean bfd_ecoff_write_accumulated_debug
+ PARAMS ((PTR handle, bfd *abfd, struct ecoff_debug_info *debug,
+ const struct ecoff_debug_swap *swap,
+ struct bfd_link_info *info, file_ptr where));
+extern boolean bfd_mips_ecoff_create_embedded_relocs
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
+ char **));
+
+/* Externally visible ELF routines. */
+
+extern boolean bfd_elf32_record_link_assignment
+ PARAMS ((bfd *, struct bfd_link_info *, const char *));
+extern boolean bfd_elf64_record_link_assignment
+ PARAMS ((bfd *, struct bfd_link_info *, const char *));
+extern boolean bfd_elf32_size_dynamic_sections
+ PARAMS ((bfd *, const char *, const char *, boolean,
+ struct bfd_link_info *, struct sec **));
+extern boolean bfd_elf64_size_dynamic_sections
+ PARAMS ((bfd *, const char *, const char *, boolean,
+ struct bfd_link_info *, struct sec **));
+extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
+
+/* SunOS shared library support routines for the linker. */
+
+extern boolean bfd_sunos_record_link_assignment
+ PARAMS ((bfd *, struct bfd_link_info *, const char *));
+extern boolean bfd_sunos_size_dynamic_sections
+ PARAMS ((bfd *, struct bfd_link_info *, struct sec **, struct sec **,
+ struct sec **));
+
+/* Linux shared library support routines for the linker. */
+
+extern boolean bfd_linux_size_dynamic_sections
+ PARAMS ((bfd *, struct bfd_link_info *));
/* And more from the source. */
void
/* Byte swapping macros for user section data. */
#define bfd_put_8(abfd, val, ptr) \
- (*((unsigned char *)(ptr)) = (unsigned char)val)
+ (*((unsigned char *)(ptr)) = (unsigned char)(val))
#define bfd_put_signed_8 \
bfd_put_8
#define bfd_get_8(abfd, ptr) \
#define bfd_h_get_signed_64(abfd, ptr) \
BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
-typedef struct sec
+typedef struct sec
{
/* The name of the section; the name isn't a copy, the pointer is
the same as that passed to bfd_make_section. */
/* Which section is it; 0..nth. */
- int index;
+ int index;
/* The next section in the list belonging to the BFD, or NULL. */
/* The field flags contains attributes of the section. Some
flags are read in from the object file, and some are
- synthesized from other information. */
+ synthesized from other information. */
flagword flags;
This is clear for a section containing debug information
only. */
#define SEC_ALLOC 0x001
-
+
/* Tells the OS to load the section from the file when loading.
This is clear for a .bss section. */
#define SEC_LOAD 0x002
#define SEC_HAS_CONTENTS 0x200
/* An instruction to the linker to not output the section
- even if it has information which would normally be written. */
+ even if it has information which would normally be written. */
#define SEC_NEVER_LOAD 0x400
- /* The section is a shared library section. The linker must leave
- these completely alone, as the vma and size are used when
- the executable is loaded. */
-#define SEC_SHARED_LIBRARY 0x800
+ /* The section is a COFF shared library section. This flag is
+ only for the linker. If this type of section appears in
+ the input file, the linker must copy it to the output file
+ without changing the vma or size. FIXME: Although this
+ was originally intended to be general, it really is COFF
+ specific (and the flag was renamed to indicate this). It
+ might be cleaner to have some more general mechanism to
+ allow the back end to control what the linker does with
+ sections. */
+#define SEC_COFF_SHARED_LIBRARY 0x800
/* The section is a common section (symbols may be defined
multiple times, the value of a symbol is the amount of
space it requires, and the largest symbol value is the one
used). Most targets have exactly one of these (which we
- translate to bfd_com_section), but ECOFF has two. */
+ translate to bfd_com_section_ptr), but ECOFF has two. */
#define SEC_IS_COMMON 0x8000
/* The section contains only debugging information. For
discarded. */
#define SEC_DEBUGGING 0x10000
+ /* The contents of this section are held in memory pointed to
+ by the contents field. This is checked by
+ bfd_get_section_contents, and the data is retrieved from
+ memory if appropriate. */
+#define SEC_IN_MEMORY 0x20000
+
/* End of section flags. */
/* The virtual memory address of the section - where it will be
contains a value even if the section has no contents (e.g., the
size of <<.bss>>). This will be filled in after relocation */
- bfd_size_type _cooked_size;
+ bfd_size_type _cooked_size;
/* The original size on disk of the section, in bytes. Normally this
value is the same as the size, but if some relaxing has
been done, then this value will be bigger. */
- bfd_size_type _raw_size;
+ bfd_size_type _raw_size;
/* If this section is going to be output, then this value is the
offset into the output section of the first byte in the input
/* File position of section data */
- file_ptr filepos;
-
+ file_ptr filepos;
+
/* File position of relocation info */
file_ptr rel_filepos;
PTR userdata;
- struct lang_output_section *otheruserdata;
+ /* If the SEC_IN_MEMORY flag is set, this points to the actual
+ contents. */
+ unsigned char *contents;
/* Attached line number information */
alent *lineno;
-
+
/* Number of line number records */
unsigned int lineno_count;
boolean reloc_done;
/* A symbol which points at this section only */
- struct symbol_cache_entry *symbol;
+ struct symbol_cache_entry *symbol;
struct symbol_cache_entry **symbol_ptr_ptr;
- struct bfd_seclet *seclets_head;
- struct bfd_seclet *seclets_tail;
+ struct bfd_link_order *link_order_head;
+ struct bfd_link_order *link_order_tail;
} asection ;
-
/* These sections are global, and are managed by BFD. The application
and target back end are not permitted to change the values in
- these sections. */
+ these sections. New code should use the section_ptr macros rather
+ than referring directly to the const sections. The const sections
+ may eventually vanish. */
#define BFD_ABS_SECTION_NAME "*ABS*"
#define BFD_UND_SECTION_NAME "*UND*"
#define BFD_COM_SECTION_NAME "*COM*"
#define BFD_IND_SECTION_NAME "*IND*"
/* the absolute section */
-extern asection bfd_abs_section;
+extern const asection bfd_abs_section;
+#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
+#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
/* Pointer to the undefined section */
-extern asection bfd_und_section;
+extern const asection bfd_und_section;
+#define bfd_und_section_ptr ((asection *) &bfd_und_section)
+#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
/* Pointer to the common section */
-extern asection bfd_com_section;
+extern const asection bfd_com_section;
+#define bfd_com_section_ptr ((asection *) &bfd_com_section)
/* Pointer to the indirect section */
-extern asection bfd_ind_section;
-
-extern struct symbol_cache_entry *bfd_abs_symbol;
-extern struct symbol_cache_entry *bfd_com_symbol;
-extern struct symbol_cache_entry *bfd_und_symbol;
-extern struct symbol_cache_entry *bfd_ind_symbol;
+extern const asection bfd_ind_section;
+#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
+#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
+
+extern const struct symbol_cache_entry * const bfd_abs_symbol;
+extern const struct symbol_cache_entry * const bfd_com_symbol;
+extern const struct symbol_cache_entry * const bfd_und_symbol;
+extern const struct symbol_cache_entry * const bfd_ind_symbol;
#define bfd_get_section_size_before_reloc(section) \
(section->reloc_done ? (abort(),1): (section)->_raw_size)
#define bfd_get_section_size_after_reloc(section) \
boolean
bfd_set_section_contents
- PARAMS ((bfd *abfd,
+ PARAMS ((bfd *abfd,
asection *section,
PTR data,
file_ptr offset,
bfd_size_type count));
boolean
-bfd_get_section_contents
+bfd_get_section_contents
PARAMS ((bfd *abfd, asection *section, PTR location,
file_ptr offset, bfd_size_type count));
+boolean
+bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec));
+
+#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
+ BFD_SEND (ibfd, _bfd_copy_private_section_data, \
+ (ibfd, isection, obfd, osection))
enum bfd_architecture
{
bfd_arch_unknown, /* File arch not known */
#define bfd_mach_i960_mc 4
#define bfd_mach_i960_xa 5
#define bfd_mach_i960_ca 6
+ /* start-sanitize-i960xl */
+#define bfd_mach_i960_xl 7
+ /* end-sanitize-i960xl */
bfd_arch_a29k, /* AMD 29000 */
bfd_arch_sparc, /* SPARC */
bfd_arch_h8300, /* Hitachi H8/300 */
#define bfd_mach_h8300 1
#define bfd_mach_h8300h 2
+ bfd_arch_powerpc, /* PowerPC */
bfd_arch_rs6000, /* IBM RS/6000 */
bfd_arch_hppa, /* HP PA RISC */
bfd_arch_z8k, /* Zilog Z8000 */
bfd_arch_h8500, /* Hitachi H8/500 */
bfd_arch_sh, /* Hitachi SH */
bfd_arch_alpha, /* Dec Alpha */
+ bfd_arch_arm, /* Advanced Risc Machines ARM */
+ bfd_arch_ns32k, /* National Semiconductors ns32000 */
+ /* start-sanitize-rce */
+ bfd_arch_rce, /* Motorola RCE */
+ /* end-sanitize-rce */
+ /* start-sanitize-arc */
+ bfd_arch_arc, /* Argonaut RISC Core */
+ /* end-sanitize-arc */
bfd_arch_last
};
bfd_printable_arch_mach
PARAMS ((enum bfd_architecture arch, unsigned long machine));
-typedef enum bfd_reloc_status
+typedef enum bfd_reloc_status
{
/* No errors detected */
bfd_reloc_ok,
/* The relocation was performed, but may not be ok - presently
generated only when linking i960 coff files with i960 b.out
- symbols. */
+ symbols. If this type is returned, the error_message argument
+ to bfd_perform_relocation will be set. */
bfd_reloc_dangerous
}
bfd_reloc_status_type;
-typedef struct reloc_cache_entry
+typedef struct reloc_cache_entry
{
/* A pointer into the canonical table of pointers */
struct symbol_cache_entry **sym_ptr_ptr;
bfd_size_type address;
/* addend for relocation value */
- bfd_vma addend;
+ bfd_vma addend;
/* Pointer to how to perform the required relocation */
- CONST struct reloc_howto_struct *howto;
+ const struct reloc_howto_struct *howto;
} arelent;
enum complain_overflow
complain_overflow_unsigned
};
-typedef struct reloc_howto_struct
-{
+typedef unsigned char bfd_byte;
+typedef const struct reloc_howto_struct reloc_howto_type;
+
+struct reloc_howto_struct
+{
/* The type field has mainly a documetary use - the back end can
do what it wants with it, though normally the back end's
external idea of what a reloc number is stored
unsigned int rightshift;
/* The size of the item to be relocated. This is *not* a
- power-of-two measure.
- 0 : one byte
- 1 : two bytes
- 2 : four bytes
- 3 : nothing done (unless special_function is nonzero)
- 4 : eight bytes
- -2 : two bytes, result should be subtracted from the
- data instead of added
- There is currently no trivial way to extract a "number of
- bytes" from a howto pointer. */
+ power-of-two measure. To get the number of bytes operated
+ on by a type of relocation, use bfd_get_reloc_size. */
int size;
/* The number of bits in the item to be relocated. This is used
called rather than the normal function. This allows really
strange relocation methods to be accomodated (e.g., i960 callj
instructions). */
- bfd_reloc_status_type (*special_function)
+ bfd_reloc_status_type (*special_function)
PARAMS ((bfd *abfd,
arelent *reloc_entry,
struct symbol_cache_entry *symbol,
PTR data,
- asection *input_section,
- bfd *output_bfd));
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message));
/* The textual name of the relocation type. */
char *name;
into the instruction. In most cases src_mask == dst_mask,
except in the above special case, where dst_mask would be
0x000000ff, and src_mask would be 0x00000000. */
- bfd_vma dst_mask;
+ bfd_vma dst_mask;
/* When some formats create PC relative instructions, they leave
the value of the pc of the place being relocated in the offset
empty (e.g., m88k bcs); this flag signals the fact.*/
boolean pcrel_offset;
-} reloc_howto_type;
+};
#define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
{(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
relocation = symbol->value; \
} \
} \
-}
-typedef unsigned char bfd_byte;
+}
+int
+bfd_get_reloc_size PARAMS ((reloc_howto_type *));
typedef struct relent_chain {
arelent relent;
arelent *reloc_entry,
PTR data,
asection *input_section,
- bfd *output_bfd));
+ bfd *output_bfd,
+ char **error_message));
-typedef enum bfd_reloc_code_real
-{
- /* Basic absolute relocations */
+bfd_reloc_status_type
+
+bfd_install_relocation
+ PARAMS ((bfd *abfd,
+ arelent *reloc_entry,
+ PTR data, bfd_vma data_start,
+ asection *input_section,
+ char **error_message));
+
+enum bfd_reloc_code_real {
+ _dummy_first_bfd_reloc_code_real,
+
+
+/* Basic absolute relocations of N bits. */
BFD_RELOC_64,
BFD_RELOC_32,
- BFD_RELOC_16,
+ BFD_RELOC_26,
+ BFD_RELOC_16,
+ BFD_RELOC_14,
BFD_RELOC_8,
- /* PC-relative relocations */
+/* PC-relative relocations. Sometimes these are relative to the address
+of the relocation itself; sometimes they are relative to the start of
+the section containing the relocation. It depends on the specific target.
+
+The 24-bit relocation is used in some Intel 960 configurations. */
BFD_RELOC_64_PCREL,
BFD_RELOC_32_PCREL,
- BFD_RELOC_24_PCREL, /* used by i960 */
+ BFD_RELOC_24_PCREL,
BFD_RELOC_16_PCREL,
+ BFD_RELOC_12_PCREL,
BFD_RELOC_8_PCREL,
- /* Linkage-table relative */
+/* Linkage-table relative. */
BFD_RELOC_32_BASEREL,
BFD_RELOC_16_BASEREL,
BFD_RELOC_8_BASEREL,
- /* The type of reloc used to build a contructor table - at the moment
- probably a 32 bit wide abs address, but the cpu can choose. */
- BFD_RELOC_CTOR,
-
- /* 8 bits wide, but used to form an address like 0xffnn */
+/* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
BFD_RELOC_8_FFnn,
- /* 32-bit pc-relative, shifted right 2 bits (i.e., 30-bit
- word displacement, e.g. for SPARC) */
+/* These PC-relative relocations are stored as word displacements --
+i.e., byte displacements shifted right two bits. The 30-bit word
+displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
+SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
+signed 16-bit displacement is used on the MIPS, and the 23-bit
+displacement is used on the Alpha. */
BFD_RELOC_32_PCREL_S2,
+ BFD_RELOC_16_PCREL_S2,
+ BFD_RELOC_23_PCREL_S2,
- /* High 22 bits of 32-bit value, placed into lower 22 bits of
- target word; simple reloc. */
+/* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
+the target word. These are used on the SPARC. */
BFD_RELOC_HI22,
- /* Low 10 bits. */
BFD_RELOC_LO10,
- /* Reloc types used for i960/b.out. */
+/* For systems that allocate a Global Pointer register, these are
+displacements off that register. These relocation types are
+handled specially, because the value the register will have is
+decided relatively late. */
+ BFD_RELOC_GPREL16,
+ BFD_RELOC_GPREL32,
+
+/* Reloc types used for i960/b.out. */
BFD_RELOC_I960_CALLJ,
- /* now for the sparc/elf codes */
- BFD_RELOC_NONE, /* actually used */
+/* SPARC ELF relocations. There is probably some overlap with other
+relocation types already defined. */
+ BFD_RELOC_NONE,
BFD_RELOC_SPARC_WDISP22,
BFD_RELOC_SPARC22,
BFD_RELOC_SPARC13,
BFD_RELOC_SPARC_RELATIVE,
BFD_RELOC_SPARC_UA32,
- /* these are a.out specific? */
+/* I think these are specific to SPARC a.out (e.g., Sun 4). */
BFD_RELOC_SPARC_BASE13,
BFD_RELOC_SPARC_BASE22,
- /* start-sanitize-v9 */
+/* Some relocations we're using for SPARC V9 -- subject to change. */
+#define BFD_RELOC_SPARC_64 BFD_RELOC_64
BFD_RELOC_SPARC_10,
BFD_RELOC_SPARC_11,
-#define BFD_RELOC_SPARC_64 BFD_RELOC_64
BFD_RELOC_SPARC_OLO10,
BFD_RELOC_SPARC_HH22,
BFD_RELOC_SPARC_HM10,
BFD_RELOC_SPARC_WDISP19,
BFD_RELOC_SPARC_GLOB_JMP,
BFD_RELOC_SPARC_LO7,
- /* end-sanitize-v9 */
- /* Bits 27..2 of the relocation address shifted right 2 bits;
- simple reloc otherwise. */
+/* Alpha ECOFF relocations. Some of these treat the symbol or "addend"
+in some special way.
+For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
+writing; when reading, it will be the absolute section symbol. The
+addend is the displacement in bytes of the "lda" instruction from
+the "ldah" instruction (which is at the address of this reloc). */
+ BFD_RELOC_ALPHA_GPDISP_HI16,
+
+/* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
+with GPDISP_HI16 relocs. The addend is ignored when writing the
+relocations out, and is filled in with the file's GP value on
+reading, for convenience. */
+ BFD_RELOC_ALPHA_GPDISP_LO16,
+
+/* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
+the assembler turns it into a LDQ instruction to load the address of
+the symbol, and then fills in a register in the real instruction.
+
+The LITERAL reloc, at the LDQ instruction, refers to the .lita
+section symbol. The addend is ignored when writing, but is filled
+in with the file's GP value on reading, for convenience, as with the
+GPDISP_LO16 reloc.
+
+The LITUSE reloc, on the instruction using the loaded address, gives
+information to the linker that it might be able to use to optimize
+away some literal section references. The symbol is ignored (read
+as the absolute section symbol), and the "addend" indicates the type
+of instruction using the register:
+1 - "memory" fmt insn
+2 - byte-manipulation (byte offset reg)
+3 - jsr (target of branch)
+
+The GNU linker currently doesn't do any of this optimizing. */
+ BFD_RELOC_ALPHA_LITERAL,
+ BFD_RELOC_ALPHA_LITUSE,
+
+/* The HINT relocation indicates a value that should be filled into the
+"hint" field of a jmp/jsr/ret instruction, for possible branch-
+prediction logic which may be provided on some processors. */
+ BFD_RELOC_ALPHA_HINT,
+
+/* Bits 27..2 of the relocation address shifted right 2 bits;
+simple reloc otherwise. */
BFD_RELOC_MIPS_JMP,
- /* signed 16-bit pc-relative, shifted right 2 bits (e.g. for MIPS) */
- BFD_RELOC_16_PCREL_S2,
-
- /* High 16 bits of 32-bit value; simple reloc. */
+/* High 16 bits of 32-bit value; simple reloc. */
BFD_RELOC_HI16,
- /* High 16 bits of 32-bit value but the low 16 bits will be sign
- extended and added to form the final result. If the low 16
- bits form a negative number, we need to add one to the high value
- to compensate for the borrow when the low bits are added. */
+
+/* High 16 bits of 32-bit value but the low 16 bits will be sign
+extended and added to form the final result. If the low 16
+bits form a negative number, we need to add one to the high value
+to compensate for the borrow when the low bits are added. */
BFD_RELOC_HI16_S,
- /* Low 16 bits. */
+
+/* Low 16 bits. */
BFD_RELOC_LO16,
- /* 16 bit relocation relative to the global pointer. */
- BFD_RELOC_MIPS_GPREL,
+/* Like BFD_RELOC_HI16_S, but PC relative. */
+ BFD_RELOC_PCREL_HI16_S,
+
+/* Like BFD_RELOC_LO16, but PC relative. */
+ BFD_RELOC_PCREL_LO16,
- /* Relocation against a MIPS literal section. */
+/* Relocation relative to the global pointer. */
+#define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
+
+/* Relocation against a MIPS literal section. */
BFD_RELOC_MIPS_LITERAL,
- /* MIPS ELF relocations. */
+/* MIPS ELF relocations. */
BFD_RELOC_MIPS_GOT16,
BFD_RELOC_MIPS_CALL16,
- BFD_RELOC_MIPS_GPREL32,
-
- /* These are, so far, specific to HPPA processors. I'm not sure that some
- don't duplicate other reloc types, such as BFD_RELOC_32 and _32_PCREL.
- Also, many more were in the list I got that don't fit in well in the
- model BFD uses, so I've omitted them for now. If we do make this reloc
- type get used for code that really does implement the funky reloc types,
- they'll have to be added to this list. */
- BFD_RELOC_HPPA_32,
- BFD_RELOC_HPPA_11,
- BFD_RELOC_HPPA_14,
- BFD_RELOC_HPPA_17,
-
- BFD_RELOC_HPPA_L21,
- BFD_RELOC_HPPA_R11,
- BFD_RELOC_HPPA_R14,
- BFD_RELOC_HPPA_R17,
- BFD_RELOC_HPPA_LS21,
- BFD_RELOC_HPPA_RS11,
- BFD_RELOC_HPPA_RS14,
- BFD_RELOC_HPPA_RS17,
- BFD_RELOC_HPPA_LD21,
- BFD_RELOC_HPPA_RD11,
- BFD_RELOC_HPPA_RD14,
- BFD_RELOC_HPPA_RD17,
- BFD_RELOC_HPPA_LR21,
- BFD_RELOC_HPPA_RR14,
- BFD_RELOC_HPPA_RR17,
-
- BFD_RELOC_HPPA_GOTOFF_11,
- BFD_RELOC_HPPA_GOTOFF_14,
- BFD_RELOC_HPPA_GOTOFF_L21,
- BFD_RELOC_HPPA_GOTOFF_R11,
- BFD_RELOC_HPPA_GOTOFF_R14,
- BFD_RELOC_HPPA_GOTOFF_LS21,
- BFD_RELOC_HPPA_GOTOFF_RS11,
- BFD_RELOC_HPPA_GOTOFF_RS14,
- BFD_RELOC_HPPA_GOTOFF_LD21,
- BFD_RELOC_HPPA_GOTOFF_RD11,
- BFD_RELOC_HPPA_GOTOFF_RD14,
- BFD_RELOC_HPPA_GOTOFF_LR21,
- BFD_RELOC_HPPA_GOTOFF_RR14,
-
- BFD_RELOC_HPPA_DLT_32,
- BFD_RELOC_HPPA_DLT_11,
- BFD_RELOC_HPPA_DLT_14,
- BFD_RELOC_HPPA_DLT_L21,
- BFD_RELOC_HPPA_DLT_R11,
- BFD_RELOC_HPPA_DLT_R14,
-
- BFD_RELOC_HPPA_ABS_CALL_11,
- BFD_RELOC_HPPA_ABS_CALL_14,
- BFD_RELOC_HPPA_ABS_CALL_17,
- BFD_RELOC_HPPA_ABS_CALL_L21,
- BFD_RELOC_HPPA_ABS_CALL_R11,
- BFD_RELOC_HPPA_ABS_CALL_R14,
- BFD_RELOC_HPPA_ABS_CALL_R17,
- BFD_RELOC_HPPA_ABS_CALL_LS21,
- BFD_RELOC_HPPA_ABS_CALL_RS11,
- BFD_RELOC_HPPA_ABS_CALL_RS14,
- BFD_RELOC_HPPA_ABS_CALL_RS17,
- BFD_RELOC_HPPA_ABS_CALL_LD21,
- BFD_RELOC_HPPA_ABS_CALL_RD11,
- BFD_RELOC_HPPA_ABS_CALL_RD14,
- BFD_RELOC_HPPA_ABS_CALL_RD17,
- BFD_RELOC_HPPA_ABS_CALL_LR21,
- BFD_RELOC_HPPA_ABS_CALL_RR14,
- BFD_RELOC_HPPA_ABS_CALL_RR17,
-
- BFD_RELOC_HPPA_PCREL_CALL_11,
- BFD_RELOC_HPPA_PCREL_CALL_12,
- BFD_RELOC_HPPA_PCREL_CALL_14,
- BFD_RELOC_HPPA_PCREL_CALL_17,
- BFD_RELOC_HPPA_PCREL_CALL_L21,
- BFD_RELOC_HPPA_PCREL_CALL_R11,
- BFD_RELOC_HPPA_PCREL_CALL_R14,
- BFD_RELOC_HPPA_PCREL_CALL_R17,
- BFD_RELOC_HPPA_PCREL_CALL_LS21,
- BFD_RELOC_HPPA_PCREL_CALL_RS11,
- BFD_RELOC_HPPA_PCREL_CALL_RS14,
- BFD_RELOC_HPPA_PCREL_CALL_RS17,
- BFD_RELOC_HPPA_PCREL_CALL_LD21,
- BFD_RELOC_HPPA_PCREL_CALL_RD11,
- BFD_RELOC_HPPA_PCREL_CALL_RD14,
- BFD_RELOC_HPPA_PCREL_CALL_RD17,
- BFD_RELOC_HPPA_PCREL_CALL_LR21,
- BFD_RELOC_HPPA_PCREL_CALL_RR14,
- BFD_RELOC_HPPA_PCREL_CALL_RR17,
-
- BFD_RELOC_HPPA_PLABEL_32,
- BFD_RELOC_HPPA_PLABEL_11,
- BFD_RELOC_HPPA_PLABEL_14,
- BFD_RELOC_HPPA_PLABEL_L21,
- BFD_RELOC_HPPA_PLABEL_R11,
- BFD_RELOC_HPPA_PLABEL_R14,
-
- BFD_RELOC_HPPA_UNWIND_ENTRY,
- BFD_RELOC_HPPA_UNWIND_ENTRIES,
-
- /* i386/elf relocations */
+#define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
+
+/* i386/elf relocations */
BFD_RELOC_386_GOT32,
BFD_RELOC_386_PLT32,
BFD_RELOC_386_COPY,
BFD_RELOC_386_GOTOFF,
BFD_RELOC_386_GOTPC,
- /* this must be the highest numeric value */
- BFD_RELOC_UNUSED
- } bfd_reloc_code_real_type;
-CONST struct reloc_howto_struct *
-
-bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
+/* ns32k relocations */
+ BFD_RELOC_NS32K_IMM_8,
+ BFD_RELOC_NS32K_IMM_16,
+ BFD_RELOC_NS32K_IMM_32,
+ BFD_RELOC_NS32K_IMM_8_PCREL,
+ BFD_RELOC_NS32K_IMM_16_PCREL,
+ BFD_RELOC_NS32K_IMM_32_PCREL,
+ BFD_RELOC_NS32K_DISP_8,
+ BFD_RELOC_NS32K_DISP_16,
+ BFD_RELOC_NS32K_DISP_32,
+ BFD_RELOC_NS32K_DISP_8_PCREL,
+ BFD_RELOC_NS32K_DISP_16_PCREL,
+ BFD_RELOC_NS32K_DISP_32_PCREL,
+
+/* PowerPC/POWER (RS/6000) relocs.
+26 bit relative branch. Low two bits must be zero. High 24
+bits installed in bits 6 through 29 of instruction. */
+ BFD_RELOC_PPC_B26,
+
+/* 26 bit absolute branch, like BFD_RELOC_PPC_B26 but absolute. */
+ BFD_RELOC_PPC_BA26,
+
+/* 16 bit TOC relative reference. */
+ BFD_RELOC_PPC_TOC16,
+
+/* The type of reloc used to build a contructor table - at the moment
+probably a 32 bit wide absolute relocation, but the target can choose.
+It generally does map to one of the other relocation types. */
+ BFD_RELOC_CTOR,
-unsigned int
-bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
+/* ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
+not stored in the instruction. */
+ BFD_RELOC_ARM_PCREL_BRANCH,
+
+/* These relocs are only used within the ARM assembler. They are not
+(at present) written to any object files. */
+ BFD_RELOC_ARM_IMMEDIATE,
+ BFD_RELOC_ARM_OFFSET_IMM,
+ BFD_RELOC_ARM_SHIFT_IMM,
+ BFD_RELOC_ARM_SWI,
+ BFD_RELOC_ARM_MULTI,
+ BFD_RELOC_ARM_CP_OFF_IMM,
+/* start-sanitize-arc */
+
+/* Argonaut RISC Core (ARC) relocs.
+ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
+not stored in the instruction. High 20 bits installed in bits 7 through 26
+of instruction. */
+ BFD_RELOC_ARC_B22_PCREL,
+/* end-sanitize-arc */
+
+ BFD_RELOC_UNUSED };
+typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
+const struct reloc_howto_struct *
-unsigned int
-bfd_canonicalize_reloc
- PARAMS ((bfd *abfd,
- asection *sec,
- arelent **loc,
- asymbol **syms));
+bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
-void
-bfd_set_reloc
- PARAMS ((bfd *abfd, sec_ptr *sec, arelent **rel, unsigned int count)
-
- );
+const char *
+bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code));
-typedef struct symbol_cache_entry
+typedef struct symbol_cache_entry
{
/* A pointer to the BFD which owns the symbol. This information
is necessary so that a back end can work out what additional
for ELF STT_FILE symbols. */
#define BSF_FILE 0x4000
+ /* Symbol is from dynamic linking information. */
+#define BSF_DYNAMIC 0x8000
+
flagword flags;
- /* A pointer to the section to which this symbol is
+ /* A pointer to the section to which this symbol is
relative. This will always be non NULL, there are special
- sections for undefined and absolute symbols */
+ sections for undefined and absolute symbols. */
struct sec *section;
- /* Back end special data. This is being phased out in favour
- of making this a union. */
- PTR udata;
+ /* Back end special data. */
+ union
+ {
+ PTR p;
+ bfd_vma i;
+ } udata;
} asymbol;
-#define get_symtab_upper_bound(abfd) \
- BFD_SEND (abfd, _get_symtab_upper_bound, (abfd))
+#define bfd_get_symtab_upper_bound(abfd) \
+ BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
+boolean
+bfd_is_local_label PARAMS ((bfd *abfd, asymbol *sym));
+
+#define bfd_is_local_label(abfd, sym) \
+ BFD_SEND (abfd, _bfd_is_local_label,(abfd, sym))
#define bfd_canonicalize_symtab(abfd, location) \
BFD_SEND (abfd, _bfd_canonicalize_symtab,\
(abfd, location))
CONST char *filename;
/* A pointer to the target jump table. */
- struct bfd_target *xvec;
+ const struct bfd_target *xvec;
/* To avoid dragging too many header files into every file that
includes `<<bfd.h>>', IOSTREAM has been declared as a "char
struct _bfd *archive_head; /* The first BFD in the archive. */
boolean has_armap;
+ /* A chain of BFD structures involved in a link. */
+ struct _bfd *link_next;
+
+ /* A field used by _bfd_generic_link_add_archive_symbols. This will
+ be used only for archive elements. */
+ int archive_pass;
+
/* Used by the back end to hold private data. */
union
struct trad_core_struct *trad_core_data;
struct som_data_struct *som_data;
struct hpux_core_struct *hpux_core_data;
+ struct hppabsd_core_struct *hppabsd_core_data;
struct sgi_core_struct *sgi_core_data;
struct lynx_core_struct *lynx_core_data;
struct osf_core_struct *osf_core_data;
+ struct cisco_core_struct *cisco_core_data;
PTR any;
} tdata;
/* Where all the allocated stuff under this BFD goes */
struct obstack memory;
-
- /* Is this really needed in addition to usrdata? */
- asymbol **ld_symbols;
};
+typedef enum bfd_error
+{
+ bfd_error_no_error = 0,
+ bfd_error_system_call,
+ bfd_error_invalid_target,
+ bfd_error_wrong_format,
+ bfd_error_invalid_operation,
+ bfd_error_no_memory,
+ bfd_error_no_symbols,
+ bfd_error_no_more_archived_files,
+ bfd_error_malformed_archive,
+ bfd_error_file_not_recognized,
+ bfd_error_file_ambiguously_recognized,
+ bfd_error_no_contents,
+ bfd_error_nonrepresentable_section,
+ bfd_error_no_debug_section,
+ bfd_error_bad_value,
+ bfd_error_file_truncated,
+ bfd_error_invalid_error_code
+} bfd_error_type;
+
+bfd_error_type
+bfd_get_error PARAMS ((void));
+
+void
+bfd_set_error PARAMS ((bfd_error_type error_tag));
+
+CONST char *
+bfd_errmsg PARAMS ((bfd_error_type error_tag));
+
+void
+bfd_perror PARAMS ((CONST char *message));
+
+long
+bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
+
+long
+bfd_canonicalize_reloc
+ PARAMS ((bfd *abfd,
+ asection *sec,
+ arelent **loc,
+ asymbol **syms));
+
+void
+bfd_set_reloc
+ PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count)
+
+ );
+
boolean
bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags));
bfd_vma
bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base));
+boolean
+bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
+
+#define bfd_copy_private_bfd_data(ibfd, obfd) \
+ BFD_SEND (ibfd, _bfd_copy_private_bfd_data, \
+ (ibfd, obfd))
#define bfd_sizeof_headers(abfd, reloc) \
BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
#define bfd_stat_arch_elt(abfd, stat) \
BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
+#define bfd_update_armap_timestamp(abfd) \
+ BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
+
#define bfd_set_arch_mach(abfd, arch, mach)\
BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
-#define bfd_get_relocated_section_contents(abfd, seclet, data, relocateable) \
- BFD_SEND (abfd, _bfd_get_relocated_section_contents, (abfd, seclet, data, relocateable))
+#define bfd_get_relocated_section_contents(abfd, link_info, link_order, data, relocateable, symbols) \
+ BFD_SEND (abfd, _bfd_get_relocated_section_contents, \
+ (abfd, link_info, link_order, data, relocateable, symbols))
-#define bfd_relax_section(abfd, section, symbols) \
- BFD_SEND (abfd, _bfd_relax_section, (abfd, section, symbols))
+#define bfd_relax_section(abfd, section, link_info, again) \
+ BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
+
+#define bfd_link_hash_table_create(abfd) \
+ BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
+
+#define bfd_link_add_symbols(abfd, info) \
+ BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
+
+#define bfd_final_link(abfd, info) \
+ BFD_SEND (abfd, _bfd_final_link, (abfd, info))
+
+#define bfd_free_cached_info(abfd) \
+ BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
+
+#define bfd_get_dynamic_symtab_upper_bound(abfd) \
+ BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
+
+#define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
+ BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
+
+#define bfd_get_dynamic_reloc_upper_bound(abfd) \
+ BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
+
+#define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
+ BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
-#define bfd_seclet_link(abfd, data, relocateable) \
- BFD_SEND (abfd, _bfd_seclet_link, (abfd, data, relocateable))
symindex
bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym));
#define BFD_SEND(bfd, message, arglist) \
((*((bfd)->xvec->message)) arglist)
+
+#ifdef DEBUG_BFD_SEND
+#undef BFD_SEND
+#define BFD_SEND(bfd, message, arglist) \
+ (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
+ ((*((bfd)->xvec->message)) arglist) : \
+ (bfd_assert (__FILE__,__LINE__), NULL))
+#endif
#define BFD_SEND_FMT(bfd, message, arglist) \
(((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
+
+#ifdef DEBUG_BFD_SEND
+#undef BFD_SEND_FMT
+#define BFD_SEND_FMT(bfd, message, arglist) \
+ (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
+ (((bfd)->xvec->message[(int)((bfd)->format)]) arglist) : \
+ (bfd_assert (__FILE__,__LINE__), NULL))
+#endif
enum bfd_flavour {
bfd_target_unknown_flavour,
bfd_target_aout_flavour,
bfd_target_oasys_flavour,
bfd_target_tekhex_flavour,
bfd_target_srec_flavour,
- bfd_target_som_flavour};
+ bfd_target_som_flavour,
+ bfd_target_os9k_flavour};
+
+ /* Forward declaration. */
+typedef struct bfd_link_info _bfd_link_info;
+
typedef struct bfd_target
{
char *name;
char ar_pad_char;
unsigned short ar_max_namelen;
unsigned int align_power_min;
- bfd_vma (*bfd_getx64) PARAMS ((bfd_byte *));
- bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((bfd_byte *));
+ bfd_vma (*bfd_getx64) PARAMS ((const bfd_byte *));
+ bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *));
void (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_getx32) PARAMS ((bfd_byte *));
- bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((bfd_byte *));
+ bfd_vma (*bfd_getx32) PARAMS ((const bfd_byte *));
+ bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((const bfd_byte *));
void (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_getx16) PARAMS ((bfd_byte *));
- bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((bfd_byte *));
+ bfd_vma (*bfd_getx16) PARAMS ((const bfd_byte *));
+ bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((const bfd_byte *));
void (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_h_getx64) PARAMS ((bfd_byte *));
- bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((bfd_byte *));
+ bfd_vma (*bfd_h_getx64) PARAMS ((const bfd_byte *));
+ bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((const bfd_byte *));
void (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_h_getx32) PARAMS ((bfd_byte *));
- bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((bfd_byte *));
+ bfd_vma (*bfd_h_getx32) PARAMS ((const bfd_byte *));
+ bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((const bfd_byte *));
void (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *));
- bfd_vma (*bfd_h_getx16) PARAMS ((bfd_byte *));
- bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((bfd_byte *));
+ bfd_vma (*bfd_h_getx16) PARAMS ((const bfd_byte *));
+ bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *));
void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
- struct bfd_target * (*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
+ const struct bfd_target *(*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
+
+ /* Generic entry points. */
+#define BFD_JUMP_TABLE_GENERIC(NAME)\
+CAT(NAME,_close_and_cleanup),\
+CAT(NAME,_bfd_free_cached_info),\
+CAT(NAME,_new_section_hook),\
+CAT(NAME,_get_section_contents)
+ /* Called when the BFD is being closed to do any necessary cleanup. */
+ boolean (*_close_and_cleanup) PARAMS ((bfd *));
+ /* Ask the BFD to free all cached information. */
+ boolean (*_bfd_free_cached_info) PARAMS ((bfd *));
+ /* Called when a new section is created. */
+ boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
+ /* Read the contents of a section. */
+ boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
+ file_ptr, bfd_size_type));
+
+ /* Entry points to copy private data. */
+#define BFD_JUMP_TABLE_COPY(NAME)\
+CAT(NAME,_bfd_copy_private_bfd_data),\
+CAT(NAME,_bfd_copy_private_section_data)
+ /* Called to copy BFD general private data from one object file
+ to another. */
+ boolean (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
+ /* Called to copy BFD private section data from one object file
+ to another. */
+ boolean (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr,
+ bfd *, sec_ptr));
+
+ /* Core file entry points. */
+#define BFD_JUMP_TABLE_CORE(NAME)\
+CAT(NAME,_core_file_failing_command),\
+CAT(NAME,_core_file_failing_signal),\
+CAT(NAME,_core_file_matches_executable_p)
char * (*_core_file_failing_command) PARAMS ((bfd *));
int (*_core_file_failing_signal) PARAMS ((bfd *));
boolean (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *));
+
+ /* Archive entry points. */
+#define BFD_JUMP_TABLE_ARCHIVE(NAME)\
+CAT(NAME,_slurp_armap),\
+CAT(NAME,_slurp_extended_name_table),\
+CAT(NAME,_construct_extended_name_table),\
+CAT(NAME,_truncate_arname),\
+CAT(NAME,_write_armap),\
+CAT(NAME,_openr_next_archived_file),\
+CAT(NAME,_generic_stat_arch_elt),\
+CAT(NAME,_update_armap_timestamp)
boolean (*_bfd_slurp_armap) PARAMS ((bfd *));
boolean (*_bfd_slurp_extended_name_table) PARAMS ((bfd *));
+ boolean (*_bfd_construct_extended_name_table)
+ PARAMS ((bfd *, char **, bfd_size_type *, const char **));
void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
boolean (*write_armap) PARAMS ((bfd *arch,
unsigned int elength,
struct orl *map,
unsigned int orl_count,
int stridx));
- boolean (*_close_and_cleanup) PARAMS ((bfd *));
- boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
- file_ptr, bfd_size_type));
- boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
- file_ptr, bfd_size_type));
- boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
- unsigned int (*_get_symtab_upper_bound) PARAMS ((bfd *));
- unsigned int (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
- struct symbol_cache_entry **));
- unsigned int (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
- unsigned int (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
- struct symbol_cache_entry **));
+ bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
+ int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
+ boolean (*_bfd_update_armap_timestamp) PARAMS ((bfd *));
+
+ /* Entry points used for symbols. */
+#define BFD_JUMP_TABLE_SYMBOLS(NAME)\
+CAT(NAME,_get_symtab_upper_bound),\
+CAT(NAME,_get_symtab),\
+CAT(NAME,_make_empty_symbol),\
+CAT(NAME,_print_symbol),\
+CAT(NAME,_get_symbol_info),\
+CAT(NAME,_bfd_is_local_label),\
+CAT(NAME,_get_lineno),\
+CAT(NAME,_find_nearest_line),\
+CAT(NAME,_bfd_make_debug_symbol)
+ long (*_bfd_get_symtab_upper_bound) PARAMS ((bfd *));
+ long (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
+ struct symbol_cache_entry **));
struct symbol_cache_entry *
(*_bfd_make_empty_symbol) PARAMS ((bfd *));
void (*_bfd_print_symbol) PARAMS ((bfd *, PTR,
struct symbol_cache_entry *,
symbol_info *));
#define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
- alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
-
- boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
- unsigned long));
+ boolean (*_bfd_is_local_label) PARAMS ((bfd *, asymbol *));
- bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
-
+ alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
boolean (*_bfd_find_nearest_line) PARAMS ((bfd *abfd,
struct sec *section, struct symbol_cache_entry **symbols,
bfd_vma offset, CONST char **file, CONST char **func,
unsigned int *line));
-
- int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
-
- int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
-
- void (*_bfd_debug_info_start) PARAMS ((bfd *));
- void (*_bfd_debug_info_end) PARAMS ((bfd *));
- void (*_bfd_debug_info_accumulate) PARAMS ((bfd *, struct sec *));
-
- bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
- struct bfd_seclet *, bfd_byte *data,
- boolean relocateable));
-
- boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
- struct symbol_cache_entry **));
-
- boolean (*_bfd_seclet_link) PARAMS ((bfd *, PTR data,
- boolean relocateable));
- /* See documentation on reloc types. */
- CONST struct reloc_howto_struct *
- (*reloc_type_lookup) PARAMS ((bfd *abfd,
- bfd_reloc_code_real_type code));
-
/* Back-door to allow format-aware applications to create debug symbols
while using BFD for everything else. Currently used by the assembler
when creating COFF files. */
bfd *abfd,
void *ptr,
unsigned long size));
+
+ /* Routines for relocs. */
+#define BFD_JUMP_TABLE_RELOCS(NAME)\
+CAT(NAME,_get_reloc_upper_bound),\
+CAT(NAME,_canonicalize_reloc),\
+CAT(NAME,_bfd_reloc_type_lookup)
+ long (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
+ long (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
+ struct symbol_cache_entry **));
+ /* See documentation on reloc types. */
+ CONST struct reloc_howto_struct *
+ (*reloc_type_lookup) PARAMS ((bfd *abfd,
+ bfd_reloc_code_real_type code));
+
+ /* Routines used when writing an object file. */
+#define BFD_JUMP_TABLE_WRITE(NAME)\
+CAT(NAME,_set_arch_mach),\
+CAT(NAME,_set_section_contents)
+ boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
+ unsigned long));
+ boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
+ file_ptr, bfd_size_type));
+
+ /* Routines used by the linker. */
+#define BFD_JUMP_TABLE_LINK(NAME)\
+CAT(NAME,_sizeof_headers),\
+CAT(NAME,_bfd_get_relocated_section_contents),\
+CAT(NAME,_bfd_relax_section),\
+CAT(NAME,_bfd_link_hash_table_create),\
+CAT(NAME,_bfd_link_add_symbols),\
+CAT(NAME,_bfd_final_link)
+ int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
+ bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
+ struct bfd_link_info *, struct bfd_link_order *,
+ bfd_byte *data, boolean relocateable,
+ struct symbol_cache_entry **));
+
+ boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
+ struct bfd_link_info *, boolean *again));
+
+ /* Create a hash table for the linker. Different backends store
+ different information in this table. */
+ struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *));
+
+ /* Add symbols from this object file into the hash table. */
+ boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
+
+ /* Do a link based on the link_order structures attached to each
+ section of the BFD. */
+ boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
+
+ /* Routines to handle dynamic symbols and relocs. */
+#define BFD_JUMP_TABLE_DYNAMIC(NAME)\
+CAT(NAME,_get_dynamic_symtab_upper_bound),\
+CAT(NAME,_canonicalize_dynamic_symtab),\
+CAT(NAME,_get_dynamic_reloc_upper_bound),\
+CAT(NAME,_canonicalize_dynamic_reloc)
+ /* Get the amount of memory required to hold the dynamic symbols. */
+ long (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *));
+ /* Read in the dynamic symbols. */
+ long (*_bfd_canonicalize_dynamic_symtab)
+ PARAMS ((bfd *, struct symbol_cache_entry **));
+ /* Get the amount of memory required to hold the dynamic relocs. */
+ long (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *));
+ /* Read in the dynamic relocs. */
+ long (*_bfd_canonicalize_dynamic_reloc)
+ PARAMS ((bfd *, arelent **, struct symbol_cache_entry **));
+
PTR backend_data;
} bfd_target;
-bfd_target *
+const bfd_target *
bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd));
-CONST char **
+const char **
bfd_target_list PARAMS ((void));
boolean
bfd_check_format PARAMS ((bfd *abfd, bfd_format format));
+boolean
+bfd_check_format_matches PARAMS ((bfd *abfd, bfd_format format, char ***matching));
+
boolean
bfd_set_format PARAMS ((bfd *abfd, bfd_format format));
projects / deliverable / binutils-gdb.git / blobdiff