/* typedef off_t file_ptr; */
typedef long int file_ptr;
-/* Support for different sizes of target format ints and addresses. If the
- host implements 64-bit values, it defines BFD_HOST_64_BIT to be the appropriate
- type. Otherwise, this code will fall back on gcc's "long long" type if gcc
- is being used. BFD_HOST_64_BIT must be defined in such a way as to be a valid
- type name by itself or with "unsigned" prefixed. It should be a signed
- type by itself.
+/* Support for different sizes of target format ints and addresses.
+ If the host implements 64-bit values, it defines BFD_HOST_64_BIT to
+ be the appropriate type. Otherwise, this code will fall back on
+ gcc's "long long" type if gcc is being used. BFD_HOST_64_BIT must
+ be defined in such a way as to be a valid type name by itself or
+ with "unsigned" prefixed. It should be a signed type by itself.
- If neither is the case, then compilation will fail if 64-bit targets are
- requested. If you don't request any 64-bit targets, you should be safe. */
+ If neither is the case, then compilation will fail if 64-bit
+ targets are requested. If you don't request any 64-bit targets,
+ you should be safe. */
#ifdef BFD64
#define D_PAGED 0x100
/* BFD is relaxable (this means that bfd_relax_section may be able to
- do something). */
+ do something) (sometimes bfd_relax_section can do something even if
+ this is not set). */
#define BFD_IS_RELAXABLE 0x200
/* This may be set before writing out a BFD to request using a
\f
/* object and core file sections */
-
#define align_power(addr, align) \
( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
\f
/* User program access to BFD facilities */
+/* Direct I/O routines, for programs which know more about the object
+ file than BFD does. Use higher level routines if possible. */
+
+extern bfd_size_type bfd_read
+ PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
+extern bfd_size_type bfd_write
+ PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
+extern int bfd_seek PARAMS ((bfd *abfd, const file_ptr fp, int direction));
+extern long bfd_tell PARAMS ((bfd *abfd));
+extern int bfd_flush PARAMS ((bfd *abfd));
+extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
+
/* Cast from const char * to char * so that caller can assign to
a char * without a warning. */
#define bfd_get_filename(abfd) ((char *) (abfd)->filename)
extern boolean bfd_elf64_record_link_assignment
PARAMS ((bfd *, struct bfd_link_info *, const char *));
extern boolean bfd_elf32_size_dynamic_sections
- PARAMS ((bfd *, struct bfd_link_info *, struct sec **));
+ PARAMS ((bfd *, const char *, const char *, struct bfd_link_info *,
+ struct sec **));
extern boolean bfd_elf64_size_dynamic_sections
- PARAMS ((bfd *, struct bfd_link_info *, struct sec **));
+ PARAMS ((bfd *, const char *, const char *, struct bfd_link_info *,
+ struct sec **));
+extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
/* SunOS shared library support routines for the linker. */
PARAMS ((bfd *, struct bfd_link_info *, struct sec **, struct sec **,
struct sec **));
+/* Linux shared library support routines for the linker. */
+
+extern boolean bfd_linux_size_dynamic_sections
+ PARAMS ((bfd *, struct bfd_link_info *));
+
/* And more from the source. */
void
bfd_init PARAMS ((void));
multiple times, the value of a symbol is the amount of
space it requires, and the largest symbol value is the one
used). Most targets have exactly one of these (which we
- translate to bfd_com_section), but ECOFF has two. */
+ translate to bfd_com_section_ptr), but ECOFF has two. */
#define SEC_IS_COMMON 0x8000
/* The section contains only debugging information. For
struct bfd_link_order *link_order_tail;
} asection ;
-
/* These sections are global, and are managed by BFD. The application
and target back end are not permitted to change the values in
- these sections. */
+ these sections. New code should use the section_ptr macros rather
+ than referring directly to the const sections. The const sections
+ may eventually vanish. */
#define BFD_ABS_SECTION_NAME "*ABS*"
#define BFD_UND_SECTION_NAME "*UND*"
#define BFD_COM_SECTION_NAME "*COM*"
#define BFD_IND_SECTION_NAME "*IND*"
/* the absolute section */
-extern asection bfd_abs_section;
+extern const asection bfd_abs_section;
+#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
+#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
/* Pointer to the undefined section */
-extern asection bfd_und_section;
+extern const asection bfd_und_section;
+#define bfd_und_section_ptr ((asection *) &bfd_und_section)
+#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
/* Pointer to the common section */
-extern asection bfd_com_section;
+extern const asection bfd_com_section;
+#define bfd_com_section_ptr ((asection *) &bfd_com_section)
/* Pointer to the indirect section */
-extern asection bfd_ind_section;
-
-extern struct symbol_cache_entry *bfd_abs_symbol;
-extern struct symbol_cache_entry *bfd_com_symbol;
-extern struct symbol_cache_entry *bfd_und_symbol;
-extern struct symbol_cache_entry *bfd_ind_symbol;
+extern const asection bfd_ind_section;
+#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
+#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
+
+extern const struct symbol_cache_entry * const bfd_abs_symbol;
+extern const struct symbol_cache_entry * const bfd_com_symbol;
+extern const struct symbol_cache_entry * const bfd_und_symbol;
+extern const struct symbol_cache_entry * const bfd_ind_symbol;
#define bfd_get_section_size_before_reloc(section) \
(section->reloc_done ? (abort(),1): (section)->_raw_size)
#define bfd_get_section_size_after_reloc(section) \
#define bfd_mach_i960_mc 4
#define bfd_mach_i960_xa 5
#define bfd_mach_i960_ca 6
+ /* start-sanitize-i960xl */
+#define bfd_mach_i960_xl 7
+ /* end-sanitize-i960xl */
bfd_arch_a29k, /* AMD 29000 */
bfd_arch_sparc, /* SPARC */
bfd_arch_h8500, /* Hitachi H8/500 */
bfd_arch_sh, /* Hitachi SH */
bfd_arch_alpha, /* Dec Alpha */
+ bfd_arch_ns32k, /* National Semiconductors ns32000 */
bfd_arch_last
};
complain_overflow_unsigned
};
-typedef struct reloc_howto_struct
+typedef unsigned char bfd_byte;
+typedef struct reloc_howto_struct reloc_howto_type;
+
+struct reloc_howto_struct
{
/* The type field has mainly a documetary use - the back end can
do what it wants with it, though normally the back end's
empty (e.g., m88k bcs); this flag signals the fact.*/
boolean pcrel_offset;
-} reloc_howto_type;
+};
#define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
{(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
int
bfd_get_reloc_size PARAMS ((const reloc_howto_type *));
-typedef unsigned char bfd_byte;
-
typedef struct relent_chain {
arelent relent;
struct relent_chain *next;
BFD_RELOC_SPARC_BASE13,
BFD_RELOC_SPARC_BASE22,
- /* start-sanitize-v9 */
+ /* some relocations we're using for sparc v9
+ -- subject to change */
BFD_RELOC_SPARC_10,
BFD_RELOC_SPARC_11,
#define BFD_RELOC_SPARC_64 BFD_RELOC_64
BFD_RELOC_SPARC_WDISP19,
BFD_RELOC_SPARC_GLOB_JMP,
BFD_RELOC_SPARC_LO7,
- /* end-sanitize-v9 */
/* Alpha ECOFF relocations. Some of these treat the symbol or "addend"
in some special way. */
BFD_RELOC_386_GOTOFF,
BFD_RELOC_386_GOTPC,
+ /* ns32k relocations */
+ BFD_RELOC_NS32K_IMM_8,
+ BFD_RELOC_NS32K_IMM_16,
+ BFD_RELOC_NS32K_IMM_32,
+ BFD_RELOC_NS32K_IMM_8_PCREL,
+ BFD_RELOC_NS32K_IMM_16_PCREL,
+ BFD_RELOC_NS32K_IMM_32_PCREL,
+ BFD_RELOC_NS32K_DISP_8,
+ BFD_RELOC_NS32K_DISP_16,
+ BFD_RELOC_NS32K_DISP_32,
+ BFD_RELOC_NS32K_DISP_8_PCREL,
+ BFD_RELOC_NS32K_DISP_16_PCREL,
+ BFD_RELOC_NS32K_DISP_32_PCREL,
+
/* PowerPC/POWER (RS/6000) relocs. */
/* 26 bit relative branch. Low two bits must be zero. High 24
bits installed in bits 6 through 29 of instruction. */
CONST char *filename;
/* A pointer to the target jump table. */
- struct bfd_target *xvec;
+ const struct bfd_target *xvec;
/* To avoid dragging too many header files into every file that
includes `<<bfd.h>>', IOSTREAM has been declared as a "char
#define bfd_stat_arch_elt(abfd, stat) \
BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
+#define bfd_update_armap_timestamp(abfd) \
+ BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
+
#define bfd_set_arch_mach(abfd, arch, mach)\
BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
bfd_vma (*bfd_h_getx16) PARAMS ((const bfd_byte *));
bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *));
void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
- struct bfd_target * (*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
+ const struct bfd_target *(*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
CAT(NAME,_truncate_arname),\
CAT(NAME,_write_armap),\
CAT(NAME,_openr_next_archived_file),\
-CAT(NAME,_generic_stat_arch_elt)
+CAT(NAME,_generic_stat_arch_elt),\
+CAT(NAME,_update_armap_timestamp)
boolean (*_bfd_slurp_armap) PARAMS ((bfd *));
boolean (*_bfd_slurp_extended_name_table) PARAMS ((bfd *));
void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
struct orl *map,
unsigned int orl_count,
int stridx));
- bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
- int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
-
+ bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
+ int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
+ boolean (*_bfd_update_armap_timestamp) PARAMS ((bfd *));
+
/* Entry points used for symbols. */
#define BFD_JUMP_TABLE_SYMBOLS(NAME)\
CAT(NAME,_get_symtab_upper_bound),\
PTR backend_data;
} bfd_target;
-bfd_target *
+const bfd_target *
bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd));
-CONST char **
+const char **
bfd_target_list PARAMS ((void));
boolean
projects / deliverable / binutils-gdb.git / blobdiff