/* Main header file for the bfd library -- portable access to object files.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ Free Software Foundation, Inc.
Contributed by Cygnus Support.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
#ifndef __BFD_H_SEEN__
#define __BFD_H_SEEN__
#endif
#endif
+/* This is a utility macro to handle the situation where the code
+ wants to place a constant string into the code, followed by a
+ comma and then the length of the string. Doing this by hand
+ is error prone, so using this macro is safer. */
+#define STRING_COMMA_LEN(STR) (STR), (sizeof (STR) - 1)
+/* Unfortunately it is not possible to use the STRING_COMMA_LEN macro
+ to create the arguments to another macro, since the preprocessor
+ will mis-count the number of arguments to the outer macro (by not
+ evaluating STRING_COMMA_LEN and so missing the comma). This is a
+ problem for example when trying to use STRING_COMMA_LEN to build
+ the arguments to the strncmp() macro. Hence this alternative
+ definition of strncmp is provided here.
+
+ Note - these macros do NOT work if STR2 is not a constant string. */
+#define CONST_STRNEQ(STR1,STR2) (strncmp ((STR1), (STR2), sizeof (STR2) - 1) == 0)
+ /* strcpy() can have a similar problem, but since we know we are
+ copying a constant string, we can use memcpy which will be faster
+ since there is no need to check for a NUL byte inside STR. We
+ can also save time if we do not need to copy the terminating NUL. */
+#define LITMEMCPY(DEST,STR2) memcpy ((DEST), (STR2), sizeof (STR2) - 1)
+#define LITSTRCPY(DEST,STR2) memcpy ((DEST), (STR2), sizeof (STR2))
+
+
/* The word size used by BFD on the host. This may be 64 with a 32
bit target if the host is 64 bit, or if other 64 bit targets have
been selected with --enable-targets, or if --enable-64-bit-bfd. */
#define BFD_DEFAULT_TARGET_SIZE @bfd_default_target_size@
#define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
-#define BFD_HOST_LONG_LONG @BFD_HOST_LONG_LONG@
+#define BFD_HOST_64BIT_LONG_LONG @BFD_HOST_64BIT_LONG_LONG@
#if @BFD_HOST_64_BIT_DEFINED@
#define BFD_HOST_64_BIT @BFD_HOST_64_BIT@
#define BFD_HOST_U_64_BIT @BFD_HOST_U_64_BIT@
#endif
#endif
+/* Declaring a type wide enough to hold a host long and a host pointer. */
+#define BFD_HOSTPTR_T @BFD_HOSTPTR_T@
+typedef BFD_HOSTPTR_T bfd_hostptr_t;
+
/* Forward declaration. */
typedef struct bfd bfd;
#if BFD_HOST_64BIT_LONG
#define sprintf_vma(s,x) sprintf (s, "%016lx", x)
#define fprintf_vma(f,x) fprintf (f, "%016lx", x)
+#elif BFD_HOST_64BIT_LONG_LONG
+#ifndef __MSVCRT__
+#define sprintf_vma(s,x) sprintf (s, "%016llx", x)
+#define fprintf_vma(f,x) fprintf (f, "%016llx", x)
+#else
+#define sprintf_vma(s,x) sprintf (s, "%016I64x", x)
+#define fprintf_vma(f,x) fprintf (f, "%016I64x", x)
+#endif
#else
#define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff)))
#define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff))
#endif /* not BFD64 */
+#define HALF_BFD_SIZE_TYPE \
+ (((bfd_size_type) 1) << (8 * sizeof (bfd_size_type) / 2))
+
#ifndef BFD_HOST_64_BIT
/* Fall back on a 32 bit type. The idea is to make these types always
available for function return types, but in the case that
(((sec)->rawsize ? (sec)->rawsize : (sec)->size) \
/ bfd_octets_per_byte (bfd))
-typedef struct stat stat_type;
+/* Return TRUE if section has been discarded. */
+#define elf_discarded_section(sec) \
+ (!bfd_is_abs_section (sec) \
+ && bfd_is_abs_section ((sec)->output_section) \
+ && (sec)->sec_info_type != ELF_INFO_TYPE_MERGE \
+ && (sec)->sec_info_type != ELF_INFO_TYPE_JUST_SYMS)
+
+/* Forward define. */
+struct stat;
\f
typedef enum bfd_print_symbol
{
{
/* The hash array. */
struct bfd_hash_entry **table;
- /* The number of slots in the hash table. */
- unsigned int size;
/* A function used to create new elements in the hash table. The
first entry is itself a pointer to an element. When this
function is first invoked, this pointer will be NULL. However,
/* An objalloc for this hash table. This is a struct objalloc *,
but we use void * to avoid requiring the inclusion of objalloc.h. */
void *memory;
+ /* The number of slots in the hash table. */
+ unsigned int size;
+ /* The number of entries in the hash table. */
+ unsigned int count;
+ /* The size of elements. */
+ unsigned int entsize;
+ /* If non-zero, don't grow the hash table. */
+ unsigned int frozen:1;
};
/* Initialize a hash table. */
(struct bfd_hash_table *,
struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
struct bfd_hash_table *,
- const char *));
+ const char *),
+ unsigned int);
/* Initialize a hash table specifying a size. */
extern bfd_boolean bfd_hash_table_init_n
struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
struct bfd_hash_table *,
const char *),
- unsigned int size);
+ unsigned int, unsigned int);
/* Free up a hash table. */
extern void bfd_hash_table_free
(struct bfd_hash_table *, const char *, bfd_boolean create,
bfd_boolean copy);
+/* Insert an entry in a hash table. */
+extern struct bfd_hash_entry *bfd_hash_insert
+ (struct bfd_hash_table *, const char *, unsigned long);
+
/* Replace an entry in a hash table. */
extern void bfd_hash_replace
(struct bfd_hash_table *, struct bfd_hash_entry *old,
DYN_NO_NEEDED = 8
};
+enum notice_asneeded_action {
+ notice_as_needed,
+ notice_not_needed,
+ notice_needed
+};
+
extern bfd_boolean bfd_elf_record_link_assignment
- (bfd *, struct bfd_link_info *, const char *, bfd_boolean);
+ (bfd *, struct bfd_link_info *, const char *, bfd_boolean,
+ bfd_boolean);
extern struct bfd_link_needed_list *bfd_elf_get_needed_list
(bfd *, struct bfd_link_info *);
extern bfd_boolean bfd_elf_get_bfd_needed_list
(bfd *, struct bfd_link_needed_list **);
extern bfd_boolean bfd_elf_size_dynamic_sections
(bfd *, const char *, const char *, const char *, const char * const *,
- struct bfd_link_info *, struct bfd_section **, struct bfd_elf_version_tree *);
+ struct bfd_link_info *, struct bfd_section **,
+ struct bfd_elf_version_tree *);
+extern bfd_boolean bfd_elf_size_dynsym_hash_dynstr
+ (bfd *, struct bfd_link_info *);
extern void bfd_elf_set_dt_needed_name
(bfd *, const char *);
extern const char *bfd_elf_get_dt_soname
(bfd *);
extern void bfd_elf_set_dyn_lib_class
- (bfd *, int);
+ (bfd *, enum dynamic_lib_link_class);
extern int bfd_elf_get_dyn_lib_class
(bfd *);
extern struct bfd_link_needed_list *bfd_elf_get_runpath_list
(bfd *, struct bfd_link_info *);
extern bfd_boolean bfd_elf_discard_info
(bfd *, struct bfd_link_info *);
+extern unsigned int _bfd_elf_default_action_discarded
+ (struct bfd_section *);
/* Return an upper bound on the number of bytes required to store a
copy of ABFD's program header table entries. Return -1 if an error
extern struct bfd_section *_bfd_elf_tls_setup
(bfd *, struct bfd_link_info *);
+extern void _bfd_fix_excluded_sec_syms
+ (bfd *, struct bfd_link_info *);
+
+extern unsigned bfd_m68k_mach_to_features (int);
+
+extern int bfd_m68k_features_to_mach (unsigned);
+
extern bfd_boolean bfd_m68k_elf32_create_embedded_relocs
- (bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *, char **);
+ (bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *,
+ char **);
+
+extern bfd_boolean bfd_bfin_elf32_create_embedded_relocs
+ (bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *,
+ char **);
/* SunOS shared library support routines for the linker. */
extern bfd_boolean bfd_sunos_record_link_assignment
(bfd *, struct bfd_link_info *, const char *);
extern bfd_boolean bfd_sunos_size_dynamic_sections
- (bfd *, struct bfd_link_info *, struct bfd_section **, struct bfd_section **, struct bfd_section **);
+ (bfd *, struct bfd_link_info *, struct bfd_section **,
+ struct bfd_section **, struct bfd_section **);
/* Linux shared library support routines for the linker. */
extern bfd_boolean bfd_m68k_coff_create_embedded_relocs
(bfd *, struct bfd_link_info *, struct bfd_section *, struct bfd_section *, char **);
+/* ARM VFP11 erratum workaround support. */
+typedef enum
+{
+ BFD_ARM_VFP11_FIX_DEFAULT,
+ BFD_ARM_VFP11_FIX_NONE,
+ BFD_ARM_VFP11_FIX_SCALAR,
+ BFD_ARM_VFP11_FIX_VECTOR
+} bfd_arm_vfp11_fix;
+
+extern void bfd_elf32_arm_init_maps
+ (bfd *);
+
+extern void bfd_elf32_arm_set_vfp11_fix
+ (bfd *, struct bfd_link_info *);
+
+extern bfd_boolean bfd_elf32_arm_vfp11_erratum_scan
+ (bfd *, struct bfd_link_info *);
+
+extern void bfd_elf32_arm_vfp11_fix_veneer_locations
+ (bfd *, struct bfd_link_info *);
+
/* ARM Interworking support. Called from linker. */
extern bfd_boolean bfd_arm_allocate_interworking_sections
(struct bfd_link_info *);
(struct bfd_link_info *);
extern bfd_boolean bfd_elf32_arm_process_before_allocation
- (bfd *, struct bfd_link_info *, int);
+ (bfd *, struct bfd_link_info *);
void bfd_elf32_arm_set_target_relocs
- (struct bfd_link_info *, int, char *, int);
+ (bfd *, struct bfd_link_info *, int, char *, int, int, bfd_arm_vfp11_fix,
+ int, int);
extern bfd_boolean bfd_elf32_arm_get_bfd_for_interworking
(bfd *, struct bfd_link_info *);
extern bfd_boolean bfd_elf32_arm_add_glue_sections_to_bfd
(bfd *, struct bfd_link_info *);
+/* ELF ARM mapping symbol support */
+#define BFD_ARM_SPECIAL_SYM_TYPE_MAP (1 << 0)
+#define BFD_ARM_SPECIAL_SYM_TYPE_TAG (1 << 1)
+#define BFD_ARM_SPECIAL_SYM_TYPE_OTHER (1 << 2)
+#define BFD_ARM_SPECIAL_SYM_TYPE_ANY (~0)
+extern bfd_boolean bfd_is_arm_special_symbol_name
+ (const char * name, int type);
+
+extern void bfd_elf32_arm_set_byteswap_code (struct bfd_link_info *, int);
+
/* ARM Note section processing. */
extern bfd_boolean bfd_arm_merge_machines
(bfd *, bfd *);
void bfd_init (void);
/* Extracted from opncls.c. */
+bfd *bfd_fopen (const char *filename, const char *target,
+ const char *mode, int fd);
+
bfd *bfd_openr (const char *filename, const char *target);
bfd *bfd_fdopenr (const char *filename, const char *target, int fd);
file_ptr nbytes,
file_ptr offset),
int (*close) (struct bfd *nbfd,
- void *stream));
+ void *stream),
+ int (*stat) (struct bfd *abfd,
+ void *stream,
+ struct stat *sb));
bfd *bfd_openw (const char *filename, const char *target);
/* Extracted from bfdio.c. */
long bfd_get_mtime (bfd *abfd);
-long bfd_get_size (bfd *abfd);
+file_ptr bfd_get_size (bfd *abfd);
/* Extracted from bfdwin.c. */
/* Extracted from section.c. */
/* The next section in the list belonging to the BFD, or NULL. */
struct bfd_section *next;
+ /* The previous section in the list belonging to the BFD, or NULL. */
+ struct bfd_section *prev;
+
/* The field flags contains attributes of the section. Some
flags are read in from the object file, and some are
synthesized from other information. */
else up the line will take care of it later. */
#define SEC_LINKER_CREATED 0x200000
- /* This section should not be subject to garbage collection. */
+ /* This section should not be subject to garbage collection.
+ Also set to inform the linker that this section should not be
+ listed in the link map as discarded. */
#define SEC_KEEP 0x400000
/* This section contains "short" data, and should be placed
output sections that have an input section. */
unsigned int linker_has_input : 1;
- /* A mark flag used by some linker backends for garbage collection. */
+ /* Mark flag used by some linker backends for garbage collection. */
unsigned int gc_mark : 1;
/* The following flags are used by the ELF linker. */
bfd_size_type size;
/* For input sections, the original size on disk of the section, in
- octets. This field is used by the linker relaxation code. It is
- currently only set for sections where the linker relaxation scheme
- doesn't cache altered section and reloc contents (stabs, eh_frame,
- SEC_MERGE, some coff relaxing targets), and thus the original size
- needs to be kept to read the section multiple times.
- For output sections, rawsize holds the section size calculated on
- a previous linker relaxation pass. */
+ octets. This field should be set for any section whose size is
+ changed by linker relaxation. It is required for sections where
+ the linker relaxation scheme doesn't cache altered section and
+ reloc contents (stabs, eh_frame, SEC_MERGE, some coff relaxing
+ targets), and thus the original size needs to be kept to read the
+ section multiple times. For output sections, rawsize holds the
+ section size calculated on a previous linker relaxation pass. */
bfd_size_type rawsize;
/* If this section is going to be output, then this value is the
struct bfd_symbol *symbol;
struct bfd_symbol **symbol_ptr_ptr;
- struct bfd_link_order *link_order_head;
- struct bfd_link_order *link_order_tail;
+ /* Early in the link process, map_head and map_tail are used to build
+ a list of input sections attached to an output section. Later,
+ output sections use these fields for a list of bfd_link_order
+ structs. */
+ union {
+ struct bfd_link_order *link_order;
+ struct bfd_section *s;
+ } map_head, map_tail;
} asection;
/* These sections are global, and are managed by BFD. The application
|| ((SEC) == bfd_com_section_ptr) \
|| ((SEC) == bfd_ind_section_ptr))
-extern const struct bfd_symbol * const bfd_abs_symbol;
-extern const struct bfd_symbol * const bfd_com_symbol;
-extern const struct bfd_symbol * const bfd_und_symbol;
-extern const struct bfd_symbol * const bfd_ind_symbol;
-
/* Macros to handle insertion and deletion of a bfd's sections. These
only handle the list pointers, ie. do not adjust section_count,
target_index etc. */
-#define bfd_section_list_remove(ABFD, PS) \
+#define bfd_section_list_remove(ABFD, S) \
+ do \
+ { \
+ asection *_s = S; \
+ asection *_next = _s->next; \
+ asection *_prev = _s->prev; \
+ if (_prev) \
+ _prev->next = _next; \
+ else \
+ (ABFD)->sections = _next; \
+ if (_next) \
+ _next->prev = _prev; \
+ else \
+ (ABFD)->section_last = _prev; \
+ } \
+ while (0)
+#define bfd_section_list_append(ABFD, S) \
do \
{ \
- asection **_ps = PS; \
- asection *_s = *_ps; \
- *_ps = _s->next; \
- if (_s->next == NULL) \
- (ABFD)->section_tail = _ps; \
+ asection *_s = S; \
+ bfd *_abfd = ABFD; \
+ _s->next = NULL; \
+ if (_abfd->section_last) \
+ { \
+ _s->prev = _abfd->section_last; \
+ _abfd->section_last->next = _s; \
+ } \
+ else \
+ { \
+ _s->prev = NULL; \
+ _abfd->sections = _s; \
+ } \
+ _abfd->section_last = _s; \
+ } \
+ while (0)
+#define bfd_section_list_prepend(ABFD, S) \
+ do \
+ { \
+ asection *_s = S; \
+ bfd *_abfd = ABFD; \
+ _s->prev = NULL; \
+ if (_abfd->sections) \
+ { \
+ _s->next = _abfd->sections; \
+ _abfd->sections->prev = _s; \
+ } \
+ else \
+ { \
+ _s->next = NULL; \
+ _abfd->section_last = _s; \
+ } \
+ _abfd->sections = _s; \
} \
while (0)
-#define bfd_section_list_insert(ABFD, PS, S) \
+#define bfd_section_list_insert_after(ABFD, A, S) \
do \
{ \
- asection **_ps = PS; \
+ asection *_a = A; \
asection *_s = S; \
- _s->next = *_ps; \
- *_ps = _s; \
- if (_s->next == NULL) \
- (ABFD)->section_tail = &_s->next; \
+ asection *_next = _a->next; \
+ _s->next = _next; \
+ _s->prev = _a; \
+ _a->next = _s; \
+ if (_next) \
+ _next->prev = _s; \
+ else \
+ (ABFD)->section_last = _s; \
} \
while (0)
+#define bfd_section_list_insert_before(ABFD, B, S) \
+ do \
+ { \
+ asection *_b = B; \
+ asection *_s = S; \
+ asection *_prev = _b->prev; \
+ _s->prev = _prev; \
+ _s->next = _b; \
+ _b->prev = _s; \
+ if (_prev) \
+ _prev->next = _s; \
+ else \
+ (ABFD)->sections = _s; \
+ } \
+ while (0)
+#define bfd_section_removed_from_list(ABFD, S) \
+ ((S)->next == NULL ? (ABFD)->section_last != (S) : (S)->next->prev != (S))
+
+#define BFD_FAKE_SECTION(SEC, FLAGS, SYM, NAME, IDX) \
+ /* name, id, index, next, prev, flags, user_set_vma, */ \
+ { NAME, IDX, 0, NULL, NULL, FLAGS, 0, \
+ \
+ /* linker_mark, linker_has_input, gc_mark, */ \
+ 0, 0, 1, \
+ \
+ /* segment_mark, sec_info_type, use_rela_p, has_tls_reloc, */ \
+ 0, 0, 0, 0, \
+ \
+ /* has_gp_reloc, need_finalize_relax, reloc_done, */ \
+ 0, 0, 0, \
+ \
+ /* vma, lma, size, rawsize */ \
+ 0, 0, 0, 0, \
+ \
+ /* output_offset, output_section, alignment_power, */ \
+ 0, (struct bfd_section *) &SEC, 0, \
+ \
+ /* relocation, orelocation, reloc_count, filepos, rel_filepos, */ \
+ NULL, NULL, 0, 0, 0, \
+ \
+ /* line_filepos, userdata, contents, lineno, lineno_count, */ \
+ 0, NULL, NULL, NULL, 0, \
+ \
+ /* entsize, kept_section, moving_line_filepos, */ \
+ 0, NULL, 0, \
+ \
+ /* target_index, used_by_bfd, constructor_chain, owner, */ \
+ 0, NULL, NULL, NULL, \
+ \
+ /* symbol, symbol_ptr_ptr, */ \
+ (struct bfd_symbol *) SYM, &SEC.symbol, \
+ \
+ /* map_head, map_tail */ \
+ { NULL }, { NULL } \
+ }
void bfd_section_list_clear (bfd *);
asection *bfd_make_section_old_way (bfd *abfd, const char *name);
+asection *bfd_make_section_anyway_with_flags
+ (bfd *abfd, const char *name, flagword flags);
+
asection *bfd_make_section_anyway (bfd *abfd, const char *name);
+asection *bfd_make_section_with_flags
+ (bfd *, const char *name, flagword flags);
+
asection *bfd_make_section (bfd *, const char *name);
bfd_boolean bfd_set_section_flags
#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
BFD_SEND (obfd, _bfd_copy_private_section_data, \
(ibfd, isection, obfd, osection))
-void _bfd_strip_section_from_output
- (struct bfd_link_info *info, asection *section);
-
bfd_boolean bfd_generic_is_group_section (bfd *, const asection *sec);
bfd_boolean bfd_generic_discard_group (bfd *abfd, asection *group);
#define bfd_mach_m68040 6
#define bfd_mach_m68060 7
#define bfd_mach_cpu32 8
-#define bfd_mach_mcf5200 9
-#define bfd_mach_mcf5206e 10
-#define bfd_mach_mcf5307 11
-#define bfd_mach_mcf5407 12
-#define bfd_mach_mcf528x 13
-#define bfd_mach_mcfv4e 14
-#define bfd_mach_mcf521x 15
-#define bfd_mach_mcf5249 16
-#define bfd_mach_mcf547x 17
-#define bfd_mach_mcf548x 18
+#define bfd_mach_fido 9
+#define bfd_mach_mcf_isa_a_nodiv 10
+#define bfd_mach_mcf_isa_a 11
+#define bfd_mach_mcf_isa_a_mac 12
+#define bfd_mach_mcf_isa_a_emac 13
+#define bfd_mach_mcf_isa_aplus 14
+#define bfd_mach_mcf_isa_aplus_mac 15
+#define bfd_mach_mcf_isa_aplus_emac 16
+#define bfd_mach_mcf_isa_b_nousp 17
+#define bfd_mach_mcf_isa_b_nousp_mac 18
+#define bfd_mach_mcf_isa_b_nousp_emac 19
+#define bfd_mach_mcf_isa_b 20
+#define bfd_mach_mcf_isa_b_mac 21
+#define bfd_mach_mcf_isa_b_emac 22
+#define bfd_mach_mcf_isa_b_float 23
+#define bfd_mach_mcf_isa_b_float_mac 24
+#define bfd_mach_mcf_isa_b_float_emac 25
+#define bfd_mach_mcf_isa_c 26
+#define bfd_mach_mcf_isa_c_mac 27
+#define bfd_mach_mcf_isa_c_emac 28
+#define bfd_mach_mcf_isa_c_nodiv 29
+#define bfd_mach_mcf_isa_c_nodiv_mac 30
+#define bfd_mach_mcf_isa_c_nodiv_emac 31
bfd_arch_vax, /* DEC Vax */
bfd_arch_i960, /* Intel 960 */
/* The order of the following is important.
bfd_arch_or32, /* OpenRISC 32 */
- bfd_arch_a29k, /* AMD 29000 */
bfd_arch_sparc, /* SPARC */
#define bfd_mach_sparc 1
/* The difference between v8plus and v9 is that v9 is a true 64 bit env. */
/* Nonzero if MACH is a 64 bit sparc architecture. */
#define bfd_mach_sparc_64bit_p(mach) \
((mach) >= bfd_mach_sparc_v9 && (mach) != bfd_mach_sparc_v8plusb)
+ bfd_arch_spu, /* PowerPC SPU */
+#define bfd_mach_spu 256
bfd_arch_mips, /* MIPS Rxxxx */
#define bfd_mach_mips3000 3000
#define bfd_mach_mips3900 3900
#define bfd_mach_mips12000 12000
#define bfd_mach_mips16 16
#define bfd_mach_mips5 5
+#define bfd_mach_mips_loongson_2e 3001
+#define bfd_mach_mips_loongson_2f 3002
#define bfd_mach_mips_sb1 12310201 /* octal 'SB', 01 */
#define bfd_mach_mipsisa32 32
#define bfd_mach_mipsisa32r2 33
bfd_arch_i860, /* Intel 860 */
bfd_arch_i370, /* IBM 360/370 Mainframes */
bfd_arch_romp, /* IBM ROMP PC/RT */
- bfd_arch_alliant, /* Alliant */
bfd_arch_convex, /* Convex */
bfd_arch_m88k, /* Motorola 88xxx */
bfd_arch_m98k, /* Motorola 98xxx */
#define bfd_mach_arm_XScale 10
#define bfd_mach_arm_ep9312 11
#define bfd_mach_arm_iWMMXt 12
+#define bfd_mach_arm_iWMMXt2 13
bfd_arch_ns32k, /* National Semiconductors ns32000 */
bfd_arch_w65, /* WDC 65816 */
bfd_arch_tic30, /* Texas Instruments TMS320C30 */
#define bfd_mach_arc_6 6
#define bfd_mach_arc_7 7
#define bfd_mach_arc_8 8
+ bfd_arch_m32c, /* Renesas M16C/M32C. */
+#define bfd_mach_m16c 0x75
+#define bfd_mach_m32c 0x78
bfd_arch_m32r, /* Renesas M32R (formerly Mitsubishi M32R/D) */
#define bfd_mach_m32r 1 /* For backwards compatibility. */
#define bfd_mach_m32rx 'x'
#define bfd_mach_fr500 500
#define bfd_mach_fr550 550
bfd_arch_mcore,
+ bfd_arch_mep,
+#define bfd_mach_mep 1
+#define bfd_mach_mep_h1 0x6831
bfd_arch_ia64, /* HP/Intel ia64 */
#define bfd_mach_ia64_elf64 64
#define bfd_mach_ia64_elf32 32
bfd_arch_iq2000, /* Vitesse IQ2000. */
#define bfd_mach_iq2000 1
#define bfd_mach_iq10 2
+ bfd_arch_mt,
+#define bfd_mach_ms1 1
+#define bfd_mach_mrisc2 2
+#define bfd_mach_ms2 3
bfd_arch_pj,
bfd_arch_avr, /* Atmel AVR microcontrollers. */
#define bfd_mach_avr1 1
#define bfd_mach_avr3 3
#define bfd_mach_avr4 4
#define bfd_mach_avr5 5
+#define bfd_mach_avr6 6
+ bfd_arch_bfin, /* ADI Blackfin */
+#define bfd_mach_bfin 1
+ bfd_arch_cr16, /* National Semiconductor CompactRISC (ie CR16). */
+#define bfd_mach_cr16 1
bfd_arch_cr16c, /* National Semiconductor CompactRISC. */
#define bfd_mach_cr16c 1
bfd_arch_crx, /* National Semiconductor CRX. */
bfd_arch_s390, /* IBM s390 */
#define bfd_mach_s390_31 31
#define bfd_mach_s390_64 64
+ bfd_arch_score, /* Sunplus score */
bfd_arch_openrisc, /* OpenRISC */
bfd_arch_mmix, /* Donald Knuth's educational processor. */
bfd_arch_xstormy16,
#define bfd_mach_msp13 13
#define bfd_mach_msp14 14
#define bfd_mach_msp15 15
-#define bfd_mach_msp16 16
+#define bfd_mach_msp16 16
+#define bfd_mach_msp21 21
#define bfd_mach_msp31 31
#define bfd_mach_msp32 32
#define bfd_mach_msp33 33
#define bfd_mach_msp42 42
#define bfd_mach_msp43 43
#define bfd_mach_msp44 44
+ bfd_arch_xc16x, /* Infineon's XC16X Series. */
+#define bfd_mach_xc16x 1
+#define bfd_mach_xc16xl 2
+#define bfd_mach_xc16xs 3
bfd_arch_xtensa, /* Tensilica's Xtensa cores. */
#define bfd_mach_xtensa 1
bfd_arch_maxq, /* Dallas MAXQ 10/20 */
#define bfd_mach_maxq10 10
#define bfd_mach_maxq20 20
+ bfd_arch_z80,
+#define bfd_mach_z80strict 1 /* No undocumented opcodes. */
+#define bfd_mach_z80 3 /* With ixl, ixh, iyl, and iyh. */
+#define bfd_mach_z80full 7 /* All undocumented instructions. */
+#define bfd_mach_r800 11 /* R800: successor with multiplication. */
bfd_arch_last
};
/* Do not complain on overflow. */
complain_overflow_dont,
- /* Complain if the bitfield overflows, whether it is considered
- as signed or unsigned. */
+ /* Complain if the value overflows when considered as a signed
+ number one bit larger than the field. ie. A bitfield of N bits
+ is allowed to represent -2**n to 2**n-1. */
complain_overflow_bitfield,
- /* Complain if the value overflows when considered as signed
+ /* Complain if the value overflows when considered as a signed
number. */
complain_overflow_signed,
BFD_RELOC_SPARC_TLS_TPOFF32,
BFD_RELOC_SPARC_TLS_TPOFF64,
+/* SPU Relocations. */
+ BFD_RELOC_SPU_IMM7,
+ BFD_RELOC_SPU_IMM8,
+ BFD_RELOC_SPU_IMM10,
+ BFD_RELOC_SPU_IMM10W,
+ BFD_RELOC_SPU_IMM16,
+ BFD_RELOC_SPU_IMM16W,
+ BFD_RELOC_SPU_IMM18,
+ BFD_RELOC_SPU_PCREL9a,
+ BFD_RELOC_SPU_PCREL9b,
+ BFD_RELOC_SPU_PCREL16,
+ BFD_RELOC_SPU_LO16,
+ BFD_RELOC_SPU_HI16,
+ BFD_RELOC_SPU_PPU32,
+ BFD_RELOC_SPU_PPU64,
+
/* Alpha ECOFF and ELF relocations. Some of these treat the symbol or
"addend" in some special way.
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
/* Low 16 bits. */
BFD_RELOC_LO16,
+/* High 16 bits of 32-bit pc-relative value */
+ BFD_RELOC_HI16_PCREL,
+
+/* High 16 bits of 32-bit pc-relative value, adjusted */
+ BFD_RELOC_HI16_S_PCREL,
+
+/* Low 16 bits of pc-relative value */
+ BFD_RELOC_LO16_PCREL,
+
/* MIPS16 high 16 bits of 32-bit value. */
BFD_RELOC_MIPS16_HI16,
BFD_RELOC_MIPS_REL16,
BFD_RELOC_MIPS_RELGOT,
BFD_RELOC_MIPS_JALR,
+ BFD_RELOC_MIPS_TLS_DTPMOD32,
+ BFD_RELOC_MIPS_TLS_DTPREL32,
+ BFD_RELOC_MIPS_TLS_DTPMOD64,
+ BFD_RELOC_MIPS_TLS_DTPREL64,
+ BFD_RELOC_MIPS_TLS_GD,
+ BFD_RELOC_MIPS_TLS_LDM,
+ BFD_RELOC_MIPS_TLS_DTPREL_HI16,
+ BFD_RELOC_MIPS_TLS_DTPREL_LO16,
+ BFD_RELOC_MIPS_TLS_GOTTPREL,
+ BFD_RELOC_MIPS_TLS_TPREL32,
+ BFD_RELOC_MIPS_TLS_TPREL64,
+ BFD_RELOC_MIPS_TLS_TPREL_HI16,
+ BFD_RELOC_MIPS_TLS_TPREL_LO16,
+
+
+/* MIPS ELF relocations (VxWorks extensions). */
+ BFD_RELOC_MIPS_COPY,
+ BFD_RELOC_MIPS_JUMP_SLOT,
/* Fujitsu Frv Relocations. */
/* Adjust by program base. */
BFD_RELOC_MN10300_RELATIVE,
+/* Together with another reloc targeted at the same location,
+allows for a value that is the difference of two symbols
+in the same section. */
+ BFD_RELOC_MN10300_SYM_DIFF,
+
+/* The addend of this reloc is an alignment power that must
+be honoured at the offset's location, regardless of linker
+relaxation. */
+ BFD_RELOC_MN10300_ALIGN,
+
/* i386/elf relocations */
BFD_RELOC_386_GOT32,
BFD_RELOC_386_TLS_DTPMOD32,
BFD_RELOC_386_TLS_DTPOFF32,
BFD_RELOC_386_TLS_TPOFF32,
+ BFD_RELOC_386_TLS_GOTDESC,
+ BFD_RELOC_386_TLS_DESC_CALL,
+ BFD_RELOC_386_TLS_DESC,
/* x86-64/elf relocations */
BFD_RELOC_X86_64_GOT32,
BFD_RELOC_X86_64_DTPOFF32,
BFD_RELOC_X86_64_GOTTPOFF,
BFD_RELOC_X86_64_TPOFF32,
+ BFD_RELOC_X86_64_GOTOFF64,
+ BFD_RELOC_X86_64_GOTPC32,
+ BFD_RELOC_X86_64_GOT64,
+ BFD_RELOC_X86_64_GOTPCREL64,
+ BFD_RELOC_X86_64_GOTPC64,
+ BFD_RELOC_X86_64_GOTPLT64,
+ BFD_RELOC_X86_64_PLTOFF64,
+ BFD_RELOC_X86_64_GOTPC32_TLSDESC,
+ BFD_RELOC_X86_64_TLSDESC_CALL,
+ BFD_RELOC_X86_64_TLSDESC,
/* ns32k relocations */
BFD_RELOC_NS32K_IMM_8,
field in the instruction. */
BFD_RELOC_THUMB_PCREL_BLX,
-/* These relocs are only used within the ARM assembler. They are not
-(at present) written to any object files. */
- BFD_RELOC_ARM_IMMEDIATE,
- BFD_RELOC_ARM_ADRL_IMMEDIATE,
+/* ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction. */
+ BFD_RELOC_ARM_PCREL_CALL,
+
+/* ARM 26-bit pc-relative branch for B or conditional BL instruction. */
+ BFD_RELOC_ARM_PCREL_JUMP,
+
+/* Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
+The lowest bit must be zero and is not stored in the instruction.
+Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
+"nn" one smaller in all cases. Note further that BRANCH23
+corresponds to R_ARM_THM_CALL. */
+ BFD_RELOC_THUMB_PCREL_BRANCH7,
+ BFD_RELOC_THUMB_PCREL_BRANCH9,
+ BFD_RELOC_THUMB_PCREL_BRANCH12,
+ BFD_RELOC_THUMB_PCREL_BRANCH20,
+ BFD_RELOC_THUMB_PCREL_BRANCH23,
+ BFD_RELOC_THUMB_PCREL_BRANCH25,
+
+/* 12-bit immediate offset, used in ARM-format ldr and str instructions. */
BFD_RELOC_ARM_OFFSET_IMM,
- BFD_RELOC_ARM_SHIFT_IMM,
- BFD_RELOC_ARM_SMI,
- BFD_RELOC_ARM_SWI,
- BFD_RELOC_ARM_MULTI,
- BFD_RELOC_ARM_CP_OFF_IMM,
- BFD_RELOC_ARM_CP_OFF_IMM_S2,
- BFD_RELOC_ARM_ADR_IMM,
- BFD_RELOC_ARM_LDR_IMM,
- BFD_RELOC_ARM_LITERAL,
- BFD_RELOC_ARM_IN_POOL,
- BFD_RELOC_ARM_OFFSET_IMM8,
- BFD_RELOC_ARM_HWLITERAL,
- BFD_RELOC_ARM_THUMB_ADD,
- BFD_RELOC_ARM_THUMB_IMM,
- BFD_RELOC_ARM_THUMB_SHIFT,
+
+/* 5-bit immediate offset, used in Thumb-format ldr and str instructions. */
BFD_RELOC_ARM_THUMB_OFFSET,
- BFD_RELOC_ARM_GOT12,
- BFD_RELOC_ARM_GOT32,
- BFD_RELOC_ARM_JUMP_SLOT,
- BFD_RELOC_ARM_COPY,
- BFD_RELOC_ARM_GLOB_DAT,
- BFD_RELOC_ARM_PLT32,
- BFD_RELOC_ARM_RELATIVE,
- BFD_RELOC_ARM_GOTOFF,
- BFD_RELOC_ARM_GOTPC,
/* Pc-relative or absolute relocation depending on target. Used for
entries in .init_array sections. */
/* Data segment base relative address. */
BFD_RELOC_ARM_SBREL32,
-/* This reloc is used for References to RTTI dta from exception handling
+/* This reloc is used for references to RTTI data from exception handling
tables. The actual definition depends on the target. It may be a
pc-relative or some form of GOT-indirect relocation. */
BFD_RELOC_ARM_TARGET2,
/* 31-bit PC relative address. */
BFD_RELOC_ARM_PREL31,
+/* Low and High halfword relocations for MOVW and MOVT instructions. */
+ BFD_RELOC_ARM_MOVW,
+ BFD_RELOC_ARM_MOVT,
+ BFD_RELOC_ARM_MOVW_PCREL,
+ BFD_RELOC_ARM_MOVT_PCREL,
+ BFD_RELOC_ARM_THUMB_MOVW,
+ BFD_RELOC_ARM_THUMB_MOVT,
+ BFD_RELOC_ARM_THUMB_MOVW_PCREL,
+ BFD_RELOC_ARM_THUMB_MOVT_PCREL,
+
+/* Relocations for setting up GOTs and PLTs for shared libraries. */
+ BFD_RELOC_ARM_JUMP_SLOT,
+ BFD_RELOC_ARM_GLOB_DAT,
+ BFD_RELOC_ARM_GOT32,
+ BFD_RELOC_ARM_PLT32,
+ BFD_RELOC_ARM_RELATIVE,
+ BFD_RELOC_ARM_GOTOFF,
+ BFD_RELOC_ARM_GOTPC,
+
+/* ARM thread-local storage relocations. */
+ BFD_RELOC_ARM_TLS_GD32,
+ BFD_RELOC_ARM_TLS_LDO32,
+ BFD_RELOC_ARM_TLS_LDM32,
+ BFD_RELOC_ARM_TLS_DTPOFF32,
+ BFD_RELOC_ARM_TLS_DTPMOD32,
+ BFD_RELOC_ARM_TLS_TPOFF32,
+ BFD_RELOC_ARM_TLS_IE32,
+ BFD_RELOC_ARM_TLS_LE32,
+
+/* ARM group relocations. */
+ BFD_RELOC_ARM_ALU_PC_G0_NC,
+ BFD_RELOC_ARM_ALU_PC_G0,
+ BFD_RELOC_ARM_ALU_PC_G1_NC,
+ BFD_RELOC_ARM_ALU_PC_G1,
+ BFD_RELOC_ARM_ALU_PC_G2,
+ BFD_RELOC_ARM_LDR_PC_G0,
+ BFD_RELOC_ARM_LDR_PC_G1,
+ BFD_RELOC_ARM_LDR_PC_G2,
+ BFD_RELOC_ARM_LDRS_PC_G0,
+ BFD_RELOC_ARM_LDRS_PC_G1,
+ BFD_RELOC_ARM_LDRS_PC_G2,
+ BFD_RELOC_ARM_LDC_PC_G0,
+ BFD_RELOC_ARM_LDC_PC_G1,
+ BFD_RELOC_ARM_LDC_PC_G2,
+ BFD_RELOC_ARM_ALU_SB_G0_NC,
+ BFD_RELOC_ARM_ALU_SB_G0,
+ BFD_RELOC_ARM_ALU_SB_G1_NC,
+ BFD_RELOC_ARM_ALU_SB_G1,
+ BFD_RELOC_ARM_ALU_SB_G2,
+ BFD_RELOC_ARM_LDR_SB_G0,
+ BFD_RELOC_ARM_LDR_SB_G1,
+ BFD_RELOC_ARM_LDR_SB_G2,
+ BFD_RELOC_ARM_LDRS_SB_G0,
+ BFD_RELOC_ARM_LDRS_SB_G1,
+ BFD_RELOC_ARM_LDRS_SB_G2,
+ BFD_RELOC_ARM_LDC_SB_G0,
+ BFD_RELOC_ARM_LDC_SB_G1,
+ BFD_RELOC_ARM_LDC_SB_G2,
+
+/* These relocs are only used within the ARM assembler. They are not
+(at present) written to any object files. */
+ BFD_RELOC_ARM_IMMEDIATE,
+ BFD_RELOC_ARM_ADRL_IMMEDIATE,
+ BFD_RELOC_ARM_T32_IMMEDIATE,
+ BFD_RELOC_ARM_T32_ADD_IMM,
+ BFD_RELOC_ARM_T32_IMM12,
+ BFD_RELOC_ARM_T32_ADD_PC12,
+ BFD_RELOC_ARM_SHIFT_IMM,
+ BFD_RELOC_ARM_SMC,
+ BFD_RELOC_ARM_SWI,
+ BFD_RELOC_ARM_MULTI,
+ BFD_RELOC_ARM_CP_OFF_IMM,
+ BFD_RELOC_ARM_CP_OFF_IMM_S2,
+ BFD_RELOC_ARM_T32_CP_OFF_IMM,
+ BFD_RELOC_ARM_T32_CP_OFF_IMM_S2,
+ BFD_RELOC_ARM_ADR_IMM,
+ BFD_RELOC_ARM_LDR_IMM,
+ BFD_RELOC_ARM_LITERAL,
+ BFD_RELOC_ARM_IN_POOL,
+ BFD_RELOC_ARM_OFFSET_IMM8,
+ BFD_RELOC_ARM_T32_OFFSET_U8,
+ BFD_RELOC_ARM_T32_OFFSET_IMM,
+ BFD_RELOC_ARM_HWLITERAL,
+ BFD_RELOC_ARM_THUMB_ADD,
+ BFD_RELOC_ARM_THUMB_IMM,
+ BFD_RELOC_ARM_THUMB_SHIFT,
+
/* Renesas / SuperH SH relocs. Not all of these appear in object files. */
BFD_RELOC_SH_PCDISP8BY2,
BFD_RELOC_SH_PCDISP12BY2,
BFD_RELOC_SH_TLS_DTPOFF32,
BFD_RELOC_SH_TLS_TPOFF32,
-/* Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
-be zero and is not stored in the instruction. */
- BFD_RELOC_THUMB_PCREL_BRANCH9,
- BFD_RELOC_THUMB_PCREL_BRANCH12,
- BFD_RELOC_THUMB_PCREL_BRANCH23,
-
/* ARC Cores relocs.
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
not stored in the instruction. The high 20 bits are installed in bits 26
through 0. */
BFD_RELOC_ARC_B26,
+/* ADI Blackfin 16 bit immediate absolute reloc. */
+ BFD_RELOC_BFIN_16_IMM,
+
+/* ADI Blackfin 16 bit immediate absolute reloc higher 16 bits. */
+ BFD_RELOC_BFIN_16_HIGH,
+
+/* ADI Blackfin 'a' part of LSETUP. */
+ BFD_RELOC_BFIN_4_PCREL,
+
+/* ADI Blackfin. */
+ BFD_RELOC_BFIN_5_PCREL,
+
+/* ADI Blackfin 16 bit immediate absolute reloc lower 16 bits. */
+ BFD_RELOC_BFIN_16_LOW,
+
+/* ADI Blackfin. */
+ BFD_RELOC_BFIN_10_PCREL,
+
+/* ADI Blackfin 'b' part of LSETUP. */
+ BFD_RELOC_BFIN_11_PCREL,
+
+/* ADI Blackfin. */
+ BFD_RELOC_BFIN_12_PCREL_JUMP,
+
+/* ADI Blackfin Short jump, pcrel. */
+ BFD_RELOC_BFIN_12_PCREL_JUMP_S,
+
+/* ADI Blackfin Call.x not implemented. */
+ BFD_RELOC_BFIN_24_PCREL_CALL_X,
+
+/* ADI Blackfin Long Jump pcrel. */
+ BFD_RELOC_BFIN_24_PCREL_JUMP_L,
+
+/* ADI Blackfin FD-PIC relocations. */
+ BFD_RELOC_BFIN_GOT17M4,
+ BFD_RELOC_BFIN_GOTHI,
+ BFD_RELOC_BFIN_GOTLO,
+ BFD_RELOC_BFIN_FUNCDESC,
+ BFD_RELOC_BFIN_FUNCDESC_GOT17M4,
+ BFD_RELOC_BFIN_FUNCDESC_GOTHI,
+ BFD_RELOC_BFIN_FUNCDESC_GOTLO,
+ BFD_RELOC_BFIN_FUNCDESC_VALUE,
+ BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4,
+ BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI,
+ BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO,
+ BFD_RELOC_BFIN_GOTOFF17M4,
+ BFD_RELOC_BFIN_GOTOFFHI,
+ BFD_RELOC_BFIN_GOTOFFLO,
+
+/* ADI Blackfin GOT relocation. */
+ BFD_RELOC_BFIN_GOT,
+
+/* ADI Blackfin PLTPC relocation. */
+ BFD_RELOC_BFIN_PLTPC,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_PUSH,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_CONST,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_ADD,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_SUB,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_MULT,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_DIV,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_MOD,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_LSHIFT,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_RSHIFT,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_AND,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_OR,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_XOR,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_LAND,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_LOR,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_LEN,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_NEG,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_COMP,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_PAGE,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_HWPAGE,
+
+/* ADI Blackfin arithmetic relocation. */
+ BFD_ARELOC_BFIN_ADDR,
+
/* Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0. */
/* DLX relocs */
BFD_RELOC_DLX_JMP26,
+/* Renesas M16C/M32C Relocations. */
+ BFD_RELOC_M32C_HI8,
+ BFD_RELOC_M32C_RL_JUMP,
+ BFD_RELOC_M32C_RL_1ADDR,
+ BFD_RELOC_M32C_RL_2ADDR,
+
/* Renesas M32R (formerly Mitsubishi M32R) relocs.
This is a 24 bit absolute address. */
BFD_RELOC_M32R_24,
BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2,
BFD_RELOC_MCORE_RVA,
+/* Toshiba Media Processor Relocations. */
+ BFD_RELOC_MEP_8,
+ BFD_RELOC_MEP_16,
+ BFD_RELOC_MEP_32,
+ BFD_RELOC_MEP_PCREL8A2,
+ BFD_RELOC_MEP_PCREL12A2,
+ BFD_RELOC_MEP_PCREL17A2,
+ BFD_RELOC_MEP_PCREL24A2,
+ BFD_RELOC_MEP_PCABS24A2,
+ BFD_RELOC_MEP_LOW16,
+ BFD_RELOC_MEP_HI16U,
+ BFD_RELOC_MEP_HI16S,
+ BFD_RELOC_MEP_GPREL,
+ BFD_RELOC_MEP_TPREL,
+ BFD_RELOC_MEP_TPREL7,
+ BFD_RELOC_MEP_TPREL7A2,
+ BFD_RELOC_MEP_TPREL7A4,
+ BFD_RELOC_MEP_UIMM24,
+ BFD_RELOC_MEP_ADDR24A4,
+ BFD_RELOC_MEP_GNU_VTINHERIT,
+ BFD_RELOC_MEP_GNU_VTENTRY,
+
+
/* These are relocations for the GETA instruction. */
BFD_RELOC_MMIX_GETA,
BFD_RELOC_MMIX_GETA_1,
of program memory address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HH8_LDI,
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
+of 32 bit value) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_MS8_LDI,
+
/* This is a 16 bit reloc for the AVR that stores negated 8 bit value
(usually data memory address) into 8 bit immediate value of SUBI insn. */
BFD_RELOC_AVR_LO8_LDI_NEG,
of LDI or SUBI insn. */
BFD_RELOC_AVR_HH8_LDI_NEG,
+/* This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
+of 32 bit value) into 8 bit immediate value of LDI insn. */
+ BFD_RELOC_AVR_MS8_LDI_NEG,
+
/* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
command address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_LO8_LDI_PM,
+/* This is a 16 bit reloc for the AVR that stores 8 bit value
+(command address) into 8 bit immediate value of LDI insn. If the address
+is beyond the 128k boundary, the linker inserts a jump stub for this reloc
+in the lower 128k. */
+ BFD_RELOC_AVR_LO8_LDI_GS,
+
/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
of command address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HI8_LDI_PM,
+/* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
+of command address) into 8 bit immediate value of LDI insn. If the address
+is beyond the 128k boundary, the linker inserts a jump stub for this reloc
+below 128k. */
+ BFD_RELOC_AVR_HI8_LDI_GS,
+
/* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
of command address) into 8 bit immediate value of LDI insn. */
BFD_RELOC_AVR_HH8_LDI_PM,
BFD_RELOC_390_GOTPLT20,
BFD_RELOC_390_TLS_GOTIE20,
+/* Score relocations */
+ BFD_RELOC_SCORE_DUMMY1,
+
+/* Low 16 bit for load/store */
+ BFD_RELOC_SCORE_GPREL15,
+
+/* This is a 24-bit reloc with the right 1 bit assumed to be 0 */
+ BFD_RELOC_SCORE_DUMMY2,
+ BFD_RELOC_SCORE_JMP,
+
+/* This is a 19-bit reloc with the right 1 bit assumed to be 0 */
+ BFD_RELOC_SCORE_BRANCH,
+
+/* This is a 11-bit reloc with the right 1 bit assumed to be 0 */
+ BFD_RELOC_SCORE16_JMP,
+
+/* This is a 8-bit reloc with the right 1 bit assumed to be 0 */
+ BFD_RELOC_SCORE16_BRANCH,
+
+/* Undocumented Score relocs */
+ BFD_RELOC_SCORE_GOT15,
+ BFD_RELOC_SCORE_GOT_LO16,
+ BFD_RELOC_SCORE_CALL15,
+ BFD_RELOC_SCORE_DUMMY_HI16,
+
/* Scenix IP2K - 9-bit register number / data address */
BFD_RELOC_IP2K_FR9,
BFD_RELOC_16C_IMM32,
BFD_RELOC_16C_IMM32_C,
+/* NS CR16 Relocations. */
+ BFD_RELOC_CR16_NUM8,
+ BFD_RELOC_CR16_NUM16,
+ BFD_RELOC_CR16_NUM32,
+ BFD_RELOC_CR16_NUM32a,
+ BFD_RELOC_CR16_REGREL0,
+ BFD_RELOC_CR16_REGREL4,
+ BFD_RELOC_CR16_REGREL4a,
+ BFD_RELOC_CR16_REGREL14,
+ BFD_RELOC_CR16_REGREL14a,
+ BFD_RELOC_CR16_REGREL16,
+ BFD_RELOC_CR16_REGREL20,
+ BFD_RELOC_CR16_REGREL20a,
+ BFD_RELOC_CR16_ABS20,
+ BFD_RELOC_CR16_ABS24,
+ BFD_RELOC_CR16_IMM4,
+ BFD_RELOC_CR16_IMM8,
+ BFD_RELOC_CR16_IMM16,
+ BFD_RELOC_CR16_IMM20,
+ BFD_RELOC_CR16_IMM24,
+ BFD_RELOC_CR16_IMM32,
+ BFD_RELOC_CR16_IMM32a,
+ BFD_RELOC_CR16_DISP4,
+ BFD_RELOC_CR16_DISP8,
+ BFD_RELOC_CR16_DISP16,
+ BFD_RELOC_CR16_DISP20,
+ BFD_RELOC_CR16_DISP24,
+ BFD_RELOC_CR16_DISP24a,
+ BFD_RELOC_CR16_SWITCH8,
+ BFD_RELOC_CR16_SWITCH16,
+ BFD_RELOC_CR16_SWITCH32,
+
/* NS CRX Relocations. */
BFD_RELOC_CRX_REL4,
BFD_RELOC_CRX_REL8,
BFD_RELOC_XSTORMY16_24,
BFD_RELOC_XSTORMY16_FPTR16,
+/* Self-describing complex relocations. */
+ BFD_RELOC_RELC,
+
+
+/* Infineon Relocations. */
+ BFD_RELOC_XC16X_PAG,
+ BFD_RELOC_XC16X_POF,
+ BFD_RELOC_XC16X_SEG,
+ BFD_RELOC_XC16X_SOF,
+
/* Relocations used by VAX ELF. */
BFD_RELOC_VAX_GLOB_DAT,
BFD_RELOC_VAX_JMP_SLOT,
BFD_RELOC_VAX_RELATIVE,
+/* Morpho MT - 16 bit immediate relocation. */
+ BFD_RELOC_MT_PC16,
+
+/* Morpho MT - Hi 16 bits of an address. */
+ BFD_RELOC_MT_HI16,
+
+/* Morpho MT - Low 16 bits of an address. */
+ BFD_RELOC_MT_LO16,
+
+/* Morpho MT - Used to tell the linker which vtable entries are used. */
+ BFD_RELOC_MT_GNU_VTINHERIT,
+
+/* Morpho MT - Used to tell the linker which vtable entries are used. */
+ BFD_RELOC_MT_GNU_VTENTRY,
+
+/* Morpho MT - 8 bit immediate relocation. */
+ BFD_RELOC_MT_PCINSN8,
+
/* msp430 specific relocation codes */
BFD_RELOC_MSP430_10_PCREL,
BFD_RELOC_MSP430_16_PCREL,
BFD_RELOC_XTENSA_OP1,
BFD_RELOC_XTENSA_OP2,
-/* Xtensa relocation to mark that the assembler expanded the
+/* Xtensa relocation to mark that the assembler expanded the
instructions from an original target. The expansion size is
encoded in the reloc size. */
BFD_RELOC_XTENSA_ASM_EXPAND,
-/* Xtensa relocation to mark that the linker should simplify
-assembler-expanded instructions. This is commonly used
-internally by the linker after analysis of a
+/* Xtensa relocation to mark that the linker should simplify
+assembler-expanded instructions. This is commonly used
+internally by the linker after analysis of a
BFD_RELOC_XTENSA_ASM_EXPAND. */
BFD_RELOC_XTENSA_ASM_SIMPLIFY,
+
+/* 8 bit signed offset in (ix+d) or (iy+d). */
+ BFD_RELOC_Z80_DISP8,
+
+/* DJNZ offset. */
+ BFD_RELOC_Z8K_DISP7,
+
+/* CALR offset. */
+ BFD_RELOC_Z8K_CALLR,
+
+/* 4 bit value. */
+ BFD_RELOC_Z8K_IMM4L,
BFD_RELOC_UNUSED };
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
reloc_howto_type *bfd_reloc_type_lookup
(bfd *abfd, bfd_reloc_code_real_type code);
+reloc_howto_type *bfd_reloc_name_lookup
+ (bfd *abfd, const char *reloc_name);
const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
/* This symbol is thread local. Used in ELF. */
#define BSF_THREAD_LOCAL 0x40000
+ /* This symbol represents a complex relocation expression,
+ with the expression tree serialized in the symbol name. */
+#define BSF_RELC 0x80000
+
+ /* This symbol represents a signed complex relocation expression,
+ with the expression tree serialized in the symbol name. */
+#define BSF_SRELC 0x100000
+
flagword flags;
/* A pointer to the section to which this symbol is
/* Pointer to linked list of sections. */
struct bfd_section *sections;
- /* The place where we add to the section list. */
- struct bfd_section **section_tail;
+ /* The last section on the section list. */
+ struct bfd_section *section_last;
/* The number of sections. */
unsigned int section_count;
/* Stuff only useful for archives. */
void *arelt_data;
struct bfd *my_archive; /* The containing archive BFD. */
- struct bfd *next; /* The next BFD in the archive. */
+ struct bfd *archive_next; /* The next BFD in the archive. */
struct bfd *archive_head; /* The first BFD in the archive. */
bfd_boolean has_armap;
bfd_error_bad_value,
bfd_error_file_truncated,
bfd_error_file_too_big,
+ bfd_error_on_input,
bfd_error_invalid_error_code
}
bfd_error_type;
bfd_error_type bfd_get_error (void);
-void bfd_set_error (bfd_error_type error_tag);
+void bfd_set_error (bfd_error_type error_tag, ...);
const char *bfd_errmsg (bfd_error_type error_tag);
#define bfd_set_private_flags(abfd, flags) \
BFD_SEND (abfd, _bfd_set_private_flags, (abfd, flags))
-#define bfd_sizeof_headers(abfd, reloc) \
- BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
+#define bfd_sizeof_headers(abfd, info) \
+ BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, info))
#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
BFD_SEND (abfd, _bfd_find_nearest_line, \
(abfd, sec, syms, off, file, func, line))
+#define bfd_find_line(abfd, syms, sym, file, line) \
+ BFD_SEND (abfd, _bfd_find_line, \
+ (abfd, syms, sym, file, line))
+
+#define bfd_find_inliner_info(abfd, file, func, line) \
+ BFD_SEND (abfd, _bfd_find_inliner_info, \
+ (abfd, file, func, line))
+
#define bfd_debug_info_start(abfd) \
BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
flagword flags;
const struct bfd_arch_info *arch_info;
struct bfd_section *sections;
- struct bfd_section **section_tail;
+ struct bfd_section *section_last;
unsigned int section_count;
struct bfd_hash_table section_htab;
};
void bfd_preserve_finish (bfd *, struct bfd_preserve *);
+bfd_vma bfd_emul_get_maxpagesize (const char *);
+
+void bfd_emul_set_maxpagesize (const char *, bfd_vma);
+
+bfd_vma bfd_emul_get_commonpagesize (const char *);
+
+void bfd_emul_set_commonpagesize (const char *, bfd_vma);
+
+char *bfd_demangle (bfd *, const char *, int);
+
/* Extracted from archive.c. */
symindex bfd_get_next_mapent
(bfd *abfd, symindex previous, carsym **sym);
bfd_boolean core_file_matches_executable_p
(bfd *core_bfd, bfd *exec_bfd);
+bfd_boolean generic_core_file_matches_executable_p
+ (bfd *core_bfd, bfd *exec_bfd);
+
/* Extracted from targets.c. */
#define BFD_SEND(bfd, message, arglist) \
((*((bfd)->xvec->message)) arglist)
unsigned short ar_max_namelen;
/* Entries for byte swapping for data. These are different from the
- other entry points, since they don't take a BFD asthe first argument.
+ other entry points, since they don't take a BFD as the first argument.
Certain other handlers could do the same. */
bfd_uint64_t (*bfd_getx64) (const void *);
bfd_int64_t (*bfd_getx_signed_64) (const void *);
#define BFD_JUMP_TABLE_COPY(NAME) \
NAME##_bfd_copy_private_bfd_data, \
NAME##_bfd_merge_private_bfd_data, \
+ _bfd_generic_init_private_section_data, \
NAME##_bfd_copy_private_section_data, \
NAME##_bfd_copy_private_symbol_data, \
NAME##_bfd_copy_private_header_data, \
/* Called to merge BFD general private data from one object file
to a common output file when linking. */
bfd_boolean (*_bfd_merge_private_bfd_data) (bfd *, bfd *);
+ /* Called to initialize BFD private section data from one object file
+ to another. */
+#define bfd_init_private_section_data(ibfd, isec, obfd, osec, link_info) \
+ BFD_SEND (obfd, _bfd_init_private_section_data, (ibfd, isec, obfd, osec, link_info))
+ bfd_boolean (*_bfd_init_private_section_data)
+ (bfd *, sec_ptr, bfd *, sec_ptr, struct bfd_link_info *);
/* Called to copy BFD private section data from one object file
to another. */
bfd_boolean (*_bfd_copy_private_section_data)
NAME##_bfd_is_target_special_symbol, \
NAME##_get_lineno, \
NAME##_find_nearest_line, \
+ _bfd_generic_find_line, \
+ NAME##_find_inliner_info, \
NAME##_bfd_make_debug_symbol, \
NAME##_read_minisymbols, \
NAME##_minisymbol_to_symbol
bfd_boolean (*_bfd_find_nearest_line)
(bfd *, struct bfd_section *, struct bfd_symbol **, bfd_vma,
const char **, const char **, unsigned int *);
+ bfd_boolean (*_bfd_find_line)
+ (bfd *, struct bfd_symbol **, struct bfd_symbol *,
+ const char **, unsigned int *);
+ bfd_boolean (*_bfd_find_inliner_info)
+ (bfd *, const char **, const char **, unsigned int *);
/* Back-door to allow format-aware applications to create debug symbols
while using BFD for everything else. Currently used by the assembler
when creating COFF files. */
#define BFD_JUMP_TABLE_RELOCS(NAME) \
NAME##_get_reloc_upper_bound, \
NAME##_canonicalize_reloc, \
- NAME##_bfd_reloc_type_lookup
+ NAME##_bfd_reloc_type_lookup, \
+ NAME##_bfd_reloc_name_lookup
long (*_get_reloc_upper_bound) (bfd *, sec_ptr);
long (*_bfd_canonicalize_reloc)
/* See documentation on reloc types. */
reloc_howto_type *
(*reloc_type_lookup) (bfd *, bfd_reloc_code_real_type);
+ reloc_howto_type *
+ (*reloc_name_lookup) (bfd *, const char *);
+
/* Routines used when writing an object file. */
#define BFD_JUMP_TABLE_WRITE(NAME) \
NAME##_bfd_discard_group, \
NAME##_section_already_linked \
- int (*_bfd_sizeof_headers) (bfd *, bfd_boolean);
+ int (*_bfd_sizeof_headers) (bfd *, struct bfd_link_info *);
bfd_byte * (*_bfd_get_relocated_section_contents)
(bfd *, struct bfd_link_info *, struct bfd_link_order *,
bfd_byte *, bfd_boolean, struct bfd_symbol **);
/* Check if SEC has been already linked during a reloceatable or
final link. */
- void (*_section_already_linked) (bfd *, struct bfd_section *);
+ void (*_section_already_linked) (bfd *, struct bfd_section *,
+ struct bfd_link_info *);
/* Routines to handle dynamic symbols and relocs. */
#define BFD_JUMP_TABLE_DYNAMIC(NAME) \
#define bfd_link_split_section(abfd, sec) \
BFD_SEND (abfd, _bfd_link_split_section, (abfd, sec))
-void bfd_section_already_linked (bfd *abfd, asection *sec);
+void bfd_section_already_linked (bfd *abfd, asection *sec,
+ struct bfd_link_info *info);
-#define bfd_section_already_linked(abfd, sec) \
- BFD_SEND (abfd, _section_already_linked, (abfd, sec))
+#define bfd_section_already_linked(abfd, sec, info) \
+ BFD_SEND (abfd, _section_already_linked, (abfd, sec, info))
/* Extracted from simple.c. */
bfd_byte *bfd_simple_get_relocated_section_contents