extern struct bfd_hash_entry *bfd_hash_insert
(struct bfd_hash_table *, const char *, unsigned long);
+/* Rename an entry in a hash table. */
+extern void bfd_hash_rename
+ (struct bfd_hash_table *, const char *, struct bfd_hash_entry *);
+
/* Replace an entry in a hash table. */
extern void bfd_hash_replace
(struct bfd_hash_table *, struct bfd_hash_entry *old,
void bfd_init (void);
/* Extracted from opncls.c. */
+extern unsigned int bfd_use_reserved_id;
bfd *bfd_fopen (const char *filename, const char *target,
const char *mode, int fd);
bfd_boolean bfd_make_readable (bfd *abfd);
+void *bfd_alloc (bfd *abfd, bfd_size_type wanted);
+
+void *bfd_zalloc (bfd *abfd, bfd_size_type wanted);
+
unsigned long bfd_calc_gnu_debuglink_crc32
(unsigned long crc, const unsigned char *buf, bfd_size_type len);
/* Mark flag used by some linker backends for garbage collection. */
unsigned int gc_mark : 1;
+ /* Section compression status. */
+ unsigned int compress_status : 2;
+#define COMPRESS_SECTION_NONE 0
+#define COMPRESS_SECTION_DONE 1
+#define DECOMPRESS_SECTION_SIZED 2
+
/* The following flags are used by the ELF linker. */
/* Mark sections which have been allocated to segments. */
section size calculated on a previous linker relaxation pass. */
bfd_size_type rawsize;
+ /* The compressed size of the section in octets. */
+ bfd_size_type compressed_size;
+
/* Relaxation table. */
struct relax_table *relax;
/* name, id, index, next, prev, flags, user_set_vma, */ \
{ NAME, IDX, 0, NULL, NULL, FLAGS, 0, \
\
- /* linker_mark, linker_has_input, gc_mark, segment_mark, */ \
+ /* linker_mark, linker_has_input, gc_mark, decompress_status, */ \
0, 0, 1, 0, \
\
- /* sec_info_type, use_rela_p, */ \
- 0, 0, \
+ /* segment_mark, sec_info_type, use_rela_p, */ \
+ 0, 0, 0, \
\
/* sec_flg0, sec_flg1, sec_flg2, sec_flg3, sec_flg4, sec_flg5, */ \
0, 0, 0, 0, 0, 0, \
\
- /* vma, lma, size, rawsize, relax, relax_count, */ \
- 0, 0, 0, 0, 0, 0, \
+ /* vma, lma, size, rawsize, compressed_size, relax, relax_count, */ \
+ 0, 0, 0, 0, 0, 0, 0, \
\
/* output_offset, output_section, alignment_power, */ \
0, (struct bfd_section *) &SEC, 0, \
bfd_boolean bfd_set_section_flags
(bfd *abfd, asection *sec, flagword flags);
+void bfd_rename_section
+ (bfd *abfd, asection *sec, const char *newname);
+
void bfd_map_over_sections
(bfd *abfd,
void (*func) (bfd *abfd, asection *sect, void *obj),
#define bfd_mach_mips5 5
#define bfd_mach_mips_loongson_2e 3001
#define bfd_mach_mips_loongson_2f 3002
+#define bfd_mach_mips_loongson_3a 3003
#define bfd_mach_mips_sb1 12310201 /* octal 'SB', 01 */
#define bfd_mach_mips_octeon 6501
#define bfd_mach_mips_xlr 887682 /* decimal 'XLR' */
#define bfd_mach_i386_i386 1
#define bfd_mach_i386_i8086 2
#define bfd_mach_i386_i386_intel_syntax 3
+#define bfd_mach_x64_32 32
+#define bfd_mach_x64_32_intel_syntax 33
#define bfd_mach_x86_64 64
#define bfd_mach_x86_64_intel_syntax 65
bfd_arch_l1om, /* Intel L1OM */
BFD_RELOC_ARM_TLS_TPOFF32,
BFD_RELOC_ARM_TLS_IE32,
BFD_RELOC_ARM_TLS_LE32,
+ BFD_RELOC_ARM_TLS_GOTDESC,
+ BFD_RELOC_ARM_TLS_CALL,
+ BFD_RELOC_ARM_THM_TLS_CALL,
+ BFD_RELOC_ARM_TLS_DESCSEQ,
+ BFD_RELOC_ARM_THM_TLS_DESCSEQ,
+ BFD_RELOC_ARM_TLS_DESC,
/* ARM group relocations. */
BFD_RELOC_ARM_ALU_PC_G0_NC,
/* Annotation of BX instructions. */
BFD_RELOC_ARM_V4BX,
+/* ARM support for STT_GNU_IFUNC. */
+ BFD_RELOC_ARM_IRELATIVE,
+
/* These relocs are only used within the ARM assembler. They are not
(at present) written to any object files. */
BFD_RELOC_ARM_IMMEDIATE,
BFD_RELOC_ARM_T32_ADD_PC12,
BFD_RELOC_ARM_SHIFT_IMM,
BFD_RELOC_ARM_SMC,
+ BFD_RELOC_ARM_HVC,
BFD_RELOC_ARM_SWI,
BFD_RELOC_ARM_MULTI,
BFD_RELOC_ARM_CP_OFF_IMM,
BFD_RELOC_RX_GPRELL,
BFD_RELOC_RX_SYM,
BFD_RELOC_RX_OP_SUBTRACT,
+ BFD_RELOC_RX_OP_NEG,
BFD_RELOC_RX_ABS8,
BFD_RELOC_RX_ABS16,
+ BFD_RELOC_RX_ABS16_REV,
BFD_RELOC_RX_ABS32,
+ BFD_RELOC_RX_ABS32_REV,
BFD_RELOC_RX_ABS16U,
BFD_RELOC_RX_ABS16UW,
BFD_RELOC_RX_ABS16UL,
will be consistent from run to run. */
#define BFD_DETERMINISTIC_OUTPUT 0x4000
+ /* Compress sections in this BFD. */
+#define BFD_COMPRESS 0x8000
+
+ /* Decompress sections in this BFD. */
+#define BFD_DECOMPRESS 0x10000
+
+ /* Flags bits to be saved in bfd_preserve_save. */
+#define BFD_FLAGS_SAVED \
+ (BFD_IN_MEMORY | BFD_COMPRESS | BFD_DECOMPRESS)
+
+ /* Flags bits which are for BFD use only. */
+#define BFD_FLAGS_FOR_BFD_USE_MASK \
+ (BFD_IN_MEMORY | BFD_COMPRESS | BFD_DECOMPRESS | BFD_LINKER_CREATED \
+ | BFD_TRADITIONAL_FORMAT | BFD_DETERMINISTIC_OUTPUT)
+
/* Currently my_archive is tested before adding origin to
anything. I believe that this can become always an add of
origin, with origin set to 0 for non archive files. */
(bfd *abfd, asection *sec, bfd_byte *outbuf, asymbol **symbol_table);
/* Extracted from compress.c. */
-bfd_boolean bfd_uncompress_section_contents
- (bfd_byte **buffer, bfd_size_type *size);
+bfd_boolean bfd_compress_section_contents
+ (bfd *abfd, asection *section, bfd_byte *uncompressed_buffer,
+ bfd_size_type uncompressed_size);
+
+bfd_boolean bfd_get_full_section_contents
+ (bfd *abfd, asection *section, bfd_byte **ptr);
+
+bfd_boolean bfd_is_section_compressed
+ (bfd *abfd, asection *section);
+
+bfd_boolean bfd_init_section_decompress_status
+ (bfd *abfd, asection *section);
+
+bfd_boolean bfd_init_section_compress_status
+ (bfd *abfd, asection *section);
#ifdef __cplusplus
}