asection *bfd_make_section_old_way (bfd *abfd, const char *name);
+asection *bfd_make_section_anyway_with_flags
+ (bfd *abfd, const char *name, flagword flags);
+
asection *bfd_make_section_anyway (bfd *abfd, const char *name);
+asection *bfd_make_section_with_flags
+ (bfd *, const char *name, flagword flags);
+
asection *bfd_make_section (bfd *, const char *name);
bfd_boolean bfd_set_section_flags
/* Low 16 bits. */
BFD_RELOC_LO16,
+/* High 16 bits of 32-bit pc-relative value */
+ BFD_RELOC_HI16_PCREL,
+
+/* High 16 bits of 32-bit pc-relative value, adjusted */
+ BFD_RELOC_HI16_S_PCREL,
+
+/* Low 16 bits of pc-relative value */
+ BFD_RELOC_LO16_PCREL,
+
/* MIPS16 high 16 bits of 32-bit value. */
BFD_RELOC_MIPS16_HI16,
field in the instruction. */
BFD_RELOC_THUMB_PCREL_BLX,
-/* These relocs are only used within the ARM assembler. They are not
-(at present) written to any object files. */
- BFD_RELOC_ARM_IMMEDIATE,
- BFD_RELOC_ARM_ADRL_IMMEDIATE,
+/* Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
+The lowest bit must be zero and is not stored in the instruction.
+Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
+"nn" one smaller in all cases. Note further that BRANCH23
+corresponds to R_ARM_THM_CALL. */
+ BFD_RELOC_THUMB_PCREL_BRANCH7,
+ BFD_RELOC_THUMB_PCREL_BRANCH9,
+ BFD_RELOC_THUMB_PCREL_BRANCH12,
+ BFD_RELOC_THUMB_PCREL_BRANCH20,
+ BFD_RELOC_THUMB_PCREL_BRANCH23,
+ BFD_RELOC_THUMB_PCREL_BRANCH25,
+
+/* 12-bit immediate offset, used in ARM-format ldr and str instructions. */
BFD_RELOC_ARM_OFFSET_IMM,
- BFD_RELOC_ARM_SHIFT_IMM,
- BFD_RELOC_ARM_SMI,
- BFD_RELOC_ARM_SWI,
- BFD_RELOC_ARM_MULTI,
- BFD_RELOC_ARM_CP_OFF_IMM,
- BFD_RELOC_ARM_CP_OFF_IMM_S2,
- BFD_RELOC_ARM_ADR_IMM,
- BFD_RELOC_ARM_LDR_IMM,
- BFD_RELOC_ARM_LITERAL,
- BFD_RELOC_ARM_IN_POOL,
- BFD_RELOC_ARM_OFFSET_IMM8,
- BFD_RELOC_ARM_HWLITERAL,
- BFD_RELOC_ARM_THUMB_ADD,
- BFD_RELOC_ARM_THUMB_IMM,
- BFD_RELOC_ARM_THUMB_SHIFT,
+
+/* 5-bit immediate offset, used in Thumb-format ldr and str instructions. */
BFD_RELOC_ARM_THUMB_OFFSET,
- BFD_RELOC_ARM_GOT12,
- BFD_RELOC_ARM_GOT32,
- BFD_RELOC_ARM_JUMP_SLOT,
- BFD_RELOC_ARM_COPY,
- BFD_RELOC_ARM_GLOB_DAT,
- BFD_RELOC_ARM_PLT32,
- BFD_RELOC_ARM_RELATIVE,
- BFD_RELOC_ARM_GOTOFF,
- BFD_RELOC_ARM_GOTPC,
- BFD_RELOC_ARM_TLS_GD32,
- BFD_RELOC_ARM_TLS_LDO32,
- BFD_RELOC_ARM_TLS_LDM32,
- BFD_RELOC_ARM_TLS_DTPOFF32,
- BFD_RELOC_ARM_TLS_DTPMOD32,
- BFD_RELOC_ARM_TLS_TPOFF32,
- BFD_RELOC_ARM_TLS_IE32,
- BFD_RELOC_ARM_TLS_LE32,
/* Pc-relative or absolute relocation depending on target. Used for
entries in .init_array sections. */
/* Data segment base relative address. */
BFD_RELOC_ARM_SBREL32,
-/* This reloc is used for References to RTTI dta from exception handling
+/* This reloc is used for references to RTTI data from exception handling
tables. The actual definition depends on the target. It may be a
pc-relative or some form of GOT-indirect relocation. */
BFD_RELOC_ARM_TARGET2,
/* 31-bit PC relative address. */
BFD_RELOC_ARM_PREL31,
+/* Relocations for setting up GOTs and PLTs for shared libraries. */
+ BFD_RELOC_ARM_JUMP_SLOT,
+ BFD_RELOC_ARM_GLOB_DAT,
+ BFD_RELOC_ARM_GOT32,
+ BFD_RELOC_ARM_PLT32,
+ BFD_RELOC_ARM_RELATIVE,
+ BFD_RELOC_ARM_GOTOFF,
+ BFD_RELOC_ARM_GOTPC,
+
+/* ARM thread-local storage relocations. */
+ BFD_RELOC_ARM_TLS_GD32,
+ BFD_RELOC_ARM_TLS_LDO32,
+ BFD_RELOC_ARM_TLS_LDM32,
+ BFD_RELOC_ARM_TLS_DTPOFF32,
+ BFD_RELOC_ARM_TLS_DTPMOD32,
+ BFD_RELOC_ARM_TLS_TPOFF32,
+ BFD_RELOC_ARM_TLS_IE32,
+ BFD_RELOC_ARM_TLS_LE32,
+
+/* These relocs are only used within the ARM assembler. They are not
+(at present) written to any object files. */
+ BFD_RELOC_ARM_IMMEDIATE,
+ BFD_RELOC_ARM_ADRL_IMMEDIATE,
+ BFD_RELOC_ARM_T32_IMMEDIATE,
+ BFD_RELOC_ARM_SHIFT_IMM,
+ BFD_RELOC_ARM_SMI,
+ BFD_RELOC_ARM_SWI,
+ BFD_RELOC_ARM_MULTI,
+ BFD_RELOC_ARM_CP_OFF_IMM,
+ BFD_RELOC_ARM_CP_OFF_IMM_S2,
+ BFD_RELOC_ARM_ADR_IMM,
+ BFD_RELOC_ARM_LDR_IMM,
+ BFD_RELOC_ARM_LITERAL,
+ BFD_RELOC_ARM_IN_POOL,
+ BFD_RELOC_ARM_OFFSET_IMM8,
+ BFD_RELOC_ARM_T32_OFFSET_U8,
+ BFD_RELOC_ARM_T32_OFFSET_IMM,
+ BFD_RELOC_ARM_HWLITERAL,
+ BFD_RELOC_ARM_THUMB_ADD,
+ BFD_RELOC_ARM_THUMB_IMM,
+ BFD_RELOC_ARM_THUMB_SHIFT,
+
/* Renesas / SuperH SH relocs. Not all of these appear in object files. */
BFD_RELOC_SH_PCDISP8BY2,
BFD_RELOC_SH_PCDISP12BY2,
BFD_RELOC_SH_TLS_DTPOFF32,
BFD_RELOC_SH_TLS_TPOFF32,
-/* Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
-be zero and is not stored in the instruction. */
- BFD_RELOC_THUMB_PCREL_BRANCH9,
- BFD_RELOC_THUMB_PCREL_BRANCH12,
- BFD_RELOC_THUMB_PCREL_BRANCH23,
-
/* ARC Cores relocs.
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
not stored in the instruction. The high 20 bits are installed in bits 26
BFD_SEND (abfd, _bfd_find_nearest_line, \
(abfd, sec, syms, off, file, func, line))
+#define bfd_find_line(abfd, syms, sym, file, line) \
+ BFD_SEND (abfd, _bfd_find_line, \
+ (abfd, syms, sym, file, line))
+
+#define bfd_find_inliner_info(abfd, file, func, line) \
+ BFD_SEND (abfd, _bfd_find_inliner_info, \
+ (abfd, file, func, line))
+
#define bfd_debug_info_start(abfd) \
BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
NAME##_bfd_is_target_special_symbol, \
NAME##_get_lineno, \
NAME##_find_nearest_line, \
+ _bfd_generic_find_line, \
+ NAME##_find_inliner_info, \
NAME##_bfd_make_debug_symbol, \
NAME##_read_minisymbols, \
NAME##_minisymbol_to_symbol
bfd_boolean (*_bfd_find_nearest_line)
(bfd *, struct bfd_section *, struct bfd_symbol **, bfd_vma,
const char **, const char **, unsigned int *);
+ bfd_boolean (*_bfd_find_line)
+ (bfd *, struct bfd_symbol **, struct bfd_symbol *,
+ const char **, unsigned int *);
+ bfd_boolean (*_bfd_find_inliner_info)
+ (bfd *, const char **, const char **, unsigned int *);
/* Back-door to allow format-aware applications to create debug symbols
while using BFD for everything else. Currently used by the assembler
when creating COFF files. */