* config/tc-xtensa.h (resource_table): Change units to unsigned chars.

[deliverable/binutils-gdb.git] / bfd / bfd-in2.h

diff --git a/bfd/bfd-in2.h b/bfd/bfd-in2.h
index 6a648beff57732df8f1f992d62085d483beba1d4..93d86688cca89727f1523ef0edb62ec5edf1bf9a 100644 (file)
--- a/bfd/bfd-in2.h
+++ b/bfd/bfd-in2.h
@@ -2757,44 +2757,23 @@ not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
 field in the instruction.  */
   BFD_RELOC_THUMB_PCREL_BLX,
 
-/* These relocs are only used within the ARM assembler.  They are not
-(at present) written to any object files.  */
-  BFD_RELOC_ARM_IMMEDIATE,
-  BFD_RELOC_ARM_ADRL_IMMEDIATE,
+/* Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
+The lowest bit must be zero and is not stored in the instruction.
+Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
+"nn" one smaller in all cases.  Note further that BRANCH23
+corresponds to R_ARM_THM_CALL.  */
+  BFD_RELOC_THUMB_PCREL_BRANCH7,
+  BFD_RELOC_THUMB_PCREL_BRANCH9,
+  BFD_RELOC_THUMB_PCREL_BRANCH12,
+  BFD_RELOC_THUMB_PCREL_BRANCH20,
+  BFD_RELOC_THUMB_PCREL_BRANCH23,
+  BFD_RELOC_THUMB_PCREL_BRANCH25,
+
+/* 12-bit immediate offset, used in ARM-format ldr and str instructions.  */
   BFD_RELOC_ARM_OFFSET_IMM,
-  BFD_RELOC_ARM_SHIFT_IMM,
-  BFD_RELOC_ARM_SMI,
-  BFD_RELOC_ARM_SWI,
-  BFD_RELOC_ARM_MULTI,
-  BFD_RELOC_ARM_CP_OFF_IMM,
-  BFD_RELOC_ARM_CP_OFF_IMM_S2,
-  BFD_RELOC_ARM_ADR_IMM,
-  BFD_RELOC_ARM_LDR_IMM,
-  BFD_RELOC_ARM_LITERAL,
-  BFD_RELOC_ARM_IN_POOL,
-  BFD_RELOC_ARM_OFFSET_IMM8,
-  BFD_RELOC_ARM_HWLITERAL,
-  BFD_RELOC_ARM_THUMB_ADD,
-  BFD_RELOC_ARM_THUMB_IMM,
-  BFD_RELOC_ARM_THUMB_SHIFT,
+
+/* 5-bit immediate offset, used in Thumb-format ldr and str instructions.  */
   BFD_RELOC_ARM_THUMB_OFFSET,
-  BFD_RELOC_ARM_GOT12,
-  BFD_RELOC_ARM_GOT32,
-  BFD_RELOC_ARM_JUMP_SLOT,
-  BFD_RELOC_ARM_COPY,
-  BFD_RELOC_ARM_GLOB_DAT,
-  BFD_RELOC_ARM_PLT32,
-  BFD_RELOC_ARM_RELATIVE,
-  BFD_RELOC_ARM_GOTOFF,
-  BFD_RELOC_ARM_GOTPC,
-  BFD_RELOC_ARM_TLS_GD32,
-  BFD_RELOC_ARM_TLS_LDO32,
-  BFD_RELOC_ARM_TLS_LDM32,
-  BFD_RELOC_ARM_TLS_DTPOFF32,
-  BFD_RELOC_ARM_TLS_DTPMOD32,
-  BFD_RELOC_ARM_TLS_TPOFF32,
-  BFD_RELOC_ARM_TLS_IE32,
-  BFD_RELOC_ARM_TLS_LE32,
 
 /* Pc-relative or absolute relocation depending on target.  Used for
 entries in .init_array sections.  */
@@ -2806,7 +2785,7 @@ entries in .init_array sections.  */
 /* Data segment base relative address.  */
   BFD_RELOC_ARM_SBREL32,
 
-/* This reloc is used for References to RTTI dta from exception handling
+/* This reloc is used for references to RTTI data from exception handling
 tables.  The actual definition depends on the target.  It may be a
 pc-relative or some form of GOT-indirect relocation.  */
   BFD_RELOC_ARM_TARGET2,
@@ -2814,6 +2793,48 @@ pc-relative or some form of GOT-indirect relocation.  */
 /* 31-bit PC relative address.  */
   BFD_RELOC_ARM_PREL31,
 
+/* Relocations for setting up GOTs and PLTs for shared libraries.  */
+  BFD_RELOC_ARM_JUMP_SLOT,
+  BFD_RELOC_ARM_GLOB_DAT,
+  BFD_RELOC_ARM_GOT32,
+  BFD_RELOC_ARM_PLT32,
+  BFD_RELOC_ARM_RELATIVE,
+  BFD_RELOC_ARM_GOTOFF,
+  BFD_RELOC_ARM_GOTPC,
+
+/* ARM thread-local storage relocations.  */
+  BFD_RELOC_ARM_TLS_GD32,
+  BFD_RELOC_ARM_TLS_LDO32,
+  BFD_RELOC_ARM_TLS_LDM32,
+  BFD_RELOC_ARM_TLS_DTPOFF32,
+  BFD_RELOC_ARM_TLS_DTPMOD32,
+  BFD_RELOC_ARM_TLS_TPOFF32,
+  BFD_RELOC_ARM_TLS_IE32,
+  BFD_RELOC_ARM_TLS_LE32,
+
+/* These relocs are only used within the ARM assembler.  They are not
+(at present) written to any object files.  */
+  BFD_RELOC_ARM_IMMEDIATE,
+  BFD_RELOC_ARM_ADRL_IMMEDIATE,
+  BFD_RELOC_ARM_T32_IMMEDIATE,
+  BFD_RELOC_ARM_SHIFT_IMM,
+  BFD_RELOC_ARM_SMI,
+  BFD_RELOC_ARM_SWI,
+  BFD_RELOC_ARM_MULTI,
+  BFD_RELOC_ARM_CP_OFF_IMM,
+  BFD_RELOC_ARM_CP_OFF_IMM_S2,
+  BFD_RELOC_ARM_ADR_IMM,
+  BFD_RELOC_ARM_LDR_IMM,
+  BFD_RELOC_ARM_LITERAL,
+  BFD_RELOC_ARM_IN_POOL,
+  BFD_RELOC_ARM_OFFSET_IMM8,
+  BFD_RELOC_ARM_T32_OFFSET_U8,
+  BFD_RELOC_ARM_T32_OFFSET_IMM,
+  BFD_RELOC_ARM_HWLITERAL,
+  BFD_RELOC_ARM_THUMB_ADD,
+  BFD_RELOC_ARM_THUMB_IMM,
+  BFD_RELOC_ARM_THUMB_SHIFT,
+
 /* Renesas / SuperH SH relocs.  Not all of these appear in object files.  */
   BFD_RELOC_SH_PCDISP8BY2,
   BFD_RELOC_SH_PCDISP12BY2,
@@ -2906,12 +2927,6 @@ pc-relative or some form of GOT-indirect relocation.  */
   BFD_RELOC_SH_TLS_DTPOFF32,
   BFD_RELOC_SH_TLS_TPOFF32,
 
-/* Thumb 23-, 12- and 9-bit pc-relative branches.  The lowest bit must
-be zero and is not stored in the instruction.  */
-  BFD_RELOC_THUMB_PCREL_BRANCH9,
-  BFD_RELOC_THUMB_PCREL_BRANCH12,
-  BFD_RELOC_THUMB_PCREL_BRANCH23,
-
 /* ARC Cores relocs.
 ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
 not stored in the instruction.  The high 20 bits are installed in bits 26
@@ -4292,6 +4307,14 @@ bfd_boolean bfd_set_private_flags (bfd *abfd, flagword flags);
        BFD_SEND (abfd, _bfd_find_nearest_line, \
                  (abfd, sec, syms, off, file, func, line))
 
+#define bfd_find_line(abfd, syms, sym, file, line) \
+       BFD_SEND (abfd, _bfd_find_line, \
+                 (abfd, syms, sym, file, line))
+
+#define bfd_find_inliner_info(abfd, file, func, line) \
+       BFD_SEND (abfd, _bfd_find_inliner_info, \
+                 (abfd, file, func, line))
+
 #define bfd_debug_info_start(abfd) \
        BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
 
@@ -4628,6 +4651,8 @@ typedef struct bfd_target
   NAME##_bfd_is_target_special_symbol, \
   NAME##_get_lineno, \
   NAME##_find_nearest_line, \
+  _bfd_generic_find_line, \
+  NAME##_find_inliner_info, \
   NAME##_bfd_make_debug_symbol, \
   NAME##_read_minisymbols, \
   NAME##_minisymbol_to_symbol
@@ -4649,6 +4674,11 @@ typedef struct bfd_target
   bfd_boolean (*_bfd_find_nearest_line)
     (bfd *, struct bfd_section *, struct bfd_symbol **, bfd_vma,
      const char **, const char **, unsigned int *);
+  bfd_boolean (*_bfd_find_line)
+    (bfd *, struct bfd_symbol **, struct bfd_symbol *,
+     const char **, unsigned int *);
+  bfd_boolean (*_bfd_find_inliner_info)
+    (bfd *, const char **, const char **, unsigned int *);
  /* Back-door to allow format-aware applications to create debug symbols
     while using BFD for everything else.  Currently used by the assembler
     when creating COFF files.  */