#define LITSTRCPY(DEST,STR2) memcpy ((DEST), (STR2), sizeof (STR2))
+#define BFD_SUPPORTS_PLUGINS @supports_plugins@
+
/* The word size used by BFD on the host. This may be 64 with a 32
bit target if the host is 64 bit, or if other 64 bit targets have
been selected with --enable-targets, or if --enable-64-bit-bfd. */
extern void bfd_elf32_arm_set_vfp11_fix
(bfd *, struct bfd_link_info *);
+extern void bfd_elf32_arm_set_cortex_a8_fix
+ (bfd *, struct bfd_link_info *);
+
extern bfd_boolean bfd_elf32_arm_vfp11_erratum_scan
(bfd *, struct bfd_link_info *);
void bfd_elf32_arm_set_target_relocs
(bfd *, struct bfd_link_info *, int, char *, int, int, bfd_arm_vfp11_fix,
- int, int, int);
+ int, int, int, int);
extern bfd_boolean bfd_elf32_arm_get_bfd_for_interworking
(bfd *, struct bfd_link_info *);
struct bfd_section * (*) (const char *, struct bfd_section *), void (*) (void));
extern bfd_boolean elf32_arm_build_stubs
(struct bfd_link_info *);
-
+
+/* ARM unwind section editing support. */
+extern bfd_boolean elf32_arm_fix_exidx_coverage
+ (struct bfd_section **, unsigned int, struct bfd_link_info *);
+
/* TI COFF load page support. */
extern void bfd_ticoff_set_section_load_page
(struct bfd_section *, int);
file_ptr bfd_get_size (bfd *abfd);
+void *bfd_mmap (bfd *abfd, void *addr, bfd_size_type len,
+ int prot, int flags, file_ptr offset);
+
/* Extracted from bfdwin.c. */
/* Extracted from section.c. */
typedef struct bfd_section
section size calculated on a previous linker relaxation pass. */
bfd_size_type rawsize;
+ /* Relaxation table. */
+ struct relax_table *relax;
+
+ /* Count of used relaxation table entries. */
+ int relax_count;
+
+
/* If this section is going to be output, then this value is the
offset in *bytes* into the output section of the first byte in the
input section (byte ==> smallest addressable unit on the
} map_head, map_tail;
} asection;
+/* Relax table contains information about instructions which can
+ be removed by relaxation -- replacing a long address with a
+ short address. */
+struct relax_table {
+ /* Address where bytes may be deleted. */
+ bfd_vma addr;
+
+ /* Number of bytes to be deleted. */
+ int size;
+};
+
/* These sections are global, and are managed by BFD. The application
and target back end are not permitted to change the values in
these sections. New code should use the section_ptr macros rather
/* has_tls_get_addr_call, has_gp_reloc, need_finalize_relax, */ \
0, 0, 0, \
\
- /* reloc_done, vma, lma, size, rawsize */ \
- 0, 0, 0, 0, 0, \
+ /* reloc_done, vma, lma, size, rawsize, relax, relax_count, */ \
+ 0, 0, 0, 0, 0, 0, 0, \
\
/* output_offset, output_section, alignment_power, */ \
0, (struct bfd_section *) &SEC, 0, \
#define bfd_mach_i386_i386_intel_syntax 3
#define bfd_mach_x86_64 64
#define bfd_mach_x86_64_intel_syntax 65
+ bfd_arch_l1om, /* Intel L1OM */
+#define bfd_mach_l1om 66
+#define bfd_mach_l1om_intel_syntax 67
bfd_arch_we32k, /* AT&T WE32xxx */
bfd_arch_tahoe, /* CCI/Harris Tahoe */
bfd_arch_i860, /* Intel 860 */
#define bfd_mach_h8300sx 6
#define bfd_mach_h8300sxn 7
bfd_arch_pdp11, /* DEC PDP-11 */
+ bfd_arch_plugin,
bfd_arch_powerpc, /* PowerPC */
#define bfd_mach_ppc 32
#define bfd_mach_ppc64 64
#define bfd_mach_ppc_403 403
#define bfd_mach_ppc_403gc 4030
+#define bfd_mach_ppc_405 405
#define bfd_mach_ppc_505 505
#define bfd_mach_ppc_601 601
#define bfd_mach_ppc_602 602
#define bfd_mach_r800 11 /* R800: successor with multiplication. */
bfd_arch_lm32, /* Lattice Mico32 */
#define bfd_mach_lm32 1
+ bfd_arch_microblaze,/* Xilinx MicroBlaze. */
bfd_arch_last
};
BFD_RELOC_SPU_HI16,
BFD_RELOC_SPU_PPU32,
BFD_RELOC_SPU_PPU64,
+ BFD_RELOC_SPU_ADD_PIC,
/* Alpha ECOFF and ELF relocations. Some of these treat the symbol or
"addend" in some special way.
BFD_RELOC_MIPS_JUMP_SLOT,
+/* Moxie ELF relocations. */
+ BFD_RELOC_MOXIE_10_PCREL,
+
+
/* Fujitsu Frv Relocations. */
BFD_RELOC_FRV_LABEL16,
BFD_RELOC_FRV_LABEL24,
BFD_RELOC_386_TLS_GOTDESC,
BFD_RELOC_386_TLS_DESC_CALL,
BFD_RELOC_386_TLS_DESC,
+ BFD_RELOC_386_IRELATIVE,
/* x86-64/elf relocations */
BFD_RELOC_X86_64_GOT32,
BFD_RELOC_X86_64_GOTPC32_TLSDESC,
BFD_RELOC_X86_64_TLSDESC_CALL,
BFD_RELOC_X86_64_TLSDESC,
+ BFD_RELOC_X86_64_IRELATIVE,
/* ns32k relocations */
BFD_RELOC_NS32K_IMM_8,
BFD_RELOC_LM32_GLOB_DAT,
BFD_RELOC_LM32_JMP_SLOT,
BFD_RELOC_LM32_RELATIVE,
+
+/* Difference between two section addreses. Must be followed by a
+BFD_RELOC_MACH_O_PAIR. */
+ BFD_RELOC_MACH_O_SECTDIFF,
+
+/* Mach-O generic relocations. */
+ BFD_RELOC_MACH_O_PAIR,
+
+/* This is a 32 bit reloc for the microblaze that stores the
+low 16 bits of a value */
+ BFD_RELOC_MICROBLAZE_32_LO,
+
+/* This is a 32 bit pc-relative reloc for the microblaze that
+stores the low 16 bits of a value */
+ BFD_RELOC_MICROBLAZE_32_LO_PCREL,
+
+/* This is a 32 bit reloc for the microblaze that stores a
+value relative to the read-only small data area anchor */
+ BFD_RELOC_MICROBLAZE_32_ROSDA,
+
+/* This is a 32 bit reloc for the microblaze that stores a
+value relative to the read-write small data area anchor */
+ BFD_RELOC_MICROBLAZE_32_RWSDA,
+
+/* This is a 32 bit reloc for the microblaze to handle
+expressions of the form "Symbol Op Symbol" */
+ BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction). No relocation is
+done here - only used for relaxing */
+ BFD_RELOC_MICROBLAZE_64_NONE,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction). The relocation is
+PC-relative GOT offset */
+ BFD_RELOC_MICROBLAZE_64_GOTPC,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction). The relocation is
+GOT offset */
+ BFD_RELOC_MICROBLAZE_64_GOT,
+
+/* This is a 64 bit reloc that stores the 32 bit pc relative
+value in two words (with an imm instruction). The relocation is
+PC-relative offset into PLT */
+ BFD_RELOC_MICROBLAZE_64_PLT,
+
+/* This is a 64 bit reloc that stores the 32 bit GOT relative
+value in two words (with an imm instruction). The relocation is
+relative offset from _GLOBAL_OFFSET_TABLE_ */
+ BFD_RELOC_MICROBLAZE_64_GOTOFF,
+
+/* This is a 32 bit reloc that stores the 32 bit GOT relative
+value in a word. The relocation is relative offset from */
+ BFD_RELOC_MICROBLAZE_32_GOTOFF,
+
+/* This is used to tell the dynamic linker to copy the value out of
+the dynamic object into the runtime process image. */
+ BFD_RELOC_MICROBLAZE_COPY,
BFD_RELOC_UNUSED };
typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
reloc_howto_type *bfd_reloc_type_lookup
/* This symbol was created by bfd_get_synthetic_symtab. */
#define BSF_SYNTHETIC (1 << 21)
+ /* This symbol is an indirect code object. Unrelated to BSF_INDIRECT.
+ The dynamic linker will compute the value of this symbol by
+ calling the function that it points to. BSF_FUNCTION must
+ also be also set. */
+#define BSF_GNU_INDIRECT_FUNCTION (1 << 22)
+ /* This symbol is a globally unique data object. The dynamic linker
+ will make sure that in the entire process there is just one symbol
+ with this name and type in use. BSF_OBJECT must also be set. */
+#define BSF_GNU_UNIQUE (1 << 23)
+
flagword flags;
/* A pointer to the section to which this symbol is
struct netbsd_core_struct *netbsd_core_data;
struct mach_o_data_struct *mach_o_data;
struct mach_o_fat_data_struct *mach_o_fat_data;
+ struct plugin_data_struct *plugin_data;
struct bfd_pef_data_struct *pef_data;
struct bfd_pef_xlib_data_struct *pef_xlib_data;
struct bfd_sym_data_struct *sym_data;
#define bfd_define_common_symbol(output_bfd, info, h) \
BFD_SEND (output_bfd, _bfd_define_common_symbol, (output_bfd, info, h))
+struct bfd_elf_version_tree * bfd_find_version_for_sym
+ (struct bfd_elf_version_tree *verdefs,
+ const char *sym_name, bfd_boolean *hide);
+
/* Extracted from simple.c. */
bfd_byte *bfd_simple_get_relocated_section_contents
(bfd *abfd, asection *sec, bfd_byte *outbuf, asymbol **symbol_table);
projects / deliverable / binutils-gdb.git / blobdiff