(struct bfd_link_info *);
extern bfd_boolean bfd_elf32_arm_process_before_allocation
- (bfd *, struct bfd_link_info *, int, int, int);
+ (bfd *, struct bfd_link_info *, int);
+
+void bfd_elf32_arm_set_target_relocs
+ (struct bfd_link_info *, int, char *);
extern bfd_boolean bfd_elf32_arm_get_bfd_for_interworking
(bfd *, struct bfd_link_info *);
asection *bfd_sections_find_if
(bfd *abfd,
- bfd_boolean (*func) (bfd *abfd, asection *sect, void *obj),
+ bfd_boolean (*operation) (bfd *abfd, asection *sect, void *obj),
void *obj);
bfd_boolean bfd_set_section_size
#define bfd_mach_sh_dsp 0x2d
#define bfd_mach_sh2a 0x2a
#define bfd_mach_sh2a_nofpu 0x2b
+#define bfd_mach_sh2a_fake1 0x2a1
+#define bfd_mach_sh2a_fake2 0x2a2
+#define bfd_mach_sh2a_fake3 0x2a3
+#define bfd_mach_sh2a_fake4 0x2a4
#define bfd_mach_sh2e 0x2e
#define bfd_mach_sh3 0x30
#define bfd_mach_sh3_nommu 0x31
bfd_arch_crx, /* National Semiconductor CRX. */
#define bfd_mach_crx 1
bfd_arch_cris, /* Axis CRIS */
+#define bfd_mach_cris_v0_v10 255
+#define bfd_mach_cris_v32 32
+#define bfd_mach_cris_v10_v32 1032
bfd_arch_s390, /* IBM s390 */
#define bfd_mach_s390_31 31
#define bfd_mach_s390_64 64
#define bfd_mach_msp44 44
bfd_arch_xtensa, /* Tensilica's Xtensa cores. */
#define bfd_mach_xtensa 1
+ bfd_arch_maxq, /* Dallas MAXQ 10/20 */
bfd_arch_last
};
BFD_RELOC_ARM_ADRL_IMMEDIATE,
BFD_RELOC_ARM_OFFSET_IMM,
BFD_RELOC_ARM_SHIFT_IMM,
+ BFD_RELOC_ARM_SMI,
BFD_RELOC_ARM_SWI,
BFD_RELOC_ARM_MULTI,
BFD_RELOC_ARM_CP_OFF_IMM,
/* Data segment base relative address. */
BFD_RELOC_ARM_SBREL32,
+/* This reloc is used for References to RTTI dta from exception handling
+tables. The actual definition depends on the target. It may be a
+pc-relative or some form of GOT-indirect relocation. */
+ BFD_RELOC_ARM_TARGET2,
+
+/* 31-bit PC relative address. */
+ BFD_RELOC_ARM_PREL31,
+
/* Renesas / SuperH SH relocs. Not all of these appear in object files. */
BFD_RELOC_SH_PCDISP8BY2,
BFD_RELOC_SH_PCDISP12BY2,
BFD_RELOC_CRIS_UNSIGNED_5,
BFD_RELOC_CRIS_SIGNED_6,
BFD_RELOC_CRIS_UNSIGNED_6,
+ BFD_RELOC_CRIS_SIGNED_8,
+ BFD_RELOC_CRIS_UNSIGNED_8,
+ BFD_RELOC_CRIS_SIGNED_16,
+ BFD_RELOC_CRIS_UNSIGNED_16,
+ BFD_RELOC_CRIS_LAPCQ_OFFSET,
BFD_RELOC_CRIS_UNSIGNED_4,
/* Relocs used in ELF shared libraries for CRIS. */
PLT entries. Otherwise, this is just a generic 32-bit relocation. */
BFD_RELOC_XTENSA_PLT,
-/* Generic Xtensa relocations. Only the operand number is encoded
-in the relocation. The details are determined by extracting the
-instruction opcode. */
+/* Xtensa relocations to mark the difference of two local symbols.
+These are only needed to support linker relaxation and can be ignored
+when not relaxing. The field is set to the value of the difference
+assuming no relaxation. The relocation encodes the position of the
+first symbol so the linker can determine whether to adjust the field
+value. */
+ BFD_RELOC_XTENSA_DIFF8,
+ BFD_RELOC_XTENSA_DIFF16,
+ BFD_RELOC_XTENSA_DIFF32,
+
+/* Generic Xtensa relocations for instruction operands. Only the slot
+number is encoded in the relocation. The relocation applies to the
+last PC-relative immediate operand, or if there are no PC-relative
+immediates, to the last immediate operand. */
+ BFD_RELOC_XTENSA_SLOT0_OP,
+ BFD_RELOC_XTENSA_SLOT1_OP,
+ BFD_RELOC_XTENSA_SLOT2_OP,
+ BFD_RELOC_XTENSA_SLOT3_OP,
+ BFD_RELOC_XTENSA_SLOT4_OP,
+ BFD_RELOC_XTENSA_SLOT5_OP,
+ BFD_RELOC_XTENSA_SLOT6_OP,
+ BFD_RELOC_XTENSA_SLOT7_OP,
+ BFD_RELOC_XTENSA_SLOT8_OP,
+ BFD_RELOC_XTENSA_SLOT9_OP,
+ BFD_RELOC_XTENSA_SLOT10_OP,
+ BFD_RELOC_XTENSA_SLOT11_OP,
+ BFD_RELOC_XTENSA_SLOT12_OP,
+ BFD_RELOC_XTENSA_SLOT13_OP,
+ BFD_RELOC_XTENSA_SLOT14_OP,
+
+/* Alternate Xtensa relocations. Only the slot is encoded in the
+relocation. The meaning of these relocations is opcode-specific. */
+ BFD_RELOC_XTENSA_SLOT0_ALT,
+ BFD_RELOC_XTENSA_SLOT1_ALT,
+ BFD_RELOC_XTENSA_SLOT2_ALT,
+ BFD_RELOC_XTENSA_SLOT3_ALT,
+ BFD_RELOC_XTENSA_SLOT4_ALT,
+ BFD_RELOC_XTENSA_SLOT5_ALT,
+ BFD_RELOC_XTENSA_SLOT6_ALT,
+ BFD_RELOC_XTENSA_SLOT7_ALT,
+ BFD_RELOC_XTENSA_SLOT8_ALT,
+ BFD_RELOC_XTENSA_SLOT9_ALT,
+ BFD_RELOC_XTENSA_SLOT10_ALT,
+ BFD_RELOC_XTENSA_SLOT11_ALT,
+ BFD_RELOC_XTENSA_SLOT12_ALT,
+ BFD_RELOC_XTENSA_SLOT13_ALT,
+ BFD_RELOC_XTENSA_SLOT14_ALT,
+
+/* Xtensa relocations for backward compatibility. These have all been
+replaced by BFD_RELOC_XTENSA_SLOT0_OP. */
BFD_RELOC_XTENSA_OP0,
BFD_RELOC_XTENSA_OP1,
BFD_RELOC_XTENSA_OP2,
#define bfd_is_local_label_name(abfd, name) \
BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name))
+bfd_boolean bfd_is_target_special_symbol (bfd *abfd, asymbol *sym);
+
+#define bfd_is_target_special_symbol(abfd, sym) \
+ BFD_SEND (abfd, _bfd_is_target_special_symbol, (abfd, sym))
+
#define bfd_canonicalize_symtab(abfd, location) \
BFD_SEND (abfd, _bfd_canonicalize_symtab, (abfd, location))
/* Pointer to structure which contains architecture information. */
const struct bfd_arch_info *arch_info;
+ /* Flag set if symbols from this BFD should not be exported. */
+ bfd_boolean no_export;
+
/* Stuff only useful for archives. */
void *arelt_data;
struct bfd *my_archive; /* The containing archive BFD. */
NAME##_print_symbol, \
NAME##_get_symbol_info, \
NAME##_bfd_is_local_label_name, \
+ NAME##_bfd_is_target_special_symbol, \
NAME##_get_lineno, \
NAME##_find_nearest_line, \
NAME##_bfd_make_debug_symbol, \
(bfd *, struct bfd_symbol *, symbol_info *);
#define bfd_get_symbol_info(b,p,e) BFD_SEND (b, _bfd_get_symbol_info, (b,p,e))
bfd_boolean (*_bfd_is_local_label_name) (bfd *, const char *);
-
+ bfd_boolean (*_bfd_is_target_special_symbol) (bfd *, asymbol *);
alent * (*_get_lineno) (bfd *, struct bfd_symbol *);
bfd_boolean (*_bfd_find_nearest_line)
(bfd *, struct bfd_section *, struct bfd_symbol **, bfd_vma,