#define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma = (val)), ((ptr)->user_set_vma = TRUE), TRUE)
#define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),TRUE)
#define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),TRUE)
+/* Find the address one past the end of SEC. */
+#define bfd_get_section_limit(bfd, sec) \
+ (((sec)->rawsize ? (sec)->rawsize : (sec)->size) \
+ / bfd_octets_per_byte (bfd))
typedef struct stat stat_type;
\f
bfd_uint64_t bfd_get_bits (const void *, int, bfd_boolean);
void bfd_put_bits (bfd_uint64_t, void *, int, bfd_boolean);
+
+extern bfd_boolean bfd_section_already_linked_table_init (void);
+extern void bfd_section_already_linked_table_free (void);
\f
/* Externally visible ECOFF routines. */
enum dynamic_lib_link_class {
DYN_NORMAL = 0,
DYN_AS_NEEDED = 1,
- DYN_DT_NEEDED = 2
+ DYN_DT_NEEDED = 2,
+ DYN_NO_ADD_NEEDED = 4,
+ DYN_NO_NEEDED = 8
};
extern bfd_boolean bfd_elf_record_link_assignment
(bfd *);
extern void bfd_elf_set_dyn_lib_class
(bfd *, int);
+extern int bfd_elf_get_dyn_lib_class
+ (bfd *);
extern struct bfd_link_needed_list *bfd_elf_get_runpath_list
(bfd *, struct bfd_link_info *);
extern bfd_boolean bfd_elf_discard_info
(struct bfd_link_info *);
extern bfd_boolean bfd_elf32_arm_process_before_allocation
- (bfd *, struct bfd_link_info *, int, int);
+ (bfd *, struct bfd_link_info *, int);
+
+void bfd_elf32_arm_set_target_relocs
+ (struct bfd_link_info *, int, char *);
extern bfd_boolean bfd_elf32_arm_get_bfd_for_interworking
(bfd *, struct bfd_link_info *);
extern void bfd_elf64_ia64_after_parse
(int);
+/* This structure is used for a comdat section, as in PE. A comdat
+ section is associated with a particular symbol. When the linker
+ sees a comdat section, it keeps only one of the sections with a
+ given name and associated with a given symbol. */
+
+struct coff_comdat_info
+{
+ /* The name of the symbol associated with a comdat section. */
+ const char *name;
+
+ /* The local symbol table index of the symbol associated with a
+ comdat section. This is only meaningful to the object file format
+ specific code; it is not an index into the list returned by
+ bfd_canonicalize_symtab. */
+ long symbol;
+};
+
+extern struct coff_comdat_info *bfd_coff_get_comdat_section
+ (bfd *, struct bfd_section *);
+
/* Extracted from init.c. */
void bfd_init (void);
/* Extracted from bfdwin.c. */
/* Extracted from section.c. */
-/* This structure is used for a comdat section, as in PE. A comdat
- section is associated with a particular symbol. When the linker
- sees a comdat section, it keeps only one of the sections with a
- given name and associated with a given symbol. */
-
-struct bfd_comdat_info
-{
- /* The name of the symbol associated with a comdat section. */
- const char *name;
-
- /* The local symbol table index of the symbol associated with a
- comdat section. This is only meaningful to the object file format
- specific code; it is not an index into the list returned by
- bfd_canonicalize_symtab. */
- long symbol;
-};
-
typedef struct bfd_section
{
/* The name of the section; the name isn't a copy, the pointer is
size of <<.bss>>). */
bfd_size_type size;
- /* The original size on disk of the section, in octets. This field
- is used by the linker relaxation code. It is currently only set
- for sections where the linker relaxation scheme doesn't cache
- altered section and reloc contents (stabs, eh_frame, SEC_MERGE),
- and thus the original size needs to be kept to read the section
- multiple times. If non-zero, rawsize will be used in address
- checks during relocation and to read section contents. */
+ /* For input sections, the original size on disk of the section, in
+ octets. This field is used by the linker relaxation code. It is
+ currently only set for sections where the linker relaxation scheme
+ doesn't cache altered section and reloc contents (stabs, eh_frame,
+ SEC_MERGE, some coff relaxing targets), and thus the original size
+ needs to be kept to read the section multiple times.
+ For output sections, rawsize holds the section size calculated on
+ a previous linker relaxation pass. */
bfd_size_type rawsize;
/* If this section is going to be output, then this value is the
/* Entity size for merging purposes. */
unsigned int entsize;
- /* Optional information about a COMDAT entry; NULL if not COMDAT. */
- struct bfd_comdat_info *comdat;
-
/* Points to the kept section if this section is a link-once section,
and is discarded. */
struct bfd_section *kept_section;
asection *bfd_sections_find_if
(bfd *abfd,
- bfd_boolean (*func) (bfd *abfd, asection *sect, void *obj),
+ bfd_boolean (*operation) (bfd *abfd, asection *sect, void *obj),
void *obj);
bfd_boolean bfd_set_section_size
#define bfd_mach_sparc_v9_p(mach) \
((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \
&& (mach) != bfd_mach_sparc_sparclite_le)
+/* Nonzero if MACH is a 64 bit sparc architecture. */
+#define bfd_mach_sparc_64bit_p(mach) \
+ ((mach) >= bfd_mach_sparc_v9 && (mach) != bfd_mach_sparc_v8plusb)
bfd_arch_mips, /* MIPS Rxxxx */
#define bfd_mach_mips3000 3000
#define bfd_mach_mips3900 3900
#define bfd_mach_mips6000 6000
#define bfd_mach_mips7000 7000
#define bfd_mach_mips8000 8000
+#define bfd_mach_mips9000 9000
#define bfd_mach_mips10000 10000
#define bfd_mach_mips12000 12000
#define bfd_mach_mips16 16
#define bfd_mach_sh 1
#define bfd_mach_sh2 0x20
#define bfd_mach_sh_dsp 0x2d
+#define bfd_mach_sh2a 0x2a
+#define bfd_mach_sh2a_nofpu 0x2b
+#define bfd_mach_sh2a_nofpu_or_sh4_nommu_nofpu 0x2a1
+#define bfd_mach_sh2a_nofpu_or_sh3_nommu 0x2a2
+#define bfd_mach_sh2a_or_sh4 0x2a3
+#define bfd_mach_sh2a_or_sh3e 0x2a4
#define bfd_mach_sh2e 0x2e
#define bfd_mach_sh3 0x30
#define bfd_mach_sh3_nommu 0x31
#define bfd_mach_avr5 5
bfd_arch_cr16c, /* National Semiconductor CompactRISC. */
#define bfd_mach_cr16c 1
+ bfd_arch_crx, /* National Semiconductor CRX. */
+#define bfd_mach_crx 1
bfd_arch_cris, /* Axis CRIS */
+#define bfd_mach_cris_v0_v10 255
+#define bfd_mach_cris_v32 32
+#define bfd_mach_cris_v10_v32 1032
bfd_arch_s390, /* IBM s390 */
#define bfd_mach_s390_31 31
#define bfd_mach_s390_64 64
#define bfd_mach_msp44 44
bfd_arch_xtensa, /* Tensilica's Xtensa cores. */
#define bfd_mach_xtensa 1
+ bfd_arch_maxq, /* Dallas MAXQ 10/20 */
bfd_arch_last
};
BFD_RELOC_ARM_ADRL_IMMEDIATE,
BFD_RELOC_ARM_OFFSET_IMM,
BFD_RELOC_ARM_SHIFT_IMM,
+ BFD_RELOC_ARM_SMI,
BFD_RELOC_ARM_SWI,
BFD_RELOC_ARM_MULTI,
BFD_RELOC_ARM_CP_OFF_IMM,
BFD_RELOC_ARM_GOTOFF,
BFD_RELOC_ARM_GOTPC,
+/* Pc-relative or absolute relocation depending on target. Used for
+entries in .init_array sections. */
+ BFD_RELOC_ARM_TARGET1,
+
+/* Read-only segment base relative address. */
+ BFD_RELOC_ARM_ROSEGREL32,
+
+/* Data segment base relative address. */
+ BFD_RELOC_ARM_SBREL32,
+
+/* This reloc is used for References to RTTI dta from exception handling
+tables. The actual definition depends on the target. It may be a
+pc-relative or some form of GOT-indirect relocation. */
+ BFD_RELOC_ARM_TARGET2,
+
+/* 31-bit PC relative address. */
+ BFD_RELOC_ARM_PREL31,
+
/* Renesas / SuperH SH relocs. Not all of these appear in object files. */
BFD_RELOC_SH_PCDISP8BY2,
BFD_RELOC_SH_PCDISP12BY2,
+ BFD_RELOC_SH_IMM3,
+ BFD_RELOC_SH_IMM3U,
+ BFD_RELOC_SH_DISP12,
+ BFD_RELOC_SH_DISP12BY2,
+ BFD_RELOC_SH_DISP12BY4,
+ BFD_RELOC_SH_DISP12BY8,
+ BFD_RELOC_SH_DISP20,
+ BFD_RELOC_SH_DISP20BY8,
BFD_RELOC_SH_IMM4,
BFD_RELOC_SH_IMM4BY2,
BFD_RELOC_SH_IMM4BY4,
/* Used to maintain alignment whilst relaxing. */
BFD_RELOC_V850_ALIGN,
+/* This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
+instructions. */
+ BFD_RELOC_V850_LO16_SPLIT_OFFSET,
+
/* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
instruction. */
BFD_RELOC_MN10300_32_PCREL,
into 22 bits. */
BFD_RELOC_AVR_CALL,
+/* This is a 16 bit reloc for the AVR that stores all needed bits
+for absolute addressing with ldi with overflow check to linktime */
+ BFD_RELOC_AVR_LDI,
+
+/* This is a 6 bit reloc for the AVR that stores offset for ldd/std
+instructions */
+ BFD_RELOC_AVR_6,
+
+/* This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
+instructions */
+ BFD_RELOC_AVR_6_ADIW,
+
/* Direct 12 bit. */
BFD_RELOC_390_12,
BFD_RELOC_16C_IMM32,
BFD_RELOC_16C_IMM32_C,
+/* NS CRX Relocations. */
+ BFD_RELOC_CRX_REL4,
+ BFD_RELOC_CRX_REL8,
+ BFD_RELOC_CRX_REL8_CMP,
+ BFD_RELOC_CRX_REL16,
+ BFD_RELOC_CRX_REL24,
+ BFD_RELOC_CRX_REL32,
+ BFD_RELOC_CRX_REGREL12,
+ BFD_RELOC_CRX_REGREL22,
+ BFD_RELOC_CRX_REGREL28,
+ BFD_RELOC_CRX_REGREL32,
+ BFD_RELOC_CRX_ABS16,
+ BFD_RELOC_CRX_ABS32,
+ BFD_RELOC_CRX_NUM8,
+ BFD_RELOC_CRX_NUM16,
+ BFD_RELOC_CRX_NUM32,
+ BFD_RELOC_CRX_IMM16,
+ BFD_RELOC_CRX_IMM32,
+ BFD_RELOC_CRX_SWITCH8,
+ BFD_RELOC_CRX_SWITCH16,
+ BFD_RELOC_CRX_SWITCH32,
+
/* These relocs are only used within the CRIS assembler. They are not
(at present) written to any object files. */
BFD_RELOC_CRIS_BDISP8,
BFD_RELOC_CRIS_UNSIGNED_5,
BFD_RELOC_CRIS_SIGNED_6,
BFD_RELOC_CRIS_UNSIGNED_6,
+ BFD_RELOC_CRIS_SIGNED_8,
+ BFD_RELOC_CRIS_UNSIGNED_8,
+ BFD_RELOC_CRIS_SIGNED_16,
+ BFD_RELOC_CRIS_UNSIGNED_16,
+ BFD_RELOC_CRIS_LAPCQ_OFFSET,
BFD_RELOC_CRIS_UNSIGNED_4,
/* Relocs used in ELF shared libraries for CRIS. */
BFD_RELOC_MSP430_16,
BFD_RELOC_MSP430_16_PCREL_BYTE,
BFD_RELOC_MSP430_16_BYTE,
+ BFD_RELOC_MSP430_2X_PCREL,
+ BFD_RELOC_MSP430_RL_PCREL,
/* IQ2000 Relocations. */
BFD_RELOC_IQ2000_OFFSET_16,
PLT entries. Otherwise, this is just a generic 32-bit relocation. */
BFD_RELOC_XTENSA_PLT,
-/* Generic Xtensa relocations. Only the operand number is encoded
-in the relocation. The details are determined by extracting the
-instruction opcode. */
+/* Xtensa relocations to mark the difference of two local symbols.
+These are only needed to support linker relaxation and can be ignored
+when not relaxing. The field is set to the value of the difference
+assuming no relaxation. The relocation encodes the position of the
+first symbol so the linker can determine whether to adjust the field
+value. */
+ BFD_RELOC_XTENSA_DIFF8,
+ BFD_RELOC_XTENSA_DIFF16,
+ BFD_RELOC_XTENSA_DIFF32,
+
+/* Generic Xtensa relocations for instruction operands. Only the slot
+number is encoded in the relocation. The relocation applies to the
+last PC-relative immediate operand, or if there are no PC-relative
+immediates, to the last immediate operand. */
+ BFD_RELOC_XTENSA_SLOT0_OP,
+ BFD_RELOC_XTENSA_SLOT1_OP,
+ BFD_RELOC_XTENSA_SLOT2_OP,
+ BFD_RELOC_XTENSA_SLOT3_OP,
+ BFD_RELOC_XTENSA_SLOT4_OP,
+ BFD_RELOC_XTENSA_SLOT5_OP,
+ BFD_RELOC_XTENSA_SLOT6_OP,
+ BFD_RELOC_XTENSA_SLOT7_OP,
+ BFD_RELOC_XTENSA_SLOT8_OP,
+ BFD_RELOC_XTENSA_SLOT9_OP,
+ BFD_RELOC_XTENSA_SLOT10_OP,
+ BFD_RELOC_XTENSA_SLOT11_OP,
+ BFD_RELOC_XTENSA_SLOT12_OP,
+ BFD_RELOC_XTENSA_SLOT13_OP,
+ BFD_RELOC_XTENSA_SLOT14_OP,
+
+/* Alternate Xtensa relocations. Only the slot is encoded in the
+relocation. The meaning of these relocations is opcode-specific. */
+ BFD_RELOC_XTENSA_SLOT0_ALT,
+ BFD_RELOC_XTENSA_SLOT1_ALT,
+ BFD_RELOC_XTENSA_SLOT2_ALT,
+ BFD_RELOC_XTENSA_SLOT3_ALT,
+ BFD_RELOC_XTENSA_SLOT4_ALT,
+ BFD_RELOC_XTENSA_SLOT5_ALT,
+ BFD_RELOC_XTENSA_SLOT6_ALT,
+ BFD_RELOC_XTENSA_SLOT7_ALT,
+ BFD_RELOC_XTENSA_SLOT8_ALT,
+ BFD_RELOC_XTENSA_SLOT9_ALT,
+ BFD_RELOC_XTENSA_SLOT10_ALT,
+ BFD_RELOC_XTENSA_SLOT11_ALT,
+ BFD_RELOC_XTENSA_SLOT12_ALT,
+ BFD_RELOC_XTENSA_SLOT13_ALT,
+ BFD_RELOC_XTENSA_SLOT14_ALT,
+
+/* Xtensa relocations for backward compatibility. These have all been
+replaced by BFD_RELOC_XTENSA_SLOT0_OP. */
BFD_RELOC_XTENSA_OP0,
BFD_RELOC_XTENSA_OP1,
BFD_RELOC_XTENSA_OP2,
#define bfd_is_local_label_name(abfd, name) \
BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name))
+bfd_boolean bfd_is_target_special_symbol (bfd *abfd, asymbol *sym);
+
+#define bfd_is_target_special_symbol(abfd, sym) \
+ BFD_SEND (abfd, _bfd_is_target_special_symbol, (abfd, sym))
+
#define bfd_canonicalize_symtab(abfd, location) \
BFD_SEND (abfd, _bfd_canonicalize_symtab, (abfd, location))
/* Pointer to structure which contains architecture information. */
const struct bfd_arch_info *arch_info;
+ /* Flag set if symbols from this BFD should not be exported. */
+ bfd_boolean no_export;
+
/* Stuff only useful for archives. */
void *arelt_data;
struct bfd *my_archive; /* The containing archive BFD. */
bfd_error_handler_type bfd_get_error_handler (void);
-const char *bfd_archive_filename (bfd *);
-
long bfd_get_reloc_upper_bound (bfd *abfd, asection *sect);
long bfd_canonicalize_reloc
#define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
-#define bfd_get_synthetic_symtab(abfd, dynsyms, ret) \
- BFD_SEND (abfd, _bfd_get_synthetic_symtab, (abfd, dynsyms, ret))
+#define bfd_get_synthetic_symtab(abfd, count, syms, dyncount, dynsyms, ret) \
+ BFD_SEND (abfd, _bfd_get_synthetic_symtab, (abfd, count, syms, \
+ dyncount, dynsyms, ret))
#define bfd_get_dynamic_reloc_upper_bound(abfd) \
BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
NAME##_print_symbol, \
NAME##_get_symbol_info, \
NAME##_bfd_is_local_label_name, \
+ NAME##_bfd_is_target_special_symbol, \
NAME##_get_lineno, \
NAME##_find_nearest_line, \
NAME##_bfd_make_debug_symbol, \
(bfd *, struct bfd_symbol *, symbol_info *);
#define bfd_get_symbol_info(b,p,e) BFD_SEND (b, _bfd_get_symbol_info, (b,p,e))
bfd_boolean (*_bfd_is_local_label_name) (bfd *, const char *);
-
+ bfd_boolean (*_bfd_is_target_special_symbol) (bfd *, asymbol *);
alent * (*_get_lineno) (bfd *, struct bfd_symbol *);
bfd_boolean (*_bfd_find_nearest_line)
(bfd *, struct bfd_section *, struct bfd_symbol **, bfd_vma,
NAME##_bfd_gc_sections, \
NAME##_bfd_merge_sections, \
NAME##_bfd_is_group_section, \
- NAME##_bfd_discard_group
+ NAME##_bfd_discard_group, \
+ NAME##_section_already_linked \
int (*_bfd_sizeof_headers) (bfd *, bfd_boolean);
bfd_byte * (*_bfd_get_relocated_section_contents)
/* Discard members of a group. */
bfd_boolean (*_bfd_discard_group) (bfd *, struct bfd_section *);
+ /* Check if SEC has been already linked during a reloceatable or
+ final link. */
+ void (*_section_already_linked) (bfd *, struct bfd_section *);
+
/* Routines to handle dynamic symbols and relocs. */
#define BFD_JUMP_TABLE_DYNAMIC(NAME) \
NAME##_get_dynamic_symtab_upper_bound, \
(bfd *, struct bfd_symbol **);
/* Create synthetized symbols. */
long (*_bfd_get_synthetic_symtab)
- (bfd *, struct bfd_symbol **, struct bfd_symbol **);
+ (bfd *, long, struct bfd_symbol **, long, struct bfd_symbol **,
+ struct bfd_symbol **);
/* Get the amount of memory required to hold the dynamic relocs. */
long (*_bfd_get_dynamic_reloc_upper_bound) (bfd *);
/* Read in the dynamic relocs. */
#define bfd_link_split_section(abfd, sec) \
BFD_SEND (abfd, _bfd_link_split_section, (abfd, sec))
+void bfd_section_already_linked (bfd *abfd, asection *sec);
+
+#define bfd_section_already_linked(abfd, sec) \
+ BFD_SEND (abfd, _section_already_linked, (abfd, sec))
+
/* Extracted from simple.c. */
bfd_byte *bfd_simple_get_relocated_section_contents
(bfd *abfd, asection *sec, bfd_byte *outbuf, asymbol **symbol_table);
projects / deliverable / binutils-gdb.git / blobdiff