#define bfd_mach_avr5 5
#define bfd_mach_avr51 51
#define bfd_mach_avr6 6
+#define bfd_mach_avrtiny 100
#define bfd_mach_avrxmega1 101
#define bfd_mach_avrxmega2 102
#define bfd_mach_avrxmega3 103
BFD_RELOC_AVR_DIFF16,
BFD_RELOC_AVR_DIFF32,
+/* This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
+lds and sts instructions supported only tiny core. */
+ BFD_RELOC_AVR_LDS_STS_16,
+
+/* This is a 6 bit reloc for the AVR that stores an I/O register
+number for the IN and OUT instructions */
+ BFD_RELOC_AVR_PORT6,
+
+/* This is a 5 bit reloc for the AVR that stores an I/O register
+number for the SBIC, SBIS, SBI and CBI instructions */
+ BFD_RELOC_AVR_PORT5,
+
/* Renesas RL78 Relocations. */
BFD_RELOC_RL78_NEG8,
BFD_RELOC_RL78_NEG16,
struct bfd
{
- /* A unique identifier of the BFD */
- unsigned int id;
-
/* The filename the application opened the BFD with. */
const char *filename;
/* File modified time, if mtime_set is TRUE. */
long mtime;
- /* Reserved for an unimplemented file locking extension. */
- int ifd;
+ /* A unique identifier of the BFD */
+ unsigned int id;
/* The format which belongs to the BFD. (object, core, etc.) */
- bfd_format format;
+ ENUM_BITFIELD (bfd_format) format : 3;
/* The direction with which the BFD was opened. */
- enum bfd_direction direction;
+ ENUM_BITFIELD (bfd_direction) direction : 2;
/* Format_specific flags. */
- flagword flags;
+ flagword flags : 17;
/* Values that may appear in the flags field of a BFD. These also
appear in the object_flags field of the bfd_target structure, where
struct. */
#define BFD_IN_MEMORY 0x800
- /* The sections in this BFD specify a memory page. */
-#define HAS_LOAD_PAGE 0x1000
-
/* This BFD has been created by the linker and doesn't correspond
to any input file. */
-#define BFD_LINKER_CREATED 0x2000
+#define BFD_LINKER_CREATED 0x1000
/* This may be set before writing out a BFD to request that it
be written using values for UIDs, GIDs, timestamps, etc. that
will be consistent from run to run. */
-#define BFD_DETERMINISTIC_OUTPUT 0x4000
+#define BFD_DETERMINISTIC_OUTPUT 0x2000
/* Compress sections in this BFD. */
-#define BFD_COMPRESS 0x8000
+#define BFD_COMPRESS 0x4000
/* Decompress sections in this BFD. */
-#define BFD_DECOMPRESS 0x10000
+#define BFD_DECOMPRESS 0x8000
/* BFD is a dummy, for plugins. */
-#define BFD_PLUGIN 0x20000
+#define BFD_PLUGIN 0x10000
/* Flags bits to be saved in bfd_preserve_save. */
#define BFD_FLAGS_SAVED \
(BFD_IN_MEMORY | BFD_COMPRESS | BFD_DECOMPRESS | BFD_LINKER_CREATED \
| BFD_PLUGIN | BFD_TRADITIONAL_FORMAT | BFD_DETERMINISTIC_OUTPUT)
+ /* Is the file descriptor being cached? That is, can it be closed as
+ needed, and re-opened when accessed later? */
+ unsigned int cacheable : 1;
+
+ /* Marks whether there was a default target specified when the
+ BFD was opened. This is used to select which matching algorithm
+ to use to choose the back end. */
+ unsigned int target_defaulted : 1;
+
+ /* ... and here: (``once'' means at least once). */
+ unsigned int opened_once : 1;
+
+ /* Set if we have a locally maintained mtime value, rather than
+ getting it from the file each time. */
+ unsigned int mtime_set : 1;
+
+ /* Flag set if symbols from this BFD should not be exported. */
+ unsigned int no_export : 1;
+
+ /* Remember when output has begun, to stop strange things
+ from happening. */
+ unsigned int output_has_begun : 1;
+
+ /* Have archive map. */
+ unsigned int has_armap : 1;
+
+ /* Set if this is a thin archive. */
+ unsigned int is_thin_archive : 1;
+
+ /* Set if only required symbols should be added in the link hash table for
+ this object. Used by VMS linkers. */
+ unsigned int selective_search : 1;
+
+ /* Set if this is the linker output BFD. */
+ unsigned int is_linker_output : 1;
+
/* Currently my_archive is tested before adding origin to
anything. I believe that this can become always an add of
origin, with origin set to 0 for non archive files. */
/* The number of sections. */
unsigned int section_count;
+ /* A field used by _bfd_generic_link_add_archive_symbols. This will
+ be used only for archive elements. */
+ int archive_pass;
+
/* Stuff only useful for object files:
The start address. */
bfd_vma start_address;
- /* Used for input and output. */
- unsigned int symcount;
-
/* Symbol table for output BFD (with symcount entries).
Also used by the linker to cache input BFD symbols. */
struct bfd_symbol **outsymbols;
+ /* Used for input and output. */
+ unsigned int symcount;
+
/* Used for slurped dynamic symbol tables. */
unsigned int dynsymcount;
struct bfd_link_hash_table *hash;
} link;
- /* A field used by _bfd_generic_link_add_archive_symbols. This will
- be used only for archive elements. */
- int archive_pass;
-
/* Used by the back end to hold private data. */
union
{
struct objalloc *, but we use void * to avoid requiring the inclusion
of objalloc.h. */
void *memory;
-
- /* Is the file descriptor being cached? That is, can it be closed as
- needed, and re-opened when accessed later? */
- unsigned int cacheable : 1;
-
- /* Marks whether there was a default target specified when the
- BFD was opened. This is used to select which matching algorithm
- to use to choose the back end. */
- unsigned int target_defaulted : 1;
-
- /* ... and here: (``once'' means at least once). */
- unsigned int opened_once : 1;
-
- /* Set if we have a locally maintained mtime value, rather than
- getting it from the file each time. */
- unsigned int mtime_set : 1;
-
- /* Flag set if symbols from this BFD should not be exported. */
- unsigned int no_export : 1;
-
- /* Remember when output has begun, to stop strange things
- from happening. */
- unsigned int output_has_begun : 1;
-
- /* Have archive map. */
- unsigned int has_armap : 1;
-
- /* Set if this is a thin archive. */
- unsigned int is_thin_archive : 1;
-
- /* Set if only required symbols should be added in the link hash table for
- this object. Used by VMS linkers. */
- unsigned int selective_search : 1;
};
/* See note beside bfd_set_section_userdata. */
projects / deliverable / binutils-gdb.git / blobdiff