/* Generic BFD library interface and support routines.
- Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001
+ Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
/*
SECTION
CODE_FRAGMENT
.
-.struct _bfd
+.struct _bfd
.{
. {* The filename the application opened the BFD with. *}
-. CONST char *filename;
+. CONST char *filename;
.
. {* A pointer to the target jump table. *}
-. struct bfd_target *xvec;
+. const struct bfd_target *xvec;
.
. {* To avoid dragging too many header files into every file that
. includes `<<bfd.h>>', IOSTREAM has been declared as a "char
. *", and MTIME as a "long". Their correct types, to which they
. are cast when used, are "FILE *" and "time_t". The iostream
-. is the result of an fopen on the filename. *}
-. char *iostream;
+. is the result of an fopen on the filename. However, if the
+. BFD_IN_MEMORY flag is set, then iostream is actually a pointer
+. to a bfd_in_memory struct. *}
+. PTR iostream;
.
. {* Is the file descriptor being cached? That is, can it be closed as
. needed, and re-opened when accessed later? *}
. {* When a file is closed by the caching routines, BFD retains
. state information on the file here: *}
.
-. file_ptr where;
+. file_ptr where;
.
. {* and here: (``once'' means at least once) *}
.
.
. {* File modified time, if mtime_set is true: *}
.
-. long mtime;
+. long mtime;
.
. {* Reserved for an unimplemented file locking extension.*}
.
.
. {* Format_specific flags*}
.
-. flagword flags;
+. flagword flags;
.
. {* Currently my_archive is tested before adding origin to
. anything. I believe that this can become always an add of
. origin, with origin set to 0 for non archive files. *}
.
-. file_ptr origin;
+. file_ptr origin;
.
. {* Remember when output has begun, to stop strange things
. from happening. *}
. {* The number of sections *}
. unsigned int section_count;
.
-. {* Stuff only useful for object files:
+. {* Stuff only useful for object files:
. The start address. *}
. bfd_vma start_address;
.
. unsigned int symcount;
.
. {* Symbol table for output BFD (with symcount entries) *}
-. struct symbol_cache_entry **outsymbols;
+. struct symbol_cache_entry **outsymbols;
.
. {* Pointer to structure which contains architecture information*}
-. struct bfd_arch_info *arch_info;
+. const struct bfd_arch_info *arch_info;
.
. {* Stuff only useful for archives:*}
-. PTR arelt_data;
+. PTR arelt_data;
. struct _bfd *my_archive; {* The containing archive BFD. *}
. struct _bfd *next; {* The next BFD in the archive. *}
. struct _bfd *archive_head; {* The first BFD in the archive. *}
-. boolean has_armap;
+. boolean has_armap;
.
. {* A chain of BFD structures involved in a link. *}
. struct _bfd *link_next;
.
. {* Used by the back end to hold private data. *}
.
-. union
+. union
. {
. struct aout_data_struct *aout_data;
. struct artdata *aout_ar_data;
. struct _oasys_data *oasys_obj_data;
. struct _oasys_ar_data *oasys_ar_data;
. struct coff_tdata *coff_obj_data;
+. struct pe_tdata *pe_obj_data;
+. struct xcoff_tdata *xcoff_obj_data;
. struct ecoff_tdata *ecoff_obj_data;
. struct ieee_data_struct *ieee_data;
. struct ieee_ar_data_struct *ieee_ar_data;
. struct srec_data_struct *srec_data;
+. struct ihex_data_struct *ihex_data;
. struct tekhex_data_struct *tekhex_data;
. struct elf_obj_tdata *elf_obj_data;
. struct nlm_obj_tdata *nlm_obj_data;
. struct bout_data_struct *bout_data;
. struct sun_core_struct *sun_core_data;
+. struct sco5_core_struct *sco5_core_data;
. struct trad_core_struct *trad_core_data;
. struct som_data_struct *som_data;
. struct hpux_core_struct *hpux_core_data;
. struct sgi_core_struct *sgi_core_data;
. struct lynx_core_struct *lynx_core_data;
. struct osf_core_struct *osf_core_data;
+. struct cisco_core_struct *cisco_core_data;
+. struct versados_data_struct *versados_data;
+. struct netbsd_core_struct *netbsd_core_data;
. PTR any;
. } tdata;
-.
+.
. {* Used by the application to hold private data*}
. PTR usrdata;
.
-. {* Where all the allocated stuff under this BFD goes *}
-. struct obstack memory;
+. {* Where all the allocated stuff under this BFD goes. This is a
+. struct objalloc *, but we use PTR to avoid requiring the inclusion of
+. objalloc.h. *}
+. PTR memory;
.};
.
*/
#include "bfd.h"
#include "sysdep.h"
+
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include "libiberty.h"
#include "bfdlink.h"
#include "libbfd.h"
#include "coff/internal.h"
#include "libcoff.h"
#include "libecoff.h"
#undef obj_symbols
-#include "libelf.h"
+#include "elf-bfd.h"
+
+#include <ctype.h>
+\f
+/* provide storage for subsystem, stack and heap data which may have been
+ passed in on the command line. Ld puts this data into a bfd_link_info
+ struct which ultimately gets passed in to the bfd. When it arrives, copy
+ it to the following struct so that the data will be available in coffcode.h
+ where it is needed. The typedef's used are defined in bfd.h */
+\f
+/*
+SECTION
+ Error reporting
+
+ Most BFD functions return nonzero on success (check their
+ individual documentation for precise semantics). On an error,
+ they call <<bfd_set_error>> to set an error condition that callers
+ can check by calling <<bfd_get_error>>.
+ If that returns <<bfd_error_system_call>>, then check
+ <<errno>>.
+
+ The easiest way to report a BFD error to the user is to
+ use <<bfd_perror>>.
+
+SUBSECTION
+ Type <<bfd_error_type>>
-#undef strerror
-extern char *strerror();
+ The values returned by <<bfd_get_error>> are defined by the
+ enumerated type <<bfd_error_type>>.
-/** Error handling
- o - Most functions return nonzero on success (check doc for
- precise semantics); 0 or NULL on error.
- o - Internal errors are documented by the value of bfd_error.
- If that is system_call_error then check errno.
- o - The easiest way to report this to the user is to use bfd_perror.
+CODE_FRAGMENT
+.
+.typedef enum bfd_error
+.{
+. bfd_error_no_error = 0,
+. bfd_error_system_call,
+. bfd_error_invalid_target,
+. bfd_error_wrong_format,
+. bfd_error_invalid_operation,
+. bfd_error_no_memory,
+. bfd_error_no_symbols,
+. bfd_error_no_armap,
+. bfd_error_no_more_archived_files,
+. bfd_error_malformed_archive,
+. bfd_error_file_not_recognized,
+. bfd_error_file_ambiguously_recognized,
+. bfd_error_no_contents,
+. bfd_error_nonrepresentable_section,
+. bfd_error_no_debug_section,
+. bfd_error_bad_value,
+. bfd_error_file_truncated,
+. bfd_error_file_too_big,
+. bfd_error_invalid_error_code
+.} bfd_error_type;
+.
*/
-bfd_ec bfd_error = no_error;
+static bfd_error_type bfd_error = bfd_error_no_error;
CONST char *CONST bfd_errmsgs[] = {
- "No error",
- "System call error",
- "Invalid bfd target",
- "File in wrong format",
- "Invalid operation",
- "Memory exhausted",
- "No symbols",
- "No relocation info",
- "No more archived files",
- "Malformed archive",
- "Symbol not found",
- "File format not recognized",
- "File format is ambiguous",
- "Section has no contents",
- "Nonrepresentable section on output",
- "Symbol needs debug section which does not exist",
- "Bad value",
- "File truncated",
- "#<Invalid error code>"
+ N_("No error"),
+ N_("System call error"),
+ N_("Invalid bfd target"),
+ N_("File in wrong format"),
+ N_("Invalid operation"),
+ N_("Memory exhausted"),
+ N_("No symbols"),
+ N_("Archive has no index; run ranlib to add one"),
+ N_("No more archived files"),
+ N_("Malformed archive"),
+ N_("File format not recognized"),
+ N_("File format is ambiguous"),
+ N_("Section has no contents"),
+ N_("Nonrepresentable section on output"),
+ N_("Symbol needs debug section which does not exist"),
+ N_("Bad value"),
+ N_("File truncated"),
+ N_("File too big"),
+ N_("#<Invalid error code>")
};
+/*
+FUNCTION
+ bfd_get_error
+
+SYNOPSIS
+ bfd_error_type bfd_get_error (void);
+
+DESCRIPTION
+ Return the current BFD error condition.
+*/
+
+bfd_error_type
+bfd_get_error ()
+{
+ return bfd_error;
+}
+
+/*
+FUNCTION
+ bfd_set_error
+
+SYNOPSIS
+ void bfd_set_error (bfd_error_type error_tag);
+
+DESCRIPTION
+ Set the BFD error condition to be @var{error_tag}.
+*/
+
+void
+bfd_set_error (error_tag)
+ bfd_error_type error_tag;
+{
+ bfd_error = error_tag;
+}
+
+/*
+FUNCTION
+ bfd_errmsg
+
+SYNOPSIS
+ CONST char *bfd_errmsg (bfd_error_type error_tag);
+
+DESCRIPTION
+ Return a string describing the error @var{error_tag}, or
+ the system error if @var{error_tag} is <<bfd_error_system_call>>.
+*/
+
CONST char *
bfd_errmsg (error_tag)
- bfd_ec error_tag;
+ bfd_error_type error_tag;
{
#ifndef errno
extern int errno;
#endif
- if (error_tag == system_call_error)
- return strerror (errno);
+ if (error_tag == bfd_error_system_call)
+ return xstrerror (errno);
- if ((((int)error_tag <(int) no_error) ||
- ((int)error_tag > (int)invalid_error_code)))
- error_tag = invalid_error_code;/* sanity check */
+ if ((((int)error_tag <(int) bfd_error_no_error) ||
+ ((int)error_tag > (int)bfd_error_invalid_error_code)))
+ error_tag = bfd_error_invalid_error_code;/* sanity check */
- return bfd_errmsgs [(int)error_tag];
+ return _(bfd_errmsgs [(int)error_tag]);
}
+/*
+FUNCTION
+ bfd_perror
+
+SYNOPSIS
+ void bfd_perror (CONST char *message);
+
+DESCRIPTION
+ Print to the standard error stream a string describing the
+ last BFD error that occurred, or the last system error if
+ the last BFD error was a system call failure. If @var{message}
+ is non-NULL and non-empty, the error string printed is preceded
+ by @var{message}, a colon, and a space. It is followed by a newline.
+*/
+
void
-DEFUN(bfd_perror,(message),
- CONST char *message)
+bfd_perror (message)
+ CONST char *message;
{
- if (bfd_error == system_call_error)
- perror((char *)message); /* must be system error then... */
+ if (bfd_get_error () == bfd_error_system_call)
+ perror((char *)message); /* must be system error then... */
else {
if (message == NULL || *message == '\0')
- fprintf (stderr, "%s\n", bfd_errmsg (bfd_error));
+ fprintf (stderr, "%s\n", bfd_errmsg (bfd_get_error ()));
else
- fprintf (stderr, "%s: %s\n", message, bfd_errmsg (bfd_error));
+ fprintf (stderr, "%s: %s\n", message, bfd_errmsg (bfd_get_error ()));
}
}
- \f
-/** Symbols */
+/*
+SUBSECTION
+ BFD error handler
+
+ Some BFD functions want to print messages describing the
+ problem. They call a BFD error handler function. This
+ function may be overriden by the program.
+
+ The BFD error handler acts like printf.
+
+CODE_FRAGMENT
+.
+.typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...));
+.
+*/
+
+/* The program name used when printing BFD error messages. */
+
+static const char *_bfd_error_program_name;
+/* This is the default routine to handle BFD error messages. */
+
+#ifdef ANSI_PROTOTYPES
+
+static void _bfd_default_error_handler PARAMS ((const char *s, ...));
+
+static void
+_bfd_default_error_handler (const char *s, ...)
+{
+ va_list p;
+
+ if (_bfd_error_program_name != NULL)
+ fprintf (stderr, "%s: ", _bfd_error_program_name);
+ else
+ fprintf (stderr, "BFD: ");
+
+ va_start (p, s);
+
+ vfprintf (stderr, s, p);
+
+ va_end (p);
+
+ fprintf (stderr, "\n");
+}
+
+#else /* ! defined (ANSI_PROTOTYPES) */
+
+static void _bfd_default_error_handler ();
+
+static void
+_bfd_default_error_handler (va_alist)
+ va_dcl
+{
+ va_list p;
+ const char *s;
+
+ if (_bfd_error_program_name != NULL)
+ fprintf (stderr, "%s: ", _bfd_error_program_name);
+ else
+ fprintf (stderr, "BFD: ");
+
+ va_start (p);
+
+ s = va_arg (p, const char *);
+ vfprintf (stderr, s, p);
+
+ va_end (p);
+
+ fprintf (stderr, "\n");
+}
+
+#endif /* ! defined (ANSI_PROTOTYPES) */
+
+/* This is a function pointer to the routine which should handle BFD
+ error messages. It is called when a BFD routine encounters an
+ error for which it wants to print a message. Going through a
+ function pointer permits a program linked against BFD to intercept
+ the messages and deal with them itself. */
+
+bfd_error_handler_type _bfd_error_handler = _bfd_default_error_handler;
+
+/*
+FUNCTION
+ bfd_set_error_handler
+
+SYNOPSIS
+ bfd_error_handler_type bfd_set_error_handler (bfd_error_handler_type);
+
+DESCRIPTION
+ Set the BFD error handler function. Returns the previous
+ function.
+*/
+
+bfd_error_handler_type
+bfd_set_error_handler (pnew)
+ bfd_error_handler_type pnew;
+{
+ bfd_error_handler_type pold;
+
+ pold = _bfd_error_handler;
+ _bfd_error_handler = pnew;
+ return pold;
+}
+
+/*
+FUNCTION
+ bfd_set_error_program_name
+
+SYNOPSIS
+ void bfd_set_error_program_name (const char *);
+
+DESCRIPTION
+ Set the program name to use when printing a BFD error. This
+ is printed before the error message followed by a colon and
+ space. The string must not be changed after it is passed to
+ this function.
+*/
+
+void
+bfd_set_error_program_name (name)
+ const char *name;
+{
+ _bfd_error_program_name = name;
+}
+
+/*
+FUNCTION
+ bfd_get_error_handler
+
+SYNOPSIS
+ bfd_error_handler_type bfd_get_error_handler (void);
+
+DESCRIPTION
+ Return the BFD error handler function.
+*/
+
+bfd_error_handler_type
+bfd_get_error_handler ()
+{
+ return _bfd_error_handler;
+}
+\f
+/*
+SECTION
+ Symbols
+*/
/*
FUNCTION
bfd_get_reloc_upper_bound
SYNOPSIS
- unsigned int bfd_get_reloc_upper_bound(bfd *abfd, asection *sect);
+ long bfd_get_reloc_upper_bound(bfd *abfd, asection *sect);
DESCRIPTION
Return the number of bytes required to store the
relocation information associated with section @var{sect}
- attached to bfd @var{abfd}.
+ attached to bfd @var{abfd}. If an error occurs, return -1.
*/
-
-unsigned int
-DEFUN(bfd_get_reloc_upper_bound,(abfd, asect),
- bfd *abfd AND
- sec_ptr asect)
+long
+bfd_get_reloc_upper_bound (abfd, asect)
+ bfd *abfd;
+ sec_ptr asect;
{
if (abfd->format != bfd_object) {
- bfd_error = invalid_operation;
- return 0;
+ bfd_set_error (bfd_error_invalid_operation);
+ return -1;
}
return BFD_SEND (abfd, _get_reloc_upper_bound, (abfd, asect));
bfd_canonicalize_reloc
SYNOPSIS
- unsigned int bfd_canonicalize_reloc
+ long bfd_canonicalize_reloc
(bfd *abfd,
asection *sec,
arelent **loc,
information attached to @var{sec} into the internal canonical
form. Place the table into memory at @var{loc}, which has
been preallocated, usually by a call to
- <<bfd_get_reloc_upper_bound>>.
+ <<bfd_get_reloc_upper_bound>>. Returns the number of relocs, or
+ -1 on error.
The @var{syms} table is also needed for horrible internal magic
reasons.
-
*/
-unsigned int
-DEFUN(bfd_canonicalize_reloc,(abfd, asect, location, symbols),
- bfd *abfd AND
- sec_ptr asect AND
- arelent **location AND
- asymbol **symbols)
+long
+bfd_canonicalize_reloc (abfd, asect, location, symbols)
+ bfd *abfd;
+ sec_ptr asect;
+ arelent **location;
+ asymbol **symbols;
{
if (abfd->format != bfd_object) {
- bfd_error = invalid_operation;
- return 0;
+ bfd_set_error (bfd_error_invalid_operation);
+ return -1;
}
return BFD_SEND (abfd, _bfd_canonicalize_reloc,
(abfd, asect, location, symbols));
The argument @var{abfd} is ignored.
*/
-/*ARGSUSED*/
+
void
bfd_set_reloc (ignore_abfd, asect, location, count)
- bfd *ignore_abfd;
+ bfd *ignore_abfd ATTRIBUTE_UNUSED;
sec_ptr asect;
arelent **location;
unsigned int count;
{
- asect->orelocation = location;
+ asect->orelocation = location;
asect->reloc_count = count;
}
Set the flag word in the BFD @var{abfd} to the value @var{flags}.
Possible errors are:
- o <<wrong_format>> - The target bfd was not of object format.
- o <<invalid_operation>> - The target bfd was open for reading.
- o <<invalid_operation>> -
+ o <<bfd_error_wrong_format>> - The target bfd was not of object format.
+ o <<bfd_error_invalid_operation>> - The target bfd was open for reading.
+ o <<bfd_error_invalid_operation>> -
The flag word contained a bit which was not applicable to the
type of file. E.g., an attempt was made to set the <<D_PAGED>> bit
on a BFD format which does not support demand paging.
flagword flags;
{
if (abfd->format != bfd_object) {
- bfd_error = wrong_format;
+ bfd_set_error (bfd_error_wrong_format);
return false;
}
if (bfd_read_p (abfd)) {
- bfd_error = invalid_operation;
+ bfd_set_error (bfd_error_invalid_operation);
return false;
}
bfd_get_file_flags (abfd) = flags;
if ((flags & bfd_applicable_file_flags (abfd)) != flags) {
- bfd_error = invalid_operation;
+ bfd_set_error (bfd_error_invalid_operation);
return false;
}
}
void
-bfd_assert(file, line)
-char *file;
-int line;
+bfd_assert (file, line)
+ const char *file;
+ int line;
{
- fprintf(stderr, "bfd assertion fail %s:%d\n",file,line);
+ (*_bfd_error_handler) (_("bfd assertion fail %s:%d"), file, line);
}
+/* A more or less friendly abort message. In libbfd.h abort is
+ defined to call this function. */
+
+#ifndef EXIT_FAILURE
+#define EXIT_FAILURE 1
+#endif
+
+void
+_bfd_abort (file, line, fn)
+ const char *file;
+ int line;
+ const char *fn;
+{
+ if (fn != NULL)
+ (*_bfd_error_handler)
+ (_("BFD internal error, aborting at %s line %d in %s\n"),
+ file, line, fn);
+ else
+ (*_bfd_error_handler)
+ (_("BFD internal error, aborting at %s line %d\n"),
+ file, line);
+ (*_bfd_error_handler) (_("Please report this bug.\n"));
+ xexit (EXIT_FAILURE);
+}
+
+/*
+FUNCTION
+ bfd_get_arch_size
+
+SYNOPSIS
+ int bfd_get_arch_size (bfd *abfd);
+
+DESCRIPTION
+ Returns the architecture address size, in bits, as determined
+ by the object file's format. For ELF, this information is
+ included in the header.
+
+RETURNS
+ Returns the arch size in bits if known, <<-1>> otherwise.
+*/
+
+int
+bfd_get_arch_size (abfd)
+ bfd *abfd;
+{
+ if (abfd->xvec->flavour == bfd_target_elf_flavour)
+ return (get_elf_backend_data (abfd))->s->arch_size;
+
+ bfd_set_error (bfd_error_wrong_format);
+ return -1;
+}
+
+/*
+FUNCTION
+ bfd_get_sign_extend_vma
+
+SYNOPSIS
+ int bfd_get_sign_extend_vma (bfd *abfd);
+
+DESCRIPTION
+ Indicates if the target architecture "naturally" sign extends
+ an address. Some architectures implicitly sign extend address
+ values when they are converted to types larger than the size
+ of an address. For instance, bfd_get_start_address() will
+ return an address sign extended to fill a bfd_vma when this is
+ the case.
+
+RETURNS
+ Returns <<1>> if the target architecture is known to sign
+ extend addresses, <<0>> if the target architecture is known to
+ not sign extend addresses, and <<-1>> otherwise.
+*/
+
+int
+bfd_get_sign_extend_vma (abfd)
+ bfd *abfd;
+{
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+ return (get_elf_backend_data (abfd)->sign_extend_vma);
+
+ bfd_set_error (bfd_error_wrong_format);
+ return -1;
+}
/*
FUNCTION
return true;
}
-
/*
FUNCTION
bfd_get_mtime
Instead, we want to ask questions like "is this NNN byte sized
object I'm about to try read from file offset YYY reasonable?"
As as example of where we might do this, some object formats
- use string tables for which the first <<sizeof(long)>> bytes of the
+ use string tables for which the first <<sizeof (long)>> bytes of the
table contain the size of the table itself, including the size bytes.
If an application tries to read what it thinks is one of these
string tables, without some way to validate the size, and for
FILE *fp;
struct stat buf;
+ if ((abfd->flags & BFD_IN_MEMORY) != 0)
+ return ((struct bfd_in_memory *) abfd->iostream)->size;
+
fp = bfd_cache_lookup (abfd);
if (0 != fstat (fileno (fp), &buf))
return 0;
bfd_get_gp_size (abfd)
bfd *abfd;
{
- if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
- return ecoff_data (abfd)->gp_size;
- else if (abfd->xvec->flavour == bfd_target_elf_flavour)
- return elf_gp_size (abfd);
+ if (abfd->format == bfd_object)
+ {
+ if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
+ return ecoff_data (abfd)->gp_size;
+ else if (abfd->xvec->flavour == bfd_target_elf_flavour)
+ return elf_gp_size (abfd);
+ }
return 0;
}
bfd *abfd;
int i;
{
+ /* Don't try to set GP size on an archive or core file! */
+ if (abfd->format != bfd_object)
+ return;
if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
ecoff_data (abfd)->gp_size = i;
else if (abfd->xvec->flavour == bfd_target_elf_flavour)
elf_gp_size (abfd) = i;
}
+/* Get the GP value. This is an internal function used by some of the
+ relocation special_function routines on targets which support a GP
+ register. */
+
+bfd_vma
+_bfd_get_gp_value (abfd)
+ bfd *abfd;
+{
+ if (abfd->format == bfd_object)
+ {
+ if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
+ return ecoff_data (abfd)->gp;
+ else if (abfd->xvec->flavour == bfd_target_elf_flavour)
+ return elf_gp (abfd);
+ }
+ return 0;
+}
+
+/* Set the GP value. */
+
+void
+_bfd_set_gp_value (abfd, v)
+ bfd *abfd;
+ bfd_vma v;
+{
+ if (abfd->format != bfd_object)
+ return;
+ if (abfd->xvec->flavour == bfd_target_ecoff_flavour)
+ ecoff_data (abfd)->gp = v;
+ else if (abfd->xvec->flavour == bfd_target_elf_flavour)
+ elf_gp (abfd) = v;
+}
+
/*
FUNCTION
bfd_scan_vma
*/
bfd_vma
-DEFUN(bfd_scan_vma,(string, end, base),
- CONST char *string AND
- CONST char **end AND
- int base)
+bfd_scan_vma (string, end, base)
+ CONST char *string;
+ CONST char **end;
+ int base;
{
bfd_vma value;
int digit;
/* Let the host do it if possible. */
- if (sizeof(bfd_vma) <= sizeof(unsigned long))
- return (bfd_vma) strtoul (string, 0, base);
+ if (sizeof (bfd_vma) <= sizeof (unsigned long))
+ return (bfd_vma) strtoul (string, (char **) end, base);
/* A negative base makes no sense, and we only need to go as high as hex. */
if ((base < 0) || (base > 16))
(string[0] == '0') && ((string[1] == 'x') || (string[1] == 'X')))
string += 2;
/* XXX should we also skip over "0b" or "0B" if base is 2? */
-
+
/* Speed could be improved with a table like hex_value[] in gas. */
#define HEX_VALUE(c) \
- (isxdigit(c) ? \
- (isdigit(c) ? \
- (c - '0') : \
- (10 + c - (islower(c) ? 'a' : 'A'))) : \
- 42)
+ (isxdigit ((unsigned char) c) \
+ ? (isdigit ((unsigned char) c) \
+ ? (c - '0') \
+ : (10 + c - (islower ((unsigned char) c) ? 'a' : 'A'))) \
+ : 42)
for (value = 0; (digit = HEX_VALUE(*string)) < base; string++)
{
return value;
}
+/*
+FUNCTION
+ bfd_copy_private_bfd_data
+
+SYNOPSIS
+ boolean bfd_copy_private_bfd_data(bfd *ibfd, bfd *obfd);
+
+DESCRIPTION
+ Copy private BFD information from the BFD @var{ibfd} to the
+ the BFD @var{obfd}. Return <<true>> on success, <<false>> on error.
+ Possible error returns are:
+
+ o <<bfd_error_no_memory>> -
+ Not enough memory exists to create private data for @var{obfd}.
+
+.#define bfd_copy_private_bfd_data(ibfd, obfd) \
+. BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
+. (ibfd, obfd))
+
+*/
+
+/*
+FUNCTION
+ bfd_merge_private_bfd_data
+
+SYNOPSIS
+ boolean bfd_merge_private_bfd_data(bfd *ibfd, bfd *obfd);
+
+DESCRIPTION
+ Merge private BFD information from the BFD @var{ibfd} to the
+ the output file BFD @var{obfd} when linking. Return <<true>>
+ on success, <<false>> on error. Possible error returns are:
+
+ o <<bfd_error_no_memory>> -
+ Not enough memory exists to create private data for @var{obfd}.
+
+.#define bfd_merge_private_bfd_data(ibfd, obfd) \
+. BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
+. (ibfd, obfd))
+
+*/
+
+/*
+FUNCTION
+ bfd_set_private_flags
+
+SYNOPSIS
+ boolean bfd_set_private_flags(bfd *abfd, flagword flags);
+
+DESCRIPTION
+ Set private BFD flag information in the BFD @var{abfd}.
+ Return <<true>> on success, <<false>> on error. Possible error
+ returns are:
+
+ o <<bfd_error_no_memory>> -
+ Not enough memory exists to create private data for @var{obfd}.
+
+.#define bfd_set_private_flags(abfd, flags) \
+. BFD_SEND (abfd, _bfd_set_private_flags, \
+. (abfd, flags))
+
+*/
+
/*
FUNCTION
stuff
.#define bfd_stat_arch_elt(abfd, stat) \
. BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
.
+.#define bfd_update_armap_timestamp(abfd) \
+. BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
+.
.#define bfd_set_arch_mach(abfd, arch, mach)\
. BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
.
-.#define bfd_get_relocated_section_contents(abfd, link_info, link_order, data, relocateable, symbols) \
-. BFD_SEND (abfd, _bfd_get_relocated_section_contents, \
-. (abfd, link_info, link_order, data, relocateable, symbols))
-.
-.#define bfd_relax_section(abfd, section, link_info, symbols) \
-. BFD_SEND (abfd, _bfd_relax_section, \
-. (abfd, section, link_info, symbols))
+.#define bfd_relax_section(abfd, section, link_info, again) \
+. BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
+.
+.#define bfd_gc_sections(abfd, link_info) \
+. BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
+.
+.#define bfd_merge_sections(abfd, link_info) \
+. BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info))
.
.#define bfd_link_hash_table_create(abfd) \
. BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
.#define bfd_final_link(abfd, info) \
. BFD_SEND (abfd, _bfd_final_link, (abfd, info))
.
+.#define bfd_free_cached_info(abfd) \
+. BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
+.
+.#define bfd_get_dynamic_symtab_upper_bound(abfd) \
+. BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
+.
+.#define bfd_print_private_bfd_data(abfd, file)\
+. BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file))
+.
+.#define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
+. BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
+.
+.#define bfd_get_dynamic_reloc_upper_bound(abfd) \
+. BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
+.
+.#define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
+. BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
+.
+.extern bfd_byte *bfd_get_relocated_section_contents
+. PARAMS ((bfd *, struct bfd_link_info *,
+. struct bfd_link_order *, bfd_byte *,
+. boolean, asymbol **));
+.
*/
+
+bfd_byte *
+bfd_get_relocated_section_contents (abfd, link_info, link_order, data,
+ relocateable, symbols)
+ bfd *abfd;
+ struct bfd_link_info *link_info;
+ struct bfd_link_order *link_order;
+ bfd_byte *data;
+ boolean relocateable;
+ asymbol **symbols;
+{
+ bfd *abfd2;
+ bfd_byte *(*fn) PARAMS ((bfd *, struct bfd_link_info *,
+ struct bfd_link_order *, bfd_byte *, boolean,
+ asymbol **));
+
+ if (link_order->type == bfd_indirect_link_order)
+ {
+ abfd2 = link_order->u.indirect.section->owner;
+ if (abfd2 == 0)
+ abfd2 = abfd;
+ }
+ else
+ abfd2 = abfd;
+ fn = abfd2->xvec->_bfd_get_relocated_section_contents;
+
+ return (*fn) (abfd, link_info, link_order, data, relocateable, symbols);
+}
+
+/* Record information about an ELF program header. */
+
+boolean
+bfd_record_phdr (abfd, type, flags_valid, flags, at_valid, at,
+ includes_filehdr, includes_phdrs, count, secs)
+ bfd *abfd;
+ unsigned long type;
+ boolean flags_valid;
+ flagword flags;
+ boolean at_valid;
+ bfd_vma at;
+ boolean includes_filehdr;
+ boolean includes_phdrs;
+ unsigned int count;
+ asection **secs;
+{
+ struct elf_segment_map *m, **pm;
+
+ if (bfd_get_flavour (abfd) != bfd_target_elf_flavour)
+ return true;
+
+ m = ((struct elf_segment_map *)
+ bfd_alloc (abfd,
+ (sizeof (struct elf_segment_map)
+ + ((size_t) count - 1) * sizeof (asection *))));
+ if (m == NULL)
+ return false;
+
+ m->next = NULL;
+ m->p_type = type;
+ m->p_flags = flags;
+ m->p_paddr = at;
+ m->p_flags_valid = flags_valid;
+ m->p_paddr_valid = at_valid;
+ m->includes_filehdr = includes_filehdr;
+ m->includes_phdrs = includes_phdrs;
+ m->count = count;
+ if (count > 0)
+ memcpy (m->sections, secs, count * sizeof (asection *));
+
+ for (pm = &elf_tdata (abfd)->segment_map; *pm != NULL; pm = &(*pm)->next)
+ ;
+ *pm = m;
+
+ return true;
+}
projects / deliverable / binutils-gdb.git / blobdiff