/* Generic BFD library interface and support routines.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
Written by Cygnus Support.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
/*
SECTION
. {* A pointer to the target jump table. *}
. const struct bfd_target *xvec;
.
-. {* To avoid dragging too many header files into every file that
-. includes `<<bfd.h>>', IOSTREAM has been declared as a "char *",
-. and MTIME as a "long". Their correct types, to which they
-. are cast when used, are "FILE *" and "time_t". The iostream
-. is the result of an fopen on the filename. However, if the
-. BFD_IN_MEMORY flag is set, then iostream is actually a pointer
-. to a bfd_in_memory struct. *}
-. PTR iostream;
-.
-. {* Is the file descriptor being cached? That is, can it be closed as
-. needed, and re-opened when accessed later? *}
-. bfd_boolean cacheable;
-.
-. {* Marks whether there was a default target specified when the
-. BFD was opened. This is used to select which matching algorithm
-. to use to choose the back end. *}
-. bfd_boolean target_defaulted;
+. {* The IOSTREAM, and corresponding IO vector that provide access
+. to the file backing the BFD. *}
+. void *iostream;
+. const struct bfd_iovec *iovec;
.
. {* The caching routines use these to maintain a
. least-recently-used list of BFDs. *}
. state information on the file here... *}
. ufile_ptr where;
.
-. {* ... and here: (``once'' means at least once). *}
-. bfd_boolean opened_once;
-.
-. {* Set if we have a locally maintained mtime value, rather than
-. getting it from the file each time. *}
-. bfd_boolean mtime_set;
-.
. {* File modified time, if mtime_set is TRUE. *}
. long mtime;
.
. {* Format_specific flags. *}
. flagword flags;
.
+. {* Values that may appear in the flags field of a BFD. These also
+. appear in the object_flags field of the bfd_target structure, where
+. they indicate the set of flags used by that backend (not all flags
+. are meaningful for all object file formats) (FIXME: at the moment,
+. the object_flags values have mostly just been copied from backend
+. to another, and are not necessarily correct). *}
+.
+.#define BFD_NO_FLAGS 0x00
+.
+. {* BFD contains relocation entries. *}
+.#define HAS_RELOC 0x01
+.
+. {* BFD is directly executable. *}
+.#define EXEC_P 0x02
+.
+. {* BFD has line number information (basically used for F_LNNO in a
+. COFF header). *}
+.#define HAS_LINENO 0x04
+.
+. {* BFD has debugging information. *}
+.#define HAS_DEBUG 0x08
+.
+. {* BFD has symbols. *}
+.#define HAS_SYMS 0x10
+.
+. {* BFD has local symbols (basically used for F_LSYMS in a COFF
+. header). *}
+.#define HAS_LOCALS 0x20
+.
+. {* BFD is a dynamic object. *}
+.#define DYNAMIC 0x40
+.
+. {* Text section is write protected (if D_PAGED is not set, this is
+. like an a.out NMAGIC file) (the linker sets this by default, but
+. clears it for -r or -N). *}
+.#define WP_TEXT 0x80
+.
+. {* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
+. linker sets this by default, but clears it for -r or -n or -N). *}
+.#define D_PAGED 0x100
+.
+. {* BFD is relaxable (this means that bfd_relax_section may be able to
+. do something) (sometimes bfd_relax_section can do something even if
+. this is not set). *}
+.#define BFD_IS_RELAXABLE 0x200
+.
+. {* This may be set before writing out a BFD to request using a
+. traditional format. For example, this is used to request that when
+. writing out an a.out object the symbols not be hashed to eliminate
+. duplicates. *}
+.#define BFD_TRADITIONAL_FORMAT 0x400
+.
+. {* This flag indicates that the BFD contents are actually cached
+. in memory. If this is set, iostream points to a bfd_in_memory
+. struct. *}
+.#define BFD_IN_MEMORY 0x800
+.
+. {* The sections in this BFD specify a memory page. *}
+.#define HAS_LOAD_PAGE 0x1000
+.
+. {* This BFD has been created by the linker and doesn't correspond
+. to any input file. *}
+.#define BFD_LINKER_CREATED 0x2000
+.
. {* Currently my_archive is tested before adding origin to
. anything. I believe that this can become always an add of
. origin, with origin set to 0 for non archive files. *}
. ufile_ptr origin;
.
-. {* Remember when output has begun, to stop strange things
-. from happening. *}
-. bfd_boolean output_has_begun;
+. {* The origin in the archive of the proxy entry. This will
+. normally be the same as origin, except for thin archives,
+. when it will contain the current offset of the proxy in the
+. thin archive rather than the offset of the bfd in its actual
+. container. *}
+. ufile_ptr proxy_origin;
.
. {* A hash table for section names. *}
. struct bfd_hash_table section_htab;
.
. {* Pointer to linked list of sections. *}
-. struct sec *sections;
+. struct bfd_section *sections;
.
-. {* The place where we add to the section list. *}
-. struct sec **section_tail;
+. {* The last section on the section list. *}
+. struct bfd_section *section_last;
.
. {* The number of sections. *}
. unsigned int section_count;
. {* Used for input and output. *}
. unsigned int symcount;
.
-. {* Symbol table for output BFD (with symcount entries). *}
-. struct symbol_cache_entry **outsymbols;
+. {* Symbol table for output BFD (with symcount entries).
+. Also used by the linker to cache input BFD symbols. *}
+. struct bfd_symbol **outsymbols;
.
. {* Used for slurped dynamic symbol tables. *}
. unsigned int dynsymcount;
. const struct bfd_arch_info *arch_info;
.
. {* Stuff only useful for archives. *}
-. PTR arelt_data;
+. void *arelt_data;
. struct bfd *my_archive; {* The containing archive BFD. *}
-. struct bfd *next; {* The next BFD in the archive. *}
+. struct bfd *archive_next; {* The next BFD in the archive. *}
. struct bfd *archive_head; {* The first BFD in the archive. *}
-. bfd_boolean has_armap;
+. struct bfd *nested_archives; {* List of nested archive in a flattened
+. thin archive. *}
.
. {* A chain of BFD structures involved in a link. *}
. struct bfd *link_next;
. struct bfd_pef_data_struct *pef_data;
. struct bfd_pef_xlib_data_struct *pef_xlib_data;
. struct bfd_sym_data_struct *sym_data;
-. PTR any;
+. void *any;
. }
. tdata;
.
. {* Used by the application to hold private data. *}
-. PTR usrdata;
+. void *usrdata;
.
. {* Where all the allocated stuff under this BFD goes. This is a
-. struct objalloc *, but we use PTR to avoid requiring the inclusion of
-. objalloc.h. *}
-. PTR memory;
+. struct objalloc *, but we use void * to avoid requiring the inclusion
+. of objalloc.h. *}
+. void *memory;
+.
+. {* Is the file descriptor being cached? That is, can it be closed as
+. needed, and re-opened when accessed later? *}
+. unsigned int cacheable : 1;
+.
+. {* Marks whether there was a default target specified when the
+. BFD was opened. This is used to select which matching algorithm
+. to use to choose the back end. *}
+. unsigned int target_defaulted : 1;
+.
+. {* ... and here: (``once'' means at least once). *}
+. unsigned int opened_once : 1;
+.
+. {* Set if we have a locally maintained mtime value, rather than
+. getting it from the file each time. *}
+. unsigned int mtime_set : 1;
+.
+. {* Flag set if symbols from this BFD should not be exported. *}
+. unsigned int no_export : 1;
+.
+. {* Remember when output has begun, to stop strange things
+. from happening. *}
+. unsigned int output_has_begun : 1;
+.
+. {* Have archive map. *}
+. unsigned int has_armap : 1;
+.
+. {* Set if this is a thin archive. *}
+. unsigned int is_thin_archive : 1;
.};
.
*/
-#include "bfd.h"
-#include "bfdver.h"
#include "sysdep.h"
-
-#ifdef ANSI_PROTOTYPES
#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
+#include "bfd.h"
+#include "bfdver.h"
#include "libiberty.h"
+#include "demangle.h"
#include "safe-ctype.h"
#include "bfdlink.h"
#include "libbfd.h"
#include "libecoff.h"
#undef obj_symbols
#include "elf-bfd.h"
+
+#ifndef EXIT_FAILURE
+#define EXIT_FAILURE 1
+#endif
+
\f
/* provide storage for subsystem, stack and heap data which may have been
passed in on the command line. Ld puts this data into a bfd_link_info
. bfd_error_bad_value,
. bfd_error_file_truncated,
. bfd_error_file_too_big,
+. bfd_error_on_input,
. bfd_error_invalid_error_code
.}
.bfd_error_type;
*/
static bfd_error_type bfd_error = bfd_error_no_error;
+static bfd *input_bfd = NULL;
+static bfd_error_type input_error = bfd_error_no_error;
const char *const bfd_errmsgs[] =
{
N_("Bad value"),
N_("File truncated"),
N_("File too big"),
+ N_("Error reading %s: %s"),
N_("#<Invalid error code>")
};
*/
bfd_error_type
-bfd_get_error ()
+bfd_get_error (void)
{
return bfd_error;
}
bfd_set_error
SYNOPSIS
- void bfd_set_error (bfd_error_type error_tag);
+ void bfd_set_error (bfd_error_type error_tag, ...);
DESCRIPTION
Set the BFD error condition to be @var{error_tag}.
+ If @var{error_tag} is bfd_error_on_input, then this function
+ takes two more parameters, the input bfd where the error
+ occurred, and the bfd_error_type error.
*/
void
-bfd_set_error (error_tag)
- bfd_error_type error_tag;
+bfd_set_error (bfd_error_type error_tag, ...)
{
bfd_error = error_tag;
+ if (error_tag == bfd_error_on_input)
+ {
+ /* This is an error that occurred during bfd_close when
+ writing an archive, but on one of the input files. */
+ va_list ap;
+
+ va_start (ap, error_tag);
+ input_bfd = va_arg (ap, bfd *);
+ input_error = va_arg (ap, int);
+ if (input_error >= bfd_error_on_input)
+ abort ();
+ va_end (ap);
+ }
}
/*
*/
const char *
-bfd_errmsg (error_tag)
- bfd_error_type error_tag;
+bfd_errmsg (bfd_error_type error_tag)
{
#ifndef errno
extern int errno;
#endif
+ if (error_tag == bfd_error_on_input)
+ {
+ char *buf;
+ const char *msg = bfd_errmsg (input_error);
+
+ if (asprintf (&buf, _(bfd_errmsgs [error_tag]), input_bfd->filename, msg)
+ != -1)
+ return buf;
+
+ /* Ick, what to do on out of memory? */
+ return msg;
+ }
+
if (error_tag == bfd_error_system_call)
return xstrerror (errno);
- if ((((int) error_tag < (int) bfd_error_no_error) ||
- ((int) error_tag > (int) bfd_error_invalid_error_code)))
- error_tag = bfd_error_invalid_error_code;/* sanity check */
+ if (error_tag > bfd_error_invalid_error_code)
+ error_tag = bfd_error_invalid_error_code; /* sanity check */
- return _(bfd_errmsgs [(int)error_tag]);
+ return _(bfd_errmsgs [error_tag]);
}
/*
*/
void
-bfd_perror (message)
- const char *message;
+bfd_perror (const char *message)
{
- if (bfd_get_error () == bfd_error_system_call)
- /* Must be a system error then. */
- perror ((char *)message);
+ if (message == NULL || *message == '\0')
+ fprintf (stderr, "%s\n", bfd_errmsg (bfd_get_error ()));
else
- {
- if (message == NULL || *message == '\0')
- fprintf (stderr, "%s\n", bfd_errmsg (bfd_get_error ()));
- else
- fprintf (stderr, "%s: %s\n", message, bfd_errmsg (bfd_get_error ()));
- }
+ fprintf (stderr, "%s: %s\n", message, bfd_errmsg (bfd_get_error ()));
}
/*
Some BFD functions want to print messages describing the
problem. They call a BFD error handler function. This
- function may be overriden by the program.
+ function may be overridden by the program.
The BFD error handler acts like printf.
CODE_FRAGMENT
.
-.typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...));
+.typedef void (*bfd_error_handler_type) (const char *, ...);
.
*/
static const char *_bfd_error_program_name;
-/* This is the default routine to handle BFD error messages. */
+/* This is the default routine to handle BFD error messages.
+ Like fprintf (stderr, ...), but also handles some extra format specifiers.
-static void _bfd_default_error_handler PARAMS ((const char *s, ...));
+ %A section name from section. For group components, print group name too.
+ %B file name from bfd. For archive components, prints archive too.
-static void
-_bfd_default_error_handler VPARAMS ((const char *s, ...))
+ Note - because these two extra format specifiers require special handling
+ they are scanned for and processed in this function, before calling
+ vfprintf. This means that the *arguments* for these format specifiers
+ must be the first ones in the variable argument list, regardless of where
+ the specifiers appear in the format string. Thus for example calling
+ this function with a format string of:
+
+ "blah %s blah %A blah %d blah %B"
+
+ would involve passing the arguments as:
+
+ "blah %s blah %A blah %d blah %B",
+ asection_for_the_%A,
+ bfd_for_the_%B,
+ string_for_the_%s,
+ integer_for_the_%d);
+ */
+
+void
+_bfd_default_error_handler (const char *fmt, ...)
{
+ va_list ap;
+ char *bufp;
+ const char *new_fmt, *p;
+ size_t avail = 1000;
+ char buf[1000];
+
+ /* PR 4992: Don't interrupt output being sent to stdout. */
+ fflush (stdout);
+
if (_bfd_error_program_name != NULL)
fprintf (stderr, "%s: ", _bfd_error_program_name);
else
fprintf (stderr, "BFD: ");
- VA_OPEN (p, s);
- VA_FIXEDARG (p, const char *, s);
- vfprintf (stderr, s, p);
- VA_CLOSE (p);
+ va_start (ap, fmt);
+ new_fmt = fmt;
+ bufp = buf;
+
+ /* Reserve enough space for the existing format string. */
+ avail -= strlen (fmt) + 1;
+ if (avail > 1000)
+ _exit (EXIT_FAILURE);
- fprintf (stderr, "\n");
+ p = fmt;
+ while (1)
+ {
+ char *q;
+ size_t len, extra, trim;
+
+ p = strchr (p, '%');
+ if (p == NULL || p[1] == '\0')
+ {
+ if (new_fmt == buf)
+ {
+ len = strlen (fmt);
+ memcpy (bufp, fmt, len + 1);
+ }
+ break;
+ }
+
+ if (p[1] == 'A' || p[1] == 'B')
+ {
+ len = p - fmt;
+ memcpy (bufp, fmt, len);
+ bufp += len;
+ fmt = p + 2;
+ new_fmt = buf;
+
+ /* If we run out of space, tough, you lose your ridiculously
+ long file or section name. It's not safe to try to alloc
+ memory here; We might be printing an out of memory message. */
+ if (avail == 0)
+ {
+ *bufp++ = '*';
+ *bufp++ = '*';
+ *bufp = '\0';
+ }
+ else
+ {
+ if (p[1] == 'B')
+ {
+ bfd *abfd = va_arg (ap, bfd *);
+
+ if (abfd == NULL)
+ /* Invoking %B with a null bfd pointer is an internal error. */
+ abort ();
+ else if (abfd->my_archive)
+ snprintf (bufp, avail, "%s(%s)",
+ abfd->my_archive->filename, abfd->filename);
+ else
+ snprintf (bufp, avail, "%s", abfd->filename);
+ }
+ else
+ {
+ asection *sec = va_arg (ap, asection *);
+ bfd *abfd;
+ const char *group = NULL;
+ struct coff_comdat_info *ci;
+
+ if (sec == NULL)
+ /* Invoking %A with a null section pointer is an internal error. */
+ abort ();
+ abfd = sec->owner;
+ if (abfd != NULL
+ && bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && elf_next_in_group (sec) != NULL
+ && (sec->flags & SEC_GROUP) == 0)
+ group = elf_group_name (sec);
+ else if (abfd != NULL
+ && bfd_get_flavour (abfd) == bfd_target_coff_flavour
+ && (ci = bfd_coff_get_comdat_section (sec->owner,
+ sec)) != NULL)
+ group = ci->name;
+ if (group != NULL)
+ snprintf (bufp, avail, "%s[%s]", sec->name, group);
+ else
+ snprintf (bufp, avail, "%s", sec->name);
+ }
+ len = strlen (bufp);
+ avail = avail - len + 2;
+
+ /* We need to replace any '%' we printed by "%%".
+ First count how many. */
+ q = bufp;
+ bufp += len;
+ extra = 0;
+ while ((q = strchr (q, '%')) != NULL)
+ {
+ ++q;
+ ++extra;
+ }
+
+ /* If there isn't room, trim off the end of the string. */
+ q = bufp;
+ bufp += extra;
+ if (extra > avail)
+ {
+ trim = extra - avail;
+ bufp -= trim;
+ do
+ {
+ if (*--q == '%')
+ --extra;
+ }
+ while (--trim != 0);
+ *q = '\0';
+ avail = extra;
+ }
+ avail -= extra;
+
+ /* Now double all '%' chars, shuffling the string as we go. */
+ while (extra != 0)
+ {
+ while ((q[extra] = *q) != '%')
+ --q;
+ q[--extra] = '%';
+ --q;
+ }
+ }
+ }
+ p = p + 2;
+ }
+
+ vfprintf (stderr, new_fmt, ap);
+ va_end (ap);
+
+ putc ('\n', stderr);
}
/* This is a function pointer to the routine which should handle BFD
*/
bfd_error_handler_type
-bfd_set_error_handler (pnew)
- bfd_error_handler_type pnew;
+bfd_set_error_handler (bfd_error_handler_type pnew)
{
bfd_error_handler_type pold;
*/
void
-bfd_set_error_program_name (name)
- const char *name;
+bfd_set_error_program_name (const char *name)
{
_bfd_error_program_name = name;
}
*/
bfd_error_handler_type
-bfd_get_error_handler ()
+bfd_get_error_handler (void)
{
return _bfd_error_handler;
}
-
-/*
-FUNCTION
- bfd_archive_filename
-
-SYNOPSIS
- const char *bfd_archive_filename (bfd *);
-
-DESCRIPTION
- For a BFD that is a component of an archive, returns a string
- with both the archive name and file name. For other BFDs, just
- returns the file name.
-*/
-
-const char *
-bfd_archive_filename (abfd)
- bfd *abfd;
-{
- if (abfd->my_archive)
- {
- static size_t curr = 0;
- static char *buf;
- size_t needed;
-
- needed = (strlen (bfd_get_filename (abfd->my_archive))
- + strlen (bfd_get_filename (abfd)) + 3);
- if (needed > curr)
- {
- if (curr)
- free (buf);
- curr = needed + (needed >> 1);
- buf = bfd_malloc ((bfd_size_type) curr);
- /* If we can't malloc, fail safe by returning just the file
- name. This function is only used when building error
- messages. */
- if (!buf)
- {
- curr = 0;
- return bfd_get_filename (abfd);
- }
- }
- sprintf (buf, "%s(%s)", bfd_get_filename (abfd->my_archive),
- bfd_get_filename (abfd));
- return buf;
- }
- else
- return bfd_get_filename (abfd);
-}
\f
/*
SECTION
- Symbols
+ Miscellaneous
+
+SUBSECTION
+ Miscellaneous functions
*/
/*
*/
long
-bfd_get_reloc_upper_bound (abfd, asect)
- bfd *abfd;
- sec_ptr asect;
+bfd_get_reloc_upper_bound (bfd *abfd, sec_ptr asect)
{
if (abfd->format != bfd_object)
{
SYNOPSIS
long bfd_canonicalize_reloc
- (bfd *abfd,
- asection *sec,
- arelent **loc,
- asymbol **syms);
+ (bfd *abfd, asection *sec, arelent **loc, asymbol **syms);
DESCRIPTION
Call the back end associated with the open BFD
*/
long
-bfd_canonicalize_reloc (abfd, asect, location, symbols)
- bfd *abfd;
- sec_ptr asect;
- arelent **location;
- asymbol **symbols;
+bfd_canonicalize_reloc (bfd *abfd,
+ sec_ptr asect,
+ arelent **location,
+ asymbol **symbols)
{
if (abfd->format != bfd_object)
{
*/
void
-bfd_set_reloc (ignore_abfd, asect, location, count)
- bfd *ignore_abfd ATTRIBUTE_UNUSED;
- sec_ptr asect;
- arelent **location;
- unsigned int count;
+bfd_set_reloc (bfd *ignore_abfd ATTRIBUTE_UNUSED,
+ sec_ptr asect,
+ arelent **location,
+ unsigned int count)
{
asect->orelocation = location;
asect->reloc_count = count;
*/
bfd_boolean
-bfd_set_file_flags (abfd, flags)
- bfd *abfd;
- flagword flags;
+bfd_set_file_flags (bfd *abfd, flagword flags)
{
if (abfd->format != bfd_object)
{
}
void
-bfd_assert (file, line)
- const char *file;
- int line;
+bfd_assert (const char *file, int line)
{
(*_bfd_error_handler) (_("BFD %s assertion fail %s:%d"),
BFD_VERSION_STRING, file, line);
/* A more or less friendly abort message. In libbfd.h abort is
defined to call this function. */
-#ifndef EXIT_FAILURE
-#define EXIT_FAILURE 1
-#endif
-
void
-_bfd_abort (file, line, fn)
- const char *file;
- int line;
- const char *fn;
+_bfd_abort (const char *file, int line, const char *fn)
{
if (fn != NULL)
(*_bfd_error_handler)
(_("BFD %s internal error, aborting at %s line %d\n"),
BFD_VERSION_STRING, file, line);
(*_bfd_error_handler) (_("Please report this bug.\n"));
- xexit (EXIT_FAILURE);
+ _exit (EXIT_FAILURE);
}
/*
*/
int
-bfd_get_arch_size (abfd)
- bfd *abfd;
+bfd_get_arch_size (bfd *abfd)
{
if (abfd->xvec->flavour == bfd_target_elf_flavour)
- return (get_elf_backend_data (abfd))->s->arch_size;
+ return get_elf_backend_data (abfd)->s->arch_size;
return -1;
}
*/
int
-bfd_get_sign_extend_vma (abfd)
- bfd *abfd;
+bfd_get_sign_extend_vma (bfd *abfd)
{
char *name;
if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
- return (get_elf_backend_data (abfd)->sign_extend_vma);
+ return get_elf_backend_data (abfd)->sign_extend_vma;
name = bfd_get_target (abfd);
- /* Return a proper value for DJGPP COFF (an x86 COFF variant).
+ /* Return a proper value for DJGPP & PE COFF.
This function is required for DWARF2 support, but there is
no place to store this information in the COFF back end.
Should enough other COFF targets add support for DWARF2,
a place will have to be found. Until then, this hack will do. */
- if (strncmp (name, "coff-go32", sizeof ("coff-go32") - 1) == 0)
+ if (CONST_STRNEQ (name, "coff-go32")
+ || strcmp (name, "pe-i386") == 0
+ || strcmp (name, "pei-i386") == 0
+ || strcmp (name, "pe-x86-64") == 0
+ || strcmp (name, "pei-x86-64") == 0
+ || strcmp (name, "pe-arm-wince-little") == 0
+ || strcmp (name, "pei-arm-wince-little") == 0)
return 1;
+ if (CONST_STRNEQ (name, "mach-o"))
+ return 0;
+
bfd_set_error (bfd_error_wrong_format);
return -1;
}
*/
bfd_boolean
-bfd_set_start_address (abfd, vma)
- bfd *abfd;
- bfd_vma vma;
+bfd_set_start_address (bfd *abfd, bfd_vma vma)
{
abfd->start_address = vma;
return TRUE;
*/
unsigned int
-bfd_get_gp_size (abfd)
- bfd *abfd;
+bfd_get_gp_size (bfd *abfd)
{
if (abfd->format == bfd_object)
{
*/
void
-bfd_set_gp_size (abfd, i)
- bfd *abfd;
- unsigned int i;
+bfd_set_gp_size (bfd *abfd, unsigned int i)
{
/* Don't try to set GP size on an archive or core file! */
if (abfd->format != bfd_object)
register. */
bfd_vma
-_bfd_get_gp_value (abfd)
- bfd *abfd;
+_bfd_get_gp_value (bfd *abfd)
{
if (! abfd)
return 0;
/* Set the GP value. */
void
-_bfd_set_gp_value (abfd, v)
- bfd *abfd;
- bfd_vma v;
+_bfd_set_gp_value (bfd *abfd, bfd_vma v)
{
if (! abfd)
- BFD_FAIL ();
+ abort ();
if (abfd->format != bfd_object)
return;
*/
bfd_vma
-bfd_scan_vma (string, end, base)
- const char *string;
- const char **end;
- int base;
+bfd_scan_vma (const char *string, const char **end, int base)
{
bfd_vma value;
bfd_vma cutoff;
/* Let the host do it if possible. */
if (sizeof (bfd_vma) <= sizeof (unsigned long))
- return (bfd_vma) strtoul (string, (char **) end, base);
+ return strtoul (string, (char **) end, base);
+
+#ifdef HAVE_STRTOULL
+ if (sizeof (bfd_vma) <= sizeof (unsigned long long))
+ return strtoull (string, (char **) end, base);
+#endif
if (base == 0)
{
return value;
}
+/*
+FUNCTION
+ bfd_copy_private_header_data
+
+SYNOPSIS
+ bfd_boolean bfd_copy_private_header_data (bfd *ibfd, bfd *obfd);
+
+DESCRIPTION
+ Copy private BFD header information from the BFD @var{ibfd} to the
+ the BFD @var{obfd}. This copies information that may require
+ sections to exist, but does not require symbol tables. Return
+ <<true>> on success, <<false>> on error.
+ Possible error returns are:
+
+ o <<bfd_error_no_memory>> -
+ Not enough memory exists to create private data for @var{obfd}.
+
+.#define bfd_copy_private_header_data(ibfd, obfd) \
+. BFD_SEND (obfd, _bfd_copy_private_header_data, \
+. (ibfd, obfd))
+
+*/
+
/*
FUNCTION
bfd_copy_private_bfd_data
DESCRIPTION
The following functions exist but have not yet been documented.
-.#define bfd_sizeof_headers(abfd, reloc) \
-. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
+.#define bfd_sizeof_headers(abfd, info) \
+. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, info))
.
.#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
. BFD_SEND (abfd, _bfd_find_nearest_line, \
. (abfd, sec, syms, off, file, func, line))
.
+.#define bfd_find_line(abfd, syms, sym, file, line) \
+. BFD_SEND (abfd, _bfd_find_line, \
+. (abfd, syms, sym, file, line))
+.
+.#define bfd_find_inliner_info(abfd, file, func, line) \
+. BFD_SEND (abfd, _bfd_find_inliner_info, \
+. (abfd, file, func, line))
+.
.#define bfd_debug_info_start(abfd) \
. BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
.
.#define bfd_merge_sections(abfd, link_info) \
. BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info))
.
+.#define bfd_is_group_section(abfd, sec) \
+. BFD_SEND (abfd, _bfd_is_group_section, (abfd, sec))
+.
.#define bfd_discard_group(abfd, sec) \
. BFD_SEND (abfd, _bfd_discard_group, (abfd, sec))
.
.#define bfd_link_add_symbols(abfd, info) \
. BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
.
-.#define bfd_link_just_syms(sec, info) \
+.#define bfd_link_just_syms(abfd, sec, info) \
. BFD_SEND (abfd, _bfd_link_just_syms, (sec, info))
.
.#define bfd_final_link(abfd, info) \
.#define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
. BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
.
+.#define bfd_get_synthetic_symtab(abfd, count, syms, dyncount, dynsyms, ret) \
+. BFD_SEND (abfd, _bfd_get_synthetic_symtab, (abfd, count, syms, \
+. dyncount, dynsyms, ret))
+.
.#define bfd_get_dynamic_reloc_upper_bound(abfd) \
. BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
.
. BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
.
.extern bfd_byte *bfd_get_relocated_section_contents
-. PARAMS ((bfd *, struct bfd_link_info *,
-. struct bfd_link_order *, bfd_byte *,
-. bfd_boolean, asymbol **));
+. (bfd *, struct bfd_link_info *, struct bfd_link_order *, bfd_byte *,
+. bfd_boolean, asymbol **);
.
*/
bfd_byte *
-bfd_get_relocated_section_contents (abfd, link_info, link_order, data,
- relocateable, symbols)
- bfd *abfd;
- struct bfd_link_info *link_info;
- struct bfd_link_order *link_order;
- bfd_byte *data;
- bfd_boolean relocateable;
- asymbol **symbols;
+bfd_get_relocated_section_contents (bfd *abfd,
+ struct bfd_link_info *link_info,
+ struct bfd_link_order *link_order,
+ bfd_byte *data,
+ bfd_boolean relocatable,
+ asymbol **symbols)
{
bfd *abfd2;
- bfd_byte *(*fn) PARAMS ((bfd *, struct bfd_link_info *,
- struct bfd_link_order *, bfd_byte *, bfd_boolean,
- asymbol **));
+ bfd_byte *(*fn) (bfd *, struct bfd_link_info *, struct bfd_link_order *,
+ bfd_byte *, bfd_boolean, asymbol **);
if (link_order->type == bfd_indirect_link_order)
{
fn = abfd2->xvec->_bfd_get_relocated_section_contents;
- return (*fn) (abfd, link_info, link_order, data, relocateable, symbols);
+ return (*fn) (abfd, link_info, link_order, data, relocatable, symbols);
}
/* Record information about an ELF program header. */
bfd_boolean
-bfd_record_phdr (abfd, type, flags_valid, flags, at_valid, at,
- includes_filehdr, includes_phdrs, count, secs)
- bfd *abfd;
- unsigned long type;
- bfd_boolean flags_valid;
- flagword flags;
- bfd_boolean at_valid;
- bfd_vma at;
- bfd_boolean includes_filehdr;
- bfd_boolean includes_phdrs;
- unsigned int count;
- asection **secs;
+bfd_record_phdr (bfd *abfd,
+ unsigned long type,
+ bfd_boolean flags_valid,
+ flagword flags,
+ bfd_boolean at_valid,
+ bfd_vma at,
+ bfd_boolean includes_filehdr,
+ bfd_boolean includes_phdrs,
+ unsigned int count,
+ asection **secs)
{
struct elf_segment_map *m, **pm;
bfd_size_type amt;
amt = sizeof (struct elf_segment_map);
amt += ((bfd_size_type) count - 1) * sizeof (asection *);
- m = (struct elf_segment_map *) bfd_alloc (abfd, amt);
+ m = bfd_zalloc (abfd, amt);
if (m == NULL)
return FALSE;
- m->next = NULL;
m->p_type = type;
m->p_flags = flags;
m->p_paddr = at;
- m->p_flags_valid = (unsigned int) flags_valid;
- m->p_paddr_valid = (unsigned int) at_valid;
- m->includes_filehdr = (unsigned int) includes_filehdr;
- m->includes_phdrs = (unsigned int) includes_phdrs;
+ m->p_flags_valid = flags_valid;
+ m->p_paddr_valid = at_valid;
+ m->includes_filehdr = includes_filehdr;
+ m->includes_phdrs = includes_phdrs;
m->count = count;
if (count > 0)
memcpy (m->sections, secs, count * sizeof (asection *));
return TRUE;
}
-void
-bfd_sprintf_vma (abfd, buf, value)
- bfd *abfd;
- char *buf;
- bfd_vma value;
+#ifdef BFD64
+/* Return true iff this target is 32-bit. */
+
+static bfd_boolean
+is32bit (bfd *abfd)
{
if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
- get_elf_backend_data (abfd)->elf_backend_sprintf_vma (abfd, buf, value);
- else
- sprintf_vma (buf, value);
+ {
+ const struct elf_backend_data *bed = get_elf_backend_data (abfd);
+ return bed->s->elfclass == ELFCLASS32;
+ }
+
+ /* For non-ELF targets, use architecture information. */
+ return bfd_arch_bits_per_address (abfd) <= 32;
}
+#endif
+
+/* bfd_sprintf_vma and bfd_fprintf_vma display an address in the
+ target's address size. */
void
-bfd_fprintf_vma (abfd, stream, value)
- bfd *abfd;
- PTR stream;
- bfd_vma value;
+bfd_sprintf_vma (bfd *abfd ATTRIBUTE_UNUSED, char *buf, bfd_vma value)
{
- if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
- get_elf_backend_data (abfd)->elf_backend_fprintf_vma (abfd, stream, value);
- else
- fprintf_vma ((FILE *) stream, value);
+#ifdef BFD64
+ if (is32bit (abfd))
+ {
+ sprintf (buf, "%08lx", (unsigned long) value & 0xffffffff);
+ return;
+ }
+#endif
+ sprintf_vma (buf, value);
+}
+
+void
+bfd_fprintf_vma (bfd *abfd ATTRIBUTE_UNUSED, void *stream, bfd_vma value)
+{
+#ifdef BFD64
+ if (is32bit (abfd))
+ {
+ fprintf ((FILE *) stream, "%08lx", (unsigned long) value & 0xffffffff);
+ return;
+ }
+#endif
+ fprintf_vma ((FILE *) stream, value);
}
/*
*/
bfd_boolean
-bfd_alt_mach_code (abfd, alternative)
- bfd *abfd;
- int alternative;
+bfd_alt_mach_code (bfd *abfd, int alternative)
{
if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
{
.struct bfd_preserve
.{
-. PTR marker;
-. PTR tdata;
+. void *marker;
+. void *tdata;
. flagword flags;
. const struct bfd_arch_info *arch_info;
-. struct sec *sections;
-. struct sec **section_tail;
+. struct bfd_section *sections;
+. struct bfd_section *section_last;
. unsigned int section_count;
. struct bfd_hash_table section_htab;
.};
*/
bfd_boolean
-bfd_preserve_save (abfd, preserve)
- bfd *abfd;
- struct bfd_preserve *preserve;
+bfd_preserve_save (bfd *abfd, struct bfd_preserve *preserve)
{
preserve->tdata = abfd->tdata.any;
preserve->arch_info = abfd->arch_info;
preserve->flags = abfd->flags;
preserve->sections = abfd->sections;
- preserve->section_tail = abfd->section_tail;
+ preserve->section_last = abfd->section_last;
preserve->section_count = abfd->section_count;
preserve->section_htab = abfd->section_htab;
- if (! bfd_hash_table_init (&abfd->section_htab, bfd_section_hash_newfunc))
+ if (! bfd_hash_table_init (&abfd->section_htab, bfd_section_hash_newfunc,
+ sizeof (struct section_hash_entry)))
return FALSE;
abfd->tdata.any = NULL;
abfd->arch_info = &bfd_default_arch_struct;
abfd->flags &= BFD_IN_MEMORY;
abfd->sections = NULL;
- abfd->section_tail = &abfd->sections;
+ abfd->section_last = NULL;
abfd->section_count = 0;
return TRUE;
*/
void
-bfd_preserve_restore (abfd, preserve)
- bfd *abfd;
- struct bfd_preserve *preserve;
+bfd_preserve_restore (bfd *abfd, struct bfd_preserve *preserve)
{
bfd_hash_table_free (&abfd->section_htab);
abfd->flags = preserve->flags;
abfd->section_htab = preserve->section_htab;
abfd->sections = preserve->sections;
- abfd->section_tail = preserve->section_tail;
+ abfd->section_last = preserve->section_last;
abfd->section_count = preserve->section_count;
/* bfd_release frees all memory more recently bfd_alloc'd than
*/
void
-bfd_preserve_finish (abfd, preserve)
- bfd *abfd ATTRIBUTE_UNUSED;
- struct bfd_preserve *preserve;
+bfd_preserve_finish (bfd *abfd ATTRIBUTE_UNUSED, struct bfd_preserve *preserve)
{
/* It would be nice to be able to free more memory here, eg. old
tdata, but that's not possible since these blocks are sitting
objalloc. */
bfd_hash_table_free (&preserve->section_htab);
}
+
+/*
+FUNCTION
+ bfd_emul_get_maxpagesize
+
+SYNOPSIS
+ bfd_vma bfd_emul_get_maxpagesize (const char *);
+
+DESCRIPTION
+ Returns the maximum page size, in bytes, as determined by
+ emulation.
+
+RETURNS
+ Returns the maximum page size in bytes for ELF, abort
+ otherwise.
+*/
+
+bfd_vma
+bfd_emul_get_maxpagesize (const char *emul)
+{
+ const bfd_target *target;
+
+ target = bfd_find_target (emul, NULL);
+ if (target != NULL
+ && target->flavour == bfd_target_elf_flavour)
+ return xvec_get_elf_backend_data (target)->maxpagesize;
+
+ abort ();
+ return 0;
+}
+
+static void
+bfd_elf_set_pagesize (const bfd_target *target, bfd_vma size,
+ int offset, const bfd_target *orig_target)
+{
+ if (target->flavour == bfd_target_elf_flavour)
+ {
+ const struct elf_backend_data *bed;
+
+ bed = xvec_get_elf_backend_data (target);
+ *((bfd_vma *) ((char *) bed + offset)) = size;
+ }
+
+ if (target->alternative_target
+ && target->alternative_target != orig_target)
+ bfd_elf_set_pagesize (target->alternative_target, size, offset,
+ orig_target);
+}
+
+/*
+FUNCTION
+ bfd_emul_set_maxpagesize
+
+SYNOPSIS
+ void bfd_emul_set_maxpagesize (const char *, bfd_vma);
+
+DESCRIPTION
+ For ELF, set the maximum page size for the emulation. It is
+ a no-op for other formats.
+
+*/
+
+void
+bfd_emul_set_maxpagesize (const char *emul, bfd_vma size)
+{
+ const bfd_target *target;
+
+ target = bfd_find_target (emul, NULL);
+ if (target)
+ bfd_elf_set_pagesize (target, size,
+ offsetof (struct elf_backend_data,
+ maxpagesize), target);
+}
+
+/*
+FUNCTION
+ bfd_emul_get_commonpagesize
+
+SYNOPSIS
+ bfd_vma bfd_emul_get_commonpagesize (const char *);
+
+DESCRIPTION
+ Returns the common page size, in bytes, as determined by
+ emulation.
+
+RETURNS
+ Returns the common page size in bytes for ELF, abort otherwise.
+*/
+
+bfd_vma
+bfd_emul_get_commonpagesize (const char *emul)
+{
+ const bfd_target *target;
+
+ target = bfd_find_target (emul, NULL);
+ if (target != NULL
+ && target->flavour == bfd_target_elf_flavour)
+ return xvec_get_elf_backend_data (target)->commonpagesize;
+
+ abort ();
+ return 0;
+}
+
+/*
+FUNCTION
+ bfd_emul_set_commonpagesize
+
+SYNOPSIS
+ void bfd_emul_set_commonpagesize (const char *, bfd_vma);
+
+DESCRIPTION
+ For ELF, set the common page size for the emulation. It is
+ a no-op for other formats.
+
+*/
+
+void
+bfd_emul_set_commonpagesize (const char *emul, bfd_vma size)
+{
+ const bfd_target *target;
+
+ target = bfd_find_target (emul, NULL);
+ if (target)
+ bfd_elf_set_pagesize (target, size,
+ offsetof (struct elf_backend_data,
+ commonpagesize), target);
+}
+
+/*
+FUNCTION
+ bfd_demangle
+
+SYNOPSIS
+ char *bfd_demangle (bfd *, const char *, int);
+
+DESCRIPTION
+ Wrapper around cplus_demangle. Strips leading underscores and
+ other such chars that would otherwise confuse the demangler.
+ If passed a g++ v3 ABI mangled name, returns a buffer allocated
+ with malloc holding the demangled name. Returns NULL otherwise
+ and on memory alloc failure.
+*/
+
+char *
+bfd_demangle (bfd *abfd, const char *name, int options)
+{
+ char *res, *alloc;
+ const char *pre, *suf;
+ size_t pre_len;
+ bfd_boolean skip_lead;
+
+ skip_lead = (abfd != NULL
+ && *name != '\0'
+ && bfd_get_symbol_leading_char (abfd) == *name);
+ if (skip_lead)
+ ++name;
+
+ /* This is a hack for better error reporting on XCOFF, PowerPC64-ELF
+ or the MS PE format. These formats have a number of leading '.'s
+ on at least some symbols, so we remove all dots to avoid
+ confusing the demangler. */
+ pre = name;
+ while (*name == '.' || *name == '$')
+ ++name;
+ pre_len = name - pre;
+
+ /* Strip off @plt and suchlike too. */
+ alloc = NULL;
+ suf = strchr (name, '@');
+ if (suf != NULL)
+ {
+ alloc = bfd_malloc (suf - name + 1);
+ if (alloc == NULL)
+ return NULL;
+ memcpy (alloc, name, suf - name);
+ alloc[suf - name] = '\0';
+ name = alloc;
+ }
+
+ res = cplus_demangle (name, options);
+
+ if (alloc != NULL)
+ free (alloc);
+
+ if (res == NULL)
+ {
+ if (skip_lead)
+ {
+ size_t len = strlen (pre) + 1;
+ alloc = bfd_malloc (len);
+ if (alloc == NULL)
+ return NULL;
+ memcpy (alloc, pre, len);
+ return alloc;
+ }
+ return NULL;
+ }
+
+ /* Put back any prefix or suffix. */
+ if (pre_len != 0 || suf != NULL)
+ {
+ size_t len;
+ size_t suf_len;
+ char *final;
+
+ len = strlen (res);
+ if (suf == NULL)
+ suf = res + len;
+ suf_len = strlen (suf) + 1;
+ final = bfd_malloc (pre_len + len + suf_len);
+ if (final != NULL)
+ {
+ memcpy (final, pre, pre_len);
+ memcpy (final + pre_len, res, len);
+ memcpy (final + pre_len + len, suf, suf_len);
+ }
+ free (res);
+ res = final;
+ }
+
+ return res;
+}