/* Generic BFD library interface and support routines.
- Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
- Free Software Foundation, Inc.
+ Copyright (C) 1990-2019 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
MA 02110-1301, USA. */
/*
+INODE
+typedef bfd, Error reporting, BFD front end, BFD front end
+
SECTION
<<typedef bfd>>
CODE_FRAGMENT
.
+.enum bfd_direction
+. {
+. no_direction = 0,
+. read_direction = 1,
+. write_direction = 2,
+. both_direction = 3
+. };
+.
+.enum bfd_plugin_format
+. {
+. bfd_plugin_unknown = 0,
+. bfd_plugin_yes = 1,
+. bfd_plugin_no = 2
+. };
+.
+.struct bfd_build_id
+. {
+. bfd_size_type size;
+. bfd_byte data[1];
+. };
+.
.struct bfd
.{
-. {* A unique identifier of the BFD *}
-. unsigned int id;
-.
. {* The filename the application opened the BFD with. *}
. const char *filename;
.
. void *iostream;
. const struct bfd_iovec *iovec;
.
+. {* The caching routines use these to maintain a
+. least-recently-used list of BFDs. *}
+. struct bfd *lru_prev, *lru_next;
+.
+. {* Track current file position (or current buffer offset for
+. in-memory BFDs). When a file is closed by the caching routines,
+. BFD retains state information on the file here. *}
+. ufile_ptr where;
+.
+. {* File modified time, if mtime_set is TRUE. *}
+. long mtime;
+.
+. {* A unique identifier of the BFD *}
+. unsigned int id;
+.
+. {* The format which belongs to the BFD. (object, core, etc.) *}
+. ENUM_BITFIELD (bfd_format) format : 3;
+.
+. {* The direction with which the BFD was opened. *}
+. ENUM_BITFIELD (bfd_direction) direction : 2;
+.
+. {* Format_specific flags. *}
+. flagword flags : 20;
+.
+. {* Values that may appear in the flags field of a BFD. These also
+. appear in the object_flags field of the bfd_target structure, where
+. they indicate the set of flags used by that backend (not all flags
+. are meaningful for all object file formats) (FIXME: at the moment,
+. the object_flags values have mostly just been copied from backend
+. to another, and are not necessarily correct). *}
+.
+.#define BFD_NO_FLAGS 0x0
+.
+. {* BFD contains relocation entries. *}
+.#define HAS_RELOC 0x1
+.
+. {* BFD is directly executable. *}
+.#define EXEC_P 0x2
+.
+. {* BFD has line number information (basically used for F_LNNO in a
+. COFF header). *}
+.#define HAS_LINENO 0x4
+.
+. {* BFD has debugging information. *}
+.#define HAS_DEBUG 0x08
+.
+. {* BFD has symbols. *}
+.#define HAS_SYMS 0x10
+.
+. {* BFD has local symbols (basically used for F_LSYMS in a COFF
+. header). *}
+.#define HAS_LOCALS 0x20
+.
+. {* BFD is a dynamic object. *}
+.#define DYNAMIC 0x40
+.
+. {* Text section is write protected (if D_PAGED is not set, this is
+. like an a.out NMAGIC file) (the linker sets this by default, but
+. clears it for -r or -N). *}
+.#define WP_TEXT 0x80
+.
+. {* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
+. linker sets this by default, but clears it for -r or -n or -N). *}
+.#define D_PAGED 0x100
+.
+. {* BFD is relaxable (this means that bfd_relax_section may be able to
+. do something) (sometimes bfd_relax_section can do something even if
+. this is not set). *}
+.#define BFD_IS_RELAXABLE 0x200
+.
+. {* This may be set before writing out a BFD to request using a
+. traditional format. For example, this is used to request that when
+. writing out an a.out object the symbols not be hashed to eliminate
+. duplicates. *}
+.#define BFD_TRADITIONAL_FORMAT 0x400
+.
+. {* This flag indicates that the BFD contents are actually cached
+. in memory. If this is set, iostream points to a bfd_in_memory
+. struct. *}
+.#define BFD_IN_MEMORY 0x800
+.
+. {* This BFD has been created by the linker and doesn't correspond
+. to any input file. *}
+.#define BFD_LINKER_CREATED 0x1000
+.
+. {* This may be set before writing out a BFD to request that it
+. be written using values for UIDs, GIDs, timestamps, etc. that
+. will be consistent from run to run. *}
+.#define BFD_DETERMINISTIC_OUTPUT 0x2000
+.
+. {* Compress sections in this BFD. *}
+.#define BFD_COMPRESS 0x4000
+.
+. {* Decompress sections in this BFD. *}
+.#define BFD_DECOMPRESS 0x8000
+.
+. {* BFD is a dummy, for plugins. *}
+.#define BFD_PLUGIN 0x10000
+.
+. {* Compress sections in this BFD with SHF_COMPRESSED from gABI. *}
+.#define BFD_COMPRESS_GABI 0x20000
+.
+. {* Convert ELF common symbol type to STT_COMMON or STT_OBJECT in this
+. BFD. *}
+.#define BFD_CONVERT_ELF_COMMON 0x40000
+.
+. {* Use the ELF STT_COMMON type in this BFD. *}
+.#define BFD_USE_ELF_STT_COMMON 0x80000
+.
+. {* Flags bits to be saved in bfd_preserve_save. *}
+.#define BFD_FLAGS_SAVED \
+. (BFD_IN_MEMORY | BFD_COMPRESS | BFD_DECOMPRESS | BFD_LINKER_CREATED \
+. | BFD_PLUGIN | BFD_COMPRESS_GABI | BFD_CONVERT_ELF_COMMON \
+. | BFD_USE_ELF_STT_COMMON)
+.
+. {* Flags bits which are for BFD use only. *}
+.#define BFD_FLAGS_FOR_BFD_USE_MASK \
+. (BFD_IN_MEMORY | BFD_COMPRESS | BFD_DECOMPRESS | BFD_LINKER_CREATED \
+. | BFD_PLUGIN | BFD_TRADITIONAL_FORMAT | BFD_DETERMINISTIC_OUTPUT \
+. | BFD_COMPRESS_GABI | BFD_CONVERT_ELF_COMMON | BFD_USE_ELF_STT_COMMON)
+.
. {* Is the file descriptor being cached? That is, can it be closed as
. needed, and re-opened when accessed later? *}
-. bfd_boolean cacheable;
+. unsigned int cacheable : 1;
.
. {* Marks whether there was a default target specified when the
. BFD was opened. This is used to select which matching algorithm
. to use to choose the back end. *}
-. bfd_boolean target_defaulted;
-.
-. {* The caching routines use these to maintain a
-. least-recently-used list of BFDs. *}
-. struct bfd *lru_prev, *lru_next;
-.
-. {* When a file is closed by the caching routines, BFD retains
-. state information on the file here... *}
-. ufile_ptr where;
+. unsigned int target_defaulted : 1;
.
. {* ... and here: (``once'' means at least once). *}
-. bfd_boolean opened_once;
+. unsigned int opened_once : 1;
.
. {* Set if we have a locally maintained mtime value, rather than
. getting it from the file each time. *}
-. bfd_boolean mtime_set;
+. unsigned int mtime_set : 1;
.
-. {* File modified time, if mtime_set is TRUE. *}
-. long mtime;
+. {* Flag set if symbols from this BFD should not be exported. *}
+. unsigned int no_export : 1;
.
-. {* Reserved for an unimplemented file locking extension. *}
-. int ifd;
+. {* Remember when output has begun, to stop strange things
+. from happening. *}
+. unsigned int output_has_begun : 1;
.
-. {* The format which belongs to the BFD. (object, core, etc.) *}
-. bfd_format format;
+. {* Have archive map. *}
+. unsigned int has_armap : 1;
.
-. {* The direction with which the BFD was opened. *}
-. enum bfd_direction
-. {
-. no_direction = 0,
-. read_direction = 1,
-. write_direction = 2,
-. both_direction = 3
-. }
-. direction;
+. {* Set if this is a thin archive. *}
+. unsigned int is_thin_archive : 1;
.
-. {* Format_specific flags. *}
-. flagword flags;
+. {* Set if only required symbols should be added in the link hash table for
+. this object. Used by VMS linkers. *}
+. unsigned int selective_search : 1;
+.
+. {* Set if this is the linker output BFD. *}
+. unsigned int is_linker_output : 1;
+.
+. {* Set if this is the linker input BFD. *}
+. unsigned int is_linker_input : 1;
+.
+. {* If this is an input for a compiler plug-in library. *}
+. ENUM_BITFIELD (bfd_plugin_format) plugin_format : 2;
+.
+. {* Set if this is a plugin output file. *}
+. unsigned int lto_output : 1;
+.
+. {* Set if this is a slim LTO object not loaded with a compiler plugin. *}
+. unsigned int lto_slim_object : 1;
+.
+. {* Set to dummy BFD created when claimed by a compiler plug-in
+. library. *}
+. bfd *plugin_dummy_bfd;
.
. {* Currently my_archive is tested before adding origin to
. anything. I believe that this can become always an add of
. origin, with origin set to 0 for non archive files. *}
. ufile_ptr origin;
.
-. {* Remember when output has begun, to stop strange things
-. from happening. *}
-. bfd_boolean output_has_begun;
+. {* The origin in the archive of the proxy entry. This will
+. normally be the same as origin, except for thin archives,
+. when it will contain the current offset of the proxy in the
+. thin archive rather than the offset of the bfd in its actual
+. container. *}
+. ufile_ptr proxy_origin;
.
. {* A hash table for section names. *}
. struct bfd_hash_table section_htab;
. {* The number of sections. *}
. unsigned int section_count;
.
+. {* A field used by _bfd_generic_link_add_archive_symbols. This will
+. be used only for archive elements. *}
+. int archive_pass;
+.
. {* Stuff only useful for object files:
. The start address. *}
. bfd_vma start_address;
.
+. {* Symbol table for output BFD (with symcount entries).
+. Also used by the linker to cache input BFD symbols. *}
+. struct bfd_symbol **outsymbols;
+.
. {* Used for input and output. *}
. unsigned int symcount;
.
-. {* Symbol table for output BFD (with symcount entries). *}
-. struct bfd_symbol **outsymbols;
-.
. {* Used for slurped dynamic symbol tables. *}
. unsigned int dynsymcount;
.
. {* Pointer to structure which contains architecture information. *}
. const struct bfd_arch_info *arch_info;
.
-. {* Flag set if symbols from this BFD should not be exported. *}
-. bfd_boolean no_export;
-.
. {* Stuff only useful for archives. *}
. void *arelt_data;
. struct bfd *my_archive; {* The containing archive BFD. *}
. struct bfd *archive_next; {* The next BFD in the archive. *}
. struct bfd *archive_head; {* The first BFD in the archive. *}
-. bfd_boolean has_armap;
-.
-. {* A chain of BFD structures involved in a link. *}
-. struct bfd *link_next;
+. struct bfd *nested_archives; {* List of nested archive in a flattened
+. thin archive. *}
.
-. {* A field used by _bfd_generic_link_add_archive_symbols. This will
-. be used only for archive elements. *}
-. int archive_pass;
+. union {
+. {* For input BFDs, a chain of BFDs involved in a link. *}
+. struct bfd *next;
+. {* For output BFD, the linker hash table. *}
+. struct bfd_link_hash_table *hash;
+. } link;
.
. {* Used by the back end to hold private data. *}
. union
. {
. struct aout_data_struct *aout_data;
. struct artdata *aout_ar_data;
-. struct _oasys_data *oasys_obj_data;
-. struct _oasys_ar_data *oasys_ar_data;
. struct coff_tdata *coff_obj_data;
. struct pe_tdata *pe_obj_data;
. struct xcoff_tdata *xcoff_obj_data;
. struct ecoff_tdata *ecoff_obj_data;
-. struct ieee_data_struct *ieee_data;
-. struct ieee_ar_data_struct *ieee_ar_data;
. struct srec_data_struct *srec_data;
+. struct verilog_data_struct *verilog_data;
. struct ihex_data_struct *ihex_data;
. struct tekhex_data_struct *tekhex_data;
. struct elf_obj_tdata *elf_obj_data;
-. struct nlm_obj_tdata *nlm_obj_data;
-. struct bout_data_struct *bout_data;
. struct mmo_data_struct *mmo_data;
. struct sun_core_struct *sun_core_data;
. struct sco5_core_struct *sco5_core_data;
. struct netbsd_core_struct *netbsd_core_data;
. struct mach_o_data_struct *mach_o_data;
. struct mach_o_fat_data_struct *mach_o_fat_data;
+. struct plugin_data_struct *plugin_data;
. struct bfd_pef_data_struct *pef_data;
. struct bfd_pef_xlib_data_struct *pef_xlib_data;
. struct bfd_sym_data_struct *sym_data;
. struct objalloc *, but we use void * to avoid requiring the inclusion
. of objalloc.h. *}
. void *memory;
+.
+. {* For input BFDs, the build ID, if the object has one. *}
+. const struct bfd_build_id *build_id;
.};
.
+.{* See note beside bfd_set_section_userdata. *}
+.static inline bfd_boolean
+.bfd_set_cacheable (bfd * abfd, bfd_boolean val)
+.{
+. abfd->cacheable = val;
+. return TRUE;
+.}
+.
*/
#include "sysdep.h"
where it is needed. The typedef's used are defined in bfd.h */
\f
/*
+INODE
+Error reporting, Miscellaneous, typedef bfd, BFD front end
+
SECTION
Error reporting
individual documentation for precise semantics). On an error,
they call <<bfd_set_error>> to set an error condition that callers
can check by calling <<bfd_get_error>>.
- If that returns <<bfd_error_system_call>>, then check
+ If that returns <<bfd_error_system_call>>, then check
<<errno>>.
The easiest way to report a BFD error to the user is to
. bfd_error_no_armap,
. bfd_error_no_more_archived_files,
. bfd_error_malformed_archive,
+. bfd_error_missing_dso,
. bfd_error_file_not_recognized,
. bfd_error_file_ambiguously_recognized,
. bfd_error_no_contents,
const char *const bfd_errmsgs[] =
{
- N_("No error"),
- N_("System call error"),
- N_("Invalid bfd target"),
- N_("File in wrong format"),
- N_("Archive object file in wrong format"),
- N_("Invalid operation"),
- N_("Memory exhausted"),
- N_("No symbols"),
- N_("Archive has no index; run ranlib to add one"),
- N_("No more archived files"),
- N_("Malformed archive"),
- N_("File format not recognized"),
- N_("File format is ambiguous"),
- N_("Section has no contents"),
- N_("Nonrepresentable section on output"),
- N_("Symbol needs debug section which does not exist"),
- N_("Bad value"),
- N_("File truncated"),
- N_("File too big"),
- N_("Error reading %s: %s"),
- N_("#<Invalid error code>")
+ N_("no error"),
+ N_("system call error"),
+ N_("invalid bfd target"),
+ N_("file in wrong format"),
+ N_("archive object file in wrong format"),
+ N_("invalid operation"),
+ N_("memory exhausted"),
+ N_("no symbols"),
+ N_("archive has no index; run ranlib to add one"),
+ N_("no more archived files"),
+ N_("malformed archive"),
+ N_("DSO missing from command line"),
+ N_("file format not recognized"),
+ N_("file format is ambiguous"),
+ N_("section has no contents"),
+ N_("nonrepresentable section on output"),
+ N_("symbol needs debug section which does not exist"),
+ N_("bad value"),
+ N_("file truncated"),
+ N_("file too big"),
+ N_("error reading %s: %s"),
+ N_("#<invalid error code>")
};
/*
bfd_set_error
SYNOPSIS
- void bfd_set_error (bfd_error_type error_tag, ...);
+ void bfd_set_error (bfd_error_type error_tag);
DESCRIPTION
Set the BFD error condition to be @var{error_tag}.
- If @var{error_tag} is bfd_error_on_input, then this function
- takes two more parameters, the input bfd where the error
- occurred, and the bfd_error_type error.
+
+ @var{error_tag} must not be bfd_error_on_input. Use
+ bfd_set_input_error for input errors instead.
*/
void
-bfd_set_error (bfd_error_type error_tag, ...)
+bfd_set_error (bfd_error_type error_tag)
{
bfd_error = error_tag;
- if (error_tag == bfd_error_on_input)
- {
- /* This is an error that occurred during bfd_close when
- writing an archive, but on one of the input files. */
- va_list ap;
-
- va_start (ap, error_tag);
- input_bfd = va_arg (ap, bfd *);
- input_error = va_arg (ap, int);
- if (input_error >= bfd_error_on_input)
- abort ();
- va_end (ap);
- }
+ if (bfd_error >= bfd_error_on_input)
+ abort ();
+}
+
+/*
+FUNCTION
+ bfd_set_input_error
+
+SYNOPSIS
+ void bfd_set_input_error (bfd *input, bfd_error_type error_tag);
+
+DESCRIPTION
+
+ Set the BFD error condition to be bfd_error_on_input.
+ @var{input} is the input bfd where the error occurred, and
+ @var{error_tag} the bfd_error_type error.
+*/
+
+void
+bfd_set_input_error (bfd *input, bfd_error_type error_tag)
+{
+ /* This is an error that occurred during bfd_close when writing an
+ archive, but on one of the input files. */
+ bfd_error = bfd_error_on_input;
+ input_bfd = input;
+ input_error = error_tag;
+ if (input_error >= bfd_error_on_input)
+ abort ();
}
/*
void
bfd_perror (const char *message)
{
+ fflush (stdout);
if (message == NULL || *message == '\0')
fprintf (stderr, "%s\n", bfd_errmsg (bfd_get_error ()));
else
fprintf (stderr, "%s: %s\n", message, bfd_errmsg (bfd_get_error ()));
+ fflush (stderr);
}
/*
problem. They call a BFD error handler function. This
function may be overridden by the program.
- The BFD error handler acts like printf.
+ The BFD error handler acts like vprintf.
CODE_FRAGMENT
.
-.typedef void (*bfd_error_handler_type) (const char *, ...);
+.typedef void (*bfd_error_handler_type) (const char *, va_list);
.
*/
static const char *_bfd_error_program_name;
-/* This is the default routine to handle BFD error messages.
- Like fprintf (stderr, ...), but also handles some extra format specifiers.
-
- %A section name from section. For group components, print group name too.
- %B file name from bfd. For archive components, prints archive too.
-
- Note - because these two extra format specifiers require special handling
- they are scanned for and processed in this function, before calling
- vfprintf. This means that the *arguments* for these format specifiers
- must be the first ones in the variable argument list, regardless of where
- the specifiers appear in the format string. Thus for example calling
- this function with a format string of:
-
- "blah %s blah %A blah %d blah %B"
+/* Support for positional parameters. */
- would involve passing the arguments as:
-
- "blah %s blah %A blah %d blah %B",
- asection_for_the_%A,
- bfd_for_the_%B,
- string_for_the_%s,
- integer_for_the_%d);
- */
-
-void
-_bfd_default_error_handler (const char *fmt, ...)
+union _bfd_doprnt_args
{
- va_list ap;
- char *bufp;
- const char *new_fmt, *p;
- size_t avail = 1000;
- char buf[1000];
+ int i;
+ long l;
+ long long ll;
+ double d;
+ long double ld;
+ void *p;
+ enum
+ {
+ Bad,
+ Int,
+ Long,
+ LongLong,
+ Double,
+ LongDouble,
+ Ptr
+ } type;
+};
- if (_bfd_error_program_name != NULL)
- fprintf (stderr, "%s: ", _bfd_error_program_name);
- else
- fprintf (stderr, "BFD: ");
+/* This macro and _bfd_doprnt taken from libiberty _doprnt.c, tidied a
+ little and extended to handle '%pA', '%pB' and positional parameters. */
- va_start (ap, fmt);
- new_fmt = fmt;
- bufp = buf;
+#define PRINT_TYPE(TYPE, FIELD) \
+ do \
+ { \
+ TYPE value = (TYPE) args[arg_no].FIELD; \
+ result = fprintf (stream, specifier, value); \
+ } while (0)
- /* Reserve enough space for the existing format string. */
- avail -= strlen (fmt) + 1;
- if (avail > 1000)
- _exit (EXIT_FAILURE);
+static int
+_bfd_doprnt (FILE *stream, const char *format, union _bfd_doprnt_args *args)
+{
+ const char *ptr = format;
+ char specifier[128];
+ int total_printed = 0;
+ unsigned int arg_count = 0;
- p = fmt;
- while (1)
+ while (*ptr != '\0')
{
- char *q;
- size_t len, extra, trim;
+ int result;
- p = strchr (p, '%');
- if (p == NULL || p[1] == '\0')
+ if (*ptr != '%')
+ {
+ /* While we have regular characters, print them. */
+ char *end = strchr (ptr, '%');
+ if (end != NULL)
+ result = fprintf (stream, "%.*s", (int) (end - ptr), ptr);
+ else
+ result = fprintf (stream, "%s", ptr);
+ ptr += result;
+ }
+ else if (ptr[1] == '%')
+ {
+ fputc ('%', stream);
+ result = 1;
+ ptr += 2;
+ }
+ else
{
- if (new_fmt == buf)
+ /* We have a format specifier! */
+ char *sptr = specifier;
+ int wide_width = 0, short_width = 0;
+ unsigned int arg_no;
+
+ /* Copy the % and move forward. */
+ *sptr++ = *ptr++;
+
+ /* Check for a positional parameter. */
+ arg_no = -1u;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
{
- len = strlen (fmt);
- memcpy (bufp, fmt, len + 1);
+ arg_no = *ptr - '1';
+ ptr += 2;
}
- break;
- }
- if (p[1] == 'A' || p[1] == 'B')
- {
- len = p - fmt;
- memcpy (bufp, fmt, len);
- bufp += len;
- fmt = p + 2;
- new_fmt = buf;
-
- /* If we run out of space, tough, you lose your ridiculously
- long file or section name. It's not safe to try to alloc
- memory here; We might be printing an out of memory message. */
- if (avail == 0)
+ /* Move past flags. */
+ while (strchr ("-+ #0'I", *ptr))
+ *sptr++ = *ptr++;
+
+ if (*ptr == '*')
{
- *bufp++ = '*';
- *bufp++ = '*';
- *bufp = '\0';
+ int value;
+ unsigned int arg_index;
+
+ ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_index = *ptr - '1';
+ ptr += 2;
+ }
+ value = abs (args[arg_index].i);
+ arg_count++;
+ sptr += sprintf (sptr, "%d", value);
}
else
+ /* Handle explicit numeric value. */
+ while (ISDIGIT (*ptr))
+ *sptr++ = *ptr++;
+
+ /* Precision. */
+ if (*ptr == '.')
{
- if (p[1] == 'B')
+ /* Copy and go past the period. */
+ *sptr++ = *ptr++;
+ if (*ptr == '*')
{
- bfd *abfd = va_arg (ap, bfd *);
+ int value;
+ unsigned int arg_index;
- if (abfd == NULL)
- /* Invoking %B with a null bfd pointer is an internal error. */
- abort ();
- else if (abfd->my_archive)
- snprintf (bufp, avail, "%s(%s)",
- abfd->my_archive->filename, abfd->filename);
- else
- snprintf (bufp, avail, "%s", abfd->filename);
+ ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_index = *ptr - '1';
+ ptr += 2;
+ }
+ value = abs (args[arg_index].i);
+ arg_count++;
+ sptr += sprintf (sptr, "%d", value);
}
else
+ /* Handle explicit numeric value. */
+ while (ISDIGIT (*ptr))
+ *sptr++ = *ptr++;
+ }
+ while (strchr ("hlL", *ptr))
+ {
+ switch (*ptr)
+ {
+ case 'h':
+ short_width = 1;
+ break;
+ case 'l':
+ wide_width++;
+ break;
+ case 'L':
+ wide_width = 2;
+ break;
+ default:
+ abort();
+ }
+ *sptr++ = *ptr++;
+ }
+
+ /* Copy the type specifier, and NULL terminate. */
+ *sptr++ = *ptr++;
+ *sptr = '\0';
+ if ((int) arg_no < 0)
+ arg_no = arg_count;
+
+ switch (ptr[-1])
+ {
+ case 'd':
+ case 'i':
+ case 'o':
+ case 'u':
+ case 'x':
+ case 'X':
+ case 'c':
+ {
+ /* Short values are promoted to int, so just copy it
+ as an int and trust the C library printf to cast it
+ to the right width. */
+ if (short_width)
+ PRINT_TYPE (int, i);
+ else
+ {
+ switch (wide_width)
+ {
+ case 0:
+ PRINT_TYPE (int, i);
+ break;
+ case 1:
+ PRINT_TYPE (long, l);
+ break;
+ case 2:
+ default:
+#if defined (__MSVCRT__)
+ sptr[-3] = 'I';
+ sptr[-2] = '6';
+ sptr[-1] = '4';
+ *sptr++ = ptr[-1];
+ *sptr = '\0';
+#endif
+#if defined (__GNUC__) || defined (HAVE_LONG_LONG)
+ PRINT_TYPE (long long, ll);
+#else
+ /* Fake it and hope for the best. */
+ PRINT_TYPE (long, l);
+#endif
+ break;
+ }
+ }
+ }
+ break;
+ case 'f':
+ case 'e':
+ case 'E':
+ case 'g':
+ case 'G':
+ {
+ if (wide_width == 0)
+ PRINT_TYPE (double, d);
+ else
+ {
+#if defined (__GNUC__) || defined (HAVE_LONG_DOUBLE)
+ PRINT_TYPE (long double, ld);
+#else
+ /* Fake it and hope for the best. */
+ PRINT_TYPE (double, d);
+#endif
+ }
+ }
+ break;
+ case 's':
+ PRINT_TYPE (char *, p);
+ break;
+ case 'p':
+ if (*ptr == 'A')
{
- asection *sec = va_arg (ap, asection *);
+ asection *sec;
bfd *abfd;
const char *group = NULL;
struct coff_comdat_info *ci;
+ ptr++;
+ sec = (asection *) args[arg_no].p;
if (sec == NULL)
- /* Invoking %A with a null section pointer is an internal error. */
+ /* Invoking %pA with a null section pointer is an
+ internal error. */
abort ();
abfd = sec->owner;
if (abfd != NULL
sec)) != NULL)
group = ci->name;
if (group != NULL)
- snprintf (bufp, avail, "%s[%s]", sec->name, group);
+ result = fprintf (stream, "%s[%s]", sec->name, group);
+ else
+ result = fprintf (stream, "%s", sec->name);
+ }
+ else if (*ptr == 'B')
+ {
+ bfd *abfd;
+
+ ptr++;
+ abfd = (bfd *) args[arg_no].p;
+ if (abfd == NULL)
+ /* Invoking %pB with a null bfd pointer is an
+ internal error. */
+ abort ();
+ else if (abfd->my_archive
+ && !bfd_is_thin_archive (abfd->my_archive))
+ result = fprintf (stream, "%s(%s)",
+ abfd->my_archive->filename,
+ abfd->filename);
else
- snprintf (bufp, avail, "%s", sec->name);
+ result = fprintf (stream, "%s", abfd->filename);
}
- len = strlen (bufp);
- avail = avail - len + 2;
-
- /* We need to replace any '%' we printed by "%%".
- First count how many. */
- q = bufp;
- bufp += len;
- extra = 0;
- while ((q = strchr (q, '%')) != NULL)
+ else
+ PRINT_TYPE (void *, p);
+ break;
+ default:
+ abort();
+ }
+ arg_count++;
+ }
+ if (result == -1)
+ return -1;
+ total_printed += result;
+ }
+
+ return total_printed;
+}
+
+/* First pass over FORMAT to gather ARGS. Returns number of args. */
+
+static unsigned int
+_bfd_doprnt_scan (const char *format, union _bfd_doprnt_args *args)
+{
+ const char *ptr = format;
+ unsigned int arg_count = 0;
+
+ while (*ptr != '\0')
+ {
+ if (*ptr != '%')
+ {
+ ptr = strchr (ptr, '%');
+ if (ptr == NULL)
+ break;
+ }
+ else if (ptr[1] == '%')
+ ptr += 2;
+ else
+ {
+ int wide_width = 0, short_width = 0;
+ unsigned int arg_no;
+ int arg_type;
+
+ ptr++;
+
+ /* Check for a positional parameter. */
+ arg_no = -1u;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_no = *ptr - '1';
+ ptr += 2;
+ }
+
+ /* Move past flags. */
+ while (strchr ("-+ #0'I", *ptr))
+ ptr++;
+
+ if (*ptr == '*')
+ {
+ unsigned int arg_index;
+
+ ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
{
- ++q;
- ++extra;
+ arg_index = *ptr - '1';
+ ptr += 2;
}
+ if (arg_index >= 9)
+ abort ();
+ args[arg_index].type = Int;
+ arg_count++;
+ }
+ else
+ /* Handle explicit numeric value. */
+ while (ISDIGIT (*ptr))
+ ptr++;
- /* If there isn't room, trim off the end of the string. */
- q = bufp;
- bufp += extra;
- if (extra > avail)
+ /* Precision. */
+ if (*ptr == '.')
+ {
+ ptr++;
+ if (*ptr == '*')
{
- trim = extra - avail;
- bufp -= trim;
- do
+ unsigned int arg_index;
+
+ ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
{
- if (*--q == '%')
- --extra;
+ arg_index = *ptr - '1';
+ ptr += 2;
}
- while (--trim != 0);
- *q = '\0';
- avail = extra;
+ if (arg_index >= 9)
+ abort ();
+ args[arg_index].type = Int;
+ arg_count++;
}
- avail -= extra;
-
- /* Now double all '%' chars, shuffling the string as we go. */
- while (extra != 0)
+ else
+ /* Handle explicit numeric value. */
+ while (ISDIGIT (*ptr))
+ ptr++;
+ }
+ while (strchr ("hlL", *ptr))
+ {
+ switch (*ptr)
{
- while ((q[extra] = *q) != '%')
- --q;
- q[--extra] = '%';
- --q;
+ case 'h':
+ short_width = 1;
+ break;
+ case 'l':
+ wide_width++;
+ break;
+ case 'L':
+ wide_width = 2;
+ break;
+ default:
+ abort();
}
+ ptr++;
+ }
+
+ ptr++;
+ if ((int) arg_no < 0)
+ arg_no = arg_count;
+
+ arg_type = Bad;
+ switch (ptr[-1])
+ {
+ case 'd':
+ case 'i':
+ case 'o':
+ case 'u':
+ case 'x':
+ case 'X':
+ case 'c':
+ {
+ if (short_width)
+ arg_type = Int;
+ else
+ {
+ switch (wide_width)
+ {
+ case 0:
+ arg_type = Int;
+ break;
+ case 1:
+ arg_type = Long;
+ break;
+ case 2:
+ default:
+#if defined (__GNUC__) || defined (HAVE_LONG_LONG)
+ arg_type = LongLong;
+#else
+ arg_type = Long;
+#endif
+ break;
+ }
+ }
+ }
+ break;
+ case 'f':
+ case 'e':
+ case 'E':
+ case 'g':
+ case 'G':
+ {
+ if (wide_width == 0)
+ arg_type = Double;
+ else
+ {
+#if defined (__GNUC__) || defined (HAVE_LONG_DOUBLE)
+ arg_type = LongDouble;
+#else
+ arg_type = Double;
+#endif
+ }
+ }
+ break;
+ case 's':
+ arg_type = Ptr;
+ break;
+ case 'p':
+ if (*ptr == 'A' || *ptr == 'B')
+ ptr++;
+ arg_type = Ptr;
+ break;
+ default:
+ abort();
}
+
+ if (arg_no >= 9)
+ abort ();
+ args[arg_no].type = arg_type;
+ arg_count++;
}
- p = p + 2;
}
- vfprintf (stderr, new_fmt, ap);
- va_end (ap);
+ return arg_count;
+}
+
+static void
+error_handler_internal (const char *fmt, va_list ap)
+{
+ unsigned int i, arg_count;
+ union _bfd_doprnt_args args[9];
+
+ for (i = 0; i < sizeof (args) / sizeof (args[0]); i++)
+ args[i].type = Bad;
+
+ arg_count = _bfd_doprnt_scan (fmt, args);
+ for (i = 0; i < arg_count; i++)
+ {
+ switch (args[i].type)
+ {
+ case Int:
+ args[i].i = va_arg (ap, int);
+ break;
+ case Long:
+ args[i].l = va_arg (ap, long);
+ break;
+ case LongLong:
+ args[i].ll = va_arg (ap, long long);
+ break;
+ case Double:
+ args[i].d = va_arg (ap, double);
+ break;
+ case LongDouble:
+ args[i].ld = va_arg (ap, long double);
+ break;
+ case Ptr:
+ args[i].p = va_arg (ap, void *);
+ break;
+ default:
+ abort ();
+ }
+ }
+
+ /* PR 4992: Don't interrupt output being sent to stdout. */
+ fflush (stdout);
+
+ if (_bfd_error_program_name != NULL)
+ fprintf (stderr, "%s: ", _bfd_error_program_name);
+ else
+ fprintf (stderr, "BFD: ");
- putc ('\n', stderr);
+ _bfd_doprnt (stderr, fmt, args);
+
+ /* On AIX, putc is implemented as a macro that triggers a -Wunused-value
+ warning, so use the fputc function to avoid it. */
+ fputc ('\n', stderr);
+ fflush (stderr);
}
/* This is a function pointer to the routine which should handle BFD
function pointer permits a program linked against BFD to intercept
the messages and deal with them itself. */
-bfd_error_handler_type _bfd_error_handler = _bfd_default_error_handler;
+static bfd_error_handler_type _bfd_error_internal = error_handler_internal;
+
+/*
+FUNCTION
+ _bfd_error_handler
+
+SYNOPSIS
+ void _bfd_error_handler (const char *fmt, ...) ATTRIBUTE_PRINTF_1;
+
+DESCRIPTION
+ This is the default routine to handle BFD error messages.
+ Like fprintf (stderr, ...), but also handles some extra format
+ specifiers.
+
+ %pA section name from section. For group components, prints
+ group name too.
+ %pB file name from bfd. For archive components, prints
+ archive too.
+
+ Beware: Only supports a maximum of 9 format arguments.
+*/
+
+void
+_bfd_error_handler (const char *fmt, ...)
+{
+ va_list ap;
+
+ va_start (ap, fmt);
+ _bfd_error_internal (fmt, ap);
+ va_end (ap);
+}
/*
FUNCTION
{
bfd_error_handler_type pold;
- pold = _bfd_error_handler;
- _bfd_error_handler = pnew;
+ pold = _bfd_error_internal;
+ _bfd_error_internal = pnew;
return pold;
}
_bfd_error_program_name = name;
}
+/*
+SUBSECTION
+ BFD assert handler
+
+ If BFD finds an internal inconsistency, the bfd assert
+ handler is called with information on the BFD version, BFD
+ source file and line. If this happens, most programs linked
+ against BFD are expected to want to exit with an error, or mark
+ the current BFD operation as failed, so it is recommended to
+ override the default handler, which just calls
+ _bfd_error_handler and continues.
+
+CODE_FRAGMENT
+.
+.typedef void (*bfd_assert_handler_type) (const char *bfd_formatmsg,
+. const char *bfd_version,
+. const char *bfd_file,
+. int bfd_line);
+.
+*/
+
+/* Note the use of bfd_ prefix on the parameter names above: we want to
+ show which one is the message and which is the version by naming the
+ parameters, but avoid polluting the program-using-bfd namespace as
+ the typedef is visible in the exported headers that the program
+ includes. Below, it's just for consistency. */
+
+static void
+_bfd_default_assert_handler (const char *bfd_formatmsg,
+ const char *bfd_version,
+ const char *bfd_file,
+ int bfd_line)
+
+{
+ _bfd_error_handler (bfd_formatmsg, bfd_version, bfd_file, bfd_line);
+}
+
+/* Similar to _bfd_error_handler, a program can decide to exit on an
+ internal BFD error. We use a non-variadic type to simplify passing
+ on parameters to other functions, e.g. _bfd_error_handler. */
+
+static bfd_assert_handler_type _bfd_assert_handler = _bfd_default_assert_handler;
+
/*
FUNCTION
- bfd_get_error_handler
+ bfd_set_assert_handler
SYNOPSIS
- bfd_error_handler_type bfd_get_error_handler (void);
+ bfd_assert_handler_type bfd_set_assert_handler (bfd_assert_handler_type);
DESCRIPTION
- Return the BFD error handler function.
+ Set the BFD assert handler function. Returns the previous
+ function.
*/
-bfd_error_handler_type
-bfd_get_error_handler (void)
+bfd_assert_handler_type
+bfd_set_assert_handler (bfd_assert_handler_type pnew)
{
- return _bfd_error_handler;
+ bfd_assert_handler_type pold;
+
+ pold = _bfd_assert_handler;
+ _bfd_assert_handler = pnew;
+ return pold;
}
\f
/*
+INODE
+Miscellaneous, Memory Usage, Error reporting, BFD front end
+
SECTION
Miscellaneous
section @var{sec} to the values @var{rel} and @var{count}.
The argument @var{abfd} is ignored.
+.#define bfd_set_reloc(abfd, asect, location, count) \
+. BFD_SEND (abfd, _bfd_set_reloc, (abfd, asect, location, count))
*/
-void
-bfd_set_reloc (bfd *ignore_abfd ATTRIBUTE_UNUSED,
- sec_ptr asect,
- arelent **location,
- unsigned int count)
-{
- asect->orelocation = location;
- asect->reloc_count = count;
-}
-
/*
FUNCTION
bfd_set_file_flags
void
bfd_assert (const char *file, int line)
{
- (*_bfd_error_handler) (_("BFD %s assertion fail %s:%d"),
- BFD_VERSION_STRING, file, line);
+ /* xgettext:c-format */
+ (*_bfd_assert_handler) (_("BFD %s assertion fail %s:%d"),
+ BFD_VERSION_STRING, file, line);
}
/* A more or less friendly abort message. In libbfd.h abort is
_bfd_abort (const char *file, int line, const char *fn)
{
if (fn != NULL)
- (*_bfd_error_handler)
- (_("BFD %s internal error, aborting at %s line %d in %s\n"),
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("BFD %s internal error, aborting at %s:%d in %s\n"),
BFD_VERSION_STRING, file, line, fn);
else
- (*_bfd_error_handler)
- (_("BFD %s internal error, aborting at %s line %d\n"),
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("BFD %s internal error, aborting at %s:%d\n"),
BFD_VERSION_STRING, file, line);
- (*_bfd_error_handler) (_("Please report this bug.\n"));
+ _bfd_error_handler (_("Please report this bug.\n"));
_exit (EXIT_FAILURE);
}
bfd_get_arch_size
SYNOPSIS
- int bfd_get_arch_size (bfd *abfd);
+ int bfd_get_arch_size (bfd *abfd);
DESCRIPTION
- Returns the architecture address size, in bits, as determined
- by the object file's format. For ELF, this information is
- included in the header.
+ Returns the normalized architecture address size, in bits, as
+ determined by the object file's format. By normalized, we mean
+ either 32 or 64. For ELF, this information is included in the
+ header. Use bfd_arch_bits_per_address for number of bits in
+ the architecture address.
RETURNS
Returns the arch size in bits if known, <<-1>> otherwise.
if (abfd->xvec->flavour == bfd_target_elf_flavour)
return get_elf_backend_data (abfd)->s->arch_size;
- return -1;
+ return bfd_arch_bits_per_address (abfd) > 32 ? 64 : 32;
}
/*
bfd_get_sign_extend_vma
SYNOPSIS
- int bfd_get_sign_extend_vma (bfd *abfd);
+ int bfd_get_sign_extend_vma (bfd *abfd);
DESCRIPTION
Indicates if the target architecture "naturally" sign extends
if (CONST_STRNEQ (name, "coff-go32")
|| strcmp (name, "pe-i386") == 0
|| strcmp (name, "pei-i386") == 0
+ || strcmp (name, "pe-x86-64") == 0
+ || strcmp (name, "pei-x86-64") == 0
|| strcmp (name, "pe-arm-wince-little") == 0
- || strcmp (name, "pei-arm-wince-little") == 0)
+ || strcmp (name, "pei-arm-wince-little") == 0
+ || strcmp (name, "aixcoff-rs6000") == 0
+ || strcmp (name, "aix5coff64-rs6000") == 0)
return 1;
+ if (CONST_STRNEQ (name, "mach-o"))
+ return 0;
+
bfd_set_error (bfd_error_wrong_format);
return -1;
}
bfd_set_start_address
SYNOPSIS
- bfd_boolean bfd_set_start_address (bfd *abfd, bfd_vma vma);
+ bfd_boolean bfd_set_start_address (bfd *abfd, bfd_vma vma);
DESCRIPTION
Make @var{vma} the entry point of output BFD @var{abfd}.
if (sizeof (bfd_vma) <= sizeof (unsigned long))
return strtoul (string, (char **) end, base);
-#ifdef HAVE_STRTOULL
+#if defined (HAVE_STRTOULL) && defined (HAVE_LONG_LONG)
if (sizeof (bfd_vma) <= sizeof (unsigned long long))
return strtoull (string, (char **) end, base);
#endif
Not enough memory exists to create private data for @var{obfd}.
.#define bfd_copy_private_header_data(ibfd, obfd) \
-. BFD_SEND (obfd, _bfd_copy_private_header_data, \
-. (ibfd, obfd))
+. BFD_SEND (obfd, _bfd_copy_private_header_data, \
+. (ibfd, obfd))
*/
Not enough memory exists to create private data for @var{obfd}.
.#define bfd_copy_private_bfd_data(ibfd, obfd) \
-. BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
-. (ibfd, obfd))
-
-*/
-
-/*
-FUNCTION
- bfd_merge_private_bfd_data
-
-SYNOPSIS
- bfd_boolean bfd_merge_private_bfd_data (bfd *ibfd, bfd *obfd);
-
-DESCRIPTION
- Merge private BFD information from the BFD @var{ibfd} to the
- the output file BFD @var{obfd} when linking. Return <<TRUE>>
- on success, <<FALSE>> on error. Possible error returns are:
-
- o <<bfd_error_no_memory>> -
- Not enough memory exists to create private data for @var{obfd}.
-
-.#define bfd_merge_private_bfd_data(ibfd, obfd) \
-. BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
-. (ibfd, obfd))
+. BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
+. (ibfd, obfd))
*/
Not enough memory exists to create private data for @var{obfd}.
.#define bfd_set_private_flags(abfd, flags) \
-. BFD_SEND (abfd, _bfd_set_private_flags, (abfd, flags))
+. BFD_SEND (abfd, _bfd_set_private_flags, (abfd, flags))
*/
The following functions exist but have not yet been documented.
.#define bfd_sizeof_headers(abfd, info) \
-. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, info))
+. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, info))
.
.#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
-. BFD_SEND (abfd, _bfd_find_nearest_line, \
-. (abfd, sec, syms, off, file, func, line))
+. BFD_SEND (abfd, _bfd_find_nearest_line, \
+. (abfd, syms, sec, off, file, func, line, NULL))
+.
+.#define bfd_find_nearest_line_discriminator(abfd, sec, syms, off, file, func, \
+. line, disc) \
+. BFD_SEND (abfd, _bfd_find_nearest_line, \
+. (abfd, syms, sec, off, file, func, line, disc))
.
.#define bfd_find_line(abfd, syms, sym, file, line) \
-. BFD_SEND (abfd, _bfd_find_line, \
-. (abfd, syms, sym, file, line))
+. BFD_SEND (abfd, _bfd_find_line, \
+. (abfd, syms, sym, file, line))
.
.#define bfd_find_inliner_info(abfd, file, func, line) \
-. BFD_SEND (abfd, _bfd_find_inliner_info, \
-. (abfd, file, func, line))
+. BFD_SEND (abfd, _bfd_find_inliner_info, \
+. (abfd, file, func, line))
.
.#define bfd_debug_info_start(abfd) \
-. BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
+. BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
.
.#define bfd_debug_info_end(abfd) \
-. BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
+. BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
.
.#define bfd_debug_info_accumulate(abfd, section) \
-. BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
+. BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
.
.#define bfd_stat_arch_elt(abfd, stat) \
-. BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
+. BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
.
.#define bfd_update_armap_timestamp(abfd) \
-. BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
+. BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
.
.#define bfd_set_arch_mach(abfd, arch, mach)\
-. BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
+. BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
.
.#define bfd_relax_section(abfd, section, link_info, again) \
-. BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
+. BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
.
.#define bfd_gc_sections(abfd, link_info) \
. BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
.
+.#define bfd_lookup_section_flags(link_info, flag_info, section) \
+. BFD_SEND (abfd, _bfd_lookup_section_flags, (link_info, flag_info, section))
+.
.#define bfd_merge_sections(abfd, link_info) \
. BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info))
.
.#define bfd_link_hash_table_create(abfd) \
. BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
.
-.#define bfd_link_hash_table_free(abfd, hash) \
-. BFD_SEND (abfd, _bfd_link_hash_table_free, (hash))
-.
.#define bfd_link_add_symbols(abfd, info) \
. BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
.
. BFD_SEND (abfd, _bfd_final_link, (abfd, info))
.
.#define bfd_free_cached_info(abfd) \
-. BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
+. BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
.
.#define bfd_get_dynamic_symtab_upper_bound(abfd) \
. BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
amt = sizeof (struct elf_segment_map);
amt += ((bfd_size_type) count - 1) * sizeof (asection *);
- m = bfd_zalloc (abfd, amt);
+ m = (struct elf_segment_map *) bfd_zalloc (abfd, amt);
if (m == NULL)
return FALSE;
if (count > 0)
memcpy (m->sections, secs, count * sizeof (asection *));
- for (pm = &elf_tdata (abfd)->segment_map; *pm != NULL; pm = &(*pm)->next)
+ for (pm = &elf_seg_map (abfd); *pm != NULL; pm = &(*pm)->next)
;
*pm = m;
return TRUE;
}
-void
-bfd_sprintf_vma (bfd *abfd, char *buf, bfd_vma value)
+#ifdef BFD64
+/* Return true iff this target is 32-bit. */
+
+static bfd_boolean
+is32bit (bfd *abfd)
{
if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
- get_elf_backend_data (abfd)->elf_backend_sprintf_vma (abfd, buf, value);
- else
- sprintf_vma (buf, value);
+ {
+ const struct elf_backend_data *bed = get_elf_backend_data (abfd);
+ return bed->s->elfclass == ELFCLASS32;
+ }
+
+ /* For non-ELF targets, use architecture information. */
+ return bfd_arch_bits_per_address (abfd) <= 32;
}
+#endif
+
+/* bfd_sprintf_vma and bfd_fprintf_vma display an address in the
+ target's address size. */
void
-bfd_fprintf_vma (bfd *abfd, void *stream, bfd_vma value)
+bfd_sprintf_vma (bfd *abfd ATTRIBUTE_UNUSED, char *buf, bfd_vma value)
{
- if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
- get_elf_backend_data (abfd)->elf_backend_fprintf_vma (abfd, stream, value);
#ifdef BFD64
- /* fprintf_vma() on a 64-bit enabled host will always print a 64-bit
- value, but really we want to display the address in the target's
- address size. Since we do not have a field in the bfd structure
- to tell us this, we take a guess, based on the target's name. */
- else if (strstr (bfd_get_target (abfd), "64") == NULL
- && strcmp (bfd_get_target (abfd), "mmo") != 0)
- fprintf ((FILE *) stream, "%08lx", (unsigned long) (value & 0xffffffff));
+ if (is32bit (abfd))
+ {
+ sprintf (buf, "%08lx", (unsigned long) value & 0xffffffff);
+ return;
+ }
#endif
- else
- fprintf_vma ((FILE *) stream, value);
+ sprintf_vma (buf, value);
+}
+
+void
+bfd_fprintf_vma (bfd *abfd ATTRIBUTE_UNUSED, void *stream, bfd_vma value)
+{
+#ifdef BFD64
+ if (is32bit (abfd))
+ {
+ fprintf ((FILE *) stream, "%08lx", (unsigned long) value & 0xffffffff);
+ return;
+ }
+#endif
+ fprintf_vma ((FILE *) stream, value);
}
/*
return FALSE;
}
-/*
-CODE_FRAGMENT
-
-.struct bfd_preserve
-.{
-. void *marker;
-. void *tdata;
-. flagword flags;
-. const struct bfd_arch_info *arch_info;
-. struct bfd_section *sections;
-. struct bfd_section *section_last;
-. unsigned int section_count;
-. struct bfd_hash_table section_htab;
-.};
-.
-*/
-
-/*
-FUNCTION
- bfd_preserve_save
-
-SYNOPSIS
- bfd_boolean bfd_preserve_save (bfd *, struct bfd_preserve *);
-
-DESCRIPTION
- When testing an object for compatibility with a particular
- target back-end, the back-end object_p function needs to set
- up certain fields in the bfd on successfully recognizing the
- object. This typically happens in a piecemeal fashion, with
- failures possible at many points. On failure, the bfd is
- supposed to be restored to its initial state, which is
- virtually impossible. However, restoring a subset of the bfd
- state works in practice. This function stores the subset and
- reinitializes the bfd.
-
-*/
-
-bfd_boolean
-bfd_preserve_save (bfd *abfd, struct bfd_preserve *preserve)
-{
- preserve->tdata = abfd->tdata.any;
- preserve->arch_info = abfd->arch_info;
- preserve->flags = abfd->flags;
- preserve->sections = abfd->sections;
- preserve->section_last = abfd->section_last;
- preserve->section_count = abfd->section_count;
- preserve->section_htab = abfd->section_htab;
-
- if (! bfd_hash_table_init (&abfd->section_htab, bfd_section_hash_newfunc,
- sizeof (struct section_hash_entry)))
- return FALSE;
-
- abfd->tdata.any = NULL;
- abfd->arch_info = &bfd_default_arch_struct;
- abfd->flags &= BFD_IN_MEMORY;
- abfd->sections = NULL;
- abfd->section_last = NULL;
- abfd->section_count = 0;
-
- return TRUE;
-}
-
-/*
-FUNCTION
- bfd_preserve_restore
-
-SYNOPSIS
- void bfd_preserve_restore (bfd *, struct bfd_preserve *);
-
-DESCRIPTION
- This function restores bfd state saved by bfd_preserve_save.
- If MARKER is non-NULL in struct bfd_preserve then that block
- and all subsequently bfd_alloc'd memory is freed.
-
-*/
-
-void
-bfd_preserve_restore (bfd *abfd, struct bfd_preserve *preserve)
-{
- bfd_hash_table_free (&abfd->section_htab);
-
- abfd->tdata.any = preserve->tdata;
- abfd->arch_info = preserve->arch_info;
- abfd->flags = preserve->flags;
- abfd->section_htab = preserve->section_htab;
- abfd->sections = preserve->sections;
- abfd->section_last = preserve->section_last;
- abfd->section_count = preserve->section_count;
-
- /* bfd_release frees all memory more recently bfd_alloc'd than
- its arg, as well as its arg. */
- if (preserve->marker != NULL)
- {
- bfd_release (abfd, preserve->marker);
- preserve->marker = NULL;
- }
-}
-
-/*
-FUNCTION
- bfd_preserve_finish
-
-SYNOPSIS
- void bfd_preserve_finish (bfd *, struct bfd_preserve *);
-
-DESCRIPTION
- This function should be called when the bfd state saved by
- bfd_preserve_save is no longer needed. ie. when the back-end
- object_p function returns with success.
-
-*/
-
-void
-bfd_preserve_finish (bfd *abfd ATTRIBUTE_UNUSED, struct bfd_preserve *preserve)
-{
- /* It would be nice to be able to free more memory here, eg. old
- tdata, but that's not possible since these blocks are sitting
- inside bfd_alloc'd memory. The section hash is on a separate
- objalloc. */
- bfd_hash_table_free (&preserve->section_htab);
-}
-
/*
FUNCTION
bfd_emul_get_maxpagesize
SYNOPSIS
- bfd_vma bfd_emul_get_maxpagesize (const char *);
+ bfd_vma bfd_emul_get_maxpagesize (const char *);
DESCRIPTION
Returns the maximum page size, in bytes, as determined by
emulation.
RETURNS
- Returns the maximum page size in bytes for ELF, abort
- otherwise.
+ Returns the maximum page size in bytes for ELF, 0 otherwise.
*/
bfd_vma
&& target->flavour == bfd_target_elf_flavour)
return xvec_get_elf_backend_data (target)->maxpagesize;
- abort ();
return 0;
}
bfd_emul_set_maxpagesize
SYNOPSIS
- void bfd_emul_set_maxpagesize (const char *, bfd_vma);
+ void bfd_emul_set_maxpagesize (const char *, bfd_vma);
DESCRIPTION
For ELF, set the maximum page size for the emulation. It is
bfd_emul_get_commonpagesize
SYNOPSIS
- bfd_vma bfd_emul_get_commonpagesize (const char *);
+ bfd_vma bfd_emul_get_commonpagesize (const char *, bfd_boolean);
DESCRIPTION
Returns the common page size, in bytes, as determined by
emulation.
RETURNS
- Returns the common page size in bytes for ELF, abort otherwise.
+ Returns the common page size in bytes for ELF, 0 otherwise.
*/
bfd_vma
-bfd_emul_get_commonpagesize (const char *emul)
+bfd_emul_get_commonpagesize (const char *emul, bfd_boolean relro)
{
const bfd_target *target;
target = bfd_find_target (emul, NULL);
if (target != NULL
&& target->flavour == bfd_target_elf_flavour)
- return xvec_get_elf_backend_data (target)->commonpagesize;
+ {
+ const struct elf_backend_data *bed;
- abort ();
+ bed = xvec_get_elf_backend_data (target);
+ if (relro)
+ return bed->relropagesize;
+ else
+ return bed->commonpagesize;
+ }
return 0;
}
bfd_emul_set_commonpagesize
SYNOPSIS
- void bfd_emul_set_commonpagesize (const char *, bfd_vma);
+ void bfd_emul_set_commonpagesize (const char *, bfd_vma);
DESCRIPTION
For ELF, set the common page size for the emulation. It is
char *res, *alloc;
const char *pre, *suf;
size_t pre_len;
+ bfd_boolean skip_lead;
- if (abfd != NULL
- && *name != '\0'
- && bfd_get_symbol_leading_char (abfd) == *name)
+ skip_lead = (abfd != NULL
+ && *name != '\0'
+ && bfd_get_symbol_leading_char (abfd) == *name);
+ if (skip_lead)
++name;
/* This is a hack for better error reporting on XCOFF, PowerPC64-ELF
suf = strchr (name, '@');
if (suf != NULL)
{
- alloc = bfd_malloc (suf - name + 1);
+ alloc = (char *) bfd_malloc (suf - name + 1);
if (alloc == NULL)
return NULL;
memcpy (alloc, name, suf - name);
free (alloc);
if (res == NULL)
- return NULL;
+ {
+ if (skip_lead)
+ {
+ size_t len = strlen (pre) + 1;
+ alloc = (char *) bfd_malloc (len);
+ if (alloc == NULL)
+ return NULL;
+ memcpy (alloc, pre, len);
+ return alloc;
+ }
+ return NULL;
+ }
/* Put back any prefix or suffix. */
if (pre_len != 0 || suf != NULL)
if (suf == NULL)
suf = res + len;
suf_len = strlen (suf) + 1;
- final = bfd_malloc (pre_len + len + suf_len);
+ final = (char *) bfd_malloc (pre_len + len + suf_len);
if (final != NULL)
{
memcpy (final, pre, pre_len);
return res;
}
+
+/*
+FUNCTION
+ bfd_update_compression_header
+
+SYNOPSIS
+ void bfd_update_compression_header
+ (bfd *abfd, bfd_byte *contents, asection *sec);
+
+DESCRIPTION
+ Set the compression header at CONTENTS of SEC in ABFD and update
+ elf_section_flags for compression.
+*/
+
+void
+bfd_update_compression_header (bfd *abfd, bfd_byte *contents,
+ asection *sec)
+{
+ if ((abfd->flags & BFD_COMPRESS) != 0)
+ {
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+ {
+ if ((abfd->flags & BFD_COMPRESS_GABI) != 0)
+ {
+ const struct elf_backend_data *bed
+ = get_elf_backend_data (abfd);
+
+ /* Set the SHF_COMPRESSED bit. */
+ elf_section_flags (sec) |= SHF_COMPRESSED;
+
+ if (bed->s->elfclass == ELFCLASS32)
+ {
+ Elf32_External_Chdr *echdr
+ = (Elf32_External_Chdr *) contents;
+ bfd_put_32 (abfd, ELFCOMPRESS_ZLIB, &echdr->ch_type);
+ bfd_put_32 (abfd, sec->size, &echdr->ch_size);
+ bfd_put_32 (abfd, 1 << sec->alignment_power,
+ &echdr->ch_addralign);
+ /* bfd_log2 (alignof (Elf32_Chdr)) */
+ bfd_set_section_alignment (abfd, sec, 2);
+ }
+ else
+ {
+ Elf64_External_Chdr *echdr
+ = (Elf64_External_Chdr *) contents;
+ bfd_put_32 (abfd, ELFCOMPRESS_ZLIB, &echdr->ch_type);
+ bfd_put_32 (abfd, 0, &echdr->ch_reserved);
+ bfd_put_64 (abfd, sec->size, &echdr->ch_size);
+ bfd_put_64 (abfd, 1 << sec->alignment_power,
+ &echdr->ch_addralign);
+ /* bfd_log2 (alignof (Elf64_Chdr)) */
+ bfd_set_section_alignment (abfd, sec, 3);
+ }
+ }
+ else
+ {
+ /* Clear the SHF_COMPRESSED bit. */
+ elf_section_flags (sec) &= ~SHF_COMPRESSED;
+
+ /* Write the zlib header. It should be "ZLIB" followed by
+ the uncompressed section size, 8 bytes in big-endian
+ order. */
+ memcpy (contents, "ZLIB", 4);
+ bfd_putb64 (sec->size, contents + 4);
+ /* No way to keep the original alignment, just use 1 always. */
+ bfd_set_section_alignment (abfd, sec, 0);
+ }
+ }
+ }
+ else
+ abort ();
+}
+
+/*
+ FUNCTION
+ bfd_check_compression_header
+
+ SYNOPSIS
+ bfd_boolean bfd_check_compression_header
+ (bfd *abfd, bfd_byte *contents, asection *sec,
+ bfd_size_type *uncompressed_size,
+ unsigned int *uncompressed_alignment_power);
+
+DESCRIPTION
+ Check the compression header at CONTENTS of SEC in ABFD and
+ store the uncompressed size in UNCOMPRESSED_SIZE and the
+ uncompressed data alignment in UNCOMPRESSED_ALIGNMENT_POWER
+ if the compression header is valid.
+
+RETURNS
+ Return TRUE if the compression header is valid.
+*/
+
+bfd_boolean
+bfd_check_compression_header (bfd *abfd, bfd_byte *contents,
+ asection *sec,
+ bfd_size_type *uncompressed_size,
+ unsigned int *uncompressed_alignment_power)
+{
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && (elf_section_flags (sec) & SHF_COMPRESSED) != 0)
+ {
+ Elf_Internal_Chdr chdr;
+ const struct elf_backend_data *bed = get_elf_backend_data (abfd);
+ if (bed->s->elfclass == ELFCLASS32)
+ {
+ Elf32_External_Chdr *echdr = (Elf32_External_Chdr *) contents;
+ chdr.ch_type = bfd_get_32 (abfd, &echdr->ch_type);
+ chdr.ch_size = bfd_get_32 (abfd, &echdr->ch_size);
+ chdr.ch_addralign = bfd_get_32 (abfd, &echdr->ch_addralign);
+ }
+ else
+ {
+ Elf64_External_Chdr *echdr = (Elf64_External_Chdr *) contents;
+ chdr.ch_type = bfd_get_32 (abfd, &echdr->ch_type);
+ chdr.ch_size = bfd_get_64 (abfd, &echdr->ch_size);
+ chdr.ch_addralign = bfd_get_64 (abfd, &echdr->ch_addralign);
+ }
+ if (chdr.ch_type == ELFCOMPRESS_ZLIB
+ && chdr.ch_addralign == (1U << bfd_log2 (chdr.ch_addralign)))
+ {
+ *uncompressed_size = chdr.ch_size;
+ *uncompressed_alignment_power = bfd_log2 (chdr.ch_addralign);
+ return TRUE;
+ }
+ }
+
+ return FALSE;
+}
+
+/*
+FUNCTION
+ bfd_get_compression_header_size
+
+SYNOPSIS
+ int bfd_get_compression_header_size (bfd *abfd, asection *sec);
+
+DESCRIPTION
+ Return the size of the compression header of SEC in ABFD.
+
+RETURNS
+ Return the size of the compression header in bytes.
+*/
+
+int
+bfd_get_compression_header_size (bfd *abfd, asection *sec)
+{
+ if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+ {
+ if (sec == NULL)
+ {
+ if (!(abfd->flags & BFD_COMPRESS_GABI))
+ return 0;
+ }
+ else if (!(elf_section_flags (sec) & SHF_COMPRESSED))
+ return 0;
+
+ if (get_elf_backend_data (abfd)->s->elfclass == ELFCLASS32)
+ return sizeof (Elf32_External_Chdr);
+ else
+ return sizeof (Elf64_External_Chdr);
+ }
+
+ return 0;
+}
+
+/*
+FUNCTION
+ bfd_convert_section_size
+
+SYNOPSIS
+ bfd_size_type bfd_convert_section_size
+ (bfd *ibfd, asection *isec, bfd *obfd, bfd_size_type size);
+
+DESCRIPTION
+ Convert the size @var{size} of the section @var{isec} in input
+ BFD @var{ibfd} to the section size in output BFD @var{obfd}.
+*/
+
+bfd_size_type
+bfd_convert_section_size (bfd *ibfd, sec_ptr isec, bfd *obfd,
+ bfd_size_type size)
+{
+ bfd_size_type hdr_size;
+
+ /* Do nothing if either input or output aren't ELF. */
+ if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour
+ || bfd_get_flavour (obfd) != bfd_target_elf_flavour)
+ return size;
+
+ /* Do nothing if ELF classes of input and output are the same. */
+ if (get_elf_backend_data (ibfd)->s->elfclass
+ == get_elf_backend_data (obfd)->s->elfclass)
+ return size;
+
+ /* Convert GNU property size. */
+ if (CONST_STRNEQ (isec->name, NOTE_GNU_PROPERTY_SECTION_NAME))
+ return _bfd_elf_convert_gnu_property_size (ibfd, obfd);
+
+ /* Do nothing if input file will be decompressed. */
+ if ((ibfd->flags & BFD_DECOMPRESS))
+ return size;
+
+ /* Do nothing if the input section isn't a SHF_COMPRESSED section. */
+ hdr_size = bfd_get_compression_header_size (ibfd, isec);
+ if (hdr_size == 0)
+ return size;
+
+ /* Adjust the size of the output SHF_COMPRESSED section. */
+ if (hdr_size == sizeof (Elf32_External_Chdr))
+ return (size - sizeof (Elf32_External_Chdr)
+ + sizeof (Elf64_External_Chdr));
+ else
+ return (size - sizeof (Elf64_External_Chdr)
+ + sizeof (Elf32_External_Chdr));
+}
+
+/*
+FUNCTION
+ bfd_convert_section_contents
+
+SYNOPSIS
+ bfd_boolean bfd_convert_section_contents
+ (bfd *ibfd, asection *isec, bfd *obfd,
+ bfd_byte **ptr, bfd_size_type *ptr_size);
+
+DESCRIPTION
+ Convert the contents, stored in @var{*ptr}, of the section
+ @var{isec} in input BFD @var{ibfd} to output BFD @var{obfd}
+ if needed. The original buffer pointed to by @var{*ptr} may
+ be freed and @var{*ptr} is returned with memory malloc'd by this
+ function, and the new size written to @var{ptr_size}.
+*/
+
+bfd_boolean
+bfd_convert_section_contents (bfd *ibfd, sec_ptr isec, bfd *obfd,
+ bfd_byte **ptr, bfd_size_type *ptr_size)
+{
+ bfd_byte *contents;
+ bfd_size_type ihdr_size, ohdr_size, size;
+ Elf_Internal_Chdr chdr;
+ bfd_boolean use_memmove;
+
+ /* Do nothing if either input or output aren't ELF. */
+ if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour
+ || bfd_get_flavour (obfd) != bfd_target_elf_flavour)
+ return TRUE;
+
+ /* Do nothing if ELF classes of input and output are the same. */
+ if (get_elf_backend_data (ibfd)->s->elfclass
+ == get_elf_backend_data (obfd)->s->elfclass)
+ return TRUE;
+
+ /* Convert GNU properties. */
+ if (CONST_STRNEQ (isec->name, NOTE_GNU_PROPERTY_SECTION_NAME))
+ return _bfd_elf_convert_gnu_properties (ibfd, isec, obfd, ptr,
+ ptr_size);
+
+ /* Do nothing if input file will be decompressed. */
+ if ((ibfd->flags & BFD_DECOMPRESS))
+ return TRUE;
+
+ /* Do nothing if the input section isn't a SHF_COMPRESSED section. */
+ ihdr_size = bfd_get_compression_header_size (ibfd, isec);
+ if (ihdr_size == 0)
+ return TRUE;
+
+ contents = *ptr;
+
+ /* Convert the contents of the input SHF_COMPRESSED section to
+ output. Get the input compression header and the size of the
+ output compression header. */
+ if (ihdr_size == sizeof (Elf32_External_Chdr))
+ {
+ Elf32_External_Chdr *echdr = (Elf32_External_Chdr *) contents;
+ chdr.ch_type = bfd_get_32 (ibfd, &echdr->ch_type);
+ chdr.ch_size = bfd_get_32 (ibfd, &echdr->ch_size);
+ chdr.ch_addralign = bfd_get_32 (ibfd, &echdr->ch_addralign);
+
+ ohdr_size = sizeof (Elf64_External_Chdr);
+
+ use_memmove = FALSE;
+ }
+ else
+ {
+ Elf64_External_Chdr *echdr = (Elf64_External_Chdr *) contents;
+ chdr.ch_type = bfd_get_32 (ibfd, &echdr->ch_type);
+ chdr.ch_size = bfd_get_64 (ibfd, &echdr->ch_size);
+ chdr.ch_addralign = bfd_get_64 (ibfd, &echdr->ch_addralign);
+
+ ohdr_size = sizeof (Elf32_External_Chdr);
+ use_memmove = TRUE;
+ }
+
+ size = bfd_get_section_size (isec) - ihdr_size + ohdr_size;
+ if (!use_memmove)
+ {
+ contents = (bfd_byte *) bfd_malloc (size);
+ if (contents == NULL)
+ return FALSE;
+ }
+
+ /* Write out the output compression header. */
+ if (ohdr_size == sizeof (Elf32_External_Chdr))
+ {
+ Elf32_External_Chdr *echdr = (Elf32_External_Chdr *) contents;
+ bfd_put_32 (obfd, ELFCOMPRESS_ZLIB, &echdr->ch_type);
+ bfd_put_32 (obfd, chdr.ch_size, &echdr->ch_size);
+ bfd_put_32 (obfd, chdr.ch_addralign, &echdr->ch_addralign);
+ }
+ else
+ {
+ Elf64_External_Chdr *echdr = (Elf64_External_Chdr *) contents;
+ bfd_put_32 (obfd, ELFCOMPRESS_ZLIB, &echdr->ch_type);
+ bfd_put_32 (obfd, 0, &echdr->ch_reserved);
+ bfd_put_64 (obfd, chdr.ch_size, &echdr->ch_size);
+ bfd_put_64 (obfd, chdr.ch_addralign, &echdr->ch_addralign);
+ }
+
+ /* Copy the compressed contents. */
+ if (use_memmove)
+ memmove (contents + ohdr_size, *ptr + ihdr_size, size - ohdr_size);
+ else
+ {
+ memcpy (contents + ohdr_size, *ptr + ihdr_size, size - ohdr_size);
+ free (*ptr);
+ *ptr = contents;
+ }
+
+ *ptr_size = size;
+ return TRUE;
+}