/* Generic BFD library interface and support routines.
- Copyright (C) 1990-2017 Free Software Foundation, Inc.
+ Copyright (C) 1990-2019 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
. least-recently-used list of BFDs. *}
. struct bfd *lru_prev, *lru_next;
.
-. {* When a file is closed by the caching routines, BFD retains
-. state information on the file here... *}
+. {* Track current file position (or current buffer offset for
+. in-memory BFDs). When a file is closed by the caching routines,
+. BFD retains state information on the file here. *}
. ufile_ptr where;
.
. {* File modified time, if mtime_set is TRUE. *}
. the object_flags values have mostly just been copied from backend
. to another, and are not necessarily correct). *}
.
-.#define BFD_NO_FLAGS 0x00
+.#define BFD_NO_FLAGS 0x0
.
. {* BFD contains relocation entries. *}
-.#define HAS_RELOC 0x01
+.#define HAS_RELOC 0x1
.
. {* BFD is directly executable. *}
-.#define EXEC_P 0x02
+.#define EXEC_P 0x2
.
. {* BFD has line number information (basically used for F_LNNO in a
. COFF header). *}
-.#define HAS_LINENO 0x04
+.#define HAS_LINENO 0x4
.
. {* BFD has debugging information. *}
-.#define HAS_DEBUG 0x08
+.#define HAS_DEBUG 0x08
.
. {* BFD has symbols. *}
-.#define HAS_SYMS 0x10
+.#define HAS_SYMS 0x10
.
. {* BFD has local symbols (basically used for F_LSYMS in a COFF
. header). *}
-.#define HAS_LOCALS 0x20
+.#define HAS_LOCALS 0x20
.
. {* BFD is a dynamic object. *}
-.#define DYNAMIC 0x40
+.#define DYNAMIC 0x40
.
. {* Text section is write protected (if D_PAGED is not set, this is
. like an a.out NMAGIC file) (the linker sets this by default, but
. clears it for -r or -N). *}
-.#define WP_TEXT 0x80
+.#define WP_TEXT 0x80
.
. {* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
. linker sets this by default, but clears it for -r or -n or -N). *}
-.#define D_PAGED 0x100
+.#define D_PAGED 0x100
.
. {* BFD is relaxable (this means that bfd_relax_section may be able to
. do something) (sometimes bfd_relax_section can do something even if
. this is not set). *}
-.#define BFD_IS_RELAXABLE 0x200
+.#define BFD_IS_RELAXABLE 0x200
.
. {* This may be set before writing out a BFD to request using a
. traditional format. For example, this is used to request that when
. writing out an a.out object the symbols not be hashed to eliminate
. duplicates. *}
-.#define BFD_TRADITIONAL_FORMAT 0x400
+.#define BFD_TRADITIONAL_FORMAT 0x400
.
. {* This flag indicates that the BFD contents are actually cached
. in memory. If this is set, iostream points to a bfd_in_memory
. struct. *}
-.#define BFD_IN_MEMORY 0x800
+.#define BFD_IN_MEMORY 0x800
.
. {* This BFD has been created by the linker and doesn't correspond
. to any input file. *}
-.#define BFD_LINKER_CREATED 0x1000
+.#define BFD_LINKER_CREATED 0x1000
.
. {* This may be set before writing out a BFD to request that it
. be written using values for UIDs, GIDs, timestamps, etc. that
.#define BFD_DETERMINISTIC_OUTPUT 0x2000
.
. {* Compress sections in this BFD. *}
-.#define BFD_COMPRESS 0x4000
+.#define BFD_COMPRESS 0x4000
.
. {* Decompress sections in this BFD. *}
-.#define BFD_DECOMPRESS 0x8000
+.#define BFD_DECOMPRESS 0x8000
.
. {* BFD is a dummy, for plugins. *}
-.#define BFD_PLUGIN 0x10000
+.#define BFD_PLUGIN 0x10000
.
. {* Compress sections in this BFD with SHF_COMPRESSED from gABI. *}
-.#define BFD_COMPRESS_GABI 0x20000
+.#define BFD_COMPRESS_GABI 0x20000
.
. {* Convert ELF common symbol type to STT_COMMON or STT_OBJECT in this
. BFD. *}
-.#define BFD_CONVERT_ELF_COMMON 0x40000
+.#define BFD_CONVERT_ELF_COMMON 0x40000
.
. {* Use the ELF STT_COMMON type in this BFD. *}
-.#define BFD_USE_ELF_STT_COMMON 0x80000
+.#define BFD_USE_ELF_STT_COMMON 0x80000
.
. {* Flags bits to be saved in bfd_preserve_save. *}
.#define BFD_FLAGS_SAVED \
. {* Set if this is a plugin output file. *}
. unsigned int lto_output : 1;
.
+. {* Set if this is a slim LTO object not loaded with a compiler plugin. *}
+. unsigned int lto_slim_object : 1;
+.
. {* Set to dummy BFD created when claimed by a compiler plug-in
. library. *}
. bfd *plugin_dummy_bfd;
. struct bfd *archive_next; {* The next BFD in the archive. *}
. struct bfd *archive_head; {* The first BFD in the archive. *}
. struct bfd *nested_archives; {* List of nested archive in a flattened
-. thin archive. *}
+. thin archive. *}
.
. union {
. {* For input BFDs, a chain of BFDs involved in a link. *}
. {
. struct aout_data_struct *aout_data;
. struct artdata *aout_ar_data;
-. struct _oasys_data *oasys_obj_data;
-. struct _oasys_ar_data *oasys_ar_data;
. struct coff_tdata *coff_obj_data;
. struct pe_tdata *pe_obj_data;
. struct xcoff_tdata *xcoff_obj_data;
. struct ecoff_tdata *ecoff_obj_data;
-. struct ieee_data_struct *ieee_data;
-. struct ieee_ar_data_struct *ieee_ar_data;
. struct srec_data_struct *srec_data;
. struct verilog_data_struct *verilog_data;
. struct ihex_data_struct *ihex_data;
. struct tekhex_data_struct *tekhex_data;
. struct elf_obj_tdata *elf_obj_data;
-. struct nlm_obj_tdata *nlm_obj_data;
-. struct bout_data_struct *bout_data;
. struct mmo_data_struct *mmo_data;
. struct sun_core_struct *sun_core_data;
. struct sco5_core_struct *sco5_core_data;
individual documentation for precise semantics). On an error,
they call <<bfd_set_error>> to set an error condition that callers
can check by calling <<bfd_get_error>>.
- If that returns <<bfd_error_system_call>>, then check
+ If that returns <<bfd_error_system_call>>, then check
<<errno>>.
The easiest way to report a BFD error to the user is to
const char *const bfd_errmsgs[] =
{
- N_("No error"),
- N_("System call error"),
- N_("Invalid bfd target"),
- N_("File in wrong format"),
- N_("Archive object file in wrong format"),
- N_("Invalid operation"),
- N_("Memory exhausted"),
- N_("No symbols"),
- N_("Archive has no index; run ranlib to add one"),
- N_("No more archived files"),
- N_("Malformed archive"),
+ N_("no error"),
+ N_("system call error"),
+ N_("invalid bfd target"),
+ N_("file in wrong format"),
+ N_("archive object file in wrong format"),
+ N_("invalid operation"),
+ N_("memory exhausted"),
+ N_("no symbols"),
+ N_("archive has no index; run ranlib to add one"),
+ N_("no more archived files"),
+ N_("malformed archive"),
N_("DSO missing from command line"),
- N_("File format not recognized"),
- N_("File format is ambiguous"),
- N_("Section has no contents"),
- N_("Nonrepresentable section on output"),
- N_("Symbol needs debug section which does not exist"),
- N_("Bad value"),
- N_("File truncated"),
- N_("File too big"),
- N_("Error reading %s: %s"),
- N_("#<Invalid error code>")
+ N_("file format not recognized"),
+ N_("file format is ambiguous"),
+ N_("section has no contents"),
+ N_("nonrepresentable section on output"),
+ N_("symbol needs debug section which does not exist"),
+ N_("bad value"),
+ N_("file truncated"),
+ N_("file too big"),
+ N_("error reading %s: %s"),
+ N_("#<invalid error code>")
};
/*
static const char *_bfd_error_program_name;
-/* This macro and _doprnt taken from libiberty _doprnt.c, tidied a
- little and extended to handle '%A' and '%B'. 'L' as a modifer for
- integer formats is used for bfd_vma and bfd_size_type args, which
- vary in size depending on BFD configuration. */
+/* Support for positional parameters. */
+
+union _bfd_doprnt_args
+{
+ int i;
+ long l;
+ long long ll;
+ double d;
+ long double ld;
+ void *p;
+ enum
+ {
+ Bad,
+ Int,
+ Long,
+ LongLong,
+ Double,
+ LongDouble,
+ Ptr
+ } type;
+};
-#define PRINT_TYPE(TYPE) \
+/* This macro and _bfd_doprnt taken from libiberty _doprnt.c, tidied a
+ little and extended to handle '%pA', '%pB' and positional parameters. */
+
+#define PRINT_TYPE(TYPE, FIELD) \
do \
{ \
- TYPE value = va_arg (ap, TYPE); \
+ TYPE value = (TYPE) args[arg_no].FIELD; \
result = fprintf (stream, specifier, value); \
} while (0)
static int
-_doprnt (FILE *stream, const char *format, va_list ap)
+_bfd_doprnt (FILE *stream, const char *format, union _bfd_doprnt_args *args)
{
const char *ptr = format;
char specifier[128];
int total_printed = 0;
+ unsigned int arg_count = 0;
while (*ptr != '\0')
{
result = fprintf (stream, "%s", ptr);
ptr += result;
}
+ else if (ptr[1] == '%')
+ {
+ fputc ('%', stream);
+ result = 1;
+ ptr += 2;
+ }
else
{
/* We have a format specifier! */
char *sptr = specifier;
int wide_width = 0, short_width = 0;
+ unsigned int arg_no;
/* Copy the % and move forward. */
*sptr++ = *ptr++;
+ /* Check for a positional parameter. */
+ arg_no = -1u;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_no = *ptr - '1';
+ ptr += 2;
+ }
+
/* Move past flags. */
- while (strchr ("-+ #0", *ptr))
+ while (strchr ("-+ #0'I", *ptr))
*sptr++ = *ptr++;
if (*ptr == '*')
{
- int value = abs (va_arg (ap, int));
- sptr += sprintf (sptr, "%d", value);
+ int value;
+ unsigned int arg_index;
+
ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_index = *ptr - '1';
+ ptr += 2;
+ }
+ value = abs (args[arg_index].i);
+ arg_count++;
+ sptr += sprintf (sptr, "%d", value);
}
else
/* Handle explicit numeric value. */
while (ISDIGIT (*ptr))
*sptr++ = *ptr++;
+ /* Precision. */
if (*ptr == '.')
{
/* Copy and go past the period. */
*sptr++ = *ptr++;
if (*ptr == '*')
{
- int value = abs (va_arg (ap, int));
- sptr += sprintf (sptr, "%d", value);
+ int value;
+ unsigned int arg_index;
+
ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_index = *ptr - '1';
+ ptr += 2;
+ }
+ value = abs (args[arg_index].i);
+ arg_count++;
+ sptr += sprintf (sptr, "%d", value);
}
else
/* Handle explicit numeric value. */
/* Copy the type specifier, and NULL terminate. */
*sptr++ = *ptr++;
*sptr = '\0';
+ if ((int) arg_no < 0)
+ arg_no = arg_count;
switch (ptr[-1])
{
as an int and trust the C library printf to cast it
to the right width. */
if (short_width)
- PRINT_TYPE (int);
+ PRINT_TYPE (int, i);
else
{
- /* L modifier for bfd_vma or bfd_size_type may be
- either long long or long. */
- if (sptr[-2] == 'L')
- {
- sptr[-2] = 'l';
- if (BFD_ARCH_SIZE < 64 || BFD_HOST_64BIT_LONG)
- wide_width = 1;
- else
- {
- sptr[-1] = 'l';
- *sptr++ = ptr[-1];
- *sptr = '\0';
- }
- }
-
switch (wide_width)
{
case 0:
- PRINT_TYPE (int);
+ PRINT_TYPE (int, i);
break;
case 1:
- PRINT_TYPE (long);
+ PRINT_TYPE (long, l);
break;
case 2:
default:
*sptr = '\0';
#endif
#if defined (__GNUC__) || defined (HAVE_LONG_LONG)
- PRINT_TYPE (long long);
+ PRINT_TYPE (long long, ll);
#else
/* Fake it and hope for the best. */
- PRINT_TYPE (long);
+ PRINT_TYPE (long, l);
#endif
break;
}
case 'G':
{
if (wide_width == 0)
- PRINT_TYPE (double);
+ PRINT_TYPE (double, d);
else
{
#if defined (__GNUC__) || defined (HAVE_LONG_DOUBLE)
- PRINT_TYPE (long double);
+ PRINT_TYPE (long double, ld);
#else
/* Fake it and hope for the best. */
- PRINT_TYPE (double);
+ PRINT_TYPE (double, d);
#endif
}
}
break;
case 's':
- PRINT_TYPE (char *);
+ PRINT_TYPE (char *, p);
break;
case 'p':
- PRINT_TYPE (void *);
- break;
- case '%':
- fputc ('%', stream);
- result = 1;
+ if (*ptr == 'A')
+ {
+ asection *sec;
+ bfd *abfd;
+ const char *group = NULL;
+ struct coff_comdat_info *ci;
+
+ ptr++;
+ sec = (asection *) args[arg_no].p;
+ if (sec == NULL)
+ /* Invoking %pA with a null section pointer is an
+ internal error. */
+ abort ();
+ abfd = sec->owner;
+ if (abfd != NULL
+ && bfd_get_flavour (abfd) == bfd_target_elf_flavour
+ && elf_next_in_group (sec) != NULL
+ && (sec->flags & SEC_GROUP) == 0)
+ group = elf_group_name (sec);
+ else if (abfd != NULL
+ && bfd_get_flavour (abfd) == bfd_target_coff_flavour
+ && (ci = bfd_coff_get_comdat_section (sec->owner,
+ sec)) != NULL)
+ group = ci->name;
+ if (group != NULL)
+ result = fprintf (stream, "%s[%s]", sec->name, group);
+ else
+ result = fprintf (stream, "%s", sec->name);
+ }
+ else if (*ptr == 'B')
+ {
+ bfd *abfd;
+
+ ptr++;
+ abfd = (bfd *) args[arg_no].p;
+ if (abfd == NULL)
+ /* Invoking %pB with a null bfd pointer is an
+ internal error. */
+ abort ();
+ else if (abfd->my_archive
+ && !bfd_is_thin_archive (abfd->my_archive))
+ result = fprintf (stream, "%s(%s)",
+ abfd->my_archive->filename,
+ abfd->filename);
+ else
+ result = fprintf (stream, "%s", abfd->filename);
+ }
+ else
+ PRINT_TYPE (void *, p);
break;
- case 'A':
+ default:
+ abort();
+ }
+ arg_count++;
+ }
+ if (result == -1)
+ return -1;
+ total_printed += result;
+ }
+
+ return total_printed;
+}
+
+/* First pass over FORMAT to gather ARGS. Returns number of args. */
+
+static unsigned int
+_bfd_doprnt_scan (const char *format, union _bfd_doprnt_args *args)
+{
+ const char *ptr = format;
+ unsigned int arg_count = 0;
+
+ while (*ptr != '\0')
+ {
+ if (*ptr != '%')
+ {
+ ptr = strchr (ptr, '%');
+ if (ptr == NULL)
+ break;
+ }
+ else if (ptr[1] == '%')
+ ptr += 2;
+ else
+ {
+ int wide_width = 0, short_width = 0;
+ unsigned int arg_no;
+ int arg_type;
+
+ ptr++;
+
+ /* Check for a positional parameter. */
+ arg_no = -1u;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_no = *ptr - '1';
+ ptr += 2;
+ }
+
+ /* Move past flags. */
+ while (strchr ("-+ #0'I", *ptr))
+ ptr++;
+
+ if (*ptr == '*')
+ {
+ unsigned int arg_index;
+
+ ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_index = *ptr - '1';
+ ptr += 2;
+ }
+ if (arg_index >= 9)
+ abort ();
+ args[arg_index].type = Int;
+ arg_count++;
+ }
+ else
+ /* Handle explicit numeric value. */
+ while (ISDIGIT (*ptr))
+ ptr++;
+
+ /* Precision. */
+ if (*ptr == '.')
+ {
+ ptr++;
+ if (*ptr == '*')
+ {
+ unsigned int arg_index;
+
+ ptr++;
+ arg_index = arg_count;
+ if (*ptr != '0' && ISDIGIT (*ptr) && ptr[1] == '$')
+ {
+ arg_index = *ptr - '1';
+ ptr += 2;
+ }
+ if (arg_index >= 9)
+ abort ();
+ args[arg_index].type = Int;
+ arg_count++;
+ }
+ else
+ /* Handle explicit numeric value. */
+ while (ISDIGIT (*ptr))
+ ptr++;
+ }
+ while (strchr ("hlL", *ptr))
+ {
+ switch (*ptr)
+ {
+ case 'h':
+ short_width = 1;
+ break;
+ case 'l':
+ wide_width++;
+ break;
+ case 'L':
+ wide_width = 2;
+ break;
+ default:
+ abort();
+ }
+ ptr++;
+ }
+
+ ptr++;
+ if ((int) arg_no < 0)
+ arg_no = arg_count;
+
+ arg_type = Bad;
+ switch (ptr[-1])
+ {
+ case 'd':
+ case 'i':
+ case 'o':
+ case 'u':
+ case 'x':
+ case 'X':
+ case 'c':
{
- asection *sec = va_arg (ap, asection *);
- bfd *abfd;
- const char *group = NULL;
- struct coff_comdat_info *ci;
-
- if (sec == NULL)
- /* Invoking %A with a null section pointer is an
- internal error. */
- abort ();
- abfd = sec->owner;
- if (abfd != NULL
- && bfd_get_flavour (abfd) == bfd_target_elf_flavour
- && elf_next_in_group (sec) != NULL
- && (sec->flags & SEC_GROUP) == 0)
- group = elf_group_name (sec);
- else if (abfd != NULL
- && bfd_get_flavour (abfd) == bfd_target_coff_flavour
- && (ci = bfd_coff_get_comdat_section (sec->owner,
- sec)) != NULL)
- group = ci->name;
- if (group != NULL)
- result = fprintf (stream, "%s[%s]", sec->name, group);
+ if (short_width)
+ arg_type = Int;
else
- result = fprintf (stream, "%s", sec->name);
+ {
+ switch (wide_width)
+ {
+ case 0:
+ arg_type = Int;
+ break;
+ case 1:
+ arg_type = Long;
+ break;
+ case 2:
+ default:
+#if defined (__GNUC__) || defined (HAVE_LONG_LONG)
+ arg_type = LongLong;
+#else
+ arg_type = Long;
+#endif
+ break;
+ }
+ }
}
break;
- case 'B':
+ case 'f':
+ case 'e':
+ case 'E':
+ case 'g':
+ case 'G':
{
- bfd *abfd = va_arg (ap, bfd *);
-
- if (abfd == NULL)
- /* Invoking %B with a null bfd pointer is an
- internal error. */
- abort ();
- else if (abfd->my_archive
- && !bfd_is_thin_archive (abfd->my_archive))
- result = fprintf (stream, "%s(%s)",
- abfd->my_archive->filename, abfd->filename);
+ if (wide_width == 0)
+ arg_type = Double;
else
- result = fprintf (stream, "%s", abfd->filename);
+ {
+#if defined (__GNUC__) || defined (HAVE_LONG_DOUBLE)
+ arg_type = LongDouble;
+#else
+ arg_type = Double;
+#endif
+ }
}
break;
+ case 's':
+ arg_type = Ptr;
+ break;
+ case 'p':
+ if (*ptr == 'A' || *ptr == 'B')
+ ptr++;
+ arg_type = Ptr;
+ break;
default:
abort();
}
+
+ if (arg_no >= 9)
+ abort ();
+ args[arg_no].type = arg_type;
+ arg_count++;
}
- if (result == -1)
- return -1;
- total_printed += result;
}
- return total_printed;
+ return arg_count;
}
-/* This is the default routine to handle BFD error messages.
- Like fprintf (stderr, ...), but also handles some extra format specifiers.
-
- %A section name from section. For group components, print group name too.
- %B file name from bfd. For archive components, prints archive too. */
-
static void
error_handler_internal (const char *fmt, va_list ap)
{
+ unsigned int i, arg_count;
+ union _bfd_doprnt_args args[9];
+
+ for (i = 0; i < sizeof (args) / sizeof (args[0]); i++)
+ args[i].type = Bad;
+
+ arg_count = _bfd_doprnt_scan (fmt, args);
+ for (i = 0; i < arg_count; i++)
+ {
+ switch (args[i].type)
+ {
+ case Int:
+ args[i].i = va_arg (ap, int);
+ break;
+ case Long:
+ args[i].l = va_arg (ap, long);
+ break;
+ case LongLong:
+ args[i].ll = va_arg (ap, long long);
+ break;
+ case Double:
+ args[i].d = va_arg (ap, double);
+ break;
+ case LongDouble:
+ args[i].ld = va_arg (ap, long double);
+ break;
+ case Ptr:
+ args[i].p = va_arg (ap, void *);
+ break;
+ default:
+ abort ();
+ }
+ }
+
/* PR 4992: Don't interrupt output being sent to stdout. */
fflush (stdout);
else
fprintf (stderr, "BFD: ");
- _doprnt (stderr, fmt, ap);
+ _bfd_doprnt (stderr, fmt, args);
/* On AIX, putc is implemented as a macro that triggers a -Wunused-value
warning, so use the fputc function to avoid it. */
static bfd_error_handler_type _bfd_error_internal = error_handler_internal;
+/*
+FUNCTION
+ _bfd_error_handler
+
+SYNOPSIS
+ void _bfd_error_handler (const char *fmt, ...) ATTRIBUTE_PRINTF_1;
+
+DESCRIPTION
+ This is the default routine to handle BFD error messages.
+ Like fprintf (stderr, ...), but also handles some extra format
+ specifiers.
+
+ %pA section name from section. For group components, prints
+ group name too.
+ %pB file name from bfd. For archive components, prints
+ archive too.
+
+ Beware: Only supports a maximum of 9 format arguments.
+*/
+
void
_bfd_error_handler (const char *fmt, ...)
{
CODE_FRAGMENT
.
.typedef void (*bfd_assert_handler_type) (const char *bfd_formatmsg,
-. const char *bfd_version,
-. const char *bfd_file,
-. int bfd_line);
+. const char *bfd_version,
+. const char *bfd_file,
+. int bfd_line);
.
*/
The argument @var{abfd} is ignored.
.#define bfd_set_reloc(abfd, asect, location, count) \
-. BFD_SEND (abfd, _bfd_set_reloc, (abfd, asect, location, count))
+. BFD_SEND (abfd, _bfd_set_reloc, (abfd, asect, location, count))
*/
/*
bfd_get_arch_size
SYNOPSIS
- int bfd_get_arch_size (bfd *abfd);
+ int bfd_get_arch_size (bfd *abfd);
DESCRIPTION
Returns the normalized architecture address size, in bits, as
bfd_get_sign_extend_vma
SYNOPSIS
- int bfd_get_sign_extend_vma (bfd *abfd);
+ int bfd_get_sign_extend_vma (bfd *abfd);
DESCRIPTION
Indicates if the target architecture "naturally" sign extends
|| strcmp (name, "pei-x86-64") == 0
|| strcmp (name, "pe-arm-wince-little") == 0
|| strcmp (name, "pei-arm-wince-little") == 0
- || strcmp (name, "aixcoff-rs6000") == 0)
+ || strcmp (name, "aixcoff-rs6000") == 0
+ || strcmp (name, "aix5coff64-rs6000") == 0)
return 1;
if (CONST_STRNEQ (name, "mach-o"))
bfd_set_start_address
SYNOPSIS
- bfd_boolean bfd_set_start_address (bfd *abfd, bfd_vma vma);
+ bfd_boolean bfd_set_start_address (bfd *abfd, bfd_vma vma);
DESCRIPTION
Make @var{vma} the entry point of output BFD @var{abfd}.
Not enough memory exists to create private data for @var{obfd}.
.#define bfd_copy_private_header_data(ibfd, obfd) \
-. BFD_SEND (obfd, _bfd_copy_private_header_data, \
-. (ibfd, obfd))
+. BFD_SEND (obfd, _bfd_copy_private_header_data, \
+. (ibfd, obfd))
*/
Not enough memory exists to create private data for @var{obfd}.
.#define bfd_copy_private_bfd_data(ibfd, obfd) \
-. BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
-. (ibfd, obfd))
+. BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
+. (ibfd, obfd))
*/
Not enough memory exists to create private data for @var{obfd}.
.#define bfd_set_private_flags(abfd, flags) \
-. BFD_SEND (abfd, _bfd_set_private_flags, (abfd, flags))
+. BFD_SEND (abfd, _bfd_set_private_flags, (abfd, flags))
*/
The following functions exist but have not yet been documented.
.#define bfd_sizeof_headers(abfd, info) \
-. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, info))
+. BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, info))
.
.#define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
-. BFD_SEND (abfd, _bfd_find_nearest_line, \
-. (abfd, syms, sec, off, file, func, line, NULL))
+. BFD_SEND (abfd, _bfd_find_nearest_line, \
+. (abfd, syms, sec, off, file, func, line, NULL))
.
.#define bfd_find_nearest_line_discriminator(abfd, sec, syms, off, file, func, \
-. line, disc) \
-. BFD_SEND (abfd, _bfd_find_nearest_line, \
-. (abfd, syms, sec, off, file, func, line, disc))
+. line, disc) \
+. BFD_SEND (abfd, _bfd_find_nearest_line, \
+. (abfd, syms, sec, off, file, func, line, disc))
.
.#define bfd_find_line(abfd, syms, sym, file, line) \
-. BFD_SEND (abfd, _bfd_find_line, \
-. (abfd, syms, sym, file, line))
+. BFD_SEND (abfd, _bfd_find_line, \
+. (abfd, syms, sym, file, line))
.
.#define bfd_find_inliner_info(abfd, file, func, line) \
-. BFD_SEND (abfd, _bfd_find_inliner_info, \
-. (abfd, file, func, line))
+. BFD_SEND (abfd, _bfd_find_inliner_info, \
+. (abfd, file, func, line))
.
.#define bfd_debug_info_start(abfd) \
-. BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
+. BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
.
.#define bfd_debug_info_end(abfd) \
-. BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
+. BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
.
.#define bfd_debug_info_accumulate(abfd, section) \
-. BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
+. BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
.
.#define bfd_stat_arch_elt(abfd, stat) \
-. BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
+. BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
.
.#define bfd_update_armap_timestamp(abfd) \
-. BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
+. BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
.
.#define bfd_set_arch_mach(abfd, arch, mach)\
-. BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
+. BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
.
.#define bfd_relax_section(abfd, section, link_info, again) \
-. BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
+. BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
.
.#define bfd_gc_sections(abfd, link_info) \
. BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
. BFD_SEND (abfd, _bfd_final_link, (abfd, info))
.
.#define bfd_free_cached_info(abfd) \
-. BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
+. BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
.
.#define bfd_get_dynamic_symtab_upper_bound(abfd) \
. BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
bfd_emul_get_maxpagesize
SYNOPSIS
- bfd_vma bfd_emul_get_maxpagesize (const char *);
+ bfd_vma bfd_emul_get_maxpagesize (const char *);
DESCRIPTION
Returns the maximum page size, in bytes, as determined by
bfd_emul_set_maxpagesize
SYNOPSIS
- void bfd_emul_set_maxpagesize (const char *, bfd_vma);
+ void bfd_emul_set_maxpagesize (const char *, bfd_vma);
DESCRIPTION
For ELF, set the maximum page size for the emulation. It is
bfd_emul_get_commonpagesize
SYNOPSIS
- bfd_vma bfd_emul_get_commonpagesize (const char *);
+ bfd_vma bfd_emul_get_commonpagesize (const char *, bfd_boolean);
DESCRIPTION
Returns the common page size, in bytes, as determined by
*/
bfd_vma
-bfd_emul_get_commonpagesize (const char *emul)
+bfd_emul_get_commonpagesize (const char *emul, bfd_boolean relro)
{
const bfd_target *target;
target = bfd_find_target (emul, NULL);
if (target != NULL
&& target->flavour == bfd_target_elf_flavour)
- return xvec_get_elf_backend_data (target)->commonpagesize;
+ {
+ const struct elf_backend_data *bed;
+ bed = xvec_get_elf_backend_data (target);
+ if (relro)
+ return bed->relropagesize;
+ else
+ return bed->commonpagesize;
+ }
return 0;
}
bfd_emul_set_commonpagesize
SYNOPSIS
- void bfd_emul_set_commonpagesize (const char *, bfd_vma);
+ void bfd_emul_set_commonpagesize (const char *, bfd_vma);
DESCRIPTION
For ELF, set the common page size for the emulation. It is
bfd_put_32 (abfd, sec->size, &echdr->ch_size);
bfd_put_32 (abfd, 1 << sec->alignment_power,
&echdr->ch_addralign);
+ /* bfd_log2 (alignof (Elf32_Chdr)) */
+ bfd_set_section_alignment (abfd, sec, 2);
}
else
{
bfd_put_64 (abfd, sec->size, &echdr->ch_size);
bfd_put_64 (abfd, 1 << sec->alignment_power,
&echdr->ch_addralign);
+ /* bfd_log2 (alignof (Elf64_Chdr)) */
+ bfd_set_section_alignment (abfd, sec, 3);
}
}
else
order. */
memcpy (contents, "ZLIB", 4);
bfd_putb64 (sec->size, contents + 4);
+ /* No way to keep the original alignment, just use 1 always. */
+ bfd_set_section_alignment (abfd, sec, 0);
}
}
}
SYNOPSIS
bfd_boolean bfd_check_compression_header
(bfd *abfd, bfd_byte *contents, asection *sec,
- bfd_size_type *uncompressed_size);
+ bfd_size_type *uncompressed_size,
+ unsigned int *uncompressed_alignment_power);
DESCRIPTION
Check the compression header at CONTENTS of SEC in ABFD and
- store the uncompressed size in UNCOMPRESSED_SIZE if the
- compression header is valid.
+ store the uncompressed size in UNCOMPRESSED_SIZE and the
+ uncompressed data alignment in UNCOMPRESSED_ALIGNMENT_POWER
+ if the compression header is valid.
RETURNS
Return TRUE if the compression header is valid.
bfd_boolean
bfd_check_compression_header (bfd *abfd, bfd_byte *contents,
asection *sec,
- bfd_size_type *uncompressed_size)
+ bfd_size_type *uncompressed_size,
+ unsigned int *uncompressed_alignment_power)
{
if (bfd_get_flavour (abfd) == bfd_target_elf_flavour
&& (elf_section_flags (sec) & SHF_COMPRESSED) != 0)
chdr.ch_addralign = bfd_get_64 (abfd, &echdr->ch_addralign);
}
if (chdr.ch_type == ELFCOMPRESS_ZLIB
- && chdr.ch_addralign == 1U << sec->alignment_power)
+ && chdr.ch_addralign == (1U << bfd_log2 (chdr.ch_addralign)))
{
*uncompressed_size = chdr.ch_size;
+ *uncompressed_alignment_power = bfd_log2 (chdr.ch_addralign);
return TRUE;
}
}
{
bfd_size_type hdr_size;
- /* Do nothing if input file will be decompressed. */
- if ((ibfd->flags & BFD_DECOMPRESS))
- return size;
-
/* Do nothing if either input or output aren't ELF. */
if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour
|| bfd_get_flavour (obfd) != bfd_target_elf_flavour)
== get_elf_backend_data (obfd)->s->elfclass)
return size;
+ /* Convert GNU property size. */
+ if (CONST_STRNEQ (isec->name, NOTE_GNU_PROPERTY_SECTION_NAME))
+ return _bfd_elf_convert_gnu_property_size (ibfd, obfd);
+
+ /* Do nothing if input file will be decompressed. */
+ if ((ibfd->flags & BFD_DECOMPRESS))
+ return size;
+
/* Do nothing if the input section isn't a SHF_COMPRESSED section. */
hdr_size = bfd_get_compression_header_size (ibfd, isec);
if (hdr_size == 0)
Elf_Internal_Chdr chdr;
bfd_boolean use_memmove;
- /* Do nothing if input file will be decompressed. */
- if ((ibfd->flags & BFD_DECOMPRESS))
- return TRUE;
-
/* Do nothing if either input or output aren't ELF. */
if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour
|| bfd_get_flavour (obfd) != bfd_target_elf_flavour)
== get_elf_backend_data (obfd)->s->elfclass)
return TRUE;
+ /* Convert GNU properties. */
+ if (CONST_STRNEQ (isec->name, NOTE_GNU_PROPERTY_SECTION_NAME))
+ return _bfd_elf_convert_gnu_properties (ibfd, isec, obfd, ptr,
+ ptr_size);
+
+ /* Do nothing if input file will be decompressed. */
+ if ((ibfd->flags & BFD_DECOMPRESS))
+ return TRUE;
+
/* Do nothing if the input section isn't a SHF_COMPRESSED section. */
ihdr_size = bfd_get_compression_header_size (ibfd, isec);
if (ihdr_size == 0)