/* BFD back-end for ARM COFF files.
- Copyright 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
Written by Cygnus Support.
-This file is part of BFD, the Binary File Descriptor library.
+ This file is part of BFD, the Binary File Descriptor library.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
#include "bfd.h"
#include "sysdep.h"
#include "libbfd.h"
-
#include "coff/arm.h"
-
#include "coff/internal.h"
#ifdef COFF_WITH_PE
#include "libcoff.h"
-static bfd_reloc_status_type
-aoutarm_fix_pcrel_26_done PARAMS ((bfd *, arelent *, asymbol *, PTR,
- asection *, bfd *, char **));
+/* Macros for manipulation the bits in the flags field of the coff data
+ structure. */
+#define APCS_26_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_APCS_26)
-static bfd_reloc_status_type
-aoutarm_fix_pcrel_26 PARAMS ((bfd *, arelent *, asymbol *, PTR,
- asection *, bfd *, char **));
+#define APCS_FLOAT_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_APCS_FLOAT)
+
+#define PIC_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_PIC)
+
+#define APCS_SET(abfd) \
+ (coff_data (abfd)->flags & F_APCS_SET)
+
+#define SET_APCS_FLAGS(abfd, flgs) \
+ do \
+ { \
+ coff_data (abfd)->flags &= ~(F_APCS_26 | F_APCS_FLOAT | F_PIC); \
+ coff_data (abfd)->flags |= (flgs) | F_APCS_SET; \
+ } \
+ while (0)
+
+#define INTERWORK_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_INTERWORK)
+
+#define INTERWORK_SET(abfd) \
+ (coff_data (abfd)->flags & F_INTERWORK_SET)
+
+#define SET_INTERWORK_FLAG(abfd, flg) \
+ do \
+ { \
+ coff_data (abfd)->flags &= ~F_INTERWORK; \
+ coff_data (abfd)->flags |= (flg) | F_INTERWORK_SET; \
+ } \
+ while (0)
+
+#ifndef NUM_ELEM
+#define NUM_ELEM(a) ((sizeof (a)) / sizeof ((a)[0]))
+#endif
+
+typedef enum {bunknown, b9, b12, b23} thumb_pcrel_branchtype;
+/* Some typedefs for holding instructions. */
+typedef unsigned long int insn32;
+typedef unsigned short int insn16;
+
+/* The linker script knows the section names for placement.
+ The entry_names are used to do simple name mangling on the stubs.
+ Given a function name, and its type, the stub can be found. The
+ name can be changed. The only requirement is the %s be present. */
+#define THUMB2ARM_GLUE_SECTION_NAME ".glue_7t"
+#define THUMB2ARM_GLUE_ENTRY_NAME "__%s_from_thumb"
-static bfd_reloc_status_type coff_arm_reloc
- PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
-static boolean coff_arm_adjust_symndx
- PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *,
- struct internal_reloc *, boolean *));
+#define ARM2THUMB_GLUE_SECTION_NAME ".glue_7"
+#define ARM2THUMB_GLUE_ENTRY_NAME "__%s_from_arm"
+
+/* Used by the assembler. */
-/* Used by the assembler. */
static bfd_reloc_status_type
-coff_arm_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd,
- error_message)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+coff_arm_reloc (bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol ATTRIBUTE_UNUSED,
+ void * data,
+ asection *input_section ATTRIBUTE_UNUSED,
+ bfd *output_bfd,
+ char **error_message ATTRIBUTE_UNUSED)
{
symvalue diff;
- if (output_bfd == (bfd *) NULL)
+
+ if (output_bfd == NULL)
return bfd_reloc_continue;
diff = reloc_entry->addend;
-#define DOIT(x) \
- x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+#define DOIT(x) \
+ x = ((x & ~howto->dst_mask) \
+ | (((x & howto->src_mask) + diff) & howto->dst_mask))
if (diff != 0)
{
{
short x = bfd_get_16 (abfd, addr);
DOIT (x);
- bfd_put_16 (abfd, x, addr);
+ bfd_put_16 (abfd, (bfd_vma) x, addr);
}
break;
{
long x = bfd_get_32 (abfd, addr);
DOIT (x);
- bfd_put_32 (abfd, x, addr);
+ bfd_put_32 (abfd, (bfd_vma) x, addr);
}
break;
return bfd_reloc_continue;
}
+/* If USER_LABEL_PREFIX is defined as "_" (see coff_arm_is_local_label_name()
+ in this file), then TARGET_UNDERSCORE should be defined, otherwise it
+ should not. */
+#ifndef TARGET_UNDERSCORE
+#define TARGET_UNDERSCORE '_'
+#endif
+
#ifndef PCRELOFFSET
-#define PCRELOFFSET true
+#define PCRELOFFSET TRUE
#endif
-static reloc_howto_type aoutarm_std_reloc_howto[] =
-{
- /* type rs size bsz pcrel bitpos ovrf sf name part_inpl readmask setmask pcdone */
- HOWTO(0, /* type */
- 0, /* rs */
- 0, /* size */
- 8, /* bsz */
- false, /* pcrel */
- 0, /* bitpos */
- complain_overflow_bitfield, /* ovf */
- coff_arm_reloc, /* sf */
- "8", /*name */
- true, /* partial */
- 0x000000ff, /*read mask */
- 0x000000ff, /* setmask */
- PCRELOFFSET /* pcdone */),
- HOWTO(1,
- 0,
- 1,
- 16,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "16",
- true,
- 0x0000ffff,
- 0x0000ffff,
- PCRELOFFSET),
- HOWTO( 2,
- 0,
- 2,
- 32,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "32",
- true,
- 0xffffffff,
- 0xffffffff,
- PCRELOFFSET),
- HOWTO( 3,
- 2,
- 2,
- 26,
- true,
- 0,
- complain_overflow_signed,
- aoutarm_fix_pcrel_26 ,
- "ARM26",
- false,
- 0x00ffffff,
- 0x00ffffff,
- PCRELOFFSET),
- HOWTO( 4,
- 0,
- 0,
- 8,
- true,
- 0,
- complain_overflow_signed,
- coff_arm_reloc,
- "DISP8",
- true,
- 0x000000ff,
- 0x000000ff,
- true),
- HOWTO( 5,
- 0,
- 1,
- 16,
- true,
- 0,
- complain_overflow_signed,
- coff_arm_reloc,
- "DISP16",
- true,
- 0x0000ffff,
- 0x0000ffff,
- true),
- HOWTO( 6,
- 0,
- 2,
- 32,
- true,
- 0,
- complain_overflow_signed,
- coff_arm_reloc,
- "DISP32",
- true,
- 0xffffffff,
- 0xffffffff,
- true),
- HOWTO( 7,
- 2,
- 2,
- 26,
- false,
- 0,
- complain_overflow_signed,
- aoutarm_fix_pcrel_26_done,
- "ARM26D",
- true,
- 0x00ffffff,
- 0x0,
- false),
- {-1},
- HOWTO( 9,
- 0,
- -1,
- 16,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "NEG16",
- true,
- 0x0000ffff,
- 0x0000ffff,
- false),
- HOWTO( 10,
- 0,
- -2,
- 32,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "NEG32",
- true,
- 0xffffffff,
- 0xffffffff,
- false),
- HOWTO( 11,
- 0,
- 2,
- 32,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "rva32",
- true,
- 0xffffffff,
- 0xffffffff,
- PCRELOFFSET),
-};
+/* These most certainly belong somewhere else. Just had to get rid of
+ the manifest constants in the code. */
+#define ARM_8 0
+#define ARM_16 1
+#define ARM_32 2
+#define ARM_26 3
+#define ARM_DISP8 4
+#define ARM_DISP16 5
+#define ARM_DISP32 6
+#define ARM_26D 7
+/* 8 is unused. */
+#define ARM_NEG16 9
+#define ARM_NEG32 10
+#define ARM_RVA32 11
+#define ARM_THUMB9 12
+#define ARM_THUMB12 13
+#define ARM_THUMB23 14
+
+#ifdef ARM_WINCE
+#undef ARM_32
+#undef ARM_RVA32
+#undef ARM_26
+#undef ARM_THUMB12
+#undef ARM_26D
+
+#define ARM_26D 0
+#define ARM_32 1
+#define ARM_RVA32 2
+#define ARM_26 3
+#define ARM_THUMB12 4
+#define ARM_SECTION 14
+#define ARM_SECREL 15
+#endif
+
+static bfd_reloc_status_type aoutarm_fix_pcrel_26_done
+ (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
+static bfd_reloc_status_type aoutarm_fix_pcrel_26
+ (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
+static bfd_reloc_status_type coff_thumb_pcrel_12
+ (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
+#ifndef ARM_WINCE
+static bfd_reloc_status_type coff_thumb_pcrel_9
+ (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
+static bfd_reloc_status_type coff_thumb_pcrel_23
+ (bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
+#endif
+
+static reloc_howto_type aoutarm_std_reloc_howto[] =
+ {
+#ifdef ARM_WINCE
+ HOWTO (ARM_26D,
+ 2,
+ 2,
+ 24,
+ TRUE,
+ 0,
+ complain_overflow_dont,
+ aoutarm_fix_pcrel_26_done,
+ "ARM_26D",
+ FALSE,
+ 0x00ffffff,
+ 0x0,
+ PCRELOFFSET),
+ HOWTO (ARM_32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_32",
+ FALSE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_RVA32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_RVA32",
+ FALSE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_26,
+ 2,
+ 2,
+ 24,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ aoutarm_fix_pcrel_26 ,
+ "ARM_26",
+ FALSE,
+ 0x00ffffff,
+ 0x00ffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB12,
+ 1,
+ 1,
+ 11,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_12 ,
+ "ARM_THUMB12",
+ FALSE,
+ 0x000007ff,
+ 0x000007ff,
+ PCRELOFFSET),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ HOWTO (ARM_SECTION,
+ 0,
+ 1,
+ 16,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_SECTION",
+ FALSE,
+ 0x0000ffff,
+ 0x0000ffff,
+ PCRELOFFSET),
+ HOWTO (ARM_SECREL,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_SECREL",
+ FALSE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+#else /* not ARM_WINCE */
+ HOWTO (ARM_8,
+ 0,
+ 0,
+ 8,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_8",
+ TRUE,
+ 0x000000ff,
+ 0x000000ff,
+ PCRELOFFSET),
+ HOWTO (ARM_16,
+ 0,
+ 1,
+ 16,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ PCRELOFFSET),
+ HOWTO (ARM_32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_26,
+ 2,
+ 2,
+ 24,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ aoutarm_fix_pcrel_26 ,
+ "ARM_26",
+ FALSE,
+ 0x00ffffff,
+ 0x00ffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_DISP8,
+ 0,
+ 0,
+ 8,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_arm_reloc,
+ "ARM_DISP8",
+ TRUE,
+ 0x000000ff,
+ 0x000000ff,
+ TRUE),
+ HOWTO (ARM_DISP16,
+ 0,
+ 1,
+ 16,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_arm_reloc,
+ "ARM_DISP16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ TRUE),
+ HOWTO (ARM_DISP32,
+ 0,
+ 2,
+ 32,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_arm_reloc,
+ "ARM_DISP32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ TRUE),
+ HOWTO (ARM_26D,
+ 2,
+ 2,
+ 24,
+ FALSE,
+ 0,
+ complain_overflow_dont,
+ aoutarm_fix_pcrel_26_done,
+ "ARM_26D",
+ TRUE,
+ 0x00ffffff,
+ 0x0,
+ FALSE),
+ /* 8 is unused */
+ EMPTY_HOWTO (-1),
+ HOWTO (ARM_NEG16,
+ 0,
+ -1,
+ 16,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_NEG16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ FALSE),
+ HOWTO (ARM_NEG32,
+ 0,
+ -2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_NEG32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ FALSE),
+ HOWTO (ARM_RVA32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_RVA32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB9,
+ 1,
+ 1,
+ 8,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_9 ,
+ "ARM_THUMB9",
+ FALSE,
+ 0x000000ff,
+ 0x000000ff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB12,
+ 1,
+ 1,
+ 11,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_12 ,
+ "ARM_THUMB12",
+ FALSE,
+ 0x000007ff,
+ 0x000007ff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB23,
+ 1,
+ 2,
+ 22,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_23 ,
+ "ARM_THUMB23",
+ FALSE,
+ 0x07ff07ff,
+ 0x07ff07ff,
+ PCRELOFFSET)
+#endif /* not ARM_WINCE */
+ };
+
+#define NUM_RELOCS NUM_ELEM (aoutarm_std_reloc_howto)
+
#ifdef COFF_WITH_PE
-/* Return true if this relocation should
- appear in the output .reloc section. */
+/* Return TRUE if this relocation should
+ appear in the output .reloc section. */
-static boolean in_reloc_p (abfd, howto)
- bfd * abfd;
- reloc_howto_type *howto;
+static bfd_boolean
+in_reloc_p (bfd * abfd ATTRIBUTE_UNUSED,
+ reloc_howto_type * howto)
{
- return !howto->pc_relative && howto->type != 11;
-}
+ return !howto->pc_relative && howto->type != ARM_RVA32;
+}
#endif
-
-#define RTYPE2HOWTO(cache_ptr, dst) \
- (cache_ptr)->howto = aoutarm_std_reloc_howto + (dst)->r_type;
+#define RTYPE2HOWTO(cache_ptr, dst) \
+ (cache_ptr)->howto = \
+ (dst)->r_type < NUM_RELOCS \
+ ? aoutarm_std_reloc_howto + (dst)->r_type \
+ : NULL
#define coff_rtype_to_howto coff_arm_rtype_to_howto
static reloc_howto_type *
-coff_arm_rtype_to_howto (abfd, sec, rel, h, sym, addendp)
- bfd *abfd;
- asection *sec;
- struct internal_reloc *rel;
- struct coff_link_hash_entry *h;
- struct internal_syment *sym;
- bfd_vma *addendp;
+coff_arm_rtype_to_howto (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *sec,
+ struct internal_reloc *rel,
+ struct coff_link_hash_entry *h ATTRIBUTE_UNUSED,
+ struct internal_syment *sym ATTRIBUTE_UNUSED,
+ bfd_vma *addendp)
{
- reloc_howto_type *howto;
+ reloc_howto_type * howto;
- howto = aoutarm_std_reloc_howto + rel->r_type;
+ if (rel->r_type >= NUM_RELOCS)
+ return NULL;
- if (rel->r_type == 11)
- {
- *addendp -= pe_data(sec->output_section->owner)->pe_opthdr.ImageBase;
- }
+ howto = aoutarm_std_reloc_howto + rel->r_type;
- /* The relocation_section function will skip pcrel_offset relocs
- when doing a relocateable link. However, we want to convert
- ARM26 to ARM26D relocs if possible. We return a fake howto in
- this case without pcrel_offset set, and adjust the addend to
- compensate. */
- if (rel->r_type == 3
- && h != NULL
- && (h->root.type == bfd_link_hash_defined
- || h->root.type == bfd_link_hash_defweak)
- && h->root.u.def.section->output_section == sec->output_section)
- {
- static reloc_howto_type fake_arm26_reloc =
- HOWTO (3,
- 2,
- 2,
- 26,
- true,
- 0,
- complain_overflow_signed,
- aoutarm_fix_pcrel_26 ,
- "ARM26",
- false,
- 0x00ffffff,
- 0x00ffffff,
- false);
-
- *addendp -= rel->r_vaddr - sec->vma;
- return &fake_arm26_reloc;
- }
+ if (rel->r_type == ARM_RVA32)
+ *addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase;
return howto;
-
}
-/* Used by the assembler. */
+
+/* Used by the assembler. */
static bfd_reloc_status_type
-aoutarm_fix_pcrel_26_done (abfd, reloc_entry, symbol, data, input_section,
- output_bfd, error_message)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+aoutarm_fix_pcrel_26_done (bfd *abfd ATTRIBUTE_UNUSED,
+ arelent *reloc_entry ATTRIBUTE_UNUSED,
+ asymbol *symbol ATTRIBUTE_UNUSED,
+ void * data ATTRIBUTE_UNUSED,
+ asection *input_section ATTRIBUTE_UNUSED,
+ bfd *output_bfd ATTRIBUTE_UNUSED,
+ char **error_message ATTRIBUTE_UNUSED)
{
/* This is dead simple at present. */
return bfd_reloc_ok;
}
-/* Used by the assembler. */
+/* Used by the assembler. */
static bfd_reloc_status_type
-aoutarm_fix_pcrel_26 (abfd, reloc_entry, symbol, data, input_section,
- output_bfd, error_message)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+aoutarm_fix_pcrel_26 (bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message ATTRIBUTE_UNUSED)
{
bfd_vma relocation;
bfd_size_type addr = reloc_entry->address;
long target = bfd_get_32 (abfd, (bfd_byte *) data + addr);
bfd_reloc_status_type flag = bfd_reloc_ok;
-
- /* If this is an undefined symbol, return error */
+
+ /* If this is an undefined symbol, return error. */
if (symbol->section == &bfd_und_section
&& (symbol->flags & BSF_WEAK) == 0)
return output_bfd ? bfd_reloc_continue : bfd_reloc_undefined;
return bfd_reloc_continue;
relocation = (target & 0x00ffffff) << 2;
- relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend */
+ relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend. */
relocation += symbol->value;
relocation += symbol->section->output_section->vma;
relocation += symbol->section->output_offset;
relocation -= input_section->output_section->vma;
relocation -= input_section->output_offset;
relocation -= addr;
+
if (relocation & 3)
return bfd_reloc_overflow;
- /* Check for overflow */
+ /* Check for overflow. */
if (relocation & 0x02000000)
{
- if ((relocation & ~0x03ffffff) != ~0x03ffffff)
+ if ((relocation & ~ (bfd_vma) 0x03ffffff) != ~ (bfd_vma) 0x03ffffff)
flag = bfd_reloc_overflow;
}
- else if (relocation & ~0x03ffffff)
+ else if (relocation & ~(bfd_vma) 0x03ffffff)
flag = bfd_reloc_overflow;
target &= ~0x00ffffff;
target |= (relocation >> 2) & 0x00ffffff;
- bfd_put_32 (abfd, target, (bfd_byte *) data + addr);
+ bfd_put_32 (abfd, (bfd_vma) target, (bfd_byte *) data + addr);
/* Now the ARM magic... Change the reloc type so that it is marked as done.
Strictly this is only necessary if we are doing a partial relocation. */
- reloc_entry->howto = &aoutarm_std_reloc_howto[7];
+ reloc_entry->howto = &aoutarm_std_reloc_howto[ARM_26D];
return flag;
}
+static bfd_reloc_status_type
+coff_thumb_pcrel_common (bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message ATTRIBUTE_UNUSED,
+ thumb_pcrel_branchtype btype)
+{
+ bfd_vma relocation = 0;
+ bfd_size_type addr = reloc_entry->address;
+ long target = bfd_get_32 (abfd, (bfd_byte *) data + addr);
+ bfd_reloc_status_type flag = bfd_reloc_ok;
+ bfd_vma dstmsk;
+ bfd_vma offmsk;
+ bfd_vma signbit;
+
+ /* NOTE: This routine is currently used by GAS, but not by the link
+ phase. */
+ switch (btype)
+ {
+ case b9:
+ dstmsk = 0x000000ff;
+ offmsk = 0x000001fe;
+ signbit = 0x00000100;
+ break;
+
+ case b12:
+ dstmsk = 0x000007ff;
+ offmsk = 0x00000ffe;
+ signbit = 0x00000800;
+ break;
+
+ case b23:
+ dstmsk = 0x07ff07ff;
+ offmsk = 0x007fffff;
+ signbit = 0x00400000;
+ break;
+
+ default:
+ abort ();
+ }
+
+ /* If this is an undefined symbol, return error. */
+ if (symbol->section == &bfd_und_section
+ && (symbol->flags & BSF_WEAK) == 0)
+ return output_bfd ? bfd_reloc_continue : bfd_reloc_undefined;
+
+ /* If the sections are different, and we are doing a partial relocation,
+ just ignore it for now. */
+ if (symbol->section->name != input_section->name
+ && output_bfd != (bfd *)NULL)
+ return bfd_reloc_continue;
-static CONST struct reloc_howto_struct *
-arm_reloc_type_lookup(abfd,code)
- bfd *abfd;
- bfd_reloc_code_real_type code;
+ switch (btype)
+ {
+ case b9:
+ case b12:
+ relocation = ((target & dstmsk) << 1);
+ break;
+
+ case b23:
+ if (bfd_big_endian (abfd))
+ relocation = ((target & 0x7ff) << 1) | ((target & 0x07ff0000) >> 4);
+ else
+ relocation = ((target & 0x7ff) << 12) | ((target & 0x07ff0000) >> 15);
+ break;
+
+ default:
+ abort ();
+ }
+
+ relocation = (relocation ^ signbit) - signbit; /* Sign extend. */
+ relocation += symbol->value;
+ relocation += symbol->section->output_section->vma;
+ relocation += symbol->section->output_offset;
+ relocation += reloc_entry->addend;
+ relocation -= input_section->output_section->vma;
+ relocation -= input_section->output_offset;
+ relocation -= addr;
+
+ if (relocation & 1)
+ return bfd_reloc_overflow;
+
+ /* Check for overflow. */
+ if (relocation & signbit)
+ {
+ if ((relocation & ~offmsk) != ~offmsk)
+ flag = bfd_reloc_overflow;
+ }
+ else if (relocation & ~offmsk)
+ flag = bfd_reloc_overflow;
+
+ target &= ~dstmsk;
+ switch (btype)
+ {
+ case b9:
+ case b12:
+ target |= (relocation >> 1);
+ break;
+
+ case b23:
+ if (bfd_big_endian (abfd))
+ target |= (((relocation & 0xfff) >> 1)
+ | ((relocation << 4) & 0x07ff0000));
+ else
+ target |= (((relocation & 0xffe) << 15)
+ | ((relocation >> 12) & 0x7ff));
+ break;
+
+ default:
+ abort ();
+ }
+
+ bfd_put_32 (abfd, (bfd_vma) target, (bfd_byte *) data + addr);
+
+ /* Now the ARM magic... Change the reloc type so that it is marked as done.
+ Strictly this is only necessary if we are doing a partial relocation. */
+ reloc_entry->howto = & aoutarm_std_reloc_howto [ARM_26D];
+
+ /* TODO: We should possibly have DONE entries for the THUMB PCREL relocations. */
+ return flag;
+}
+
+#ifndef ARM_WINCE
+static bfd_reloc_status_type
+coff_thumb_pcrel_23 (bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message)
{
-#define ASTD(i,j) case i: return &aoutarm_std_reloc_howto[j]
+ return coff_thumb_pcrel_common (abfd, reloc_entry, symbol, data,
+ input_section, output_bfd, error_message,
+ b23);
+}
+
+static bfd_reloc_status_type
+coff_thumb_pcrel_9 (bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message)
+{
+ return coff_thumb_pcrel_common (abfd, reloc_entry, symbol, data,
+ input_section, output_bfd, error_message,
+ b9);
+}
+#endif /* not ARM_WINCE */
+
+static bfd_reloc_status_type
+coff_thumb_pcrel_12 (bfd *abfd,
+ arelent *reloc_entry,
+ asymbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message)
+{
+ return coff_thumb_pcrel_common (abfd, reloc_entry, symbol, data,
+ input_section, output_bfd, error_message,
+ b12);
+}
+
+static const struct reloc_howto_struct *
+coff_arm_reloc_type_lookup (bfd * abfd, bfd_reloc_code_real_type code)
+{
+#define ASTD(i,j) case i: return aoutarm_std_reloc_howto + j
+
if (code == BFD_RELOC_CTOR)
switch (bfd_get_arch_info (abfd)->bits_per_address)
{
case 32:
code = BFD_RELOC_32;
break;
- default: return (CONST struct reloc_howto_struct *) 0;
+ default:
+ return NULL;
}
switch (code)
{
- ASTD (BFD_RELOC_16, 1);
- ASTD (BFD_RELOC_32, 2);
- ASTD (BFD_RELOC_ARM_PCREL_BRANCH, 3);
- ASTD (BFD_RELOC_8_PCREL, 4);
- ASTD (BFD_RELOC_16_PCREL, 5);
- ASTD (BFD_RELOC_32_PCREL, 6);
- ASTD (BFD_RELOC_RVA, 11);
- default: return (CONST struct reloc_howto_struct *) 0;
+#ifdef ARM_WINCE
+ ASTD (BFD_RELOC_32, ARM_32);
+ ASTD (BFD_RELOC_RVA, ARM_RVA32);
+ ASTD (BFD_RELOC_ARM_PCREL_BRANCH, ARM_26);
+ ASTD (BFD_RELOC_THUMB_PCREL_BRANCH12, ARM_THUMB12);
+#else
+ ASTD (BFD_RELOC_8, ARM_8);
+ ASTD (BFD_RELOC_16, ARM_16);
+ ASTD (BFD_RELOC_32, ARM_32);
+ ASTD (BFD_RELOC_ARM_PCREL_BRANCH, ARM_26);
+ ASTD (BFD_RELOC_ARM_PCREL_BLX, ARM_26);
+ ASTD (BFD_RELOC_8_PCREL, ARM_DISP8);
+ ASTD (BFD_RELOC_16_PCREL, ARM_DISP16);
+ ASTD (BFD_RELOC_32_PCREL, ARM_DISP32);
+ ASTD (BFD_RELOC_RVA, ARM_RVA32);
+ ASTD (BFD_RELOC_THUMB_PCREL_BRANCH9, ARM_THUMB9);
+ ASTD (BFD_RELOC_THUMB_PCREL_BRANCH12, ARM_THUMB12);
+ ASTD (BFD_RELOC_THUMB_PCREL_BRANCH23, ARM_THUMB23);
+ ASTD (BFD_RELOC_THUMB_PCREL_BLX, ARM_THUMB23);
+#endif
+ default: return NULL;
}
}
+#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 2
+#define COFF_PAGE_SIZE 0x1000
-#define coff_bfd_reloc_type_lookup arm_reloc_type_lookup
+/* Turn a howto into a reloc nunmber. */
+#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
+#define BADMAG(x) ARMBADMAG(x)
+#define ARM 1 /* Customize coffcode.h. */
+
+#ifndef ARM_WINCE
+/* Make sure that the 'r_offset' field is copied properly
+ so that identical binaries will compare the same. */
+#define SWAP_IN_RELOC_OFFSET H_GET_32
+#define SWAP_OUT_RELOC_OFFSET H_PUT_32
+#endif
-#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (2)
-#define COFF_PAGE_SIZE 0x1000
-/* Turn a howto into a reloc nunmber */
+/* Extend the coff_link_hash_table structure with a few ARM specific fields.
+ This allows us to store global data here without actually creating any
+ global variables, which is a no-no in the BFD world. */
+struct coff_arm_link_hash_table
+ {
+ /* The original coff_link_hash_table structure. MUST be first field. */
+ struct coff_link_hash_table root;
-#define SELECT_RELOC(x,howto) { x.r_type = howto->type; }
-#define BADMAG(x) ARMBADMAG(x)
-#define ARM 1 /* Customize coffcode.h */
+ /* The size in bytes of the section containing the Thumb-to-ARM glue. */
+ bfd_size_type thumb_glue_size;
+
+ /* The size in bytes of the section containing the ARM-to-Thumb glue. */
+ bfd_size_type arm_glue_size;
+
+ /* An arbitrary input BFD chosen to hold the glue sections. */
+ bfd * bfd_of_glue_owner;
+
+ /* Support interworking with old, non-interworking aware ARM code. */
+ int support_old_code;
+};
+
+/* Get the ARM coff linker hash table from a link_info structure. */
+#define coff_arm_hash_table(info) \
+ ((struct coff_arm_link_hash_table *) ((info)->hash))
+
+/* Create an ARM coff linker hash table. */
+
+static struct bfd_link_hash_table *
+coff_arm_link_hash_table_create (bfd * abfd)
+{
+ struct coff_arm_link_hash_table * ret;
+ bfd_size_type amt = sizeof (struct coff_arm_link_hash_table);
+
+ ret = bfd_malloc (amt);
+ if (ret == NULL)
+ return NULL;
+
+ if (! _bfd_coff_link_hash_table_init
+ (& ret->root, abfd, _bfd_coff_link_hash_newfunc))
+ {
+ free (ret);
+ return NULL;
+ }
+
+ ret->thumb_glue_size = 0;
+ ret->arm_glue_size = 0;
+ ret->bfd_of_glue_owner = NULL;
+
+ return & ret->root.root;
+}
+
+static void
+arm_emit_base_file_entry (struct bfd_link_info *info,
+ bfd *output_bfd,
+ asection *input_section,
+ bfd_vma reloc_offset)
+{
+ bfd_vma addr = reloc_offset
+ - input_section->vma
+ + input_section->output_offset
+ + input_section->output_section->vma;
+
+ if (coff_data (output_bfd)->pe)
+ addr -= pe_data (output_bfd)->pe_opthdr.ImageBase;
+ fwrite (& addr, 1, sizeof (addr), (FILE *) info->base_file);
+
+}
+\f
+#ifndef ARM_WINCE
+/* The thumb form of a long branch is a bit finicky, because the offset
+ encoding is split over two fields, each in it's own instruction. They
+ can occur in any order. So given a thumb form of long branch, and an
+ offset, insert the offset into the thumb branch and return finished
+ instruction.
+
+ It takes two thumb instructions to encode the target address. Each has
+ 11 bits to invest. The upper 11 bits are stored in one (identified by
+ H-0.. see below), the lower 11 bits are stored in the other (identified
+ by H-1).
+
+ Combine together and shifted left by 1 (it's a half word address) and
+ there you have it.
+
+ Op: 1111 = F,
+ H-0, upper address-0 = 000
+ Op: 1111 = F,
+ H-1, lower address-0 = 800
+
+ They can be ordered either way, but the arm tools I've seen always put
+ the lower one first. It probably doesn't matter. krk@cygnus.com
+
+ XXX: Actually the order does matter. The second instruction (H-1)
+ moves the computed address into the PC, so it must be the second one
+ in the sequence. The problem, however is that whilst little endian code
+ stores the instructions in HI then LOW order, big endian code does the
+ reverse. nickc@cygnus.com. */
+
+#define LOW_HI_ORDER 0xF800F000
+#define HI_LOW_ORDER 0xF000F800
+
+static insn32
+insert_thumb_branch (insn32 br_insn, int rel_off)
+{
+ unsigned int low_bits;
+ unsigned int high_bits;
+
+ BFD_ASSERT ((rel_off & 1) != 1);
+
+ rel_off >>= 1; /* Half word aligned address. */
+ low_bits = rel_off & 0x000007FF; /* The bottom 11 bits. */
+ high_bits = (rel_off >> 11) & 0x000007FF; /* The top 11 bits. */
+
+ if ((br_insn & LOW_HI_ORDER) == LOW_HI_ORDER)
+ br_insn = LOW_HI_ORDER | (low_bits << 16) | high_bits;
+ else if ((br_insn & HI_LOW_ORDER) == HI_LOW_ORDER)
+ br_insn = HI_LOW_ORDER | (high_bits << 16) | low_bits;
+ else
+ /* FIXME: the BFD library should never abort except for internal errors
+ - it should return an error status. */
+ abort (); /* Error - not a valid branch instruction form. */
+
+ return br_insn;
+}
+
+\f
+static struct coff_link_hash_entry *
+find_thumb_glue (struct bfd_link_info *info,
+ const char *name,
+ bfd *input_bfd)
+{
+ char *tmp_name;
+ struct coff_link_hash_entry *myh;
+ bfd_size_type amt = strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1;
+
+ tmp_name = bfd_malloc (amt);
+
+ BFD_ASSERT (tmp_name);
+
+ sprintf (tmp_name, THUMB2ARM_GLUE_ENTRY_NAME, name);
+
+ myh = coff_link_hash_lookup
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
+ if (myh == NULL)
+ /* xgettext:c-format */
+ _bfd_error_handler (_("%B: unable to find THUMB glue '%s' for `%s'"),
+ input_bfd, tmp_name, name);
+
+ free (tmp_name);
+
+ return myh;
+}
+#endif /* not ARM_WINCE */
+
+static struct coff_link_hash_entry *
+find_arm_glue (struct bfd_link_info *info,
+ const char *name,
+ bfd *input_bfd)
+{
+ char *tmp_name;
+ struct coff_link_hash_entry * myh;
+ bfd_size_type amt = strlen (name) + strlen (ARM2THUMB_GLUE_ENTRY_NAME) + 1;
+
+ tmp_name = bfd_malloc (amt);
+
+ BFD_ASSERT (tmp_name);
+
+ sprintf (tmp_name, ARM2THUMB_GLUE_ENTRY_NAME, name);
+
+ myh = coff_link_hash_lookup
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
+ if (myh == NULL)
+ /* xgettext:c-format */
+ _bfd_error_handler (_("%B: unable to find ARM glue '%s' for `%s'"),
+ input_bfd, tmp_name, name);
+
+ free (tmp_name);
+
+ return myh;
+}
+
+/*
+ ARM->Thumb glue:
+
+ .arm
+ __func_from_arm:
+ ldr r12, __func_addr
+ bx r12
+ __func_addr:
+ .word func @ behave as if you saw a ARM_32 reloc
+*/
+
+#define ARM2THUMB_GLUE_SIZE 12
+static const insn32 a2t1_ldr_insn = 0xe59fc000;
+static const insn32 a2t2_bx_r12_insn = 0xe12fff1c;
+static const insn32 a2t3_func_addr_insn = 0x00000001;
+
+/*
+ Thumb->ARM: Thumb->(non-interworking aware) ARM
+
+ .thumb .thumb
+ .align 2 .align 2
+ __func_from_thumb: __func_from_thumb:
+ bx pc push {r6, lr}
+ nop ldr r6, __func_addr
+ .arm mov lr, pc
+ __func_change_to_arm: bx r6
+ b func .arm
+ __func_back_to_thumb:
+ ldmia r13! {r6, lr}
+ bx lr
+ __func_addr:
+ .word func
+*/
+
+#define THUMB2ARM_GLUE_SIZE (globals->support_old_code ? 20 : 8)
+#ifndef ARM_WINCE
+static const insn16 t2a1_bx_pc_insn = 0x4778;
+static const insn16 t2a2_noop_insn = 0x46c0;
+static const insn32 t2a3_b_insn = 0xea000000;
+
+static const insn16 t2a1_push_insn = 0xb540;
+static const insn16 t2a2_ldr_insn = 0x4e03;
+static const insn16 t2a3_mov_insn = 0x46fe;
+static const insn16 t2a4_bx_insn = 0x4730;
+static const insn32 t2a5_pop_insn = 0xe8bd4040;
+static const insn32 t2a6_bx_insn = 0xe12fff1e;
+#endif
+
+/* TODO:
+ We should really create new local (static) symbols in destination
+ object for each stub we create. We should also create local
+ (static) symbols within the stubs when switching between ARM and
+ Thumb code. This will ensure that the debugger and disassembler
+ can present a better view of stubs.
+
+ We can treat stubs like literal sections, and for the THUMB9 ones
+ (short addressing range) we should be able to insert the stubs
+ between sections. i.e. the simplest approach (since relocations
+ are done on a section basis) is to dump the stubs at the end of
+ processing a section. That way we can always try and minimise the
+ offset to and from a stub. However, this does not map well onto
+ the way that the linker/BFD does its work: mapping all input
+ sections to output sections via the linker script before doing
+ all the processing.
+
+ Unfortunately it may be easier to just to disallow short range
+ Thumb->ARM stubs (i.e. no conditional inter-working branches,
+ only branch-and-link (BL) calls. This will simplify the processing
+ since we can then put all of the stubs into their own section.
+
+ TODO:
+ On a different subject, rather than complaining when a
+ branch cannot fit in the number of bits available for the
+ instruction we should generate a trampoline stub (needed to
+ address the complete 32bit address space). */
+
+/* The standard COFF backend linker does not cope with the special
+ Thumb BRANCH23 relocation. The alternative would be to split the
+ BRANCH23 into seperate HI23 and LO23 relocations. However, it is a
+ bit simpler simply providing our own relocation driver. */
+
+/* The reloc processing routine for the ARM/Thumb COFF linker. NOTE:
+ This code is a very slightly modified copy of
+ _bfd_coff_generic_relocate_section. It would be a much more
+ maintainable solution to have a MACRO that could be expanded within
+ _bfd_coff_generic_relocate_section that would only be provided for
+ ARM/Thumb builds. It is only the code marked THUMBEXTENSION that
+ is different from the original. */
+
+static bfd_boolean
+coff_arm_relocate_section (bfd *output_bfd,
+ struct bfd_link_info *info,
+ bfd *input_bfd,
+ asection *input_section,
+ bfd_byte *contents,
+ struct internal_reloc *relocs,
+ struct internal_syment *syms,
+ asection **sections)
+{
+ struct internal_reloc * rel;
+ struct internal_reloc * relend;
+#ifndef ARM_WINCE
+ bfd_vma high_address = bfd_get_section_limit (input_bfd, input_section);
+#endif
+
+ rel = relocs;
+ relend = rel + input_section->reloc_count;
+
+ for (; rel < relend; rel++)
+ {
+ int done = 0;
+ long symndx;
+ struct coff_link_hash_entry * h;
+ struct internal_syment * sym;
+ bfd_vma addend;
+ bfd_vma val;
+ reloc_howto_type * howto;
+ bfd_reloc_status_type rstat;
+ bfd_vma h_val;
+
+ symndx = rel->r_symndx;
+
+ if (symndx == -1)
+ {
+ h = NULL;
+ sym = NULL;
+ }
+ else
+ {
+ h = obj_coff_sym_hashes (input_bfd)[symndx];
+ sym = syms + symndx;
+ }
+
+ /* COFF treats common symbols in one of two ways. Either the
+ size of the symbol is included in the section contents, or it
+ is not. We assume that the size is not included, and force
+ the rtype_to_howto function to adjust the addend as needed. */
+
+ if (sym != NULL && sym->n_scnum != 0)
+ addend = - sym->n_value;
+ else
+ addend = 0;
+
+ howto = coff_rtype_to_howto (input_bfd, input_section, rel, h,
+ sym, &addend);
+ if (howto == NULL)
+ return FALSE;
+
+ /* The relocation_section function will skip pcrel_offset relocs
+ when doing a relocatable link. However, we want to convert
+ ARM_26 to ARM_26D relocs if possible. We return a fake howto in
+ this case without pcrel_offset set, and adjust the addend to
+ compensate. 'partial_inplace' is also set, since we want 'done'
+ relocations to be reflected in section's data. */
+ if (rel->r_type == ARM_26
+ && h != NULL
+ && info->relocatable
+ && (h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak)
+ && (h->root.u.def.section->output_section
+ == input_section->output_section))
+ {
+ static reloc_howto_type fake_arm26_reloc =
+ HOWTO (ARM_26,
+ 2,
+ 2,
+ 24,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ aoutarm_fix_pcrel_26 ,
+ "ARM_26",
+ TRUE,
+ 0x00ffffff,
+ 0x00ffffff,
+ FALSE);
+
+ addend -= rel->r_vaddr - input_section->vma;
+#ifdef ARM_WINCE
+ /* FIXME: I don't know why, but the hack is necessary for correct
+ generation of bl's instruction offset. */
+ addend -= 8;
+#endif
+ howto = &fake_arm26_reloc;
+ }
+
+#ifdef ARM_WINCE
+ /* MS ARM-CE makes the reloc relative to the opcode's pc, not
+ the next opcode's pc, so is off by one. */
+#endif
+
+ /* If we are doing a relocatable link, then we can just ignore
+ a PC relative reloc that is pcrel_offset. It will already
+ have the correct value. If this is not a relocatable link,
+ then we should ignore the symbol value. */
+ if (howto->pc_relative && howto->pcrel_offset)
+ {
+ if (info->relocatable)
+ continue;
+ /* FIXME - it is not clear which targets need this next test
+ and which do not. It is known that it is needed for the
+ VxWorks and EPOC-PE targets, but it is also known that it
+ was suppressed for other ARM targets. This ought to be
+ sorted out one day. */
+#ifdef ARM_COFF_BUGFIX
+ /* We must not ignore the symbol value. If the symbol is
+ within the same section, the relocation should have already
+ been fixed, but if it is not, we'll be handed a reloc into
+ the beginning of the symbol's section, so we must not cancel
+ out the symbol's value, otherwise we'll be adding it in
+ twice. */
+ if (sym != NULL && sym->n_scnum != 0)
+ addend += sym->n_value;
+#endif
+ }
+
+ val = 0;
+
+ if (h == NULL)
+ {
+ asection *sec;
+
+ if (symndx == -1)
+ {
+ sec = bfd_abs_section_ptr;
+ val = 0;
+ }
+ else
+ {
+ sec = sections[symndx];
+ val = (sec->output_section->vma
+ + sec->output_offset
+ + sym->n_value
+ - sec->vma);
+ }
+ }
+ else
+ {
+ /* We don't output the stubs if we are generating a
+ relocatable output file, since we may as well leave the
+ stub generation to the final linker pass. If we fail to
+ verify that the name is defined, we'll try to build stubs
+ for an undefined name... */
+ if (! info->relocatable
+ && ( h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak))
+ {
+ asection * h_sec = h->root.u.def.section;
+ const char * name = h->root.root.string;
+
+ /* h locates the symbol referenced in the reloc. */
+ h_val = (h->root.u.def.value
+ + h_sec->output_section->vma
+ + h_sec->output_offset);
+
+ if (howto->type == ARM_26)
+ {
+ if ( h->class == C_THUMBSTATFUNC
+ || h->class == C_THUMBEXTFUNC)
+ {
+ /* Arm code calling a Thumb function. */
+ unsigned long int tmp;
+ bfd_vma my_offset;
+ asection * s;
+ long int ret_offset;
+ struct coff_link_hash_entry * myh;
+ struct coff_arm_link_hash_table * globals;
+
+ myh = find_arm_glue (info, name, input_bfd);
+ if (myh == NULL)
+ return FALSE;
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+
+ my_offset = myh->root.u.def.value;
+
+ s = bfd_get_section_by_name (globals->bfd_of_glue_owner,
+ ARM2THUMB_GLUE_SECTION_NAME);
+ BFD_ASSERT (s != NULL);
+ BFD_ASSERT (s->contents != NULL);
+ BFD_ASSERT (s->output_section != NULL);
+
+ if ((my_offset & 0x01) == 0x01)
+ {
+ if (h_sec->owner != NULL
+ && INTERWORK_SET (h_sec->owner)
+ && ! INTERWORK_FLAG (h_sec->owner))
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("%B(%s): warning: interworking not enabled.\n"
+ " first occurrence: %B: arm call to thumb"),
+ h_sec->owner, input_bfd, name);
+
+ --my_offset;
+ myh->root.u.def.value = my_offset;
+
+ bfd_put_32 (output_bfd, (bfd_vma) a2t1_ldr_insn,
+ s->contents + my_offset);
+
+ bfd_put_32 (output_bfd, (bfd_vma) a2t2_bx_r12_insn,
+ s->contents + my_offset + 4);
+
+ /* It's a thumb address. Add the low order bit. */
+ bfd_put_32 (output_bfd, h_val | a2t3_func_addr_insn,
+ s->contents + my_offset + 8);
+
+ if (info->base_file)
+ arm_emit_base_file_entry (info, output_bfd, s,
+ my_offset + 8);
+
+ }
+
+ BFD_ASSERT (my_offset <= globals->arm_glue_size);
+
+ tmp = bfd_get_32 (input_bfd, contents + rel->r_vaddr
+ - input_section->vma);
+
+ tmp = tmp & 0xFF000000;
+
+ /* Somehow these are both 4 too far, so subtract 8. */
+ ret_offset =
+ s->output_offset
+ + my_offset
+ + s->output_section->vma
+ - (input_section->output_offset
+ + input_section->output_section->vma
+ + rel->r_vaddr)
+ - 8;
+
+ tmp = tmp | ((ret_offset >> 2) & 0x00FFFFFF);
+
+ bfd_put_32 (output_bfd, (bfd_vma) tmp,
+ contents + rel->r_vaddr - input_section->vma);
+ done = 1;
+ }
+ }
+
+#ifndef ARM_WINCE
+ /* Note: We used to check for ARM_THUMB9 and ARM_THUMB12. */
+ else if (howto->type == ARM_THUMB23)
+ {
+ if ( h->class == C_EXT
+ || h->class == C_STAT
+ || h->class == C_LABEL)
+ {
+ /* Thumb code calling an ARM function. */
+ asection * s = 0;
+ bfd_vma my_offset;
+ unsigned long int tmp;
+ long int ret_offset;
+ struct coff_link_hash_entry * myh;
+ struct coff_arm_link_hash_table * globals;
+
+ myh = find_thumb_glue (info, name, input_bfd);
+ if (myh == NULL)
+ return FALSE;
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+
+ my_offset = myh->root.u.def.value;
+
+ s = bfd_get_section_by_name (globals->bfd_of_glue_owner,
+ THUMB2ARM_GLUE_SECTION_NAME);
+
+ BFD_ASSERT (s != NULL);
+ BFD_ASSERT (s->contents != NULL);
+ BFD_ASSERT (s->output_section != NULL);
+
+ if ((my_offset & 0x01) == 0x01)
+ {
+ if (h_sec->owner != NULL
+ && INTERWORK_SET (h_sec->owner)
+ && ! INTERWORK_FLAG (h_sec->owner)
+ && ! globals->support_old_code)
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("%B(%s): warning: interworking not enabled.\n"
+ " first occurrence: %B: thumb call to arm\n"
+ " consider relinking with --support-old-code enabled"),
+ h_sec->owner, input_bfd, name);
+
+ -- my_offset;
+ myh->root.u.def.value = my_offset;
+
+ if (globals->support_old_code)
+ {
+ bfd_put_16 (output_bfd, (bfd_vma) t2a1_push_insn,
+ s->contents + my_offset);
+
+ bfd_put_16 (output_bfd, (bfd_vma) t2a2_ldr_insn,
+ s->contents + my_offset + 2);
+
+ bfd_put_16 (output_bfd, (bfd_vma) t2a3_mov_insn,
+ s->contents + my_offset + 4);
+
+ bfd_put_16 (output_bfd, (bfd_vma) t2a4_bx_insn,
+ s->contents + my_offset + 6);
+
+ bfd_put_32 (output_bfd, (bfd_vma) t2a5_pop_insn,
+ s->contents + my_offset + 8);
+
+ bfd_put_32 (output_bfd, (bfd_vma) t2a6_bx_insn,
+ s->contents + my_offset + 12);
+
+ /* Store the address of the function in the last word of the stub. */
+ bfd_put_32 (output_bfd, h_val,
+ s->contents + my_offset + 16);
+
+ if (info->base_file)
+ arm_emit_base_file_entry (info, output_bfd, s,
+ my_offset + 16);
+ }
+ else
+ {
+ bfd_put_16 (output_bfd, (bfd_vma) t2a1_bx_pc_insn,
+ s->contents + my_offset);
+
+ bfd_put_16 (output_bfd, (bfd_vma) t2a2_noop_insn,
+ s->contents + my_offset + 2);
+
+ ret_offset =
+ /* Address of destination of the stub. */
+ ((bfd_signed_vma) h_val)
+ - ((bfd_signed_vma)
+ /* Offset from the start of the current section to the start of the stubs. */
+ (s->output_offset
+ /* Offset of the start of this stub from the start of the stubs. */
+ + my_offset
+ /* Address of the start of the current section. */
+ + s->output_section->vma)
+ /* The branch instruction is 4 bytes into the stub. */
+ + 4
+ /* ARM branches work from the pc of the instruction + 8. */
+ + 8);
+
+ bfd_put_32 (output_bfd,
+ (bfd_vma) t2a3_b_insn | ((ret_offset >> 2) & 0x00FFFFFF),
+ s->contents + my_offset + 4);
+
+ }
+ }
+
+ BFD_ASSERT (my_offset <= globals->thumb_glue_size);
+
+ /* Now go back and fix up the original BL insn to point
+ to here. */
+ ret_offset =
+ s->output_offset
+ + my_offset
+ - (input_section->output_offset
+ + rel->r_vaddr)
+ -4;
+
+ tmp = bfd_get_32 (input_bfd, contents + rel->r_vaddr
+ - input_section->vma);
+
+ bfd_put_32 (output_bfd,
+ (bfd_vma) insert_thumb_branch (tmp,
+ ret_offset),
+ contents + rel->r_vaddr - input_section->vma);
+
+ done = 1;
+ }
+ }
+#endif
+ }
+
+ /* If the relocation type and destination symbol does not
+ fall into one of the above categories, then we can just
+ perform a direct link. */
+
+ if (done)
+ rstat = bfd_reloc_ok;
+ else
+ if ( h->root.type == bfd_link_hash_defined
+ || h->root.type == bfd_link_hash_defweak)
+ {
+ asection *sec;
+
+ sec = h->root.u.def.section;
+ val = (h->root.u.def.value
+ + sec->output_section->vma
+ + sec->output_offset);
+ }
+
+ else if (! info->relocatable)
+ {
+ if (! ((*info->callbacks->undefined_symbol)
+ (info, h->root.root.string, input_bfd, input_section,
+ rel->r_vaddr - input_section->vma, TRUE)))
+ return FALSE;
+ }
+ }
+
+ if (info->base_file)
+ {
+ /* Emit a reloc if the backend thinks it needs it. */
+ if (sym && pe_data(output_bfd)->in_reloc_p(output_bfd, howto))
+ arm_emit_base_file_entry (info, output_bfd, input_section,
+ rel->r_vaddr);
+ }
+
+ if (done)
+ rstat = bfd_reloc_ok;
+#ifndef ARM_WINCE
+ /* Only perform this fix during the final link, not a relocatable link. */
+ else if (! info->relocatable
+ && howto->type == ARM_THUMB23)
+ {
+ /* This is pretty much a copy of what the default
+ _bfd_final_link_relocate and _bfd_relocate_contents
+ routines do to perform a relocation, with special
+ processing for the split addressing of the Thumb BL
+ instruction. Again, it would probably be simpler adding a
+ ThumbBRANCH23 specific macro expansion into the default
+ code. */
+
+ bfd_vma address = rel->r_vaddr - input_section->vma;
+
+ if (address > high_address)
+ rstat = bfd_reloc_outofrange;
+ else
+ {
+ bfd_vma relocation = val + addend;
+ int size = bfd_get_reloc_size (howto);
+ bfd_boolean overflow = FALSE;
+ bfd_byte *location = contents + address;
+ bfd_vma x = bfd_get_32 (input_bfd, location);
+ bfd_vma src_mask = 0x007FFFFE;
+ bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
+ bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
+ bfd_vma check;
+ bfd_signed_vma signed_check;
+ bfd_vma add;
+ bfd_signed_vma signed_add;
+
+ BFD_ASSERT (size == 4);
+
+ /* howto->pc_relative should be TRUE for type 14 BRANCH23. */
+ relocation -= (input_section->output_section->vma
+ + input_section->output_offset);
+
+ /* howto->pcrel_offset should be TRUE for type 14 BRANCH23. */
+ relocation -= address;
+
+ /* No need to negate the relocation with BRANCH23. */
+ /* howto->complain_on_overflow == complain_overflow_signed for BRANCH23. */
+ /* howto->rightshift == 1 */
+
+ /* Drop unwanted bits from the value we are relocating to. */
+ check = relocation >> howto->rightshift;
+
+ /* If this is a signed value, the rightshift just dropped
+ leading 1 bits (assuming twos complement). */
+ if ((bfd_signed_vma) relocation >= 0)
+ signed_check = check;
+ else
+ signed_check = (check
+ | ((bfd_vma) - 1
+ & ~((bfd_vma) - 1 >> howto->rightshift)));
+
+ /* Get the value from the object file. */
+ if (bfd_big_endian (input_bfd))
+ add = (((x) & 0x07ff0000) >> 4) | (((x) & 0x7ff) << 1);
+ else
+ add = ((((x) & 0x7ff) << 12) | (((x) & 0x07ff0000) >> 15));
+
+ /* Get the value from the object file with an appropriate sign.
+ The expression involving howto->src_mask isolates the upper
+ bit of src_mask. If that bit is set in the value we are
+ adding, it is negative, and we subtract out that number times
+ two. If src_mask includes the highest possible bit, then we
+ can not get the upper bit, but that does not matter since
+ signed_add needs no adjustment to become negative in that
+ case. */
+ signed_add = add;
+
+ if ((add & (((~ src_mask) >> 1) & src_mask)) != 0)
+ signed_add -= (((~ src_mask) >> 1) & src_mask) << 1;
+
+ /* howto->bitpos == 0 */
+ /* Add the value from the object file, shifted so that it is a
+ straight number. */
+ signed_check += signed_add;
+ relocation += signed_add;
+
+ BFD_ASSERT (howto->complain_on_overflow == complain_overflow_signed);
+
+ /* Assumes two's complement. */
+ if ( signed_check > reloc_signed_max
+ || signed_check < reloc_signed_min)
+ overflow = TRUE;
+
+ /* Put the relocation into the correct bits.
+ For a BLX instruction, make sure that the relocation is rounded up
+ to a word boundary. This follows the semantics of the instruction
+ which specifies that bit 1 of the target address will come from bit
+ 1 of the base address. */
+ if (bfd_big_endian (input_bfd))
+ {
+ if ((x & 0x1800) == 0x0800 && (relocation & 0x02))
+ relocation += 2;
+ relocation = (((relocation & 0xffe) >> 1) | ((relocation << 4) & 0x07ff0000));
+ }
+ else
+ {
+ if ((x & 0x18000000) == 0x08000000 && (relocation & 0x02))
+ relocation += 2;
+ relocation = (((relocation & 0xffe) << 15) | ((relocation >> 12) & 0x7ff));
+ }
+
+ /* Add the relocation to the correct bits of X. */
+ x = ((x & ~howto->dst_mask) | relocation);
+
+ /* Put the relocated value back in the object file. */
+ bfd_put_32 (input_bfd, x, location);
+
+ rstat = overflow ? bfd_reloc_overflow : bfd_reloc_ok;
+ }
+ }
+#endif
+ else
+ if (info->relocatable && ! howto->partial_inplace)
+ rstat = bfd_reloc_ok;
+ else
+ rstat = _bfd_final_link_relocate (howto, input_bfd, input_section,
+ contents,
+ rel->r_vaddr - input_section->vma,
+ val, addend);
+ /* Only perform this fix during the final link, not a relocatable link. */
+ if (! info->relocatable
+ && (rel->r_type == ARM_32 || rel->r_type == ARM_RVA32))
+ {
+ /* Determine if we need to set the bottom bit of a relocated address
+ because the address is the address of a Thumb code symbol. */
+ int patchit = FALSE;
+
+ if (h != NULL
+ && ( h->class == C_THUMBSTATFUNC
+ || h->class == C_THUMBEXTFUNC))
+ {
+ patchit = TRUE;
+ }
+ else if (sym != NULL
+ && sym->n_scnum > N_UNDEF)
+ {
+ /* No hash entry - use the symbol instead. */
+ if ( sym->n_sclass == C_THUMBSTATFUNC
+ || sym->n_sclass == C_THUMBEXTFUNC)
+ patchit = TRUE;
+ }
+
+ if (patchit)
+ {
+ bfd_byte * location = contents + rel->r_vaddr - input_section->vma;
+ bfd_vma x = bfd_get_32 (input_bfd, location);
+
+ bfd_put_32 (input_bfd, x | 1, location);
+ }
+ }
+
+ switch (rstat)
+ {
+ default:
+ abort ();
+ case bfd_reloc_ok:
+ break;
+ case bfd_reloc_outofrange:
+ (*_bfd_error_handler)
+ (_("%B: bad reloc address 0x%lx in section `%A'"),
+ input_bfd, input_section, (unsigned long) rel->r_vaddr);
+ return FALSE;
+ case bfd_reloc_overflow:
+ {
+ const char *name;
+ char buf[SYMNMLEN + 1];
+
+ if (symndx == -1)
+ name = "*ABS*";
+ else if (h != NULL)
+ name = NULL;
+ else
+ {
+ name = _bfd_coff_internal_syment_name (input_bfd, sym, buf);
+ if (name == NULL)
+ return FALSE;
+ }
+
+ if (! ((*info->callbacks->reloc_overflow)
+ (info, (h ? &h->root : NULL), name, howto->name,
+ (bfd_vma) 0, input_bfd, input_section,
+ rel->r_vaddr - input_section->vma)))
+ return FALSE;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+#ifndef COFF_IMAGE_WITH_PE
+
+bfd_boolean
+bfd_arm_allocate_interworking_sections (struct bfd_link_info * info)
+{
+ asection * s;
+ bfd_byte * foo;
+ struct coff_arm_link_hash_table * globals;
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+
+ if (globals->arm_glue_size != 0)
+ {
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+
+ s = bfd_get_section_by_name
+ (globals->bfd_of_glue_owner, ARM2THUMB_GLUE_SECTION_NAME);
+
+ BFD_ASSERT (s != NULL);
+ foo = bfd_alloc (globals->bfd_of_glue_owner, globals->arm_glue_size);
-/* We use the special COFF backend linker. */
-#define coff_relocate_section _bfd_coff_generic_relocate_section
+ s->size = globals->arm_glue_size;
+ s->contents = foo;
+ }
+
+ if (globals->thumb_glue_size != 0)
+ {
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+
+ s = bfd_get_section_by_name
+ (globals->bfd_of_glue_owner, THUMB2ARM_GLUE_SECTION_NAME);
+
+ BFD_ASSERT (s != NULL);
+
+ foo = bfd_alloc (globals->bfd_of_glue_owner, globals->thumb_glue_size);
+
+ s->size = globals->thumb_glue_size;
+ s->contents = foo;
+ }
+
+ return TRUE;
+}
+
+static void
+record_arm_to_thumb_glue (struct bfd_link_info * info,
+ struct coff_link_hash_entry * h)
+{
+ const char * name = h->root.root.string;
+ register asection * s;
+ char * tmp_name;
+ struct coff_link_hash_entry * myh;
+ struct bfd_link_hash_entry * bh;
+ struct coff_arm_link_hash_table * globals;
+ bfd_vma val;
+ bfd_size_type amt;
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
-/* When doing a relocateable link, we want to convert ARM26 relocs
- into ARM26D relocs. */
+ s = bfd_get_section_by_name
+ (globals->bfd_of_glue_owner, ARM2THUMB_GLUE_SECTION_NAME);
-static boolean
-coff_arm_adjust_symndx (obfd, info, ibfd, sec, irel, adjustedp)
- bfd *obfd;
- struct bfd_link_info *info;
- bfd *ibfd;
- asection *sec;
- struct internal_reloc *irel;
- boolean *adjustedp;
+ BFD_ASSERT (s != NULL);
+
+ amt = strlen (name) + strlen (ARM2THUMB_GLUE_ENTRY_NAME) + 1;
+ tmp_name = bfd_malloc (amt);
+
+ BFD_ASSERT (tmp_name);
+
+ sprintf (tmp_name, ARM2THUMB_GLUE_ENTRY_NAME, name);
+
+ myh = coff_link_hash_lookup
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
+ if (myh != NULL)
+ {
+ free (tmp_name);
+ /* We've already seen this guy. */
+ return;
+ }
+
+ /* The only trick here is using globals->arm_glue_size as the value. Even
+ though the section isn't allocated yet, this is where we will be putting
+ it. */
+ bh = NULL;
+ val = globals->arm_glue_size + 1;
+ bfd_coff_link_add_one_symbol (info, globals->bfd_of_glue_owner, tmp_name,
+ BSF_GLOBAL, s, val, NULL, TRUE, FALSE, &bh);
+
+ free (tmp_name);
+
+ globals->arm_glue_size += ARM2THUMB_GLUE_SIZE;
+
+ return;
+}
+
+#ifndef ARM_WINCE
+static void
+record_thumb_to_arm_glue (struct bfd_link_info * info,
+ struct coff_link_hash_entry * h)
{
- if (irel->r_type == 3)
+ const char * name = h->root.root.string;
+ asection * s;
+ char * tmp_name;
+ struct coff_link_hash_entry * myh;
+ struct bfd_link_hash_entry * bh;
+ struct coff_arm_link_hash_table * globals;
+ bfd_vma val;
+ bfd_size_type amt;
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+
+ s = bfd_get_section_by_name
+ (globals->bfd_of_glue_owner, THUMB2ARM_GLUE_SECTION_NAME);
+
+ BFD_ASSERT (s != NULL);
+
+ amt = strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1;
+ tmp_name = bfd_malloc (amt);
+
+ BFD_ASSERT (tmp_name);
+
+ sprintf (tmp_name, THUMB2ARM_GLUE_ENTRY_NAME, name);
+
+ myh = coff_link_hash_lookup
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
+ if (myh != NULL)
+ {
+ free (tmp_name);
+ /* We've already seen this guy. */
+ return;
+ }
+
+ bh = NULL;
+ val = globals->thumb_glue_size + 1;
+ bfd_coff_link_add_one_symbol (info, globals->bfd_of_glue_owner, tmp_name,
+ BSF_GLOBAL, s, val, NULL, TRUE, FALSE, &bh);
+
+ /* If we mark it 'thumb', the disassembler will do a better job. */
+ myh = (struct coff_link_hash_entry *) bh;
+ myh->class = C_THUMBEXTFUNC;
+
+ free (tmp_name);
+
+ /* Allocate another symbol to mark where we switch to arm mode. */
+
+#define CHANGE_TO_ARM "__%s_change_to_arm"
+#define BACK_FROM_ARM "__%s_back_from_arm"
+
+ amt = strlen (name) + strlen (CHANGE_TO_ARM) + 1;
+ tmp_name = bfd_malloc (amt);
+
+ BFD_ASSERT (tmp_name);
+
+ sprintf (tmp_name, globals->support_old_code ? BACK_FROM_ARM : CHANGE_TO_ARM, name);
+
+ bh = NULL;
+ val = globals->thumb_glue_size + (globals->support_old_code ? 8 : 4);
+ bfd_coff_link_add_one_symbol (info, globals->bfd_of_glue_owner, tmp_name,
+ BSF_LOCAL, s, val, NULL, TRUE, FALSE, &bh);
+
+ free (tmp_name);
+
+ globals->thumb_glue_size += THUMB2ARM_GLUE_SIZE;
+
+ return;
+}
+#endif /* not ARM_WINCE */
+
+/* Select a BFD to be used to hold the sections used by the glue code.
+ This function is called from the linker scripts in ld/emultempl/
+ {armcoff/pe}.em */
+
+bfd_boolean
+bfd_arm_get_bfd_for_interworking (bfd * abfd,
+ struct bfd_link_info * info)
+{
+ struct coff_arm_link_hash_table * globals;
+ flagword flags;
+ asection * sec;
+
+ /* If we are only performing a partial link do not bother
+ getting a bfd to hold the glue. */
+ if (info->relocatable)
+ return TRUE;
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+
+ if (globals->bfd_of_glue_owner != NULL)
+ return TRUE;
+
+ sec = bfd_get_section_by_name (abfd, ARM2THUMB_GLUE_SECTION_NAME);
+
+ if (sec == NULL)
+ {
+ flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_CODE | SEC_READONLY;
+
+ sec = bfd_make_section (abfd, ARM2THUMB_GLUE_SECTION_NAME);
+
+ if (sec == NULL
+ || ! bfd_set_section_flags (abfd, sec, flags)
+ || ! bfd_set_section_alignment (abfd, sec, 2))
+ return FALSE;
+ }
+
+ sec = bfd_get_section_by_name (abfd, THUMB2ARM_GLUE_SECTION_NAME);
+
+ if (sec == NULL)
+ {
+ flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_CODE | SEC_READONLY;
+
+ sec = bfd_make_section (abfd, THUMB2ARM_GLUE_SECTION_NAME);
+
+ if (sec == NULL
+ || ! bfd_set_section_flags (abfd, sec, flags)
+ || ! bfd_set_section_alignment (abfd, sec, 2))
+ return FALSE;
+ }
+
+ /* Save the bfd for later use. */
+ globals->bfd_of_glue_owner = abfd;
+
+ return TRUE;
+}
+
+bfd_boolean
+bfd_arm_process_before_allocation (bfd * abfd,
+ struct bfd_link_info * info,
+ int support_old_code)
+{
+ asection * sec;
+ struct coff_arm_link_hash_table * globals;
+
+ /* If we are only performing a partial link do not bother
+ to construct any glue. */
+ if (info->relocatable)
+ return TRUE;
+
+ /* Here we have a bfd that is to be included on the link. We have a hook
+ to do reloc rummaging, before section sizes are nailed down. */
+ _bfd_coff_get_external_symbols (abfd);
+
+ globals = coff_arm_hash_table (info);
+
+ BFD_ASSERT (globals != NULL);
+ BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+
+ globals->support_old_code = support_old_code;
+
+ /* Rummage around all the relocs and map the glue vectors. */
+ sec = abfd->sections;
+
+ if (sec == NULL)
+ return TRUE;
+
+ for (; sec != NULL; sec = sec->next)
+ {
+ struct internal_reloc * i;
+ struct internal_reloc * rel;
+
+ if (sec->reloc_count == 0)
+ continue;
+
+ /* Load the relocs. */
+ /* FIXME: there may be a storage leak here. */
+ i = _bfd_coff_read_internal_relocs (abfd, sec, 1, 0, 0, 0);
+
+ BFD_ASSERT (i != 0);
+
+ for (rel = i; rel < i + sec->reloc_count; ++rel)
+ {
+ unsigned short r_type = rel->r_type;
+ long symndx;
+ struct coff_link_hash_entry * h;
+
+ symndx = rel->r_symndx;
+
+ /* If the relocation is not against a symbol it cannot concern us. */
+ if (symndx == -1)
+ continue;
+
+ /* If the index is outside of the range of our table, something has gone wrong. */
+ if (symndx >= obj_conv_table_size (abfd))
+ {
+ _bfd_error_handler (_("%B: illegal symbol index in reloc: %d"),
+ abfd, symndx);
+ continue;
+ }
+
+ h = obj_coff_sym_hashes (abfd)[symndx];
+
+ /* If the relocation is against a static symbol it must be within
+ the current section and so cannot be a cross ARM/Thumb relocation. */
+ if (h == NULL)
+ continue;
+
+ switch (r_type)
+ {
+ case ARM_26:
+ /* This one is a call from arm code. We need to look up
+ the target of the call. If it is a thumb target, we
+ insert glue. */
+
+ if (h->class == C_THUMBEXTFUNC)
+ record_arm_to_thumb_glue (info, h);
+ break;
+
+#ifndef ARM_WINCE
+ case ARM_THUMB23:
+ /* This one is a call from thumb code. We used to look
+ for ARM_THUMB9 and ARM_THUMB12 as well. We need to look
+ up the target of the call. If it is an arm target, we
+ insert glue. If the symbol does not exist it will be
+ given a class of C_EXT and so we will generate a stub
+ for it. This is not really a problem, since the link
+ is doomed anyway. */
+
+ switch (h->class)
+ {
+ case C_EXT:
+ case C_STAT:
+ case C_LABEL:
+ record_thumb_to_arm_glue (info, h);
+ break;
+ default:
+ ;
+ }
+ break;
+#endif
+
+ default:
+ break;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+#endif /* ! defined (COFF_IMAGE_WITH_PE) */
+
+#define coff_bfd_reloc_type_lookup coff_arm_reloc_type_lookup
+#define coff_relocate_section coff_arm_relocate_section
+#define coff_bfd_is_local_label_name coff_arm_is_local_label_name
+#define coff_adjust_symndx coff_arm_adjust_symndx
+#define coff_link_output_has_begun coff_arm_link_output_has_begun
+#define coff_final_link_postscript coff_arm_final_link_postscript
+#define coff_bfd_merge_private_bfd_data coff_arm_merge_private_bfd_data
+#define coff_bfd_print_private_bfd_data coff_arm_print_private_bfd_data
+#define coff_bfd_set_private_flags _bfd_coff_arm_set_private_flags
+#define coff_bfd_copy_private_bfd_data coff_arm_copy_private_bfd_data
+#define coff_bfd_link_hash_table_create coff_arm_link_hash_table_create
+
+/* When doing a relocatable link, we want to convert ARM_26 relocs
+ into ARM_26D relocs. */
+
+static bfd_boolean
+coff_arm_adjust_symndx (bfd *obfd ATTRIBUTE_UNUSED,
+ struct bfd_link_info *info ATTRIBUTE_UNUSED,
+ bfd *ibfd,
+ asection *sec,
+ struct internal_reloc *irel,
+ bfd_boolean *adjustedp)
+{
+ if (irel->r_type == ARM_26)
{
struct coff_link_hash_entry *h;
&& (h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak)
&& h->root.u.def.section->output_section == sec->output_section)
- irel->r_type = 7;
+ irel->r_type = ARM_26D;
}
- *adjustedp = false;
- return true;
+ *adjustedp = FALSE;
+ return TRUE;
}
-
-#define APCS_FLAG( abfd ) (coff_data (abfd)->flags & F_APCS_26)
-#define APCS_SET( abfd ) (coff_data (abfd)->flags & F_APCS_SET)
-#define SET_APCS_FLAG( abfd, flg ) (coff_data (abfd)->flags = (coff_data (abfd)->flags & ~ F_APCS_26) | (flg | F_APCS_SET))
-
/* Called when merging the private data areas of two BFDs.
This is important as it allows us to detect if we are
attempting to merge binaries compiled for different ARM
- targets, eg different CPUs or differents APCS's. */
+ targets, eg different CPUs or different APCS's. */
-static boolean
-coff_arm_bfd_merge_private_bfd_data (ibfd, obfd)
- bfd * ibfd;
- bfd * obfd;
+static bfd_boolean
+coff_arm_merge_private_bfd_data (bfd * ibfd, bfd * obfd)
{
BFD_ASSERT (ibfd != NULL && obfd != NULL);
if (ibfd == obfd)
- return true;
+ return TRUE;
- /* If the two formats are different we cannot check anything */
- if (ibfd->xvec != obfd->xvec)
- return true;
+ /* If the two formats are different we cannot merge anything.
+ This is not an error, since it is permissable to change the
+ input and output formats. */
+ if ( ibfd->xvec->flavour != bfd_target_coff_flavour
+ || obfd->xvec->flavour != bfd_target_coff_flavour)
+ return TRUE;
- /* Verify that the APCS is the same for the two BFDs */
+ /* Determine what should happen if the input ARM architecture
+ does not match the output ARM architecture. */
+ if (! bfd_arm_merge_machines (ibfd, obfd))
+ return FALSE;
+
+ /* Verify that the APCS is the same for the two BFDs. */
if (APCS_SET (ibfd))
{
if (APCS_SET (obfd))
{
- /* If the src and dest have different APCS flag bits set, fail */
- if (APCS_FLAG (obfd) != APCS_FLAG (ibfd))
+ /* If the src and dest have different APCS flag bits set, fail. */
+ if (APCS_26_FLAG (obfd) != APCS_26_FLAG (ibfd))
{
_bfd_error_handler
- ("%s: ERROR: compiled for APCS-%d whereas target %s uses APCS-%d",
- bfd_get_filename (ibfd), APCS_FLAG (ibfd) ? 26 : 32,
- bfd_get_filename (obfd), APCS_FLAG (obfd) ? 26 : 32
+ /* xgettext: c-format */
+ (_("ERROR: %B is compiled for APCS-%d, whereas %B is compiled for APCS-%d"),
+ ibfd, obfd,
+ APCS_26_FLAG (ibfd) ? 26 : 32,
+ APCS_26_FLAG (obfd) ? 26 : 32
);
bfd_set_error (bfd_error_wrong_format);
- return false;
+ return FALSE;
+ }
+
+ if (APCS_FLOAT_FLAG (obfd) != APCS_FLOAT_FLAG (ibfd))
+ {
+ const char *msg;
+
+ if (APCS_FLOAT_FLAG (ibfd))
+ /* xgettext: c-format */
+ msg = _("ERROR: %B passes floats in float registers, whereas %B passes them in integer registers");
+ else
+ /* xgettext: c-format */
+ msg = _("ERROR: %B passes floats in integer registers, whereas %B passes them in float registers");
+
+ _bfd_error_handler (msg, ibfd, obfd);
+
+ bfd_set_error (bfd_error_wrong_format);
+ return FALSE;
+ }
+
+ if (PIC_FLAG (obfd) != PIC_FLAG (ibfd))
+ {
+ const char * msg;
+
+ if (PIC_FLAG (ibfd))
+ /* xgettext: c-format */
+ msg = _("ERROR: %B is compiled as position independent code, whereas target %B is absolute position");
+ else
+ /* xgettext: c-format */
+ msg = _("ERROR: %B is compiled as absolute position code, whereas target %B is position independent");
+ _bfd_error_handler (msg, ibfd, obfd);
+
+ bfd_set_error (bfd_error_wrong_format);
+ return FALSE;
}
}
else
{
- SET_APCS_FLAG (obfd, APCS_FLAG (ibfd));
-
- /* Set up the arch and fields as well as these are probably wrong */
+ SET_APCS_FLAGS (obfd, APCS_26_FLAG (ibfd) | APCS_FLOAT_FLAG (ibfd) | PIC_FLAG (ibfd));
+
+ /* Set up the arch and fields as well as these are probably wrong. */
bfd_set_arch_mach (obfd, bfd_get_arch (ibfd), bfd_get_mach (ibfd));
}
}
-
- return true;
-}
+ /* Check the interworking support. */
+ if (INTERWORK_SET (ibfd))
+ {
+ if (INTERWORK_SET (obfd))
+ {
+ /* If the src and dest differ in their interworking issue a warning. */
+ if (INTERWORK_FLAG (obfd) != INTERWORK_FLAG (ibfd))
+ {
+ const char * msg;
+
+ if (INTERWORK_FLAG (ibfd))
+ /* xgettext: c-format */
+ msg = _("Warning: %B supports interworking, whereas %B does not");
+ else
+ /* xgettext: c-format */
+ msg = _("Warning: %B does not support interworking, whereas %B does");
+
+ _bfd_error_handler (msg, ibfd, obfd);
+ }
+ }
+ else
+ {
+ SET_INTERWORK_FLAG (obfd, INTERWORK_FLAG (ibfd));
+ }
+ }
+
+ return TRUE;
+}
-/* Display the flags field */
+/* Display the flags field. */
-static boolean
-coff_arm_bfd_print_private_bfd_data (abfd, ptr)
- bfd * abfd;
- PTR ptr;
+static bfd_boolean
+coff_arm_print_private_bfd_data (bfd * abfd, void * ptr)
{
FILE * file = (FILE *) ptr;
-
- BFD_ASSERT (abfd != NULL && ptr != NULL)
-
- fprintf (file, "private flags = %x", coff_data( abfd )->flags);
-
+
+ BFD_ASSERT (abfd != NULL && ptr != NULL);
+
+ /* xgettext:c-format */
+ fprintf (file, _("private flags = %x:"), coff_data (abfd)->flags);
+
if (APCS_SET (abfd))
- fprintf (file, ": [APCS-%d]", APCS_FLAG( abfd ) ? 26 : 32);
-
+ {
+ /* xgettext: APCS is ARM Procedure Call Standard, it should not be translated. */
+ fprintf (file, " [APCS-%d]", APCS_26_FLAG (abfd) ? 26 : 32);
+
+ if (APCS_FLOAT_FLAG (abfd))
+ fprintf (file, _(" [floats passed in float registers]"));
+ else
+ fprintf (file, _(" [floats passed in integer registers]"));
+
+ if (PIC_FLAG (abfd))
+ fprintf (file, _(" [position independent]"));
+ else
+ fprintf (file, _(" [absolute position]"));
+ }
+
+ if (! INTERWORK_SET (abfd))
+ fprintf (file, _(" [interworking flag not initialised]"));
+ else if (INTERWORK_FLAG (abfd))
+ fprintf (file, _(" [interworking supported]"));
+ else
+ fprintf (file, _(" [interworking not supported]"));
+
fputc ('\n', file);
-
- return true;
-}
+ return TRUE;
+}
/* Copies the given flags into the coff_tdata.flags field.
Typically these flags come from the f_flags[] field of
the COFF filehdr structure, which contains important,
- target specific information. */
+ target specific information.
+ Note: Although this function is static, it is explicitly
+ called from both coffcode.h and peicode.h. */
-static boolean
-coff_arm_bfd_set_private_flags (abfd, flags)
- bfd * abfd;
- flagword flags;
+static bfd_boolean
+_bfd_coff_arm_set_private_flags (bfd * abfd, flagword flags)
{
- int flag;
+ flagword flag;
BFD_ASSERT (abfd != NULL);
flag = (flags & F_APCS26) ? F_APCS_26 : 0;
- /* Make sure that the APCS field has not been initialised to the opposite value */
- if (APCS_SET (abfd) && (APCS_FLAG (abfd) != flag))
- return false;
+ /* Make sure that the APCS field has not been initialised to the opposite
+ value. */
+ if (APCS_SET (abfd)
+ && ( (APCS_26_FLAG (abfd) != flag)
+ || (APCS_FLOAT_FLAG (abfd) != (flags & F_APCS_FLOAT))
+ || (PIC_FLAG (abfd) != (flags & F_PIC))
+ ))
+ return FALSE;
- SET_APCS_FLAG (abfd, flag);
-
- return true;
-}
+ flag |= (flags & (F_APCS_FLOAT | F_PIC));
+
+ SET_APCS_FLAGS (abfd, flag);
+
+ flag = (flags & F_INTERWORK);
+
+ /* If the BFD has already had its interworking flag set, but it
+ is different from the value that we have been asked to set,
+ then assume that that merged code will not support interworking
+ and set the flag accordingly. */
+ if (INTERWORK_SET (abfd) && (INTERWORK_FLAG (abfd) != flag))
+ {
+ if (flag)
+ /* xgettext: c-format */
+ _bfd_error_handler (_("Warning: Not setting interworking flag of %B since it has already been specified as non-interworking"),
+ abfd);
+ else
+ /* xgettext: c-format */
+ _bfd_error_handler (_("Warning: Clearing the interworking flag of %B due to outside request"),
+ abfd);
+ flag = 0;
+ }
+ SET_INTERWORK_FLAG (abfd, flag);
+
+ return TRUE;
+}
/* Copy the important parts of the target specific data
- from one instance of a BFD to another. */
+ from one instance of a BFD to another. */
-static boolean
-coff_arm_bfd_copy_private_bfd_data (src, dest)
- bfd * src;
- bfd * dest;
+static bfd_boolean
+coff_arm_copy_private_bfd_data (bfd * src, bfd * dest)
{
BFD_ASSERT (src != NULL && dest != NULL);
if (src == dest)
- return true;
+ return TRUE;
- /* If the destination is not in the same format as the source, do not do the copy */
+ /* If the destination is not in the same format as the source, do not do
+ the copy. */
if (src->xvec != dest->xvec)
- return true;
+ return TRUE;
- /* copy the flags field */
+ /* Copy the flags field. */
if (APCS_SET (src))
{
if (APCS_SET (dest))
{
- /* If the src and dest have different APCS flag bits set, fail */
- if (APCS_FLAG (dest) != APCS_FLAG (src))
- return false;
+ /* If the src and dest have different APCS flag bits set, fail. */
+ if (APCS_26_FLAG (dest) != APCS_26_FLAG (src))
+ return FALSE;
+
+ if (APCS_FLOAT_FLAG (dest) != APCS_FLOAT_FLAG (src))
+ return FALSE;
+
+ if (PIC_FLAG (dest) != PIC_FLAG (src))
+ return FALSE;
}
else
- SET_APCS_FLAG (dest, APCS_FLAG (src));
+ SET_APCS_FLAGS (dest, APCS_26_FLAG (src) | APCS_FLOAT_FLAG (src)
+ | PIC_FLAG (src));
}
- return true;
-}
+ if (INTERWORK_SET (src))
+ {
+ if (INTERWORK_SET (dest))
+ {
+ /* If the src and dest have different interworking flags then turn
+ off the interworking bit. */
+ if (INTERWORK_FLAG (dest) != INTERWORK_FLAG (src))
+ {
+ if (INTERWORK_FLAG (dest))
+ {
+ /* xgettext:c-format */
+ _bfd_error_handler (("\
+Warning: Clearing the interworking flag of %B because non-interworking code in %B has been linked with it"),
+ dest, src);
+ }
+
+ SET_INTERWORK_FLAG (dest, 0);
+ }
+ }
+ else
+ {
+ SET_INTERWORK_FLAG (dest, INTERWORK_FLAG (src));
+ }
+ }
+ return TRUE;
+}
-#define coff_adjust_symndx coff_arm_adjust_symndx
-#define coff_bfd_merge_private_bfd_data coff_arm_bfd_merge_private_bfd_data
-#define coff_bfd_print_private_bfd_data coff_arm_bfd_print_private_bfd_data
-#define coff_bfd_set_private_flags coff_arm_bfd_set_private_flags
-#define coff_bfd_copy_private_bfd_data coff_arm_bfd_copy_private_bfd_data
+/* Note: the definitions here of LOCAL_LABEL_PREFIX and USER_LABEL_PREIFX
+ *must* match the definitions in gcc/config/arm/{coff|semi|aout}.h. */
+#define LOCAL_LABEL_PREFIX ""
+#ifndef USER_LABEL_PREFIX
+#define USER_LABEL_PREFIX "_"
+#endif
-#include "coffcode.h"
+/* Like _bfd_coff_is_local_label_name, but
+ a) test against USER_LABEL_PREFIX, to avoid stripping labels known to be
+ non-local.
+ b) Allow other prefixes than ".", e.g. an empty prefix would cause all
+ labels of the form Lxxx to be stripped. */
-const bfd_target
-#ifdef TARGET_LITTLE_SYM
-TARGET_LITTLE_SYM =
-#else
-armcoff_little_vec =
-#endif
+static bfd_boolean
+coff_arm_is_local_label_name (bfd * abfd ATTRIBUTE_UNUSED,
+ const char * name)
{
-#ifdef TARGET_LITTLE_NAME
- TARGET_LITTLE_NAME,
-#else
- "coff-arm-little",
+#ifdef USER_LABEL_PREFIX
+ if (USER_LABEL_PREFIX[0] != 0)
+ {
+ size_t len = strlen (USER_LABEL_PREFIX);
+
+ if (strncmp (name, USER_LABEL_PREFIX, len) == 0)
+ return FALSE;
+ }
#endif
- bfd_target_coff_flavour,
- BFD_ENDIAN_LITTLE, /* data byte order is little */
- BFD_ENDIAN_LITTLE, /* header byte order is little */
- (HAS_RELOC | EXEC_P | /* object flags */
- HAS_LINENO | HAS_DEBUG |
- HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+#ifdef LOCAL_LABEL_PREFIX
+ /* If there is a prefix for local labels then look for this.
+ If the prefix exists, but it is empty, then ignore the test. */
-#ifndef COFF_WITH_PE
- (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-#else
- (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC /* section flags */
- | SEC_LINK_ONCE | SEC_LINK_DUPLICATES),
-#endif
+ if (LOCAL_LABEL_PREFIX[0] != 0)
+ {
+ size_t len = strlen (LOCAL_LABEL_PREFIX);
-#ifdef TARGET_UNDERSCORE
- TARGET_UNDERSCORE, /* leading underscore */
-#else
- 0, /* leading underscore */
-#endif
- '/', /* ar_pad_char */
- 15, /* ar_max_namelen */
-
- bfd_getl64, bfd_getl_signed_64, bfd_putl64,
- bfd_getl32, bfd_getl_signed_32, bfd_putl32,
- bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* data */
- bfd_getl64, bfd_getl_signed_64, bfd_putl64,
- bfd_getl32, bfd_getl_signed_32, bfd_putl32,
- bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
-
-/* Note that we allow an object file to be treated as a core file as well. */
- {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
- bfd_generic_archive_p, coff_object_p},
- {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
- bfd_false},
- {bfd_false, coff_write_object_contents, /* bfd_write_contents */
- _bfd_write_archive_contents, bfd_false},
-
- BFD_JUMP_TABLE_GENERIC (coff),
- BFD_JUMP_TABLE_COPY (coff),
- BFD_JUMP_TABLE_CORE (_bfd_nocore),
- BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
- BFD_JUMP_TABLE_SYMBOLS (coff),
- BFD_JUMP_TABLE_RELOCS (coff),
- BFD_JUMP_TABLE_WRITE (coff),
- BFD_JUMP_TABLE_LINK (coff),
- BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
- COFF_SWAP_TABLE,
-};
+ if (strncmp (name, LOCAL_LABEL_PREFIX, len) != 0)
+ return FALSE;
-const bfd_target
-#ifdef TARGET_BIG_SYM
-TARGET_BIG_SYM =
-#else
-armcoff_big_vec =
+ /* Perform the checks below for the rest of the name. */
+ name += len;
+ }
#endif
+
+ return name[0] == 'L';
+}
+
+/* This piece of machinery exists only to guarantee that the bfd that holds
+ the glue section is written last.
+
+ This does depend on bfd_make_section attaching a new section to the
+ end of the section list for the bfd. */
+
+static bfd_boolean
+coff_arm_link_output_has_begun (bfd * sub, struct coff_final_link_info * info)
{
-#ifdef TARGET_BIG_NAME
- TARGET_BIG_NAME,
-#else
- "coff-arm-big",
-#endif
- bfd_target_coff_flavour,
- BFD_ENDIAN_BIG, /* data byte order is big */
- BFD_ENDIAN_BIG, /* header byte order is big */
+ return (sub->output_has_begun
+ || sub == coff_arm_hash_table (info->info)->bfd_of_glue_owner);
+}
- (HAS_RELOC | EXEC_P | /* object flags */
- HAS_LINENO | HAS_DEBUG |
- HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
+static bfd_boolean
+coff_arm_final_link_postscript (bfd * abfd ATTRIBUTE_UNUSED,
+ struct coff_final_link_info * pfinfo)
+{
+ struct coff_arm_link_hash_table * globals;
-#ifndef COFF_WITH_PE
- (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
-#else
- (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC /* section flags */
- | SEC_LINK_ONCE | SEC_LINK_DUPLICATES),
+ globals = coff_arm_hash_table (pfinfo->info);
+
+ BFD_ASSERT (globals != NULL);
+
+ if (globals->bfd_of_glue_owner != NULL)
+ {
+ if (! _bfd_coff_link_input_bfd (pfinfo, globals->bfd_of_glue_owner))
+ return FALSE;
+
+ globals->bfd_of_glue_owner->output_has_begun = TRUE;
+ }
+
+ return bfd_arm_update_notes (abfd, ARM_NOTE_SECTION);
+}
+
+#include "coffcode.h"
+
+#ifndef TARGET_LITTLE_SYM
+#define TARGET_LITTLE_SYM armcoff_little_vec
+#endif
+#ifndef TARGET_LITTLE_NAME
+#define TARGET_LITTLE_NAME "coff-arm-little"
+#endif
+#ifndef TARGET_BIG_SYM
+#define TARGET_BIG_SYM armcoff_big_vec
+#endif
+#ifndef TARGET_BIG_NAME
+#define TARGET_BIG_NAME "coff-arm-big"
#endif
-#ifdef TARGET_UNDERSCORE
- TARGET_UNDERSCORE, /* leading underscore */
+#ifndef TARGET_UNDERSCORE
+#define TARGET_UNDERSCORE 0
+#endif
+
+#ifndef EXTRA_S_FLAGS
+#ifdef COFF_WITH_PE
+#define EXTRA_S_FLAGS (SEC_CODE | SEC_LINK_ONCE | SEC_LINK_DUPLICATES)
#else
- 0, /* leading underscore */
+#define EXTRA_S_FLAGS SEC_CODE
#endif
- '/', /* ar_pad_char */
- 15, /* ar_max_namelen */
-
- bfd_getb64, bfd_getb_signed_64, bfd_putb64,
- bfd_getb32, bfd_getb_signed_32, bfd_putb32,
- bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */
- bfd_getb64, bfd_getb_signed_64, bfd_putb64,
- bfd_getb32, bfd_getb_signed_32, bfd_putb32,
- bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
-
-/* Note that we allow an object file to be treated as a core file as well. */
- {_bfd_dummy_target, coff_object_p, /* bfd_check_format */
- bfd_generic_archive_p, coff_object_p},
- {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
- bfd_false},
- {bfd_false, coff_write_object_contents, /* bfd_write_contents */
- _bfd_write_archive_contents, bfd_false},
-
- BFD_JUMP_TABLE_GENERIC (coff),
- BFD_JUMP_TABLE_COPY (coff),
- BFD_JUMP_TABLE_CORE (_bfd_nocore),
- BFD_JUMP_TABLE_ARCHIVE (_bfd_archive_coff),
- BFD_JUMP_TABLE_SYMBOLS (coff),
- BFD_JUMP_TABLE_RELOCS (coff),
- BFD_JUMP_TABLE_WRITE (coff),
- BFD_JUMP_TABLE_LINK (coff),
- BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
-
- COFF_SWAP_TABLE,
-};
+#endif
+
+/* Forward declaration for use initialising alternative_target field. */
+extern const bfd_target TARGET_BIG_SYM ;
+
+/* Target vectors. */
+CREATE_LITTLE_COFF_TARGET_VEC (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, D_PAGED, EXTRA_S_FLAGS, TARGET_UNDERSCORE, & TARGET_BIG_SYM, COFF_SWAP_TABLE)
+CREATE_BIG_COFF_TARGET_VEC (TARGET_BIG_SYM, TARGET_BIG_NAME, D_PAGED, EXTRA_S_FLAGS, TARGET_UNDERSCORE, & TARGET_LITTLE_SYM, COFF_SWAP_TABLE)