/* BFD back-end for ARM COFF files.
- Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003
Free Software Foundation, Inc.
Written by Cygnus Support.
/* Macros for manipulation the bits in the flags field of the coff data
structure. */
-#define APCS_26_FLAG( abfd ) (coff_data (abfd)->flags & F_APCS_26)
-#define APCS_FLOAT_FLAG( abfd ) (coff_data (abfd)->flags & F_APCS_FLOAT)
-#define PIC_FLAG( abfd ) (coff_data (abfd)->flags & F_PIC)
-#define APCS_SET( abfd ) (coff_data (abfd)->flags & F_APCS_SET)
-#define SET_APCS_FLAGS( abfd, flgs) (coff_data (abfd)->flags = \
- (coff_data (abfd)->flags & ~ (F_APCS_26 | F_APCS_FLOAT | F_PIC)) \
- | (flgs | F_APCS_SET))
-#define INTERWORK_FLAG( abfd ) (coff_data (abfd)->flags & F_INTERWORK)
-#define INTERWORK_SET( abfd ) (coff_data (abfd)->flags & F_INTERWORK_SET)
-#define SET_INTERWORK_FLAG( abfd, flg ) (coff_data (abfd)->flags = \
- (coff_data (abfd)->flags & ~ F_INTERWORK) \
- | (flg | F_INTERWORK_SET))
+#define APCS_26_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_APCS_26)
+
+#define APCS_FLOAT_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_APCS_FLOAT)
+
+#define PIC_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_PIC)
+
+#define APCS_SET(abfd) \
+ (coff_data (abfd)->flags & F_APCS_SET)
+
+#define SET_APCS_FLAGS(abfd, flgs) \
+ do \
+ { \
+ coff_data (abfd)->flags &= ~(F_APCS_26 | F_APCS_FLOAT | F_PIC); \
+ coff_data (abfd)->flags |= (flgs) | F_APCS_SET; \
+ } \
+ while (0)
+
+#define INTERWORK_FLAG(abfd) \
+ (coff_data (abfd)->flags & F_INTERWORK)
+
+#define INTERWORK_SET(abfd) \
+ (coff_data (abfd)->flags & F_INTERWORK_SET)
+
+#define SET_INTERWORK_FLAG(abfd, flg) \
+ do \
+ { \
+ coff_data (abfd)->flags &= ~F_INTERWORK; \
+ coff_data (abfd)->flags |= (flg) | F_INTERWORK_SET; \
+ } \
+ while (0)
#ifndef NUM_ELEM
#define NUM_ELEM(a) ((sizeof (a)) / sizeof ((a)[0]))
#endif
-
+
typedef enum {bunknown, b9, b12, b23} thumb_pcrel_branchtype;
/* some typedefs for holding instructions */
typedef unsigned long int insn32;
typedef unsigned short int insn16;
-
/* Forward declarations for stupid compilers. */
-static boolean coff_arm_relocate_section
+static bfd_boolean coff_arm_relocate_section
PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
struct internal_reloc *, struct internal_syment *, asection **));
static bfd_reloc_status_type aoutarm_fix_pcrel_26_done
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
static bfd_reloc_status_type aoutarm_fix_pcrel_26
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+#ifndef ARM_WINCE
static bfd_reloc_status_type coff_thumb_pcrel_23
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
-static bfd_reloc_status_type coff_thumb_pcrel_12
- PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
static bfd_reloc_status_type coff_thumb_pcrel_9
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
+static insn32 insert_thumb_branch
+ PARAMS ((insn32, int));
+#endif
+static bfd_reloc_status_type coff_thumb_pcrel_12
+ PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
static bfd_reloc_status_type coff_arm_reloc
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **));
-static boolean coff_arm_adjust_symndx
+static bfd_boolean coff_arm_adjust_symndx
PARAMS ((bfd *, struct bfd_link_info *, bfd *,
- asection *, struct internal_reloc *, boolean *));
-static reloc_howto_type * coff_arm_rtype_to_howto
+ asection *, struct internal_reloc *, bfd_boolean *));
+static reloc_howto_type * coff_arm_rtype_to_howto
PARAMS ((bfd *, asection *, struct internal_reloc *,
- struct coff_link_hash_entry *, struct internal_syment *, bfd_vma *));
+ struct coff_link_hash_entry *, struct internal_syment *,
+ bfd_vma *));
static bfd_reloc_status_type coff_thumb_pcrel_common
PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **,
thumb_pcrel_branchtype));
-static CONST struct reloc_howto_struct * coff_arm_reloc_type_lookup
+static const struct reloc_howto_struct * coff_arm_reloc_type_lookup
PARAMS ((bfd *, bfd_reloc_code_real_type));
static struct bfd_link_hash_table * coff_arm_link_hash_table_create
PARAMS ((bfd *));
-static insn32 insert_thumb_branch
- PARAMS ((insn32, int));
static struct coff_link_hash_entry * find_thumb_glue
- PARAMS ((struct bfd_link_info *, CONST char *, bfd *));
+ PARAMS ((struct bfd_link_info *, const char *, bfd *));
static struct coff_link_hash_entry * find_arm_glue
- PARAMS ((struct bfd_link_info *, CONST char *, bfd *));
+ PARAMS ((struct bfd_link_info *, const char *, bfd *));
#ifndef COFF_IMAGE_WITH_PE
static void record_arm_to_thumb_glue
PARAMS ((struct bfd_link_info *, struct coff_link_hash_entry *));
+#ifndef ARM_WINCE
static void record_thumb_to_arm_glue
PARAMS ((struct bfd_link_info *, struct coff_link_hash_entry *));
#endif
-static boolean coff_arm_merge_private_bfd_data
+#endif
+static bfd_boolean coff_arm_merge_private_bfd_data
PARAMS ((bfd *, bfd *));
-static boolean coff_arm_print_private_bfd_data
+static bfd_boolean coff_arm_print_private_bfd_data
PARAMS ((bfd *, PTR));
-static boolean _bfd_coff_arm_set_private_flags
+static bfd_boolean _bfd_coff_arm_set_private_flags
PARAMS ((bfd *, flagword));
-static boolean coff_arm_copy_private_bfd_data
+static bfd_boolean coff_arm_copy_private_bfd_data
PARAMS ((bfd *, bfd *));
-static boolean coff_arm_is_local_label_name
+static bfd_boolean coff_arm_is_local_label_name
PARAMS ((bfd *, const char *));
-static boolean coff_arm_link_output_has_begun
+static bfd_boolean coff_arm_link_output_has_begun
PARAMS ((bfd *, struct coff_final_link_info *));
-static boolean coff_arm_final_link_postscript
+static bfd_boolean coff_arm_final_link_postscript
PARAMS ((bfd *, struct coff_final_link_info *));
+static void arm_emit_base_file_entry
+ PARAMS ((struct bfd_link_info *, bfd *, asection *, bfd_vma));
/* The linker script knows the section names for placement.
The entry_names are used to do simple name mangling on the stubs.
Given a function name, and its type, the stub can be found. The
- name can be changed. The only requirement is the %s be present.
- */
-
+ name can be changed. The only requirement is the %s be present. */
+
#define THUMB2ARM_GLUE_SECTION_NAME ".glue_7t"
#define THUMB2ARM_GLUE_ENTRY_NAME "__%s_from_thumb"
#define ARM2THUMB_GLUE_SECTION_NAME ".glue_7"
#define ARM2THUMB_GLUE_ENTRY_NAME "__%s_from_arm"
-/* Used by the assembler. */
+/* Used by the assembler. */
+
static bfd_reloc_status_type
coff_arm_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd,
error_message)
diff = reloc_entry->addend;
-#define DOIT(x) \
- x = ((x & ~howto->dst_mask) | (((x & howto->src_mask) + diff) & howto->dst_mask))
+#define DOIT(x) \
+ x = ((x & ~howto->dst_mask) \
+ | (((x & howto->src_mask) + diff) & howto->dst_mask))
if (diff != 0)
{
{
short x = bfd_get_16 (abfd, addr);
DOIT (x);
- bfd_put_16 (abfd, x, addr);
+ bfd_put_16 (abfd, (bfd_vma) x, addr);
}
break;
{
long x = bfd_get_32 (abfd, addr);
DOIT (x);
- bfd_put_32 (abfd, x, addr);
+ bfd_put_32 (abfd, (bfd_vma) x, addr);
}
break;
#endif
#ifndef PCRELOFFSET
-#define PCRELOFFSET true
+#define PCRELOFFSET TRUE
#endif
/* These most certainly belong somewhere else. Just had to get rid of
- the manifest constants in the code. */
-
+ the manifest constants in the code. */
#define ARM_8 0
#define ARM_16 1
#define ARM_32 2
#define ARM_THUMB12 13
#define ARM_THUMB23 14
-static reloc_howto_type aoutarm_std_reloc_howto[] =
-{
- /* type rs size bsz pcrel bitpos ovrf sf name part_inpl readmask setmask pcdone */
- HOWTO(ARM_8, /* type */
- 0, /* rightshift */
- 0, /* size */
- 8, /* bitsize */
- false, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- coff_arm_reloc, /* special_function */
- "ARM_8", /* name */
- true, /* partial_inplace */
- 0x000000ff, /* src_mask */
- 0x000000ff, /* dst_mask */
- PCRELOFFSET /* pcrel_offset */),
- HOWTO(ARM_16,
- 0,
- 1,
- 16,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "ARM_16",
- true,
- 0x0000ffff,
- 0x0000ffff,
- PCRELOFFSET),
- HOWTO(ARM_32,
- 0,
- 2,
- 32,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "ARM_32",
- true,
- 0xffffffff,
- 0xffffffff,
- PCRELOFFSET),
- HOWTO(ARM_26,
- 2,
- 2,
- 24,
- true,
- 0,
- complain_overflow_signed,
- aoutarm_fix_pcrel_26 ,
- "ARM_26",
- false,
- 0x00ffffff,
- 0x00ffffff,
- PCRELOFFSET),
- HOWTO(ARM_DISP8,
- 0,
- 0,
- 8,
- true,
- 0,
- complain_overflow_signed,
- coff_arm_reloc,
- "ARM_DISP8",
- true,
- 0x000000ff,
- 0x000000ff,
- true),
- HOWTO( ARM_DISP16,
- 0,
- 1,
- 16,
- true,
- 0,
- complain_overflow_signed,
- coff_arm_reloc,
- "ARM_DISP16",
- true,
- 0x0000ffff,
- 0x0000ffff,
- true),
- HOWTO( ARM_DISP32,
- 0,
- 2,
- 32,
- true,
- 0,
- complain_overflow_signed,
- coff_arm_reloc,
- "ARM_DISP32",
- true,
- 0xffffffff,
- 0xffffffff,
- true),
- HOWTO( ARM_26D,
- 2,
- 2,
- 24,
- false,
- 0,
- complain_overflow_dont,
- aoutarm_fix_pcrel_26_done,
- "ARM_26D",
- true,
- 0x00ffffff,
- 0x0,
- false),
- /* 8 is unused */
- EMPTY_HOWTO (-1),
- HOWTO( ARM_NEG16,
- 0,
- -1,
- 16,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "ARM_NEG16",
- true,
- 0x0000ffff,
- 0x0000ffff,
- false),
- HOWTO( ARM_NEG32,
- 0,
- -2,
- 32,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "ARM_NEG32",
- true,
- 0xffffffff,
- 0xffffffff,
- false),
- HOWTO( ARM_RVA32,
- 0,
- 2,
- 32,
- false,
- 0,
- complain_overflow_bitfield,
- coff_arm_reloc,
- "ARM_RVA32",
- true,
- 0xffffffff,
- 0xffffffff,
- PCRELOFFSET),
- HOWTO( ARM_THUMB9,
- 1,
- 1,
- 8,
- true,
- 0,
- complain_overflow_signed,
- coff_thumb_pcrel_9 ,
- "ARM_THUMB9",
- false,
- 0x000000ff,
- 0x000000ff,
- PCRELOFFSET),
- HOWTO( ARM_THUMB12,
- 1,
- 1,
- 11,
- true,
- 0,
- complain_overflow_signed,
- coff_thumb_pcrel_12 ,
- "ARM_THUMB12",
- false,
- 0x000007ff,
- 0x000007ff,
- PCRELOFFSET),
- HOWTO( ARM_THUMB23,
- 1,
- 2,
- 22,
- true,
- 0,
- complain_overflow_signed,
- coff_thumb_pcrel_23 ,
- "ARM_THUMB23",
- false,
- 0x07ff07ff,
- 0x07ff07ff,
- PCRELOFFSET),
-};
+#ifdef ARM_WINCE
+#undef ARM_32
+#undef ARM_RVA32
+#undef ARM_26
+#undef ARM_THUMB12
+#undef ARM_26D
+
+#define ARM_32 1
+#define ARM_RVA32 2
+#define ARM_26 3
+#define ARM_THUMB12 4
+#define ARM_26D 5
+#define ARM_SECTION 14
+#define ARM_SECREL 15
+#endif
+
+static reloc_howto_type aoutarm_std_reloc_howto[] =
+ {
+#ifdef ARM_WINCE
+ EMPTY_HOWTO (-1),
+ HOWTO (ARM_32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_RVA32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_RVA32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_26,
+ 2,
+ 2,
+ 24,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ aoutarm_fix_pcrel_26 ,
+ "ARM_26",
+ FALSE,
+ 0x00ffffff,
+ 0x00ffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB12,
+ 1,
+ 1,
+ 11,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_12 ,
+ "ARM_THUMB12",
+ FALSE,
+ 0x000007ff,
+ 0x000007ff,
+ PCRELOFFSET),
+ HOWTO (ARM_26D,
+ 2,
+ 2,
+ 24,
+ FALSE,
+ 0,
+ complain_overflow_dont,
+ aoutarm_fix_pcrel_26_done,
+ "ARM_26D",
+ TRUE,
+ 0x00ffffff,
+ 0x0,
+ FALSE),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ EMPTY_HOWTO (-1),
+ HOWTO (ARM_SECTION,
+ 0,
+ 1,
+ 16,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ PCRELOFFSET),
+ HOWTO (ARM_SECREL,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+#else /* not ARM_WINCE */
+ HOWTO (ARM_8, /* type */
+ 0, /* rightshift */
+ 0, /* size */
+ 8, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield, /* complain_on_overflow */
+ coff_arm_reloc, /* special_function */
+ "ARM_8", /* name */
+ TRUE, /* partial_inplace */
+ 0x000000ff, /* src_mask */
+ 0x000000ff, /* dst_mask */
+ PCRELOFFSET /* pcrel_offset */),
+ HOWTO (ARM_16,
+ 0,
+ 1,
+ 16,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ PCRELOFFSET),
+ HOWTO (ARM_32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_26,
+ 2,
+ 2,
+ 24,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ aoutarm_fix_pcrel_26 ,
+ "ARM_26",
+ FALSE,
+ 0x00ffffff,
+ 0x00ffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_DISP8,
+ 0,
+ 0,
+ 8,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_arm_reloc,
+ "ARM_DISP8",
+ TRUE,
+ 0x000000ff,
+ 0x000000ff,
+ TRUE),
+ HOWTO (ARM_DISP16,
+ 0,
+ 1,
+ 16,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_arm_reloc,
+ "ARM_DISP16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ TRUE),
+ HOWTO (ARM_DISP32,
+ 0,
+ 2,
+ 32,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_arm_reloc,
+ "ARM_DISP32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ TRUE),
+ HOWTO (ARM_26D,
+ 2,
+ 2,
+ 24,
+ FALSE,
+ 0,
+ complain_overflow_dont,
+ aoutarm_fix_pcrel_26_done,
+ "ARM_26D",
+ TRUE,
+ 0x00ffffff,
+ 0x0,
+ FALSE),
+ /* 8 is unused */
+ EMPTY_HOWTO (-1),
+ HOWTO (ARM_NEG16,
+ 0,
+ -1,
+ 16,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_NEG16",
+ TRUE,
+ 0x0000ffff,
+ 0x0000ffff,
+ FALSE),
+ HOWTO (ARM_NEG32,
+ 0,
+ -2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_NEG32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ FALSE),
+ HOWTO (ARM_RVA32,
+ 0,
+ 2,
+ 32,
+ FALSE,
+ 0,
+ complain_overflow_bitfield,
+ coff_arm_reloc,
+ "ARM_RVA32",
+ TRUE,
+ 0xffffffff,
+ 0xffffffff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB9,
+ 1,
+ 1,
+ 8,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_9 ,
+ "ARM_THUMB9",
+ FALSE,
+ 0x000000ff,
+ 0x000000ff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB12,
+ 1,
+ 1,
+ 11,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_12 ,
+ "ARM_THUMB12",
+ FALSE,
+ 0x000007ff,
+ 0x000007ff,
+ PCRELOFFSET),
+ HOWTO (ARM_THUMB23,
+ 1,
+ 2,
+ 22,
+ TRUE,
+ 0,
+ complain_overflow_signed,
+ coff_thumb_pcrel_23 ,
+ "ARM_THUMB23",
+ FALSE,
+ 0x07ff07ff,
+ 0x07ff07ff,
+ PCRELOFFSET)
+#endif /* not ARM_WINCE */
+ };
#define NUM_RELOCS NUM_ELEM (aoutarm_std_reloc_howto)
#ifdef COFF_WITH_PE
-/* Return true if this relocation should
- appear in the output .reloc section. */
+static bfd_boolean in_reloc_p PARAMS ((bfd *, reloc_howto_type *));
+/* Return TRUE if this relocation should
+ appear in the output .reloc section. */
-static boolean
+static bfd_boolean
in_reloc_p (abfd, howto)
bfd * abfd ATTRIBUTE_UNUSED;
reloc_howto_type * howto;
{
return !howto->pc_relative && howto->type != ARM_RVA32;
-}
+}
#endif
#define RTYPE2HOWTO(cache_ptr, dst) \
if (rel->r_type >= NUM_RELOCS)
return NULL;
-
+
howto = aoutarm_std_reloc_howto + rel->r_type;
if (rel->r_type == ARM_RVA32)
- *addendp -= pe_data(sec->output_section->owner)->pe_opthdr.ImageBase;
+ *addendp -= pe_data (sec->output_section->owner)->pe_opthdr.ImageBase;
return howto;
}
-/* Used by the assembler. */
+
+/* Used by the assembler. */
static bfd_reloc_status_type
aoutarm_fix_pcrel_26_done (abfd, reloc_entry, symbol, data, input_section,
return bfd_reloc_ok;
}
-/* Used by the assembler. */
+/* Used by the assembler. */
static bfd_reloc_status_type
aoutarm_fix_pcrel_26 (abfd, reloc_entry, symbol, data, input_section,
bfd_size_type addr = reloc_entry->address;
long target = bfd_get_32 (abfd, (bfd_byte *) data + addr);
bfd_reloc_status_type flag = bfd_reloc_ok;
-
- /* If this is an undefined symbol, return error */
+
+ /* If this is an undefined symbol, return error. */
if (symbol->section == &bfd_und_section
&& (symbol->flags & BSF_WEAK) == 0)
return output_bfd ? bfd_reloc_continue : bfd_reloc_undefined;
return bfd_reloc_continue;
relocation = (target & 0x00ffffff) << 2;
- relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend */
+ relocation = (relocation ^ 0x02000000) - 0x02000000; /* Sign extend. */
relocation += symbol->value;
relocation += symbol->section->output_section->vma;
relocation += symbol->section->output_offset;
relocation -= input_section->output_section->vma;
relocation -= input_section->output_offset;
relocation -= addr;
-
+
if (relocation & 3)
return bfd_reloc_overflow;
- /* Check for overflow */
+ /* Check for overflow. */
if (relocation & 0x02000000)
{
if ((relocation & ~ (bfd_vma) 0x03ffffff) != ~ (bfd_vma) 0x03ffffff)
flag = bfd_reloc_overflow;
}
- else if (relocation & ~0x03ffffff)
+ else if (relocation & ~(bfd_vma) 0x03ffffff)
flag = bfd_reloc_overflow;
target &= ~0x00ffffff;
target |= (relocation >> 2) & 0x00ffffff;
- bfd_put_32 (abfd, target, (bfd_byte *) data + addr);
+ bfd_put_32 (abfd, (bfd_vma) target, (bfd_byte *) data + addr);
/* Now the ARM magic... Change the reloc type so that it is marked as done.
Strictly this is only necessary if we are doing a partial relocation. */
default:
abort ();
}
-
- /* If this is an undefined symbol, return error */
+
+ /* If this is an undefined symbol, return error. */
if (symbol->section == &bfd_und_section
&& (symbol->flags & BSF_WEAK) == 0)
return output_bfd ? bfd_reloc_continue : bfd_reloc_undefined;
abort ();
}
- relocation = (relocation ^ signbit) - signbit; /* Sign extend */
+ relocation = (relocation ^ signbit) - signbit; /* Sign extend. */
relocation += symbol->value;
relocation += symbol->section->output_section->vma;
relocation += symbol->section->output_offset;
if (relocation & 1)
return bfd_reloc_overflow;
- /* Check for overflow */
+ /* Check for overflow. */
if (relocation & signbit)
{
if ((relocation & ~offmsk) != ~offmsk)
case b23:
if (bfd_big_endian (abfd))
- target |= ((relocation & 0xfff) >> 1) | ((relocation << 4) & 0x07ff0000);
+ target |= (((relocation & 0xfff) >> 1)
+ | ((relocation << 4) & 0x07ff0000));
else
- target |= ((relocation & 0xffe) << 15) | ((relocation >> 12) & 0x7ff);
+ target |= (((relocation & 0xffe) << 15)
+ | ((relocation >> 12) & 0x7ff));
break;
default:
abort ();
}
- bfd_put_32 (abfd, target, (bfd_byte *) data + addr);
+ bfd_put_32 (abfd, (bfd_vma) target, (bfd_byte *) data + addr);
/* Now the ARM magic... Change the reloc type so that it is marked as done.
Strictly this is only necessary if we are doing a partial relocation. */
reloc_entry->howto = & aoutarm_std_reloc_howto [ARM_26D];
-
- /* TODO: We should possibly have DONE entries for the THUMB PCREL relocations */
+
+ /* TODO: We should possibly have DONE entries for the THUMB PCREL relocations. */
return flag;
}
+#ifndef ARM_WINCE
static bfd_reloc_status_type
coff_thumb_pcrel_23 (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message)
char **error_message;
{
return coff_thumb_pcrel_common (abfd, reloc_entry, symbol, data,
- input_section, output_bfd, error_message, b23);
+ input_section, output_bfd, error_message,
+ b23);
}
static bfd_reloc_status_type
-coff_thumb_pcrel_12 (abfd, reloc_entry, symbol, data, input_section,
+coff_thumb_pcrel_9 (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message)
bfd *abfd;
arelent *reloc_entry;
char **error_message;
{
return coff_thumb_pcrel_common (abfd, reloc_entry, symbol, data,
- input_section, output_bfd, error_message, b12);
+ input_section, output_bfd, error_message,
+ b9);
}
+#endif /* not ARM_WINCE */
static bfd_reloc_status_type
-coff_thumb_pcrel_9 (abfd, reloc_entry, symbol, data, input_section,
+coff_thumb_pcrel_12 (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message)
bfd *abfd;
arelent *reloc_entry;
char **error_message;
{
return coff_thumb_pcrel_common (abfd, reloc_entry, symbol, data,
- input_section, output_bfd, error_message, b9);
+ input_section, output_bfd, error_message,
+ b12);
}
-
-static CONST struct reloc_howto_struct *
+static const struct reloc_howto_struct *
coff_arm_reloc_type_lookup (abfd, code)
bfd * abfd;
bfd_reloc_code_real_type code;
{
#define ASTD(i,j) case i: return aoutarm_std_reloc_howto + j
-
+
if (code == BFD_RELOC_CTOR)
switch (bfd_get_arch_info (abfd)->bits_per_address)
{
case 32:
code = BFD_RELOC_32;
break;
- default: return (CONST struct reloc_howto_struct *) 0;
+ default:
+ return (const struct reloc_howto_struct *) 0;
}
switch (code)
{
+#ifdef ARM_WINCE
+ ASTD (BFD_RELOC_32, ARM_32);
+ ASTD (BFD_RELOC_RVA, ARM_RVA32);
+ ASTD (BFD_RELOC_ARM_PCREL_BRANCH, ARM_26);
+ ASTD (BFD_RELOC_THUMB_PCREL_BRANCH12, ARM_THUMB12);
+#else
ASTD (BFD_RELOC_8, ARM_8);
ASTD (BFD_RELOC_16, ARM_16);
ASTD (BFD_RELOC_32, ARM_32);
ASTD (BFD_RELOC_ARM_PCREL_BRANCH, ARM_26);
+ ASTD (BFD_RELOC_ARM_PCREL_BLX, ARM_26);
ASTD (BFD_RELOC_8_PCREL, ARM_DISP8);
ASTD (BFD_RELOC_16_PCREL, ARM_DISP16);
ASTD (BFD_RELOC_32_PCREL, ARM_DISP32);
ASTD (BFD_RELOC_THUMB_PCREL_BRANCH9, ARM_THUMB9);
ASTD (BFD_RELOC_THUMB_PCREL_BRANCH12, ARM_THUMB12);
ASTD (BFD_RELOC_THUMB_PCREL_BRANCH23, ARM_THUMB23);
- default: return (CONST struct reloc_howto_struct *) 0;
+ ASTD (BFD_RELOC_THUMB_PCREL_BLX, ARM_THUMB23);
+#endif
+ default: return (const struct reloc_howto_struct *) 0;
}
}
#define BADMAG(x) ARMBADMAG(x)
#define ARM 1 /* Customize coffcode.h */
+#ifndef ARM_WINCE
+/* Make sure that the 'r_offset' field is copied properly
+ so that identical binaries will compare the same. */
+#define SWAP_IN_RELOC_OFFSET H_GET_32
+#define SWAP_OUT_RELOC_OFFSET H_PUT_32
+#endif
+
/* Extend the coff_link_hash_table structure with a few ARM specific fields.
This allows us to store global data here without actually creating any
global variables, which is a no-no in the BFD world. */
struct coff_arm_link_hash_table
-{
- /* The original coff_link_hash_table structure. MUST be first field. */
- struct coff_link_hash_table root;
-
- /* The size in bytes of the section containg the Thumb-to-ARM glue. */
- long int thumb_glue_size;
-
- /* The size in bytes of the section containg the ARM-to-Thumb glue. */
- long int arm_glue_size;
-
- /* An arbitary input BFD chosen to hold the glue sections. */
- bfd * bfd_of_glue_owner;
-
- /* Support interworking with old, non-interworking aware ARM code. */
- int support_old_code;
+ {
+ /* The original coff_link_hash_table structure. MUST be first field. */
+ struct coff_link_hash_table root;
+
+ /* The size in bytes of the section containg the Thumb-to-ARM glue. */
+ bfd_size_type thumb_glue_size;
+
+ /* The size in bytes of the section containg the ARM-to-Thumb glue. */
+ bfd_size_type arm_glue_size;
+
+ /* An arbitary input BFD chosen to hold the glue sections. */
+ bfd * bfd_of_glue_owner;
+
+ /* Support interworking with old, non-interworking aware ARM code. */
+ int support_old_code;
};
/* Get the ARM coff linker hash table from a link_info structure. */
bfd * abfd;
{
struct coff_arm_link_hash_table * ret;
+ bfd_size_type amt = sizeof (struct coff_arm_link_hash_table);
- ret = ((struct coff_arm_link_hash_table *)
- bfd_alloc (abfd, sizeof (struct coff_arm_link_hash_table)));
+ ret = (struct coff_arm_link_hash_table *) bfd_malloc (amt);
if (ret == (struct coff_arm_link_hash_table *) NULL)
return NULL;
if (! _bfd_coff_link_hash_table_init
(& ret->root, abfd, _bfd_coff_link_hash_newfunc))
{
- bfd_release (abfd, ret);
+ free (ret);
return (struct bfd_link_hash_table *) NULL;
}
+ input_section->output_offset
+ input_section->output_section->vma;
- if (coff_data(output_bfd)->pe)
- addr -= pe_data(output_bfd)->pe_opthdr.ImageBase;
- fwrite (&addr, 1, sizeof (addr), (FILE *) info->base_file);
+ if (coff_data (output_bfd)->pe)
+ addr -= pe_data (output_bfd)->pe_opthdr.ImageBase;
+ fwrite (& addr, 1, sizeof (addr), (FILE *) info->base_file);
}
\f
+#ifndef ARM_WINCE
/* The thumb form of a long branch is a bit finicky, because the offset
encoding is split over two fields, each in it's own instruction. They
- can occur in any order. So given a thumb form of long branch, and an
+ can occur in any order. So given a thumb form of long branch, and an
offset, insert the offset into the thumb branch and return finished
- instruction.
+ instruction.
- It takes two thumb instructions to encode the target address. Each has
+ It takes two thumb instructions to encode the target address. Each has
11 bits to invest. The upper 11 bits are stored in one (identifed by
- H-0.. see below), the lower 11 bits are stored in the other (identified
- by H-1).
+ H-0.. see below), the lower 11 bits are stored in the other (identified
+ by H-1).
- Combine together and shifted left by 1 (it's a half word address) and
+ Combine together and shifted left by 1 (it's a half word address) and
there you have it.
Op: 1111 = F,
Op: 1111 = F,
H-1, lower address-0 = 800
- They can be ordered either way, but the arm tools I've seen always put
+ They can be ordered either way, but the arm tools I've seen always put
the lower one first. It probably doesn't matter. krk@cygnus.com
XXX: Actually the order does matter. The second instruction (H-1)
moves the computed address into the PC, so it must be the second one
in the sequence. The problem, however is that whilst little endian code
stores the instructions in HI then LOW order, big endian code does the
- reverse. nickc@cygnus.com */
+ reverse. nickc@cygnus.com. */
#define LOW_HI_ORDER 0xF800F000
#define HI_LOW_ORDER 0xF000F800
unsigned int low_bits;
unsigned int high_bits;
-
BFD_ASSERT((rel_off & 1) != 1);
rel_off >>= 1; /* half word aligned address */
else if ((br_insn & HI_LOW_ORDER) == HI_LOW_ORDER)
br_insn = HI_LOW_ORDER | (high_bits << 16) | low_bits;
else
- abort(); /* error - not a valid branch instruction form */
-
- /* FIXME: abort is probably not the right call. krk@cygnus.com */
+ /* FIXME: the BFD library should never abort except for internal errors
+ - it should return an error status. */
+ abort (); /* Error - not a valid branch instruction form. */
return br_insn;
}
\f
static struct coff_link_hash_entry *
find_thumb_glue (info, name, input_bfd)
- struct bfd_link_info * info;
- CONST char * name;
- bfd * input_bfd;
+ struct bfd_link_info *info;
+ const char *name;
+ bfd *input_bfd;
{
- char * tmp_name;
- struct coff_link_hash_entry * myh;
+ char *tmp_name;
+ struct coff_link_hash_entry *myh;
+ bfd_size_type amt = strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1;
- tmp_name = ((char *)
- bfd_malloc (strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1));
+ tmp_name = (char *) bfd_malloc (amt);
BFD_ASSERT (tmp_name);
sprintf (tmp_name, THUMB2ARM_GLUE_ENTRY_NAME, name);
-
+
myh = coff_link_hash_lookup
- (coff_hash_table (info), tmp_name, false, false, true);
-
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
if (myh == NULL)
/* xgettext:c-format */
_bfd_error_handler (_("%s: unable to find THUMB glue '%s' for `%s'"),
- bfd_get_filename (input_bfd), tmp_name, name);
-
+ bfd_archive_filename (input_bfd), tmp_name, name);
+
free (tmp_name);
return myh;
}
+#endif /* not ARM_WINCE */
static struct coff_link_hash_entry *
find_arm_glue (info, name, input_bfd)
- struct bfd_link_info * info;
- CONST char * name;
- bfd * input_bfd;
+ struct bfd_link_info *info;
+ const char *name;
+ bfd *input_bfd;
{
- char * tmp_name;
+ char *tmp_name;
struct coff_link_hash_entry * myh;
+ bfd_size_type amt = strlen (name) + strlen (ARM2THUMB_GLUE_ENTRY_NAME) + 1;
- tmp_name = ((char *)
- bfd_malloc (strlen (name) + strlen (ARM2THUMB_GLUE_ENTRY_NAME) + 1));
+ tmp_name = (char *) bfd_malloc (amt);
BFD_ASSERT (tmp_name);
sprintf (tmp_name, ARM2THUMB_GLUE_ENTRY_NAME, name);
-
+
myh = coff_link_hash_lookup
- (coff_hash_table (info), tmp_name, false, false, true);
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
if (myh == NULL)
/* xgettext:c-format */
_bfd_error_handler (_("%s: unable to find ARM glue '%s' for `%s'"),
- bfd_get_filename (input_bfd), tmp_name, name);
-
+ bfd_archive_filename (input_bfd), tmp_name, name);
+
free (tmp_name);
return myh;
ldmia r13! {r6, lr}
bx lr
__func_addr:
- .word func
+ .word func
*/
#define THUMB2ARM_GLUE_SIZE (globals->support_old_code ? 20 : 8)
instruction we should generate a trampoline stub (needed to
address the complete 32bit address space). */
-/* The standard COFF backend linker does not cope with the special
+/* The standard COFF backend linker does not cope with the special
Thumb BRANCH23 relocation. The alternative would be to split the
BRANCH23 into seperate HI23 and LO23 relocations. However, it is a
- bit simpler simply providing our own relocation driver. */
+ bit simpler simply providing our own relocation driver. */
/* The reloc processing routine for the ARM/Thumb COFF linker. NOTE:
This code is a very slightly modified copy of
ARM/Thumb builds. It is only the code marked THUMBEXTENSION that
is different from the original. */
-static boolean
+static bfd_boolean
coff_arm_relocate_section (output_bfd, info, input_bfd, input_section,
contents, relocs, syms, sections)
bfd *output_bfd;
sym = NULL;
}
else
- {
+ {
h = obj_coff_sym_hashes (input_bfd)[symndx];
sym = syms + symndx;
}
else
addend = 0;
-
howto = coff_rtype_to_howto (input_bfd, input_section, rel, h,
sym, &addend);
if (howto == NULL)
- return false;
+ return FALSE;
/* The relocation_section function will skip pcrel_offset relocs
- when doing a relocateable link. However, we want to convert
+ when doing a relocatable link. However, we want to convert
ARM26 to ARM26D relocs if possible. We return a fake howto in
this case without pcrel_offset set, and adjust the addend to
compensate. */
if (rel->r_type == ARM_26
&& h != NULL
- && info->relocateable
+ && info->relocatable
&& (h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak)
- && h->root.u.def.section->output_section == input_section->output_section)
+ && (h->root.u.def.section->output_section
+ == input_section->output_section))
{
- static reloc_howto_type fake_arm26_reloc =
+ static reloc_howto_type fake_arm26_reloc =
HOWTO (ARM_26,
2,
2,
24,
- true,
+ TRUE,
0,
complain_overflow_signed,
aoutarm_fix_pcrel_26 ,
"ARM_26",
- false,
+ FALSE,
0x00ffffff,
- 0x00ffffff,
- false);
+ 0x00ffffff,
+ FALSE);
addend -= rel->r_vaddr - input_section->vma;
howto = &fake_arm26_reloc;
}
- /* If we are doing a relocateable link, then we can just ignore
+#ifdef ARM_WINCE
+ /* MS ARM-CE makes the reloc relative to the opcode's pc, not
+ the next opcode's pc, so is off by one. */
+#if 0 /* This appears to have been true for WINCE 2.0, but it is not
+ true for WINCE 3.0. */
+ if (howto->pc_relative && !info->relocatable)
+ addend -= 8;
+#endif
+#endif
+
+ /* If we are doing a relocatable link, then we can just ignore
a PC relative reloc that is pcrel_offset. It will already
- have the correct value. If this is not a relocateable link,
+ have the correct value. If this is not a relocatable link,
then we should ignore the symbol value. */
if (howto->pc_relative && howto->pcrel_offset)
{
- if (info->relocateable)
+ if (info->relocatable)
continue;
+ /* FIXME - it is not clear which targets need this next test
+ and which do not. It is known that it is needed for the
+ VxWorks and EPOC-PE targets, but it is also known that it
+ was supressed for other ARM targets. This ought to be
+ sorted out one day. */
+#ifdef ARM_COFF_BUGFIX
+ /* We must not ignore the symbol value. If the symbol is
+ within the same section, the relocation should have already
+ been fixed, but if it is not, we'll be handed a reloc into
+ the beginning of the symbol's section, so we must not cancel
+ out the symbol's value, otherwise we'll be adding it in
+ twice. */
if (sym != NULL && sym->n_scnum != 0)
addend += sym->n_value;
+#endif
}
val = 0;
relocatable output file, since we may as well leave the
stub generation to the final linker pass. If we fail to
verify that the name is defined, we'll try to build stubs
- for an undefined name... */
- if (! info->relocateable
+ for an undefined name... */
+ if (! info->relocatable
&& ( h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak))
{
asection * h_sec = h->root.u.def.section;
const char * name = h->root.root.string;
-
+
/* h locates the symbol referenced in the reloc. */
h_val = (h->root.u.def.value
+ h_sec->output_section->vma
if ( h->class == C_THUMBSTATFUNC
|| h->class == C_THUMBEXTFUNC)
{
- /* Arm code calling a Thumb function */
+ /* Arm code calling a Thumb function. */
unsigned long int tmp;
- long int my_offset;
+ bfd_vma my_offset;
asection * s;
long int ret_offset;
- struct coff_link_hash_entry * myh;
+ struct coff_link_hash_entry * myh;
struct coff_arm_link_hash_table * globals;
-
+
myh = find_arm_glue (info, name, input_bfd);
if (myh == NULL)
- return false;
+ return FALSE;
globals = coff_arm_hash_table (info);
BFD_ASSERT (globals != NULL);
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
-
+
my_offset = myh->root.u.def.value;
-
- s = bfd_get_section_by_name (globals->bfd_of_glue_owner,
+
+ s = bfd_get_section_by_name (globals->bfd_of_glue_owner,
ARM2THUMB_GLUE_SECTION_NAME);
BFD_ASSERT (s != NULL);
BFD_ASSERT (s->contents != NULL);
_bfd_error_handler
/* xgettext:c-format */
(_("%s(%s): warning: interworking not enabled."),
- bfd_get_filename (h_sec->owner), name);
+ bfd_archive_filename (h_sec->owner), name);
_bfd_error_handler
/* xgettext:c-format */
(_(" first occurrence: %s: arm call to thumb"),
- bfd_get_filename (input_bfd));
+ bfd_archive_filename (input_bfd));
}
--my_offset;
myh->root.u.def.value = my_offset;
- bfd_put_32 (output_bfd, a2t1_ldr_insn,
+ bfd_put_32 (output_bfd, (bfd_vma) a2t1_ldr_insn,
s->contents + my_offset);
-
- bfd_put_32 (output_bfd, a2t2_bx_r12_insn,
+
+ bfd_put_32 (output_bfd, (bfd_vma) a2t2_bx_r12_insn,
s->contents + my_offset + 4);
-
+
/* It's a thumb address. Add the low order bit. */
bfd_put_32 (output_bfd, h_val | a2t3_func_addr_insn,
s->contents + my_offset + 8);
if (info->base_file)
- arm_emit_base_file_entry (info, output_bfd, s,
- my_offset + 8);
+ arm_emit_base_file_entry (info, output_bfd, s,
+ my_offset + 8);
}
tmp = bfd_get_32 (input_bfd, contents + rel->r_vaddr
- input_section->vma);
-
+
tmp = tmp & 0xFF000000;
- /* Somehow these are both 4 too far, so subtract 8. */
+ /* Somehow these are both 4 too far, so subtract 8. */
ret_offset =
s->output_offset
- + my_offset
+ + my_offset
+ s->output_section->vma
- (input_section->output_offset
- + input_section->output_section->vma
+ + input_section->output_section->vma
+ rel->r_vaddr)
- 8;
tmp = tmp | ((ret_offset >> 2) & 0x00FFFFFF);
-
- bfd_put_32 (output_bfd, tmp, contents + rel->r_vaddr
- - input_section->vma);
+
+ bfd_put_32 (output_bfd, (bfd_vma) tmp,
+ contents + rel->r_vaddr - input_section->vma);
done = 1;
}
}
-
- /* Note: We used to check for ARM_THUMB9 and ARM_THUMB12 */
+
+#ifndef ARM_WINCE
+ /* Note: We used to check for ARM_THUMB9 and ARM_THUMB12. */
else if (howto->type == ARM_THUMB23)
{
- if ( h->class == C_EXT
+ if ( h->class == C_EXT
|| h->class == C_STAT
|| h->class == C_LABEL)
{
/* Thumb code calling an ARM function */
asection * s = 0;
- long int my_offset;
+ bfd_vma my_offset;
unsigned long int tmp;
long int ret_offset;
struct coff_link_hash_entry * myh;
myh = find_thumb_glue (info, name, input_bfd);
if (myh == NULL)
- return false;
+ return FALSE;
globals = coff_arm_hash_table (info);
-
+
BFD_ASSERT (globals != NULL);
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
-
+
my_offset = myh->root.u.def.value;
-
- s = bfd_get_section_by_name (globals->bfd_of_glue_owner,
+
+ s = bfd_get_section_by_name (globals->bfd_of_glue_owner,
THUMB2ARM_GLUE_SECTION_NAME);
-
+
BFD_ASSERT (s != NULL);
BFD_ASSERT (s->contents != NULL);
BFD_ASSERT (s->output_section != NULL);
-
+
if ((my_offset & 0x01) == 0x01)
{
if (h_sec->owner != NULL
_bfd_error_handler
/* xgettext:c-format */
(_("%s(%s): warning: interworking not enabled."),
- bfd_get_filename (h_sec->owner), name);
+ bfd_archive_filename (h_sec->owner), name);
_bfd_error_handler
/* xgettext:c-format */
(_(" first occurrence: %s: thumb call to arm"),
- bfd_get_filename (input_bfd));
+ bfd_archive_filename (input_bfd));
_bfd_error_handler
(_(" consider relinking with --support-old-code enabled"));
}
-
+
-- my_offset;
myh->root.u.def.value = my_offset;
if (globals->support_old_code)
{
- bfd_put_16 (output_bfd, t2a1_push_insn,
+ bfd_put_16 (output_bfd, (bfd_vma) t2a1_push_insn,
s->contents + my_offset);
-
- bfd_put_16 (output_bfd, t2a2_ldr_insn,
+
+ bfd_put_16 (output_bfd, (bfd_vma) t2a2_ldr_insn,
s->contents + my_offset + 2);
- bfd_put_16 (output_bfd, t2a3_mov_insn,
+ bfd_put_16 (output_bfd, (bfd_vma) t2a3_mov_insn,
s->contents + my_offset + 4);
- bfd_put_16 (output_bfd, t2a4_bx_insn,
+ bfd_put_16 (output_bfd, (bfd_vma) t2a4_bx_insn,
s->contents + my_offset + 6);
-
- bfd_put_32 (output_bfd, t2a5_pop_insn,
+
+ bfd_put_32 (output_bfd, (bfd_vma) t2a5_pop_insn,
s->contents + my_offset + 8);
-
- bfd_put_32 (output_bfd, t2a6_bx_insn,
+
+ bfd_put_32 (output_bfd, (bfd_vma) t2a6_bx_insn,
s->contents + my_offset + 12);
-
+
/* Store the address of the function in the last word of the stub. */
bfd_put_32 (output_bfd, h_val,
s->contents + my_offset + 16);
if (info->base_file)
- arm_emit_base_file_entry (info, output_bfd, s, my_offset + 16);
+ arm_emit_base_file_entry (info, output_bfd, s,
+ my_offset + 16);
}
else
{
- bfd_put_16 (output_bfd, t2a1_bx_pc_insn,
+ bfd_put_16 (output_bfd, (bfd_vma) t2a1_bx_pc_insn,
s->contents + my_offset);
-
- bfd_put_16 (output_bfd, t2a2_noop_insn,
+
+ bfd_put_16 (output_bfd, (bfd_vma) t2a2_noop_insn,
s->contents + my_offset + 2);
-
+
ret_offset =
- ((bfd_signed_vma) h_val) /* Address of destination of the stub */
+ ((bfd_signed_vma) h_val) /* Address of destination of the stub. */
- ((bfd_signed_vma)
(s->output_offset /* Offset from the start of the current section to the start of the stubs. */
+ my_offset /* Offset of the start of this stub from the start of the stubs. */
+ s->output_section->vma) /* Address of the start of the current section. */
+ 4 /* The branch instruction is 4 bytes into the stub. */
+ 8); /* ARM branches work from the pc of the instruction + 8. */
-
+
bfd_put_32 (output_bfd,
- t2a3_b_insn | ((ret_offset >> 2) & 0x00FFFFFF),
+ (bfd_vma) t2a3_b_insn | ((ret_offset >> 2) & 0x00FFFFFF),
s->contents + my_offset + 4);
}
- (input_section->output_offset
+ rel->r_vaddr)
-4;
-
+
tmp = bfd_get_32 (input_bfd, contents + rel->r_vaddr
- input_section->vma);
bfd_put_32 (output_bfd,
- insert_thumb_branch (tmp, ret_offset),
- contents + rel->r_vaddr
- - input_section->vma);
-
+ (bfd_vma) insert_thumb_branch (tmp,
+ ret_offset),
+ contents + rel->r_vaddr - input_section->vma);
+
done = 1;
}
}
+#endif
}
-
+
/* If the relocation type and destination symbol does not
fall into one of the above categories, then we can just
- perform a direct link. */
+ perform a direct link. */
if (done)
rstat = bfd_reloc_ok;
- else
+ else
#endif /* THUMBEXTENSION */
if ( h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak)
+ sec->output_offset);
}
- else if (! info->relocateable)
+ else if (! info->relocatable)
{
if (! ((*info->callbacks->undefined_symbol)
(info, h->root.root.string, input_bfd, input_section,
- rel->r_vaddr - input_section->vma)))
- return false;
+ rel->r_vaddr - input_section->vma, TRUE)))
+ return FALSE;
}
}
if (info->base_file)
{
- /* Emit a reloc if the backend thinks it needs it. */
+ /* Emit a reloc if the backend thinks it needs it. */
if (sym && pe_data(output_bfd)->in_reloc_p(output_bfd, howto))
- arm_emit_base_file_entry (info, output_bfd, input_section, rel->r_vaddr);
+ arm_emit_base_file_entry (info, output_bfd, input_section,
+ rel->r_vaddr);
}
-
+
#if 1 /* THUMBEXTENSION */
if (done)
rstat = bfd_reloc_ok;
+#ifndef ARM_WINCE
/* Only perform this fix during the final link, not a relocatable link. nickc@cygnus.com */
- else if (! info->relocateable
+ else if (! info->relocatable
&& howto->type == ARM_THUMB23)
{
/* This is pretty much a copy of what the default
instruction. Again, it would probably be simpler adding a
ThumbBRANCH23 specific macro expansion into the default
code. */
-
+
bfd_vma address = rel->r_vaddr - input_section->vma;
-
+
if (address > input_section->_raw_size)
rstat = bfd_reloc_outofrange;
else
{
- bfd_vma relocation = val + addend;
- int size = bfd_get_reloc_size (howto);
- boolean overflow = false;
- bfd_byte * location = contents + address;
- bfd_vma x = bfd_get_32 (input_bfd, location);
- bfd_vma src_mask = 0x007FFFFE;
- bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
- bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
- bfd_vma check;
- bfd_signed_vma signed_check;
- bfd_vma add;
- bfd_signed_vma signed_add;
+ bfd_vma relocation = val + addend;
+ int size = bfd_get_reloc_size (howto);
+ bfd_boolean overflow = FALSE;
+ bfd_byte *location = contents + address;
+ bfd_vma x = bfd_get_32 (input_bfd, location);
+ bfd_vma src_mask = 0x007FFFFE;
+ bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
+ bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
+ bfd_vma check;
+ bfd_signed_vma signed_check;
+ bfd_vma add;
+ bfd_signed_vma signed_add;
BFD_ASSERT (size == 4);
-
- /* howto->pc_relative should be TRUE for type 14 BRANCH23 */
+
+ /* howto->pc_relative should be TRUE for type 14 BRANCH23. */
relocation -= (input_section->output_section->vma
+ input_section->output_offset);
-
- /* howto->pcrel_offset should be TRUE for type 14 BRANCH23 */
+
+ /* howto->pcrel_offset should be TRUE for type 14 BRANCH23. */
relocation -= address;
-
- /* No need to negate the relocation with BRANCH23. */
+
+ /* No need to negate the relocation with BRANCH23. */
/* howto->complain_on_overflow == complain_overflow_signed for BRANCH23. */
/* howto->rightshift == 1 */
+
/* Drop unwanted bits from the value we are relocating to. */
-
check = relocation >> howto->rightshift;
-
+
/* If this is a signed value, the rightshift just dropped
leading 1 bits (assuming twos complement). */
if ((bfd_signed_vma) relocation >= 0)
signed_check = (check
| ((bfd_vma) - 1
& ~((bfd_vma) - 1 >> howto->rightshift)));
-
+
/* Get the value from the object file. */
if (bfd_big_endian (input_bfd))
- {
- add = (((x) & 0x07ff0000) >> 4) | (((x) & 0x7ff) << 1);
- }
+ add = (((x) & 0x07ff0000) >> 4) | (((x) & 0x7ff) << 1);
else
- {
- add = ((((x) & 0x7ff) << 12) | (((x) & 0x07ff0000) >> 15));
- }
+ add = ((((x) & 0x7ff) << 12) | (((x) & 0x07ff0000) >> 15));
/* Get the value from the object file with an appropriate sign.
The expression involving howto->src_mask isolates the upper
can not get the upper bit, but that does not matter since
signed_add needs no adjustment to become negative in that
case. */
-
signed_add = add;
-
+
if ((add & (((~ src_mask) >> 1) & src_mask)) != 0)
signed_add -= (((~ src_mask) >> 1) & src_mask) << 1;
-
+
+ /* howto->bitpos == 0 */
/* Add the value from the object file, shifted so that it is a
straight number. */
- /* howto->bitpos == 0 */
-
signed_check += signed_add;
- relocation += signed_add;
+ relocation += signed_add;
BFD_ASSERT (howto->complain_on_overflow == complain_overflow_signed);
/* Assumes two's complement. */
if ( signed_check > reloc_signed_max
|| signed_check < reloc_signed_min)
- overflow = true;
-
- /* Put RELOCATION into the correct bits: */
-
+ overflow = TRUE;
+
+ /* Put the relocation into the correct bits.
+ For a BLX instruction, make sure that the relocation is rounded up
+ to a word boundary. This follows the semantics of the instruction
+ which specifies that bit 1 of the target address will come from bit
+ 1 of the base address. */
if (bfd_big_endian (input_bfd))
- {
+ {
+ if ((x & 0x1800) == 0x0800 && (relocation & 0x02))
+ relocation += 2;
relocation = (((relocation & 0xffe) >> 1) | ((relocation << 4) & 0x07ff0000));
}
else
- {
+ {
+ if ((x & 0x18000000) == 0x08000000 && (relocation & 0x02))
+ relocation += 2;
relocation = (((relocation & 0xffe) << 15) | ((relocation >> 12) & 0x7ff));
}
-
- /* Add RELOCATION to the correct bits of X: */
+
+ /* Add the relocation to the correct bits of X. */
x = ((x & ~howto->dst_mask) | relocation);
- /* Put the relocated value back in the object file: */
+ /* Put the relocated value back in the object file. */
bfd_put_32 (input_bfd, x, location);
rstat = overflow ? bfd_reloc_overflow : bfd_reloc_ok;
}
}
+#endif
else
#endif /* THUMBEXTENSION */
rstat = _bfd_final_link_relocate (howto, input_bfd, input_section,
rel->r_vaddr - input_section->vma,
val, addend);
#if 1 /* THUMBEXTENSION */
- /* FIXME:
+ /* FIXME:
Is this the best way to fix up thumb addresses? krk@cygnus.com
Probably not, but it works, and if it works it don't need fixing! nickc@cygnus.com */
/* Only perform this fix during the final link, not a relocatable link. nickc@cygnus.com */
- if (! info->relocateable
+ if (! info->relocatable
&& (rel->r_type == ARM_32 || rel->r_type == ARM_RVA32))
{
/* Determine if we need to set the bottom bit of a relocated address
because the address is the address of a Thumb code symbol. */
-
- int patchit = false;
-
+
+ int patchit = FALSE;
+
if (h != NULL
&& ( h->class == C_THUMBSTATFUNC
|| h->class == C_THUMBEXTFUNC))
{
- patchit = true;
+ patchit = TRUE;
}
else if (sym != NULL
&& sym->n_scnum > N_UNDEF)
if ( sym->n_sclass == C_THUMBSTATFUNC
|| sym->n_sclass == C_THUMBEXTFUNC)
- patchit = true;
+ patchit = TRUE;
}
if (patchit)
bfd_put_32 (input_bfd, x | 1, location);
}
}
-#endif /* THUMBEXTENSION */
-
+#endif /* THUMBEXTENSION */
+
switch (rstat)
{
default:
case bfd_reloc_outofrange:
(*_bfd_error_handler)
(_("%s: bad reloc address 0x%lx in section `%s'"),
- bfd_get_filename (input_bfd),
+ bfd_archive_filename (input_bfd),
(unsigned long) rel->r_vaddr,
bfd_get_section_name (input_bfd, input_section));
- return false;
+ return FALSE;
case bfd_reloc_overflow:
{
const char *name;
{
name = _bfd_coff_internal_syment_name (input_bfd, sym, buf);
if (name == NULL)
- return false;
+ return FALSE;
}
if (! ((*info->callbacks->reloc_overflow)
(info, name, howto->name, (bfd_vma) 0, input_bfd,
input_section, rel->r_vaddr - input_section->vma)))
- return false;
+ return FALSE;
}
}
}
- return true;
+ return TRUE;
}
#ifndef COFF_IMAGE_WITH_PE
-boolean
-bfd_arm_allocate_interworking_sections (info)
+bfd_boolean
+bfd_arm_allocate_interworking_sections (info)
struct bfd_link_info * info;
{
asection * s;
#endif
globals = coff_arm_hash_table (info);
-
+
BFD_ASSERT (globals != NULL);
if (globals->arm_glue_size != 0)
{
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
-
+
s = bfd_get_section_by_name
(globals->bfd_of_glue_owner, ARM2THUMB_GLUE_SECTION_NAME);
BFD_ASSERT (s != NULL);
-
- foo = (bfd_byte *) bfd_alloc
- (globals->bfd_of_glue_owner, globals->arm_glue_size);
+
+ foo = (bfd_byte *) bfd_alloc (globals->bfd_of_glue_owner,
+ globals->arm_glue_size);
#if 0
- memset (foo, test_char, globals->arm_glue_size);
+ memset (foo, test_char, (size_t) globals->arm_glue_size);
#endif
-
+
s->_raw_size = s->_cooked_size = globals->arm_glue_size;
s->contents = foo;
}
if (globals->thumb_glue_size != 0)
{
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
-
+
s = bfd_get_section_by_name
(globals->bfd_of_glue_owner, THUMB2ARM_GLUE_SECTION_NAME);
BFD_ASSERT (s != NULL);
-
- foo = (bfd_byte *) bfd_alloc
- (globals->bfd_of_glue_owner, globals->thumb_glue_size);
+
+ foo = (bfd_byte *) bfd_alloc (globals->bfd_of_glue_owner,
+ globals->thumb_glue_size);
#if 0
- memset (foo, test_char, globals->thumb_glue_size);
+ memset (foo, test_char, (size_t) globals->thumb_glue_size);
#endif
-
+
s->_raw_size = s->_cooked_size = globals->thumb_glue_size;
s->contents = foo;
}
- return true;
+ return TRUE;
}
static void
register asection * s;
char * tmp_name;
struct coff_link_hash_entry * myh;
+ struct bfd_link_hash_entry * bh;
struct coff_arm_link_hash_table * globals;
+ bfd_vma val;
+ bfd_size_type amt;
globals = coff_arm_hash_table (info);
BFD_ASSERT (s != NULL);
- tmp_name = ((char *)
- bfd_malloc (strlen (name) + strlen (ARM2THUMB_GLUE_ENTRY_NAME) + 1));
+ amt = strlen (name) + strlen (ARM2THUMB_GLUE_ENTRY_NAME) + 1;
+ tmp_name = (char *) bfd_malloc (amt);
BFD_ASSERT (tmp_name);
sprintf (tmp_name, ARM2THUMB_GLUE_ENTRY_NAME, name);
-
+
myh = coff_link_hash_lookup
- (coff_hash_table (info), tmp_name, false, false, true);
-
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
if (myh != NULL)
{
free (tmp_name);
though the section isn't allocated yet, this is where we will be putting
it. */
+ bh = NULL;
+ val = globals->arm_glue_size + 1;
bfd_coff_link_add_one_symbol (info, globals->bfd_of_glue_owner, tmp_name,
- BSF_GLOBAL,
- s, globals->arm_glue_size + 1,
- NULL, true, false,
- (struct bfd_link_hash_entry **) & myh);
-
+ BSF_GLOBAL, s, val, NULL, TRUE, FALSE, &bh);
+
free (tmp_name);
-
+
globals->arm_glue_size += ARM2THUMB_GLUE_SIZE;
return;
}
+#ifndef ARM_WINCE
static void
record_thumb_to_arm_glue (info, h)
struct bfd_link_info * info;
register asection * s;
char * tmp_name;
struct coff_link_hash_entry * myh;
+ struct bfd_link_hash_entry * bh;
struct coff_arm_link_hash_table * globals;
+ bfd_vma val;
+ bfd_size_type amt;
-
globals = coff_arm_hash_table (info);
-
+
BFD_ASSERT (globals != NULL);
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
BFD_ASSERT (s != NULL);
- tmp_name = (char *) bfd_malloc (strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1);
+ amt = strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1;
+ tmp_name = (char *) bfd_malloc (amt);
BFD_ASSERT (tmp_name);
sprintf (tmp_name, THUMB2ARM_GLUE_ENTRY_NAME, name);
myh = coff_link_hash_lookup
- (coff_hash_table (info), tmp_name, false, false, true);
-
+ (coff_hash_table (info), tmp_name, FALSE, FALSE, TRUE);
+
if (myh != NULL)
{
free (tmp_name);
return; /* we've already seen this guy */
}
+ bh = NULL;
+ val = globals->thumb_glue_size + 1;
bfd_coff_link_add_one_symbol (info, globals->bfd_of_glue_owner, tmp_name,
- BSF_GLOBAL, s, globals->thumb_glue_size + 1,
- NULL, true, false,
- (struct bfd_link_hash_entry **) & myh);
-
+ BSF_GLOBAL, s, val, NULL, TRUE, FALSE, &bh);
+
/* If we mark it 'thumb', the disassembler will do a better job. */
+ myh = (struct coff_link_hash_entry *) bh;
myh->class = C_THUMBEXTFUNC;
free (tmp_name);
/* Allocate another symbol to mark where we switch to arm mode. */
-
+
#define CHANGE_TO_ARM "__%s_change_to_arm"
#define BACK_FROM_ARM "__%s_back_from_arm"
-
- tmp_name = (char *) bfd_malloc (strlen (name) + strlen (CHANGE_TO_ARM) + 1);
-
+
+ amt = strlen (name) + strlen (CHANGE_TO_ARM) + 1;
+ tmp_name = (char *) bfd_malloc (amt);
+
BFD_ASSERT (tmp_name);
-
+
sprintf (tmp_name, globals->support_old_code ? BACK_FROM_ARM : CHANGE_TO_ARM, name);
- myh = NULL;
-
+ bh = NULL;
+ val = globals->thumb_glue_size + (globals->support_old_code ? 8 : 4);
bfd_coff_link_add_one_symbol (info, globals->bfd_of_glue_owner, tmp_name,
- BSF_LOCAL, s, globals->thumb_glue_size
- + (globals->support_old_code ? 8 : 4),
- NULL, true, false,
- (struct bfd_link_hash_entry **) & myh);
+ BSF_LOCAL, s, val, NULL, TRUE, FALSE, &bh);
+
+ free (tmp_name);
- free (tmp_name);
-
globals->thumb_glue_size += THUMB2ARM_GLUE_SIZE;
return;
}
+#endif /* not ARM_WINCE */
/* Select a BFD to be used to hold the sections used by the glue code.
This function is called from the linker scripts in ld/emultempl/
{armcoff/pe}.em */
-boolean
+bfd_boolean
bfd_arm_get_bfd_for_interworking (abfd, info)
bfd * abfd;
struct bfd_link_info * info;
struct coff_arm_link_hash_table * globals;
flagword flags;
asection * sec;
-
+
/* If we are only performing a partial link do not bother
getting a bfd to hold the glue. */
- if (info->relocateable)
- return true;
-
+ if (info->relocatable)
+ return TRUE;
+
globals = coff_arm_hash_table (info);
-
+
BFD_ASSERT (globals != NULL);
if (globals->bfd_of_glue_owner != NULL)
- return true;
-
+ return TRUE;
+
sec = bfd_get_section_by_name (abfd, ARM2THUMB_GLUE_SECTION_NAME);
-
- if (sec == NULL)
+
+ if (sec == NULL)
{
flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_CODE | SEC_READONLY;
-
+
sec = bfd_make_section (abfd, ARM2THUMB_GLUE_SECTION_NAME);
-
+
if (sec == NULL
|| ! bfd_set_section_flags (abfd, sec, flags)
|| ! bfd_set_section_alignment (abfd, sec, 2))
- return false;
+ return FALSE;
}
sec = bfd_get_section_by_name (abfd, THUMB2ARM_GLUE_SECTION_NAME);
- if (sec == NULL)
+ if (sec == NULL)
{
flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_CODE | SEC_READONLY;
-
+
sec = bfd_make_section (abfd, THUMB2ARM_GLUE_SECTION_NAME);
-
+
if (sec == NULL
|| ! bfd_set_section_flags (abfd, sec, flags)
|| ! bfd_set_section_alignment (abfd, sec, 2))
- return false;
+ return FALSE;
}
-
+
/* Save the bfd for later use. */
globals->bfd_of_glue_owner = abfd;
-
- return true;
+
+ return TRUE;
}
-boolean
+bfd_boolean
bfd_arm_process_before_allocation (abfd, info, support_old_code)
bfd * abfd;
struct bfd_link_info * info;
/* If we are only performing a partial link do not bother
to construct any glue. */
- if (info->relocateable)
- return true;
-
+ if (info->relocatable)
+ return TRUE;
+
/* Here we have a bfd that is to be included on the link. We have a hook
to do reloc rummaging, before section sizes are nailed down. */
_bfd_coff_get_external_symbols (abfd);
globals = coff_arm_hash_table (info);
-
+
BFD_ASSERT (globals != NULL);
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
globals->support_old_code = support_old_code;
-
+
/* Rummage around all the relocs and map the glue vectors. */
sec = abfd->sections;
if (sec == NULL)
- return true;
+ return TRUE;
for (; sec != NULL; sec = sec->next)
{
struct internal_reloc * i;
struct internal_reloc * rel;
- if (sec->reloc_count == 0)
+ if (sec->reloc_count == 0)
continue;
/* Load the relocs. */
- /* FIXME: there may be a storage leak here. */
-
+ /* FIXME: there may be a storage leak here. */
+
i = _bfd_coff_read_internal_relocs (abfd, sec, 1, 0, 0, 0);
-
+
BFD_ASSERT (i != 0);
- for (rel = i; rel < i + sec->reloc_count; ++rel)
+ for (rel = i; rel < i + sec->reloc_count; ++rel)
{
unsigned short r_type = rel->r_type;
- unsigned long symndx;
+ long symndx;
struct coff_link_hash_entry * h;
symndx = rel->r_symndx;
- /* If the relocation is not against a symbol it cannot concern us. */
+ /* If the relocation is not against a symbol it cannot concern us. */
if (symndx == -1)
continue;
+ /* If the index is outside of the range of our table, something has gone wrong. */
if (symndx >= obj_conv_table_size (abfd))
{
_bfd_error_handler (_("%s: illegal symbol index in reloc: %d"),
- bfd_get_filename (abfd), symndx);
+ bfd_archive_filename (abfd), symndx);
continue;
}
-
+
h = obj_coff_sym_hashes (abfd)[symndx];
/* If the relocation is against a static symbol it must be within
/* This one is a call from arm code. We need to look up
the target of the call. If it is a thumb target, we
insert glue. */
-
+
if (h->class == C_THUMBEXTFUNC)
record_arm_to_thumb_glue (info, h);
break;
-
+
+#ifndef ARM_WINCE
case ARM_THUMB23:
/* This one is a call from thumb code. We used to look
for ARM_THUMB9 and ARM_THUMB12 as well. We need to look
;
}
break;
-
+#endif
+
default:
break;
}
}
}
- return true;
+ return TRUE;
}
#endif /* ! defined (COFF_IMAGE_WITH_PE) */
#define coff_bfd_copy_private_bfd_data coff_arm_copy_private_bfd_data
#define coff_bfd_link_hash_table_create coff_arm_link_hash_table_create
-
-/* When doing a relocateable link, we want to convert ARM26 relocs
+/* When doing a relocatable link, we want to convert ARM26 relocs
into ARM26D relocs. */
-static boolean
+static bfd_boolean
coff_arm_adjust_symndx (obfd, info, ibfd, sec, irel, adjustedp)
bfd *obfd ATTRIBUTE_UNUSED;
struct bfd_link_info *info ATTRIBUTE_UNUSED;
bfd *ibfd;
asection *sec;
struct internal_reloc *irel;
- boolean *adjustedp;
+ bfd_boolean *adjustedp;
{
if (irel->r_type == 3)
{
&& h->root.u.def.section->output_section == sec->output_section)
irel->r_type = 7;
}
- *adjustedp = false;
- return true;
+ *adjustedp = FALSE;
+ return TRUE;
}
/* Called when merging the private data areas of two BFDs.
attempting to merge binaries compiled for different ARM
targets, eg different CPUs or differents APCS's. */
-static boolean
+static bfd_boolean
coff_arm_merge_private_bfd_data (ibfd, obfd)
bfd * ibfd;
bfd * obfd;
BFD_ASSERT (ibfd != NULL && obfd != NULL);
if (ibfd == obfd)
- return true;
+ return TRUE;
/* If the two formats are different we cannot merge anything.
This is not an error, since it is permissable to change the
input and output formats. */
if ( ibfd->xvec->flavour != bfd_target_coff_flavour
|| obfd->xvec->flavour != bfd_target_coff_flavour)
- return true;
+ return TRUE;
- /* Verify that the APCS is the same for the two BFDs */
+ /* Determine what should happen if the input ARM architecture
+ does not match the output ARM architecture. */
+ if (! bfd_arm_merge_machines (ibfd, obfd))
+ return FALSE;
+
+ /* Verify that the APCS is the same for the two BFDs. */
if (APCS_SET (ibfd))
{
if (APCS_SET (obfd))
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%s: ERROR: compiled for APCS-%d whereas target %s uses APCS-%d"),
- bfd_get_filename (ibfd), APCS_26_FLAG (ibfd) ? 26 : 32,
+ (_("ERROR: %s is compiled for APCS-%d, whereas %s is compiled for APCS-%d"),
+ bfd_archive_filename (ibfd), APCS_26_FLAG (ibfd) ? 26 : 32,
bfd_get_filename (obfd), APCS_26_FLAG (obfd) ? 26 : 32
);
bfd_set_error (bfd_error_wrong_format);
- return false;
+ return FALSE;
}
-
+
if (APCS_FLOAT_FLAG (obfd) != APCS_FLOAT_FLAG (ibfd))
{
const char *msg;
if (APCS_FLOAT_FLAG (ibfd))
/* xgettext: c-format */
- msg = _("%s: ERROR: passes floats in float registers whereas target %s uses integer registers");
+ msg = _("ERROR: %s passes floats in float registers, whereas %s passes them in integer registers");
else
/* xgettext: c-format */
- msg = _("%s: ERROR: passes floats in integer registers whereas target %s uses float registers");
-
- _bfd_error_handler (msg, bfd_get_filename (ibfd),
+ msg = _("ERROR: %s passes floats in integer registers, whereas %s passes them in float registers");
+
+ _bfd_error_handler (msg, bfd_archive_filename (ibfd),
bfd_get_filename (obfd));
bfd_set_error (bfd_error_wrong_format);
- return false;
+ return FALSE;
}
-
+
if (PIC_FLAG (obfd) != PIC_FLAG (ibfd))
{
const char * msg;
if (PIC_FLAG (ibfd))
/* xgettext: c-format */
- msg = _("%s: ERROR: compiled as position independent code, whereas target %s is absolute position");
+ msg = _("ERROR: %s is compiled as position independent code, whereas target %s is absolute position");
else
/* xgettext: c-format */
- msg = _("%s: ERROR: compiled as absolute position code, whereas target %s is position independent");
- _bfd_error_handler (msg, bfd_get_filename (ibfd),
+ msg = _("ERROR: %s is compiled as absolute position code, whereas target %s is position independent");
+ _bfd_error_handler (msg, bfd_archive_filename (ibfd),
bfd_get_filename (obfd));
bfd_set_error (bfd_error_wrong_format);
- return false;
+ return FALSE;
}
}
else
{
SET_APCS_FLAGS (obfd, APCS_26_FLAG (ibfd) | APCS_FLOAT_FLAG (ibfd) | PIC_FLAG (ibfd));
-
+
/* Set up the arch and fields as well as these are probably wrong. */
bfd_set_arch_mach (obfd, bfd_get_arch (ibfd), bfd_get_mach (ibfd));
}
if (INTERWORK_FLAG (ibfd))
/* xgettext: c-format */
- msg = _("Warning: input file %s supports interworking, whereas %s does not.");
+ msg = _("Warning: %s supports interworking, whereas %s does not");
else
/* xgettext: c-format */
- msg = _("Warning: input file %s does not support interworking, whereas %s does.");
-
- _bfd_error_handler (msg, bfd_get_filename (ibfd),
+ msg = _("Warning: %s does not support interworking, whereas %s does");
+
+ _bfd_error_handler (msg, bfd_archive_filename (ibfd),
bfd_get_filename (obfd));
}
}
}
}
- return true;
+ return TRUE;
}
-
/* Display the flags field. */
-static boolean
+static bfd_boolean
coff_arm_print_private_bfd_data (abfd, ptr)
bfd * abfd;
PTR ptr;
{
FILE * file = (FILE *) ptr;
-
+
BFD_ASSERT (abfd != NULL && ptr != NULL);
-
+
/* xgettext:c-format */
fprintf (file, _("private flags = %x:"), coff_data (abfd)->flags);
-
+
if (APCS_SET (abfd))
{
/* xgettext: APCS is ARM Prodecure Call Standard, it should not be translated. */
else
fprintf (file, _(" [absolute position]"));
}
-
+
if (! INTERWORK_SET (abfd))
fprintf (file, _(" [interworking flag not initialised]"));
else if (INTERWORK_FLAG (abfd))
fprintf (file, _(" [interworking supported]"));
else
fprintf (file, _(" [interworking not supported]"));
-
+
fputc ('\n', file);
-
- return true;
-}
+ return TRUE;
+}
/* Copies the given flags into the coff_tdata.flags field.
Typically these flags come from the f_flags[] field of
Note: Although this function is static, it is explicitly
called from both coffcode.h and peicode.h. */
-static boolean
+static bfd_boolean
_bfd_coff_arm_set_private_flags (abfd, flags)
bfd * abfd;
flagword flags;
BFD_ASSERT (abfd != NULL);
flag = (flags & F_APCS26) ? F_APCS_26 : 0;
-
+
/* Make sure that the APCS field has not been initialised to the opposite
value. */
if (APCS_SET (abfd)
|| (APCS_FLOAT_FLAG (abfd) != (flags & F_APCS_FLOAT))
|| (PIC_FLAG (abfd) != (flags & F_PIC))
))
- return false;
+ return FALSE;
flag |= (flags & (F_APCS_FLOAT | F_PIC));
-
+
SET_APCS_FLAGS (abfd, flag);
flag = (flags & F_INTERWORK);
-
+
/* If the BFD has already had its interworking flag set, but it
is different from the value that we have been asked to set,
then assume that that merged code will not support interworking
{
if (flag)
/* xgettext: c-format */
- _bfd_error_handler (_("Warning: Not setting interworking flag of %s, since it has already been specified as non-interworking"),
- bfd_get_filename (abfd));
+ _bfd_error_handler (_("Warning: Not setting interworking flag of %s since it has already been specified as non-interworking"),
+ bfd_archive_filename (abfd));
else
/* xgettext: c-format */
_bfd_error_handler (_("Warning: Clearing the interworking flag of %s due to outside request"),
- bfd_get_filename (abfd));
+ bfd_archive_filename (abfd));
flag = 0;
}
SET_INTERWORK_FLAG (abfd, flag);
- return true;
+ return TRUE;
}
-
/* Copy the important parts of the target specific data
from one instance of a BFD to another. */
-static boolean
+static bfd_boolean
coff_arm_copy_private_bfd_data (src, dest)
bfd * src;
bfd * dest;
{
BFD_ASSERT (src != NULL && dest != NULL);
-
+
if (src == dest)
- return true;
+ return TRUE;
/* If the destination is not in the same format as the source, do not do
the copy. */
if (src->xvec != dest->xvec)
- return true;
+ return TRUE;
/* copy the flags field */
if (APCS_SET (src))
{
/* If the src and dest have different APCS flag bits set, fail. */
if (APCS_26_FLAG (dest) != APCS_26_FLAG (src))
- return false;
-
+ return FALSE;
+
if (APCS_FLOAT_FLAG (dest) != APCS_FLOAT_FLAG (src))
- return false;
-
+ return FALSE;
+
if (PIC_FLAG (dest) != PIC_FLAG (src))
- return false;
+ return FALSE;
}
else
SET_APCS_FLAGS (dest, APCS_26_FLAG (src) | APCS_FLOAT_FLAG (src)
if (INTERWORK_FLAG (dest))
{
/* xgettext:c-format */
- _bfd_error_handler (("Warning: Clearing the interworking bit of %s, because the non-interworking code in %s has been copied into it"),
+ _bfd_error_handler (("\
+Warning: Clearing the interworking flag of %s because non-interworking code in %s has been linked with it"),
bfd_get_filename (dest),
- bfd_get_filename (src));
+ bfd_archive_filename (src));
}
-
+
SET_INTERWORK_FLAG (dest, 0);
}
}
}
}
- return true;
+ return TRUE;
}
/* Note: the definitions here of LOCAL_LABEL_PREFIX and USER_LABEL_PREIFX
- *must* match the definitions in gcc/config/arm/coff.h and semi.h */
-#define LOCAL_LABEL_PREFIX "."
+ *must* match the definitions in gcc/config/arm/{coff|semi|aout}.h. */
+#define LOCAL_LABEL_PREFIX ""
#ifndef USER_LABEL_PREFIX
#define USER_LABEL_PREFIX "_"
#endif
non-local.
b) Allow other prefixes than ".", e.g. an empty prefix would cause all
labels of the form Lxxx to be stripped. */
-static boolean
+static bfd_boolean
coff_arm_is_local_label_name (abfd, name)
bfd * abfd ATTRIBUTE_UNUSED;
const char * name;
if (USER_LABEL_PREFIX[0] != 0)
{
if (strncmp (name, USER_LABEL_PREFIX, strlen (USER_LABEL_PREFIX)) == 0)
- return false;
+ return FALSE;
}
#endif
#ifdef LOCAL_LABEL_PREFIX
/* If there is a prefix for local labels then look for this.
- If the prefix exists, but it is empty, then ignore the test. */
-
+ If the prefix exists, but it is empty, then ignore the test. */
+
if (LOCAL_LABEL_PREFIX[0] != 0)
{
- int len = strlen (LOCAL_LABEL_PREFIX);
-
+ size_t len = strlen (LOCAL_LABEL_PREFIX);
+
if (strncmp (name, LOCAL_LABEL_PREFIX, len) != 0)
- return false;
-
+ return FALSE;
+
/* Perform the checks below for the rest of the name. */
name += len;
}
#endif
-
+
return name[0] == 'L';
}
/* This piece of machinery exists only to guarantee that the bfd that holds
- the glue section is written last.
+ the glue section is written last.
This does depend on bfd_make_section attaching a new section to the
- end of the section list for the bfd.
+ end of the section list for the bfd.
krk@cygnus.com */
-static boolean
+static bfd_boolean
coff_arm_link_output_has_begun (sub, info)
bfd * sub;
struct coff_final_link_info * info;
|| sub == coff_arm_hash_table (info->info)->bfd_of_glue_owner);
}
-static boolean
+static bfd_boolean
coff_arm_final_link_postscript (abfd, pfinfo)
bfd * abfd ATTRIBUTE_UNUSED;
struct coff_final_link_info * pfinfo;
struct coff_arm_link_hash_table * globals;
globals = coff_arm_hash_table (pfinfo->info);
-
+
BFD_ASSERT (globals != NULL);
-
+
if (globals->bfd_of_glue_owner != NULL)
{
if (! _bfd_coff_link_input_bfd (pfinfo, globals->bfd_of_glue_owner))
- return false;
-
- globals->bfd_of_glue_owner->output_has_begun = true;
- }
-
- return true;
-}
-
-#if 0
-#define coff_SWAP_sym_in arm_bfd_coff_swap_sym_in
-
-static void coff_swap_sym_in PARAMS ((bfd *, PTR, PTR));
-
-/* Sepcial version of symbol swapper, used to grab a bfd
- onto which the glue sections can be attached. */
-static void
-arm_bfd_coff_swap_sym_in (abfd, ext1, in1)
- bfd * abfd;
- PTR ext1;
- PTR in1;
-{
- flagword flags;
- register asection * s;
-
- /* Do the normal swap in. */
- coff_swap_sym_in (abfd, ext1, in1);
-
- if (bfd_of_glue_owner != NULL) /* we already have a toc, so go home */
- return;
-
- /* Save the bfd for later allocation. */
- bfd_of_glue_owner = abfd;
+ return FALSE;
- s = bfd_get_section_by_name (bfd_of_glue_owner ,
- ARM2THUMB_GLUE_SECTION_NAME);
-
- if (s == NULL)
- {
- flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY ;
-
- s = bfd_make_section (bfd_of_glue_owner, ARM2THUMB_GLUE_SECTION_NAME);
-
- if (s == NULL
- || !bfd_set_section_flags (bfd_of_glue_owner, s, flags)
- || !bfd_set_section_alignment (bfd_of_glue_owner, s, 2))
- {
- /* FIXME: set appropriate bfd error */
- abort();
- }
+ globals->bfd_of_glue_owner->output_has_begun = TRUE;
}
- s = bfd_get_section_by_name (bfd_of_glue_owner, THUMB2ARM_GLUE_SECTION_NAME);
-
- if (s == NULL)
- {
- flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY ;
-
- s = bfd_make_section (bfd_of_glue_owner, THUMB2ARM_GLUE_SECTION_NAME);
-
- if (s == NULL
- || !bfd_set_section_flags (bfd_of_glue_owner, s, flags)
- || !bfd_set_section_alignment (bfd_of_glue_owner, s, 2))
- {
- /* FIXME: set appropriate bfd error krk@cygnus.com */
- abort();
- }
- }
-
- return;
+ return bfd_arm_update_notes (abfd, ARM_NOTE_SECTION);
}
-#endif
#include "coffcode.h"
#define TARGET_UNDERSCORE 0
#endif
+#ifndef EXTRA_S_FLAGS
#ifdef COFF_WITH_PE
#define EXTRA_S_FLAGS (SEC_LINK_ONCE | SEC_LINK_DUPLICATES)
#else
#define EXTRA_S_FLAGS 0
#endif
+#endif
/* Forward declaration for use initialising alternative_target field. */
extern const bfd_target TARGET_BIG_SYM ;
/* Target vectors. */
-CREATE_LITTLE_COFF_TARGET_VEC (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, D_PAGED, EXTRA_S_FLAGS, TARGET_UNDERSCORE, & TARGET_BIG_SYM)
-CREATE_BIG_COFF_TARGET_VEC (TARGET_BIG_SYM, TARGET_BIG_NAME, D_PAGED, EXTRA_S_FLAGS, TARGET_UNDERSCORE, & TARGET_LITTLE_SYM)
-
+CREATE_LITTLE_COFF_TARGET_VEC (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME, D_PAGED, EXTRA_S_FLAGS, TARGET_UNDERSCORE, & TARGET_BIG_SYM, COFF_SWAP_TABLE)
+CREATE_BIG_COFF_TARGET_VEC (TARGET_BIG_SYM, TARGET_BIG_NAME, D_PAGED, EXTRA_S_FLAGS, TARGET_UNDERSCORE, & TARGET_LITTLE_SYM, COFF_SWAP_TABLE)