-/* BFD back-end for Hitachi H8/300 COFF binaries.
- Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+/* BFD back-end for Renesas H8/300 COFF binaries.
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2012
Free Software Foundation, Inc.
Written by Steve Chamberlain, <sac@cygnus.com>.
-This file is part of BFD, the Binary File Descriptor library.
+ This file is part of BFD, the Binary File Descriptor library.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
-#include "bfd.h"
#include "sysdep.h"
+#include "bfd.h"
#include "libbfd.h"
#include "bfdlink.h"
#include "genlink.h"
#include "coff/h8300.h"
#include "coff/internal.h"
#include "libcoff.h"
+#include "libiberty.h"
#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER (1)
/* We derive a hash table from the basic BFD hash table to
- hold entries in the function vector. Aside from the
+ hold entries in the function vector. Aside from the
info stored by the basic hash table, we need the offset
of a particular entry within the hash table as well as
the offset where we'll add the next entry. */
struct funcvec_hash_entry
-{
- /* The basic hash table entry. */
- struct bfd_hash_entry root;
+ {
+ /* The basic hash table entry. */
+ struct bfd_hash_entry root;
- /* The offset within the vectors section where
- this entry lives. */
- bfd_vma offset;
-};
+ /* The offset within the vectors section where
+ this entry lives. */
+ bfd_vma offset;
+ };
struct funcvec_hash_table
-{
- /* The basic hash table. */
- struct bfd_hash_table root;
-
- bfd *abfd;
+ {
+ /* The basic hash table. */
+ struct bfd_hash_table root;
- /* Offset at which we'll add the next entry. */
- unsigned int offset;
-};
+ bfd *abfd;
-static struct bfd_hash_entry *
-funcvec_hash_newfunc
- PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *, const char *));
+ /* Offset at which we'll add the next entry. */
+ unsigned int offset;
+ };
-static boolean
-funcvec_hash_table_init
- PARAMS ((struct funcvec_hash_table *, bfd *,
- struct bfd_hash_entry *(*) PARAMS ((struct bfd_hash_entry *,
- struct bfd_hash_table *,
- const char *))));
/* To lookup a value in the function vector hash table. */
#define funcvec_hash_lookup(table, string, create, copy) \
the generic linker hash table, not the COFF backend linker hash
table! We use this to attach additional data structures we
need while linking on the h8300. */
-struct h8300_coff_link_hash_table
-{
+struct h8300_coff_link_hash_table {
/* The main hash table. */
struct generic_link_hash_table root;
struct funcvec_hash_table *funcvec_hash_table;
};
-static struct bfd_link_hash_table *h8300_coff_link_hash_table_create
- PARAMS ((bfd *));
+static struct bfd_link_hash_table *h8300_coff_link_hash_table_create (bfd *);
/* Get the H8/300 COFF linker hash table from a link_info structure. */
a new entry is added to the funcvec hash table. */
static struct bfd_hash_entry *
-funcvec_hash_newfunc (entry, gen_table, string)
- struct bfd_hash_entry *entry;
- struct bfd_hash_table *gen_table;
- const char *string;
+funcvec_hash_newfunc (struct bfd_hash_entry *entry,
+ struct bfd_hash_table *gen_table,
+ const char *string)
{
struct funcvec_hash_entry *ret;
struct funcvec_hash_table *table;
subclass. */
if (ret == NULL)
ret = ((struct funcvec_hash_entry *)
- bfd_hash_allocate (gen_table,
- sizeof (struct funcvec_hash_entry)));
+ bfd_hash_allocate (gen_table,
+ sizeof (struct funcvec_hash_entry)));
if (ret == NULL)
return NULL;
/* Call the allocation method of the superclass. */
ret = ((struct funcvec_hash_entry *)
- bfd_hash_newfunc ((struct bfd_hash_entry *) ret, gen_table, string));
+ bfd_hash_newfunc ((struct bfd_hash_entry *) ret, gen_table, string));
if (ret == NULL)
return NULL;
/* Bump the offset at which we store entries in the function
vector. We'd like to bump up the size of the vectors section,
but it's not easily available here. */
- if (bfd_get_mach (table->abfd) == bfd_mach_h8300)
- table->offset += 2;
- else if (bfd_get_mach (table->abfd) == bfd_mach_h8300h
- || bfd_get_mach (table->abfd) == bfd_mach_h8300s)
- table->offset += 4;
- else
- return NULL;
+ switch (bfd_get_mach (table->abfd))
+ {
+ case bfd_mach_h8300:
+ case bfd_mach_h8300hn:
+ case bfd_mach_h8300sn:
+ table->offset += 2;
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300s:
+ table->offset += 4;
+ break;
+ default:
+ return NULL;
+ }
/* Everything went OK. */
return (struct bfd_hash_entry *) ret;
/* Initialize the function vector hash table. */
-static boolean
-funcvec_hash_table_init (table, abfd, newfunc)
- struct funcvec_hash_table *table;
- bfd *abfd;
- struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *,
- struct bfd_hash_table *,
- const char *));
+static bfd_boolean
+funcvec_hash_table_init (struct funcvec_hash_table *table,
+ bfd *abfd,
+ struct bfd_hash_entry *(*newfunc)
+ (struct bfd_hash_entry *,
+ struct bfd_hash_table *,
+ const char *),
+ unsigned int entsize)
{
/* Initialize our local fields, then call the generic initialization
routine. */
table->offset = 0;
table->abfd = abfd;
- return (bfd_hash_table_init (&table->root, newfunc));
+ return (bfd_hash_table_init (&table->root, newfunc, entsize));
}
/* Create the derived linker hash table. We use a derived hash table
- basically to hold "static" information during an h8/300 coff link
+ basically to hold "static" information during an H8/300 coff link
without using static variables. */
static struct bfd_link_hash_table *
-h8300_coff_link_hash_table_create (abfd)
- bfd *abfd;
+h8300_coff_link_hash_table_create (bfd *abfd)
{
struct h8300_coff_link_hash_table *ret;
- ret = ((struct h8300_coff_link_hash_table *)
- bfd_alloc (abfd, sizeof (struct h8300_coff_link_hash_table)));
+ bfd_size_type amt = sizeof (struct h8300_coff_link_hash_table);
+
+ ret = (struct h8300_coff_link_hash_table *) bfd_zmalloc (amt);
if (ret == NULL)
return NULL;
- if (!_bfd_link_hash_table_init (&ret->root.root, abfd, _bfd_generic_link_hash_newfunc))
+ if (!_bfd_link_hash_table_init (&ret->root.root, abfd,
+ _bfd_generic_link_hash_newfunc,
+ sizeof (struct generic_link_hash_entry)))
{
- bfd_release (abfd, ret);
+ free (ret);
return NULL;
}
- /* Initialize our data. */
- ret->vectors_sec = NULL;
- ret->funcvec_hash_table = NULL;
-
- /* OK. Everything's intialized, return the base pointer. */
return &ret->root.root;
}
We only come here for pcrel stuff and return normally if not an -r link.
When doing -r, we can't do any arithmetic for the pcrel stuff, because
the code in reloc.c assumes that we can manipulate the targets of
- the pcrel branches. This isn't so, since the H8/300 can do relaxing,
+ the pcrel branches. This isn't so, since the H8/300 can do relaxing,
which means that the gap after the instruction may not be enough to
contain the offset required for the branch, so we have to use only
the addend until the final link. */
static bfd_reloc_status_type
-special (abfd, reloc_entry, symbol, data, input_section, output_bfd,
- error_message)
- bfd *abfd ATTRIBUTE_UNUSED;
- arelent *reloc_entry ATTRIBUTE_UNUSED;
- asymbol *symbol ATTRIBUTE_UNUSED;
- PTR data ATTRIBUTE_UNUSED;
- asection *input_section ATTRIBUTE_UNUSED;
- bfd *output_bfd;
- char **error_message ATTRIBUTE_UNUSED;
+special (bfd * abfd ATTRIBUTE_UNUSED,
+ arelent * reloc_entry ATTRIBUTE_UNUSED,
+ asymbol * symbol ATTRIBUTE_UNUSED,
+ void * data ATTRIBUTE_UNUSED,
+ asection * input_section ATTRIBUTE_UNUSED,
+ bfd * output_bfd,
+ char ** error_message ATTRIBUTE_UNUSED)
{
if (output_bfd == (bfd *) NULL)
return bfd_reloc_continue;
static reloc_howto_type howto_table[] =
{
- HOWTO (R_RELBYTE, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "8", false, 0x000000ff, 0x000000ff, false),
- HOWTO (R_RELWORD, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_RELLONG, 0, 2, 32, false, 0, complain_overflow_bitfield, special, "32", false, 0xffffffff, 0xffffffff, false),
- HOWTO (R_PCRBYTE, 0, 0, 8, true, 0, complain_overflow_signed, special, "DISP8", false, 0x000000ff, 0x000000ff, true),
- HOWTO (R_PCRWORD, 0, 1, 16, true, 0, complain_overflow_signed, special, "DISP16", false, 0x0000ffff, 0x0000ffff, true),
- HOWTO (R_PCRLONG, 0, 2, 32, true, 0, complain_overflow_signed, special, "DISP32", false, 0xffffffff, 0xffffffff, true),
- HOWTO (R_MOV16B1, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "relaxable mov.b:16", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_MOV16B2, 0, 1, 8, false, 0, complain_overflow_bitfield, special, "relaxed mov.b:16", false, 0x000000ff, 0x000000ff, false),
- HOWTO (R_JMP1, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "16/pcrel", false, 0x0000ffff, 0x0000ffff, false),
- HOWTO (R_JMP2, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "pcrecl/16", false, 0x000000ff, 0x000000ff, false),
- HOWTO (R_JMPL1, 0, 2, 32, false, 0, complain_overflow_bitfield, special, "24/pcrell", false, 0x00ffffff, 0x00ffffff, false),
- HOWTO (R_JMPL2, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "pc8/24", false, 0x000000ff, 0x000000ff, false),
- HOWTO (R_MOV24B1, 0, 1, 32, false, 0, complain_overflow_bitfield, special, "relaxable mov.b:24", false, 0xffffffff, 0xffffffff, false),
- HOWTO (R_MOV24B2, 0, 1, 8, false, 0, complain_overflow_bitfield, special, "relaxed mov.b:24", false, 0x0000ffff, 0x0000ffff, false),
+ HOWTO (R_RELBYTE, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_RELWORD, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+ HOWTO (R_RELLONG, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "32", FALSE, 0xffffffff, 0xffffffff, FALSE),
+ HOWTO (R_PCRBYTE, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8", FALSE, 0x000000ff, 0x000000ff, TRUE),
+ HOWTO (R_PCRWORD, 0, 1, 16, TRUE, 0, complain_overflow_signed, special, "DISP16", FALSE, 0x0000ffff, 0x0000ffff, TRUE),
+ HOWTO (R_PCRLONG, 0, 2, 32, TRUE, 0, complain_overflow_signed, special, "DISP32", FALSE, 0xffffffff, 0xffffffff, TRUE),
+ HOWTO (R_MOV16B1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:16", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+ HOWTO (R_MOV16B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:16", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_JMP1, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "16/pcrel", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
+ HOWTO (R_JMP2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pcrecl/16", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_JMPL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield, special, "24/pcrell", FALSE, 0x00ffffff, 0x00ffffff, FALSE),
+ HOWTO (R_JMPL2, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "pc8/24", FALSE, 0x000000ff, 0x000000ff, FALSE),
+ HOWTO (R_MOV24B1, 0, 1, 32, FALSE, 0, complain_overflow_bitfield, special, "relaxable mov.b:24", FALSE, 0xffffffff, 0xffffffff, FALSE),
+ HOWTO (R_MOV24B2, 0, 1, 8, FALSE, 0, complain_overflow_bitfield, special, "relaxed mov.b:24", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
/* An indirect reference to a function. This causes the function's address
to be added to the function vector in lo-mem and puts the address of
the function vector's entry in the jsr instruction. */
- HOWTO (R_MEM_INDIRECT, 0, 0, 8, false, 0, complain_overflow_bitfield, special, "8/indirect", false, 0x000000ff, 0x000000ff, false),
+ HOWTO (R_MEM_INDIRECT, 0, 0, 8, FALSE, 0, complain_overflow_bitfield, special, "8/indirect", FALSE, 0x000000ff, 0x000000ff, FALSE),
- /* Internal reloc for relaxing. This is created when a 16bit pc-relative
- branch is turned into an 8bit pc-relative branch. */
- HOWTO (R_PCRWORD_B, 0, 0, 8, true, 0, complain_overflow_bitfield, special, "relaxed bCC:16", false, 0x000000ff, 0x000000ff, false),
+ /* Internal reloc for relaxing. This is created when a 16-bit pc-relative
+ branch is turned into an 8-bit pc-relative branch. */
+ HOWTO (R_PCRWORD_B, 0, 0, 8, TRUE, 0, complain_overflow_bitfield, special, "relaxed bCC:16", FALSE, 0x000000ff, 0x000000ff, FALSE),
- HOWTO (R_MOVL1, 0, 2, 32, false, 0, complain_overflow_bitfield,special, "32/24 relaxable move", false, 0xffffffff, 0xffffffff, false),
+ HOWTO (R_MOVL1, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,special, "32/24 relaxable move", FALSE, 0xffffffff, 0xffffffff, FALSE),
- HOWTO (R_MOVL2, 0, 1, 16, false, 0, complain_overflow_bitfield, special, "32/24 relaxed move", false, 0x0000ffff, 0x0000ffff, false),
+ HOWTO (R_MOVL2, 0, 1, 16, FALSE, 0, complain_overflow_bitfield, special, "32/24 relaxed move", FALSE, 0x0000ffff, 0x0000ffff, FALSE),
- HOWTO (R_BCC_INV, 0, 0, 8, true, 0, complain_overflow_signed, special, "DISP8 inverted", false, 0x000000ff, 0x000000ff, true),
+ HOWTO (R_BCC_INV, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "DISP8 inverted", FALSE, 0x000000ff, 0x000000ff, TRUE),
- HOWTO (R_JMP_DEL, 0, 0, 8, true, 0, complain_overflow_signed, special, "Deleted jump", false, 0x000000ff, 0x000000ff, true),
+ HOWTO (R_JMP_DEL, 0, 0, 8, TRUE, 0, complain_overflow_signed, special, "Deleted jump", FALSE, 0x000000ff, 0x000000ff, TRUE),
};
/* Turn a howto into a reloc number. */
#define SELECT_RELOC(x,howto) \
- { x.r_type = select_reloc(howto); }
+ { x.r_type = select_reloc (howto); }
-#define BADMAG(x) (H8300BADMAG(x) && H8300HBADMAG(x) && H8300SBADMAG(x))
-#define H8300 1 /* Customize coffcode.h */
+#define BADMAG(x) (H8300BADMAG (x) && H8300HBADMAG (x) && H8300SBADMAG (x) \
+ && H8300HNBADMAG(x) && H8300SNBADMAG(x))
+#define H8300 1 /* Customize coffcode.h */
#define __A_MAGIC_SET__
/* Code to swap in the reloc. */
-#define SWAP_IN_RELOC_OFFSET bfd_h_get_32
-#define SWAP_OUT_RELOC_OFFSET bfd_h_put_32
+#define SWAP_IN_RELOC_OFFSET H_GET_32
+#define SWAP_OUT_RELOC_OFFSET H_PUT_32
#define SWAP_OUT_RELOC_EXTRA(abfd, src, dst) \
dst->r_stuff[0] = 'S'; \
dst->r_stuff[1] = 'C';
static int
-select_reloc (howto)
- reloc_howto_type *howto;
+select_reloc (reloc_howto_type *howto)
{
return howto->type;
}
/* Code to turn a r_type into a howto ptr, uses the above howto table. */
static void
-rtype2howto (internal, dst)
- arelent *internal;
- struct internal_reloc *dst;
+rtype2howto (arelent *internal, struct internal_reloc *dst)
{
switch (dst->r_type)
{
}
}
-#define RTYPE2HOWTO(internal, relocentry) rtype2howto(internal,relocentry)
+#define RTYPE2HOWTO(internal, relocentry) rtype2howto (internal, relocentry)
/* Perform any necessary magic to the addend in a reloc entry. */
#define CALC_ADDEND(abfd, symbol, ext_reloc, cache_ptr) \
- cache_ptr->addend = ext_reloc.r_offset;
+ cache_ptr->addend = ext_reloc.r_offset;
#define RELOC_PROCESSING(relent,reloc,symbols,abfd,section) \
- reloc_processing(relent, reloc, symbols, abfd, section)
+ reloc_processing (relent, reloc, symbols, abfd, section)
static void
-reloc_processing (relent, reloc, symbols, abfd, section)
- arelent *relent;
- struct internal_reloc *reloc;
- asymbol **symbols;
- bfd *abfd;
- asection *section;
+reloc_processing (arelent *relent, struct internal_reloc *reloc,
+ asymbol **symbols, bfd *abfd, asection *section)
{
relent->address = reloc->r_vaddr;
rtype2howto (relent, reloc);
if (((int) reloc->r_symndx) > 0)
- {
- relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
- }
+ relent->sym_ptr_ptr = symbols + obj_convert (abfd)[reloc->r_symndx];
else
- {
- relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
- }
+ relent->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
relent->addend = reloc->r_offset;
-
relent->address -= section->vma;
-#if 0
- relent->section = 0;
-#endif
}
-static boolean
-h8300_symbol_address_p (abfd, input_section, address)
- bfd *abfd;
- asection *input_section;
- bfd_vma address;
+static bfd_boolean
+h8300_symbol_address_p (bfd *abfd, asection *input_section, bfd_vma address)
{
asymbol **s;
while (*s)
{
asymbol *p = *s;
+
if (p->section == input_section
&& (input_section->output_section->vma
+ input_section->output_offset
+ p->value) == address)
- return true;
+ return TRUE;
s++;
}
- return false;
+ return FALSE;
}
/* If RELOC represents a relaxable instruction/reloc, change it into
in the howto table. This needs to be fixed. */
static int
-h8300_reloc16_estimate (abfd, input_section, reloc, shrink, link_info)
- bfd *abfd;
- asection *input_section;
- arelent *reloc;
- unsigned int shrink;
- struct bfd_link_info *link_info;
+h8300_reloc16_estimate (bfd *abfd, asection *input_section, arelent *reloc,
+ unsigned int shrink, struct bfd_link_info *link_info)
{
bfd_vma value;
bfd_vma dot;
static asection *last_input_section = NULL;
static arelent *last_reloc = NULL;
- /* The address of the thing to be relocated will have moved back by
+ /* The address of the thing to be relocated will have moved back by
the size of the shrink - but we don't change reloc->address here,
since we need it to know where the relocation lives in the source
uncooked section. */
/* Only examine the relocs which might be relaxable. */
switch (reloc->howto->type)
- {
- /* This is the 16/24 bit absolute branch which could become an 8 bit
- pc-relative branch. */
+ {
+ /* This is the 16-/24-bit absolute branch which could become an
+ 8-bit pc-relative branch. */
case R_JMP1:
case R_JMPL1:
/* Get the address of the target of this branch. */
/* If the distance is within -128..+128 inclusive, then we can relax
this jump. +128 is valid since the target will move two bytes
closer if we do relax this branch. */
- if ((int)gap >= -128 && (int)gap <= 128 )
- {
+ if ((int) gap >= -128 && (int) gap <= 128)
+ {
+ bfd_byte code;
+
+ if (!bfd_get_section_contents (abfd, input_section, & code,
+ reloc->address, 1))
+ break;
+ code = bfd_get_8 (abfd, & code);
+
/* It's possible we may be able to eliminate this branch entirely;
if the previous instruction is a branch around this instruction,
and there's no label at this instruction, then we can reverse
bCC lab1 bCC' lab2
jmp lab2
lab1: lab1:
-
- This saves 4 bytes instead of two, and should be relatively
- common. */
- if (gap <= 126
+ This saves 4 bytes instead of two, and should be relatively
+ common.
+
+ Only perform this optimisation for jumps (code 0x5a) not
+ subroutine calls, as otherwise it could transform:
+
+ mov.w r0,r0
+ beq .L1
+ jsr @_bar
+ .L1: rts
+ _bar: rts
+ into:
+ mov.w r0,r0
+ bne _bar
+ rts
+ _bar: rts
+
+ which changes the call (jsr) into a branch (bne). */
+ if (code == 0x5a
+ && gap <= 126
&& last_reloc
&& last_reloc->howto->type == R_PCRBYTE)
{
}
break;
- /* This is the 16 bit pc-relative branch which could become an 8 bit
+ /* This is the 16-bit pc-relative branch which could become an 8-bit
pc-relative branch. */
case R_PCRWORD:
/* Get the address of the target of this branch, add one to the value
- because the addend field in PCrel jumps is off by -1. */
+ because the addend field in PCrel jumps is off by -1. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section) + 1;
/* Get the address of the next instruction if we were to relax. */
/* If the distance is within -128..+128 inclusive, then we can relax
this jump. +128 is valid since the target will move two bytes
closer if we do relax this branch. */
- if ((int)gap >= -128 && (int)gap <= 128 )
- {
+ if ((int) gap >= -128 && (int) gap <= 128)
+ {
/* Change the reloc type. */
reloc->howto = howto_table + 15;
}
break;
- /* This is a 16 bit absolute address in a mov.b insn, which can
- become an 8 bit absolute address if it's in the right range. */
+ /* This is a 16-bit absolute address in a mov.b insn, which can
+ become an 8-bit absolute address if it's in the right range. */
case R_MOV16B1:
/* Get the address of the data referenced by this mov.b insn. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
- /* The address is in 0xff00..0xffff inclusive on the h8300 or
- 0xffff00..0xffffff inclusive on the h8300h, then we can
- relax this mov.b */
- if ((bfd_get_mach (abfd) == bfd_mach_h8300
- && value >= 0xff00
- && value <= 0xffff)
- || ((bfd_get_mach (abfd) == bfd_mach_h8300h
- || bfd_get_mach (abfd) == bfd_mach_h8300s)
- && value >= 0xffff00
- && value <= 0xffffff))
+ /* If the address is in the top 256 bytes of the address space
+ then we can relax this instruction. */
+ if (value >= 0xffffff00u)
{
/* Change the reloc type. */
reloc->howto = reloc->howto + 1;
}
break;
- /* Similarly for a 24 bit absolute address in a mov.b. Note that
- if we can't relax this into an 8 bit absolute, we'll fall through
- and try to relax it into a 16bit absolute. */
+ /* Similarly for a 24-bit absolute address in a mov.b. Note that
+ if we can't relax this into an 8-bit absolute, we'll fall through
+ and try to relax it into a 16-bit absolute. */
case R_MOV24B1:
/* Get the address of the data referenced by this mov.b insn. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
- /* The address is in 0xffff00..0xffffff inclusive on the h8300h,
- then we can relax this mov.b */
- if ((bfd_get_mach (abfd) == bfd_mach_h8300h
- || bfd_get_mach (abfd) == bfd_mach_h8300s)
- && value >= 0xffff00
- && value <= 0xffffff)
+ if (value >= 0xffffff00u)
{
/* Change the reloc type. */
reloc->howto = reloc->howto + 1;
break;
}
- /* FALLTHROUGH and try to turn the 32/24 bit reloc into a 16 bit
+ /* FALLTHROUGH and try to turn the 24-/32-bit reloc into a 16-bit
reloc. */
- /* This is a 24/32 bit absolute address in a mov insn, which can
- become an 16 bit absolute address if it's in the right range. */
+ /* This is a 24-/32-bit absolute address in a mov insn, which can
+ become an 16-bit absolute address if it's in the right range. */
case R_MOVL1:
/* Get the address of the data referenced by this mov insn. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
- /* If this address is in 0x0000..0x7fff inclusive or
- 0xff8000..0xffffff inclusive, then it can be relaxed. */
- if (value <= 0x7fff || value >= 0xff8000)
+ /* If the address is a sign-extended 16-bit value then we can
+ relax this instruction. */
+ if (value <= 0x7fff || value >= 0xffff8000u)
{
/* Change the reloc type. */
reloc->howto = howto_table + 17;
FIXME: Not all relocations check for overflow! */
static void
-h8300_reloc16_extra_cases (abfd, link_info, link_order, reloc, data, src_ptr,
- dst_ptr)
- bfd *abfd;
- struct bfd_link_info *link_info;
- struct bfd_link_order *link_order;
- arelent *reloc;
- bfd_byte *data;
- unsigned int *src_ptr;
- unsigned int *dst_ptr;
+h8300_reloc16_extra_cases (bfd *abfd, struct bfd_link_info *link_info,
+ struct bfd_link_order *link_order, arelent *reloc,
+ bfd_byte *data, unsigned int *src_ptr,
+ unsigned int *dst_ptr)
{
unsigned int src_address = *src_ptr;
unsigned int dst_address = *dst_ptr;
bfd_vma value;
bfd_vma dot;
int gap, tmp;
+ unsigned char temp_code;
switch (reloc->howto->type)
{
- /* Generic 8bit pc-relative relocation. */
+ /* Generic 8-bit pc-relative relocation. */
case R_PCRBYTE:
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- dot = (link_order->offset
+ dot = (input_section->output_offset
+ dst_address
+ link_order->u.indirect.section->output_section->vma);
if (gap < -128 || gap > 126)
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
/* Everything looks OK. Apply the relocation and update the
src/dst address appropriately. */
-
bfd_put_8 (abfd, gap, data + dst_address);
dst_address++;
src_address++;
/* All done. */
break;
- /* Generic 16bit pc-relative relocation. */
+ /* Generic 16-bit pc-relative relocation. */
case R_PCRWORD:
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
/* Get the address of the instruction (not the reloc). */
- dot = (link_order->offset
- + dst_address
+ dot = (input_section->output_offset
+ + dst_address
+ link_order->u.indirect.section->output_section->vma + 1);
gap = value - dot;
if (gap > 32766 || gap < -32768)
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
/* Everything looks OK. Apply the relocation and update the
src/dst address appropriately. */
-
- bfd_put_16 (abfd, gap, data + dst_address);
+ bfd_put_16 (abfd, (bfd_vma) gap, data + dst_address);
dst_address += 2;
src_address += 2;
/* All done. */
break;
- /* Generic 8bit absolute relocation. */
+ /* Generic 8-bit absolute relocation. */
case R_RELBYTE:
/* Get the address of the object referenced by this insn. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- /* Sanity check. */
- if (value <= 0xff
- || (value >= 0x0000ff00 && value <= 0x0000ffff)
- || (value >= 0x00ffff00 && value <= 0x00ffffff)
- || (value >= 0xffffff00 && value <= 0xffffffff))
- {
- /* Everything looks OK. Apply the relocation and update the
- src/dst address appropriately. */
-
- bfd_put_8 (abfd, value & 0xff, data + dst_address);
- dst_address += 1;
- src_address += 1;
- }
- else
- {
- if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
- reloc->howto->name, reloc->addend, input_section->owner,
- input_section, reloc->address)))
- abort ();
- }
+ bfd_put_8 (abfd, value & 0xff, data + dst_address);
+ dst_address += 1;
+ src_address += 1;
/* All done. */
break;
- /* Various simple 16bit absolute relocations. */
+ /* Various simple 16-bit absolute relocations. */
case R_MOV16B1:
case R_JMP1:
case R_RELWORD:
src_address += 2;
break;
- /* Various simple 24/32bit absolute relocations. */
+ /* Various simple 24-/32-bit absolute relocations. */
case R_MOV24B1:
case R_MOVL1:
case R_RELLONG:
src_address += 4;
break;
- /* Another 24/32bit absolute relocation. */
+ /* Another 24-/32-bit absolute relocation. */
case R_JMPL1:
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
src_address += 4;
break;
- /* A 16bit abolute relocation that was formerlly a 24/32bit
- absolute relocation. */
+ /* This is a 24-/32-bit absolute address in one of the following
+ instructions:
+
+ "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
+ "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", "ldc.w",
+ "stc.w" and "mov.[bwl]"
+
+ We may relax this into an 16-bit absolute address if it's in
+ the right range. */
case R_MOVL2:
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
+ value = bfd_h8300_pad_address (abfd, value);
/* Sanity check. */
- if (value <= 0x7fff || value >= 0xff8000)
+ if (value <= 0x7fff || value >= 0xffff8000u)
{
- /* Insert the 16bit value into the proper location. */
+ /* Insert the 16-bit value into the proper location. */
bfd_put_16 (abfd, value, data + dst_address);
- /* Fix the opcode. For all the move insns, we simply
- need to turn off bit 0x20 in the previous byte. */
- data[dst_address - 1] &= ~0x20;
+ /* Fix the opcode. For all the instructions that belong to
+ this relaxation, we simply need to turn off bit 0x20 in
+ the previous byte. */
+ data[dst_address - 1] &= ~0x20;
dst_address += 2;
src_address += 4;
}
else
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
- }
+ }
break;
- /* A 16bit absolute branch that is now an 8-bit pc-relative branch. */
+ /* A 16-bit absolute branch that is now an 8-bit pc-relative branch. */
case R_JMP2:
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
/* Get the address of the next instruction. */
- dot = (link_order->offset
+ dot = (input_section->output_offset
+ dst_address
+ link_order->u.indirect.section->output_section->vma + 1);
if (gap < -128 || gap > 126)
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
bfd_put_8 (abfd, 0x55, data + dst_address - 1);
break;
case 0x5a:
- /* jmp ->bra */
+ /* jmp -> bra */
bfd_put_8 (abfd, 0x40, data + dst_address - 1);
break;
abort ();
}
- /* Write out the 8bit value. */
+ /* Write out the 8-bit value. */
bfd_put_8 (abfd, gap, data + dst_address);
dst_address += 1;
break;
- /* A 16bit pc-relative branch that is now an 8-bit pc-relative branch. */
+ /* A 16-bit pc-relative branch that is now an 8-bit pc-relative branch. */
case R_PCRWORD_B:
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
/* Get the address of the instruction (not the reloc). */
- dot = (link_order->offset
+ dot = (input_section->output_offset
+ dst_address
+ link_order->u.indirect.section->output_section->vma - 1);
if (gap < -128 || gap > 126)
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
{
case 0x58:
/* bCC:16 -> bCC:8 */
- /* Get the condition code from the original insn. */
+ /* Get the second byte of the original insn, which contains
+ the condition code. */
tmp = data[dst_address - 1];
+
+ /* Compute the fisrt byte of the relaxed instruction. The
+ original sequence 0x58 0xX0 is relaxed to 0x4X, where X
+ represents the condition code. */
tmp &= 0xf0;
tmp >>= 4;
-
- /* Now or in the high nibble of the opcode. */
tmp |= 0x40;
/* Write it. */
abort ();
}
- /* Output the target. */
- bfd_put_8 (abfd, gap, data + dst_address - 1);
+ /* Output the target. */
+ bfd_put_8 (abfd, gap, data + dst_address - 1);
- /* We don't advance dst_address -- the 8bit reloc is applied at
- dst_address - 1, so the next insn should begin at dst_address. */
- src_address += 2;
+ /* We don't advance dst_address -- the 8-bit reloc is applied at
+ dst_address - 1, so the next insn should begin at dst_address. */
+ src_address += 2;
- break;
-
- /* Similarly for a 24bit absolute that is now 8 bits. */
+ break;
+
+ /* Similarly for a 24-bit absolute that is now 8 bits. */
case R_JMPL2:
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
/* Get the address of the instruction (not the reloc). */
- dot = (link_order->offset
+ dot = (input_section->output_offset
+ dst_address
+ link_order->u.indirect.section->output_section->vma + 2);
break;
- /* A 16bit absolute mov.b that is now an 8bit absolute mov.b. */
+ /* This is a 16-bit absolute address in one of the following
+ instructions:
+
+ "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
+ "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", and
+ "mov.b"
+
+ We may relax this into an 8-bit absolute address if it's in
+ the right range. */
case R_MOV16B2:
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- /* Sanity check. */
+ /* All instructions with R_H8_DIR16B2 start with 0x6a. */
if (data[dst_address - 2] != 0x6a)
abort ();
+ temp_code = data[src_address - 1];
+
+ /* If this is a mov.b instruction, clear the lower nibble, which
+ contains the source/destination register number. */
+ if ((temp_code & 0x10) != 0x10)
+ temp_code &= 0xf0;
+
/* Fix up the opcode. */
- switch (data[src_address - 1] & 0xf0)
+ switch (temp_code)
{
case 0x00:
+ /* This is mov.b @aa:16,Rd. */
data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20;
break;
case 0x80:
+ /* This is mov.b Rs,@aa:16. */
data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30;
break;
+ case 0x18:
+ /* This is a bit-maniputation instruction that stores one
+ bit into memory, one of "bclr", "bist", "bnot", "bset",
+ and "bst". */
+ data[dst_address - 2] = 0x7f;
+ break;
+ case 0x10:
+ /* This is a bit-maniputation instruction that loads one bit
+ from memory, one of "band", "biand", "bild", "bior",
+ "bixor", "bld", "bor", "btst", and "bxor". */
+ data[dst_address - 2] = 0x7e;
+ break;
default:
abort ();
}
src_address += 2;
break;
- /* Similarly for a 24bit mov.b */
+ /* This is a 24-bit absolute address in one of the following
+ instructions:
+
+ "band", "bclr", "biand", "bild", "bior", "bist", "bixor",
+ "bld", "bnot", "bor", "bset", "bst", "btst", "bxor", and
+ "mov.b"
+
+ We may relax this into an 8-bit absolute address if it's in
+ the right range. */
case R_MOV24B2:
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- /* Sanity check. */
+ /* All instructions with R_MOV24B2 start with 0x6a. */
if (data[dst_address - 2] != 0x6a)
abort ();
+ temp_code = data[src_address - 1];
+
+ /* If this is a mov.b instruction, clear the lower nibble, which
+ contains the source/destination register number. */
+ if ((temp_code & 0x30) != 0x30)
+ temp_code &= 0xf0;
+
/* Fix up the opcode. */
- switch (data[src_address - 1] & 0xf0)
+ switch (temp_code)
{
case 0x20:
+ /* This is mov.b @aa:24/32,Rd. */
data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x20;
break;
case 0xa0:
+ /* This is mov.b Rs,@aa:24/32. */
data[dst_address - 2] = (data[src_address - 1] & 0xf) | 0x30;
break;
+ case 0x38:
+ /* This is a bit-maniputation instruction that stores one
+ bit into memory, one of "bclr", "bist", "bnot", "bset",
+ and "bst". */
+ data[dst_address - 2] = 0x7f;
+ break;
+ case 0x30:
+ /* This is a bit-maniputation instruction that loads one bit
+ from memory, one of "band", "biand", "bild", "bior",
+ "bixor", "bld", "bor", "btst", and "bxor". */
+ data[dst_address - 2] = 0x7e;
+ break;
default:
abort ();
}
/* Get the address of the target of this branch. */
value = bfd_coff_reloc16_get_value (reloc, link_info, input_section);
- dot = (link_order->offset
+ dot = (input_section->output_offset
+ dst_address
+ link_order->u.indirect.section->output_section->vma) + 1;
if (gap < -128 || gap > 126)
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
src_address += 4;
break;
- /* An 8bit memory indirect instruction (jmp/jsr).
+ /* An 8-bit memory indirect instruction (jmp/jsr).
There's several things that need to be done to handle
this relocation.
/* We need to find the symbol so we can determine it's
address in the function vector table. */
asymbol *symbol;
- bfd_vma value;
const char *name;
+ struct funcvec_hash_table *ftab;
struct funcvec_hash_entry *h;
- asection *vectors_sec = h8300_coff_hash_table (link_info)->vectors_sec;
+ struct h8300_coff_link_hash_table *htab;
+ asection *vectors_sec;
+
+ if (link_info->output_bfd->xvec != abfd->xvec)
+ {
+ (*_bfd_error_handler)
+ (_("cannot handle R_MEM_INDIRECT reloc when using %s output"),
+ link_info->output_bfd->xvec->name);
+
+ /* What else can we do? This function doesn't allow return
+ of an error, and we don't want to call abort as that
+ indicates an internal error. */
+#ifndef EXIT_FAILURE
+#define EXIT_FAILURE 1
+#endif
+ xexit (EXIT_FAILURE);
+ }
+ htab = h8300_coff_hash_table (link_info);
+ vectors_sec = htab->vectors_sec;
/* First see if this is a reloc against the absolute symbol
or against a symbol with a nonnegative value <= 0xff. */
else
{
if (! ((*link_info->callbacks->reloc_overflow)
- (link_info, bfd_asymbol_name (*reloc->sym_ptr_ptr),
+ (link_info, NULL,
+ bfd_asymbol_name (*reloc->sym_ptr_ptr),
reloc->howto->name, reloc->addend, input_section->owner,
input_section, reloc->address)))
abort ();
}
/* This is a jump/call through a function vector, and we're
- expected to create the function vector ourselves.
+ expected to create the function vector ourselves.
First look up this symbol in the linker hash table -- we need
the derived linker symbol which holds this symbol's index
name = symbol->name;
if (symbol->flags & BSF_LOCAL)
{
- char *new_name = bfd_malloc (strlen (name) + 9);
+ char *new_name = bfd_malloc ((bfd_size_type) strlen (name) + 10);
+
if (new_name == NULL)
abort ();
- strcpy (new_name, name);
- sprintf (new_name + strlen (name), "_%08x",
- (int) symbol->section);
+ sprintf (new_name, "%s_%08x", name, symbol->section->id);
name = new_name;
}
- h = funcvec_hash_lookup (h8300_coff_hash_table (link_info)->funcvec_hash_table,
- name, false, false);
+ ftab = htab->funcvec_hash_table;
+ h = funcvec_hash_lookup (ftab, name, FALSE, FALSE);
/* This shouldn't ever happen. If it does that means we've got
data corruption of some kind. Aborting seems like a reasonable
- think to do here. */
+ thing to do here. */
if (h == NULL || vectors_sec == NULL)
abort ();
src_address++;
/* Now create an entry in the function vector itself. */
- if (bfd_get_mach (input_section->owner) == bfd_mach_h8300)
- bfd_put_16 (abfd,
- bfd_coff_reloc16_get_value (reloc,
- link_info,
- input_section),
- vectors_sec->contents + h->offset);
- else if (bfd_get_mach (input_section->owner) == bfd_mach_h8300h
- || bfd_get_mach (input_section->owner) == bfd_mach_h8300s)
- bfd_put_32 (abfd,
- bfd_coff_reloc16_get_value (reloc,
- link_info,
- input_section),
- vectors_sec->contents + h->offset);
- else
- abort ();
+ switch (bfd_get_mach (input_section->owner))
+ {
+ case bfd_mach_h8300:
+ case bfd_mach_h8300hn:
+ case bfd_mach_h8300sn:
+ bfd_put_16 (abfd,
+ bfd_coff_reloc16_get_value (reloc,
+ link_info,
+ input_section),
+ vectors_sec->contents + h->offset);
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300s:
+ bfd_put_32 (abfd,
+ bfd_coff_reloc16_get_value (reloc,
+ link_info,
+ input_section),
+ vectors_sec->contents + h->offset);
+ break;
+ default:
+ abort ();
+ }
/* Gross. We've already written the contents of the vector section
before we get here... So we write it again with the new data. */
bfd_set_section_contents (vectors_sec->output_section->owner,
vectors_sec->output_section,
vectors_sec->contents,
- vectors_sec->output_offset,
- vectors_sec->_raw_size);
+ (file_ptr) vectors_sec->output_offset,
+ vectors_sec->size);
break;
}
from this BFD to the bfd linker hash table. It may add a few
selected static symbols to the bfd linker hash table. */
-static boolean
-h8300_bfd_link_add_symbols (abfd, info)
- bfd *abfd;
- struct bfd_link_info *info;
+static bfd_boolean
+h8300_bfd_link_add_symbols (bfd *abfd, struct bfd_link_info *info)
{
asection *sec;
struct funcvec_hash_table *funcvec_hash_table;
+ bfd_size_type amt;
+ struct h8300_coff_link_hash_table *htab;
+
+ /* Add the symbols using the generic code. */
+ _bfd_generic_link_add_symbols (abfd, info);
+
+ if (info->output_bfd->xvec != abfd->xvec)
+ return TRUE;
+
+ htab = h8300_coff_hash_table (info);
/* If we haven't created a vectors section, do so now. */
- if (!h8300_coff_hash_table (info)->vectors_sec)
+ if (!htab->vectors_sec)
{
flagword flags;
/* Make sure the appropriate flags are set, including SEC_IN_MEMORY. */
flags = (SEC_ALLOC | SEC_LOAD
| SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_READONLY);
- h8300_coff_hash_table (info)->vectors_sec = bfd_make_section (abfd,
- ".vectors");
+ htab->vectors_sec = bfd_make_section_with_flags (abfd, ".vectors",
+ flags);
/* If the section wasn't created, or we couldn't set the flags,
- quit quickly now, rather than dieing a painful death later. */
- if (! h8300_coff_hash_table (info)->vectors_sec
- || ! bfd_set_section_flags (abfd,
- h8300_coff_hash_table(info)->vectors_sec,
- flags))
- return false;
+ quit quickly now, rather than dying a painful death later. */
+ if (!htab->vectors_sec)
+ return FALSE;
/* Also create the vector hash table. */
- funcvec_hash_table = ((struct funcvec_hash_table *)
- bfd_alloc (abfd, sizeof (struct funcvec_hash_table)));
+ amt = sizeof (struct funcvec_hash_table);
+ funcvec_hash_table = (struct funcvec_hash_table *) bfd_alloc (abfd, amt);
if (!funcvec_hash_table)
- return false;
+ return FALSE;
/* And initialize the funcvec hash table. */
if (!funcvec_hash_table_init (funcvec_hash_table, abfd,
- funcvec_hash_newfunc))
+ funcvec_hash_newfunc,
+ sizeof (struct funcvec_hash_entry)))
{
bfd_release (abfd, funcvec_hash_table);
- return false;
+ return FALSE;
}
/* Store away a pointer to the funcvec hash table. */
- h8300_coff_hash_table (info)->funcvec_hash_table = funcvec_hash_table;
+ htab->funcvec_hash_table = funcvec_hash_table;
}
/* Load up the function vector hash table. */
- funcvec_hash_table = h8300_coff_hash_table (info)->funcvec_hash_table;
-
- /* Add the symbols using the generic code. */
- _bfd_generic_link_add_symbols (abfd, info);
+ funcvec_hash_table = htab->funcvec_hash_table;
/* Now scan the relocs for all the sections in this bfd; create
additional space in the .vectors section as needed. */
if (reloc_size <= 0)
continue;
- relocs = (arelent **) bfd_malloc ((size_t) reloc_size);
+ relocs = (arelent **) bfd_malloc ((bfd_size_type) reloc_size);
if (!relocs)
- return false;
+ return FALSE;
/* The symbols should have been read in by _bfd_generic link_add_symbols
call abovec, so we can cheat and use the pointer to them that was
&& symbol != bfd_abs_section_ptr->symbol)
{
+ struct funcvec_hash_table *ftab;
struct funcvec_hash_entry *h;
name = symbol->name;
if (symbol->flags & BSF_LOCAL)
{
- char *new_name = bfd_malloc (strlen (name) + 9);
+ char *new_name;
+ new_name = bfd_malloc ((bfd_size_type) strlen (name) + 10);
if (new_name == NULL)
abort ();
- strcpy (new_name, name);
- sprintf (new_name + strlen (name), "_%08x",
- (int) symbol->section);
+ sprintf (new_name, "%s_%08x", name, symbol->section->id);
name = new_name;
}
/* Look this symbol up in the function vector hash table. */
- h = funcvec_hash_lookup (h8300_coff_hash_table (info)->funcvec_hash_table,
- name, false, false);
-
+ ftab = htab->funcvec_hash_table;
+ h = funcvec_hash_lookup (ftab, name, FALSE, FALSE);
/* If this symbol isn't already in the hash table, add
it and bump up the size of the hash table. */
if (h == NULL)
{
- h = funcvec_hash_lookup (h8300_coff_hash_table (info)->funcvec_hash_table,
- name, true, true);
+ h = funcvec_hash_lookup (ftab, name, TRUE, TRUE);
if (h == NULL)
{
free (relocs);
- return false;
+ return FALSE;
}
/* Bump the size of the vectors section. Each vector
takes 2 bytes on the h8300 and 4 bytes on the h8300h. */
- if (bfd_get_mach (abfd) == bfd_mach_h8300)
- h8300_coff_hash_table (info)->vectors_sec->_raw_size += 2;
- else if (bfd_get_mach (abfd) == bfd_mach_h8300h
- || bfd_get_mach (abfd) == bfd_mach_h8300s)
- h8300_coff_hash_table (info)->vectors_sec->_raw_size += 4;
+ switch (bfd_get_mach (abfd))
+ {
+ case bfd_mach_h8300:
+ case bfd_mach_h8300hn:
+ case bfd_mach_h8300sn:
+ htab->vectors_sec->size += 2;
+ break;
+ case bfd_mach_h8300h:
+ case bfd_mach_h8300s:
+ htab->vectors_sec->size += 4;
+ break;
+ default:
+ abort ();
+ }
}
}
}
/* Now actually allocate some space for the function vector. It's
wasteful to do this more than once, but this is easier. */
- if (h8300_coff_hash_table (info)->vectors_sec->_raw_size != 0)
+ sec = htab->vectors_sec;
+ if (sec->size != 0)
{
/* Free the old contents. */
- if (h8300_coff_hash_table (info)->vectors_sec->contents)
- free (h8300_coff_hash_table (info)->vectors_sec->contents);
+ if (sec->contents)
+ free (sec->contents);
/* Allocate new contents. */
- h8300_coff_hash_table (info)->vectors_sec->contents
- = bfd_malloc (h8300_coff_hash_table (info)->vectors_sec->_raw_size);
+ sec->contents = bfd_malloc (sec->size);
}
- return true;
+ return TRUE;
}
#define coff_reloc16_extra_cases h8300_reloc16_extra_cases
#define coff_bfd_link_hash_table_create h8300_coff_link_hash_table_create
#define COFF_LONG_FILENAMES
+
+#ifndef bfd_pe_print_pdata
+#define bfd_pe_print_pdata NULL
+#endif
+
#include "coffcode.h"
#undef coff_bfd_get_relocated_section_contents
bfd_coff_reloc16_get_relocated_section_contents
#define coff_bfd_relax_section bfd_coff_reloc16_relax_section
-CREATE_BIG_COFF_TARGET_VEC (h8300coff_vec, "coff-h8300", BFD_IS_RELAXABLE, 0, '_', NULL)
+CREATE_BIG_COFF_TARGET_VEC (h8300coff_vec, "coff-h8300", BFD_IS_RELAXABLE, 0, '_', NULL, COFF_SWAP_TABLE)