/* BFD back-end for Renesas Super-H COFF binaries.
- Copyright (C) 1993-2017 Free Software Foundation, Inc.
+ Copyright (C) 1993-2019 Free Software Foundation, Inc.
Contributed by Cygnus Support.
Written by Steve Chamberlain, <sac@cygnus.com>.
Relaxing code written by Ian Lance Taylor, <ian@cygnus.com>.
EMPTY_HOWTO (15),
#ifdef COFF_WITH_PE
- HOWTO (R_SH_IMAGEBASE, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 32, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
+ HOWTO (R_SH_IMAGEBASE, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
complain_overflow_bitfield, /* complain_on_overflow */
- sh_reloc, /* special_function */
- "rva32", /* name */
- TRUE, /* partial_inplace */
- 0xffffffff, /* src_mask */
- 0xffffffff, /* dst_mask */
- FALSE), /* pcrel_offset */
+ sh_reloc, /* special_function */
+ "rva32", /* name */
+ TRUE, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
#else
EMPTY_HOWTO (16), /* R_SH_IMM8 */
#endif
*addendp -= 4;
/* If the symbol is defined, then the generic code is going to
- add back the symbol value in order to cancel out an
- adjustment it made to the addend. However, we set the addend
- to 0 at the start of this function. We need to adjust here,
- to avoid the adjustment the generic code will make. FIXME:
- This is getting a bit hackish. */
+ add back the symbol value in order to cancel out an
+ adjustment it made to the addend. However, we set the addend
+ to 0 at the start of this function. We need to adjust here,
+ to avoid the adjustment the generic code will make. FIXME:
+ This is getting a bit hackish. */
if (sym != NULL && sym->n_scnum != 0)
*addendp -= sym->n_value;
}
#define coff_bfd_reloc_name_lookup sh_coff_reloc_name_lookup
static reloc_howto_type *
-sh_coff_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
+sh_coff_reloc_type_lookup (bfd *abfd,
bfd_reloc_code_real_type code)
{
unsigned int i;
if (sh_reloc_map[i].bfd_reloc_val == code)
return &sh_coff_howtos[(int) sh_reloc_map[i].shcoff_reloc_val];
- _bfd_error_handler (_("SH Error: unknown reloc type %d"), code);
+ _bfd_error_handler (_("%pB: unsupported relocation type %#x"),
+ abfd, (unsigned int) code);
return NULL;
}
&& bfd_is_und_section (symbol_in->section))
return bfd_reloc_undefined;
+ if (addr > input_section->size)
+ return bfd_reloc_outofrange;
+
sym_value = get_symbol_value (symbol_in);
switch (r_type)
}
/* The r_offset field of the R_SH_USES reloc will point us to
- the register load. The 4 is because the r_offset field is
- computed as though it were a jump offset, which are based
- from 4 bytes after the jump instruction. */
+ the register load. The 4 is because the r_offset field is
+ computed as though it were a jump offset, which are based
+ from 4 bytes after the jump instruction. */
laddr = irel->r_vaddr - sec->vma + 4;
/* Careful to sign extend the 32-bit offset. */
laddr += ((irel->r_offset & 0xffffffff) ^ 0x80000000) - 0x80000000;
if (laddr >= sec->size)
{
/* xgettext: c-format */
- _bfd_error_handler (_("%B: 0x%lx: warning: bad R_SH_USES offset"),
- abfd, (unsigned long) irel->r_vaddr);
+ _bfd_error_handler
+ (_("%pB: %#" PRIx64 ": warning: bad R_SH_USES offset"),
+ abfd, (uint64_t) irel->r_vaddr);
continue;
}
insn = bfd_get_16 (abfd, contents + laddr);
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x"),
- abfd, (unsigned long) irel->r_vaddr, insn);
+ (_("%pB: %#" PRIx64 ": warning: R_SH_USES points to unrecognized insn %#x"),
+ abfd, (uint64_t) irel->r_vaddr, insn);
continue;
}
/* Get the address from which the register is being loaded. The
- displacement in the mov.l instruction is quadrupled. It is a
- displacement from four bytes after the movl instruction, but,
- before adding in the PC address, two least significant bits
- of the PC are cleared. We assume that the section is aligned
- on a four byte boundary. */
+ displacement in the mov.l instruction is quadrupled. It is a
+ displacement from four bytes after the movl instruction, but,
+ before adding in the PC address, two least significant bits
+ of the PC are cleared. We assume that the section is aligned
+ on a four byte boundary. */
paddr = insn & 0xff;
paddr *= 4;
paddr += (laddr + 4) &~ (bfd_vma) 3;
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: warning: bad R_SH_USES load offset"),
- abfd, (unsigned long) irel->r_vaddr);
+ (_("%pB: %#" PRIx64 ": warning: bad R_SH_USES load offset"),
+ abfd, (uint64_t) irel->r_vaddr);
continue;
}
/* Get the reloc for the address from which the register is
- being loaded. This reloc will tell us which function is
- actually being called. */
+ being loaded. This reloc will tell us which function is
+ actually being called. */
paddr += sec->vma;
for (irelfn = internal_relocs; irelfn < irelend; irelfn++)
if (irelfn->r_vaddr == paddr
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: warning: could not find expected reloc"),
- abfd, (unsigned long) paddr);
+ (_("%pB: %#" PRIx64 ": warning: could not find expected reloc"),
+ abfd, (uint64_t) paddr);
continue;
}
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: warning: symbol in unexpected section"),
- abfd, (unsigned long) paddr);
+ (_("%pB: %#" PRIx64 ": warning: symbol in unexpected section"),
+ abfd, (uint64_t) paddr);
continue;
}
&& h->root.type != bfd_link_hash_defweak)
{
/* This appears to be a reference to an undefined
- symbol. Just ignore it--it will be caught by the
- regular reloc processing. */
+ symbol. Just ignore it--it will be caught by the
+ regular reloc processing. */
continue;
}
/* Replace the jsr with a bsr. */
/* Change the R_SH_USES reloc into an R_SH_PCDISP reloc, and
- replace the jsr with a bsr. */
+ replace the jsr with a bsr. */
irel->r_type = R_SH_PCDISP;
irel->r_symndx = irelfn->r_symndx;
if (sym.n_sclass != C_EXT)
{
/* If this needs to be changed because of future relaxing,
- it will be handled here like other internal PCDISP
- relocs. */
+ it will be handled here like other internal PCDISP
+ relocs. */
bfd_put_16 (abfd,
(bfd_vma) 0xb000 | ((foff >> 1) & 0xfff),
contents + irel->r_vaddr - sec->vma);
else
{
/* We can't fully resolve this yet, because the external
- symbol value may be changed by future relaxing. We let
- the final link phase handle it. */
+ symbol value may be changed by future relaxing. We let
+ the final link phase handle it. */
bfd_put_16 (abfd, (bfd_vma) 0xb000,
contents + irel->r_vaddr - sec->vma);
}
/* See if there is another R_SH_USES reloc referring to the same
- register load. */
+ register load. */
for (irelscan = internal_relocs; irelscan < irelend; irelscan++)
if (irelscan->r_type == R_SH_USES
&& laddr == irelscan->r_vaddr - sec->vma + 4 + irelscan->r_offset)
}
/* Look for a R_SH_COUNT reloc on the location where the
- function address is stored. Do this before deleting any
- bytes, to avoid confusion about the address. */
+ function address is stored. Do this before deleting any
+ bytes, to avoid confusion about the address. */
for (irelcount = internal_relocs; irelcount < irelend; irelcount++)
if (irelcount->r_vaddr == paddr
&& irelcount->r_type == R_SH_COUNT)
goto error_return;
/* That will change things, so, just in case it permits some
- other function call to come within range, we should relax
- again. Note that this is not required, and it may be slow. */
+ other function call to come within range, we should relax
+ again. Note that this is not required, and it may be slow. */
*again = TRUE;
/* Now check whether we got a COUNT reloc. */
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: warning: could not find expected COUNT reloc"),
- abfd, (unsigned long) paddr);
+ (_("%pB: %#" PRIx64 ": warning: could not find expected COUNT reloc"),
+ abfd, (uint64_t) paddr);
continue;
}
/* The number of uses is stored in the r_offset field. We've
- just deleted one. */
+ just deleted one. */
if (irelcount->r_offset == 0)
{
/* xgettext: c-format */
- _bfd_error_handler (_("%B: 0x%lx: warning: bad count"),
- abfd, (unsigned long) paddr);
+ _bfd_error_handler (_("%pB: %#" PRIx64 ": warning: bad count"),
+ abfd, (uint64_t) paddr);
continue;
}
--irelcount->r_offset;
/* If there are no more uses, we can delete the address. Reload
- the address from irelfn, in case it was changed by the
- previous call to sh_relax_delete_bytes. */
+ the address from irelfn, in case it was changed by the
+ previous call to sh_relax_delete_bytes. */
if (irelcount->r_offset == 0)
{
if (! sh_relax_delete_bytes (abfd, sec,
contents = coff_section_data (abfd, sec)->contents;
- /* The deletion must stop at the next ALIGN reloc for an aligment
+ /* The deletion must stop at the next ALIGN reloc for an alignment
power larger than the number of bytes we are deleting. */
irelalign = NULL;
irel->r_type = R_SH_UNUSED;
/* If this is a PC relative reloc, see if the range it covers
- includes the bytes we have deleted. */
+ includes the bytes we have deleted. */
switch (irel->r_type)
{
default:
case R_SH_IMAGEBASE:
#endif
/* If this reloc is against a symbol defined in this
- section, and the symbol will not be adjusted below, we
- must check the addend to see it will put the value in
- range to be adjusted, and hence must be changed. */
+ section, and the symbol will not be adjusted below, we
+ must check the addend to see it will put the value in
+ range to be adjusted, and hence must be changed. */
bfd_coff_swap_sym_in (abfd,
((bfd_byte *) obj_coff_external_syms (abfd)
+ (irel->r_symndx
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: fatal: reloc overflow while relaxing"),
- abfd, (unsigned long) irel->r_vaddr);
+ (_("%pB: %#" PRIx64 ": fatal: reloc overflow while relaxing"),
+ abfd, (uint64_t) irel->r_vaddr);
bfd_set_error (bfd_error_bad_value);
return FALSE;
}
continue;
/* We always cache the relocs. Perhaps, if info->keep_memory is
- FALSE, we should free them, if we are permitted to, when we
- leave sh_coff_relax_section. */
+ FALSE, we should free them, if we are permitted to, when we
+ leave sh_coff_relax_section. */
internal_relocs = (_bfd_coff_read_internal_relocs
(abfd, o, TRUE, (bfd_byte *) NULL, FALSE,
(struct internal_reloc *) NULL));
if (!bfd_malloc_and_get_section (abfd, o, &ocontents))
return FALSE;
/* We always cache the section contents.
- Perhaps, if info->keep_memory is FALSE, we
- should free them, if we are permitted to,
- when we leave sh_coff_relax_section. */
+ Perhaps, if info->keep_memory is FALSE, we
+ should free them, if we are permitted to,
+ when we leave sh_coff_relax_section. */
coff_section_data (abfd, o)->contents = ocontents;
}
}
|| obj_raw_syments (abfd) != NULL)
{
_bfd_error_handler
- (_("%B: fatal: generic symbols retrieved before relaxing"), abfd);
+ (_("%pB: fatal: generic symbols retrieved before relaxing"), abfd);
bfd_set_error (bfd_error_invalid_operation);
return FALSE;
}
opend = op + min->count;
/* Since the opcodes tables are sorted, we could use a binary
- search here if the count were above some cutoff value. */
+ search here if the count were above some cutoff value. */
for (; op < opend; op++)
if (op->opcode == l)
return op;
int type, add;
/* There are a few special types of relocs that we don't want to
- adjust. These relocs do not apply to the instruction itself,
- but are only associated with the address. */
+ adjust. These relocs do not apply to the instruction itself,
+ but are only associated with the address. */
type = irel->r_type;
if (type == R_SH_ALIGN
|| type == R_SH_CODE
continue;
/* If an R_SH_USES reloc points to one of the addresses being
- swapped, we must adjust it. It would be incorrect to do this
- for a jump, though, since we want to execute both
- instructions after the jump. (We have avoided swapping
- around a label, so the jump will not wind up executing an
- instruction it shouldn't). */
+ swapped, we must adjust it. It would be incorrect to do this
+ for a jump, though, since we want to execute both
+ instructions after the jump. (We have avoided swapping
+ around a label, so the jump will not wind up executing an
+ instruction it shouldn't). */
if (type == R_SH_USES)
{
bfd_vma off;
case R_SH_PCRELIMM8BY4:
/* This reloc ignores the least significant 3 bits of
- the program counter before adding in the offset.
- This means that if ADDR is at an even address, the
- swap will not affect the offset. If ADDR is an at an
- odd address, then the instruction will be crossing a
- four byte boundary, and must be adjusted. */
+ the program counter before adding in the offset.
+ This means that if ADDR is at an even address, the
+ swap will not affect the offset. If ADDR is an at an
+ odd address, then the instruction will be crossing a
+ four byte boundary, and must be adjusted. */
if ((addr & 3) != 0)
{
insn = bfd_get_16 (abfd, loc);
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: 0x%lx: fatal: reloc overflow while relaxing"),
- abfd, (unsigned long) irel->r_vaddr);
+ (_("%pB: %#" PRIx64 ": fatal: reloc overflow while relaxing"),
+ abfd, (uint64_t) irel->r_vaddr);
bfd_set_error (bfd_error_bad_value);
return FALSE;
}
bfd_reloc_status_type rstat;
/* Almost all relocs have to do with relaxing. If any work must
- be done for them, it has been done in sh_relax_section. */
+ be done for them, it has been done in sh_relax_section. */
if (rel->r_type != R_SH_IMM32
#ifdef COFF_WITH_PE
&& rel->r_type != R_SH_IMM32CE
{
_bfd_error_handler
/* xgettext: c-format */
- (_("%B: illegal symbol index %ld in relocs"),
+ (_("%pB: illegal symbol index %ld in relocs"),
input_bfd, symndx);
bfd_set_error (bfd_error_bad_value);
return FALSE;
else
{
sec = sections[symndx];
- val = (sec->output_section->vma
+ val = (sec->output_section->vma
+ sec->output_offset
+ sym->n_value
- sec->vma);
name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset;
else
{
- strncpy (buf, sym->_n._n_name, SYMNMLEN);
+ strncpy (buf, sym->_n._n_name, SYMNMLEN);
buf[SYMNMLEN] = '\0';
name = buf;
}
struct internal_reloc *internal_relocs = NULL;
struct internal_syment *internal_syms = NULL;
-fprintf (stderr, "DATA = %p\n", data);
/* We only need to handle the case of relaxing, or of having a
particular set of section contents, specially. */
if (relocatable
BFD_ENDIAN_BIG, /* data byte order is big */
BFD_ENDIAN_BIG, /* header byte order is big */
- (HAS_RELOC | EXEC_P | /* object flags */
- HAS_LINENO | HAS_DEBUG |
- HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE),
+ (HAS_RELOC | EXEC_P /* object flags */
+ | HAS_LINENO | HAS_DEBUG
+ | HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE),
(SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC),
'_', /* leading symbol underscore */
bfd_getb32, bfd_getb_signed_32, bfd_putb32,
bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */
- {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */
- bfd_generic_archive_p, _bfd_dummy_target},
- {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
- bfd_false},
- {bfd_false, coff_write_object_contents, /* bfd_write_contents */
- _bfd_write_archive_contents, bfd_false},
+ { /* bfd_check_format */
+ _bfd_dummy_target,
+ coff_small_object_p,
+ bfd_generic_archive_p,
+ _bfd_dummy_target
+ },
+ { /* bfd_set_format */
+ _bfd_bool_bfd_false_error,
+ coff_mkobject,
+ _bfd_generic_mkarchive,
+ _bfd_bool_bfd_false_error
+ },
+ { /* bfd_write_contents */
+ _bfd_bool_bfd_false_error,
+ coff_write_object_contents,
+ _bfd_write_archive_contents,
+ _bfd_bool_bfd_false_error
+ },
BFD_JUMP_TABLE_GENERIC (coff_small),
BFD_JUMP_TABLE_COPY (coff),
BFD_JUMP_TABLE_LINK (coff),
BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
- & sh_coff_small_le_vec,
+ &sh_coff_small_le_vec,
- & bfd_coff_small_swap_table
+ &bfd_coff_small_swap_table
};
const bfd_target sh_coff_small_le_vec =
BFD_ENDIAN_LITTLE, /* data byte order is little */
BFD_ENDIAN_LITTLE, /* header byte order is little endian too*/
- (HAS_RELOC | EXEC_P | /* object flags */
- HAS_LINENO | HAS_DEBUG |
- HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE),
+ (HAS_RELOC | EXEC_P /* object flags */
+ | HAS_LINENO | HAS_DEBUG
+ | HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE),
(SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC),
'_', /* leading symbol underscore */
bfd_getl32, bfd_getl_signed_32, bfd_putl32,
bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */
- {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */
- bfd_generic_archive_p, _bfd_dummy_target},
- {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */
- bfd_false},
- {bfd_false, coff_write_object_contents, /* bfd_write_contents */
- _bfd_write_archive_contents, bfd_false},
+ { /* bfd_check_format */
+ _bfd_dummy_target,
+ coff_small_object_p,
+ bfd_generic_archive_p,
+ _bfd_dummy_target
+ },
+ { /* bfd_set_format */
+ _bfd_bool_bfd_false_error,
+ coff_mkobject,
+ _bfd_generic_mkarchive,
+ _bfd_bool_bfd_false_error
+ },
+ { /* bfd_write_contents */
+ _bfd_bool_bfd_false_error,
+ coff_write_object_contents,
+ _bfd_write_archive_contents,
+ _bfd_bool_bfd_false_error
+ },
BFD_JUMP_TABLE_GENERIC (coff_small),
BFD_JUMP_TABLE_COPY (coff),
BFD_JUMP_TABLE_LINK (coff),
BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
- & sh_coff_small_vec,
+ &sh_coff_small_vec,
- & bfd_coff_small_swap_table
+ &bfd_coff_small_swap_table
};
#endif