/* Support for the generic parts of most COFF variants, for BFD.
- Copyright (C) 1990-1991 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/*doc*
-@section coff backends
-
-BFD supports a number of different flavours of coff format. The major
-difference between formats are the sizes and alignments of fields in
-structures on disk, and the occasional extra field.
-
-Coff in all its varieties is implimented with a few common files and a
-number of implementation specific files. For example, The 88k bcs coff
-format is implemented in the file @code{m88k-bcs.c}. This file
-@code{#include}s @code{m88k-bcs.h} which defines the external
-structure of the coff format for the 88k, and @code{internalcoff.h}
-which defines the internal structure. @code{m88k-bcs.c} also defines
-the relocations used by the 88k format @xref{Relocations}. Then the
-major portion of coff code is included (@code{coffcode.h}) which
-defines the methods used to act upon the types defined in
-@code{m88k-bcs.h} and @code{internalcoff.h}.
-
-The Intel i960 processor version of coff is implemented in
-@code{icoff.c}. This file has the same structure as
-@code{m88k-bcs.c}, except that it includes @code{intel-coff.h} rather
-than @code{m88k-bcs.h}.
-
-@subsection Porting To A New Version of Coff
-
-The recommended method is to select from the existing implimentations
-the version of coff which is most like the one you want to use, for
-our purposes, we'll say that i386 coff is the one you select, and that
-your coff flavour is called foo. Copy the @code{i386coff.c} to @code{foocoff.c},
-copy @code{../include/i386coff.h} to @code{../include/foocoff.h} and
-add the lines to @code{targets.c} and @code{Makefile.in} so that your
-new back end is used.
-
-Alter the shapes of the structures in @code{../include/foocoff.h} so
-that they match what you need. You will probably also have to add
-@code{#ifdef}s to the code in @code{internalcoff.h} and
-@code{coffcode.h} if your version of coff is too wild.
-
-You can verify that your new BFD backend works quite simply by
-building @code{objdump} from the @code{binutils} directory, and
-making sure that its version of what's going on at your host systems
-idea (assuming it has the pretty standard coff dump utility (usually
-called @code{att-dump} or just @code{dump})) are the same.
-
-Then clean up your code, and send what you've done to Cygnus. Then your stuff
-will be in the next release, and you won't have to keep integrating
-it.
-
-@subsection How The Coff Backend Works
-
-@subsubsection Bit Twiddling
-Each flavour of coff supported in BFD has its own header file
-descibing the external layout of the structures. There is also an
-internal description of the coff layout (in @code{internalcoff.h})
-file (@code{}). A major function of the coff backend is swapping the
-bytes and twiddling the bits to translate the external form of the
-structures into the normal internal form. This is all performed in the
-@code{bfd_swap}_@i{thing}_@i{direction} routines. Some elements are
-different sizes between different versions of coff, it is the duty of
-the coff version specific include file to override the definitions of
-various packing routines in @code{coffcode.h}. Eg the size of line
-number entry in coff is sometimes 16 bits, and sometimes 32 bits.
-@code{#define}ing @code{PUT_LNSZ_LNNO} and @code{GET_LNSZ_LNNO} will
-select the correct one. No doubt, some day someone will find a version
-of coff which has a varying field size not catered for at the moment.
-To port BFD, that person will have to add more @code{#defines}.
-
-Three of the bit twiddling routines are exported to @code{gdb};
-@code{coff_swap_aux_in}, @code{coff_swap_sym_in} and
-@code{coff_swap_linno_in}. @code{GDB} reads the symbol table on its
-own, but uses BFD to fix things up.
-
-More of the bit twiddlers are exported for @code{gas};
-@code{coff_swap_aux_out}, @code{coff_swap_sym_out},
-@code{coff_swap_lineno_out}, @code{coff_swap_reloc_out},
-@code{coff_swap_filehdr_out}, @code{coff_swap_aouthdr_out},
-@code{coff_swap_scnhdr_out}. @code{Gas} currently keeps track of all
-the symbol table and reloc drudgery itself, thereby saving the
-internal BFD overhead, but uses BFD to swap things on the way out,
-making cross ports much safer. This also allows BFD (and thus the
-linker) to use the same header files as @code{gas}, which makes one
-avenue to disaster disappear.
-
-@subsubsection Symbol Reading
-The simple canonical form for symbols used by BFD is not rich enough
-to keep all the information available in a coff symbol table. The back
-end gets around this by keeping the original symbol table around,
-"behind the scenes".
-
-When a symbol table is requested (through a call to
-@code{bfd_canonicalize_symtab}, a request gets through to
-@code{get_normalized_symtab}. This reads the symbol table from the
-coff file and swaps all the structures inside into the internal form.
-It also fixes up all the pointers in the table (represented in the file
-by offsets from the first symbol in the table) into physical pointers
-to elements in the new internal table. This involves some work since
-the meanings of fields changes depending upon context; a field that is a
-pointer to another structure in the symbol table at one moment may be
-the size in bytes of a structure in the next.
-
-Another pass is made over the table. All symbols which mark file names
-(@code{C_FILE} symbols) are modified so that the internal string
-points to the value in the auxent (the real filename) rather than the
-normal text associated with the symbol (@code{".file"}).
-
-At this time the symbol names are moved around. Coff stores all
-symbols less than nine characters long physically within the symbol
-table, longer strings are kept at the end of the file in the string
-table. This pass moves all strings into memory, and replaces them with
-pointers to the strings.
-
-The symbol table is massaged once again, this time to create the
-canonical table used by the BFD application. Each symbol is inspected
-in turn, and a decision made (using the @code{sclass} field) about the
-various flags to set in the @code{asymbol} @xref{Symbols}. The
-generated canonical table shares strings with the hidden internal
-symbol table.
-
-Any linenumbers are read from the coff file too, and attached to the
-symbols which own the functions the linenumbers belong to.
-
-@subsubsection Symbol Writing
-Writing a symbol to a coff file which didn't come from a coff file
-will lose any debugging information. The @code{asymbol} structure
-remembers the BFD from which was born, and on output the back end
-makes sure that the same destination target as source target is
-present.
-
-When the symbols have come from a coff file then all the debugging
-information is preserved.
-
-Symbol tables are provided for writing to the back end in a vector of
-pointers to pointers. This allows applications like the linker to
-accumulate and output large symbol tables without having to do too
-much byte copying.
-
-The symbol table is not output to a writable BFD until it is closed.
-The order of operations on the canonical symbol table at that point
-are:
-@table @code
-@item coff_renumber_symbols
-This function runs through the provided symbol table and patches each
-symbol marked as a file place holder (@code{C_FILE}) to point to the
-next file place holder in the list. It also marks each @code{offset}
-field in the list with the offset from the first symbol of the current
-symbol.
-
-Another function of this procedure is to turn the canonical value form
-of BFD into the form used by coff. Internally, BFD expects symbol
-values to be offsets from a section base; so a symbol physically at
-0x120, but in a section starting at 0x100, would have the value 0x20.
-Coff expects symbols to contain their final value, so symbols have
-their values changed at this point to reflect their sum with their
-owning section. Note that this transformation uses the
-@code{output_section} field of the @code{asymbol}'s @code{asection}
-@xref{Sections}.
-@item coff_mangle_symbols
-This routine runs though the provided symbol table and uses the
-offsets generated by the previous pass and the pointers generated when
-the symbol table was read in to create the structured hierachy
-required by coff. It changes each pointer to a symbol to an index into
-the symbol table of the symbol being referenced.
-@item coff_write_symbols
-This routine runs through the symbol table and patches up the symbols
-from their internal form into the coff way, calls the bit twiddlers
-and writes out the tabel to the file.
-@end table
+/*
+Most of this hacked by Steve Chamberlain,
+ sac@cygnus.com
*/
+/*
-/*proto*
-
-The hidden information for an asymbol is:
-
-*+++
-
-$ typedef struct coff_ptr_struct
-$ {
-
-Remembers the offset from the first symbol in the file for this
-symbol. Generated by @code{coff_renumber_symbols}.
-
-$ unsigned int offset;
-
-Should the tag field of this symbol be renumbered.
-Created by @code{coff_pointerize_aux}.
-
-$ char fix_tag;
-
-Should the endidx field of this symbol be renumbered.
-Created by @code{coff_pointerize_aux}.
-
-$ char fix_end;
-
-The container for the symbol structure as read and translated from the file.
-
-$ union {
-$ union internal_auxent auxent;
-$ struct internal_syment syment;
-$ } u;
-$ } combined_entry_type;
-$
-
-*---
-
-Each canonical asymbol really looks like this:
-
-*+++
-
-$ typedef struct coff_symbol_struct
-$ {
-
-The actual symbol which the rest of BFD works with
-
-$ asymbol symbol;
-
-A pointer to the hidden information for this symbol
-
-$ combined_entry_type *native;
-
-A pointer to the linenumber information for this symbol
-
-$ struct lineno_cache_entry *lineno;
-$ } coff_symbol_type;
-
-*---
+SECTION
+ coff backends
+
+ BFD supports a number of different flavours of coff format.
+ The major difference between formats are the sizes and
+ alignments of fields in structures on disk, and the occasional
+ extra field.
+
+ Coff in all its varieties is implimented with a few common
+ files and a number of implementation specific files. For
+ example, The 88k bcs coff format is implemented in the file
+ @code{coff-m88k.c}. This file @code{#include}s
+ @code{coff/m88k.h} which defines the external structure of the
+ coff format for the 88k, and @code{coff/internal.h} which
+ defines the internal structure. @code{coff-m88k.c} also
+ defines the relocations used by the 88k format
+ @xref{Relocations}.
+
+ The Intel i960 processor version of coff is implemented in
+ @code{coff-i960.c}. This file has the same structure as
+ @code{coff-m88k.c}, except that it includes @code{coff/i960.h}
+ rather than @code{coff-m88k.h}.
+
+SUBSECTION
+ Porting To A New Version of Coff
+
+ The recommended method is to select from the existing
+ implimentations the version of coff which is most like the one
+ you want to use, for our purposes, we'll say that i386 coff is
+ the one you select, and that your coff flavour is called foo.
+ Copy the @code{i386coff.c} to @code{foocoff.c}, copy
+ @code{../include/coff/i386.h} to @code{../include/coff/foo.h}
+ and add the lines to @code{targets.c} and @code{Makefile.in}
+ so that your new back end is used. Alter the shapes of the
+ structures in @code{../include/coff/foo.h} so that they match
+ what you need. You will probably also have to add
+ @code{#ifdef}s to the code in @code{coff/internal.h} and
+ @code{coffcode.h} if your version of coff is too wild.
+
+ You can verify that your new BFD backend works quite simply by
+ building @code{objdump} from the @code{binutils} directory,
+ and making sure that its version of what's going on at your
+ host systems idea (assuming it has the pretty standard coff
+ dump utility (usually called @code{att-dump} or just
+ @code{dump})) are the same. Then clean up your code, and send
+ what you've done to Cygnus. Then your stuff will be in the
+ next release, and you won't have to keep integrating it.
+
+SUBSECTION
+ How The Coff Backend Works
+
+SUBSUBSECTION
+ File Layout
+
+ The Coff backend is split into generic routines that are
+ applicable to any Coff target and routines that are specific
+ to a particular target. The target-specific routines are
+ further split into ones which are basically the same for all
+ Coff targets except that they use the external symbol format
+ or use different values for certain constants.
+
+ The generic routines are in @file{coffgen.c}. These routines
+ work for any Coff target. They use some hooks into the target
+ specific code; the hooks are in a @code{bfd_coff_backend_data}
+ structure, one of which exists for each target.
+
+ The essentially similar target-specific routines are in
+ @file{coffcode.h}. This header file includes executable code.
+ The various Coff targets first include the appropriate Coff
+ header file, make any special defines that are needed, and
+ then include @file{coffcode.h}.
+
+ Some of the Coff targets then also have additional routines in
+ the target source file itself.
+
+ For example, @file{coff-i960.c} includes
+ @file{coff/internal.h} and @file{coff/i960.h}. It then
+ defines a few constants, such as @code{I960}, and includes
+ @file{coffcode.h}. Since the i960 has complex relocation
+ types, @file{coff-i960.c} also includes some code to
+ manipulate the i960 relocs. This code is not in
+ @file{coffcode.h} because it would not be used by any other
+ target.
+
+SUBSUBSECTION
+ Bit Twiddling
+
+ Each flavour of coff supported in BFD has its own header file
+ descibing the external layout of the structures. There is also
+ an internal description of the coff layout (in
+ @code{coff/internal.h}). A major function of the
+ coff backend is swapping the bytes and twiddling the bits to
+ translate the external form of the structures into the normal
+ internal form. This is all performed in the
+ @code{bfd_swap}_@i{thing}_@i{direction} routines. Some
+ elements are different sizes between different versions of
+ coff, it is the duty of the coff version specific include file
+ to override the definitions of various packing routines in
+ @code{coffcode.h}. Eg the size of line number entry in coff is
+ sometimes 16 bits, and sometimes 32 bits. @code{#define}ing
+ @code{PUT_LNSZ_LNNO} and @code{GET_LNSZ_LNNO} will select the
+ correct one. No doubt, some day someone will find a version of
+ coff which has a varying field size not catered for at the
+ moment. To port BFD, that person will have to add more @code{#defines}.
+ Three of the bit twiddling routines are exported to
+ @code{gdb}; @code{coff_swap_aux_in}, @code{coff_swap_sym_in}
+ and @code{coff_swap_linno_in}. @code{GDB} reads the symbol
+ table on its own, but uses BFD to fix things up. More of the
+ bit twiddlers are exported for @code{gas};
+ @code{coff_swap_aux_out}, @code{coff_swap_sym_out},
+ @code{coff_swap_lineno_out}, @code{coff_swap_reloc_out},
+ @code{coff_swap_filehdr_out}, @code{coff_swap_aouthdr_out},
+ @code{coff_swap_scnhdr_out}. @code{Gas} currently keeps track
+ of all the symbol table and reloc drudgery itself, thereby
+ saving the internal BFD overhead, but uses BFD to swap things
+ on the way out, making cross ports much safer. This also
+ allows BFD (and thus the linker) to use the same header files
+ as @code{gas}, which makes one avenue to disaster disappear.
+
+SUBSUBSECTION
+ Symbol Reading
+
+ The simple canonical form for symbols used by BFD is not rich
+ enough to keep all the information available in a coff symbol
+ table. The back end gets around this by keeping the original
+ symbol table around, "behind the scenes".
+
+ When a symbol table is requested (through a call to
+ @code{bfd_canonicalize_symtab}, a request gets through to
+ @code{coff_get_normalized_symtab}. This reads the symbol table from
+ the coff file and swaps all the structures inside into the
+ internal form. It also fixes up all the pointers in the table
+ (represented in the file by offsets from the first symbol in
+ the table) into physical pointers to elements in the new
+ internal table. This involves some work since the meanings of
+ fields changes depending upon context; a field that is a
+ pointer to another structure in the symbol table at one moment
+ may be the size in bytes of a structure in the next. Another
+ pass is made over the table. All symbols which mark file names
+ (<<C_FILE>> symbols) are modified so that the internal
+ string points to the value in the auxent (the real filename)
+ rather than the normal text associated with the symbol
+ (@code{".file"}).
+
+ At this time the symbol names are moved around. Coff stores
+ all symbols less than nine characters long physically
+ within the symbol table, longer strings are kept at the end of
+ the file in the string table. This pass moves all strings
+ into memory, and replaces them with pointers to the strings.
+
+
+ The symbol table is massaged once again, this time to create
+ the canonical table used by the BFD application. Each symbol
+ is inspected in turn, and a decision made (using the
+ @code{sclass} field) about the various flags to set in the
+ @code{asymbol} @xref{Symbols}. The generated canonical table
+ shares strings with the hidden internal symbol table.
+
+ Any linenumbers are read from the coff file too, and attached
+ to the symbols which own the functions the linenumbers belong to.
+
+SUBSUBSECTION
+ Symbol Writing
+
+ Writing a symbol to a coff file which didn't come from a coff
+ file will lose any debugging information. The @code{asymbol}
+ structure remembers the BFD from which was born, and on output
+ the back end makes sure that the same destination target as
+ source target is present.
+
+ When the symbols have come from a coff file then all the
+ debugging information is preserved.
+
+ Symbol tables are provided for writing to the back end in a
+ vector of pointers to pointers. This allows applications like
+ the linker to accumulate and output large symbol tables
+ without having to do too much byte copying.
+
+ This function runs through the provided symbol table and
+ patches each symbol marked as a file place holder
+ (@code{C_FILE}) to point to the next file place holder in the
+ list. It also marks each @code{offset} field in the list with
+ the offset from the first symbol of the current symbol.
+
+ Another function of this procedure is to turn the canonical
+ value form of BFD into the form used by coff. Internally, BFD
+ expects symbol values to be offsets from a section base; so a
+ symbol physically at 0x120, but in a section starting at
+ 0x100, would have the value 0x20. Coff expects symbols to
+ contain their final value, so symbols have their values
+ changed at this point to reflect their sum with their owning
+ section. Note that this transformation uses the
+ <<output_section>> field of the @code{asymbol}'s
+ @code{asection} @xref{Sections}.
+
+ o coff_mangle_symbols
+
+ This routine runs though the provided symbol table and uses
+ the offsets generated by the previous pass and the pointers
+ generated when the symbol table was read in to create the
+ structured hierachy required by coff. It changes each pointer
+ to a symbol to an index into the symbol table of the symbol
+ being referenced.
+
+ o coff_write_symbols
+
+ This routine runs through the symbol table and patches up the
+ symbols from their internal form into the coff way, calls the
+ bit twiddlers and writes out the tabel to the file.
*/
-/* Most of this hacked by Steve Chamberlain, steve@cygnus.com */
-
-
-#define PUTWORD bfd_h_put_32
-#define PUTHALF bfd_h_put_16
-#define PUTBYTE bfd_h_put_8
-
-#ifndef GET_FCN_LNNOPTR
-#define GET_FCN_LNNOPTR(abfd, ext) bfd_h_get_32(abfd, (bfd_byte *) ext->x_sym.x_fcnary.x_fcn.x_lnnoptr)
-#endif
+/*
+INTERNAL_DEFINITION
+ coff_symbol_type
+
+DESCRIPTION
+ The hidden information for an asymbol is described in a
+ coff_ptr_struct, which is typedefed to a combined_entry_type
+
+CODE_FRAGMENT
+.
+.typedef struct coff_ptr_struct
+.{
+.
+. {* Remembers the offset from the first symbol in the file for
+. this symbol. Generated by coff_renumber_symbols. *}
+.unsigned int offset;
+.
+. {* Should the tag field of this symbol be renumbered.
+. Created by coff_pointerize_aux. *}
+.char fix_tag;
+.
+. {* Should the endidx field of this symbol be renumbered.
+. Created by coff_pointerize_aux. *}
+.char fix_end;
+.
+. {* The container for the symbol structure as read and translated
+. from the file. *}
+.
+.union {
+. union internal_auxent auxent;
+. struct internal_syment syment;
+. } u;
+.} combined_entry_type;
+.
+.
+.{* Each canonical asymbol really looks like this: *}
+.
+.typedef struct coff_symbol_struct
+.{
+. {* The actual symbol which the rest of BFD works with *}
+.asymbol symbol;
+.
+. {* A pointer to the hidden information for this symbol *}
+.combined_entry_type *native;
+.
+. {* A pointer to the linenumber information for this symbol *}
+.struct lineno_cache_entry *lineno;
+.
+. {* Have the line numbers been relocated yet ? *}
+.boolean done_lineno;
+.} coff_symbol_type;
-#ifndef GET_FCN_ENDNDX
-#define GET_FCN_ENDNDX(abfd, ext) bfd_h_get_32(abfd, (bfd_byte *) ext->x_sym.x_fcnary.x_fcn.x_endndx)
-#endif
-#ifndef PUT_FCN_LNNOPTR
-#define PUT_FCN_LNNOPTR(abfd, in, ext) PUTWORD(abfd, in, (bfd_byte *) ext->x_sym.x_fcnary.x_fcn.x_lnnoptr)
-#endif
-#ifndef PUT_FCN_ENDNDX
-#define PUT_FCN_ENDNDX(abfd, in, ext) PUTWORD(abfd, in, (bfd_byte *) ext->x_sym.x_fcnary.x_fcn.x_endndx)
-#endif
-#ifndef GET_LNSZ_LNNO
-#define GET_LNSZ_LNNO(abfd, ext) bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_misc.x_lnsz.x_lnno)
-#endif
-#ifndef GET_LNSZ_SIZE
-#define GET_LNSZ_SIZE(abfd, ext) bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_misc.x_lnsz.x_size)
-#endif
-#ifndef PUT_LNSZ_LNNO
-#define PUT_LNSZ_LNNO(abfd, in, ext) bfd_h_put_16(abfd, in, (bfd_byte *)ext->x_sym.x_misc.x_lnsz.x_lnno)
-#endif
-#ifndef PUT_LNSZ_SIZE
-#define PUT_LNSZ_SIZE(abfd, in, ext) bfd_h_put_16(abfd, in, (bfd_byte*) ext->x_sym.x_misc.x_lnsz.x_size)
-#endif
-#ifndef GET_SCN_SCNLEN
-#define GET_SCN_SCNLEN(abfd, ext) bfd_h_get_32(abfd, (bfd_byte *) ext->x_scn.x_scnlen)
-#endif
-#ifndef GET_SCN_NRELOC
-#define GET_SCN_NRELOC(abfd, ext) bfd_h_get_16(abfd, (bfd_byte *)ext->x_scn.x_nreloc)
-#endif
-#ifndef GET_SCN_NLINNO
-#define GET_SCN_NLINNO(abfd, ext) bfd_h_get_16(abfd, (bfd_byte *)ext->x_scn.x_nlinno)
-#endif
-#ifndef PUT_SCN_SCNLEN
-#define PUT_SCN_SCNLEN(abfd,in, ext) bfd_h_put_32(abfd, in, (bfd_byte *) ext->x_scn.x_scnlen)
-#endif
-#ifndef PUT_SCN_NRELOC
-#define PUT_SCN_NRELOC(abfd,in, ext) bfd_h_put_16(abfd, in, (bfd_byte *)ext->x_scn.x_nreloc)
-#endif
-#ifndef PUT_SCN_NLINNO
-#define PUT_SCN_NLINNO(abfd,in, ext) bfd_h_put_16(abfd,in, (bfd_byte *) ext->x_scn.x_nlinno)
-#endif
-#ifndef GET_LINENO_LNNO
-#define GET_LINENO_LNNO(abfd, ext) bfd_h_get_16(abfd, (bfd_byte *) (ext->l_lnno));
-#endif
-#ifndef PUT_LINNO_LNNO
-#define PUT_LINENO_LNNO(abfd,val, ext) bfd_h_put_16(abfd,val, (bfd_byte *) (ext->l_lnno));
-#endif
+*/
+#include "seclet.h"
+#include "coffswap.h"
\f
/* void warning(); */
CONST char * sec_name AND
flagword sec_flags)
{
- long styp_flags = 0;
-
- if (!strcmp(sec_name, _TEXT)) {
- return((long)STYP_TEXT);
- } else if (!strcmp(sec_name, _DATA)) {
- return((long)STYP_DATA);
- } else if (!strcmp(sec_name, _BSS)) {
- return((long)STYP_BSS);
- }
+ long styp_flags = 0;
+
+ if (!strcmp(sec_name, _TEXT))
+ {
+ styp_flags = STYP_TEXT;
+ }
+ else if (!strcmp(sec_name, _DATA))
+ {
+ styp_flags = STYP_DATA;
+#ifdef TWO_DATA_SECS
+ }
+ else if (!strcmp(sec_name, ".data2"))
+ {
+ styp_flags = STYP_DATA;
+#endif /* TWO_DATA_SECS */
+ }
+ else if (!strcmp(sec_name, _BSS))
+ {
+ styp_flags = STYP_BSS;
+#ifdef _COMMENT
+ }
+ else if (!strcmp(sec_name, _COMMENT))
+ {
+ styp_flags = STYP_INFO;
+#endif /* _COMMENT */
+#ifdef _LIB
+ }
+ else if (!strcmp(sec_name, _LIB))
+ {
+ styp_flags = STYP_LIB;
+#endif /* _LIB */
+#ifdef _LIT
+ }
+ else if (!strcmp (sec_name, _LIT))
+ {
+ styp_flags = STYP_LIT;
+#endif /* _LIT */
-/* Try and figure out what it should be */
- if (sec_flags & SEC_CODE) styp_flags = STYP_TEXT;
- if (sec_flags & SEC_DATA) styp_flags = STYP_DATA;
- else if (sec_flags & SEC_READONLY)
-#ifdef STYP_LIT /* 29k readonly text/data section */
- styp_flags = STYP_LIT;
+ }
+ /* Try and figure out what it should be */
+ else if (sec_flags & SEC_CODE)
+ {
+ styp_flags = STYP_TEXT;
+ }
+ else if (sec_flags & SEC_DATA)
+ {
+ styp_flags = STYP_DATA;
+ }
+ else if (sec_flags & SEC_READONLY)
+ {
+#ifdef STYP_LIT /* 29k readonly text/data section */
+ styp_flags = STYP_LIT;
#else
- styp_flags = STYP_TEXT;
-#endif /* STYP_LIT */
- else if (sec_flags & SEC_LOAD) styp_flags = STYP_TEXT;
+ styp_flags = STYP_TEXT;
+#endif /* STYP_LIT */
+ }
+ else if (sec_flags & SEC_LOAD)
+ {
+ styp_flags = STYP_TEXT;
+ }
+ else {
+ styp_flags = STYP_BSS;
+ }
- if (styp_flags == 0) styp_flags = STYP_BSS;
+#ifdef STYP_NOLOAD
+ if (sec_flags & SEC_NEVER_LOAD)
+ styp_flags |= STYP_NOLOAD;
+#endif
- return(styp_flags);
+ return(styp_flags);
}
/*
* Return a word with SEC_* flags set to represent the incoming
* in sec_to_styp_flags().
*/
static flagword
-DEFUN(styp_to_sec_flags, (styp_flags),
- long styp_flags)
-{
- flagword sec_flags=0;
-
- if ((styp_flags & STYP_TEXT) || (styp_flags & STYP_DATA))
- sec_flags = (SEC_LOAD | SEC_ALLOC);
- else if (styp_flags & STYP_BSS)
- sec_flags = SEC_ALLOC;
-
-#ifdef STYP_LIT /* A29k readonly text/data section type */
- if ((styp_flags & STYP_LIT) == STYP_LIT)
- sec_flags = (SEC_LOAD | SEC_ALLOC | SEC_READONLY);
-#endif /* STYP_LIT */
-
- return(sec_flags);
-}
-
-#define get_index(symbol) ((int) (symbol)->value)
-#define set_index(symbol, idx) ((symbol)->value = (idx))
-
-/* **********************************************************************
-Here are all the routines for swapping the structures seen in the
-outside world into the internal forms.
-*/
-
-
-static void
-DEFUN(bfd_swap_reloc_in,(abfd, reloc_src, reloc_dst),
- bfd *abfd AND
- RELOC *reloc_src AND
- struct internal_reloc *reloc_dst)
-{
- reloc_dst->r_vaddr = bfd_h_get_32(abfd, (bfd_byte *)reloc_src->r_vaddr);
- reloc_dst->r_symndx = bfd_h_get_32(abfd, (bfd_byte *) reloc_src->r_symndx);
-
-#ifdef RS6000COFF_C
- reloc_dst->r_type = bfd_h_get_8(abfd, reloc_src->r_type);
- reloc_dst->r_size = bfd_h_get_8(abfd, reloc_src->r_size);
-#else
- reloc_dst->r_type = bfd_h_get_16(abfd, (bfd_byte *) reloc_src->r_type);
-#endif
-
-#if M88
- reloc_dst->r_offset = bfd_h_get_16(abfd, (bfd_byte *) reloc_src->r_offset);
-#endif
-}
-
-
-static unsigned int
-DEFUN(coff_swap_reloc_out,(abfd, src, dst),
- bfd *abfd AND
- PTR src AND
- PTR dst)
-{
- struct internal_reloc *reloc_src = (struct internal_reloc *)src;
- struct external_reloc *reloc_dst = (struct external_reloc *)dst;
- bfd_h_put_32(abfd, reloc_src->r_vaddr, (bfd_byte *) reloc_dst->r_vaddr);
- bfd_h_put_32(abfd, reloc_src->r_symndx, (bfd_byte *) reloc_dst->r_symndx);
- bfd_h_put_16(abfd, reloc_src->r_type, (bfd_byte *) reloc_dst->r_type);
-#if M88
- bfd_h_put_16(abfd, reloc_src->r_offset, (bfd_byte *) reloc_dst->r_offset);
-#endif
- return sizeof(struct external_reloc);
-}
-
-static void
-DEFUN(bfd_swap_filehdr_in,(abfd, filehdr_src, filehdr_dst),
- bfd *abfd AND
- FILHDR *filehdr_src AND
- struct internal_filehdr *filehdr_dst)
-{
- filehdr_dst->f_magic = bfd_h_get_16(abfd, (bfd_byte *) filehdr_src->f_magic);
- filehdr_dst->f_nscns = bfd_h_get_16(abfd, (bfd_byte *)filehdr_src-> f_nscns);
- filehdr_dst->f_timdat = bfd_h_get_32(abfd, (bfd_byte *)filehdr_src-> f_timdat);
- filehdr_dst->f_symptr = bfd_h_get_32(abfd, (bfd_byte *)filehdr_src-> f_symptr);
- filehdr_dst->f_nsyms = bfd_h_get_32(abfd, (bfd_byte *)filehdr_src-> f_nsyms);
- filehdr_dst->f_opthdr = bfd_h_get_16(abfd, (bfd_byte *)filehdr_src-> f_opthdr);
- filehdr_dst->f_flags = bfd_h_get_16(abfd, (bfd_byte *)filehdr_src-> f_flags);
-}
-
-static unsigned int
-DEFUN(coff_swap_filehdr_out,(abfd, in, out),
- bfd *abfd AND
- PTR in AND
- PTR out)
+DEFUN(styp_to_sec_flags, (abfd, hdr),
+ bfd *abfd AND
+ PTR hdr)
{
- struct internal_filehdr *filehdr_in = (struct internal_filehdr *)in;
- FILHDR *filehdr_out = (FILHDR *)out;
- bfd_h_put_16(abfd, filehdr_in->f_magic, (bfd_byte *) filehdr_out->f_magic);
- bfd_h_put_16(abfd, filehdr_in->f_nscns, (bfd_byte *) filehdr_out->f_nscns);
- bfd_h_put_32(abfd, filehdr_in->f_timdat, (bfd_byte *) filehdr_out->f_timdat);
- bfd_h_put_32(abfd, filehdr_in->f_symptr, (bfd_byte *) filehdr_out->f_symptr);
- bfd_h_put_32(abfd, filehdr_in->f_nsyms, (bfd_byte *) filehdr_out->f_nsyms);
- bfd_h_put_16(abfd, filehdr_in->f_opthdr, (bfd_byte *) filehdr_out->f_opthdr);
- bfd_h_put_16(abfd, filehdr_in->f_flags, (bfd_byte *) filehdr_out->f_flags);
- return sizeof(FILHDR);
-}
-
+ struct internal_scnhdr *internal_s = (struct internal_scnhdr *) hdr;
+ long styp_flags = internal_s->s_flags;
+ flagword sec_flags=0;
-#ifndef NO_COFF_SYMBOLS
-
-static void
-DEFUN(coff_swap_sym_in,(abfd, ext1, in1),
- bfd *abfd AND
- PTR ext1 AND
- PTR in1)
-{
- SYMENT *ext = (SYMENT *)ext1;
- struct internal_syment *in = (struct internal_syment *)in1;
+#ifdef STYP_NOLOAD
+ if (styp_flags & STYP_NOLOAD)
+ {
+ sec_flags |= SEC_NEVER_LOAD;
+ }
+#endif /* STYP_NOLOAD */
- if( ext->e.e_name[0] == 0) {
- in->_n._n_n._n_zeroes = 0;
- in->_n._n_n._n_offset = bfd_h_get_32(abfd, (bfd_byte *) ext->e.e.e_offset);
+ /* For 386 COFF, at least, an unloadable text or data section is
+ actually a shared library section. */
+ if (styp_flags & STYP_TEXT)
+ {
+ if (sec_flags & SEC_NEVER_LOAD)
+ sec_flags |= SEC_CODE | SEC_SHARED_LIBRARY;
+ else
+ sec_flags |= SEC_CODE | SEC_LOAD | SEC_ALLOC;
}
- else {
-#if SYMNMLEN != E_SYMNMLEN
- -> Error, we need to cope with truncating or extending SYMNMLEN!;
-#else
- memcpy(in->_n._n_name, ext->e.e_name, SYMNMLEN);
+ else if (styp_flags & STYP_DATA)
+ {
+ if (sec_flags & SEC_NEVER_LOAD)
+ sec_flags |= SEC_DATA | SEC_SHARED_LIBRARY;
+ else
+ sec_flags |= SEC_DATA | SEC_LOAD | SEC_ALLOC;
+ }
+ else if (styp_flags & STYP_BSS)
+ {
+#ifdef BSS_NOLOAD_IS_SHARED_LIBRARY
+ if (sec_flags & SEC_NEVER_LOAD)
+ sec_flags |= SEC_ALLOC | SEC_SHARED_LIBRARY;
+ else
#endif
+ sec_flags |= SEC_ALLOC;
}
- in->n_value = bfd_h_get_32(abfd, (bfd_byte *) ext->e_value);
- in->n_scnum = bfd_h_get_16(abfd, (bfd_byte *) ext->e_scnum);
- if (sizeof(ext->e_type) == 2){
- in->n_type = bfd_h_get_16(abfd, (bfd_byte *) ext->e_type);
+ else if (styp_flags & STYP_INFO)
+ {
+ /* Nothing to do. */
}
- else {
- in->n_type = bfd_h_get_32(abfd, (bfd_byte *) ext->e_type);
+ else
+ {
+ sec_flags |= SEC_ALLOC | SEC_LOAD;
}
- in->n_sclass = bfd_h_get_8(abfd, ext->e_sclass);
- in->n_numaux = bfd_h_get_8(abfd, ext->e_numaux);
-}
-static unsigned int
-DEFUN(coff_swap_sym_out,(abfd, inp, extp),
- bfd *abfd AND
- PTR inp AND
- PTR extp)
-{
- struct internal_syment *in = (struct internal_syment *)inp;
- SYMENT *ext =(SYMENT *)extp;
- if(in->_n._n_name[0] == 0) {
- bfd_h_put_32(abfd, 0, (bfd_byte *) ext->e.e.e_zeroes);
- bfd_h_put_32(abfd, in->_n._n_n._n_offset, (bfd_byte *) ext->e.e.e_offset);
- }
- else {
-#if SYMNMLEN != E_SYMNMLEN
- -> Error, we need to cope with truncating or extending SYMNMLEN!;
-#else
- memcpy(ext->e.e_name, in->_n._n_name, SYMNMLEN);
-#endif
+#ifdef STYP_LIT /* A29k readonly text/data section type */
+ if ((styp_flags & STYP_LIT) == STYP_LIT)
+ {
+ sec_flags = (SEC_LOAD | SEC_ALLOC | SEC_READONLY);
}
- bfd_h_put_32(abfd, in->n_value , (bfd_byte *) ext->e_value);
- bfd_h_put_16(abfd, in->n_scnum , (bfd_byte *) ext->e_scnum);
- if (sizeof(ext->e_type) == 2)
- {
- bfd_h_put_16(abfd, in->n_type , (bfd_byte *) ext->e_type);
- }
- else
- {
- bfd_h_put_32(abfd, in->n_type , (bfd_byte *) ext->e_type);
- }
- bfd_h_put_8(abfd, in->n_sclass , ext->e_sclass);
- bfd_h_put_8(abfd, in->n_numaux , ext->e_numaux);
- return sizeof(SYMENT);
-}
-
-static void
-DEFUN(coff_swap_aux_in,(abfd, ext1, type, class, in1),
- bfd *abfd AND
- PTR ext1 AND
- int type AND
- int class AND
- PTR in1)
-{
- AUXENT *ext = (AUXENT *)ext1;
- union internal_auxent *in = (union internal_auxent *)in1;
- switch (class) {
- case C_FILE:
- if (ext->x_file.x_fname[0] == 0) {
- in->x_file.x_n.x_zeroes = 0;
- in->x_file.x_n.x_offset =
- bfd_h_get_32(abfd, (bfd_byte *) ext->x_file.x_n.x_offset);
- } else {
-#if FILNMLEN != E_FILNMLEN
- -> Error, we need to cope with truncating or extending FILNMLEN!;
-#else
- memcpy (in->x_file.x_fname, ext->x_file.x_fname, FILNMLEN);
-#endif
- }
- break;
-
- /* RS/6000 "csect" auxents */
-#ifdef RS6000COFF_C
- case C_EXT:
- case C_HIDEXT:
- in->x_csect.x_scnlen = bfd_h_get_32 (abfd, (bfd_byte *) ext->x_csect.x_scnlen);
- in->x_csect.x_parmhash = bfd_h_get_32 (abfd, (bfd_byte *) ext->x_csect.x_parmhash);
- in->x_csect.x_snhash = bfd_h_get_16 (abfd, (bfd_byte *) ext->x_csect.x_snhash);
- /* We don't have to hack bitfields in x_smtyp because it's defined by
- shifts-and-ands, which are equivalent on all byte orders. */
- in->x_csect.x_smtyp = bfd_h_get_8 (abfd, (bfd_byte *) ext->x_csect.x_smtyp);
- in->x_csect.x_smclas = bfd_h_get_8 (abfd, (bfd_byte *) ext->x_csect.x_smclas);
- in->x_csect.x_stab = bfd_h_get_32 (abfd, (bfd_byte *) ext->x_csect.x_stab);
- in->x_csect.x_snstab = bfd_h_get_16 (abfd, (bfd_byte *) ext->x_csect.x_snstab);
- break;
-#endif
-
- case C_STAT:
-#ifdef C_LEAFSTAT
- case C_LEAFSTAT:
-#endif
- case C_HIDDEN:
- if (type == T_NULL) {
- in->x_scn.x_scnlen = GET_SCN_SCNLEN(abfd, ext);
- in->x_scn.x_nreloc = GET_SCN_NRELOC(abfd, ext);
- in->x_scn.x_nlinno = GET_SCN_NLINNO(abfd, ext);
- break;
- }
- default:
- in->x_sym.x_tagndx.l = bfd_h_get_32(abfd, (bfd_byte *) ext->x_sym.x_tagndx);
-#ifndef NO_TVNDX
- in->x_sym.x_tvndx = bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_tvndx);
-#endif
-
- if (ISARY(type) || class == C_BLOCK) {
-#if DIMNUM != E_DIMNUM
- -> Error, we need to cope with truncating or extending DIMNUM!;
-#else
- in->x_sym.x_fcnary.x_ary.x_dimen[0] = bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_fcnary.x_ary.x_dimen[0]);
- in->x_sym.x_fcnary.x_ary.x_dimen[1] = bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_fcnary.x_ary.x_dimen[1]);
- in->x_sym.x_fcnary.x_ary.x_dimen[2] = bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_fcnary.x_ary.x_dimen[2]);
- in->x_sym.x_fcnary.x_ary.x_dimen[3] = bfd_h_get_16(abfd, (bfd_byte *) ext->x_sym.x_fcnary.x_ary.x_dimen[3]);
-#endif
- }
- in->x_sym.x_fcnary.x_fcn.x_lnnoptr = GET_FCN_LNNOPTR(abfd, ext);
- in->x_sym.x_fcnary.x_fcn.x_endndx.l = GET_FCN_ENDNDX(abfd, ext);
-
- if (ISFCN(type)) {
- in->x_sym.x_misc.x_fsize = bfd_h_get_32(abfd, (bfd_byte *) ext->x_sym.x_misc.x_fsize);
- }
- else {
- in->x_sym.x_misc.x_lnsz.x_lnno = GET_LNSZ_LNNO(abfd, ext);
- in->x_sym.x_misc.x_lnsz.x_size = GET_LNSZ_SIZE(abfd, ext);
- }
+#endif /* STYP_LIT */
+#ifdef STYP_OTHER_LOAD /* Other loaded sections */
+ if (styp_flags & STYP_OTHER_LOAD)
+ {
+ sec_flags = (SEC_LOAD | SEC_ALLOC);
}
-}
-
-static unsigned int
-DEFUN(coff_swap_aux_out,(abfd, inp, type, class, extp),
- bfd *abfd AND
- PTR inp AND
- int type AND
- int class AND
- PTR extp)
-{
- union internal_auxent *in = (union internal_auxent *)inp;
- AUXENT *ext = (AUXENT *)extp;
- switch (class) {
- case C_FILE:
- if (in->x_file.x_fname[0] == 0) {
- PUTWORD(abfd, 0, (bfd_byte *) ext->x_file.x_n.x_zeroes);
- PUTWORD(abfd,
- in->x_file.x_n.x_offset,
- (bfd_byte *) ext->x_file.x_n.x_offset);
- }
- else {
-#if FILNMLEN != E_FILNMLEN
- -> Error, we need to cope with truncating or extending FILNMLEN!;
-#else
- memcpy (ext->x_file.x_fname, in->x_file.x_fname, FILNMLEN);
-#endif
- }
- break;
-
-#ifdef RS6000COFF_C
- /* RS/6000 "csect" auxents */
- case C_EXT:
- case C_HIDEXT:
- PUTWORD (abfd, in->x_csect.x_scnlen, ext->x_csect.x_scnlen);
- PUTWORD (abfd, in->x_csect.x_parmhash, ext->x_csect.x_parmhash);
- PUTHALF (abfd, in->x_csect.x_snhash, ext->x_csect.x_snhash);
- /* We don't have to hack bitfields in x_smtyp because it's defined by
- shifts-and-ands, which are equivalent on all byte orders. */
- PUTBYTE (abfd, in->x_csect.x_smtyp, ext->x_csect.x_smtyp);
- PUTBYTE (abfd, in->x_csect.x_smclas, ext->x_csect.x_smclas);
- PUTWORD (abfd, in->x_csect.x_stab, ext->x_csect.x_stab);
- PUTHALF (abfd, in->x_csect.x_snstab, ext->x_csect.x_snstab);
- break;
-#endif
-
- case C_STAT:
-#ifdef C_LEAFSTAT
- case C_LEAFSTAT:
-#endif
- case C_HIDDEN:
- if (type == T_NULL) {
- PUT_SCN_SCNLEN(abfd, in->x_scn.x_scnlen, ext);
- PUT_SCN_NRELOC(abfd, in->x_scn.x_nreloc, ext);
- PUT_SCN_NLINNO(abfd, in->x_scn.x_nlinno, ext);
- break;
- }
- default:
- PUTWORD(abfd, in->x_sym.x_tagndx.l, (bfd_byte *) ext->x_sym.x_tagndx);
-#ifndef NO_TVNDX
- PUTWORD(abfd, in->x_sym.x_tvndx , (bfd_byte *) ext->x_sym.x_tvndx);
-#endif
-
- if (ISFCN(type)) {
- PUTWORD(abfd, in->x_sym.x_misc.x_fsize, (bfd_byte *) ext->x_sym.x_misc.x_fsize);
- PUT_FCN_LNNOPTR(abfd, in->x_sym.x_fcnary.x_fcn.x_lnnoptr, ext);
- PUT_FCN_ENDNDX(abfd, in->x_sym.x_fcnary.x_fcn.x_endndx.l, ext);
- }
- else {
-
- if (ISARY(type) || class == C_BLOCK) {
-#if DIMNUM != E_DIMNUM
- -> Error, we need to cope with truncating or extending DIMNUM!;
-#else
- bfd_h_put_16(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[0], (bfd_byte *)ext->x_sym.x_fcnary.x_ary.x_dimen[0]);
- bfd_h_put_16(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[1], (bfd_byte *)ext->x_sym.x_fcnary.x_ary.x_dimen[1]);
- bfd_h_put_16(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[2], (bfd_byte *)ext->x_sym.x_fcnary.x_ary.x_dimen[2]);
- bfd_h_put_16(abfd, in->x_sym.x_fcnary.x_ary.x_dimen[3], (bfd_byte *)ext->x_sym.x_fcnary.x_ary.x_dimen[3]);
-#endif
- }
- PUT_LNSZ_LNNO(abfd, in->x_sym.x_misc.x_lnsz.x_lnno, ext);
- PUT_LNSZ_SIZE(abfd, in->x_sym.x_misc.x_lnsz.x_size, ext);
-
- PUT_FCN_LNNOPTR(abfd, in->x_sym.x_fcnary.x_fcn.x_lnnoptr, ext);
- PUT_FCN_ENDNDX(abfd, in->x_sym.x_fcnary.x_fcn.x_endndx.l, ext);
+#endif /* STYP_SDATA */
-
- }
- }
-return sizeof(AUXENT);
+ return(sec_flags);
}
-#endif /* NO_COFF_SYMBOLS */
-
-#ifndef NO_COFF_LINENOS
+#define get_index(symbol) ((int) (symbol)->udata)
-static void
-DEFUN(coff_swap_lineno_in,(abfd, ext1, in1),
- bfd *abfd AND
- PTR ext1 AND
- PTR in1)
-{
- LINENO *ext = (LINENO *)ext1;
- struct internal_lineno *in = (struct internal_lineno *)in1;
+/*
+INTERNAL_DEFINITION
+ bfd_coff_backend_data
+
+CODE_FRAGMENT
+
+Special entry points for gdb to swap in coff symbol table parts
+.typedef struct
+.{
+. void (*_bfd_coff_swap_aux_in) PARAMS ((
+. bfd *abfd ,
+. PTR ext,
+. int type,
+. int class ,
+. PTR in));
+.
+. void (*_bfd_coff_swap_sym_in) PARAMS ((
+. bfd *abfd ,
+. PTR ext,
+. PTR in));
+.
+. void (*_bfd_coff_swap_lineno_in) PARAMS ((
+. bfd *abfd,
+. PTR ext,
+. PTR in));
+.
+
+Special entry points for gas to swap coff parts
+
+. unsigned int (*_bfd_coff_swap_aux_out) PARAMS ((
+. bfd *abfd,
+. PTR in,
+. int type,
+. int class,
+. PTR ext));
+.
+. unsigned int (*_bfd_coff_swap_sym_out) PARAMS ((
+. bfd *abfd,
+. PTR in,
+. PTR ext));
+.
+. unsigned int (*_bfd_coff_swap_lineno_out) PARAMS ((
+. bfd *abfd,
+. PTR in,
+. PTR ext));
+.
+. unsigned int (*_bfd_coff_swap_reloc_out) PARAMS ((
+. bfd *abfd,
+. PTR src,
+. PTR dst));
+.
+. unsigned int (*_bfd_coff_swap_filehdr_out) PARAMS ((
+. bfd *abfd,
+. PTR in,
+. PTR out));
+.
+. unsigned int (*_bfd_coff_swap_aouthdr_out) PARAMS ((
+. bfd *abfd,
+. PTR in,
+. PTR out));
+.
+. unsigned int (*_bfd_coff_swap_scnhdr_out) PARAMS ((
+. bfd *abfd,
+. PTR in,
+. PTR out));
+.
+
+Special entry points for generic COFF routines to call target
+dependent COFF routines
+
+. unsigned int _bfd_filhsz;
+. unsigned int _bfd_aoutsz;
+. unsigned int _bfd_scnhsz;
+. unsigned int _bfd_symesz;
+. unsigned int _bfd_auxesz;
+. unsigned int _bfd_linesz;
+. boolean _bfd_coff_long_filenames;
+. void (*_bfd_coff_swap_filehdr_in) PARAMS ((
+. bfd *abfd,
+. PTR ext,
+. PTR in));
+. void (*_bfd_coff_swap_aouthdr_in) PARAMS ((
+. bfd *abfd,
+. PTR ext,
+. PTR in));
+. void (*_bfd_coff_swap_scnhdr_in) PARAMS ((
+. bfd *abfd,
+. PTR ext,
+. PTR in));
+. boolean (*_bfd_coff_bad_format_hook) PARAMS ((
+. bfd *abfd,
+. PTR internal_filehdr));
+. boolean (*_bfd_coff_set_arch_mach_hook) PARAMS ((
+. bfd *abfd,
+. PTR internal_filehdr));
+. PTR (*_bfd_coff_mkobject_hook) PARAMS ((
+. bfd *abfd,
+. PTR internal_filehdr,
+. PTR internal_aouthdr));
+. flagword (*_bfd_styp_to_sec_flags_hook) PARAMS ((
+. bfd *abfd,
+. PTR internal_scnhdr));
+. asection *(*_bfd_make_section_hook) PARAMS ((
+. bfd *abfd,
+. char *name));
+. void (*_bfd_set_alignment_hook) PARAMS ((
+. bfd *abfd,
+. asection *sec,
+. PTR internal_scnhdr));
+. boolean (*_bfd_coff_slurp_symbol_table) PARAMS ((
+. bfd *abfd));
+. boolean (*_bfd_coff_symname_in_debug) PARAMS ((
+. bfd *abfd,
+. struct internal_syment *sym));
+. void (*_bfd_coff_reloc16_extra_cases) PARAMS ((
+. bfd *abfd,
+. struct bfd_seclet *seclet,
+. arelent *reloc,
+. bfd_byte *data,
+. unsigned int *src_ptr,
+. unsigned int *dst_ptr));
+.} bfd_coff_backend_data;
+.
+.#define coff_backend_info(abfd) ((bfd_coff_backend_data *) (abfd)->xvec->backend_data)
+.
+.#define bfd_coff_swap_aux_in(a,e,t,c,i) \
+. ((coff_backend_info (a)->_bfd_coff_swap_aux_in) (a,e,t,c,i))
+.
+.#define bfd_coff_swap_sym_in(a,e,i) \
+. ((coff_backend_info (a)->_bfd_coff_swap_sym_in) (a,e,i))
+.
+.#define bfd_coff_swap_lineno_in(a,e,i) \
+. ((coff_backend_info ( a)->_bfd_coff_swap_lineno_in) (a,e,i))
+.
+.#define bfd_coff_swap_reloc_out(abfd, i, o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_reloc_out) (abfd, i, o))
+.
+.#define bfd_coff_swap_lineno_out(abfd, i, o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_lineno_out) (abfd, i, o))
+.
+.#define bfd_coff_swap_aux_out(abfd, i, t,c,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_aux_out) (abfd, i,t,c, o))
+.
+.#define bfd_coff_swap_sym_out(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_sym_out) (abfd, i, o))
+.
+.#define bfd_coff_swap_scnhdr_out(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_scnhdr_out) (abfd, i, o))
+.
+.#define bfd_coff_swap_filehdr_out(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_filehdr_out) (abfd, i, o))
+.
+.#define bfd_coff_swap_aouthdr_out(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_aouthdr_out) (abfd, i, o))
+.
+.#define bfd_coff_filhsz(abfd) (coff_backend_info (abfd)->_bfd_filhsz)
+.#define bfd_coff_aoutsz(abfd) (coff_backend_info (abfd)->_bfd_aoutsz)
+.#define bfd_coff_scnhsz(abfd) (coff_backend_info (abfd)->_bfd_scnhsz)
+.#define bfd_coff_symesz(abfd) (coff_backend_info (abfd)->_bfd_symesz)
+.#define bfd_coff_auxesz(abfd) (coff_backend_info (abfd)->_bfd_auxesz)
+.#define bfd_coff_linesz(abfd) (coff_backend_info (abfd)->_bfd_linesz)
+.#define bfd_coff_long_filenames(abfd) (coff_backend_info (abfd)->_bfd_coff_long_filenames)
+.#define bfd_coff_swap_filehdr_in(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_filehdr_in) (abfd, i, o))
+.
+.#define bfd_coff_swap_aouthdr_in(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_aouthdr_in) (abfd, i, o))
+.
+.#define bfd_coff_swap_scnhdr_in(abfd, i,o) \
+. ((coff_backend_info (abfd)->_bfd_coff_swap_scnhdr_in) (abfd, i, o))
+.
+.#define bfd_coff_bad_format_hook(abfd, filehdr) \
+. ((coff_backend_info (abfd)->_bfd_coff_bad_format_hook) (abfd, filehdr))
+.
+.#define bfd_coff_set_arch_mach_hook(abfd, filehdr)\
+. ((coff_backend_info (abfd)->_bfd_coff_set_arch_mach_hook) (abfd, filehdr))
+.#define bfd_coff_mkobject_hook(abfd, filehdr, aouthdr)\
+. ((coff_backend_info (abfd)->_bfd_coff_mkobject_hook) (abfd, filehdr, aouthdr))
+.
+.#define bfd_coff_styp_to_sec_flags_hook(abfd, scnhdr)\
+. ((coff_backend_info (abfd)->_bfd_styp_to_sec_flags_hook) (abfd, scnhdr))
+.
+.#define bfd_coff_make_section_hook(abfd, name)\
+. ((coff_backend_info (abfd)->_bfd_make_section_hook) (abfd, name))
+.
+.#define bfd_coff_set_alignment_hook(abfd, sec, scnhdr)\
+. ((coff_backend_info (abfd)->_bfd_set_alignment_hook) (abfd, sec, scnhdr))
+.
+.#define bfd_coff_slurp_symbol_table(abfd)\
+. ((coff_backend_info (abfd)->_bfd_coff_slurp_symbol_table) (abfd))
+.
+.#define bfd_coff_symname_in_debug(abfd, sym)\
+. ((coff_backend_info (abfd)->_bfd_coff_symname_in_debug) (abfd, sym))
+.
+.#define bfd_coff_reloc16_extra_cases(abfd, seclet, reloc, data, src_ptr, dst_ptr)\
+. ((coff_backend_info (abfd)->_bfd_coff_reloc16_extra_cases)\
+. (abfd, seclet, reloc, data, src_ptr, dst_ptr))
+.
+*/
- in->l_addr.l_symndx = bfd_h_get_32(abfd, (bfd_byte *) ext->l_addr.l_symndx);
- in->l_lnno = GET_LINENO_LNNO(abfd, ext);
-}
+/* See whether the magic number matches. */
-static unsigned int
-DEFUN(coff_swap_lineno_out,(abfd, inp, outp),
- bfd *abfd AND
- PTR inp AND
- PTR outp)
+static boolean
+DEFUN(coff_bad_format_hook, (abfd, filehdr),
+ bfd *abfd AND
+ PTR filehdr)
{
- struct internal_lineno *in = (struct internal_lineno *)inp;
- struct external_lineno *ext = (struct external_lineno *)outp;
- PUTWORD(abfd, in->l_addr.l_symndx, (bfd_byte *)
- ext->l_addr.l_symndx);
-
- PUT_LINENO_LNNO (abfd, in->l_lnno, ext);
- return sizeof(struct external_lineno);
-}
-
-#endif /* NO_COFF_LINENOS */
+ struct internal_filehdr *internal_f = (struct internal_filehdr *) filehdr;
+ if (BADMAG (*internal_f))
+ return false;
-static void
-DEFUN(bfd_swap_aouthdr_in,(abfd, aouthdr_ext1, aouthdr_int1),
- bfd *abfd AND
- PTR aouthdr_ext1 AND
- PTR aouthdr_int1)
-{
- AOUTHDR *aouthdr_ext = (AOUTHDR *) aouthdr_ext1;
- struct internal_aouthdr *aouthdr_int = (struct internal_aouthdr *)aouthdr_int1;
-
- aouthdr_int->magic = bfd_h_get_16(abfd, (bfd_byte *) aouthdr_ext->magic);
- aouthdr_int->vstamp = bfd_h_get_16(abfd, (bfd_byte *) aouthdr_ext->vstamp);
- aouthdr_int->tsize = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->tsize);
- aouthdr_int->dsize = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->dsize);
- aouthdr_int->bsize = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->bsize);
- aouthdr_int->entry = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->entry);
- aouthdr_int->text_start = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->text_start);
- aouthdr_int->data_start = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->data_start);
-#ifdef I960
- aouthdr_int->tagentries = bfd_h_get_32(abfd, (bfd_byte *) aouthdr_ext->tagentries);
-#endif
+ /* if the optional header is NULL or not the correct size then
+ quit; the only difference I can see between m88k dgux headers (MC88DMAGIC)
+ and Intel 960 readwrite headers (I960WRMAGIC) is that the
+ optional header is of a different size.
-#ifdef RS6000COFF_C
- aouthdr_int->o_toc = bfd_h_get_32(abfd, aouthdr_ext->o_toc);
- aouthdr_int->o_snentry = bfd_h_get_16(abfd, aouthdr_ext->o_snentry);
- aouthdr_int->o_sntext = bfd_h_get_16(abfd, aouthdr_ext->o_sntext);
- aouthdr_int->o_sndata = bfd_h_get_16(abfd, aouthdr_ext->o_sndata);
- aouthdr_int->o_sntoc = bfd_h_get_16(abfd, aouthdr_ext->o_sntoc);
- aouthdr_int->o_snloader = bfd_h_get_16(abfd, aouthdr_ext->o_snloader);
- aouthdr_int->o_snbss = bfd_h_get_16(abfd, aouthdr_ext->o_snbss);
- aouthdr_int->o_algntext = bfd_h_get_16(abfd, aouthdr_ext->o_algntext);
- aouthdr_int->o_algndata = bfd_h_get_16(abfd, aouthdr_ext->o_algndata);
- aouthdr_int->o_modtype = bfd_h_get_16(abfd, aouthdr_ext->o_modtype);
- aouthdr_int->o_maxstack = bfd_h_get_32(abfd, aouthdr_ext->o_maxstack);
-#endif
-}
+ But the mips keeps extra stuff in it's opthdr, so dont check
+ when doing that
+ */
-static unsigned int
-DEFUN(coff_swap_aouthdr_out,(abfd, in, out),
- bfd *abfd AND
- PTR in AND
- PTR out)
-{
- struct internal_aouthdr *aouthdr_in = (struct internal_aouthdr *)in;
- AOUTHDR *aouthdr_out = (AOUTHDR *)out;
- bfd_h_put_16(abfd, aouthdr_in->magic, (bfd_byte *) aouthdr_out->magic);
- bfd_h_put_16(abfd, aouthdr_in->vstamp, (bfd_byte *) aouthdr_out->vstamp);
- bfd_h_put_32(abfd, aouthdr_in->tsize, (bfd_byte *) aouthdr_out->tsize);
- bfd_h_put_32(abfd, aouthdr_in->dsize, (bfd_byte *) aouthdr_out->dsize);
- bfd_h_put_32(abfd, aouthdr_in->bsize, (bfd_byte *) aouthdr_out->bsize);
- bfd_h_put_32(abfd, aouthdr_in->entry, (bfd_byte *) aouthdr_out->entry);
- bfd_h_put_32(abfd, aouthdr_in->text_start,
- (bfd_byte *) aouthdr_out->text_start);
- bfd_h_put_32(abfd, aouthdr_in->data_start, (bfd_byte *) aouthdr_out->data_start);
-#ifdef I960
- bfd_h_put_32(abfd, aouthdr_in->tagentries, (bfd_byte *) aouthdr_out->tagentries);
+#if defined(M88) || defined(I960)
+ if (internal_f->f_opthdr != 0 && AOUTSZ != internal_f->f_opthdr)
+ return false;
#endif
- return sizeof(AOUTHDR);
-}
-static void
-DEFUN(coff_swap_scnhdr_in,(abfd, scnhdr_ext, scnhdr_int),
- bfd *abfd AND
- SCNHDR *scnhdr_ext AND
- struct internal_scnhdr *scnhdr_int)
-{
- memcpy(scnhdr_int->s_name, scnhdr_ext->s_name, sizeof(scnhdr_int->s_name));
- scnhdr_int->s_vaddr = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_vaddr);
- scnhdr_int->s_paddr = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_paddr);
- scnhdr_int->s_size = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_size);
- scnhdr_int->s_scnptr = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_scnptr);
- scnhdr_int->s_relptr = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_relptr);
- scnhdr_int->s_lnnoptr = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_lnnoptr);
- scnhdr_int->s_flags = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_flags);
-#if defined(M88)
- scnhdr_int->s_nreloc = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_nreloc);
- scnhdr_int->s_nlnno = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_nlnno);
-#else
- scnhdr_int->s_nreloc = bfd_h_get_16(abfd, (bfd_byte *) scnhdr_ext->s_nreloc);
- scnhdr_int->s_nlnno = bfd_h_get_16(abfd, (bfd_byte *) scnhdr_ext->s_nlnno);
-#endif
-#ifdef I960
- scnhdr_int->s_align = bfd_h_get_32(abfd, (bfd_byte *) scnhdr_ext->s_align);
-#endif
+ return true;
}
-static unsigned int
-DEFUN(coff_swap_scnhdr_out,(abfd, in, out),
- bfd *abfd AND
- PTR in AND
- PTR out)
+static asection *
+DEFUN (coff_make_section_hook, (abfd, name),
+ bfd *abfd AND
+ char *name)
{
- struct internal_scnhdr *scnhdr_int = (struct internal_scnhdr *)in;
- SCNHDR *scnhdr_ext = (SCNHDR *)out;
- memcpy(scnhdr_ext->s_name, scnhdr_int->s_name, sizeof(scnhdr_int->s_name));
- PUTWORD(abfd, scnhdr_int->s_vaddr, (bfd_byte *) scnhdr_ext->s_vaddr);
- PUTWORD(abfd, scnhdr_int->s_paddr, (bfd_byte *) scnhdr_ext->s_paddr);
- PUTWORD(abfd, scnhdr_int->s_size, (bfd_byte *) scnhdr_ext->s_size);
- PUTWORD(abfd, scnhdr_int->s_scnptr, (bfd_byte *) scnhdr_ext->s_scnptr);
- PUTWORD(abfd, scnhdr_int->s_relptr, (bfd_byte *) scnhdr_ext->s_relptr);
- PUTWORD(abfd, scnhdr_int->s_lnnoptr, (bfd_byte *) scnhdr_ext->s_lnnoptr);
- PUTWORD(abfd, scnhdr_int->s_flags, (bfd_byte *) scnhdr_ext->s_flags);
-#if defined(M88)
- PUTWORD(abfd, scnhdr_int->s_nlnno, (bfd_byte *) scnhdr_ext->s_nlnno);
- PUTWORD(abfd, scnhdr_int->s_nreloc, (bfd_byte *) scnhdr_ext->s_nreloc);
-#else
- PUTHALF(abfd, scnhdr_int->s_nlnno, (bfd_byte *) scnhdr_ext->s_nlnno);
- PUTHALF(abfd, scnhdr_int->s_nreloc, (bfd_byte *) scnhdr_ext->s_nreloc);
-#endif
-
-#if defined(I960)
- PUTWORD(abfd, scnhdr_int->s_align, (bfd_byte *) scnhdr_ext->s_align);
+#ifdef TWO_DATA_SECS
+ /* On SCO a file created by the Microsoft assembler can have two
+ .data sections. We use .data2 for the second one. */
+ if (strcmp (name, _DATA) == 0)
+ return bfd_make_section (abfd, ".data2");
#endif
- return sizeof(SCNHDR);
+ return (asection *) NULL;
}
-
/*
initialize a section structure with information peculiar to this
particular implementation of coff
*/
-static boolean
-DEFUN(coff_new_section_hook,(abfd_ignore, section_ignore),
- bfd *abfd_ignore AND
- asection *section_ignore)
+static boolean
+DEFUN(coff_new_section_hook,(abfd, section),
+ bfd *abfd AND
+ asection *section)
{
- section_ignore->alignment_power = abfd_ignore->xvec->align_power_min;
+ section->alignment_power = abfd->xvec->align_power_min;
+ /* Allocate aux records for section symbols, to store size and
+ related info.
+
+ @@ Shouldn't use constant multiplier here! */
+ coffsymbol (section->symbol)->native =
+ (combined_entry_type *) bfd_zalloc (abfd,
+ sizeof (combined_entry_type) * 10);
return true;
}
-/* Take a section header read from a coff file (in HOST byte order),
- and make a BFD "section" out of it. */
-static boolean
-DEFUN(make_a_section_from_file,(abfd, hdr),
- bfd *abfd AND
- struct internal_scnhdr *hdr)
-{
- asection *return_section;
- {
- /* Assorted wastage to null-terminate the name, thanks AT&T! */
- char *name = bfd_alloc(abfd, sizeof (hdr->s_name)+1);
- if (name == NULL) {
- bfd_error = no_memory;
- return false;
- }
- strncpy(name, (char *) &hdr->s_name[0], sizeof (hdr->s_name));
- name[sizeof (hdr->s_name)] = 0;
-
- return_section = bfd_make_section(abfd, name);
- if (return_section == NULL)
- return false;
- }
-
- /* s_paddr is presumed to be = to s_vaddr */
-#define assign(to, from) return_section->to = hdr->from
- assign(vma, s_vaddr);
- /* assign (vma, s_vaddr); */
- assign(size, s_size);
- assign(filepos, s_scnptr);
- assign(rel_filepos, s_relptr);
- assign(reloc_count, s_nreloc);
#ifdef I960
- {
- /* FIXME, use a temp var rather than alignment_power */
- assign(alignment_power, s_align);
- {
- unsigned int i;
- for (i = 0; i < 32; i++) {
- if ((1 << i) >= (int) (return_section->alignment_power)) {
- return_section->alignment_power = i;
- break;
- }
- }
- }
- }
-#endif
- assign(line_filepos, s_lnnoptr);
- /*
- return_section->linesize = hdr->s_nlnno * sizeof (struct lineno);
- */
- return_section->lineno_count = hdr->s_nlnno;
- return_section->userdata = NULL;
- return_section->next = (asection *) NULL;
- return_section->flags = styp_to_sec_flags(hdr->s_flags);
+/* Set the alignment of a BFD section. */
+static void
+DEFUN (coff_set_alignment_hook, (abfd, section, scnhdr),
+ bfd *abfd AND
+ asection *section AND
+ PTR scnhdr)
+{
+ struct internal_scnhdr *hdr = (struct internal_scnhdr *) scnhdr;
+ unsigned int i;
- if (hdr->s_nreloc != 0)
- return_section->flags |= SEC_RELOC;
- /* FIXME: should this check 'hdr->s_size > 0' */
- if (hdr->s_scnptr != 0)
- return_section->flags |= SEC_HAS_CONTENTS;
- return true;
+ for (i = 0; i < 32; i++)
+ if ((1 << i) >= hdr->s_align)
+ break;
+ section->alignment_power = i;
}
+
+#else /* ! I960 */
+
+#define coff_set_alignment_hook \
+ ((void (*) PARAMS ((bfd *, asection *, PTR))) bfd_void)
+
+#endif /* ! I960 */
+
static boolean
DEFUN(coff_mkobject,(abfd),
bfd *abfd)
{
- set_tdata (abfd, bfd_zalloc (abfd,sizeof(coff_data_type)));
- if (coff_data(abfd) == 0) {
+ coff_data_type *coff;
+
+ abfd->tdata.coff_obj_data = (struct coff_tdata *)bfd_zalloc (abfd,sizeof(coff_data_type));
+ if (abfd->tdata.coff_obj_data == 0){
bfd_error = no_memory;
return false;
}
- coff_data(abfd)->relocbase = 0;
+ coff = coff_data (abfd);
+ coff->symbols = (coff_symbol_type *) NULL;
+ coff->conversion_table = (unsigned int *) NULL;
+ coff->raw_syments = (struct coff_ptr_struct *) NULL;
+ coff->raw_linenos = (struct lineno *) NULL;
+ coff->relocbase = 0;
+/* make_abs_section(abfd);*/
return true;
}
-static
-bfd_target *
-DEFUN(coff_real_object_p,(abfd, nscns, internal_f, internal_a),
- bfd *abfd AND
- unsigned nscns AND
- struct internal_filehdr *internal_f AND
- struct internal_aouthdr *internal_a)
+/* Create the COFF backend specific information. */
+
+static PTR
+DEFUN(coff_mkobject_hook,(abfd, filehdr, aouthdr),
+ bfd *abfd AND
+ PTR filehdr AND
+ PTR aouthdr)
{
+ struct internal_filehdr *internal_f = (struct internal_filehdr *) filehdr;
coff_data_type *coff;
- enum bfd_architecture arch;
- long machine;
- size_t readsize; /* length of file_info */
- SCNHDR *external_sections;
- /* Build a play area */
- if (coff_mkobject(abfd) != true)
- return 0;
- coff = coff_data(abfd);
+ if (coff_mkobject (abfd) == false)
+ return NULL;
+ coff = coff_data (abfd);
- external_sections = (SCNHDR *)bfd_alloc(abfd, readsize = (nscns * SCNHSZ));
+ coff->sym_filepos = internal_f->f_symptr;
+ coff->flags = internal_f->f_flags;
- if (bfd_read((PTR)external_sections, 1, readsize, abfd) != readsize) {
- goto fail;
- }
+ /* These members communicate important constants about the symbol
+ table to GDB's symbol-reading code. These `constants'
+ unfortunately vary among coff implementations... */
+ coff->local_n_btmask = N_BTMASK;
+ coff->local_n_btshft = N_BTSHFT;
+ coff->local_n_tmask = N_TMASK;
+ coff->local_n_tshift = N_TSHIFT;
+ coff->local_symesz = SYMESZ;
+ coff->local_auxesz = AUXESZ;
+ coff->local_linesz = LINESZ;
+ return (PTR) coff;
+}
- /* Now copy data as required; construct all asections etc */
- coff->symbol_index_slew = 0;
- coff->relocbase =0;
- coff->raw_syment_count = 0;
- coff->raw_linenos = 0;
- coff->raw_syments = 0;
- coff->sym_filepos =0;
- coff->flags = internal_f->f_flags;
- if (nscns != 0) {
- unsigned int i;
- for (i = 0; i < nscns; i++) {
- struct internal_scnhdr tmp;
- coff_swap_scnhdr_in(abfd, external_sections + i, &tmp);
- make_a_section_from_file(abfd,&tmp);
- }
- }
- /* Determine the machine architecture and type. */
-machine = 0;
+/* Determine the machine architecture and type. FIXME: This is target
+ dependent because the magic numbers are defined in the target
+ dependent header files. But there is no particular need for this.
+ If the magic numbers were moved to a separate file, this function
+ would be target independent and would also be much more successful
+ at linking together COFF files for different architectures. */
+
+static boolean
+DEFUN (coff_set_arch_mach_hook, (abfd, filehdr),
+ bfd *abfd AND
+ PTR filehdr)
+{
+ long machine;
+ enum bfd_architecture arch;
+ struct internal_filehdr *internal_f = (struct internal_filehdr *) filehdr;
+
+ machine = 0;
switch (internal_f->f_magic) {
#ifdef I386MAGIC
case I386MAGIC:
+#ifdef I386AIXMAGIC
+ case I386AIXMAGIC: /* Danbury PS/2 AIX C Compiler */
+#endif
arch = bfd_arch_i386;
machine = 0;
break;
break;
#endif
-#ifdef MIPS
- case MIPS_MAGIC_1:
- case MIPS_MAGIC_2:
- case MIPS_MAGIC_3:
- arch = bfd_arch_mips;
- machine = 0;
- break;
-#endif
-
#ifdef MC68MAGIC
case MC68MAGIC:
case M68MAGIC:
machine = 88100;
break;
#endif
-#ifdef I960
-#ifdef I960ROMAGIC
- case I960ROMAGIC:
- case I960RWMAGIC:
- arch = bfd_arch_i960;
- switch (F_I960TYPE & internal_f->f_flags)
- {
- default:
- case F_I960CORE:
- machine = bfd_mach_i960_core;
- break;
- case F_I960KB:
- machine = bfd_mach_i960_kb_sb;
- break;
- case F_I960MC:
- machine = bfd_mach_i960_mc;
- break;
- case F_I960XA:
- machine = bfd_mach_i960_xa;
- break;
- case F_I960CA:
- machine = bfd_mach_i960_ca;
- break;
- case F_I960KA:
- machine = bfd_mach_i960_ka_sa;
- break;
- }
- break;
-#endif
-#endif
-
-#ifdef U802ROMAGIC
- case U802ROMAGIC:
- case U802WRMAGIC:
- case U802TOCMAGIC:
- arch = bfd_arch_rs6000;
- machine = 6000;
- break;
-#endif
-
-
- default: /* Unreadable input file type */
- arch = bfd_arch_obscure;
- break;
- }
-
- bfd_default_set_arch_mach(abfd, arch, machine);
- if (!(internal_f->f_flags & F_RELFLG))
- abfd->flags |= HAS_RELOC;
- if ((internal_f->f_flags & F_EXEC))
- abfd->flags |= EXEC_P;
- if (!(internal_f->f_flags & F_LNNO))
- abfd->flags |= HAS_LINENO;
- if (!(internal_f->f_flags & F_LSYMS))
- abfd->flags |= HAS_LOCALS;
-
-
- bfd_get_symcount(abfd) = internal_f->f_nsyms;
- if (internal_f->f_nsyms)
- abfd->flags |= HAS_SYMS;
-
- coff->sym_filepos = internal_f->f_symptr;
-
- /* These members communicate important constants about the symbol table
- to GDB's symbol-reading code. These `constants' unfortunately vary
- from coff implementation to implementation... */
-#ifndef NO_COFF_SYMBOLS
- coff->local_n_btmask = N_BTMASK;
- coff->local_n_btshft = N_BTSHFT;
- coff->local_n_tmask = N_TMASK;
- coff->local_n_tshift = N_TSHIFT;
- coff->local_symesz = SYMESZ;
- coff->local_auxesz = AUXESZ;
- coff->local_linesz = LINESZ;
-#endif
-
- coff->symbols = (coff_symbol_type *) NULL;
- bfd_get_start_address(abfd) = internal_f->f_opthdr ? internal_a->entry : 0;
-
- return abfd->xvec;
- fail:
- bfd_release(abfd, coff);
- return (bfd_target *)NULL;
-}
-
-static bfd_target *
-DEFUN(coff_object_p,(abfd),
- bfd *abfd)
-{
- int nscns;
- FILHDR filehdr;
- AOUTHDR opthdr;
- struct internal_filehdr internal_f;
- struct internal_aouthdr internal_a;
-
- bfd_error = system_call_error;
-
- /* figure out how much to read */
- if (bfd_read((PTR) &filehdr, 1, FILHSZ, abfd) != FILHSZ)
- return 0;
-
- bfd_swap_filehdr_in(abfd, &filehdr, &internal_f);
-
- if (BADMAG(internal_f)) {
- bfd_error = wrong_format;
- return 0;
- }
- nscns =internal_f.f_nscns;
-
- if (internal_f.f_opthdr) {
- if (bfd_read((PTR) &opthdr, 1,AOUTSZ, abfd) != AOUTSZ) {
- return 0;
- }
- bfd_swap_aouthdr_in(abfd, (char *)&opthdr, (char *)&internal_a);
- }
-
- /* Seek past the opt hdr stuff */
- bfd_seek(abfd, internal_f.f_opthdr + FILHSZ, SEEK_SET);
-
- /* if the optional header is NULL or not the correct size then
- quit; the only difference I can see between m88k dgux headers (MC88DMAGIC)
- and Intel 960 readwrite headers (I960WRMAGIC) is that the
- optional header is of a different size.
-
- But the mips keeps extra stuff in it's opthdr, so dont check
- when doing that
- */
-
-#if defined(M88) || defined(I960)
- if (internal_f.f_opthdr != 0 && AOUTSZ != internal_f.f_opthdr)
- return (bfd_target *)NULL;
-#endif
-
- return coff_real_object_p(abfd, nscns, &internal_f, &internal_a);
-}
-
-
-
-#ifndef NO_COFF_LINENOS
-
-static void
-DEFUN(coff_count_linenumbers,(abfd),
- bfd *abfd)
-{
- unsigned int limit = bfd_get_symcount(abfd);
- unsigned int i;
- asymbol **p;
- {
- asection *s = abfd->sections->output_section;
- while (s) {
- BFD_ASSERT(s->lineno_count == 0);
- s = s->next;
- }
- }
-
-
- for (p = abfd->outsymbols, i = 0; i < limit; i++, p++) {
- asymbol *q_maybe = *p;
- if (q_maybe->the_bfd->xvec->flavour == bfd_target_coff_flavour) {
- coff_symbol_type *q = coffsymbol(q_maybe);
- if (q->lineno) {
- /*
- This symbol has a linenumber, increment the owning
- section's linenumber count
- */
- alent *l = q->lineno;
- q->symbol.section->output_section->lineno_count++;
- l++;
- while (l->line_number) {
- q->symbol.section->output_section->lineno_count++;
- l++;
- }
- }
- }
- }
-}
-
-#endif /* NO_COFF_LINENOS */
-
-#ifndef NO_COFF_SYMBOLS
-
-/*
- Takes a bfd and a symbol, returns a pointer to the coff specific area
- of the symbol if there is one.
- */
-static coff_symbol_type *
-DEFUN(coff_symbol_from,(ignore_abfd, symbol),
- bfd *ignore_abfd AND
- asymbol *symbol)
-{
- if (symbol->the_bfd->xvec->flavour != bfd_target_coff_flavour)
- return (coff_symbol_type *)NULL;
-
- if (symbol->the_bfd->tdata == (PTR)NULL)
- return (coff_symbol_type *)NULL;
-
- return (coff_symbol_type *) symbol;
-}
-
-
-
-static void
-DEFUN(fixup_symbol_value,(coff_symbol_ptr, syment),
-coff_symbol_type *coff_symbol_ptr AND
-struct internal_syment *syment)
-{
-
- /* Normalize the symbol flags */
- if (coff_symbol_ptr->symbol.flags & BSF_FORT_COMM) {
- /* a common symbol is undefined with a value */
- syment->n_scnum = N_UNDEF;
- syment->n_value = coff_symbol_ptr->symbol.value;
- }
- else if (coff_symbol_ptr->symbol.flags & BSF_DEBUGGING) {
- syment->n_value = coff_symbol_ptr->symbol.value;
- }
- else if (coff_symbol_ptr->symbol.flags & BSF_UNDEFINED) {
- syment->n_scnum = N_UNDEF;
- syment->n_value = 0;
- }
- else if (coff_symbol_ptr->symbol.flags & BSF_ABSOLUTE) {
- syment->n_scnum = N_ABS;
- syment->n_value = coff_symbol_ptr->symbol.value;
- }
- else {
- if (coff_symbol_ptr->symbol.section) {
- syment->n_scnum =
- coff_symbol_ptr->symbol.section->output_section->index+1;
-
- syment->n_value =
- coff_symbol_ptr->symbol.value +
- coff_symbol_ptr->symbol.section->output_offset +
- coff_symbol_ptr->symbol.section->output_section->vma;
- }
- else {
- /* This can happen, but I don't know why yet (steve@cygnus.com) */
- syment->n_scnum = N_ABS;
- syment->n_value = coff_symbol_ptr->symbol.value;
- }
- }
-}
-
-/* run through all the symbols in the symbol table and work out what
- their indexes into the symbol table will be when output
-
- Coff requires that each C_FILE symbol points to the next one in the
- chain, and that the last one points to the first external symbol. We
- do that here too.
-
-*/
-static void
-DEFUN(coff_renumber_symbols,(bfd_ptr),
- bfd *bfd_ptr)
-{
- unsigned int symbol_count = bfd_get_symcount(bfd_ptr);
- asymbol **symbol_ptr_ptr = bfd_ptr->outsymbols;
- unsigned int native_index = 0;
- struct internal_syment *last_file = (struct internal_syment *)NULL;
- unsigned int symbol_index;
- for (symbol_index = 0; symbol_index < symbol_count; symbol_index++)
- {
- coff_symbol_type *coff_symbol_ptr = coff_symbol_from(bfd_ptr, symbol_ptr_ptr[symbol_index]);
- if (coff_symbol_ptr && coff_symbol_ptr->native) {
- combined_entry_type *s = coff_symbol_ptr->native;
- int i;
-
- if (s->u.syment.n_sclass == C_FILE)
- {
- if (last_file != (struct internal_syment *)NULL) {
- last_file->n_value = native_index;
- }
- last_file = &(s->u.syment);
- }
- else {
-
- /* Modify the symbol values according to their section and
- type */
-
- fixup_symbol_value(coff_symbol_ptr, &(s->u.syment));
- }
- for (i = 0; i < s->u.syment.n_numaux + 1; i++) {
- s[i].offset = native_index ++;
- }
- }
- else {
- native_index++;
- }
- }
-}
-
-
-/*
- Run thorough the symbol table again, and fix it so that all pointers to
- entries are changed to the entries' index in the output symbol table.
-
-*/
-static void
-DEFUN(coff_mangle_symbols,(bfd_ptr),
- bfd *bfd_ptr)
-{
- unsigned int symbol_count = bfd_get_symcount(bfd_ptr);
- asymbol **symbol_ptr_ptr = bfd_ptr->outsymbols;
- unsigned int symbol_index;
-
- for (symbol_index = 0; symbol_index < symbol_count; symbol_index++)
- {
- coff_symbol_type *coff_symbol_ptr =
- coff_symbol_from(bfd_ptr, symbol_ptr_ptr[symbol_index]);
-
- if (coff_symbol_ptr && coff_symbol_ptr->native) {
- int i;
- combined_entry_type *s = coff_symbol_ptr->native;
-
- for (i = 0; i < s->u.syment.n_numaux ; i++) {
- combined_entry_type *a = s + i + 1;
- if (a->fix_tag) {
- a->u.auxent.x_sym.x_tagndx.l =
- a->u.auxent.x_sym.x_tagndx.p->offset;
- }
- if (a->fix_end) {
- a->u.auxent.x_sym.x_fcnary.x_fcn.x_endndx.l =
- a->u.auxent.x_sym.x_fcnary.x_fcn.x_endndx.p->offset;
- }
-
- }
- }
- }
-}
-
-static int string_size;
-static void
-DEFUN(coff_fix_symbol_name,(ignore_abfd, symbol, native),
- bfd *ignore_abfd AND
- asymbol *symbol AND
- combined_entry_type *native)
-{
- unsigned int name_length;
- union internal_auxent *auxent;
- char * name = ( char *)(symbol->name);
-
- if (name == (char *) NULL) {
- /* coff symbols always have names, so we'll make one up */
- symbol->name = "strange";
- name = (char *)symbol->name;
- }
- name_length = strlen(name);
-
- if (native->u.syment.n_sclass == C_FILE) {
- strncpy(native->u.syment._n._n_name, ".file", SYMNMLEN);
- auxent = &(native+1)->u.auxent;
-
-#ifdef COFF_LONG_FILENAMES
- if (name_length <= FILNMLEN) {
- strncpy(auxent->x_file.x_fname, name, FILNMLEN);
- }
- else {
- auxent->x_file.x_n.x_offset = string_size + 4;
- auxent->x_file.x_n.x_zeroes = 0;
- string_size += name_length + 1;
- }
-#else
- strncpy(auxent->x_file.x_fname, name, FILNMLEN);
- if (name_length > FILNMLEN) {
- name[FILNMLEN] = '\0';
- }
-#endif
- }
- else
- { /* NOT A C_FILE SYMBOL */
- if (name_length <= SYMNMLEN) {
- /* This name will fit into the symbol neatly */
- strncpy(native->u.syment._n._n_name, symbol->name, SYMNMLEN);
- }
- else {
- native->u.syment._n._n_n._n_offset = string_size + 4;
- native->u.syment._n._n_n._n_zeroes = 0;
- string_size += name_length + 1;
- }
- }
-}
-
-
-
-static unsigned int
-DEFUN(coff_write_symbol,(abfd, symbol, native, written),
-bfd *abfd AND
-asymbol *symbol AND
-combined_entry_type *native AND
-unsigned int written)
-{
- unsigned int numaux = native->u.syment.n_numaux;
- int type = native->u.syment.n_type;
- int class = native->u.syment.n_sclass;
- SYMENT buf;
- unsigned int j;
-
- coff_fix_symbol_name(abfd, symbol, native);
- coff_swap_sym_out(abfd, &native->u.syment, &buf);
- bfd_write((PTR)& buf, 1, SYMESZ, abfd);
- for (j = 0; j != native->u.syment.n_numaux; j++)
+#ifdef Z8KMAGIC
+ case Z8KMAGIC:
+ arch = bfd_arch_z8k;
+ switch (internal_f->f_flags & F_MACHMASK)
{
- AUXENT buf1;
- bzero((PTR)&buf, AUXESZ);
- coff_swap_aux_out(abfd,
- &( (native + j + 1)->u.auxent), type, class, &buf1);
- bfd_write((PTR) (&buf1), 1, AUXESZ, abfd);
- }
- /*
- Reuse somewhere in the symbol to keep the index
- */
- set_index(symbol, written);
- return written + 1 + numaux;
-}
-
-
-static unsigned int
-DEFUN(coff_write_alien_symbol,(abfd, symbol, written),
- bfd *abfd AND
- asymbol *symbol AND
- unsigned int written)
-{
- /*
- This symbol has been created by the loader, or come from a non
- coff format. It has no native element to inherit, make our
- own
- */
- combined_entry_type *native;
- combined_entry_type dummy;
- native = &dummy;
- native->u.syment.n_type = T_NULL;
-#ifdef I960
- native->u.syment.n_flags = 0;
+ case F_Z8001:
+ machine = bfd_mach_z8001;
+ break;
+ case F_Z8002:
+ machine = bfd_mach_z8002;
+ break;
+ default:
+ return false;
+ }
+ break;
#endif
- if (symbol->flags & BSF_ABSOLUTE) {
- native->u.syment.n_scnum = N_ABS;
- native->u.syment.n_value = symbol->value;
- }
- else if (symbol->flags & (BSF_UNDEFINED | BSF_FORT_COMM)) {
- native->u.syment.n_scnum = N_UNDEF;
- native->u.syment.n_value = symbol->value;
- }
- else if (symbol->flags & BSF_DEBUGGING) {
- /*
- remove name so it doesn't take up any space
- */
- symbol->name = "";
- }
- else {
- native->u.syment.n_scnum = symbol->section->output_section->index +
- 1;
- native->u.syment.n_value = symbol->value +
- symbol->section->output_section->vma +
- symbol->section->output_offset;
#ifdef I960
- /* Copy the any flags from the the file hdr into the symbol */
- {
- coff_symbol_type *c = coff_symbol_from(abfd, symbol);
- if (c != (coff_symbol_type *)NULL) {
- native->u.syment.n_flags = c->symbol.the_bfd->flags;
+#ifdef I960ROMAGIC
+ case I960ROMAGIC:
+ case I960RWMAGIC:
+ arch = bfd_arch_i960;
+ switch (F_I960TYPE & internal_f->f_flags)
+ {
+ default:
+ case F_I960CORE:
+ machine = bfd_mach_i960_core;
+ break;
+ case F_I960KB:
+ machine = bfd_mach_i960_kb_sb;
+ break;
+ case F_I960MC:
+ machine = bfd_mach_i960_mc;
+ break;
+ case F_I960XA:
+ machine = bfd_mach_i960_xa;
+ break;
+ case F_I960CA:
+ machine = bfd_mach_i960_ca;
+ break;
+ case F_I960KA:
+ machine = bfd_mach_i960_ka_sa;
+ break;
}
- }
+ break;
#endif
- }
-
-#ifdef HASPAD1
- native->u.syment.pad1[0] = 0;
- native->u.syment.pad1[0] = 0;
#endif
- native->u.syment.n_type = 0;
- if (symbol->flags & BSF_LOCAL)
- native->u.syment.n_sclass = C_STAT;
- else
- native->u.syment.n_sclass = C_EXT;
- native->u.syment.n_numaux = 0;
+#ifdef U802ROMAGIC
+ case U802ROMAGIC:
+ case U802WRMAGIC:
+ case U802TOCMAGIC:
+ arch = bfd_arch_rs6000;
+ machine = 6000;
+ break;
+#endif
- return coff_write_symbol(abfd, symbol, native, written);
-}
+#ifdef WE32KMAGIC
+ case WE32KMAGIC:
+ arch = bfd_arch_we32k;
+ machine = 0;
+ break;
+#endif
-static unsigned int
-DEFUN(coff_write_native_symbol,(abfd, symbol, written),
-bfd *abfd AND
-coff_symbol_type *symbol AND
-unsigned int written)
-{
- /*
- Does this symbol have an ascociated line number - if so then
- make it remember this symbol index. Also tag the auxent of
- this symbol to point to the right place in the lineno table
- */
- combined_entry_type *native = symbol->native;
+#ifdef H8300MAGIC
+ case H8300MAGIC:
+ arch = bfd_arch_h8300;
+ machine = 0;
+ /* !! FIXME this probably isn't the right place for this */
+ abfd->flags |= BFD_IS_RELAXABLE;
+ break;
+#endif
- alent *lineno = symbol->lineno;
+#ifdef SHMAGIC
+ case SHMAGIC:
+ arch = bfd_arch_sh;
+ machine = 0;
+ break;
+#endif
- if (lineno) {
- unsigned int count = 0;
- lineno[count].u.offset = written;
- if (native->u.syment.n_numaux) {
- union internal_auxent *a = &((native+1)->u.auxent);
+#ifdef H8500MAGIC
+ case H8500MAGIC:
+ arch = bfd_arch_h8500;
+ machine = 0;
+ break;
+#endif
- a->x_sym.x_fcnary.x_fcn.x_lnnoptr =
- symbol->symbol.section->output_section->moving_line_filepos;
- }
- /*
- And count and relocate all other linenumbers
- */
- count++;
- while (lineno[count].line_number) {
- lineno[count].u.offset +=
- symbol->symbol.section->output_section->vma +
- symbol->symbol.section->output_offset;
- count++;
- }
- symbol->symbol.section->output_section->moving_line_filepos +=
- count * LINESZ;
+ default: /* Unreadable input file type */
+ arch = bfd_arch_obscure;
+break;
}
- return coff_write_symbol(abfd, &( symbol->symbol), native,written);
-}
-
-static void
-DEFUN(coff_write_symbols,(abfd),
- bfd *abfd)
-{
- unsigned int i;
- unsigned int limit = bfd_get_symcount(abfd);
- unsigned int written = 0;
-
- asymbol **p;
- string_size = 0;
-
-
- /* Seek to the right place */
- bfd_seek(abfd, obj_sym_filepos(abfd), SEEK_SET);
+ bfd_default_set_arch_mach(abfd, arch, machine);
+ return true;
+}
- /* Output all the symbols we have */
+#ifdef SYMNAME_IN_DEBUG
- written = 0;
- for (p = abfd->outsymbols, i = 0; i < limit; i++, p++)
- {
- asymbol *symbol = *p;
- coff_symbol_type *c_symbol = coff_symbol_from(abfd, symbol);
-
- if (c_symbol == (coff_symbol_type *) NULL ||
- c_symbol->native == (combined_entry_type *)NULL)
- {
- written = coff_write_alien_symbol(abfd, symbol, written);
- }
- else
- {
- written = coff_write_native_symbol(abfd, c_symbol, written);
- }
+static boolean
+DEFUN (symname_in_debug_hook, (abfd, sym),
+ bfd *abfd AND
+ struct internal_syment *sym)
+{
+ return SYMNAME_IN_DEBUG (sym) ? true : false;
+}
- }
+#else
- bfd_get_symcount(abfd) = written;
-
- /* Now write out strings */
-
- if (string_size != 0)
- {
- unsigned int size = string_size + 4;
- bfd_byte buffer[4];
-
- bfd_h_put_32(abfd, size, buffer);
- bfd_write((PTR) buffer, 1, sizeof(buffer), abfd);
- for (p = abfd->outsymbols, i = 0;
- i < limit;
- i++, p++)
- {
- asymbol *q = *p;
- size_t name_length = strlen(q->name);
- int maxlen;
- coff_symbol_type* c_symbol = coff_symbol_from(abfd, q);
- maxlen = ((c_symbol != NULL && c_symbol->native != NULL) &&
- (c_symbol->native->u.syment.n_sclass == C_FILE)) ?
- FILNMLEN : SYMNMLEN;
-
- if (name_length > maxlen) {
- bfd_write((PTR) (q->name), 1, name_length + 1, abfd);
- }
- }
- }
- else {
- /* We would normally not write anything here, but we'll write
- out 4 so that any stupid coff reader which tries to read
- the string table even when there isn't one won't croak.
- */
+#define symname_in_debug_hook \
+ (boolean (*) PARAMS ((bfd *, struct internal_syment *))) bfd_false
- uint32e_type size = 4;
- size = size;
- bfd_write((PTR)&size, 1, sizeof(size), abfd);
+#endif
- }
-}
+/*
+SUBSUBSECTION
+ Writing Relocations
+
+ To write relocations, all the back end does is step though the
+ canonical relocation table, and create an
+ @code{internal_reloc}. The symbol index to use is removed from
+ the @code{offset} field in the symbol table supplied, the
+ address comes directly from the sum of the section base
+ address and the relocation offset and the type is dug directly
+ from the howto field. Then the @code{internal_reloc} is
+ swapped into the shape of an @code{external_reloc} and written
+ out to disk.
-/*doc*
-@subsubsection Writing Relocations
-To write a relocations, all the back end does is step though the
-canonical relocation table, and create an @code{internal_reloc}. The
-symbol index to use is removed from the @code{offset} field in the
-symbol table supplied, the address comes directly from the sum of the
-section base address and the relocation offset and the type is dug
-directly from the howto field.
-
-Then the @code{internal_reloc} is swapped into the shape of an
-@code{external_reloc} and written out to disk.
*/
static void
struct internal_reloc n;
arelent *q = p[i];
memset((PTR)&n, 0, sizeof(n));
+
n.r_vaddr = q->address + s->vma;
- if (q->sym_ptr_ptr) {
- n.r_symndx = get_index((*(q->sym_ptr_ptr)));
+ /* The 29k const/consth reloc pair is a real kludge - the consth
+ part doesn't have a symbol - it has an offset. So rebuilt
+ that here */
+#ifdef R_IHCONST
+ if (q->howto->type == R_IHCONST)
+ n.r_symndx = q->addend;
+ else
+#endif
+
+
+ if (q->sym_ptr_ptr)
+ {
+ if (q->sym_ptr_ptr == bfd_abs_section.symbol_ptr_ptr)
+ {
+ /* This is a relocation relative to the absolute symbol */
+ n.r_symndx = -1;
+ }
+ else
+ {
+ n.r_symndx = get_index((*(q->sym_ptr_ptr)));
+ /* Take notice if the symbol reloc points to a symbol we don't have
+ in our symbol table. What should we do for this?? */
+ if (n.r_symndx > obj_conv_table_size (abfd))
+ abort ();
+ }
+
+
}
+
#ifdef SELECT_RELOC
/* Work out reloc type from what is required */
SELECT_RELOC(n.r_type, q->howto);
n.r_type = q->howto->type;
#endif
coff_swap_reloc_out(abfd, &n, &dst);
- bfd_write((PTR) &n, 1, RELSZ, abfd);
- }
- }
-}
-#endif /* NO_COFF_SYMBOLS */
-
-#ifndef NO_COFF_LINENOS
-
-static void
-DEFUN(coff_write_linenumbers,(abfd),
- bfd *abfd)
-{
- asection *s;
- for (s = abfd->sections; s != (asection *) NULL; s = s->next) {
- if (s->lineno_count) {
- asymbol **q = abfd->outsymbols;
- bfd_seek(abfd, s->line_filepos, SEEK_SET);
- /* Find all the linenumbers in this section */
- while (*q) {
- asymbol *p = *q;
- alent *l = BFD_SEND(p->the_bfd, _get_lineno, (p->the_bfd, p));
- if (l) {
- /* Found a linenumber entry, output */
- struct internal_lineno out;
- LINENO buff;
- memset( (PTR)&out, 0, sizeof(out));
- out.l_lnno = 0;
- out.l_addr.l_symndx = l->u.offset;
- coff_swap_lineno_out(abfd, &out, &buff);
- bfd_write((PTR) &buff, 1, LINESZ, abfd);
- l++;
- while (l->line_number) {
- out.l_lnno = l->line_number;
- out.l_addr.l_symndx = l->u.offset;
- coff_swap_lineno_out(abfd, &out, &buff);
- bfd_write((PTR) &buff, 1, LINESZ, abfd);
- l++;
- }
- }
- q++;
- }
+ bfd_write((PTR) &dst, 1, RELSZ, abfd);
}
}
}
-static alent *
-DEFUN(coff_get_lineno,(ignore_abfd, symbol),
- bfd *ignore_abfd AND
- asymbol *symbol)
-{
- return coffsymbol(symbol)->lineno;
-}
-
-#endif /* NO_COFF_LINENOS */
-
-static asymbol *
-coff_make_empty_symbol(abfd)
-bfd *abfd;
-{
- coff_symbol_type *new = (coff_symbol_type *) bfd_alloc(abfd, sizeof(coff_symbol_type));
- if (new == NULL) {
- bfd_error = no_memory;
- return (NULL);
- } /* on error */
- new->native = 0;
- new->lineno = (alent *) NULL;
- new->symbol.the_bfd = abfd;
- return &new->symbol;
-}
-
-#ifndef NO_COFF_SYMBOLS
-
-static void
-DEFUN(coff_print_symbol,(ignore_abfd, filep, symbol, how),
- bfd *ignore_abfd AND
- PTR filep AND
- asymbol *symbol AND
- bfd_print_symbol_type how)
-{
- FILE *file = (FILE *)filep;
- switch (how) {
- case bfd_print_symbol_name:
- fprintf(file, "%s", symbol->name);
- break;
- case bfd_print_symbol_more:
- fprintf(file, "coff %lx %lx", (unsigned long) coffsymbol(symbol)->native,
- (unsigned long) coffsymbol(symbol)->lineno);
- break;
- case bfd_print_symbol_nm:
- case bfd_print_symbol_all:
- {
- CONST char *section_name = symbol->section == (asection *) NULL ?
- "*abs" : symbol->section->name;
- bfd_print_symbol_vandf((PTR) file, symbol);
-
- fprintf(file, " %-5s %s %s %s",
- section_name,
- coffsymbol(symbol)->native ? "n" : "g",
- coffsymbol(symbol)->lineno ? "l" : " ",
- symbol->name);
- }
-
-
- break;
- }
-}
-
-#endif /* NO_COFF_SYMBOLS */
-
/* Set flags and magic number of a coff file from architecture and machine
type. Result is true if we can represent the arch&type, false if not. */
unsigned short *flagsp)
{
switch (bfd_get_arch(abfd)) {
-
+#ifdef Z8KMAGIC
+ case bfd_arch_z8k:
+ *magicp = Z8KMAGIC;
+ switch (bfd_get_mach(abfd))
+ {
+ case bfd_mach_z8001:
+ *flagsp = F_Z8001;
+ break;
+ case bfd_mach_z8002:
+ *flagsp = F_Z8002;
+ break;
+ default:
+ return false;
+ }
+ return true;
+#endif
#ifdef I960ROMAGIC
- case bfd_arch_i960:
+ case bfd_arch_i960:
{
unsigned flags;
}
break;
#endif
-#ifdef MIPS
- case bfd_arch_mips:
- *magicp = MIPS_MAGIC_2;
- return true;
- break;
-#endif
#ifdef I386MAGIC
case bfd_arch_i386:
*magicp = I386MAGIC;
return true;
+ break;
#endif
#ifdef MC68MAGIC
case bfd_arch_m68k:
*magicp = MC68MAGIC;
return true;
+ break;
#endif
#ifdef MC88MAGIC
- case bfd_arch_m88k:
- *magicp = MC88OMAGIC;
- return true;
- break;
+ case bfd_arch_m88k:
+ *magicp = MC88OMAGIC;
+ return true;
+ break;
+#endif
+#ifdef H8300MAGIC
+ case bfd_arch_h8300:
+ *magicp = H8300MAGIC;
+ return true;
+ break;
+#endif
+
+#ifdef SHMAGIC
+ case bfd_arch_sh:
+ *magicp = SHMAGIC;
+ return true;
+ break;
#endif
+#ifdef H8500MAGIC
+ case bfd_arch_h8500:
+ *magicp = H8500MAGIC;
+ return true;
+ break;
+#endif
#ifdef A29K_MAGIC_BIG
- case bfd_arch_a29k:
- if (abfd->xvec->byteorder_big_p)
- *magicp = A29K_MAGIC_BIG;
- else
- *magicp = A29K_MAGIC_LITTLE;
+ case bfd_arch_a29k:
+ if (abfd->xvec->byteorder_big_p)
+ *magicp = A29K_MAGIC_BIG;
+ else
+ *magicp = A29K_MAGIC_LITTLE;
+ return true;
+ break;
+#endif
+
+#ifdef WE32KMAGIC
+ case bfd_arch_we32k:
+ *magicp = WE32KMAGIC;
return true;
break;
#endif
#ifdef U802TOCMAGIC
case bfd_arch_rs6000:
*magicp = U802TOCMAGIC;
+ return true;
break;
#endif
DEFUN(coff_compute_section_file_positions,(abfd),
bfd *abfd)
{
- asection *current;
- asection *previous = (asection *)NULL;
- file_ptr sofar = FILHSZ;
- file_ptr old_sofar;
- if (bfd_get_start_address(abfd))
- {
- /* A start address may have been added to the original file. In this
- case it will need an optional header to record it. */
- abfd->flags |= EXEC_P;
- }
+ asection *current;
+ asection *previous = (asection *)NULL;
+ file_ptr sofar = FILHSZ;
+#ifndef I960
+ file_ptr old_sofar;
+#endif
+ if (bfd_get_start_address(abfd))
+ {
+ /* A start address may have been added to the original file. In this
+ case it will need an optional header to record it. */
+ abfd->flags |= EXEC_P;
+ }
- if (abfd->flags & EXEC_P)
- sofar += AOUTSZ;
+ if (abfd->flags & EXEC_P)
+ sofar += AOUTSZ;
- sofar += abfd->section_count * SCNHSZ;
- for (current = abfd->sections;
- current != (asection *)NULL;
- current = current->next) {
+ sofar += abfd->section_count * SCNHSZ;
+ for (current = abfd->sections;
+ current != (asection *)NULL;
+ current = current->next) {
- /* Only deal with sections which have contents */
- if (!(current->flags & SEC_HAS_CONTENTS))
- continue;
+ /* Only deal with sections which have contents */
+ if (!(current->flags & SEC_HAS_CONTENTS))
+ continue;
- /* Align the sections in the file to the same boundary on
- which they are aligned in virtual memory. I960 doesn't
- do this (FIXME) so we can stay in sync with Intel. 960
- doesn't yet page from files... */
+ /* Align the sections in the file to the same boundary on
+ which they are aligned in virtual memory. I960 doesn't
+ do this (FIXME) so we can stay in sync with Intel. 960
+ doesn't yet page from files... */
#ifndef I960
- {
- /* make sure this section is aligned on the right boundary - by
- padding the previous section up if necessary */
+ {
+ /* make sure this section is aligned on the right boundary - by
+ padding the previous section up if necessary */
- old_sofar= sofar;
- sofar = ALIGN(sofar, 1 << current->alignment_power);
- if (previous != (asection *)NULL) {
- previous->size += sofar - old_sofar;
- }
- }
+ old_sofar= sofar;
+ sofar = BFD_ALIGN(sofar, 1 << current->alignment_power);
+ if (previous != (asection *)NULL) {
+ previous->_raw_size += sofar - old_sofar;
+ }
+ }
#endif
- /* FIXME, in demand paged files, the low order bits of the file
- offset must match the low order bits of the virtual address.
- "Low order" is apparently implementation defined. Add code
- here to round sofar up to match the virtual address. */
+ /* FIXME, in demand paged files, the low order bits of the file
+ offset must match the low order bits of the virtual address.
+ "Low order" is apparently implementation defined. Add code
+ here to round sofar up to match the virtual address. */
+
+ current->filepos = sofar;
- current->filepos = sofar;
+ sofar += current->_raw_size;
+#ifndef I960
+ /* make sure that this section is of the right size too */
+ old_sofar = sofar;
+ sofar = BFD_ALIGN(sofar, 1 << current->alignment_power);
+ current->_raw_size += sofar - old_sofar ;
+#endif
- /* make sure that this section is of the right size too */
- old_sofar = sofar += current->size;
- sofar = ALIGN(sofar, 1 << current->alignment_power);
- current->size += sofar - old_sofar ;
+#ifdef _LIB
+ /* Force .lib sections to start at zero. The vma is then
+ incremented in coff_set_section_contents. This is right for
+ SVR3.2. */
+ if (strcmp (current->name, _LIB) == 0)
+ bfd_set_section_vma (abfd, current, 0);
+#endif
- previous = current;
+ previous = current;
}
- obj_relocbase(abfd) = sofar;
+ obj_relocbase(abfd) = sofar;
}
+/* If .file, .text, .data, .bss symbols are missing, add them. */
+/* @@ Should we only be adding missing symbols, or overriding the aux
+ values for existing section symbols? */
+static void
+coff_add_missing_symbols (abfd)
+ bfd *abfd;
+{
+ unsigned int nsyms = bfd_get_symcount (abfd);
+ asymbol **sympp = abfd->outsymbols;
+ asymbol **sympp2;
+ unsigned int i;
+ int need_text = 1, need_data = 1, need_bss = 1, need_file = 1;
-
+ for (i = 0; i < nsyms; i++)
+ {
+ coff_symbol_type *csym = coff_symbol_from (abfd, sympp[i]);
+ CONST char *name;
+ if (csym)
+ {
+ /* only do this if there is a coff representation of the input
+ symbol */
+ if (csym->native && csym->native->u.syment.n_sclass == C_FILE)
+ {
+ need_file = 0;
+ continue;
+ }
+ name = csym->symbol.name;
+ if (!name)
+ continue;
+ if (!strcmp (name, _TEXT))
+ need_text = 0;
+ else if (!strcmp (name, _DATA))
+ need_data = 0;
+ else if (!strcmp (name, _BSS))
+ need_bss = 0;
+ }
+ }
+ /* Now i == bfd_get_symcount (abfd). */
+ /* @@ For now, don't deal with .file symbol. */
+ need_file = 0;
+
+ if (!need_text && !need_data && !need_bss && !need_file)
+ return;
+ nsyms += need_text + need_data + need_bss + need_file;
+ sympp2 = (asymbol**) bfd_alloc_by_size_t (abfd, nsyms * sizeof (asymbol *));
+ memcpy (sympp2, sympp, i * sizeof (asymbol *));
+ if (need_file)
+ {
+ /* @@ Generate fake .file symbol, in sympp2[i], and increment i. */
+ abort ();
+ }
+ if (need_text)
+ sympp2[i++] = coff_section_symbol (abfd, _TEXT);
+ if (need_data)
+ sympp2[i++] = coff_section_symbol (abfd, _DATA);
+ if (need_bss)
+ sympp2[i++] = coff_section_symbol (abfd, _BSS);
+ BFD_ASSERT (i == nsyms);
+ bfd_set_symtab (abfd, sympp2, nsyms);
+}
/* SUPPRESS 558 */
/* SUPPRESS 529 */
static boolean
DEFUN(coff_write_object_contents,(abfd),
bfd *abfd)
- {
- asection *current;
- boolean hasrelocs = false;
- boolean haslinno = false;
- file_ptr reloc_base;
- file_ptr lineno_base;
- file_ptr sym_base;
- file_ptr scn_base;
- file_ptr data_base;
- unsigned long reloc_size = 0;
- unsigned long lnno_size = 0;
- asection *text_sec = NULL;
- asection *data_sec = NULL;
- asection *bss_sec = NULL;
-
- struct internal_filehdr internal_f;
- struct internal_aouthdr internal_a;
+{
+ asection *current;
+ unsigned int count;
+
+ boolean hasrelocs = false;
+ boolean haslinno = false;
+ file_ptr reloc_base;
+ file_ptr lineno_base;
+ file_ptr sym_base;
+ file_ptr scn_base;
+ file_ptr data_base;
+ unsigned long reloc_size = 0;
+ unsigned long lnno_size = 0;
+ asection *text_sec = NULL;
+ asection *data_sec = NULL;
+ asection *bss_sec = NULL;
+ struct internal_filehdr internal_f;
+ struct internal_aouthdr internal_a;
- bfd_error = system_call_error;
+ bfd_error = system_call_error;
+ /* Number the output sections, starting from one on the first section
+ with a name which doesn't start with a *.
+ @@ The code doesn't make this check. Is it supposed to be done,
+ or isn't it?? */
+ count = 1;
+ for (current = abfd->sections; current != (asection *)NULL;
+ current = current->next)
+ {
+ current->target_index = count;
+ count++;
+ }
- if(abfd->output_has_begun == false) {
+ if(abfd->output_has_begun == false) {
coff_compute_section_file_positions(abfd);
}
- if (abfd->sections != (asection *)NULL) {
+ if (abfd->sections != (asection *)NULL) {
scn_base = abfd->sections->filepos;
- }
+ }
else {
- scn_base = 0;
- }
+ scn_base = 0;
+ }
if (bfd_seek(abfd, scn_base, SEEK_SET) != 0)
- return false;
+ return false;
reloc_base = obj_relocbase(abfd);
/* Make a pass through the symbol table to count line number entries and
put them into the correct asections */
-#ifndef NO_COFF_LINENOS
- coff_count_linenumbers(abfd);
-#endif
+ lnno_size = coff_count_linenumbers(abfd) * LINESZ;
data_base = scn_base;
/* Work out the size of the reloc and linno areas */
- for (current = abfd->sections; current != NULL; current = current->next) {
- reloc_size += current->reloc_count * RELSZ;
-#ifndef NO_COFF_LINENOS
- lnno_size += current->lineno_count * LINESZ;
-#endif
- data_base += SCNHSZ;
+ for (current = abfd->sections; current != NULL; current =
+ current->next)
+ {
+ /* We give section headers to +ve indexes */
+ if (current->target_index > 0)
+ {
+
+ reloc_size += current->reloc_count * RELSZ;
+ data_base += SCNHSZ;
+ }
+
}
lineno_base = reloc_base + reloc_size;
sym_base = lineno_base + lnno_size;
/* Indicate in each section->line_filepos its actual file address */
- for (current = abfd->sections; current != NULL; current = current->next) {
- if (current->lineno_count) {
- current->line_filepos = lineno_base;
- current->moving_line_filepos = lineno_base;
-#ifndef NO_COFF_LINENOS
- lineno_base += current->lineno_count * LINESZ;
-#endif
- }
- else {
- current->line_filepos = 0;
- }
- if (current->reloc_count) {
- current->rel_filepos = reloc_base;
- reloc_base += current->reloc_count * sizeof(struct internal_reloc);
- }
- else {
- current->rel_filepos = 0;
+ for (current = abfd->sections; current != NULL; current =
+ current->next)
+ {
+ if (current->target_index > 0)
+ {
+
+ if (current->lineno_count) {
+ current->line_filepos = lineno_base;
+ current->moving_line_filepos = lineno_base;
+ lineno_base += current->lineno_count * LINESZ;
+ }
+ else {
+ current->line_filepos = 0;
+ }
+ if (current->reloc_count) {
+ current->rel_filepos = reloc_base;
+ reloc_base += current->reloc_count * RELSZ;
+ }
+ else {
+ current->rel_filepos = 0;
+ }
}
- }
+ }
+
- /* Write section headers to the file. */
+ /* Write section headers to the file. */
+ internal_f.f_nscns = 0;
bfd_seek(abfd,
(file_ptr) ((abfd->flags & EXEC_P) ?
(FILHSZ + AOUTSZ) : FILHSZ),
SEEK_SET);
- {
+{
#if 0
- unsigned int pad = abfd->flags & D_PAGED ? data_base : 0;
+ unsigned int pad = abfd->flags & D_PAGED ? data_base : 0;
#endif
- unsigned int pad = 0;
+ unsigned int pad = 0;
- for (current = abfd->sections; current != NULL; current = current->next) {
- struct internal_scnhdr section;
+ for (current = abfd->sections;
+ current != NULL;
+ current = current->next) {
+ struct internal_scnhdr section;
+ if (current->target_index > 0)
+ {
+ internal_f.f_nscns ++;
strncpy(&(section.s_name[0]), current->name, 8);
- section.s_vaddr = current->vma + pad;
- section.s_paddr = current->vma + pad;
- section.s_size = current->size - pad;
+#ifdef _LIB
+ /* Always set s_vaddr of .lib to 0. This is right for SVR3.2
+ Ian Taylor <ian@cygnus.com>. */
+ if (strcmp (current->name, _LIB) == 0)
+ section.s_vaddr = 0;
+ else
+#endif
+ section.s_vaddr = current->lma + pad;
+ section.s_paddr = current->lma + pad;
+ section.s_size = current->_raw_size - pad;
/*
If this section has no size or is unloadable then the scnptr
will be 0 too
*/
- if (current->size - pad == 0 ||
- (current->flags & SEC_LOAD) == 0) {
- section.s_scnptr = 0;
- }
+ if (current->_raw_size - pad == 0 ||
+ (current->flags & (SEC_LOAD | SEC_HAS_CONTENTS)) == 0) {
+ section.s_scnptr = 0;
+ }
else {
- section.s_scnptr = current->filepos;
- }
+ section.s_scnptr = current->filepos;
+ }
section.s_relptr = current->rel_filepos;
section.s_lnnoptr = current->line_filepos;
section.s_nreloc = current->reloc_count;
section.s_nlnno = current->lineno_count;
if (current->reloc_count != 0)
- hasrelocs = true;
+ hasrelocs = true;
if (current->lineno_count != 0)
- haslinno = true;
+ haslinno = true;
section.s_flags = sec_to_styp_flags(current->name,current->flags);
if (!strcmp(current->name, _TEXT)) {
- text_sec = current;
- } else if (!strcmp(current->name, _DATA)) {
- data_sec = current;
- } else if (!strcmp(current->name, _BSS)) {
- bss_sec = current;
- }
+ text_sec = current;
+ } else if (!strcmp(current->name, _DATA)) {
+ data_sec = current;
+#ifdef TWO_DATA_SECS
+ } else if (!strcmp(current->name, ".data2")) {
+ data_sec = current;
+#endif /* TWO_DATA_SECS */
+ } else if (!strcmp(current->name, _BSS)) {
+ bss_sec = current;
+ }
#ifdef I960
section.s_align = (current->alignment_power
: 0);
#endif
- {
- SCNHDR buff;
+ {
+ SCNHDR buff;
- coff_swap_scnhdr_out(abfd, §ion, &buff);
- bfd_write((PTR) (&buff), 1, SCNHSZ, abfd);
+ coff_swap_scnhdr_out(abfd, §ion, &buff);
+ bfd_write((PTR) (&buff), 1, SCNHSZ, abfd);
+
+ }
- }
pad = 0;
}
- }
+ }
+}
+
/* OK, now set up the filehdr... */
- internal_f.f_nscns = abfd->section_count;
+
+ /* Don't include the internal abs section in the section count */
+
/*
We will NOT put a fucking timestamp in the header here. Every time you
- put it back, I will come in and take it out again. I'm sorry. This
+ put it back, I will come in and take it out again. I'm sorry. This
field does not belong here. We fill it with a 0 so it compares the
same but is not a reasonable time. -- gnu@cygnus.com
*/
- /*
- Well, I like it, so I'm conditionally compiling it in.
- steve@cygnus.com
- */
-#ifdef COFF_TIMESTAMP
- internal_f.f_timdat = time(0);
-#else
internal_f.f_timdat = 0;
-#endif
if (bfd_get_symcount(abfd) != 0)
- internal_f.f_symptr = sym_base;
+ internal_f.f_symptr = sym_base;
else
- internal_f.f_symptr = 0;
+ internal_f.f_symptr = 0;
internal_f.f_flags = 0;
if (abfd->flags & EXEC_P)
- internal_f.f_opthdr = AOUTSZ;
+ internal_f.f_opthdr = AOUTSZ;
else
- internal_f.f_opthdr = 0;
+ internal_f.f_opthdr = 0;
if (!hasrelocs)
- internal_f.f_flags |= F_RELFLG;
+ internal_f.f_flags |= F_RELFLG;
if (!haslinno)
- internal_f.f_flags |= F_LNNO;
+ internal_f.f_flags |= F_LNNO;
if (0 == bfd_get_symcount(abfd))
- internal_f.f_flags |= F_LSYMS;
+ internal_f.f_flags |= F_LSYMS;
if (abfd->flags & EXEC_P)
- internal_f.f_flags |= F_EXEC;
-#if M88
- internal_f.f_flags |= F_AR32W;
-#else
+ internal_f.f_flags |= F_EXEC;
+
if (!abfd->xvec->byteorder_big_p)
- internal_f.f_flags |= F_AR32WR;
-#endif
+ internal_f.f_flags |= F_AR32WR;
+ else
+ internal_f.f_flags |= F_AR32W;
+
/*
FIXME, should do something about the other byte orders and
architectures.
/* Set up architecture-dependent stuff */
- { unsigned int magic = 0;
- unsigned short flags = 0;
- coff_set_flags(abfd, &magic, &flags);
- internal_f.f_magic = magic;
- internal_f.f_flags |= flags;
- /* ...and the "opt"hdr... */
+{ unsigned int magic = 0;
+ unsigned short flags = 0;
+ coff_set_flags(abfd, &magic, &flags);
+ internal_f.f_magic = magic;
+ internal_f.f_flags |= flags;
+ /* ...and the "opt"hdr... */
#ifdef A29K
-# ifdef ULTRA3 /* NYU's machine */
- /* FIXME: This is a bogus check. I really want to see if there
- * is a .shbss or a .shdata section, if so then set the magic
- * number to indicate a shared data executable.
- */
- if (internal_f.f_nscns >= 7)
- internal_a.magic = SHMAGIC; /* Shared magic */
- else
-# endif /* ULTRA3 */
- internal_a.magic = NMAGIC; /* Assume separate i/d */
+# ifdef ULTRA3 /* NYU's machine */
+ /* FIXME: This is a bogus check. I really want to see if there
+ * is a .shbss or a .shdata section, if so then set the magic
+ * number to indicate a shared data executable.
+ */
+ if (internal_f.f_nscns >= 7)
+ internal_a.magic = SHMAGIC; /* Shared magic */
+ else
+# endif /* ULTRA3 */
+ internal_a.magic = NMAGIC; /* Assume separate i/d */
#define __A_MAGIC_SET__
-#endif /* A29K */
+#endif /* A29K */
#ifdef I960
- internal_a.magic = (magic == I960ROMAGIC ? NMAGIC : OMAGIC);
+ internal_a.magic = (magic == I960ROMAGIC ? NMAGIC : OMAGIC);
#define __A_MAGIC_SET__
-#endif /* I960 */
+#endif /* I960 */
#if M88
#define __A_MAGIC_SET__
- internal_a.magic = PAGEMAGICBCS;
-#endif /* M88 */
+ internal_a.magic = PAGEMAGICBCS;
+#endif /* M88 */
-#if M68 || I386 || MIPS
+#if M68 || WE32K
#define __A_MAGIC_SET__
- /* Never was anything here for the 68k */
-#endif /* M88 */
+ /* Never was anything here for the 68k */
+#endif /* M68 || WE32K */
+
+#if I386
+# define __A_MAGIC_SET__
+ internal_a.magic = ZMAGIC;
+#endif /* I386 */
#if RS6000COFF_C
#define __A_MAGIC_SET__
- internal_a.magic = (abfd->flags & D_PAGED)? RS6K_AOUTHDR_ZMAGIC:
- (abfd->flags & WP_TEXT)? RS6K_AOUTHDR_NMAGIC:
- RS6K_AOUTHDR_OMAGIC;
+ internal_a.magic = (abfd->flags & D_PAGED)? RS6K_AOUTHDR_ZMAGIC:
+ (abfd->flags & WP_TEXT)? RS6K_AOUTHDR_NMAGIC:
+ RS6K_AOUTHDR_OMAGIC;
#endif
#ifndef __A_MAGIC_SET__
#else
# undef __A_MAGIC_SET__
#endif
- }
+}
/* Now should write relocs, strings, syms */
obj_sym_filepos(abfd) = sym_base;
-#ifndef NO_COFF_SYMBOLS
if (bfd_get_symcount(abfd) != 0) {
- coff_renumber_symbols(abfd);
- coff_mangle_symbols(abfd);
- coff_write_symbols(abfd);
- coff_write_linenumbers(abfd);
- coff_write_relocs(abfd);
- }
-#endif /* NO_COFF_SYMBOLS */
+ coff_add_missing_symbols (abfd);
+ coff_renumber_symbols(abfd);
+ coff_mangle_symbols(abfd);
+ coff_write_symbols(abfd);
+ coff_write_linenumbers(abfd);
+ coff_write_relocs(abfd);
+ }
if (text_sec) {
- internal_a.tsize = text_sec->size;
- internal_a.text_start =text_sec->size ? text_sec->vma : 0;
- }
+ internal_a.tsize = bfd_get_section_size_before_reloc(text_sec);
+ internal_a.text_start = internal_a.tsize ? text_sec->vma : 0;
+ }
if (data_sec) {
- internal_a.dsize = data_sec->size;
- internal_a.data_start = data_sec->size ? data_sec->vma : 0;
- }
+ internal_a.dsize = bfd_get_section_size_before_reloc(data_sec);
+ internal_a.data_start = internal_a.dsize ? data_sec->vma : 0;
+ }
if (bss_sec) {
- internal_a.bsize = bss_sec->size;
- }
+ internal_a.bsize = bfd_get_section_size_before_reloc(bss_sec);
+ }
internal_a.entry = bfd_get_start_address(abfd);
internal_f.f_nsyms = bfd_get_symcount(abfd);
/* now write them */
- if (bfd_seek(abfd, 0L, SEEK_SET) != 0)
- return false;
- {
- FILHDR buff;
- coff_swap_filehdr_out(abfd, &internal_f, &buff);
- bfd_write((PTR) &buff, 1, FILHSZ, abfd);
- }
+ if (bfd_seek(abfd, (file_ptr) 0, SEEK_SET) != 0)
+ return false;
+{
+ FILHDR buff;
+ coff_swap_filehdr_out(abfd, (PTR)&internal_f, (PTR)&buff);
+ bfd_write((PTR) &buff, 1, FILHSZ, abfd);
+}
if (abfd->flags & EXEC_P) {
- AOUTHDR buff;
- coff_swap_aouthdr_out(abfd, &internal_a, &buff);
- bfd_write((PTR) &buff, 1, AOUTSZ, abfd);
- }
+ AOUTHDR buff;
+ coff_swap_aouthdr_out(abfd, (PTR)&internal_a, (PTR)&buff);
+ bfd_write((PTR) &buff, 1, AOUTSZ, abfd);
+ }
return true;
}
-#ifndef NO_COFF_SYMBOLS
-
-/*
-this function transforms the offsets into the symbol table into
-pointers to syments.
-*/
-
-
-static void
-DEFUN(coff_pointerize_aux,(ignore_abfd, table_base, type, class, auxent),
-bfd *ignore_abfd AND
-combined_entry_type *table_base AND
-int type AND
-int class AND
-combined_entry_type *auxent)
-{
- /* Don't bother if this is a file or a section */
- if (class == C_STAT && type == T_NULL) return;
- if (class == C_FILE) return;
-
- /* Otherwise patch up */
- if (ISFCN(type) || ISTAG(class) || class == C_BLOCK) {
- auxent->u.auxent.x_sym.x_fcnary.x_fcn.x_endndx.p = table_base +
- auxent->u.auxent.x_sym.x_fcnary.x_fcn.x_endndx.l;
- auxent->fix_end = 1;
- }
- if (auxent->u.auxent.x_sym.x_tagndx.l != 0) {
- auxent->u.auxent.x_sym.x_tagndx.p = table_base + auxent->u.auxent.x_sym.x_tagndx.l;
- auxent->fix_tag = 1;
- }
-}
-
-#endif /* NO_COFF_SYMBOLS */
-
static boolean
DEFUN(coff_set_section_contents,(abfd, section, location, offset, count),
bfd *abfd AND
if (abfd->output_has_begun == false) /* set by bfd.c handler */
coff_compute_section_file_positions(abfd);
+#ifdef _LIB
+ /* If this is a .lib section, bump the vma address so that it
+ winds up being the number of .lib sections output. This is
+ right for SVR3.2. Shared libraries should probably get more
+ generic support. Ian Taylor <ian@cygnus.com>. */
+ if (strcmp (section->name, _LIB) == 0)
+ ++section->lma;
+#endif
+
+ /* Don't write out bss sections - one way to do this is to
+ see if the filepos has not been set. */
+ if (section->filepos == 0)
+ return true;
+
bfd_seek(abfd, (file_ptr) (section->filepos + offset), SEEK_SET);
if (count != 0) {
}
#endif
+
static PTR
buy_and_read(abfd, where, seek_direction, size)
bfd *abfd;
return (area);
} /* buy_and_read() */
+/*
+SUBSUBSECTION
+ Reading Linenumbers
-#ifndef NO_COFF_SYMBOLS
-
-static char *
-DEFUN(build_string_table,(abfd),
-bfd *abfd)
-{
- char string_table_size_buffer[4];
- unsigned int string_table_size;
- char *string_table;
-
- /* At this point we should be "seek"'d to the end of the
- symbols === the symbol table size. */
- if (bfd_read((char *) string_table_size_buffer,
- sizeof(string_table_size_buffer),
- 1, abfd) != sizeof(string_table_size)) {
- bfd_error = system_call_error;
- return (NULL);
- } /* on error */
-
- string_table_size = bfd_h_get_32(abfd, (bfd_byte *) string_table_size_buffer);
-
- if ((string_table = (PTR) bfd_alloc(abfd, string_table_size -= 4)) == NULL) {
- bfd_error = no_memory;
- return (NULL);
- } /* on mallocation error */
- if (bfd_read(string_table, string_table_size, 1, abfd) != string_table_size) {
- bfd_error = system_call_error;
- return (NULL);
- }
- return string_table;
-}
-
-/* Allocate space for the ".debug" section, and read it.
- We did not read the debug section until now, because
- we didn't want to go to the trouble until someone needed it. */
-
-static char *
-DEFUN(build_debug_section,(abfd),
- bfd *abfd)
-{
- char *debug_section;
- long position;
-
- asection *sect = bfd_get_section_by_name (abfd, ".debug");
-
- if (!sect) {
- bfd_error = no_debug_section;
- return NULL;
- }
-
- debug_section = (PTR) bfd_alloc (abfd, bfd_section_size (abfd, sect));
- if (debug_section == NULL) {
- bfd_error = no_memory;
- return NULL;
- }
-
- /* Seek to the beginning of the `.debug' section and read it.
- Save the current position first; it is needed by our caller.
- Then read debug section and reset the file pointer. */
-
- position = bfd_tell (abfd);
- bfd_seek (abfd, sect->filepos, SEEK_SET);
- if (bfd_read (debug_section, bfd_section_size (abfd, sect), 1, abfd)
- != bfd_section_size (abfd, sect)) {
- bfd_error = system_call_error;
- return NULL;
- }
- bfd_seek (abfd, position, SEEK_SET);
- return debug_section;
-}
-
-
-/* Return a pointer to a malloc'd copy of 'name'. 'name' may not be
- \0-terminated, but will not exceed 'maxlen' characters. The copy *will*
- be \0-terminated. */
-static char *
-DEFUN(copy_name,(abfd, name, maxlen),
- bfd *abfd AND
- char *name AND
- int maxlen)
-{
- int len;
- char *newname;
-
- for (len = 0; len < maxlen; ++len) {
- if (name[len] == '\0') {
- break;
- }
- }
-
- if ((newname = (PTR) bfd_alloc(abfd, len+1)) == NULL) {
- bfd_error = no_memory;
- return (NULL);
- }
- strncpy(newname, name, len);
- newname[len] = '\0';
- return newname;
-}
-
-
-/* Read a symbol table into freshly bfd_allocated memory, swap it, and
- knit the symbol names into a normalized form. By normalized here I
- mean that all symbols have an n_offset pointer that points to a null-
- terminated string. */
-
-#ifndef SYMNAME_IN_DEBUG
-#define SYMNAME_IN_DEBUG(x) 0
-#endif
-
-static combined_entry_type *
-DEFUN(get_normalized_symtab,(abfd),
-bfd *abfd)
-{
- combined_entry_type *internal;
- combined_entry_type *internal_ptr;
- combined_entry_type *internal_end;
- SYMENT *raw;
- SYMENT *raw_src;
- SYMENT *raw_end;
- char *string_table = NULL;
- char *debug_section = NULL;
- unsigned long size;
-
- unsigned int raw_size;
- if (obj_raw_syments(abfd) != (combined_entry_type *)NULL) {
- return obj_raw_syments(abfd);
- }
- if ((size = bfd_get_symcount(abfd) * sizeof(combined_entry_type)) == 0) {
- bfd_error = no_symbols;
- return (NULL);
- }
-
- internal = (combined_entry_type *)bfd_alloc(abfd, size);
- internal_end = internal + bfd_get_symcount(abfd);
-
- raw_size = bfd_get_symcount(abfd) * SYMESZ;
- raw = (SYMENT *)bfd_alloc(abfd,raw_size);
-
- if (bfd_seek(abfd, obj_sym_filepos(abfd), SEEK_SET) == -1
- || bfd_read((PTR)raw, raw_size, 1, abfd) != raw_size) {
- bfd_error = system_call_error;
- return (NULL);
- }
- /* mark the end of the symbols */
- raw_end = raw + bfd_get_symcount(abfd);
- /*
- FIXME SOMEDAY. A string table size of zero is very weird, but
- probably possible. If one shows up, it will probably kill us.
- */
-
- /* Swap all the raw entries */
- for (raw_src = raw, internal_ptr = internal;
- raw_src < raw_end;
- raw_src++, internal_ptr++) {
-
- unsigned int i;
- coff_swap_sym_in(abfd, (char *)raw_src, (char *)&internal_ptr->u.syment);
- internal_ptr->fix_tag = 0;
- internal_ptr->fix_end = 0;
-
- for (i = internal_ptr->u.syment.n_numaux;
- i;
- --i, raw_src++, internal_ptr++) {
-
- (internal_ptr+1)->fix_tag = 0;
- (internal_ptr+1)->fix_end = 0;
-
- coff_swap_aux_in(abfd, (char *)(raw_src +1),
- internal_ptr->u.syment.n_type,
- internal_ptr->u.syment.n_sclass,
- &(internal_ptr+1)->u.auxent);
-
- coff_pointerize_aux(abfd,
- internal,
- internal_ptr->u.syment.n_type,
- internal_ptr->u.syment.n_sclass,
- internal_ptr +1);
- }
- }
-
- /* Free all the raw stuff */
- bfd_release(abfd, raw);
-
- for (internal_ptr = internal; internal_ptr < internal_end;
- internal_ptr ++)
- {
- if (internal_ptr->u.syment.n_sclass == C_FILE) {
- /* make a file symbol point to the name in the auxent, since
- the text ".file" is redundant */
- if ((internal_ptr+1)->u.auxent.x_file.x_n.x_zeroes == 0) {
- /* the filename is a long one, point into the string table */
- if (string_table == NULL) {
- string_table = build_string_table(abfd);
- }
-
- internal_ptr->u.syment._n._n_n._n_offset =
- (int) (string_table - 4 +
- (internal_ptr+1)->u.auxent.x_file.x_n.x_offset);
- }
- else {
- /* ordinary short filename, put into memory anyway */
- internal_ptr->u.syment._n._n_n._n_offset = (int)
- copy_name(abfd, (internal_ptr+1)->u.auxent.x_file.x_fname,
- FILNMLEN);
- }
- }
- else {
- if (internal_ptr->u.syment._n._n_n._n_zeroes != 0) {
- /* This is a "short" name. Make it long. */
- unsigned long i = 0;
- char *newstring = NULL;
-
- /* find the length of this string without walking into memory
- that isn't ours. */
- for (i = 0; i < 8; ++i) {
- if (internal_ptr->u.syment._n._n_name[i] == '\0') {
- break;
- } /* if end of string */
- } /* possible lengths of this string. */
-
- if ((newstring = (PTR) bfd_alloc(abfd, ++i)) == NULL) {
- bfd_error = no_memory;
- return (NULL);
- } /* on error */
- bzero(newstring, i);
- strncpy(newstring, internal_ptr->u.syment._n._n_name, i-1);
- internal_ptr->u.syment._n._n_n._n_offset = (int) newstring;
- internal_ptr->u.syment._n._n_n._n_zeroes = 0;
- }
- else if (!SYMNAME_IN_DEBUG(&internal_ptr->u.syment)) {
- /* Long name already. Point symbol at the string in the table. */
- if (string_table == NULL) {
- string_table = build_string_table(abfd);
- }
- internal_ptr->u.syment._n._n_n._n_offset = (int)
- (string_table - 4 + internal_ptr->u.syment._n._n_n._n_offset);
- }
- else {
- /* Long name in debug section. Very similar. */
- if (debug_section == NULL) {
- debug_section = build_debug_section(abfd);
- }
- internal_ptr->u.syment._n._n_n._n_offset = (int)
- (debug_section + internal_ptr->u.syment._n._n_n._n_offset);
- }
- }
- internal_ptr += internal_ptr->u.syment.n_numaux;
- }
-
- obj_raw_syments(abfd) = internal;
-
- return (internal);
-} /* get_normalized_symtab() */
-
-#endif /* NO_COFF_SYMBOLS */
-
-static
-struct sec *
-DEFUN(section_from_bfd_index,(abfd, index),
- bfd *abfd AND
- int index)
-{
- if (index > 0) {
- struct sec *answer = abfd->sections;
- while (--index) {
- answer = answer->next;
- }
- return answer;
- }
- return 0;
-}
-
-#ifndef NO_COFF_LINENOS
-
-/*doc*
-@subsubsection Reading Linenumbers
-Createing the linenumber table is done by reading in the entire coff
-linenumber table, and creating another table for internal use.
+ Creating the linenumber table is done by reading in the entire
+ coff linenumber table, and creating another table for internal use.
-A coff line number table is structured so that each
-function is marked as having a line number of 0. Each line within the
-function is an offset from the first line in the function. The base of
-the line number information for the table is stored in the symbol
-associated with the function.
+ A coff line number table is structured so that each function
+ is marked as having a line number of 0. Each line within the
+ function is an offset from the first line in the function. The
+ base of the line number information for the table is stored in
+ the symbol associated with the function.
-The information is copied from the external to the internal table, and
-each symbol which marks a function is marked by pointing its...
+ The information is copied from the external to the internal
+ table, and each symbol which marks a function is marked by
+ pointing its...
-**How does this work ?**
+ How does this work ?
*/
if (cache_ptr->line_number == 0) {
coff_symbol_type *sym =
(coff_symbol_type *) (dst.l_addr.l_symndx
- + obj_symbol_slew(abfd)
+ obj_raw_syments(abfd))->u.syment._n._n_n._n_zeroes;
cache_ptr->u.sym = (asymbol *) sym;
sym->lineno = cache_ptr;
return true;
} /* coff_slurp_line_table() */
-#endif /* NO_COFF_LINENOS */
-
-#ifndef NO_COFF_LINENOS
-
static boolean
DEFUN(coff_slurp_symbol_table,(abfd),
bfd *abfd)
bfd_seek(abfd, obj_sym_filepos(abfd), SEEK_SET);
/* Read in the symbol table */
- if ((native_symbols = get_normalized_symtab(abfd)) == NULL) {
+ if ((native_symbols = coff_get_normalized_symtab(abfd)) == NULL) {
return (false);
} /* on error */
We use the native name field to point to the cached field
*/
src->u.syment._n._n_n._n_zeroes = (int) dst;
- dst->symbol.section = section_from_bfd_index(abfd,
- src->u.syment.n_scnum);
+ dst->symbol.section = coff_section_from_bfd_index(abfd,
+ src->u.syment.n_scnum);
+ dst->symbol.flags = 0;
+ dst->done_lineno = false;
+
switch (src->u.syment.n_sclass) {
#ifdef I960
case C_LEAFEXT:
#endif
if ((src->u.syment.n_scnum) == 0) {
if ((src->u.syment.n_value) == 0) {
- dst->symbol.flags = BSF_UNDEFINED;
+ dst->symbol.section = &bfd_und_section;
dst->symbol.value= 0;
}
else {
- dst->symbol.flags = BSF_FORT_COMM;
+ dst->symbol.section = &bfd_com_section;
dst->symbol.value = (src->u.syment.n_value);
}
}
Base the value as an index from the base of the
section
*/
- if (dst->symbol.section == (asection *) NULL) {
- dst->symbol.flags = BSF_EXPORT | BSF_GLOBAL | BSF_ABSOLUTE;
- dst->symbol.value = src->u.syment.n_value;
- }
- else {
+
dst->symbol.flags = BSF_EXPORT | BSF_GLOBAL;
dst->symbol.value = src->u.syment.n_value - dst->symbol.section->vma;
- }
+
if (ISFCN((src->u.syment.n_type))) {
/*
A function ext does not go at the end of a file
fprintf(stderr,"Unrecognized storage class %d\n",
src->u.syment.n_sclass);
- abort();
+/* abort();*/
dst->symbol.flags = BSF_DEBUGGING;
dst->symbol.value = (src->u.syment.n_value);
break;
}
- BFD_ASSERT(dst->symbol.flags != 0);
+/* BFD_ASSERT(dst->symbol.flags != 0);*/
dst->native = src;
obj_symbols(abfd) = cached_area;
obj_raw_syments(abfd) = native_symbols;
+ obj_conv_table_size (abfd) = bfd_get_symcount (abfd);
bfd_get_symcount(abfd) = number_of_symbols;
obj_convert(abfd) = table_ptr;
/* Slurp the line tables for each section too */
return true;
} /* coff_slurp_symbol_table() */
-static unsigned int
-coff_get_symtab_upper_bound(abfd)
-bfd *abfd;
- {
- if (!coff_slurp_symbol_table(abfd))
- return 0;
+/*
+SUBSUBSECTION
+ Reading Relocations
- return (bfd_get_symcount(abfd) + 1) * (sizeof(coff_symbol_type *));
- }
+ Coff relocations are easily transformed into the internal BFD form
+ (@code{arelent}).
+ Reading a coff relocation table is done in the following stages:
-static unsigned int
-DEFUN(coff_get_symtab, (abfd, alocation),
- bfd *abfd AND
- asymbol **alocation)
-{
- unsigned int counter = 0;
- coff_symbol_type *symbase;
- coff_symbol_type **location = (coff_symbol_type **) (alocation);
- if (!coff_slurp_symbol_table(abfd))
- return 0;
+ o The entire coff relocation table is read into memory.
- symbase = obj_symbols(abfd);
- while (counter < bfd_get_symcount(abfd))
- {
- /* This nasty code looks at the symbol to decide whether or
- not it is descibes a constructor/destructor entry point. It
- is structured this way to (hopefully) speed non matches */
-
- if (symbase->symbol.name[9] == '$')
- {
- bfd_constructor_entry(abfd,
- (asymbol **)location,
- symbase->symbol.name[10] == 'I' ?
- "CTOR" : "DTOR");
- }
+ o Each relocation is processed in turn, first it is swapped from the
+ external to the internal form.
- *(location++) = symbase++;
- counter++;
- }
- *location++ = 0;
- return bfd_get_symcount(abfd);
-}
+ o The symbol referenced in the relocation's symbol index is
+ turned intoa pointer into the canonical symbol table. Note
+ that this table is the same as the one returned by a call to
+ @code{bfd_canonicalize_symtab}. The back end will call the
+ routine and save the result if a canonicalization hasn't been done.
-#endif /* NO_COFF_SYMBOLS */
+ o The reloc index is turned into a pointer to a howto
+ structure, in a back end specific way. For instance, the 386
+ and 960 use the @code{r_type} to directly produce an index
+ into a howto table vector; the 88k subtracts a number from the
+ @code{r_type} field and creates an addend field.
-static unsigned int
-coff_get_reloc_upper_bound(abfd, asect)
-bfd *abfd;
-sec_ptr asect;
- {
- if (bfd_get_format(abfd) != bfd_object) {
- bfd_error = invalid_operation;
- return 0;
- }
- return (asect->reloc_count + 1) * sizeof(arelent *);
- }
-/*doc*
-@subsubsection Reading Relocations
-Coff relocations are easily transformed into the internal BFD form
-(@code{arelent}).
-
-Reading a coff relocation table is done in the following stages:
-@itemize @bullet
-@item
-The entire coff relocation table is read into memory.
-@item
-Each relocation is processed in turn, first it is swapped from the
-external to the internal form.
-@item
-The symbol referenced in the relocation's symbol index is turned into
-a pointer into the canonical symbol table. Note that this table is the
-same as the one returned by a call to @code{bfd_canonicalize_symtab}.
-The back end will call the routine and save the result if a
-canonicalization hasn't been done.
-@item
-The reloc index is turned into a pointer to a howto structure, in a
-back end specific way. For instance, the 386 and 960 use the
-@code{r_type} to directly produce an index into a howto table vector;
-the 88k subtracts a number from the @code{r_type} field and creates an
-addend field.
-@end itemize
*/
+#ifndef CALC_ADDEND
+#define CALC_ADDEND(abfd, ptr, reloc, cache_ptr) \
+ if (ptr && bfd_asymbol_bfd(ptr) == abfd \
+ && ((ptr->flags & BSF_OLD_COMMON)== 0)) \
+ { \
+ cache_ptr->addend = -(ptr->section->vma + ptr->value); \
+ } \
+ else { \
+ cache_ptr->addend = 0; \
+ }
+#endif
+
static boolean
DEFUN(coff_slurp_reloc_table,(abfd, asect, symbols),
bfd *abfd AND
sec_ptr asect AND
asymbol **symbols)
{
- RELOC *native_relocs;
- arelent *reloc_cache;
- if (asect->relocation)
- return true;
- if (asect->reloc_count == 0)
- return true;
- if (asect->flags & SEC_CONSTRUCTOR)
- return true;
-#ifndef NO_COFF_SYMBOLS
- if (!coff_slurp_symbol_table(abfd))
- return false;
-#endif
- native_relocs =
- (RELOC *) buy_and_read(abfd,
- asect->rel_filepos,
- SEEK_SET,
- (size_t) (RELSZ *
- asect->reloc_count));
- reloc_cache = (arelent *)
- bfd_alloc(abfd, (size_t) (asect->reloc_count * sizeof(arelent)));
-
- if (reloc_cache == NULL) {
- bfd_error = no_memory;
- return false;
- } { /* on error */
- arelent *cache_ptr;
- RELOC *src;
- for (cache_ptr = reloc_cache,
- src = native_relocs;
- cache_ptr < reloc_cache + asect->reloc_count;
- cache_ptr++,
- src++) {
- struct internal_reloc dst;
- asymbol *ptr;
- bfd_swap_reloc_in(abfd, src, &dst);
-
- dst.r_symndx += obj_symbol_slew(abfd);
- cache_ptr->sym_ptr_ptr = symbols + obj_convert(abfd)[dst.r_symndx];
-#ifdef A29K
- /* AMD has two relocation entries for the 'consth' instruction.
- * The first is R_IHIHALF (part 1), the second is R_IHCONST
- * (part 2). The second entry's r_symndx does not contain
- * an index to a symbol but rather a value (apparently).
- * Also, see the ifdef below for saving the r_symndx value in addend.
- */
- if (dst.r_type == R_IHCONST) {
- ptr = NULL;
- } else
-#endif
- ptr = *(cache_ptr->sym_ptr_ptr);
- cache_ptr->address = dst.r_vaddr;
- /*
- The symbols definitions that we have read in have been
- relocated as if their sections started at 0. But the offsets
- refering to the symbols in the raw data have not been
- modified, so we have to have a negative addend to compensate.
-
- Note that symbols which used to be common must be left alone */
-
- if (ptr && ptr->the_bfd == abfd
- && ptr->section != (asection *) NULL
- && ((ptr->flags & BSF_OLD_COMMON)== 0))
- {
-#ifndef M88
- cache_ptr->addend = -(ptr->section->vma + ptr->value);
+ RELOC *native_relocs;
+ arelent *reloc_cache;
+ arelent *cache_ptr;
+
+ unsigned int idx;
+
+ if (asect->relocation)
+ return true;
+ if (asect->reloc_count == 0)
+ return true;
+ if (asect->flags & SEC_CONSTRUCTOR)
+ return true;
+ if (!coff_slurp_symbol_table(abfd))
+ return false;
+ native_relocs =
+ (RELOC *) buy_and_read(abfd,
+ asect->rel_filepos,
+ SEEK_SET,
+ (size_t) (RELSZ *
+ asect->reloc_count));
+ reloc_cache = (arelent *)
+ bfd_alloc(abfd, (size_t) (asect->reloc_count * sizeof(arelent)));
+
+ if (reloc_cache == NULL) {
+ bfd_error = no_memory;
+ return false;
+ }
+
+
+ for (idx = 0; idx < asect->reloc_count; idx ++)
+ {
+#ifdef RELOC_PROCESSING
+ struct internal_reloc dst;
+ struct external_reloc *src;
+
+ cache_ptr = reloc_cache + idx;
+ src = native_relocs + idx;
+ bfd_swap_reloc_in(abfd, src, &dst);
+
+ RELOC_PROCESSING(cache_ptr, &dst, symbols, abfd, asect);
#else
- cache_ptr->addend = 0;
-#endif
+ struct internal_reloc dst;
+ asymbol *ptr;
+ struct external_reloc *src;
- }
- else {
- cache_ptr->addend = 0;
- }
+ cache_ptr = reloc_cache + idx;
+ src = native_relocs + idx;
- cache_ptr->address -= asect->vma;
+ bfd_swap_reloc_in(abfd, src, &dst);
- cache_ptr->section = (asection *) NULL;
-#ifdef A29K
- if (dst.r_type == R_IHCONST) {
- /* Add in the value which was stored in the symbol index */
- /* See above comment */
- cache_ptr->addend += dst.r_symndx;
- /* Throw away the bogus symbol pointer */
- cache_ptr->sym_ptr_ptr = 0;
- }
- cache_ptr->howto = howto_table + dst.r_type;
-#endif
-#if I386
- cache_ptr->howto = howto_table + dst.r_type;
-#endif
-#if I960
- cache_ptr->howto = howto_table + dst.r_type;
-#endif
-#if M68
- cache_ptr->howto = howto_table + dst.r_type - R_RELBYTE;
-#endif
-#if M88
- if (dst.r_type >= R_PCR16L && dst.r_type <= R_VRT32) {
- cache_ptr->howto = howto_table + dst.r_type - R_PCR16L;
- cache_ptr->addend += dst.r_offset << 16;
- }
- else {
- BFD_ASSERT(0);
- }
-#endif
+ cache_ptr->address = dst.r_vaddr;
+
+ if (dst.r_symndx != -1)
+ {
+ /* @@ Should never be greater than count of symbols! */
+ if (dst.r_symndx >= obj_conv_table_size (abfd))
+ abort ();
+ cache_ptr->sym_ptr_ptr = symbols + obj_convert(abfd)[dst.r_symndx];
+ ptr = *(cache_ptr->sym_ptr_ptr);
+ }
+ else
+ {
+ cache_ptr->sym_ptr_ptr= bfd_abs_section.symbol_ptr_ptr;
+ ptr = 0;
}
- }
- asect->relocation = reloc_cache;
- return true;
+ /*
+ The symbols definitions that we have read in have been
+ relocated as if their sections started at 0. But the offsets
+ refering to the symbols in the raw data have not been
+ modified, so we have to have a negative addend to compensate.
+
+ Note that symbols which used to be common must be left alone */
+
+ /* Calculate any reloc addend by looking at the symbol */
+ CALC_ADDEND(abfd, ptr, dst, cache_ptr);
+
+ cache_ptr->address -= asect->vma;
+/* !! cache_ptr->section = (asection *) NULL;*/
+
+ /* Fill in the cache_ptr->howto field from dst.r_type */
+ RTYPE2HOWTO(cache_ptr, &dst);
+#endif
+
+ }
+
+ asect->relocation = reloc_cache;
+ return true;
}
arelent **relptr AND
asymbol **symbols)
{
- arelent *tblptr = section->relocation;
- unsigned int count = 0;
+ arelent *tblptr = section->relocation;
+ unsigned int count = 0;
- if (section->flags & SEC_CONSTRUCTOR)
+ if (section->flags & SEC_CONSTRUCTOR)
+ {
+ /* this section has relocs made up by us, they are not in the
+ file, so take them out of their chain and place them into
+ the data area provided */
+ arelent_chain *chain = section->constructor_chain;
+ for (count = 0; count < section->reloc_count; count ++)
{
- /* this section has relocs made up by us, they are not in the
- file, so take them out of their chain and place them into
- the data area provided */
- arelent_chain *chain = section->constructor_chain;
- for (count = 0; count < section->reloc_count; count ++)
- {
- *relptr ++ = &chain->relent;
- chain = chain->next;
- }
-
- }
- else
- {
- coff_slurp_reloc_table(abfd, section, symbols);
-
-
- tblptr = section->relocation;
- if (!tblptr)
- return 0;
-
- for (; count++ < section->reloc_count;)
- *relptr++ = tblptr++;
-
-
+ *relptr ++ = &chain->relent;
+ chain = chain->next;
}
- *relptr = 0;
- return section->reloc_count;
-}
-#ifndef NO_COFF_SYMBOLS
-
-/*
-provided a BFD, a section and an offset into the section, calculate and
-return the name of the source file and the line nearest to the wanted
-location.
-*/
+ }
+ else
+ {
+ coff_slurp_reloc_table(abfd, section, symbols);
-static boolean
-DEFUN(coff_find_nearest_line,(abfd,
- section,
- ignore_symbols,
- offset,
- filename_ptr,
- functionname_ptr,
- line_ptr),
- bfd *abfd AND
- asection *section AND
- asymbol **ignore_symbols AND
- bfd_vma offset AND
- CONST char **filename_ptr AND
- CONST char **functionname_ptr AND
- unsigned int *line_ptr)
-{
- static bfd *cache_abfd;
- static asection *cache_section;
- static bfd_vma cache_offset;
- static unsigned int cache_i;
- static alent *cache_l;
-
- unsigned int i = 0;
- coff_data_type *cof = coff_data(abfd);
- /* Run through the raw syments if available */
- combined_entry_type *p;
- alent *l;
- unsigned int line_base = 0;
-
-
- *filename_ptr = 0;
- *functionname_ptr = 0;
- *line_ptr = 0;
-
- /* Don't try and find line numbers in a non coff file */
- if (abfd->xvec->flavour != bfd_target_coff_flavour)
- return false;
- if (cof == NULL)
- return false;
+ tblptr = section->relocation;
+ if (!tblptr)
+ return 0;
- p = cof->raw_syments;
+ for (; count++ < section->reloc_count;)
+ *relptr++ = tblptr++;
- for (i = 0; i < cof->raw_syment_count; i++) {
- if (p->u.syment.n_sclass == C_FILE) {
- /* File name has been moved into symbol */
- *filename_ptr = (char *) p->u.syment._n._n_n._n_offset;
- break;
- }
- p += 1 + p->u.syment.n_numaux;
- }
- /* Now wander though the raw linenumbers of the section */
- /*
- If this is the same BFD as we were previously called with and this is
- the same section, and the offset we want is further down then we can
- prime the lookup loop
- */
- if (abfd == cache_abfd &&
- section == cache_section &&
- offset >= cache_offset) {
- i = cache_i;
- l = cache_l;
- }
- else {
- i = 0;
- l = section->lineno;
- }
- for (; i < section->lineno_count; i++) {
- if (l->line_number == 0) {
- /* Get the symbol this line number points at */
- coff_symbol_type *coff = (coff_symbol_type *) (l->u.sym);
- *functionname_ptr = coff->symbol.name;
- if (coff->native) {
- combined_entry_type *s = coff->native;
- s = s + 1 + s->u.syment.n_numaux;
- /*
- S should now point to the .bf of the function
- */
- if (s->u.syment.n_numaux) {
- /*
- The linenumber is stored in the auxent
- */
- union internal_auxent *a = &((s + 1)->u.auxent);
- line_base = a->x_sym.x_misc.x_lnsz.x_lnno;
- }
- }
- }
- else {
- if (l->u.offset > offset)
- break;
- *line_ptr = l->line_number + line_base + 1;
- }
- l++;
}
-
- cache_abfd = abfd;
- cache_section = section;
- cache_offset = offset;
- cache_i = i;
- cache_l = l;
-
- return true;
+ *relptr = 0;
+ return section->reloc_count;
}
#ifdef GNU960
}
#endif
-#endif /* NO_COFF_SYMBOLS */
-
-
-static int
-DEFUN(coff_sizeof_headers,(abfd, reloc),
- bfd *abfd AND
- boolean reloc)
+#ifndef coff_reloc16_extra_cases
+#define coff_reloc16_extra_cases dummy_reloc16_extra_cases
+/* This works even if abort is not declared in any header file. */
+void
+dummy_reloc16_extra_cases (abfd, seclet, reloc, data, src_ptr, dst_ptr)
+ bfd *abfd;
+ struct bfd_seclet *seclet;
+ arelent *reloc;
+ bfd_byte *data;
+ unsigned int *src_ptr;
+ unsigned int *dst_ptr;
{
- size_t size;
-
- if (reloc == false) {
- size = FILHSZ + AOUTSZ;
- }
- else {
- size = FILHSZ;
- }
-
- size += abfd->section_count * SCNHSZ;
- return size;
+ abort ();
}
+#endif
+static CONST bfd_coff_backend_data bfd_coff_std_swap_table = {
+ coff_swap_aux_in, coff_swap_sym_in, coff_swap_lineno_in,
+ coff_swap_aux_out, coff_swap_sym_out,
+ coff_swap_lineno_out, coff_swap_reloc_out,
+ coff_swap_filehdr_out, coff_swap_aouthdr_out,
+ coff_swap_scnhdr_out,
+ FILHSZ, AOUTSZ, SCNHSZ, SYMESZ, AUXESZ, LINESZ,
+#ifdef COFF_LONG_FILENAMES
+ true,
+#else
+ false,
+#endif
+ coff_swap_filehdr_in, coff_swap_aouthdr_in, coff_swap_scnhdr_in,
+ coff_bad_format_hook, coff_set_arch_mach_hook, coff_mkobject_hook,
+ styp_to_sec_flags, coff_make_section_hook, coff_set_alignment_hook,
+ coff_slurp_symbol_table, symname_in_debug_hook, coff_reloc16_extra_cases
+};
#define coff_core_file_failing_command _bfd_dummy_core_file_failing_command
#define coff_core_file_failing_signal _bfd_dummy_core_file_failing_signal
#define coff_get_section_contents bfd_generic_get_section_contents
#define coff_close_and_cleanup bfd_generic_close_and_cleanup
-#define coff_bfd_debug_info_start bfd_void
+#define coff_bfd_debug_info_start bfd_void
#define coff_bfd_debug_info_end bfd_void
-#define coff_bfd_debug_info_accumulate (PROTO(void,(*),(bfd*, struct sec *))) bfd_void
+#define coff_bfd_debug_info_accumulate \
+ (void (*) PARAMS ((bfd *, struct sec *))) bfd_void
+#define coff_bfd_get_relocated_section_contents bfd_generic_get_relocated_section_contents
+#define coff_bfd_relax_section bfd_generic_relax_section
+#define coff_bfd_seclet_link bfd_generic_seclet_link
+#define coff_bfd_reloc_type_lookup \
+ ((CONST struct reloc_howto_struct *(*) PARAMS ((bfd *, bfd_reloc_code_real_type))) bfd_nullvoidptr)