#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12.1
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --enable-shared build shared libraries [default=no]
- --enable-shared=PKGS only build shared libraries if the current package
- appears as an element in the PKGS list"
+ --enable-shared[=PKGS] build shared libraries [default=no]"
ac_help="$ac_help
- --enable-static build static libraries [default=yes]
- --enable-static=PKGS only build shared libraries if the current package
- appears as an element in the PKGS list"
+ --enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12.1"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:596: checking host system type" >&5
+echo "configure:609: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:617: checking target system type" >&5
+echo "configure:630: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:635: checking build system type" >&5
+echo "configure:648: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:660: checking for $ac_word" >&5
+echo "configure:673: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:689: checking for $ac_word" >&5
+echo "configure:703: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:754: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:737: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:786: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
-cat > conftest.$ac_ext <<EOF
-#line 747 "configure"
+cat > conftest.$ac_ext << EOF
+
+#line 797 "configure"
#include "confdefs.h"
+
main(){return(0);}
EOF
-if { (eval echo configure:751: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:771: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:828: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:776: checking whether we are using GNU C" >&5
+echo "configure:833: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:785: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:800: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:861: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:828: checking for POSIXized ISC" >&5
+echo "configure:893: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:861: checking for a BSD compatible install" >&5
+echo "configure:926: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:915: checking whether build environment is sane" >&5
+echo "configure:979: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:972: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1036: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
PACKAGE=bfd
-VERSION=2.9.4
+VERSION=2.9.5
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1018: checking for working aclocal" >&5
+echo "configure:1082: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1031: checking for working autoconf" >&5
+echo "configure:1095: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1044: checking for working automake" >&5
+echo "configure:1108: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1057: checking for working autoheader" >&5
+echo "configure:1121: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1070: checking for working makeinfo" >&5
+echo "configure:1134: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1093: checking for $ac_word" >&5
+echo "configure:1157: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_AR="${ac_tool_prefix}ar"
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1124: checking for $ac_word" >&5
+echo "configure:1189: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1155: checking for $ac_word" >&5
+echo "configure:1221: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
enable_static=yes
fi
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1237: checking for $ac_word" >&5
+echo "configure:1327: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
with_gnu_ld=no
fi
-
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1276: checking for ld used by GCC" >&5
+echo "configure:1366: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
- # Accept absolute paths.
- /* | [A-Za-z]:\\*)
- test -z "$LD" && LD="$ac_prog"
- ;;
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1294: checking for GNU ld" >&5
+echo "configure:1390: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1297: checking for non-GNU ld" >&5
+echo "configure:1393: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
- test "$with_gnu_ld" != yes && break
+ test "$with_gnu_ld" != yes && break
fi
fi
done
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1333: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1428: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1349: checking for BSD-compatible nm" >&5
+echo "configure:1444: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -z "$NM"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+ if test -n "$NM"; then
+ # Let the user override the test.
+ ac_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ ac_cv_path_NM="$ac_dir/nm -B"
+ break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ ac_cv_path_NM="$ac_dir/nm -p"
+ break
else
- ac_cv_path_NM="$ac_dir/nm"
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
fi
- break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-else
- ac_cv_path_NM="$NM" # Let the user override the test with a path.
fi
fi
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1383: checking whether ln -s works" >&5
+echo "configure:1480: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
# Check for any special flags to pass to ltconfig.
-libtool_flags=
+libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1419 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1420: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1529 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
- ;;
-
-*-*-cygwin32*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1445: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:1551: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ cat > conftest.$ac_ext <<EOF
+#line 1556 "configure"
+#include "confdefs.h"
+int main() {
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1476: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+; return 0; }
+EOF
+if { (eval echo configure:1563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
+rm -f conftest*
fi
-else
- DLLTOOL="false"
-fi
-fi
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1510: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+esac
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1541: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
else
- echo "$ac_t""no" 1>&6
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
fi
+rm -f confcache
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
else
- AS="false"
-fi
+ echo "creating cache $cache_file"
+ > $cache_file
fi
- ;;
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-esac
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
# Check whether --enable-64-bit-bfd or --disable-64-bit-bfd was given.
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1656: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1735: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
fi
echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
- if test $USE_MAINTAINER_MODE = yes; then
- MAINT=
- else
- MAINT='#M#'
- fi
-echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6
-echo "configure:1674: checking for Cygwin32 environment" >&5
-if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:1758: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1679 "configure"
+#line 1763 "configure"
#include "confdefs.h"
int main() {
-return __CYGWIN32__;
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:1686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- am_cv_cygwin32=yes
+ ac_cv_cygwin=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- am_cv_cygwin32=no
+ ac_cv_cygwin=no
fi
rm -f conftest*
rm -f conftest*
fi
-echo "$ac_t""$am_cv_cygwin32" 1>&6
-CYGWIN32=
-test "$am_cv_cygwin32" = yes && CYGWIN32=yes
-echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
-echo "configure:1703: checking for Mingw32 environment" >&5
-if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:1791: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1708 "configure"
+#line 1796 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:1715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1803: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- am_cv_mingw32=yes
+ ac_cv_mingw32=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- am_cv_mingw32=no
+ ac_cv_mingw32=no
fi
rm -f conftest*
rm -f conftest*
fi
-echo "$ac_t""$am_cv_mingw32" 1>&6
+echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
-test "$am_cv_mingw32" = yes && MINGW32=yes
+test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1734: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+echo "configure:1822: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
-am_cv_exeext=.exe
-else
-cat > am_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=
-for file in am_c_test.*; do
- case $file in
- *.c) ;;
- *.o) ;;
- *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
- esac
-done
-rm -f am_c_test*
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
-
-test x"${am_cv_exeext}" = x && am_cv_exeext=no
fi
+
EXEEXT=""
-test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
-echo "$ac_t""${am_cv_exeext}" 1>&6
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
host64=false
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1773: checking for $ac_word" >&5
+echo "configure:1861: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1802: checking for $ac_word" >&5
+echo "configure:1891: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
echo "$ac_t""no" 1>&6
fi
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1942: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1850: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1974: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
-cat > conftest.$ac_ext <<EOF
-#line 1860 "configure"
+cat > conftest.$ac_ext << EOF
+
+#line 1985 "configure"
#include "confdefs.h"
+
main(){return(0);}
EOF
-if { (eval echo configure:1864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1884: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2016: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1889: checking whether we are using GNU C" >&5
+echo "configure:2021: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1898: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1913: checking whether ${CC-cc} accepts -g" >&5
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:2049: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
- CFLAGS="-O2"
+ CFLAGS="-g"
fi
else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
fi
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1943: checking how to run the C preprocessor" >&5
+echo "configure:2083: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1958 "configure"
+#line 2098 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1964: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1975 "configure"
+#line 2115 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 2132 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1981: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2138: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
fi
rm -f conftest*
fi
+rm -f conftest*
+fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2004: checking for ANSI C header files" >&5
+echo "configure:2163: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2009 "configure"
+#line 2168 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2017: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2176: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_cv_header_stdc=yes
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2034 "configure"
+#line 2193 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2052 "configure"
+#line 2211 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2073 "configure"
+#line 2232 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2108: checking for working const" >&5
+echo "configure:2267: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2113 "configure"
+#line 2272 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2162: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2321: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2183: checking for inline" >&5
+echo "configure:2342: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2190 "configure"
+#line 2349 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2197: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2223: checking for off_t" >&5
+echo "configure:2382: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2228 "configure"
+#line 2387 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_off_t=yes
else
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2256: checking for size_t" >&5
+echo "configure:2415: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2261 "configure"
+#line 2420 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_size_t=yes
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2291: checking for working alloca.h" >&5
+echo "configure:2450: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2296 "configure"
+#line 2455 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2324: checking for alloca" >&5
+echo "configure:2483: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2329 "configure"
+#line 2488 "configure"
#include "confdefs.h"
#ifdef __GNUC__
# define alloca __builtin_alloca
#else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
# else
-# ifdef _AIX
- #pragma alloca
+# if HAVE_ALLOCA_H
+# include <alloca.h>
# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
+# endif
# endif
# endif
# endif
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
# that cause trouble. Some versions do not even contain alloca or
# contain a buggy version. If you still want to use their alloca,
# use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.o
+ ALLOCA=alloca.${ac_objext}
cat >> confdefs.h <<\EOF
#define C_ALLOCA 1
EOF
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2384: checking whether alloca needs Cray hooks" >&5
+echo "configure:2548: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2389 "configure"
+#line 2553 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2414: checking for $ac_func" >&5
+echo "configure:2578: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2419 "configure"
+#line 2583 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2469: checking stack direction for C alloca" >&5
+echo "configure:2633: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2477 "configure"
+#line 2641 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2521: checking for $ac_hdr" >&5
+echo "configure:2685: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2526 "configure"
+#line 2690 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2531: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2560: checking for $ac_func" >&5
+echo "configure:2724: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2565 "configure"
+#line 2729 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2613: checking for working mmap" >&5
+echo "configure:2777: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2621 "configure"
+#line 2785 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2761: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2789: checking for $ac_hdr" >&5
+echo "configure:2953: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2794 "configure"
+#line 2958 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2799: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2963: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2829: checking for $ac_func" >&5
+echo "configure:2993: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2834 "configure"
+#line 2998 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2886: checking for $ac_func" >&5
+echo "configure:3050: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2891 "configure"
+#line 3055 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2948: checking for LC_MESSAGES" >&5
+echo "configure:3112: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2953 "configure"
+#line 3117 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:2960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2981: checking whether NLS is requested" >&5
+echo "configure:3145: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3001: checking whether included gettext is requested" >&5
+echo "configure:3165: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3020: checking for libintl.h" >&5
+echo "configure:3184: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3025 "configure"
+#line 3189 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:3194: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3047: checking for gettext in libc" >&5
+echo "configure:3211: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3052 "configure"
+#line 3216 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3075: checking for bindtextdomain in -lintl" >&5
+echo "configure:3239: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3083 "configure"
+#line 3247 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3110: checking for gettext in libintl" >&5
+echo "configure:3274: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3115 "configure"
+#line 3279 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3150: checking for $ac_word" >&5
+echo "configure:3314: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3184: checking for $ac_func" >&5
+echo "configure:3348: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3189 "configure"
+#line 3353 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3239: checking for $ac_word" >&5
+echo "configure:3403: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3274: checking for $ac_word" >&5
+echo "configure:3439: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3306 "configure"
+#line 3471 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:3479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3346: checking for $ac_word" >&5
+echo "configure:3511: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3380: checking for $ac_word" >&5
+echo "configure:3545: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3415: checking for $ac_word" >&5
+echo "configure:3581: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3505: checking for catalogs to be installed" >&5
+echo "configure:3671: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3533: checking for linux/version.h" >&5
+echo "configure:3699: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3538 "configure"
+#line 3704 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3543: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:3709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
. ${srcdir}/configure.host
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:3787: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
BFD_HOST_64BIT_LONG=0
BFD_HOST_64_BIT_DEFINED=0
EXEEXT_FOR_BUILD='$(EXEEXT)'
else
echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:3643: checking for build system executable suffix" >&5
+echo "configure:3870: checking for build system executable suffix" >&5
if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > ac_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
- ${CC_FOR_BUILD} -o ac_c_test am_c_test.c 1>&5 2>&5
- bfd_cv_build_exeext=`echo ac_c_test.* | grep -v ac_c_test.c | sed -e s/ac_c_test//`
- rm -f ac_c_test*
- test x"${bfd_cv_build_exeext}" = x && bfd_cv_build_exeext=no
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.c
+ bfd_cv_build_exeext=
+ ${CC_FOR_BUILD} -o conftest conftest.c 1>&5 2>&5
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) bfd_cv_build_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ rm -f conftest*
+ test x"${bfd_cv_build_exeext}" = x && bfd_cv_build_exeext=no
fi
echo "$ac_t""$bfd_cv_build_exeext" 1>&6
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3668: checking for $ac_hdr" >&5
+echo "configure:3898: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3673 "configure"
+#line 3903 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:3908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3708: checking for $ac_hdr" >&5
+echo "configure:3938: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3713 "configure"
+#line 3943 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:3948: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
done
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:3745: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:3975: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3750 "configure"
+#line 3980 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:3759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
-for ac_func in fcntl getpagesize setitimer sysconf fdopen
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
+echo "configure:4014: checking for $ac_hdr that defines DIR" >&5
+if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4019 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <$ac_hdr>
+int main() {
+DIR *dirp = 0;
+; return 0; }
+EOF
+if { (eval echo configure:4027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ eval "ac_cv_header_dirent_$ac_safe=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_dirent_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ ac_header_dirent=$ac_hdr; break
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
+echo "configure:4052: checking for opendir in -ldir" >&5
+ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldir $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4060 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
+
+int main() {
+opendir()
+; return 0; }
+EOF
+if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -ldir"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
+echo "configure:4093: checking for opendir in -lx" >&5
+ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lx $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4101 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char opendir();
+
+int main() {
+opendir()
+; return 0; }
+EOF
+if { (eval echo configure:4112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ LIBS="$LIBS -lx"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+for ac_func in fcntl getpagesize setitimer sysconf fdopen getuid getgid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3782: checking for $ac_func" >&5
+echo "configure:4137: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3787 "configure"
+#line 4142 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:4165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
case "${host}" in
-i[345]86-*-msdos* | i[345]86-*-go32* | i[345]86-*-mingw32* | *-*-cygwin32* | *-*-windows)
+*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*)
cat >> confdefs.h <<\EOF
#define USE_BINARY_FOPEN 1
EOF
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:3845: checking whether strstr must be declared" >&5
+echo "configure:4200: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3850 "configure"
+#line 4205 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:3871: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
echo "$ac_t""$bfd_cv_decl_needed_strstr" 1>&6
if test $bfd_cv_decl_needed_strstr = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo strstr | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_STRSTR 1
EOF
fi
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:3893: checking whether malloc must be declared" >&5
+echo "configure:4247: checking whether malloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3898 "configure"
+#line 4252 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:3919: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
echo "$ac_t""$bfd_cv_decl_needed_malloc" 1>&6
if test $bfd_cv_decl_needed_malloc = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo malloc | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_MALLOC 1
EOF
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:3941: checking whether realloc must be declared" >&5
+echo "configure:4294: checking whether realloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3946 "configure"
+#line 4299 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:3967: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
echo "$ac_t""$bfd_cv_decl_needed_realloc" 1>&6
if test $bfd_cv_decl_needed_realloc = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo realloc | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_REALLOC 1
EOF
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:3989: checking whether free must be declared" >&5
+echo "configure:4341: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3994 "configure"
+#line 4346 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4367: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
echo "$ac_t""$bfd_cv_decl_needed_free" 1>&6
if test $bfd_cv_decl_needed_free = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo free | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_FREE 1
EOF
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4037: checking whether getenv must be declared" >&5
+echo "configure:4388: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4042 "configure"
+#line 4393 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4063: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
echo "$ac_t""$bfd_cv_decl_needed_getenv" 1>&6
if test $bfd_cv_decl_needed_getenv = yes; then
- bfd_tr_decl=NEED_DECLARATION_`echo getenv | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $bfd_tr_decl 1
+ cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_GETENV 1
EOF
fi
# If we are configured native, pick a core file support file.
COREFILE=
COREFLAG=
+TRAD_HEADER=
if test "${target}" = "${host}"; then
case "${host}" in
alpha*-*-linux-gnu*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/alphalinux.h"
-EOF
-
+ TRAD_HEADER='"hosts/alphalinux.h"'
;;
alpha*-*-netbsd*) COREFILE=netbsd-core.lo ;;
alpha*-*-*) COREFILE=osf-core.lo ;;
arm-*-riscix) COREFILE=trad-core.lo ;;
hppa*-*-hpux*) COREFILE=hpux-core.lo ;;
hppa*-*-hiux*) COREFILE=hpux-core.lo ;;
+ hppa*-*-mpeix*) COREFILE=hpux-core.lo ;;
hppa*-*-bsd*) COREFILE="hpux-core.lo hppabsd-core.lo"
COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
- i[3456]86-sequent-bsd*)
- COREFILE=trad-core.lo;
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/symmetry.h"
-EOF
+ i370-*-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i370linux.h"'
+ ;;
+ i[3456]86-sequent-bsd*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/symmetry.h"'
;;
i[3456]86-sequent-sysv4*) ;;
i[3456]86-sequent-sysv*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/symmetry.h"
-EOF
-
+ TRAD_HEADER='"hosts/symmetry.h"'
;;
i[3456]86-*-bsd* | i[3456]86-*-freebsd*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386bsd.h"
-EOF
-
+ TRAD_HEADER='"hosts/i386bsd.h"'
;;
i[3456]86-*-netbsd* | i[3456]86-*-openbsd*)
COREFILE=netbsd-core.lo
;;
i[3456]86-esix-sysv3*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/esix.h"
-EOF
-
+ TRAD_HEADER='"hosts/esix.h"'
+ ;;
+ i[3456]86-*-sco3.2v5*)
+ COREFILE=sco5-core.lo
;;
i[3456]86-*-sco* | i[3456]86-*-isc*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386sco.h"
-EOF
-
+ TRAD_HEADER='"hosts/i386sco.h"'
;;
i[3456]86-*-mach3*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386mach3.h"
-EOF
-
+ TRAD_HEADER='"hosts/i386mach3.h"'
;;
i[3456]86-*-linux-gnu*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i386linux.h"
-EOF
-
+ TRAD_HEADER='"hosts/i386linux.h"'
;;
i[3456]86-*-isc*) COREFILE=trad-core.lo ;;
i[3456]86-*-aix*) COREFILE=aix386-core.lo ;;
i860-*-mach3* | i860-*-osf1*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/i860mach3.h"
-EOF
-
+ TRAD_HEADER='"hosts/i860mach3.h"'
;;
mips-dec-bsd*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/mipsbsd.h"
-EOF
-
+ TRAD_HEADER='"hosts/mipsbsd.h"'
;;
mips-dec-mach3*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/mipsmach3.h"
-EOF
-
+ TRAD_HEADER='"hosts/mipsmach3.h"'
;;
mips-*-netbsd* | mips*-*-openbsd*)
COREFILE=netbsd-core.lo
;;
mips-dec-*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/decstation.h"
-EOF
-
+ TRAD_HEADER='"hosts/decstation.h"'
;;
mips-sgi-irix4*) COREFILE=irix-core.lo ;;
mips-sgi-irix5*) COREFILE=irix-core.lo ;;
mips-sgi-irix6*) COREFILE=irix-core.lo ;;
mips-*-mach3*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/mipsmach3.h"
-EOF
-
+ TRAD_HEADER='"hosts/mipsmach3.h"'
;;
mips-*-sysv4*) ;;
mips-*-sysv* | mips-*-riscos*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/riscos.h"
-EOF
-
+ TRAD_HEADER='"hosts/riscos.h"'
;;
mips-sony-bsd*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/news-mips.h"
-EOF
-
+ TRAD_HEADER='"hosts/news-mips.h"'
;;
m68*-bull*-sysv*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/dpx2.h"
-EOF
-
+ TRAD_HEADER='"hosts/dpx2.h"'
;;
m68*-hp-hpux*) COREFILE=hpux-core.lo ;;
m68*-hp-bsd*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/hp300bsd.h"
-EOF
-
+ TRAD_HEADER='"hosts/hp300bsd.h"'
;;
m68*-*-linux-gnu*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/m68klinux.h"
-EOF
-
+ TRAD_HEADER='"hosts/m68klinux.h"'
;;
m68*-motorola-sysv*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/delta68.h"
-EOF
-
+ TRAD_HEADER='"hosts/delta68.h"'
;;
m68*-sony-*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/news.h"
-EOF
-
+ TRAD_HEADER='"hosts/news.h"'
;;
m68*-*-netbsd* | m68*-*-openbsd*)
COREFILE=netbsd-core.lo
;;
m68*-apple-aux*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/m68kaux.h"
-EOF
-
+ TRAD_HEADER='"hosts/m68kaux.h"'
;;
m88*-*-sysv4*) ;;
m88*-motorola-sysv*) COREFILE=ptrace-core.lo ;;
m88*-*-mach3*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/m88kmach3.h"
-EOF
-
+ TRAD_HEADER='"hosts/m88kmach3.h"'
;;
ns32k-pc532-mach)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/pc532mach.h"
-EOF
-
+ TRAD_HEADER='"hosts/pc532mach.h"'
;;
ns32k-*-netbsd* | ns32k-*-openbsd*)
COREFILE=netbsd-core.lo
;;
tahoe-*-*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/tahoe.h"
-EOF
-
+ TRAD_HEADER='"hosts/tahoe.h"'
;;
vax-*-ultrix2*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/vaxult2.h"
-EOF
-
+ TRAD_HEADER='"hosts/vaxult2.h"'
;;
vax-*-ultrix*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/vaxult2.h"
-EOF
-
+ TRAD_HEADER='"hosts/vaxult2.h"'
;;
vax-*-*)
COREFILE=trad-core.lo
- cat >> confdefs.h <<\EOF
-#define TRAD_HEADER "hosts/vaxbsd.h"
-EOF
-
+ TRAD_HEADER='"hosts/vaxbsd.h"'
;;
esac
osf-core.lo) COREFLAG=-DOSF_CORE ;;
ptrace-core.lo) COREFLAG=-DPTRACE_CORE ;;
rs6000-core.lo) COREFLAG="$COREFLAG -DAIX_CORE" ;;
+ sco5-core.lo) COREFLAG="$COREFLAG -DSCO5_CORE" ;;
trad-core.lo) COREFLAG="$COREFLAG -DTRAD_CORE" ;;
esac
- # The ELF code uses the native <sys/procfs.h> to handle core files.
- # Define HAVE_SYS_PROCFS_H if the file exists and defines
- # prstatus_t.
- echo $ac_n "checking for sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4338: checking for sys/procfs.h" >&5
- if eval "test \"`echo '$''{'bfd_cv_header_sys_procfs_h'+set}'`\" = set"; then
+ # ELF corefile support has several flavors, but all of
+ # them use something called <sys/procfs.h>
+ for ac_hdr in sys/procfs.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4620: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4625 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ if test "$ac_cv_header_sys_procfs_h" = yes; then
+ echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4658: checking for prstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4343 "configure"
+#line 4663 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
-prstatus_t t;
+prstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_header_sys_procfs_h=yes
+ bfd_cv_have_sys_procfs_type_prstatus_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_header_sys_procfs_h=no
+ bfd_cv_have_sys_procfs_type_prstatus_t=no
+
fi
rm -f conftest*
fi
- echo "$ac_t""$bfd_cv_header_sys_procfs_h" 1>&6
- if test $bfd_cv_header_sys_procfs_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_PROCFS_H 1
+ if test $bfd_cv_have_sys_procfs_type_prstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS_T 1
EOF
- fi
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
+
+ echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4692: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4697 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+prstatus_t avar; void* aref = (void*) &avar.pr_who
+; return 0; }
+EOF
+if { (eval echo configure:4704: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS_T_PR_WHO 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
+
+ echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4726: checking for pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4731 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+pstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4738: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_pstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_pstatus_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_pstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
+
+ echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4760: checking for prpsinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4765 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+prpsinfo_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4772: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prpsinfo_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_prpsinfo_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRPSINFO_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
+
+ echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4794: checking for psinfo_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4799 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+psinfo_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_psinfo_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSINFO_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
+
+ echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4828: checking for lwpstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4833 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+lwpstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4840: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpstatus_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_lwpstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
+
+ echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4862: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4867 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+lwpstatus_t avar; void* aref = (void*) &avar.pr_context
+; return 0; }
+EOF
+if { (eval echo configure:4874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPSTATUS_T_PR_CONTEXT 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
+
+ echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4896: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4901 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
+; return 0; }
+EOF
+if { (eval echo configure:4908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPSTATUS_T_PR_REG 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg" 1>&6
+ echo $ac_n "checking for win32_pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4930: checking for win32_pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_win32_pstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4935 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+win32_pstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4942: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_win32_pstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_win32_pstatus_t=no
+
+fi
+rm -f conftest*
fi
+ if test $bfd_cv_have_sys_procfs_type_win32_pstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_WIN32_PSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_win32_pstatus_t" 1>&6
+
+ fi
+fi
+
+
+cat >> confdefs.h <<EOF
+#define TRAD_HEADER $TRAD_HEADER
+EOF
# Horrible hacks to build DLLs on Windows.
WIN32LDFLAGS=
WIN32LIBADD=
case "${host}" in
-*-*-cygwin32*)
+*-*-cygwin*)
if test "$enable_shared" = "yes"; then
WIN32LDFLAGS="-no-undefined"
- WIN32LIBADD="-L`pwd`/../libiberty -liberty -lcygwin -lkernel32"
+ WIN32LIBADD="-L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin -lkernel32"
fi
;;
esac
if test -n "$enable_targets" ; then
for targ in `echo $enable_targets | sed 's/,/ /g'`
do
- result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $targ 2>/dev/null`
+ result=`$ac_config_sub $targ 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
else
# 64-bit support needs to be compiled in. Currently, it will be included if
# the default or any other explicitly requested target requires it; it
# will not be included on a 32-bit host if no 64-bit target is requested, and
-# no "--with-64-bit-bfd" option is given, even if "--with-targets=all" is
+# no "--with-64-bit-bfd" option is given, even if "--enable-targets=all" is
# used.
# uniq the default and selected vectors in all the configured targets.
done
selvecs="$f"
-# start-sanitize-sky
-# dvp is really mips, but we need to distinguish it from mips for opcodes
-selarchs=`echo $selarchs | sed -e s/dvp/mips/g`
-# end-sanitize-sky
# uniq the architectures in all the configured targets.
f=""
# Target backend .o files.
tb=
-elf="elf.lo elflink.lo dwarf2.lo"
+elf="elf.lo elflink.lo dwarf2.lo dwarf1.lo"
for vec in $selvecs
do
a_out_adobe_vec) tb="$tb aout-adobe.lo aout32.lo" ;;
armcoff_little_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
armcoff_big_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
- armpe_little_vec) tb="$tb pe-arm.lo coff-arm.lo cofflink.lo " ;;
- armpe_big_vec) tb="$tb pe-arm.lo coff-arm.lo cofflink.lo " ;;
- armpei_little_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
- armpei_big_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
+ armnetbsd_vec) tb="$tb armnetbsd.lo aout32.lo" ;;
+ armpe_little_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpe_big_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_little_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_big_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_little_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_big_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_little_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_big_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
aout0_big_vec) tb="$tb aout0.lo aout32.lo" ;;
aout_arm_big_vec) tb="$tb aout-arm.lo aout32.lo" ;;
aout_arm_little_vec) tb="$tb aout-arm.lo aout32.lo" ;;
bfd_elf64_alpha_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"
target64=true ;;
bfd_elf32_littlearc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
+ bfd_elf32_littlearm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
+ bfd_elf32_littlearm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
bfd_elf32_bigarc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
+ bfd_elf32_bigarm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
+ bfd_elf32_bigarm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
bfd_elf32_big_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
bfd_elf32_bigmips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf64_bigmips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
target64=true ;;
bfd_elf32_d10v_vec) tb="$tb elf32-d10v.lo elf32.lo $elf" ;;
-# start-sanitize-d30v
bfd_elf32_d30v_vec) tb="$tb elf32-d30v.lo elf32.lo $elf" ;;
-# end-sanitize-d30v
+ bfd_elf32_fr30_vec) tb="$tb elf32-fr30.lo elf32.lo $elf" ;;
bfd_elf32_hppa_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
+ bfd_elf32_i370_vec) tb="$tb elf32-i370.lo elf32.lo $elf" ;;
bfd_elf32_i386_vec) tb="$tb elf32-i386.lo elf32.lo $elf" ;;
bfd_elf32_i860_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
+ bfd_elf32_i960_vec) tb="$tb elf32-i960.lo elf32.lo $elf" ;;
bfd_elf32_little_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
bfd_elf32_littlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf64_littlemips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
bfd_elf32_m32r_vec) tb="$tb elf32-m32r.lo elf32.lo $elf" ;;
bfd_elf32_m68k_vec) tb="$tb elf32-m68k.lo elf32.lo $elf" ;;
bfd_elf32_m88k_vec) tb="$tb elf32-m88k.lo elf32.lo $elf" ;;
+ bfd_elf32_mcore_big_vec) tb="$tb elf32-mcore.lo elf32.lo $elf" ;;
+ bfd_elf32_mcore_little_vec) tb="$tb elf32-mcore.lo elf32.lo $elf" ;;
bfd_elf32_mn10200_vec) tb="$tb elf-m10200.lo elf32.lo $elf" ;;
bfd_elf32_mn10300_vec) tb="$tb elf-m10300.lo elf32.lo $elf" ;;
+ bfd_elf32_pj_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
+ bfd_elf32_pjl_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_sh_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
target64=true ;;
bfd_elf64_sparc_vec) tb="$tb elf64-sparc.lo elf64.lo $elf"
target64=true ;;
- cisco_core_vec) tb="$tb cisco-core.lo" ;;
+ cisco_core_big_vec) tb="$tb cisco-core.lo" ;;
+ cisco_core_little_vec) tb="$tb cisco-core.lo" ;;
demo_64_vec) tb="$tb demo64.lo aout64.lo"
target64=true ;;
ecoff_big_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
target64=true ;;
go32coff_vec) tb="$tb coff-go32.lo cofflink.lo" ;;
go32stubbedcoff_vec) tb="$tb coff-stgo32.lo cofflink.lo" ;;
- evax_alpha_vec) tb="$tb evax-alpha.lo evax-emh.lo evax-egsd.lo evax-etir.lo evax-misc.lo"
- target64=true ;;
h8300coff_vec) tb="$tb coff-h8300.lo reloc16.lo" ;;
h8500coff_vec) tb="$tb coff-h8500.lo reloc16.lo" ;;
host_aout_vec) tb="$tb host-aout.lo aout32.lo" ;;
i386dynix_vec) tb="$tb i386dynix.lo aout32.lo" ;;
i386freebsd_vec) tb="$tb i386freebsd.lo aout32.lo" ;;
i386msdos_vec) tb="$tb i386msdos.lo" ;;
- i386pe_vec) tb="$tb pe-i386.lo cofflink.lo " ;;
- i386pei_vec) tb="$tb pei-i386.lo cofflink.lo" ;;
+ i386pe_vec) tb="$tb pe-i386.lo peigen.lo cofflink.lo" ;;
+ i386pei_vec) tb="$tb pei-i386.lo peigen.lo cofflink.lo" ;;
i386linux_vec) tb="$tb i386linux.lo aout32.lo" ;;
i386lynx_aout_vec) tb="$tb i386lynx.lo lynx-core.lo aout32.lo" ;;
i386lynx_coff_vec) tb="$tb cf-i386lynx.lo cofflink.lo lynx-core.lo" ;;
m68kaux_coff_vec) tb="$tb coff-aux.lo coff-m68k.lo cofflink.lo" ;;
m68ksysvcoff_vec) tb="$tb coff-svm68k.lo cofflink.lo" ;;
m88kbcs_vec) tb="$tb coff-m88k.lo" ;;
+ mipslpe_vec) tb="$tb pe-mips.lo cofflink.lo" ;;
+ mipslpei_vec) tb="$tb pei-mips.lo cofflink.lo" ;;
+ mcore_pe_big_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pe_little_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pei_big_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pei_little_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
newsos3_vec) tb="$tb newsos3.lo aout32.lo" ;;
nlm32_i386_vec) tb="$tb nlm32-i386.lo nlm32.lo nlm.lo" ;;
nlm32_sparc_vec) tb="$tb nlm32-sparc.lo nlm32.lo nlm.lo" ;;
pc532machaout_vec) tb="$tb pc532-mach.lo aout-ns32k.lo" ;;
pmac_xcoff_vec) tb="$tb coff-pmac.lo xcofflink.lo" ;;
rs6000coff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
- bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
- bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
- bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
- bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
+ bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
ppcboot_vec) tb="$tb ppcboot.lo" ;;
shcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shlpe_vec) tb="$tb pe-sh.lo coff-sh.lo cofflink.lo" ;;
+ shlpei_vec) tb="$tb pei-sh.lo coff-sh.lo cofflink.lo" ;;
som_vec) tb="$tb som.lo" ;;
sparcle_aout_vec) tb="$tb aout-sparcle.lo aout32.lo" ;;
sparclinux_vec) tb="$tb sparclinux.lo aout32.lo" ;;
tekhex_vec) tb="$tb tekhex.lo" ;;
tic30_aout_vec) tb="$tb aout-tic30.lo" ;;
tic30_coff_vec) tb="$tb coff-tic30.lo" ;;
-# start-sanitize-tic80
tic80coff_vec) tb="$tb coff-tic80.lo cofflink.lo" ;;
-# end-sanitize-tic80
+ versados_vec) tb="$tb versados.lo" ;;
+ vms_alpha_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo"
+ target64=true ;;
+ vms_vax_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo" ;;
+ w65_vec) tb="$tb coff-w65.lo reloc16.lo" ;;
we32kcoff_vec) tb="$tb coff-we32k.lo" ;;
z8kcoff_vec) tb="$tb coff-z8k.lo reloc16.lo" ;;
- w65_vec) tb="$tb coff-w65.lo reloc16.lo" ;;
- versados_vec) tb="$tb versados.lo" ;;
"") ;;
*) { echo "configure: error: *** unknown target vector $vec" 1>&2; exit 1; } ;;
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4685: checking for $ac_hdr" >&5
+echo "configure:5297: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4690 "configure"
+#line 5302 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:5307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4724: checking for $ac_func" >&5
+echo "configure:5336: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4729 "configure"
+#line 5341 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:4777: checking for working mmap" >&5
+echo "configure:5389: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 4785 "configure"
+#line 5397 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:4925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4950: checking for $ac_func" >&5
+echo "configure:5562: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4955 "configure"
+#line 5567 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4978: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:5590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@SET_MAKE@%$SET_MAKE%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
s%@LIBTOOL@%$LIBTOOL%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
s%@EXEEXT@%$EXEEXT%g
s%@CPP@%$CPP%g