--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
ac_n= ac_c='\c' ac_t=
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:565: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 570 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:581: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:598: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 603 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:610: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
ac_aux_dir=
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:611: checking host system type" >&5
+echo "configure:675: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:632: checking target system type" >&5
+echo "configure:696: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:650: checking build system type" >&5
+echo "configure:714: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:675: checking for $ac_word" >&5
+echo "configure:739: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:705: checking for $ac_word" >&5
+echo "configure:769: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:756: checking for $ac_word" >&5
+echo "configure:820: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:788: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:852: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 799 "configure"
+#line 863 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:830: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:894: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:835: checking whether we are using GNU C" >&5
+echo "configure:899: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:844: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:863: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:927: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:895: checking for POSIXized ISC" >&5
+echo "configure:959: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:928: checking for a BSD compatible install" >&5
+echo "configure:992: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:981: checking whether build environment is sane" >&5
+echo "configure:1045: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1038: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1102: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
PACKAGE=bfd
-VERSION=2.10.90
+VERSION=2.12.90
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1084: checking for working aclocal" >&5
+echo "configure:1148: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1097: checking for working autoconf" >&5
+echo "configure:1161: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1110: checking for working automake" >&5
+echo "configure:1174: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1123: checking for working autoheader" >&5
+echo "configure:1187: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1136: checking for working makeinfo" >&5
+echo "configure:1200: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
+# Uncomment the next line to remove the date from the reported bfd version
+#is_release=y
+
+bfd_version=`echo "${VERSION}" | sed -e 's/\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\)\.*\([^\.]*\).*/\1.00\2.00\3.00\4.00\5/' -e 's/\([^\.]*\)\..*\(..\)\..*\(..\)\..*\(..\)\..*\(..\)$/\1\2\3\4\5/'`
+
+bfd_version_string="\"${VERSION}\""
+bfd_version_date=`sed -e 's/.*DATE //' < ${srcdir}/version.h`
+if test x${is_release} = x; then
+ bfd_version_string="\"${VERSION} ${bfd_version_date}\""
+fi
+
+
+
if test $host != $build; then
ac_tool_prefix=${host_alias}-
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1159: checking for $ac_word" >&5
+echo "configure:1236: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1191: checking for $ac_word" >&5
+echo "configure:1268: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1223: checking for $ac_word" >&5
+echo "configure:1300: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=yes
fi
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1329: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
fi
ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
+if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1368: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
+echo "configure:1415: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1392: checking for GNU ld" >&5
+echo "configure:1445: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1395: checking for non-GNU ld" >&5
+echo "configure:1448: checking for non-GNU ld" >&5
fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
done
IFS="$ac_save_ifs"
else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
-LD="$ac_cv_path_LD"
+LD="$lt_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1430: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+echo "configure:1483: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
+ lt_cv_prog_gnu_ld=yes
else
- ac_cv_prog_gnu_ld=no
+ lt_cv_prog_gnu_ld=no
fi
fi
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1500: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1446: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+echo "configure:1512: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
- ac_cv_path_NM="$NM"
+ lt_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
break
else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
-NM="$ac_cv_path_NM"
+NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1482: checking whether ln -s works" >&5
+echo "configure:1550: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1571: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- :
-fi
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line 1531 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1532: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
+ else
+ lt_cv_deplibs_check_method=pass_all
fi
- rm -rf conftest*
;;
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1553: checking whether the C compiler needs -belf" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1558 "configure"
-#include "confdefs.h"
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-int main() {
+hpux10.20*|hpux11*)
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
+ ;;
-; return 0; }
-EOF
-if { (eval echo configure:1565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- lt_cv_cc_needs_belf=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- lt_cv_cc_needs_belf=no
-fi
-rm -f conftest*
-fi
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
fi
;;
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
-esac
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-# Save cache, so that ltconfig can load it
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
+ esac
+ ;;
+esac
+fi
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1744: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "creating cache $cache_file"
- > $cache_file
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
fi
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-# Always use our own libtool.
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1770: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1807: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1869: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1940: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1972: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2007: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2039: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ STRIP=":"
+fi
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 2106 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2107: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2126: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:2144: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2157 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:2164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
+fi
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+fi
+
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
+
+
+
+
+
# Check whether --enable-64-bit-bfd or --disable-64-bit-bfd was given.
if test "${enable_64_bit_bfd+set}" = set; then
want_mmap=false
fi
-build_warnings="-W -Wall"
+build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes"
# Check whether --enable-build-warnings or --disable-build-warnings was given.
if test "${enable_build_warnings+set}" = set; then
enableval="$enable_build_warnings"
if test -z "$target" ; then
{ echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
fi
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
-else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1760: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2354: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
MAINT=$MAINTAINER_MODE_TRUE
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1783: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1788 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:1799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_cygwin=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1816: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1821 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:1828: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_mingw32=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1847: checking for executable suffix" >&5
+echo "configure:2379: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1857: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
host64=false
target64=false
+bfd_default_target_size=32
# host stuff:
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1886: checking for $ac_word" >&5
+echo "configure:2419: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1916: checking for $ac_word" >&5
+echo "configure:2449: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1967: checking for $ac_word" >&5
+echo "configure:2500: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1999: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2532: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2010 "configure"
+#line 2543 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2041: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2574: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2046: checking whether we are using GNU C" >&5
+echo "configure:2579: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2588: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2074: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2607: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-ALL_LINGUAS=
+ALL_LINGUAS="fr tr ja es sv"
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2108: checking how to run the C preprocessor" >&5
+echo "configure:2641: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2123 "configure"
+#line 2656 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2662: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2140 "configure"
+#line 2673 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2679: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2157 "configure"
+#line 2690 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
fi
echo "$ac_t""$CPP" 1>&6
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2723: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2188: checking for ANSI C header files" >&5
+echo "configure:2751: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2193 "configure"
+#line 2756 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2201: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2764: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2218 "configure"
+#line 2781 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2236 "configure"
+#line 2799 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2257 "configure"
+#line 2820 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2292: checking for working const" >&5
+echo "configure:2855: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2297 "configure"
+#line 2860 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2346: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2367: checking for inline" >&5
+echo "configure:2930: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2374 "configure"
+#line 2937 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2381: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2944: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2407: checking for off_t" >&5
+echo "configure:2970: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2412 "configure"
+#line 2975 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2440: checking for size_t" >&5
+echo "configure:3003: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2445 "configure"
+#line 3008 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2475: checking for working alloca.h" >&5
+echo "configure:3038: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2480 "configure"
+#line 3043 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2508: checking for alloca" >&5
+echo "configure:3071: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2513 "configure"
+#line 3076 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2573: checking whether alloca needs Cray hooks" >&5
+echo "configure:3136: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2578 "configure"
+#line 3141 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2603: checking for $ac_func" >&5
+echo "configure:3166: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2608 "configure"
+#line 3171 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2658: checking stack direction for C alloca" >&5
+echo "configure:3221: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2666 "configure"
+#line 3229 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2710: checking for $ac_hdr" >&5
+echo "configure:3273: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2715 "configure"
+#line 3278 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2720: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3283: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2749: checking for $ac_func" >&5
+echo "configure:3312: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2754 "configure"
+#line 3317 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2802: checking for working mmap" >&5
+echo "configure:3365: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2810 "configure"
+#line 3373 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2978: checking for $ac_hdr" >&5
+echo "configure:3541: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2983 "configure"
+#line 3546 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3551: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3018: checking for $ac_func" >&5
+echo "configure:3581: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3023 "configure"
+#line 3586 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3046: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3075: checking for $ac_func" >&5
+echo "configure:3638: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3080 "configure"
+#line 3643 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3137: checking for LC_MESSAGES" >&5
+echo "configure:3700: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3142 "configure"
+#line 3705 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3170: checking whether NLS is requested" >&5
+echo "configure:3733: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3190: checking whether included gettext is requested" >&5
+echo "configure:3753: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3209: checking for libintl.h" >&5
+echo "configure:3772: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3214 "configure"
+#line 3777 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3219: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3782: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3236: checking for gettext in libc" >&5
+echo "configure:3799: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3241 "configure"
+#line 3804 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3811: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3264: checking for bindtextdomain in -lintl" >&5
+echo "configure:3827: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3272 "configure"
+#line 3835 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3283: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3299: checking for gettext in libintl" >&5
+echo "configure:3862: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3304 "configure"
+#line 3867 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3339: checking for $ac_word" >&5
+echo "configure:3902: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3373: checking for $ac_func" >&5
+echo "configure:3936: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3378 "configure"
+#line 3941 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3401: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3428: checking for $ac_word" >&5
+echo "configure:3991: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3464: checking for $ac_word" >&5
+echo "configure:4027: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3496 "configure"
+#line 4059 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3536: checking for $ac_word" >&5
+echo "configure:4099: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3570: checking for $ac_word" >&5
+echo "configure:4133: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3606: checking for $ac_word" >&5
+echo "configure:4169: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3696: checking for catalogs to be installed" >&5
+echo "configure:4259: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3724: checking for linux/version.h" >&5
+echo "configure:4287: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3729 "configure"
+#line 4292 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3734: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4297: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
l=
- if test -d $srcdir/po; then
+ if test -f $srcdir/po/POTFILES.in; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:3812: checking for a BSD compatible install" >&5
+echo "configure:4375: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
EXEEXT_FOR_BUILD='$(EXEEXT)'
else
echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:3895: checking for build system executable suffix" >&5
+echo "configure:4458: checking for build system executable suffix" >&5
if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3923: checking for $ac_hdr" >&5
+echo "configure:4486: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3928 "configure"
+#line 4491 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4496: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3963: checking for $ac_hdr" >&5
+echo "configure:4526: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3968 "configure"
+#line 4531 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4536: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4000: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:4563: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4005 "configure"
+#line 4568 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:4014: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4577: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4039: checking for $ac_hdr that defines DIR" >&5
+echo "configure:4602: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4044 "configure"
+#line 4607 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4052: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4615: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4077: checking for opendir in -ldir" >&5
+echo "configure:4640: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4085 "configure"
+#line 4648 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4118: checking for opendir in -lx" >&5
+echo "configure:4681: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4126 "configure"
+#line 4689 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4137: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in fcntl getpagesize setitimer sysconf fdopen getuid getgid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4162: checking for $ac_func" >&5
+echo "configure:4725: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4167 "configure"
+#line 4730 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4225: checking whether strstr must be declared" >&5
+echo "configure:4788: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4230 "configure"
+#line 4793 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4251: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:4272: checking whether malloc must be declared" >&5
+echo "configure:4835: checking whether malloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4277 "configure"
+#line 4840 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:4298: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4861: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:4319: checking whether realloc must be declared" >&5
+echo "configure:4882: checking whether realloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4324 "configure"
+#line 4887 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:4345: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4366: checking whether free must be declared" >&5
+echo "configure:4929: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4371 "configure"
+#line 4934 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4392: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4955: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4413: checking whether getenv must be declared" >&5
+echo "configure:4976: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4418 "configure"
+#line 4981 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4439: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5002: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
TRAD_HEADER=
if test "${target}" = "${host}"; then
case "${host}" in
+ alpha*-*-freebsd*)
+ COREFILE=''
+ ;;
alpha*-*-linux-gnu*)
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/alphalinux.h"'
;;
alpha*-*-netbsd*) COREFILE=netbsd-core.lo ;;
alpha*-*-*) COREFILE=osf-core.lo ;;
+ arm-*-freebsd*) COREFILE='' ;;
+ arm-*-netbsd*) COREFILE=netbsd-core.lo ;;
arm-*-riscix) COREFILE=trad-core.lo ;;
hppa*-*-hpux*) COREFILE=hpux-core.lo ;;
hppa*-*-hiux*) COREFILE=hpux-core.lo ;;
hppa*-*-mpeix*) COREFILE=hpux-core.lo ;;
hppa*-*-bsd*) COREFILE="hpux-core.lo hppabsd-core.lo"
COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
- i370-*-*)
+ i370-*-*)
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/i370linux.h"'
;;
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/symmetry.h"'
;;
- i[3456]86-*-bsd* | i[3456]86-*-freebsd*)
+ i[3456]86-*-bsdi)
+ COREFILE=
+ ;;
+ i[3456]86-*-bsd* | i[34567]86-*-freebsd[123] | i[34567]86-*-freebsd[123]\.* | i[34567]86-*-freebsd4\.[01234]* | i[34567]86-*-freebsd*aout*)
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/i386bsd.h"'
;;
+ i[3456]86-*-freebsd*)
+ COREFILE=''
+ TRAD_HEADER='"hosts/i386bsd.h"'
+ ;;
i[3456]86-*-netbsd* | i[3456]86-*-openbsd*)
COREFILE=netbsd-core.lo
;;
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/m68kaux.h"'
;;
- m88*-*-sysv4*) ;;
- m88*-motorola-sysv*) COREFILE=ptrace-core.lo ;;
+ m88*-*-sysv4*)
+ ;;
+ m88*-motorola-sysv*)
+ COREFILE=ptrace-core.lo
+ ;;
m88*-*-mach3*)
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/m88kmach3.h"'
ns32k-*-netbsd* | ns32k-*-openbsd*)
COREFILE=netbsd-core.lo
;;
- rs6000-*-lynx*) COREFILE=lynx-core.lo ;;
- rs6000-*-aix4.[3-9]* | powerpc-*-aix4.[3-9]*)
+ rs6000-*-lynx*)
+ COREFILE=lynx-core.lo
+ ;;
+ rs6000-*-aix5.* | powerpc-*-aix5.*)
+ COREFILE=rs6000-core.lo
+ COREFLAG="$COREFLAG -DAIX_5_CORE -DAIX_CORE_DUMPX_CORE"
+ ;;
+ rs6000-*-aix4.[4-9]* | powerpc-*-aix4.[4-9]* | \
+ rs6000-*-aix4.3.[3-9]* | powerpc-*-aix4.3.[3-9]*)
COREFILE=rs6000-core.lo
COREFLAG="$COREFLAG -DAIX_CORE_DUMPX_CORE"
;;
rs6000-*-aix4*) COREFILE=rs6000-core.lo ;;
rs6000-*-*) COREFILE=rs6000-core.lo ;;
- powerpc-*-*bsd*) COREFILE=netbsd-core.lo ;;
powerpc-*-aix4*) COREFILE=rs6000-core.lo ;;
powerpc-*-aix*) COREFILE=rs6000-core.lo ;;
powerpc-*-beos*) ;;
+ powerpc-*-freebsd*) COREFILE='' ;;
powerpc-*-netbsd*) COREFILE=netbsd-core.lo ;;
+ powerpc-*-*bsd*) COREFILE=netbsd-core.lo ;;
+ s390*-*-*) COREFILE=trad-core.lo ;;
+ sh*-*-netbsd*) COREFILE=netbsd-core.lo ;;
sparc-*-netbsd* | sparc-*-openbsd*)
COREFILE=netbsd-core.lo
;;
COREFILE=trad-core.lo
TRAD_HEADER='"hosts/vaxbsd.h"'
;;
+ x86_64-*-netbsd*) COREFILE=netbsd-core.lo ;;
esac
case "$COREFILE" in
trad-core.lo) COREFLAG="$COREFLAG -DTRAD_CORE" ;;
esac
- # ELF corefile support has several flavors, but all of
- # them use something called <sys/procfs.h>
- for ac_hdr in sys/procfs.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4649: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ # ELF corefile support has several flavors, but all of
+ # them use something called <sys/procfs.h>
+ for ac_hdr in sys/procfs.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:5238: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5243 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:5248: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ if test "$ac_cv_header_sys_procfs_h" = yes; then
+ echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5276: checking for prstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5281 "configure"
+#include "confdefs.h"
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:5290: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prstatus_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_prstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
+
+ echo $ac_n "checking for prstatus32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5312: checking for prstatus32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus32_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5317 "configure"
+#include "confdefs.h"
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prstatus32_t avar
+; return 0; }
+EOF
+if { (eval echo configure:5326: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prstatus32_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prstatus32_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_prstatus32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS32_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus32_t" 1>&6
+
+ echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5348: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5353 "configure"
+#include "confdefs.h"
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prstatus_t avar; void* aref = (void*) &avar.pr_who
+; return 0; }
+EOF
+if { (eval echo configure:5362: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS_T_PR_WHO 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
+
+ echo $ac_n "checking for prstatus32_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5384: checking for prstatus32_t.pr_who in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4654 "configure"
+#line 5389 "configure"
#include "confdefs.h"
-#include <$ac_hdr>
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prstatus32_t avar; void* aref = (void*) &avar.pr_who
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4659: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:5398: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who=yes
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who=no
+
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
+
+ if test $bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRSTATUS32_T_PR_WHO 1
EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
- if test "$ac_cv_header_sys_procfs_h" = yes; then
- echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4687: checking for prstatus_t in sys/procfs.h" >&5
- if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus32_t_pr_who" 1>&6
+
+ echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5420: checking for pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4692 "configure"
+#line 5425 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
-prstatus_t avar
+pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4699: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5434: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_have_sys_procfs_type_prstatus_t=yes
+ bfd_cv_have_sys_procfs_type_pstatus_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_have_sys_procfs_type_prstatus_t=no
+ bfd_cv_have_sys_procfs_type_pstatus_t=no
fi
rm -f conftest*
fi
- if test $bfd_cv_have_sys_procfs_type_prstatus_t = yes; then
+ if test $bfd_cv_have_sys_procfs_type_pstatus_t = yes; then
cat >> confdefs.h <<\EOF
-#define HAVE_PRSTATUS_T 1
+#define HAVE_PSTATUS_T 1
EOF
fi
- echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
- echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4721: checking for prstatus_t.pr_who in sys/procfs.h" >&5
- if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
+ echo $ac_n "checking for pxstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5456: checking for pxstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pxstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4726 "configure"
+#line 5461 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
-prstatus_t avar; void* aref = (void*) &avar.pr_who
+pxstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4733: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5470: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
+ bfd_cv_have_sys_procfs_type_pxstatus_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=no
+ bfd_cv_have_sys_procfs_type_pxstatus_t=no
fi
rm -f conftest*
fi
- if test $bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who = yes; then
+ if test $bfd_cv_have_sys_procfs_type_pxstatus_t = yes; then
cat >> confdefs.h <<\EOF
-#define HAVE_PRSTATUS_T_PR_WHO 1
+#define HAVE_PXSTATUS_T 1
EOF
fi
- echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pxstatus_t" 1>&6
- echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4755: checking for pstatus_t in sys/procfs.h" >&5
- if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
+ echo $ac_n "checking for pstatus32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5492: checking for pstatus32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus32_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4760 "configure"
+#line 5497 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
-pstatus_t avar
+pstatus32_t avar
; return 0; }
EOF
-if { (eval echo configure:4767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5506: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- bfd_cv_have_sys_procfs_type_pstatus_t=yes
+ bfd_cv_have_sys_procfs_type_pstatus32_t=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- bfd_cv_have_sys_procfs_type_pstatus_t=no
+ bfd_cv_have_sys_procfs_type_pstatus32_t=no
fi
rm -f conftest*
fi
- if test $bfd_cv_have_sys_procfs_type_pstatus_t = yes; then
+ if test $bfd_cv_have_sys_procfs_type_pstatus32_t = yes; then
cat >> confdefs.h <<\EOF
-#define HAVE_PSTATUS_T 1
+#define HAVE_PSTATUS32_T 1
EOF
fi
- echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus32_t" 1>&6
echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4789: checking for prpsinfo_t in sys/procfs.h" >&5
+echo "configure:5528: checking for prpsinfo_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4794 "configure"
+#line 5533 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
prpsinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:4801: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5542: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
else
fi
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
+ echo $ac_n "checking for prpsinfo32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5564: checking for prpsinfo32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo32_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5569 "configure"
+#include "confdefs.h"
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+prpsinfo32_t avar
+; return 0; }
+EOF
+if { (eval echo configure:5578: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prpsinfo32_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_prpsinfo32_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_prpsinfo32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PRPSINFO32_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo32_t" 1>&6
+
echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4823: checking for psinfo_t in sys/procfs.h" >&5
+echo "configure:5600: checking for psinfo_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4828 "configure"
+#line 5605 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
psinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:4835: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5614: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_psinfo_t=yes
else
fi
echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
+ echo $ac_n "checking for psinfo32_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5636: checking for psinfo32_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo32_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5641 "configure"
+#include "confdefs.h"
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+psinfo32_t avar
+; return 0; }
+EOF
+if { (eval echo configure:5650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo32_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_psinfo32_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_psinfo32_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_PSINFO32_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo32_t" 1>&6
+
echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4857: checking for lwpstatus_t in sys/procfs.h" >&5
+echo "configure:5672: checking for lwpstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4862 "configure"
+#line 5677 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
lwpstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4869: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5686: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
else
fi
echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
+ echo $ac_n "checking for lwpxstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:5708: checking for lwpxstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpxstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5713 "configure"
+#include "confdefs.h"
+
+#define _SYSCALL32
+#include <sys/procfs.h>
+int main() {
+lwpxstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:5722: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpxstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_lwpxstatus_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_lwpxstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LWPXSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpxstatus_t" 1>&6
+
echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4891: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+echo "configure:5744: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4896 "configure"
+#line 5749 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_context
; return 0; }
EOF
-if { (eval echo configure:4903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5758: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4925: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+echo "configure:5780: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4930 "configure"
+#line 5785 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
; return 0; }
EOF
-if { (eval echo configure:4937: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5794: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg" 1>&6
echo $ac_n "checking for win32_pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4959: checking for win32_pstatus_t in sys/procfs.h" >&5
+echo "configure:5816: checking for win32_pstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_win32_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4964 "configure"
+#line 5821 "configure"
#include "confdefs.h"
+
+#define _SYSCALL32
#include <sys/procfs.h>
int main() {
win32_pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:4971: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_win32_pstatus_t=yes
else
WIN32LIBADD="-L`pwd`/../libiberty -liberty -L`pwd`/../intl -lintl -lcygwin -lkernel32"
fi
;;
+*-*-linux*)
+ # We borrow WIN32LIBADD so that the shared libbfd won't depend on
+ # libiberty.a.
+ case "${host}" in
+ mips*-*-linux*)
+ # Linux/MIPS uses PIC by default.
+ if test "$enable_shared" = "yes"; then
+ WIN32LIBADD="-L../libiberty -liberty"
+ fi
+ ;;
+ *)
+ x=`sed -n -e 's/^[ ]*PICFLAG[ ]*=[ ]*//p' < ../libiberty/Makefile | tail -1`
+ if test -n "$x"; then
+ WIN32LIBADD="-L../libiberty/pic -liberty"
+ fi
+ ;;
+ esac
+ ;;
esac
# Target backend .o files.
tb=
-elf="elf.lo elflink.lo dwarf2.lo dwarf1.lo"
+elf="elf.lo elflink.lo elf-strtab.lo elf-eh-frame.lo dwarf1.lo"
for vec in $selvecs
do
+ target_size=32
case "$vec" in
# This list is alphabetized to make it easy to compare
- # with the two vector lists in targets.c.
+ # with the two vector lists in targets.c. For the same reason,
+ # use one entry per line, even though this leads to long lines.
a29kcoff_big_vec) tb="$tb coff-a29k.lo cofflink.lo" ;;
a_out_adobe_vec) tb="$tb aout-adobe.lo aout32.lo" ;;
- armcoff_little_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
- armcoff_big_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
- armnetbsd_vec) tb="$tb armnetbsd.lo aout32.lo" ;;
- armpe_little_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
- armpe_big_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
- armpei_little_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
- armpei_big_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
- arm_epoc_pe_little_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
- arm_epoc_pe_big_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
- arm_epoc_pei_little_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
- arm_epoc_pei_big_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
aout0_big_vec) tb="$tb aout0.lo aout32.lo" ;;
aout_arm_big_vec) tb="$tb aout-arm.lo aout32.lo" ;;
aout_arm_little_vec) tb="$tb aout-arm.lo aout32.lo" ;;
aout_mips_big_vec) tb="$tb mipsbsd.lo aout32.lo" ;;
aout_mips_little_vec) tb="$tb mipsbsd.lo aout32.lo" ;;
apollocoff_vec) tb="$tb coff-apollo.lo" ;;
+ arm_epoc_pe_big_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_little_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_big_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_little_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
+ armcoff_big_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
+ armcoff_little_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
+ armnetbsd_vec) tb="$tb armnetbsd.lo aout32.lo" ;;
+ armpe_big_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpe_little_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_big_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_little_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
b_out_vec_big_host) tb="$tb bout.lo aout32.lo" ;;
b_out_vec_little_host) tb="$tb bout.lo aout32.lo" ;;
bfd_efi_app_ia32_vec) tb="$tb efi-app-ia32.lo peigen.lo cofflink.lo" ;;
- bfd_efi_app_ia64_vec) tb="$tb efi-app-ia64.lo peigen.lo cofflink.lo"
- target64=true ;;
- bfd_elf64_alpha_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"
- target64=true ;;
- bfd_elf64_hppa_vec) tb="$tb elf64-hppa.lo elf64.lo $elf"
- target64=true ;;
- bfd_elf64_ia64_little_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"
- target64=true ;;
- bfd_elf64_ia64_big_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"
- target64=true ;;
+ bfd_efi_app_ia64_vec) tb="$tb efi-app-ia64.lo pepigen.lo cofflink.lo"; target_size=64 ;;
bfd_elf32_avr_vec) tb="$tb elf32-avr.lo elf32.lo $elf" ;;
- bfd_elf32_littlearc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
- bfd_elf32_littlearm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
- bfd_elf32_littlearm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
+ bfd_elf32_big_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
bfd_elf32_bigarc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
- bfd_elf32_bigarm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
bfd_elf32_bigarm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
- bfd_elf32_big_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
- bfd_elf32_bigmips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
- bfd_elf64_bigmips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
- target64=true ;;
+ bfd_elf32_bigarm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
+ bfd_elf32_bigmips_vec) tb="$tb elf32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf32_cris_vec) tb="$tb elf32-cris.lo elf32.lo $elf" ;;
bfd_elf32_d10v_vec) tb="$tb elf32-d10v.lo elf32.lo $elf" ;;
bfd_elf32_d30v_vec) tb="$tb elf32-d30v.lo elf32.lo $elf" ;;
bfd_elf32_fr30_vec) tb="$tb elf32-fr30.lo elf32.lo $elf" ;;
+ bfd_elf32_h8300_vec) tb="$tb elf32-h8300.lo elf32.lo $elf" ;;
+ bfd_elf32_hppa_linux_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
bfd_elf32_hppa_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
bfd_elf32_i370_vec) tb="$tb elf32-i370.lo elf32.lo $elf" ;;
bfd_elf32_i386_vec) tb="$tb elf32-i386.lo elf32.lo $elf" ;;
+ bfd_elf32_i860_little_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
bfd_elf32_i860_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
bfd_elf32_i960_vec) tb="$tb elf32-i960.lo elf32.lo $elf" ;;
+ bfd_elf32_ia64_big_vec) tb="$tb elf32-ia64.lo elf32.lo $elf" ;;
+ bfd_elf32_ia64_hpux_big_vec) tb="$tb elf32-ia64.lo elf32.lo $elf";;
bfd_elf32_little_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
- bfd_elf32_littlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
- bfd_elf64_littlemips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
- target64=true ;;
+ bfd_elf32_littlearc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
+ bfd_elf32_littlearm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
+ bfd_elf32_littlearm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
+ bfd_elf32_littlemips_vec) tb="$tb elf32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo" ;;
bfd_elf32_m32r_vec) tb="$tb elf32-m32r.lo elf32.lo $elf" ;;
bfd_elf32_m68hc11_vec) tb="$tb elf32-m68hc11.lo elf32.lo $elf" ;;
bfd_elf32_m68hc12_vec) tb="$tb elf32-m68hc12.lo elf32.lo $elf" ;;
bfd_elf32_mcore_little_vec) tb="$tb elf32-mcore.lo elf32.lo $elf" ;;
bfd_elf32_mn10200_vec) tb="$tb elf-m10200.lo elf32.lo $elf" ;;
bfd_elf32_mn10300_vec) tb="$tb elf-m10300.lo elf32.lo $elf" ;;
+ bfd_elf32_openrisc_vec) tb="$tb elf32-openrisc.lo elf32.lo $elf" ;;
+ bfd_elf32_or32_big_vec) tb="$tb elf32-or32.lo elf32.lo $elf" ;;
bfd_elf32_pj_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_pjl_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
+ bfd_elf32_s390_vec) tb="$tb elf32-s390.lo elf32.lo $elf" ;;
bfd_elf32_sh_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
+ bfd_elf32_shblin_vec) tb="$tb elf32-sh-lin.lo elf32.lo $elf coff-sh.lo cofflink.lo" ;;
bfd_elf32_shl_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
+ bfd_elf32_shlin_vec) tb="$tb elf32-sh-lin.lo elf32.lo $elf coff-sh.lo cofflink.lo" ;;
+ bfd_elf32_shlnbsd_vec) tb="$tb elf32-sh-nbsd.lo elf32.lo $elf coff-sh.lo cofflink.lo" ;;
+ bfd_elf32_shnbsd_vec) tb="$tb elf32-sh-nbsd.lo elf32.lo $elf coff-sh.lo cofflink.lo" ;;
+ # FIXME: We include cofflink.lo not because it's needed for
+ # bfd_elf32_sh64[l]_vec, but because we include bfd_elf32_sh[l]_vec
+ # which needs it but does not list it. Should be fixed in right place.
+ bfd_elf32_sh64_vec) tb="$tb elf32-sh64.lo elf32.lo $elf cofflink.lo" target_size=64 ;;
+ bfd_elf32_sh64l_vec) tb="$tb elf32-sh64.lo elf32.lo $elf cofflink.lo" target_size=64 ;;
+ bfd_elf64_sh64_vec) tb="$tb elf64-sh64.lo elf64.lo $elf" target_size=64 ;;
+ bfd_elf64_sh64l_vec) tb="$tb elf64-sh64.lo elf64.lo $elf" target_size=64 ;;
bfd_elf32_sparc_vec) tb="$tb elf32-sparc.lo elf32.lo $elf" ;;
- bfd_elf32_tradbigmips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
- bfd_elf32_tradlittlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf32_tradbigmips_vec) tb="$tb elf32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf32_tradlittlemips_vec) tb="$tb elf32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf32_us_cris_vec) tb="$tb elf32-cris.lo elf32.lo $elf" ;;
bfd_elf32_v850_vec) tb="$tb elf32-v850.lo elf32.lo $elf" ;;
- bfd_elf64_big_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"
- target64=true ;;
- bfd_elf64_little_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"
- target64=true ;;
- bfd_elf64_sparc_vec) tb="$tb elf64-sparc.lo elf64.lo $elf"
- target64=true ;;
+ bfd_elf32_xstormy16_vec) tb="$tb elf32-xstormy16.lo elf32.lo $elf" ;;
+ bfd_elf64_alpha_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_big_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_bigmips_vec) tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
+ bfd_elf64_hppa_linux_vec) tb="$tb elf64-hppa.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_hppa_vec) tb="$tb elf64-hppa.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_ia64_aix_big_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_ia64_aix_little_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_ia64_big_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_ia64_hpux_big_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_ia64_little_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_little_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_littlemips_vec) tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
+ bfd_elf64_mmix_vec) tb="$tb elf64-mmix.lo elf64.lo $elf" target_size=64 ;;
+ bfd_elf64_powerpc_vec) tb="$tb elf64-ppc.lo elf64-gen.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_powerpcle_vec) tb="$tb elf64-ppc.lo elf64-gen.lo elf64.lo $elf" target_size=64 ;;
+ bfd_elf64_s390_vec) tb="$tb elf64-s390.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_sparc_vec) tb="$tb elf64-sparc.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_elf64_tradbigmips_vec) tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
+ bfd_elf64_tradlittlemips_vec) tb="$tb elf64-mips.lo elf64.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
+ bfd_elf64_x86_64_vec) tb="$tb elf64-x86-64.lo elf64.lo $elf"; target_size=64 ;;
+ bfd_mmo_vec) tb="$tb mmo.lo" target_size=64 ;;
+ bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
cisco_core_big_vec) tb="$tb cisco-core.lo" ;;
cisco_core_little_vec) tb="$tb cisco-core.lo" ;;
- demo_64_vec) tb="$tb demo64.lo aout64.lo"
- target64=true ;;
+ cris_aout_vec) tb="$tb aout-cris.lo" ;;
+ demo_64_vec) tb="$tb demo64.lo aout64.lo"; target_size=64 ;;
ecoff_big_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
- ecoff_little_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
ecoff_biglittle_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
- ecoffalpha_little_vec) tb="$tb coff-alpha.lo ecoff.lo ecofflink.lo"
- target64=true ;;
+ ecoff_little_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
+ ecoffalpha_little_vec) tb="$tb coff-alpha.lo ecoff.lo ecofflink.lo"; target_size=64 ;;
go32coff_vec) tb="$tb coff-go32.lo cofflink.lo" ;;
go32stubbedcoff_vec) tb="$tb coff-stgo32.lo cofflink.lo" ;;
h8300coff_vec) tb="$tb coff-h8300.lo reloc16.lo" ;;
i386coff_vec) tb="$tb coff-i386.lo cofflink.lo" ;;
i386dynix_vec) tb="$tb i386dynix.lo aout32.lo" ;;
i386freebsd_vec) tb="$tb i386freebsd.lo aout32.lo" ;;
- i386msdos_vec) tb="$tb i386msdos.lo" ;;
- i386pe_vec) tb="$tb pe-i386.lo peigen.lo cofflink.lo" ;;
- i386pei_vec) tb="$tb pei-i386.lo peigen.lo cofflink.lo" ;;
i386linux_vec) tb="$tb i386linux.lo aout32.lo" ;;
i386lynx_aout_vec) tb="$tb i386lynx.lo lynx-core.lo aout32.lo" ;;
i386lynx_coff_vec) tb="$tb cf-i386lynx.lo cofflink.lo lynx-core.lo" ;;
i386mach3_vec) tb="$tb i386mach3.lo aout32.lo" ;;
+ i386msdos_vec) tb="$tb i386msdos.lo" ;;
i386netbsd_vec) tb="$tb i386netbsd.lo aout32.lo" ;;
i386os9k_vec) tb="$tb i386os9k.lo aout32.lo" ;;
+ i386pe_vec) tb="$tb pe-i386.lo peigen.lo cofflink.lo" ;;
+ i386pei_vec) tb="$tb pei-i386.lo peigen.lo cofflink.lo" ;;
i860coff_vec) tb="$tb coff-i860.lo cofflink.lo" ;;
icoff_big_vec) tb="$tb coff-i960.lo cofflink.lo" ;;
icoff_little_vec) tb="$tb coff-i960.lo cofflink.lo" ;;
ieee_vec) tb="$tb ieee.lo" ;;
+ m68k4knetbsd_vec) tb="$tb m68k4knetbsd.lo aout32.lo" ;;
+ m68kaux_coff_vec) tb="$tb coff-aux.lo coff-m68k.lo cofflink.lo" ;;
m68kcoff_vec) tb="$tb coff-m68k.lo cofflink.lo" ;;
m68kcoffun_vec) tb="$tb coff-u68k.lo coff-m68k.lo cofflink.lo" ;;
m68klinux_vec) tb="$tb m68klinux.lo aout32.lo" ;;
m68klynx_aout_vec) tb="$tb m68klynx.lo lynx-core.lo aout32.lo" ;;
m68klynx_coff_vec) tb="$tb cf-m68klynx.lo coff-m68k.lo cofflink.lo lynx-core.lo" ;;
m68knetbsd_vec) tb="$tb m68knetbsd.lo aout32.lo" ;;
- m68k4knetbsd_vec) tb="$tb m68k4knetbsd.lo aout32.lo" ;;
- m68kaux_coff_vec) tb="$tb coff-aux.lo coff-m68k.lo cofflink.lo" ;;
m68ksysvcoff_vec) tb="$tb coff-svm68k.lo cofflink.lo" ;;
m88kbcs_vec) tb="$tb coff-m88k.lo" ;;
- mipslpe_vec) tb="$tb pe-mips.lo peigen.lo cofflink.lo" ;;
- mipslpei_vec) tb="$tb pei-mips.lo peigen.lo cofflink.lo" ;;
mcore_pe_big_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
mcore_pe_little_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
mcore_pei_big_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
mcore_pei_little_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
+ mipslpe_vec) tb="$tb pe-mips.lo peigen.lo cofflink.lo" ;;
+ mipslpei_vec) tb="$tb pei-mips.lo peigen.lo cofflink.lo" ;;
newsos3_vec) tb="$tb newsos3.lo aout32.lo" ;;
+ nlm32_alpha_vec) tb="$tb nlm32-alpha.lo nlm32.lo nlm.lo"; target_size=64 ;;
nlm32_i386_vec) tb="$tb nlm32-i386.lo nlm32.lo nlm.lo" ;;
- rs6000coff64_vec) tb="$tb coff64-rs6000.lo xcofflink.lo"
- target64=true ;;
- nlm32_sparc_vec) tb="$tb nlm32-sparc.lo nlm32.lo nlm.lo" ;;
- nlm32_alpha_vec) tb="$tb nlm32-alpha.lo nlm32.lo nlm.lo"
- target64=true ;;
- riscix_vec) tb="$tb aout32.lo riscix.lo" ;;
nlm32_powerpc_vec) tb="$tb nlm32-ppc.lo nlm32.lo nlm.lo" ;;
- pc532netbsd_vec) tb="$tb ns32knetbsd.lo aout-ns32k.lo" ;;
+ nlm32_sparc_vec) tb="$tb nlm32-sparc.lo nlm32.lo nlm.lo" ;;
+ or32coff_big_vec) tb="$tb coff-or32.lo cofflink.lo" ;;
pc532machaout_vec) tb="$tb pc532-mach.lo aout-ns32k.lo" ;;
- pmac_xcoff_vec) tb="$tb coff-pmac.lo xcofflink.lo" ;;
- rs6000coff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
- bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
- bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
- bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
- bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
+ pc532netbsd_vec) tb="$tb ns32knetbsd.lo aout-ns32k.lo" ;;
+ pdp11_aout_vec) tb="$tb pdp11.lo" ;;
+ pmac_xcoff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
ppcboot_vec) tb="$tb ppcboot.lo" ;;
- shcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
- shlcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ riscix_vec) tb="$tb aout32.lo riscix.lo" ;;
+ rs6000coff64_vec) tb="$tb coff64-rs6000.lo xcofflink.lo aix5ppc-core.lo"; target_size=64 ;;
+ aix5coff64_vec) tb="$tb coff64-rs6000.lo xcofflink.lo aix5ppc-core.lo"; target_size=64 ;;
+ rs6000coff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
shcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shlcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlpe_vec) tb="$tb pe-sh.lo coff-sh.lo peigen.lo cofflink.lo" ;;
shlpei_vec) tb="$tb pei-sh.lo coff-sh.lo peigen.lo cofflink.lo" ;;
som_vec) tb="$tb som.lo" ;;
+ sparccoff_vec) tb="$tb coff-sparc.lo" ;;
sparcle_aout_vec) tb="$tb aout-sparcle.lo aout32.lo" ;;
sparclinux_vec) tb="$tb sparclinux.lo aout32.lo" ;;
sparclynx_aout_vec) tb="$tb sparclynx.lo lynx-core.lo aout32.lo" ;;
sparclynx_coff_vec) tb="$tb cf-sparclynx.lo lynx-core.lo" ;;
sparcnetbsd_vec) tb="$tb sparcnetbsd.lo aout32.lo" ;;
- sparccoff_vec) tb="$tb coff-sparc.lo" ;;
srec_vec) tb="$tb srec.lo" ;;
sunos_big_vec) tb="$tb sunos.lo aout32.lo" ;;
symbolsrec_vec) tb="$tb srec.lo" ;;
tekhex_vec) tb="$tb tekhex.lo" ;;
tic30_aout_vec) tb="$tb aout-tic30.lo" ;;
tic30_coff_vec) tb="$tb coff-tic30.lo" ;;
- tic54x_coff0_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff0_beh_vec) tb="$tb coff-tic54x.lo" ;;
- tic54x_coff1_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff0_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff1_beh_vec) tb="$tb coff-tic54x.lo" ;;
- tic54x_coff2_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff1_vec) tb="$tb coff-tic54x.lo" ;;
tic54x_coff2_beh_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff2_vec) tb="$tb coff-tic54x.lo" ;;
tic80coff_vec) tb="$tb coff-tic80.lo cofflink.lo" ;;
versados_vec) tb="$tb versados.lo" ;;
- vms_alpha_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo"
- target64=true ;;
+ vms_alpha_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo"; target_size=64 ;;
vms_vax_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo" ;;
w65_vec) tb="$tb coff-w65.lo reloc16.lo" ;;
we32kcoff_vec) tb="$tb coff-we32k.lo" ;;
"") ;;
*) { echo "configure: error: *** unknown target vector $vec" 1>&2; exit 1; } ;;
esac
+
+ if test ${target_size} = 64; then
+ target64=true
+ fi
+ if test x"${vec}" = x"${defvec}"; then
+ bfd_default_target_size=${target_size}
+ fi
done
# Target architecture .o files.
case ${host64}-${target64}-${want64} in
*true*)
wordsize=64
+ bfd_libs='$(BFD64_LIBS) $(BFD32_LIBS)'
all_backends='$(BFD64_BACKENDS) $(BFD32_BACKENDS)'
if test -z "$GCC" && test "$BFD_HOST_64BIT_LONG" = "0" && test "$BFD_HOST_64_BIT_DEFINED" = "0"; then
echo "configure: warning: You have requested a 64 bit BFD configuration, but" 1>&2
echo "configure: warning: your compiler may not have a 64 bit integral type" 1>&2
fi
+ if test -n "$GCC" ; then
+ bad_64bit_gcc=no;
+ echo $ac_n "checking for gcc version with buggy 64-bit support""... $ac_c" 1>&6
+echo "configure:6244: checking for gcc version with buggy 64-bit support" >&5
+ # Add more tests for gcc versions with non-working 64-bit support here.
+ cat > conftest.$ac_ext <<EOF
+#line 6247 "configure"
+#include "confdefs.h"
+:__GNUC__:__GNUC_MINOR__:__i386__:
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep ": 2 : 91 : 1 :" >/dev/null 2>&1; then
+ rm -rf conftest*
+ bad_64bit_gcc=yes;
+ echo "$ac_t""yes: egcs-1.1.2 on ix86 spotted" 1>&6
+else
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+ if test $bad_64bit_gcc = yes ; then
+ { echo "configure: error: A newer version of gcc is needed for the requested 64-bit BFD configuration" 1>&2; exit 1; }
+ fi
+ fi
;;
false-false-false)
wordsize=32
+ bfd_libs='$(BFD32_LIBS)'
all_backends='$(BFD32_BACKENDS)'
;;
esac
+
+
tdefaults=""
test -n "${defvec}" && tdefaults="${tdefaults} -DDEFAULT_VECTOR=${defvec}"
test -n "${selvecs}" && tdefaults="${tdefaults} -DSELECT_VECS='${selvecs}'"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5354: checking for $ac_hdr" >&5
+echo "configure:6292: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5359 "configure"
+#line 6297 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5364: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6302: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5393: checking for $ac_func" >&5
+echo "configure:6331: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5398 "configure"
+#line 6336 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:5446: checking for working mmap" >&5
+echo "configure:6384: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 5454 "configure"
+#line 6392 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:5594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5619: checking for $ac_func" >&5
+echo "configure:6557: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5624 "configure"
+#line 6562 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5647: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
+s%@bfd_version@%$bfd_version%g
+s%@bfd_version_date@%$bfd_version_date%g
+s%@bfd_version_string@%$bfd_version_string%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@WARN_CFLAGS@%$WARN_CFLAGS%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
s%@USE_NLS@%$USE_NLS%g
s%@WIN32LIBADD@%$WIN32LIBADD%g
s%@TDEFINES@%$TDEFINES%g
s%@wordsize@%$wordsize%g
+s%@bfd_libs@%$bfd_libs%g
s%@all_backends@%$all_backends%g
s%@bfd_backends@%$bfd_backends%g
s%@bfd_machines@%$bfd_machines%g
+s%@bfd_default_target_size@%$bfd_default_target_size%g
s%@tdefaults@%$tdefaults%g
CEOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile
+sed -e '/SRC-POTFILES =/r po/SRC-POTFILES' -e '/BLD-POTFILES =/r po/BLD-POTFILES' po/Makefile.in > po/Makefile
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+