ac_help="$ac_help
--with-gnu-ld assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
- --disable-libtool-lock force libtool not to do file locking"
+ --disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)"
ac_help="$ac_help
--enable-commonbfdlib build shared BFD/opcodes/libiberty library"
ac_help="$ac_help
--with-mmap try using mmap for BFD input files if available"
+ac_help="$ac_help
+ --enable-build-warnings Enable build-time compiler warnings if gcc is used"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
program_transform_name=s,x,x,
silent=
site=
-sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
- --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
- -site-file | --site-file | --site-fil | --site-fi | --site-f)
- ac_prev=sitefile ;;
- -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
- sitefile="$ac_optarg" ;;
-
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
-else
- CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:609: checking host system type" >&5
+echo "configure:600: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:630: checking target system type" >&5
+echo "configure:621: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:648: checking build system type" >&5
+echo "configure:639: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:673: checking for $ac_word" >&5
+echo "configure:664: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:703: checking for $ac_word" >&5
+echo "configure:694: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:754: checking for $ac_word" >&5
+echo "configure:745: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:786: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:777: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 797 "configure"
+#line 788 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:793: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:828: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:833: checking whether we are using GNU C" >&5
+echo "configure:824: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:861: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:852: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:893: checking for POSIXized ISC" >&5
+echo "configure:884: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:926: checking for a BSD compatible install" >&5
+echo "configure:917: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:979: checking whether build environment is sane" >&5
+echo "configure:970: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1036: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1027: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1082: checking for working aclocal" >&5
+echo "configure:1073: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1095: checking for working autoconf" >&5
+echo "configure:1086: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1108: checking for working automake" >&5
+echo "configure:1099: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1121: checking for working autoheader" >&5
+echo "configure:1112: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1134: checking for working makeinfo" >&5
+echo "configure:1125: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1157: checking for $ac_word" >&5
+echo "configure:1148: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1189: checking for $ac_word" >&5
+echo "configure:1180: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1221: checking for $ac_word" >&5
+echo "configure:1212: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1327: checking for $ac_word" >&5
+echo "configure:1318: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1366: checking for ld used by GCC" >&5
+echo "configure:1357: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
- /* | [A-Za-z]:[\\/]*)
+ [\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1390: checking for GNU ld" >&5
+echo "configure:1381: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1393: checking for non-GNU ld" >&5
+echo "configure:1384: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog"; then
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1429: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1419: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1445: checking for BSD-compatible nm" >&5
+echo "configure:1435: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Let the user override the test.
ac_cv_path_NM="$NM"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
-echo "configure:1483: checking command to parse $NM output" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* \($ac_symcode\) *\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if { (eval echo configure:1546: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if { (eval echo configure:1550: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftestm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftestm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo configure:1602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&5
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.c >&5
- fi
- rm -rf conftest*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-echo "$ac_t""$ac_result" 1>&6
-
-echo $ac_n "checking for _ prefix in compiled symbols""... $ac_c" 1>&6
-echo "configure:1648: checking for _ prefix in compiled symbols" >&5
-if eval "test \"`echo '$''{'ac_cv_sys_symbol_underscore'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if { (eval echo configure:1657: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if { (eval echo configure:1660: \"$NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5; } && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&5
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&5
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.c >&5
-fi
-rm -rf conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_sys_symbol_underscore" 1>&6
-USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1686: checking whether ln -s works" >&5
+echo "configure:1471: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1722 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1723: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1520 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1521: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1744: checking whether the C compiler needs -belf" >&5
+echo "configure:1542: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1749 "configure"
+#line 1547 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
fi
;;
-*-*-cygwin*)
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1779: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_DLLTOOL"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1811: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL="dlltool"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false"
-fi
-fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
- echo "$ac_t""$DLLTOOL" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- DLLTOOL="false"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1846: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_AS"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1878: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS="as"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false"
-fi
-fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
- echo "$ac_t""$AS" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- AS="false"
-fi
-fi
-
-
- ;;
esac
-# enable the --disable-libtool-lock switch
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
- need_locks=$enableval
-else
- need_locks=yes
-fi
-
-
-if test x"$need_locks" = xno; then
- libtool_flags="$libtool_flags --disable-lock"
-fi
-
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
-DLLTOOL="$DLLTOOL" AS="$AS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
want_mmap=false
fi
+build_warnings="-W -Wall"
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+ enableval="$enable_build_warnings"
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+
+
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2079: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1749: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:2102: checking for Cygwin environment" >&5
+echo "configure:1772: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2107 "configure"
+#line 1777 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:2118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:2135: checking for mingw32 environment" >&5
+echo "configure:1805: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2140 "configure"
+#line 1810 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:2147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1817: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2166: checking for executable suffix" >&5
+echo "configure:1836: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2205: checking for $ac_word" >&5
+echo "configure:1875: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2235: checking for $ac_word" >&5
+echo "configure:1905: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2286: checking for $ac_word" >&5
+echo "configure:1956: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2318: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1988: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2329 "configure"
+#line 1999 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2360: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2030: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2365: checking whether we are using GNU C" >&5
+echo "configure:2035: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2044: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2393: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2063: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ALL_LINGUAS=
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2427: checking how to run the C preprocessor" >&5
+echo "configure:2097: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2442 "configure"
+#line 2112 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2448: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2118: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2459 "configure"
+#line 2129 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2465: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2476 "configure"
+#line 2146 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2482: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2507: checking for ANSI C header files" >&5
+echo "configure:2177: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2512 "configure"
+#line 2182 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2520: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2190: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2537 "configure"
+#line 2207 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2555 "configure"
+#line 2225 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2576 "configure"
+#line 2246 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2611: checking for working const" >&5
+echo "configure:2281: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2616 "configure"
+#line 2286 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2665: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2335: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:2686: checking for inline" >&5
+echo "configure:2356: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 2693 "configure"
+#line 2363 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:2700: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2370: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:2726: checking for off_t" >&5
+echo "configure:2396: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2731 "configure"
+#line 2401 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:2759: checking for size_t" >&5
+echo "configure:2429: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2764 "configure"
+#line 2434 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2794: checking for working alloca.h" >&5
+echo "configure:2464: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2799 "configure"
+#line 2469 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2827: checking for alloca" >&5
+echo "configure:2497: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2832 "configure"
+#line 2502 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2892: checking whether alloca needs Cray hooks" >&5
+echo "configure:2562: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2897 "configure"
+#line 2567 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2922: checking for $ac_func" >&5
+echo "configure:2592: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2927 "configure"
+#line 2597 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2977: checking stack direction for C alloca" >&5
+echo "configure:2647: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2985 "configure"
+#line 2655 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3029: checking for $ac_hdr" >&5
+echo "configure:2699: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3034 "configure"
+#line 2704 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3039: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3068: checking for $ac_func" >&5
+echo "configure:2738: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3073 "configure"
+#line 2743 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2766: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3121: checking for working mmap" >&5
+echo "configure:2791: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 3129 "configure"
+#line 2799 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:3269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3297: checking for $ac_hdr" >&5
+echo "configure:2967: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3302 "configure"
+#line 2972 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2977: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3337: checking for $ac_func" >&5
+echo "configure:3007: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3342 "configure"
+#line 3012 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3394: checking for $ac_func" >&5
+echo "configure:3064: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3399 "configure"
+#line 3069 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3456: checking for LC_MESSAGES" >&5
+echo "configure:3126: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3461 "configure"
+#line 3131 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:3468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3489: checking whether NLS is requested" >&5
+echo "configure:3159: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3509: checking whether included gettext is requested" >&5
+echo "configure:3179: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3528: checking for libintl.h" >&5
+echo "configure:3198: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3533 "configure"
+#line 3203 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3538: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3208: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:3555: checking for gettext in libc" >&5
+echo "configure:3225: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3560 "configure"
+#line 3230 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:3583: checking for bindtextdomain in -lintl" >&5
+echo "configure:3253: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3591 "configure"
+#line 3261 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:3602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:3618: checking for gettext in libintl" >&5
+echo "configure:3288: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3623 "configure"
+#line 3293 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:3630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3658: checking for $ac_word" >&5
+echo "configure:3328: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3692: checking for $ac_func" >&5
+echo "configure:3362: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3697 "configure"
+#line 3367 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3747: checking for $ac_word" >&5
+echo "configure:3417: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3783: checking for $ac_word" >&5
+echo "configure:3453: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 3815 "configure"
+#line 3485 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:3823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3855: checking for $ac_word" >&5
+echo "configure:3525: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3889: checking for $ac_word" >&5
+echo "configure:3559: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3925: checking for $ac_word" >&5
+echo "configure:3595: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4015: checking for catalogs to be installed" >&5
+echo "configure:3685: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4043: checking for linux/version.h" >&5
+echo "configure:3713: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4048 "configure"
+#line 3718 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4053: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3723: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:4131: checking for a BSD compatible install" >&5
+echo "configure:3801: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
EXEEXT_FOR_BUILD='$(EXEEXT)'
else
echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6
-echo "configure:4214: checking for build system executable suffix" >&5
+echo "configure:3884: checking for build system executable suffix" >&5
if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4242: checking for $ac_hdr" >&5
+echo "configure:3912: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4247 "configure"
+#line 3917 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4252: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3922: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4282: checking for $ac_hdr" >&5
+echo "configure:3952: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4287 "configure"
+#line 3957 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4292: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3962: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4319: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:3989: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4324 "configure"
+#line 3994 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:4333: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:4358: checking for $ac_hdr that defines DIR" >&5
+echo "configure:4028: checking for $ac_hdr that defines DIR" >&5
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4363 "configure"
+#line 4033 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:4371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:4396: checking for opendir in -ldir" >&5
+echo "configure:4066: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4404 "configure"
+#line 4074 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:4437: checking for opendir in -lx" >&5
+echo "configure:4107: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4445 "configure"
+#line 4115 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:4456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in fcntl getpagesize setitimer sysconf fdopen getuid getgid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4481: checking for $ac_func" >&5
+echo "configure:4151: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4486 "configure"
+#line 4156 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
esac
echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6
-echo "configure:4544: checking whether strstr must be declared" >&5
+echo "configure:4214: checking whether strstr must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4549 "configure"
+#line 4219 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) strstr
; return 0; }
EOF
-if { (eval echo configure:4570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4240: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_strstr=no
else
fi
echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
-echo "configure:4591: checking whether malloc must be declared" >&5
+echo "configure:4261: checking whether malloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4596 "configure"
+#line 4266 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) malloc
; return 0; }
EOF
-if { (eval echo configure:4617: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4287: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_malloc=no
else
fi
echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
-echo "configure:4638: checking whether realloc must be declared" >&5
+echo "configure:4308: checking whether realloc must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4643 "configure"
+#line 4313 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) realloc
; return 0; }
EOF
-if { (eval echo configure:4664: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_realloc=no
else
fi
echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
-echo "configure:4685: checking whether free must be declared" >&5
+echo "configure:4355: checking whether free must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4690 "configure"
+#line 4360 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) free
; return 0; }
EOF
-if { (eval echo configure:4711: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4381: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_free=no
else
fi
echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6
-echo "configure:4732: checking whether getenv must be declared" >&5
+echo "configure:4402: checking whether getenv must be declared" >&5
if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4737 "configure"
+#line 4407 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) getenv
; return 0; }
EOF
-if { (eval echo configure:4758: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_decl_needed_getenv=no
else
hppa*-*-mpeix*) COREFILE=hpux-core.lo ;;
hppa*-*-bsd*) COREFILE="hpux-core.lo hppabsd-core.lo"
COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
+ i370-*-*)
+ COREFILE=trad-core.lo
+ TRAD_HEADER='"hosts/i370linux.h"'
+ ;;
+
i[3456]86-sequent-bsd*)
- COREFILE=trad-core.lo;
+ COREFILE=trad-core.lo
TRAD_HEADER='"hosts/symmetry.h"'
;;
i[3456]86-sequent-sysv4*) ;;
COREFILE=netbsd-core.lo
;;
rs6000-*-lynx*) COREFILE=lynx-core.lo ;;
+ rs6000-*-aix4.[3-9]* | powerpc-*-aix4.[3-9]*)
+ COREFILE=rs6000-core.lo
+ COREFLAG="$COREFLAG -DAIX_CORE_DUMPX_CORE"
+ ;;
rs6000-*-aix4*) COREFILE=rs6000-core.lo ;;
rs6000-*-*) COREFILE=rs6000-core.lo ;;
powerpc-*-*bsd*) COREFILE=netbsd-core.lo ;;
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4959: checking for $ac_hdr" >&5
+echo "configure:4638: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4964 "configure"
+#line 4643 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$ac_cv_header_sys_procfs_h" = yes; then
echo $ac_n "checking for prstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:4997: checking for prstatus_t in sys/procfs.h" >&5
+echo "configure:4676: checking for prstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5002 "configure"
+#line 4681 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5009: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4688: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prstatus_t" 1>&6
echo $ac_n "checking for prstatus_t.pr_who in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5031: checking for prstatus_t.pr_who in sys/procfs.h" >&5
+echo "configure:4710: checking for prstatus_t.pr_who in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5036 "configure"
+#line 4715 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prstatus_t avar; void* aref = (void*) &avar.pr_who
; return 0; }
EOF
-if { (eval echo configure:5043: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4722: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_prstatus_t_pr_who" 1>&6
echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5065: checking for pstatus_t in sys/procfs.h" >&5
+echo "configure:4744: checking for pstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5070 "configure"
+#line 4749 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
pstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5077: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_pstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
echo $ac_n "checking for prpsinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5099: checking for prpsinfo_t in sys/procfs.h" >&5
+echo "configure:4778: checking for prpsinfo_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prpsinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5104 "configure"
+#line 4783 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
prpsinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:5111: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_prpsinfo_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_prpsinfo_t" 1>&6
echo $ac_n "checking for psinfo_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5133: checking for psinfo_t in sys/procfs.h" >&5
+echo "configure:4812: checking for psinfo_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_psinfo_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5138 "configure"
+#line 4817 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
psinfo_t avar
; return 0; }
EOF
-if { (eval echo configure:5145: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4824: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_psinfo_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_psinfo_t" 1>&6
echo $ac_n "checking for lwpstatus_t in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5167: checking for lwpstatus_t in sys/procfs.h" >&5
+echo "configure:4846: checking for lwpstatus_t in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_lwpstatus_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5172 "configure"
+#line 4851 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar
; return 0; }
EOF
-if { (eval echo configure:5179: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4858: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_lwpstatus_t=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_lwpstatus_t" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_context in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5201: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
+echo "configure:4880: checking for lwpstatus_t.pr_context in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5206 "configure"
+#line 4885 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_context
; return 0; }
EOF
-if { (eval echo configure:5213: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4892: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context=yes
else
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_context" 1>&6
echo $ac_n "checking for lwpstatus_t.pr_reg in sys/procfs.h""... $ac_c" 1>&6
-echo "configure:5235: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
+echo "configure:4914: checking for lwpstatus_t.pr_reg in sys/procfs.h" >&5
if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5240 "configure"
+#line 4919 "configure"
#include "confdefs.h"
#include <sys/procfs.h>
int main() {
lwpstatus_t avar; void* aref = (void*) &avar.pr_reg
; return 0; }
EOF
-if { (eval echo configure:5247: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg=yes
else
fi
echo "$ac_t""$bfd_cv_have_sys_procfs_type_member_lwpstatus_t_pr_reg" 1>&6
+ echo $ac_n "checking for win32_pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4948: checking for win32_pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_win32_pstatus_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4953 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+win32_pstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_win32_pstatus_t=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ bfd_cv_have_sys_procfs_type_win32_pstatus_t=no
+
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_win32_pstatus_t = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_WIN32_PSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_win32_pstatus_t" 1>&6
+
fi
fi
if test -n "$enable_targets" ; then
for targ in `echo $enable_targets | sed 's/,/ /g'`
do
- result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $targ 2>/dev/null`
+ result=`$ac_config_sub $targ 2>/dev/null`
if test -n "$result" ; then
canon_targets="$canon_targets $result"
else
# 64-bit support needs to be compiled in. Currently, it will be included if
# the default or any other explicitly requested target requires it; it
# will not be included on a 32-bit host if no 64-bit target is requested, and
-# no "--with-64-bit-bfd" option is given, even if "--with-targets=all" is
+# no "--with-64-bit-bfd" option is given, even if "--enable-targets=all" is
# used.
# uniq the default and selected vectors in all the configured targets.
a_out_adobe_vec) tb="$tb aout-adobe.lo aout32.lo" ;;
armcoff_little_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
armcoff_big_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
- armpe_little_vec) tb="$tb pe-arm.lo cofflink.lo " ;;
- armpe_big_vec) tb="$tb pe-arm.lo cofflink.lo " ;;
- armpei_little_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
- armpei_big_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
- arm_epoc_pe_little_vec) tb="$tb epoc-pe-arm.lo cofflink.lo " ;;
- arm_epoc_pe_big_vec) tb="$tb epoc-pe-arm.lo cofflink.lo " ;;
- arm_epoc_pei_little_vec) tb="$tb epoc-pei-arm.lo cofflink.lo " ;;
- arm_epoc_pei_big_vec) tb="$tb epoc-pei-arm.lo cofflink.lo " ;;
+ armnetbsd_vec) tb="$tb armnetbsd.lo aout32.lo" ;;
+ armpe_little_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpe_big_vec) tb="$tb pe-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_little_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ armpei_big_vec) tb="$tb pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_little_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pe_big_vec) tb="$tb epoc-pe-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_little_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
+ arm_epoc_pei_big_vec) tb="$tb epoc-pei-arm.lo peigen.lo cofflink.lo " ;;
aout0_big_vec) tb="$tb aout0.lo aout32.lo" ;;
aout_arm_big_vec) tb="$tb aout-arm.lo aout32.lo" ;;
aout_arm_little_vec) tb="$tb aout-arm.lo aout32.lo" ;;
apollocoff_vec) tb="$tb coff-apollo.lo" ;;
b_out_vec_big_host) tb="$tb bout.lo aout32.lo" ;;
b_out_vec_little_host) tb="$tb bout.lo aout32.lo" ;;
+ bfd_efi_app_ia32_vec) tb="$tb efi-app-ia32.lo peigen.lo cofflink.lo" ;;
+ bfd_efi_app_ia64_vec) tb="$tb efi-app-ia64.lo peigen.lo cofflink.lo"
+ target64=true ;;
bfd_elf64_alpha_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"
target64=true ;;
+ bfd_elf64_hppa_vec) tb="$tb elf64-hppa.lo elf64.lo $elf"
+ target64=true ;;
+ bfd_elf64_ia64_little_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"
+ target64=true ;;
+ bfd_elf64_ia64_big_vec) tb="$tb elf64-ia64.lo elf64.lo $elf"
+ target64=true ;;
+ bfd_efi_app_ia32_vec) tb="$tb efi-app-ia32.lo cofflink.lo" ;;
+ bfd_efi_app_ia64_vec) tb="$tb efi-app-ia64.lo cofflink.lo"
+ target64=true ;;
+ bfd_elf32_avr_vec) tb="$tb elf32-avr.lo elf32.lo $elf" ;;
bfd_elf32_littlearc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
bfd_elf32_littlearm_vec) tb="$tb elfarm-nabi.lo elf32.lo $elf" ;;
bfd_elf32_littlearm_oabi_vec) tb="$tb elfarm-oabi.lo elf32.lo $elf" ;;
bfd_elf32_d30v_vec) tb="$tb elf32-d30v.lo elf32.lo $elf" ;;
bfd_elf32_fr30_vec) tb="$tb elf32-fr30.lo elf32.lo $elf" ;;
bfd_elf32_hppa_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
+ bfd_elf32_i370_vec) tb="$tb elf32-i370.lo elf32.lo $elf" ;;
bfd_elf32_i386_vec) tb="$tb elf32-i386.lo elf32.lo $elf" ;;
bfd_elf32_i860_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
bfd_elf32_i960_vec) tb="$tb elf32-i960.lo elf32.lo $elf" ;;
bfd_elf32_mcore_little_vec) tb="$tb elf32-mcore.lo elf32.lo $elf" ;;
bfd_elf32_mn10200_vec) tb="$tb elf-m10200.lo elf32.lo $elf" ;;
bfd_elf32_mn10300_vec) tb="$tb elf-m10300.lo elf32.lo $elf" ;;
+ bfd_elf32_pj_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
+ bfd_elf32_pjl_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
bfd_elf32_sh_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
target64=true ;;
bfd_elf64_sparc_vec) tb="$tb elf64-sparc.lo elf64.lo $elf"
target64=true ;;
- cisco_core_vec) tb="$tb cisco-core.lo" ;;
+ cisco_core_big_vec) tb="$tb cisco-core.lo" ;;
+ cisco_core_little_vec) tb="$tb cisco-core.lo" ;;
demo_64_vec) tb="$tb demo64.lo aout64.lo"
target64=true ;;
ecoff_big_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
i386dynix_vec) tb="$tb i386dynix.lo aout32.lo" ;;
i386freebsd_vec) tb="$tb i386freebsd.lo aout32.lo" ;;
i386msdos_vec) tb="$tb i386msdos.lo" ;;
- i386pe_vec) tb="$tb pe-i386.lo cofflink.lo " ;;
- i386pei_vec) tb="$tb pei-i386.lo cofflink.lo" ;;
+ i386pe_vec) tb="$tb pe-i386.lo peigen.lo cofflink.lo" ;;
+ i386pei_vec) tb="$tb pei-i386.lo peigen.lo cofflink.lo" ;;
i386linux_vec) tb="$tb i386linux.lo aout32.lo" ;;
i386lynx_aout_vec) tb="$tb i386lynx.lo lynx-core.lo aout32.lo" ;;
i386lynx_coff_vec) tb="$tb cf-i386lynx.lo cofflink.lo lynx-core.lo" ;;
m68kaux_coff_vec) tb="$tb coff-aux.lo coff-m68k.lo cofflink.lo" ;;
m68ksysvcoff_vec) tb="$tb coff-svm68k.lo cofflink.lo" ;;
m88kbcs_vec) tb="$tb coff-m88k.lo" ;;
- mcore_pe_big_vec) tb="$tb pe-mcore.lo cofflink.lo" ;;
- mcore_pe_little_vec) tb="$tb pe-mcore.lo cofflink.lo" ;;
- mcore_pei_big_vec) tb="$tb pei-mcore.lo cofflink.lo" ;;
- mcore_pei_little_vec) tb="$tb pei-mcore.lo cofflink.lo" ;;
+ mipslpe_vec) tb="$tb pe-mips.lo cofflink.lo" ;;
+ mipslpei_vec) tb="$tb pei-mips.lo cofflink.lo" ;;
+ mcore_pe_big_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pe_little_vec) tb="$tb pe-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pei_big_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
+ mcore_pei_little_vec) tb="$tb pei-mcore.lo peigen.lo cofflink.lo" ;;
newsos3_vec) tb="$tb newsos3.lo aout32.lo" ;;
nlm32_i386_vec) tb="$tb nlm32-i386.lo nlm32.lo nlm.lo" ;;
+ rs6000coff64_vec) tb="$tb coff64-rs6000.lo xcofflink.lo"
+ target64=true ;;
nlm32_sparc_vec) tb="$tb nlm32-sparc.lo nlm32.lo nlm.lo" ;;
nlm32_alpha_vec) tb="$tb nlm32-alpha.lo nlm32.lo nlm.lo"
target64=true ;;
pc532machaout_vec) tb="$tb pc532-mach.lo aout-ns32k.lo" ;;
pmac_xcoff_vec) tb="$tb coff-pmac.lo xcofflink.lo" ;;
rs6000coff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
- bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
- bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
- bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
- bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
+ bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
+ bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo peigen.lo cofflink.lo" ;;
ppcboot_vec) tb="$tb ppcboot.lo" ;;
shcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
shlcoff_small_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shlpe_vec) tb="$tb pe-sh.lo coff-sh.lo cofflink.lo" ;;
+ shlpei_vec) tb="$tb pei-sh.lo coff-sh.lo cofflink.lo" ;;
som_vec) tb="$tb som.lo" ;;
sparcle_aout_vec) tb="$tb aout-sparcle.lo aout32.lo" ;;
sparclinux_vec) tb="$tb sparclinux.lo aout32.lo" ;;
tekhex_vec) tb="$tb tekhex.lo" ;;
tic30_aout_vec) tb="$tb aout-tic30.lo" ;;
tic30_coff_vec) tb="$tb coff-tic30.lo" ;;
+ tic54x_coff0_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff0_beh_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff1_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff1_beh_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff2_vec) tb="$tb coff-tic54x.lo" ;;
+ tic54x_coff2_beh_vec) tb="$tb coff-tic54x.lo" ;;
tic80coff_vec) tb="$tb coff-tic80.lo cofflink.lo" ;;
versados_vec) tb="$tb versados.lo" ;;
vms_alpha_vec) tb="$tb vms.lo vms-hdr.lo vms-gsd.lo vms-tir.lo vms-misc.lo"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5597: checking for $ac_hdr" >&5
+echo "configure:5340: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5602 "configure"
+#line 5345 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5607: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5350: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5636: checking for $ac_func" >&5
+echo "configure:5379: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5641 "configure"
+#line 5384 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5664: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:5689: checking for working mmap" >&5
+echo "configure:5432: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 5697 "configure"
+#line 5440 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:5837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
for ac_func in madvise mprotect
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5862: checking for $ac_func" >&5
+echo "configure:5605: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5867 "configure"
+#line 5610 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
s%@SET_MAKE@%$SET_MAKE%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
-s%@USE_SYMBOL_UNDERSCORE@%$USE_SYMBOL_UNDERSCORE%g
s%@LN_S@%$LN_S%g
-s%@DLLTOOL@%$DLLTOOL%g
-s%@AS@%$AS%g
s%@LIBTOOL@%$LIBTOOL%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
projects / deliverable / binutils-gdb.git / blobdiff