# appropriate for this directory. For more information, check any
# existing configure script.
+configdirs="doc"
srctrigger=libbfd.c
-srcname="bfd"
+srcname="BFD"
+target_dependent=true
+host64=false
+target64=false
+want64=false
# per-host:
-if [ "${host_os}" = "posix" ] ; then
- bfd_host=posix
-else
- case "${host_cpu}" in
- rs6000) bfd_host=aix ;;
- mips)
- case "${host_vendor}" in
- dec) bfd_host=dec3100 ;;
- esac
- ;;
- m88k)
- case "${host_vendor}" in
- *)
- case "${host_os}" in
- dgux) bfd_host=dgux ;;
- esac
- ;;
- esac
- ;;
-
- m68k)
- case "${host_vendor}" in
- hp) bfd_host=hp9000 ;;
- sony) bfd_host=news ;;
- sun) bfd_host=sun3 ;;
- esac
- ;;
-
- i386)
- case "${host_vendor}" in
- *)
- case "${host_os}" in
- sysv) bfd_host=i386v ;;
- esac
- ;;
- esac
- ;;
-
- sparc)
- case "${host_vendor}" in
- sun) bfd_host=sun4 ;;
- esac
- ;;
-
- rtpc) bfd_host=rtbsd ;;
- tahoe | vax) bfd_host=${host_cpu} ;;
- esac
-fi
+. ${srcdir}/configure.host
+
+# Set up to make a link between the host's include file and "sysdep.h".
+files="hosts/${my_host}.h"
+links="sysdep.h"
-if [ ! -f config/hmake-${bfd_host} ] ; then
- echo '***' BFD does not support host ${host}
- exit 1
+if [ ! -f ${srcdir}/${files} ] ; then
+ files=../bfd/hosts/std-host.h
+ echo "[${srcname} has no specific support for host ${host} -- using std-host]"
fi
-host_makefile_frag=config/hmake-${bfd_host}
+host_makefile_frag=
+if [ -f ${srcdir}/config/${my_host}.mh ] ; then
+ host_makefile_frag=config/${my_host}.mh
+fi
# per-target:
-case ${target_os} in
-aout | coff | bout) bfd_target=${target_cpu}-${target_os} ;;
-sunos*)
- case "${target_cpu}" in
- m68k) bfd_target=sun3 ;;
- sparc) bfd_target=sun4 ;;
- esac
- ;;
-newsos) bfd_target=news ;;
-*)
- case "${target_cpu}" in
- tahoe | vax)
- bfd_target=${target_cpu} ;;
- mips)
- case "${host_vendor}" in
- dec) bfd_host=dec3100 ;;
- esac
- ;;
- esac
- ;;
+# Canonicalize the secondary target names.
+if [ -n "$enable_targets" ]; then
+ for targ in `echo $enable_targets | sed 's/,/ /g'`
+ do
+ result=`$configsub $targ 2>/dev/null`
+ if [ -n "$result" ]; then
+ canon_targets="$canon_targets $result"
+ else
+ # Allow targets that config.sub doesn't recognize, like "all".
+ canon_targets="$canon_targets $targ"
+ fi
+ done
+fi
+
+all_targets=false
+
+for targ in $target $canon_targets
+do
+ bfd_target=`${config_shell} $srcdir/config.bfd $targ`
+
+ if [ "x$bfd_target" = "xall" ]; then
+ all_targets=true
+ else
+ if [ ! -f ${srcdir}/config/${bfd_target}.mt ] ; then
+ echo '***' No file ${srcdir}/config/${bfd_target}.mt 1>&2
+ echo '***' BFD does not support target ${bfd_target} 1>&2
+ echo '***' Look in bfd/config.bfd for supported targets 1>&2
+ exit 1
+ fi
+
+ if [ "x$targ" = "x$target" ]; then
+ target_makefile_frag=${srcdir}/config/${bfd_target}.mt
+ else
+ target_extra_frags="$target_extra_frags ${srcdir}/config/${bfd_target}.mt"
+ fi
+ fi
+done
+
+# We don't do any links based on the target system, just makefile config.
+
+# post-target:
+
+rm -f Makefile.tmp Makefile.2
+mv Makefile Makefile.tmp
+
+case ${enable_64_bit_bfd} in
+ yes) want64=true ;;
+ no | "") want64=false ;;
+ *)
+ echo "*** bad value \"${enable_64_bit_bfd}\" for 64-bit-bfd flag; ignored" 1>&2
+ ;;
esac
-if [ ! -f config/tmake-${bfd_target} ] ; then
- echo '***' BFD does not support target ${target}
- exit 1
-fi
+# This processing still needs to be done if we're to decide properly whether
+# 64-bit support needs to be compiled in. Currently, it will be included if
+# the default or any other explicitly requested target requires it; it
+# will not be included on a 32-bit host if no 64-bit target is requested, and
+# no "--with-64-bit-bfd" option is given, even if "--with-targets=all" is
+# used.
+
+# The default vector in the primary target.
+DEFAULT_VECTOR=`sed -n '
+s/DEFAULT_VECTOR[ ]*=[ ]*\([^ ]*\)/\1/p
+' $target_makefile_frag`
+
+allfrags="$target_makefile_frag $target_extra_frags"
+
+# The default and selected vectors in all the configured targets.
+SELECT_VECS=`sed -n '
+s/DEFAULT_VECTOR[ ]*=[ ]*\([^ ]*\)/\1/p
+s/SELECT_VECS[ ]*=[ ]*\([^ ]*\)/\1/p
+' $allfrags`
+# uniq the list.
+f=""
+for i in $SELECT_VECS ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+SELECT_VECS="$f"
+
+# The architectures in all the configured targets.
+SELECT_ARCHITECTURES=`sed -n '
+s/SELECT_ARCHITECTURES[ ]*=[ ]*//p
+' $allfrags`
+# uniq the list.
+f=""
+for i in $SELECT_ARCHITECTURES ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+SELECT_ARCHITECTURES="$f"
+
+# Target backend .o files.
+tb=
+
+for vec in $SELECT_VECS
+do
+ case "$vec" in
+ # This list is alphabetized to make it easy to compare
+ # with the two vector lists in targets.c.
+ a29kcoff_big_vec) tb="$tb coff-a29k.o cofflink.o" ;;
+ a_out_adobe_vec) tb="$tb aout-adobe.o aout32.o stab-syms.o" ;;
+ aout0_big_vec) tb="$tb aout0.o aout32.o stab-syms.o" ;;
+ aout_mips_big_vec) tb="$tb mipsbsd.o aout32.o stab-syms.o" ;;
+ aout_mips_little_vec) tb="$tb mipsbsd.o aout32.o stab-syms.o" ;;
+ apollocoff_vec) tb="$tb coff-apollo.o" ;;
+ b_out_vec_big_host) tb="$tb bout.o aout32.o stab-syms.o" ;;
+ b_out_vec_little_host) tb="$tb bout.o aout32.o stab-syms.o" ;;
+# start-sanitize-arc
+ bfd_elf32_littlearc_vec) tb="$tb elf32-arc.o elf32.o elf.o" ;;
+ bfd_elf32_bigarc_vec) tb="$tb elf32-arc.o elf32.o elf.o" ;;
+# end-sanitize-arc
+ bfd_elf32_big_generic_vec) tb="$tb elf32-gen.o elf32.o elf.o" ;;
+ bfd_elf32_bigmips_vec) tb="$tb elf32-mips.o elf32.o elf.o ecofflink.o" ;;
+ bfd_elf32_hppa_vec) tb="$tb elf32-hppa.o elf32.o elf.o" ;;
+ bfd_elf32_i386_vec) tb="$tb elf32-i386.o elf32.o elf.o" ;;
+ bfd_elf32_i860_vec) tb="$tb elf32-i860.o elf32.o elf.o" ;;
+ bfd_elf32_little_generic_vec) tb="$tb elf32-gen.o elf32.o elf.o" ;;
+ bfd_elf32_littlemips_vec) tb="$tb elf32-mips.o elf32.o elf.o ecofflink.o" ;;
+ bfd_elf32_m68k_vec) tb="$tb elf32-m68k.o elf32.o elf.o" ;;
+ bfd_elf32_m88k_vec) tb="$tb elf32-m88k.o elf32.o elf.o" ;;
+ bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.o elf32.o elf.o" ;;
+ bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.o elf32.o elf.o" ;;
+ bfd_elf32_sparc_vec) tb="$tb elf32-sparc.o elf32.o elf.o" ;;
+ bfd_elf64_big_generic_vec) tb="$tb elf64-gen.o elf64.o elf.o"
+ target64=true ;;
+ bfd_elf64_little_generic_vec) tb="$tb elf64-gen.o elf64.o elf.o"
+ target64=true ;;
+ bfd_elf64_sparc_vec) tb="$tb elf64-sparc.o elf64.o elf.o"
+ target64=true ;;
+ cisco_core_vec) tb="$tb cisco-core.o" ;;
+ demo_64_vec) tb="$tb demo64.o aout64.o stab-syms.o"
+ target64=true ;;
+ ecoff_big_vec) tb="$tb coff-mips.o ecoff.o ecofflink.o" ;;
+ ecoff_little_vec) tb="$tb coff-mips.o ecoff.o ecofflink.o" ;;
+ ecoffalpha_little_vec) tb="$tb coff-alpha.o ecoff.o ecofflink.o"
+ target64=true ;;
+ h8300coff_vec) tb="$tb coff-h8300.o reloc16.o" ;;
+ h8500coff_vec) tb="$tb coff-h8500.o reloc16.o" ;;
+ host_aout_vec) tb="$tb host-aout.o aout32.o stab-syms.o" ;;
+ hp300bsd_vec) tb="$tb hp300bsd.o aout32.o stab-syms.o" ;;
+ hp300hpux_vec) tb="$tb hp300hpux.o aout32.o stab-syms.o" ;;
+ i386aout_vec) tb="$tb i386aout.o aout32.o stab-syms.o" ;;
+ i386bsd_vec) tb="$tb i386bsd.o aout32.o stab-syms.o" ;;
+ i386dynix_vec) tb="$tb i386dynix.o aout32.o stab-syms.o" ;;
+ i386coff_vec) tb="$tb coff-i386.o cofflink.o" ;;
+ i386msdos_vec) tb="$tb i386msdos.o" ;;
+ i386linux_vec) tb="$tb i386linux.o aout32.o stab-syms.o" ;;
+ i386lynx_aout_vec) tb="$tb i386lynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ i386lynx_coff_vec) tb="$tb cf-i386lynx.o cofflink.o lynx-core.o stab-syms.o" ;;
+ i386mach3_vec) tb="$tb i386mach3.o aout32.o stab-syms.o" ;;
+ i386netbsd_vec) tb="$tb i386netbsd.o aout32.o stab-syms.o" ;;
+ i386os9k_vec) tb="$tb i386os9k.o aout32.o stab-syms.o" ;;
+ icoff_big_vec) tb="$tb coff-i960.o" ;;
+ icoff_little_vec) tb="$tb coff-i960.o" ;;
+ ieee_vec) tb="$tb ieee.o" ;;
+ m68kcoff_vec) tb="$tb coff-m68k.o cofflink.o" ;;
+ m68kcoffun_vec) tb="$tb coff-u68k.o coff-m68k.o cofflink.o" ;;
+ m68klynx_aout_vec) tb="$tb m68klynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ m68klynx_coff_vec) tb="$tb cf-m68klynx.o coff-m68k.o cofflink.o lynx-core.o stab-syms.o" ;;
+ m68knetbsd_vec) tb="$tb m68knetbsd.o aout32.o stab-syms.o" ;;
+ m88kbcs_vec) tb="$tb coff-m88k.o" ;;
+ newsos3_vec) tb="$tb newsos3.o aout32.o stab-syms.o" ;;
+ nlm32_i386_vec) tb="$tb nlm32-i386.o nlm32.o nlm.o" ;;
+ nlm32_sparc_vec) tb="$tb nlm32-sparc.o nlm32.o nlm.o" ;;
+ nlm32_alpha_vec) tb="$tb nlm32-alpha.o nlm32.o nlm.o"
+ target64=true ;;
+ riscix_vec) tb="$tb aout32.o riscix.o stab-syms.o" ;;
+ nlm32_powerpc_vec) tb="$tb nlm32-ppc.o nlm32.o nlm.o" ;;
+ pc532netbsd_vec) tb="$tb ns32knetbsd.o aout-ns32k.o stab-syms.o" ;;
+ pc532machaout_vec) tb="$tb pc532-mach.o aout-ns32k.o stab-syms.o" ;;
+ rs6000coff_vec) tb="$tb coff-rs6000.o" ;;
+ shcoff_vec) tb="$tb coff-sh.o cofflink.o" ;;
+# start-sanitize-rce
+ rce_aout_vec) tb="$tb aout-rce.o aout32.o stab-syms.o" ;;
+# end-sanitize-rce
+ shlcoff_vec) tb="$tb coff-sh.o cofflink.o" ;;
+ som_vec) tb="$tb som.o" ;;
+ sparclynx_aout_vec) tb="$tb sparclynx.o lynx-core.o aout32.o stab-syms.o" ;;
+ sparclynx_coff_vec) tb="$tb cf-sparclynx.o lynx-core.o stab-syms.o" ;;
+ sparcnetbsd_vec) tb="$tb sparcnetbsd.o aout32.o stab-syms.o" ;;
+ sparccoff_vec) tb="$tb coff-sparc.o" ;;
+ srec_vec) tb="$tb srec.o" ;;
+ sunos_big_vec) tb="$tb sunos.o aout32.o stab-syms.o" ;;
+ symbolsrec_vec) tb="$tb srec.o" ;;
+ tekhex_vec) tb="$tb tekhex.o" ;;
+ we32kcoff_vec) tb="$tb coff-we32k.o" ;;
+ z8kcoff_vec) tb="$tb coff-z8k.o reloc16.o" ;;
+ w65_vec) tb="$tb coff-w65.o reloc16.o" ;;
+
+ "") ;;
+ *) echo "*** unknown target vector $vec" 1>&2; exit 1 ;;
+ esac
+done
+
+# Target architecture .o files.
+ta=`echo $SELECT_ARCHITECTURES | sed -e s/bfd_/cpu-/g -e s/_arch/.o/g`
+
+# Weed out duplicate .o files.
+f=""
+for i in $tb ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+tb="$f"
+
+f=""
+for i in $ta ; do
+ case " $f " in
+ *" $i "*) ;;
+ *) f="$f $i" ;;
+ esac
+done
+ta="$f"
+
+bfd_backends="$tb"
+bfd_machines="$ta"
+
+if [ x${all_targets} = xtrue ]; then
+ bfd_backends="${bfd_backends}"' $(ALL_BACKENDS)'
+ bfd_machines="${bfd_machines}"' $(ALL_MACHINES)'
+else # all_targets is true
+ # Only set these if they will be nonempty, for the clever echo.
+ test -n "$SELECT_VECS" &&
+ selvecs=`echo $SELECT_VECS | sed -e 's/^/\&/' -e 's/ \(.\)/,\&\1/g'`
+ test -n "SELECT_ARCHITECTURES" &&
+ selarchs=`echo $SELECT_ARCHITECTURES | sed -e 's/ \(.\)/,\1/g'`
+fi # all_targets is true
+
+case ${host64}-${target64}-${want64} in
+ *true*)
+ wordsize=64
+ all_backends='$(BFD64_BACKENDS) $(BFD32_BACKENDS)'
+ ;;
+ false-false-false)
+ wordsize=32
+ all_backends='$(BFD32_BACKENDS)'
+ ;;
+esac
+
+echo WORDSIZE=${wordsize} >> Makefile.2
+echo ALL_BACKENDS=${all_backends} >> Makefile.2
+echo BFD_BACKENDS=${bfd_backends} >> Makefile.2
+echo BFD_MACHINES=${bfd_machines} >> Makefile.2
+
+test -n "$DEFAULT_VECTOR" && defvec="$DEFAULT_VECTOR"
-target_makefile_fragment=config/tmake-${bfd_target}
+tdefaults="TDEFAULTS ="
+test -n "${defvec}" && tdefaults="${tdefaults} -DDEFAULT_VECTOR=${defvec}"
+test -n "${selvecs}" && tdefaults="${tdefaults} -DSELECT_VECS='${selvecs}'"
+test -n "${selarchs}" && tdefaults="${tdefaults} -DSELECT_ARCHITECTURES='${selarchs}'"
+echo "${tdefaults}" >> Makefile.2
-files=
-links=
+cat Makefile.tmp >> Makefile.2
+rm -f Makefile.tmp
+mv Makefile.2 Makefile