-# This file is a shell script that supplies the information necessary
-# to tailor a template configure script into the configure script
-# appropriate for this directory. For more information, check any
-# existing configure script.
-
-configdirs="doc"
-srctrigger=libbfd.c
-srcname="BFD"
-target_dependent=true
+dnl Process this file with autoconf to produce a configure script.
+dnl
+AC_PREREQ(2.5)
+AC_INIT(libbfd.c)
+
+AC_CANONICAL_SYSTEM
+AC_ISC_POSIX
+
+AM_INIT_AUTOMAKE(bfd, 2.8.2)
+
+AM_PROG_LIBTOOL
+
+AC_ARG_ENABLE(64-bit-bfd,
+[ --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)],
+[case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for 64-bit-bfd option) ;;
+esac],[want64=false])dnl
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])dnl
+AC_ARG_ENABLE(commonbfdlib,
+[ --enable-commonbfdlib build shared BFD/opcodes/libiberty library],
+[case "${enableval}" in
+ yes) commonbfdlib=true ;;
+ no) commonbfdlib=false ;;
+ *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;;
+esac])dnl
+AC_ARG_WITH(mmap,
+[ --with-mmap try using mmap for BFD input files if available],
+[case "${withval}" in
+ yes) want_mmap=true ;;
+ no) want_mmap=false ;;
+ *) AC_MSG_ERROR(bad value ${withval} for BFD with-mmap option) ;;
+esac],[want_mmap=false])dnl
+
+AM_CONFIG_HEADER(config.h:config.in)
+
+if test -z "$target" ; then
+ AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
+fi
+AC_ARG_PROGRAM
+
+AM_MAINTAINER_MODE
+AM_CYGWIN32
+AM_EXEEXT
+
host64=false
target64=false
-want64=false
-# per-host:
+# host stuff:
-. ${srcdir}/configure.host
+AC_PROG_CC
-# Set up to make a link between the host's include file and "sysdep.h".
-files="hosts/${my_host}.h"
-links="sysdep.h"
+# Permit host specific settings.
+. ${srcdir}/configure.host
-if [ ! -f ${srcdir}/${files} ] ; then
- files=../bfd/hosts/std-host.h
- echo "[${srcname} has no specific support for host ${host} -- using std-host]"
+AC_SUBST(HDEFINES)
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AM_PROG_INSTALL
+
+BFD_HOST_64BIT_LONG=0
+BFD_HOST_64_BIT_DEFINED=0
+BFD_HOST_64_BIT=
+BFD_HOST_U_64_BIT=
+if test "x${HOST_64BIT_TYPE}" = "xlong"; then
+ BFD_HOST_64BIT_LONG=1
+elif test "x${HOST_64BIT_TYPE}" != "x"; then
+ BFD_HOST_64_BIT_DEFINED=1
+ BFD_HOST_64_BIT=${HOST_64BIT_TYPE}
+ BFD_HOST_U_64_BIT=${HOST_U_64BIT_TYPE}
fi
+AC_SUBST(BFD_HOST_64BIT_LONG)
+AC_SUBST(BFD_HOST_64_BIT_DEFINED)
+AC_SUBST(BFD_HOST_64_BIT)
+AC_SUBST(BFD_HOST_U_64_BIT)
+
+BFD_CC_FOR_BUILD
+
+AC_CHECK_HEADERS(stddef.h string.h strings.h stdlib.h time.h unistd.h)
+AC_CHECK_HEADERS(fcntl.h sys/file.h sys/time.h)
+AC_HEADER_TIME
+AC_CHECK_FUNCS(fcntl getpagesize setitimer sysconf fdopen)
+
+BFD_BINARY_FOPEN
+
+BFD_NEED_DECLARATION(strstr)
+BFD_NEED_DECLARATION(malloc)
+BFD_NEED_DECLARATION(realloc)
+BFD_NEED_DECLARATION(free)
+BFD_NEED_DECLARATION(getenv)
+
+# If we are configured native, pick a core file support file.
+COREFILE=
+COREFLAG=
+if test "${target}" = "${host}"; then
+ case "${host}" in
+ alpha*-*-linux*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/alphalinux.h")
+ ;;
+ alpha*-*-*) COREFILE=osf-core.lo ;;
+ arm-*-riscix) COREFILE=trad-core.lo ;;
+ hppa*-*-hpux*) COREFILE=hpux-core.lo ;;
+ hppa*-*-hiux*) COREFILE=hpux-core.lo ;;
+ hppa*-*-bsd*) COREFILE="hpux-core.lo hppabsd-core.lo"
+ COREFLAG="-DHPUX_CORE -DHPPABSD_CORE" ;;
+changequote(,)dnl
+ i[3456]86-sequent-bsd*)
+changequote([,])dnl
+ COREFILE=trad-core.lo;
+ AC_DEFINE(TRAD_HEADER,"hosts/symmetry.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-sequent-sysv4*) ;;
+ i[3456]86-sequent-sysv*)
+changequote([,])dnl
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/symmetry.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-*-bsd* | i[3456]86-*-freebsd*)
+changequote([,])dnl
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/i386bsd.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-*-netbsd* | i[3456]86-*-openbsd*)
+changequote([,])dnl
+ COREFILE=netbsd-core.lo
+ ;;
+changequote(,)dnl
+ i[3456]86-esix-sysv3*)
+changequote([,])dnl
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/esix.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-*-sco* | i[3456]86-*-isc*)
+changequote([,])dnl
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/i386sco.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-*-mach3*)
+changequote([,])dnl
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/i386mach3.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-*-linux*)
+changequote([,])dnl
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/i386linux.h")
+ ;;
+changequote(,)dnl
+ i[3456]86-*-isc*) COREFILE=trad-core.lo ;;
+ i[3456]86-*-aix*) COREFILE=aix386-core.lo ;;
+changequote([,])dnl
+ i860-*-mach3* | i860-*-osf1*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/i860mach3.h")
+ ;;
+ mips-dec-bsd*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/mipsbsd.h")
+ ;;
+ mips-dec-mach3*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/mipsmach3.h")
+ ;;
+ mips-*-netbsd* | mips*-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ mips-dec-*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/decstation.h")
+ ;;
+ mips-sgi-irix4*) COREFILE=irix-core.lo ;;
+ mips-sgi-irix5*) COREFILE=irix-core.lo ;;
+ mips-sgi-irix6*) COREFILE=irix-core.lo ;;
+ mips-*-mach3*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/mipsmach3.h")
+ ;;
+ mips-*-sysv4*) ;;
+ mips-*-sysv* | mips-*-riscos*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/riscos.h")
+ ;;
+ mips-sony-bsd*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/news-mips.h")
+ ;;
+ m68*-bull*-sysv*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/dpx2.h")
+ ;;
+ m68*-hp-hpux*) COREFILE=hpux-core.lo ;;
+ m68*-hp-bsd*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/hp300bsd.h")
+ ;;
+ m68*-*-linux*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/m68klinux.h")
+ ;;
+ m68*-motorola-sysv*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER, "hosts/delta68.h")
+ ;;
+ m68*-sony-*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/news.h")
+ ;;
+ m68*-*-netbsd* | m68*-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ m68*-apple-aux*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/m68kaux.h")
+ ;;
+ m88*-*-sysv4*) ;;
+ m88*-motorola-sysv*) COREFILE=ptrace-core.lo ;;
+ m88*-*-mach3*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/m88kmach3.h")
+ ;;
+ ns32k-pc532-mach)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/pc532mach.h")
+ ;;
+ ns32k-*-netbsd* | ns32k-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ rs6000-*-lynx*) COREFILE=lynx-core.lo ;;
+ rs6000-*-aix4*) COREFILE=rs6000-core.lo ;;
+ rs6000-*-*) COREFILE=rs6000-core.lo ;;
+ powerpc-*-*bsd*) COREFILE=netbsd-core.lo ;;
+ powerpc-*-aix4*) COREFILE=rs6000-core.lo ;;
+ powerpc-*-aix*) COREFILE=rs6000-core.lo ;;
+ powerpc-*-beos*) ;;
+ sparc-*-netbsd* | sparc-*-openbsd*)
+ COREFILE=netbsd-core.lo
+ ;;
+ tahoe-*-*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/tahoe.h")
+ ;;
+ vax-*-ultrix2*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/vaxult2.h")
+ ;;
+ vax-*-ultrix*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/vaxult2.h")
+ ;;
+ vax-*-*)
+ COREFILE=trad-core.lo
+ AC_DEFINE(TRAD_HEADER,"hosts/vaxbsd.h")
+ ;;
+ esac
+
+ case "$COREFILE" in
+ aix386-core.lo) COREFLAG=-DAIX386_CORE ;;
+ hppabsd-core.lo) COREFLAG=-DHPPABSD_CORE ;;
+ hpux-core.lo) COREFLAG=-DHPUX_CORE ;;
+ irix-core.lo) COREFLAG=-DIRIX_CORE ;;
+ lynx-core.lo) COREFLAG=-DLYNX_CORE ;;
+ osf-core.lo) COREFLAG=-DOSF_CORE ;;
+ ptrace-core.lo) COREFLAG=-DPTRACE_CORE ;;
+ rs6000-core.lo) COREFLAG="$COREFLAG -DAIX_CORE" ;;
+ trad-core.lo) COREFLAG="$COREFLAG -DTRAD_CORE" ;;
+ esac
+
+ # The ELF code uses the native <sys/procfs.h> to handle core files.
+ # Define HAVE_SYS_PROCFS_H if the file exists and defines
+ # prstatus_t.
+ AC_MSG_CHECKING([for sys/procfs.h])
+ AC_CACHE_VAL(bfd_cv_header_sys_procfs_h,
+ [AC_TRY_COMPILE([#include <sys/procfs.h>],
+ [prstatus_t t;],
+ bfd_cv_header_sys_procfs_h=yes, bfd_cv_header_sys_procfs_h=no)])
+ AC_MSG_RESULT($bfd_cv_header_sys_procfs_h)
+ if test $bfd_cv_header_sys_procfs_h = yes; then
+ AC_DEFINE(HAVE_SYS_PROCFS_H)
+ fi
-host_makefile_frag=
-if [ -f ${srcdir}/config/${my_host}.mh ] ; then
- host_makefile_frag=config/${my_host}.mh
fi
+AC_SUBST(COREFILE)
+AC_SUBST(COREFLAG)
-# per-target:
+# target stuff:
# Canonicalize the secondary target names.
-if [ -n "$with_targets" ]; then
- for targ in `echo $with_targets | sed 's/,/ /g'`
+if test -n "$enable_targets" ; then
+ for targ in `echo $enable_targets | sed 's/,/ /g'`
do
- result=`$configsub $targ 2>/dev/null`
- if [ -n "$result" ]; then
+ result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $targ 2>/dev/null`
+ if test -n "$result" ; then
canon_targets="$canon_targets $result"
else
# Allow targets that config.sub doesn't recognize, like "all".
fi
all_targets=false
-
+defvec=
+selvecs=
+selarchs=
+TDEFINES=
for targ in $target $canon_targets
do
- bfd_target=`$srcdir/config.bfd $targ`
-
- if [ "x$bfd_target" = "xall" ]; then
+ if test "x$targ" = "xall"; then
all_targets=true
else
- if [ ! -f ${srcdir}/config/${bfd_target}.mt ] ; then
- echo '***' No file ${srcdir}/config/${bfd_target}.mt 1>&2
- echo '***' BFD does not support target ${bfd_target} 1>&2
- echo '***' Look in bfd/config.bfd for supported targets 1>&2
- exit 1
- fi
-
- if [ "x$targ" = "x$target" ]; then
- target_makefile_frag=${srcdir}/config/${bfd_target}.mt
- else
- target_extra_frags="$target_extra_frags ${srcdir}/config/${bfd_target}.mt"
+ . $srcdir/config.bfd
+ if test "x$targ" = "x$target"; then
+ defvec=$targ_defvec
fi
+ selvecs="$selvecs $targ_defvec $targ_selvecs"
+ selarchs="$selarchs $targ_archs"
+ TDEFINES="$TDEFINES $targ_cflags"
fi
done
-
-# We don't do any links based on the target system, just makefile config.
-
-# post-target:
-
-rm -f Makefile.tmp Makefile.2
-mv Makefile Makefile.tmp
-
-case ${with_64_bit_bfd} in
- yes) want64=true ;;
- no | "") want64=false ;;
- *)
- echo "*** bad value \"${with_64_bit_bfd}\" for 64-bit-bfd flag; ignored" 1>&2
- ;;
-esac
+AC_SUBST(TDEFINES)
# This processing still needs to be done if we're to decide properly whether
# 64-bit support needs to be compiled in. Currently, it will be included if
# no "--with-64-bit-bfd" option is given, even if "--with-targets=all" is
# used.
-# The default vector in the primary target.
-DEFAULT_VECTOR=`sed -n '
-s/DEFAULT_VECTOR[ ]*=[ ]*\([^ ]*\)/\1/p
-' $target_makefile_frag`
-
-allfrags="$target_makefile_frag $target_extra_frags"
-
-# The default and selected vectors in all the configured targets.
-SELECT_VECS=`sed -n '
-s/DEFAULT_VECTOR[ ]*=[ ]*\([^ ]*\)/\1/p
-s/SELECT_VECS[ ]*=[ ]*\([^ ]*\)/\1/p
-' $allfrags`
-# uniq the list.
+# uniq the default and selected vectors in all the configured targets.
f=""
-for i in $SELECT_VECS ; do
+for i in $selvecs ; do
case " $f " in
*" $i "*) ;;
*) f="$f $i" ;;
esac
done
-SELECT_VECS="$f"
+selvecs="$f"
-# The architectures in all the configured targets.
-SELECT_ARCHITECTURES=`sed -n '
-s/SELECT_ARCHITECTURES[ ]*=[ ]*//p
-' $allfrags`
-# uniq the list.
+# uniq the architectures in all the configured targets.
f=""
-for i in $SELECT_ARCHITECTURES ; do
+for i in $selarchs ; do
case " $f " in
*" $i "*) ;;
*) f="$f $i" ;;
esac
done
-SELECT_ARCHITECTURES="$f"
+selarchs="$f"
# Target backend .o files.
tb=
-for vec in $SELECT_VECS
+elf="elf.lo elflink.lo"
+
+for vec in $selvecs
do
case "$vec" in
# This list is alphabetized to make it easy to compare
# with the two vector lists in targets.c.
- a29kcoff_big_vec) tb="$tb coff-a29k.o" ;;
- a_out_adobe_vec) tb="$tb aout-adobe.o aout32.o stab-syms.o" ;;
- aout_mips_big_vec) tb="$tb mipsbsd.o aout32.o stab-syms.o" ;;
- aout_mips_little_vec) tb="$tb mipsbsd.o aout32.o stab-syms.o" ;;
- apollocoff_vec) tb="$tb coff-apollo.o" ;;
- b_out_vec_big_host) tb="$tb bout.o aout32.o stab-syms.o" ;;
- b_out_vec_little_host) tb="$tb bout.o aout32.o stab-syms.o" ;;
- bfd_elf32_big_generic_vec) tb="$tb elf32-gen.o elf32.o elf.o" ;;
- bfd_elf32_bigmips_vec) tb="$tb elf32-mips.o elf32.o elf.o" ;;
- bfd_elf32_hppa_vec) tb="$tb elf32-hppa.o elf32.o elf.o" ;;
- bfd_elf32_i386_vec) tb="$tb elf32-i386.o elf32.o elf.o" ;;
- bfd_elf32_i860_vec) tb="$tb elf32-i860.o elf32.o elf.o" ;;
- bfd_elf32_little_generic_vec) tb="$tb elf32-gen.o elf32.o elf.o" ;;
- bfd_elf32_littlemips_vec) tb="$tb elf32-mips.o elf32.o elf.o" ;;
- bfd_elf32_m68k_vec) tb="$tb elf32-m68k.o elf32.o elf.o" ;;
- bfd_elf32_m88k_vec) tb="$tb elf32-m88k.o elf32.o elf.o" ;;
- bfd_elf32_sparc_vec) tb="$tb elf32-sparc.o elf32.o elf.o" ;;
- bfd_elf64_big_generic_vec) tb="$tb elf64-gen.o elf64.o elf.o"
+ a29kcoff_big_vec) tb="$tb coff-a29k.lo cofflink.lo" ;;
+ a_out_adobe_vec) tb="$tb aout-adobe.lo aout32.lo" ;;
+ armcoff_little_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
+ armcoff_big_vec) tb="$tb coff-arm.lo cofflink.lo " ;;
+ armpe_little_vec) tb="$tb pe-arm.lo cofflink.lo " ;;
+ armpe_big_vec) tb="$tb pe-arm.lo cofflink.lo " ;;
+ armpei_little_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
+ armpei_big_vec) tb="$tb pei-arm.lo cofflink.lo " ;;
+ aout0_big_vec) tb="$tb aout0.lo aout32.lo" ;;
+ aout_arm_big_vec) tb="$tb aout-arm.lo aout32.lo" ;;
+ aout_arm_little_vec) tb="$tb aout-arm.lo aout32.lo" ;;
+ aout_mips_big_vec) tb="$tb mipsbsd.lo aout32.lo" ;;
+ aout_mips_little_vec) tb="$tb mipsbsd.lo aout32.lo" ;;
+ apollocoff_vec) tb="$tb coff-apollo.lo" ;;
+ b_out_vec_big_host) tb="$tb bout.lo aout32.lo" ;;
+ b_out_vec_little_host) tb="$tb bout.lo aout32.lo" ;;
+ bfd_elf64_alpha_vec) tb="$tb elf64-alpha.lo elf64.lo $elf"
target64=true ;;
- bfd_elf64_little_generic_vec) tb="$tb elf64-gen.o elf64.o elf.o"
+# start-sanitize-arc
+ bfd_elf32_littlearc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
+ bfd_elf32_bigarc_vec) tb="$tb elf32-arc.lo elf32.lo $elf" ;;
+# end-sanitize-arc
+ bfd_elf32_big_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
+ bfd_elf32_bigmips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf64_bigmips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
target64=true ;;
-# start-sanitize-v9
- bfd_elf64_sparc_vec) tb="$tb elf64-sparc.o elf64.o elf.o"
+ bfd_elf32_d10v_vec) tb="$tb elf32-d10v.lo elf32.lo $elf" ;;
+# start-sanitize-d30v
+ bfd_elf32_d30v_vec) tb="$tb elf32-d30v.lo elf32.lo $elf" ;;
+# end-sanitize-d30v
+ bfd_elf32_hppa_vec) tb="$tb elf32-hppa.lo elf32.lo $elf" ;;
+ bfd_elf32_i386_vec) tb="$tb elf32-i386.lo elf32.lo $elf" ;;
+ bfd_elf32_i860_vec) tb="$tb elf32-i860.lo elf32.lo $elf" ;;
+ bfd_elf32_little_generic_vec) tb="$tb elf32-gen.lo elf32.lo $elf" ;;
+ bfd_elf32_littlemips_vec) tb="$tb elf32-mips.lo elf32.lo $elf ecofflink.lo" ;;
+ bfd_elf64_littlemips_vec) tb="$tb elf64-mips.lo elf64.lo elf32-mips.lo elf32.lo $elf ecofflink.lo"
target64=true ;;
-# end-sanitize-v9
- demo_64_vec) tb="$tb demo64.o aout64.o stab-syms.o"
+ bfd_elf32_m32r_vec) tb="$tb elf32-m32r.lo elf32.lo $elf" ;;
+ bfd_elf32_m68k_vec) tb="$tb elf32-m68k.lo elf32.lo $elf" ;;
+ bfd_elf32_m88k_vec) tb="$tb elf32-m88k.lo elf32.lo $elf" ;;
+ bfd_elf32_mn10200_vec) tb="$tb elf-m10200.lo elf32.lo $elf" ;;
+ bfd_elf32_mn10300_vec) tb="$tb elf-m10300.lo elf32.lo $elf" ;;
+ bfd_elf32_powerpc_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
+ bfd_elf32_powerpcle_vec) tb="$tb elf32-ppc.lo elf32.lo $elf" ;;
+ bfd_elf32_sh_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
+ bfd_elf32_shl_vec) tb="$tb elf32-sh.lo elf32.lo $elf coff-sh.lo" ;;
+ bfd_elf32_sparc_vec) tb="$tb elf32-sparc.lo elf32.lo $elf" ;;
+# start-sanitize-v850
+ bfd_elf32_v850_vec) tb="$tb elf32-v850.lo elf32.lo $elf" ;;
+# end-sanitize-v850
+ bfd_elf64_big_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"
target64=true ;;
- ecoff_big_vec) tb="$tb coff-mips.o" ;;
- ecoff_little_vec) tb="$tb coff-mips.o" ;;
- ecoffalpha_little_vec) tb="$tb coff-alpha.o" ;;
- h8300coff_vec) tb="$tb coff-h8300.o reloc16.o" ;;
- h8500coff_vec) tb="$tb coff-h8500.o reloc16.o" ;;
- host_aout_vec) tb="$tb host-aout.o aout32.o stab-syms.o" ;;
- hp300bsd_vec) tb="$tb hp300bsd.o aout32.o stab-syms.o" ;;
- hp300hpux_vec) tb="$tb hp300hpux.o aout32.o stab-syms.o" ;;
- som_vec) tb="$tb som.o" ;;
- i386aout_vec) tb="$tb i386aout.o aout32.o stab-syms.o" ;;
- i386bsd_vec) tb="$tb i386bsd.o aout32.o stab-syms.o" ;;
- netbsd386_vec) tb="$tb netbsd386.o aout32.o stab-syms.o" ;;
- i386coff_vec) tb="$tb coff-i386.o" ;;
- i386linux_vec) tb="$tb i386linux.o aout32.o stab-syms.o" ;;
- i386lynx_aout_vec) tb="$tb i386lynx.o lynx-core.o aout32.o stab-syms.o" ;;
- i386lynx_coff_vec) tb="$tb i386lynx-cf.o lynx-core.o stab-syms.o" ;;
- i386mach3_vec) tb="$tb i386mach3.o" ;;
- icoff_big_vec) tb="$tb coff-i960.o" ;;
- icoff_little_vec) tb="$tb coff-i960.o" ;;
- ieee_vec) tb="$tb ieee.o" ;;
- m68kcoff_vec) tb="$tb coff-m68k.o" ;;
- m68kcoffun_vec) tb="$tb coff-u68k.o coff-m68k.o" ;;
- m68klynx_aout_vec) tb="$tb m68klynx.o lynx-core.o aout32.o stab-syms.o" ;;
- m68klynx_coff_vec) tb="$tb m68klynx-cf.o coff-m68k.o lynx-core.o stab-syms.o" ;;
- m88kbcs_vec) tb="$tb coff-m88k.o" ;;
- newsos3_vec) tb="$tb newsos3.o aout32.o stab-syms.o" ;;
- nlm32_big_generic_vec) tb="$tb nlm32-gen.o nlm32.o nlm.o" ;;
- nlm32_i386_vec) tb="$tb nlm32-i386.o nlm32.o nlm.o" ;;
- nlm32_little_generic_vec) tb="$tb nlm32-gen.o nlm32.o nlm.o" ;;
- nlm64_big_generic_vec) tb="$tb nlm64-gen.o nlm64.o nlm.o"
+ bfd_elf64_little_generic_vec) tb="$tb elf64-gen.lo elf64.lo $elf"
target64=true ;;
- nlm64_little_generic_vec) tb="$tb nlm64-gen.o nlm64.o nlm.o"
+ bfd_elf64_sparc_vec) tb="$tb elf64-sparc.lo elf64.lo $elf"
target64=true ;;
- rs6000coff_vec) tb="$tb coff-rs6000.o" ;;
- shcoff_vec) tb="$tb coff-sh.o reloc16.o" ;;
- sunos_big_vec) tb="$tb sunos.o aout32.o stab-syms.o" ;;
- tekhex_vec) tb="$tb tekhex.o" ;;
- we32kcoff_vec) tb="$tb coff-we32k.o" ;;
- z8kcoff_vec) tb="$tb coff-z8k.o reloc16.o" ;;
-
- srec_vec) tb="$tb srec.o" ;;
- symbolsrec_vec) tb="$tb srec.o" ;;
+ cisco_core_vec) tb="$tb cisco-core.lo" ;;
+ demo_64_vec) tb="$tb demo64.lo aout64.lo"
+ target64=true ;;
+ ecoff_big_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
+ ecoff_little_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
+ ecoff_biglittle_vec) tb="$tb coff-mips.lo ecoff.lo ecofflink.lo" ;;
+ ecoffalpha_little_vec) tb="$tb coff-alpha.lo ecoff.lo ecofflink.lo"
+ target64=true ;;
+ go32coff_vec) tb="$tb coff-go32.lo cofflink.lo" ;;
+ go32stubbedcoff_vec) tb="$tb coff-stubgo32.lo cofflink.lo" ;;
+ evax_alpha_vec) tb="$tb evax-alpha.lo evax-emh.lo evax-egsd.lo evax-etir.lo evax-misc.lo"
+ target64=true ;;
+ h8300coff_vec) tb="$tb coff-h8300.lo reloc16.lo" ;;
+ h8500coff_vec) tb="$tb coff-h8500.lo reloc16.lo" ;;
+ host_aout_vec) tb="$tb host-aout.lo aout32.lo" ;;
+ hp300bsd_vec) tb="$tb hp300bsd.lo aout32.lo" ;;
+ hp300hpux_vec) tb="$tb hp300hpux.lo aout32.lo" ;;
+ i386aout_vec) tb="$tb i386aout.lo aout32.lo" ;;
+ i386bsd_vec) tb="$tb i386bsd.lo aout32.lo" ;;
+ i386coff_vec) tb="$tb coff-i386.lo cofflink.lo" ;;
+ i386dynix_vec) tb="$tb i386dynix.lo aout32.lo" ;;
+ i386freebsd_vec) tb="$tb i386freebsd.lo aout32.lo" ;;
+ i386msdos_vec) tb="$tb i386msdos.lo" ;;
+ i386pe_vec) tb="$tb pe-i386.lo cofflink.lo " ;;
+ i386pei_vec) tb="$tb pei-i386.lo cofflink.lo" ;;
+ i386linux_vec) tb="$tb i386linux.lo aout32.lo" ;;
+ i386lynx_aout_vec) tb="$tb i386lynx.lo lynx-core.lo aout32.lo" ;;
+ i386lynx_coff_vec) tb="$tb cf-i386lynx.lo cofflink.lo lynx-core.lo" ;;
+ i386mach3_vec) tb="$tb i386mach3.lo aout32.lo" ;;
+ i386netbsd_vec) tb="$tb i386netbsd.lo aout32.lo" ;;
+ i386os9k_vec) tb="$tb i386os9k.lo aout32.lo" ;;
+ i860coff_vec) tb="$tb coff-i860.lo cofflink.lo" ;;
+ icoff_big_vec) tb="$tb coff-i960.lo cofflink.lo" ;;
+ icoff_little_vec) tb="$tb coff-i960.lo cofflink.lo" ;;
+ ieee_vec) tb="$tb ieee.lo" ;;
+ m68kcoff_vec) tb="$tb coff-m68k.lo cofflink.lo" ;;
+ m68kcoffun_vec) tb="$tb coff-u68k.lo coff-m68k.lo cofflink.lo" ;;
+ m68klinux_vec) tb="$tb m68klinux.lo aout32.lo" ;;
+ m68klynx_aout_vec) tb="$tb m68klynx.lo lynx-core.lo aout32.lo" ;;
+ m68klynx_coff_vec) tb="$tb cf-m68klynx.lo coff-m68k.lo cofflink.lo lynx-core.lo" ;;
+ m68knetbsd_vec) tb="$tb m68knetbsd.lo aout32.lo" ;;
+ m68k4knetbsd_vec) tb="$tb m68k4knetbsd.lo aout32.lo" ;;
+ m68kaux_coff_vec) tb="$tb coff-aux.lo coff-m68k.lo cofflink.lo" ;;
+ m68ksysvcoff_vec) tb="$tb coff-svm68k.lo cofflink.lo" ;;
+ m88kbcs_vec) tb="$tb coff-m88k.lo" ;;
+ newsos3_vec) tb="$tb newsos3.lo aout32.lo" ;;
+ nlm32_i386_vec) tb="$tb nlm32-i386.lo nlm32.lo nlm.lo" ;;
+ nlm32_sparc_vec) tb="$tb nlm32-sparc.lo nlm32.lo nlm.lo" ;;
+ nlm32_alpha_vec) tb="$tb nlm32-alpha.lo nlm32.lo nlm.lo"
+ target64=true ;;
+ riscix_vec) tb="$tb aout32.lo riscix.lo" ;;
+ nlm32_powerpc_vec) tb="$tb nlm32-ppc.lo nlm32.lo nlm.lo" ;;
+ pc532netbsd_vec) tb="$tb ns32knetbsd.lo aout-ns32k.lo" ;;
+ pc532machaout_vec) tb="$tb pc532-mach.lo aout-ns32k.lo" ;;
+ pmac_xcoff_vec) tb="$tb coff-pmac.lo xcofflink.lo" ;;
+ rs6000coff_vec) tb="$tb coff-rs6000.lo xcofflink.lo" ;;
+ bfd_powerpc_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
+ bfd_powerpcle_pe_vec) tb="$tb pe-ppc.lo cofflink.lo" ;;
+ bfd_powerpc_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
+ bfd_powerpcle_pei_vec) tb="$tb pei-ppc.lo cofflink.lo" ;;
+ ppcboot_vec) tb="$tb ppcboot.lo" ;;
+ shcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ shlcoff_vec) tb="$tb coff-sh.lo cofflink.lo" ;;
+ som_vec) tb="$tb som.lo" ;;
+ sparcle_aout_vec) tb="$tb aout-sparcle.lo aout32.lo" ;;
+ sparclinux_vec) tb="$tb sparclinux.lo aout32.lo stab-syms.lo" ;;
+ sparclynx_aout_vec) tb="$tb sparclynx.lo lynx-core.lo aout32.lo" ;;
+ sparclynx_coff_vec) tb="$tb cf-sparclynx.lo lynx-core.lo" ;;
+ sparcnetbsd_vec) tb="$tb sparcnetbsd.lo aout32.lo" ;;
+ sparccoff_vec) tb="$tb coff-sparc.lo" ;;
+ srec_vec) tb="$tb srec.lo" ;;
+ sunos_big_vec) tb="$tb sunos.lo aout32.lo" ;;
+ symbolsrec_vec) tb="$tb srec.lo" ;;
+ tekhex_vec) tb="$tb tekhex.lo" ;;
+# start-sanitize-tic80
+ tic80coff_vec) tb="$tb coff-tic80.lo cofflink.lo" ;;
+# end-sanitize-tic80
+ we32kcoff_vec) tb="$tb coff-we32k.lo" ;;
+ z8kcoff_vec) tb="$tb coff-z8k.lo reloc16.lo" ;;
+ w65_vec) tb="$tb coff-w65.lo reloc16.lo" ;;
+ versados_vec) tb="$tb versados.lo" ;;
"") ;;
- *) echo "*** unknown target vector $vec" 1>&2; exit 1 ;;
+ *) AC_MSG_ERROR(*** unknown target vector $vec) ;;
esac
done
# Target architecture .o files.
-ta=`echo $SELECT_ARCHITECTURES | sed -e s/bfd_/cpu-/g -e s/_arch/.o/g`
+# A couple of CPUs use shorter file names to avoid problems on DOS
+# filesystems.
+ta=`echo $selarchs | sed -e s/bfd_/cpu-/g -e s/_arch/.lo/g -e s/mn10200/m10200/ -e s/mn10300/m10300/`
# Weed out duplicate .o files.
f=""
bfd_backends="$tb"
bfd_machines="$ta"
-if [ x${all_targets} = xtrue ]; then
+if test x${all_targets} = xtrue ; then
bfd_backends="${bfd_backends}"' $(ALL_BACKENDS)'
bfd_machines="${bfd_machines}"' $(ALL_MACHINES)'
+ selvecs=
+ havevecs=
+ selarchs=
else # all_targets is true
# Only set these if they will be nonempty, for the clever echo.
- test -n "$SELECT_VECS" &&
- selvecs=`echo $SELECT_VECS | sed -e 's/^/\&/' -e 's/ \(.\)/,\&\1/g'`
- test -n "SELECT_ARCHITECTURES" &&
- selarchs=`echo $SELECT_ARCHITECTURES | sed -e 's/ \(.\)/,\1/g'`
+ havevecs=
+ test -n "$selvecs" &&
+ havevecs=`echo $selvecs | sed -e 's/^/-DHAVE_/' -e 's/ \(.\)/ -DHAVE_\1/g'`
+ test -n "$selvecs" &&
+ selvecs=`echo $selvecs | sed -e 's/^/\&/' -e 's/ \(.\)/,\&\1/g'`
+ test -n "$selarchs" &&
+ selarchs=`echo $selarchs | sed -e 's/^/\&/' -e 's/ \(.\)/,\&\1/g'`
fi # all_targets is true
case ${host64}-${target64}-${want64} in
*true*)
wordsize=64
all_backends='$(BFD64_BACKENDS) $(BFD32_BACKENDS)'
+ if test -z "$GCC" && test "$BFD_HOST_64BIT_LONG" = "0" && test "$BFD_HOST_64_BIT_DEFINED" = "0"; then
+ AC_MSG_WARN([You have requested a 64 bit BFD configuration, but])
+ AC_MSG_WARN([your compiler may not have a 64 bit integral type])
+ fi
;;
false-false-false)
wordsize=32
;;
esac
-echo WORDSIZE=${wordsize} >> Makefile.2
-echo ALL_BACKENDS=${all_backends} >> Makefile.2
-echo BFD_BACKENDS=${bfd_backends} >> Makefile.2
-echo BFD_MACHINES=${bfd_machines} >> Makefile.2
-
-test -n "$DEFAULT_VECTOR" && defvec="$DEFAULT_VECTOR"
-
-echo "TDEFAULTS = \
-${defvec+-DDEFAULT_VECTOR=$defvec} \
-${selvecs+-DSELECT_VECS='$selvecs'} \
-${selarchs+-DSELECT_ARCHITECTURES='$selarchs'}" \
- >> Makefile.2
+AC_SUBST(wordsize)
+AC_SUBST(all_backends)
+AC_SUBST(bfd_backends)
+AC_SUBST(bfd_machines)
+
+tdefaults=""
+test -n "${defvec}" && tdefaults="${tdefaults} -DDEFAULT_VECTOR=${defvec}"
+test -n "${selvecs}" && tdefaults="${tdefaults} -DSELECT_VECS='${selvecs}'"
+test -n "${selarchs}" && tdefaults="${tdefaults} -DSELECT_ARCHITECTURES='${selarchs}'"
+test -n "${havevecs}" && tdefaults="${tdefaults} ${havevecs}"
+AC_SUBST(tdefaults)
+
+dnl AC_CHECK_HEADERS(sys/mman.h)
+AC_FUNC_MMAP
+AC_CHECK_FUNCS(madvise mprotect)
+case ${want_mmap}+${ac_cv_func_mmap_fixed_mapped} in
+ true+yes ) AC_DEFINE(USE_MMAP) ;;
+esac
-cat Makefile.tmp >> Makefile.2
-rm -f Makefile.tmp
-mv Makefile.2 Makefile
+rm -f doc/config.status
+AC_OUTPUT(Makefile doc/Makefile bfd-in3.h:bfd-in2.h)