/* BFD support for the ns32k architecture.
- Copyright 1990, 1991, 1994, 1995, 1998, 2000, 2001, 2002
- Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1994, 1995, 1998, 1999, 2000, 2001, 2002, 2003,
+ 2004, 2005, 2007, 2012 Free Software Foundation, Inc.
Almost totally rewritten by Ian Dall from initial work
by Andrew Cagney.
-This file is part of BFD, the Binary File Descriptor library.
+ This file is part of BFD, the Binary File Descriptor library.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
-#include "bfd.h"
#include "sysdep.h"
+#include "bfd.h"
#include "libbfd.h"
#include "ns32k.h"
#define N(machine, printable, d, next) \
-{ 32, 32, 8, bfd_arch_ns32k, machine, "ns32k",printable,3,d,bfd_default_compatible,bfd_default_scan, next, }
+{ 32, 32, 8, bfd_arch_ns32k, machine, "ns32k",printable,3,d, \
+ bfd_default_compatible,bfd_default_scan,bfd_arch_default_fill,next, }
static const bfd_arch_info_type arch_info_struct[] =
{
- N(32532,"ns32k:32532",true, 0), /* the word ns32k will match this too */
+ N(32532,"ns32k:32532",TRUE, 0), /* The word ns32k will match this too. */
};
const bfd_arch_info_type bfd_ns32k_arch =
- N(32032,"ns32k:32032",false, &arch_info_struct[0]);
-
-static bfd_reloc_status_type do_ns32k_reloc
- PARAMS ((bfd *, arelent *, struct symbol_cache_entry *, PTR, asection *,
- bfd *, char **,
- bfd_vma (*) (bfd_byte *, int),
- int (*) (bfd_vma, bfd_byte *, int)));
+ N(32032,"ns32k:32032",FALSE, &arch_info_struct[0]);
bfd_vma
-_bfd_ns32k_get_displacement (buffer, size)
- bfd_byte *buffer;
- int size;
+_bfd_ns32k_get_displacement (bfd_byte *buffer, int size)
{
bfd_signed_vma value;
+
switch (size)
{
case 1:
abort ();
return 0;
}
+
return value;
}
-int
-_bfd_ns32k_put_displacement (value, buffer, size)
- bfd_vma value;
- bfd_byte *buffer;
- int size;
+void
+_bfd_ns32k_put_displacement (bfd_vma value, bfd_byte *buffer, int size)
{
switch (size)
{
case 1:
- if (value + 0x40 > 0x7f)
- return -1;
value &= 0x7f;
*buffer++ = value;
break;
case 2:
- if (value + 0x2000 > 0x3fff)
- return -1;
value &= 0x3fff;
value |= 0x8000;
*buffer++ = (value >> 8);
break;
case 4:
- /* FIXME: is this correct? -0x1f000000 <= value < 0x2000000 */
- if (value + 0x1f000000 > 0x3effffff)
- return -1;
value |= (bfd_vma) 0xc0000000;
*buffer++ = (value >> 24);
*buffer++ = (value >> 16);
*buffer++ = (value >> 8);
*buffer++ = value;
break;
- default:
- return -1;
}
- return 0;
+ return;
}
bfd_vma
-_bfd_ns32k_get_immediate (buffer, size)
- bfd_byte *buffer;
- int size;
+_bfd_ns32k_get_immediate (bfd_byte *buffer, int size)
{
bfd_vma value = 0;
+
switch (size)
{
- case 8:
- value = (value << 8) | (*buffer++ & 0xff);
- value = (value << 8) | (*buffer++ & 0xff);
- value = (value << 8) | (*buffer++ & 0xff);
- value = (value << 8) | (*buffer++ & 0xff);
case 4:
value = (value << 8) | (*buffer++ & 0xff);
value = (value << 8) | (*buffer++ & 0xff);
value = (value << 8) | (*buffer++ & 0xff);
case 1:
value = (value << 8) | (*buffer++ & 0xff);
+ break;
+ default:
+ abort ();
}
return value;
}
-int
-_bfd_ns32k_put_immediate (value, buffer, size)
- bfd_vma value;
- bfd_byte *buffer;
- int size;
+void
+_bfd_ns32k_put_immediate (bfd_vma value, bfd_byte *buffer, int size)
{
buffer += size - 1;
switch (size)
{
- case 8:
- *buffer-- = (value & 0xff); value >>= 8;
- *buffer-- = (value & 0xff); value >>= 8;
- *buffer-- = (value & 0xff); value >>= 8;
- *buffer-- = (value & 0xff); value >>= 8;
case 4:
*buffer-- = (value & 0xff); value >>= 8;
*buffer-- = (value & 0xff); value >>= 8;
case 1:
*buffer-- = (value & 0xff); value >>= 8;
}
- return 0;
}
/* This is just like the standard perform_relocation except we
- * use get_data and put_data which know about the ns32k
- * storage methods.
- * This is probably a lot more complicated than it needs to be!
- */
+ use get_data and put_data which know about the ns32k storage
+ methods. This is probably a lot more complicated than it
+ needs to be! */
+
static bfd_reloc_status_type
-do_ns32k_reloc (abfd, reloc_entry, symbol, data, input_section, output_bfd,
- error_message, get_data, put_data)
- bfd *abfd;
- arelent *reloc_entry;
- struct symbol_cache_entry *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message ATTRIBUTE_UNUSED;
- bfd_vma (*get_data) PARAMS ((bfd_byte *, int));
- int (*put_data) PARAMS ((bfd_vma, bfd_byte *, int));
+do_ns32k_reloc (bfd * abfd,
+ arelent * reloc_entry,
+ struct bfd_symbol * symbol,
+ void * data,
+ asection * input_section,
+ bfd * output_bfd,
+ char ** error_message ATTRIBUTE_UNUSED,
+ bfd_vma (* get_data) (bfd_byte *, int),
+ void (* put_data) (bfd_vma, bfd_byte *, int))
{
int overflow = 0;
bfd_vma relocation;
asection *reloc_target_output_section;
bfd_byte *location;
- if ((symbol->section == &bfd_abs_section)
+ if (bfd_is_abs_section (symbol->section)
&& output_bfd != (bfd *) NULL)
{
reloc_entry->address += input_section->output_offset;
return bfd_reloc_ok;
}
- /* If we are not producing relocateable output, return an error if
+ /* If we are not producing relocatable output, return an error if
the symbol is not defined. An undefined weak symbol is
considered to have a value of zero (SVR4 ABI, p. 4-27). */
- if (symbol->section == &bfd_und_section
+ if (bfd_is_und_section (symbol->section)
&& (symbol->flags & BSF_WEAK) == 0
&& output_bfd == (bfd *) NULL)
flag = bfd_reloc_undefined;
/* Is the address of the relocation really within the section? */
- if (reloc_entry->address > input_section->_cooked_size)
+ if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
return bfd_reloc_outofrange;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
of the location within the section. Some targets arrange for
the addend to be the negative of the position of the location
within the section; for example, i386-aout does this. For
- i386-aout, pcrel_offset is false. Some other targets do not
+ i386-aout, pcrel_offset is FALSE. Some other targets do not
include the position of the location; for example, m88kbcs,
- or ELF. For those targets, pcrel_offset is true.
+ or ELF. For those targets, pcrel_offset is TRUE.
- If we are producing relocateable output, then we must ensure
+ If we are producing relocatable output, then we must ensure
that this reloc will be correctly computed when the final
- relocation is done. If pcrel_offset is false we want to wind
+ relocation is done. If pcrel_offset is FALSE we want to wind
up with the negative of the location within the section,
which means we must adjust the existing addend by the change
- in the location within the section. If pcrel_offset is true
+ in the location within the section. If pcrel_offset is TRUE
we do not want to adjust the existing addend at all.
FIXME: This seems logical to me, but for the case of
- producing relocateable output it is not what the code
+ producing relocatable output it is not what the code
actually does. I don't want to change it, because it seems
far too likely that something will break. */
-
relocation -=
input_section->output_section->vma + input_section->output_offset;
/* WTF?? */
if (abfd->xvec->flavour == bfd_target_coff_flavour)
{
-#if 1
/* For m68k-coff, the addend was being subtracted twice during
relocation with -r. Removing the line below this comment
fixes that problem; see PR 2953.
-However, Ian wrote the following, regarding removing the line below,
-which explains why it is still enabled: --djm
-
-If you put a patch like that into BFD you need to check all the COFF
-linkers. I am fairly certain that patch will break coff-i386 (e.g.,
-SCO); see coff_i386_reloc in coff-i386.c where I worked around the
-problem in a different way. There may very well be a reason that the
-code works as it does.
-
-Hmmm. The first obvious point is that bfd_perform_relocation should
-not have any tests that depend upon the flavour. It's seem like
-entirely the wrong place for such a thing. The second obvious point
-is that the current code ignores the reloc addend when producing
-relocateable output for COFF. That's peculiar. In fact, I really
-have no idea what the point of the line you want to remove is.
-
-A typical COFF reloc subtracts the old value of the symbol and adds in
-the new value to the location in the object file (if it's a pc
-relative reloc it adds the difference between the symbol value and the
-location). When relocating we need to preserve that property.
-
-BFD handles this by setting the addend to the negative of the old
-value of the symbol. Unfortunately it handles common symbols in a
-non-standard way (it doesn't subtract the old value) but that's a
-different story (we can't change it without losing backward
-compatibility with old object files) (coff-i386 does subtract the old
-value, to be compatible with existing coff-i386 targets, like SCO).
-
-So everything works fine when not producing relocateable output. When
-we are producing relocateable output, logically we should do exactly
-what we do when not producing relocateable output. Therefore, your
-patch is correct. In fact, it should probably always just set
-reloc_entry->addend to 0 for all cases, since it is, in fact, going to
-add the value into the object file. This won't hurt the COFF code,
-which doesn't use the addend; I'm not sure what it will do to other
-formats (the thing to check for would be whether any formats both use
-the addend and set partial_inplace).
-
-When I wanted to make coff-i386 produce relocateable output, I ran
-into the problem that you are running into: I wanted to remove that
-line. Rather than risk it, I made the coff-i386 relocs use a special
-function; it's coff_i386_reloc in coff-i386.c. The function
-specifically adds the addend field into the object file, knowing that
-bfd_perform_relocation is not going to. If you remove that line, then
-coff-i386.c will wind up adding the addend field in twice. It's
-trivial to fix; it just needs to be done.
-
-The problem with removing the line is just that it may break some
-working code. With BFD it's hard to be sure of anything. The right
-way to deal with this is simply to build and test at least all the
-supported COFF targets. It should be straightforward if time and disk
-space consuming. For each target:
- 1) build the linker
- 2) generate some executable, and link it using -r (I would
- probably use paranoia.o and link against newlib/libc.a, which
- for all the supported targets would be available in
- /usr/cygnus/progressive/H-host/target/lib/libc.a).
- 3) make the change to reloc.c
- 4) rebuild the linker
- 5) repeat step 2
- 6) if the resulting object files are the same, you have at least
- made it no worse
- 7) if they are different you have to figure out which version is
- right
-*/
+ However, Ian wrote the following, regarding removing the line
+ below, which explains why it is still enabled: --djm
+
+ If you put a patch like that into BFD you need to check all
+ the COFF linkers. I am fairly certain that patch will break
+ coff-i386 (e.g., SCO); see coff_i386_reloc in coff-i386.c
+ where I worked around the problem in a different way. There
+ may very well be a reason that the code works as it does.
+
+ Hmmm. The first obvious point is that bfd_perform_relocation
+ should not have any tests that depend upon the flavour. It's
+ seem like entirely the wrong place for such a thing. The
+ second obvious point is that the current code ignores the
+ reloc addend when producing relocatable output for COFF.
+ That's peculiar. In fact, I really have no idea what the
+ point of the line you want to remove is.
+
+ A typical COFF reloc subtracts the old value of the symbol
+ and adds in the new value to the location in the object file
+ (if it's a pc relative reloc it adds the difference between
+ the symbol value and the location). When relocating we need
+ to preserve that property.
+
+ BFD handles this by setting the addend to the negative of the
+ old value of the symbol. Unfortunately it handles common
+ symbols in a non-standard way (it doesn't subtract the old
+ value) but that's a different story (we can't change it
+ without losing backward compatibility with old object files)
+ (coff-i386 does subtract the old value, to be compatible with
+ existing coff-i386 targets, like SCO).
+
+ So everything works fine when not producing relocatable
+ output. When we are producing relocatable output, logically
+ we should do exactly what we do when not producing
+ relocatable output. Therefore, your patch is correct. In
+ fact, it should probably always just set reloc_entry->addend
+ to 0 for all cases, since it is, in fact, going to add the
+ value into the object file. This won't hurt the COFF code,
+ which doesn't use the addend; I'm not sure what it will do
+ to other formats (the thing to check for would be whether
+ any formats both use the addend and set partial_inplace).
+
+ When I wanted to make coff-i386 produce relocatable output,
+ I ran into the problem that you are running into: I wanted
+ to remove that line. Rather than risk it, I made the
+ coff-i386 relocs use a special function; it's coff_i386_reloc
+ in coff-i386.c. The function specifically adds the addend
+ field into the object file, knowing that bfd_perform_relocation
+ is not going to. If you remove that line, then coff-i386.c
+ will wind up adding the addend field in twice. It's trivial
+ to fix; it just needs to be done.
+
+ The problem with removing the line is just that it may break
+ some working code. With BFD it's hard to be sure of anything.
+ The right way to deal with this is simply to build and test at
+ least all the supported COFF targets. It should be
+ straightforward if time and disk space consuming. For each
+ target:
+ 1) build the linker
+ 2) generate some executable, and link it using -r (I would
+ probably use paranoia.o and link against newlib/libc.a,
+ which for all the supported targets would be available in
+ /usr/cygnus/progressive/H-host/target/lib/libc.a).
+ 3) make the change to reloc.c
+ 4) rebuild the linker
+ 5) repeat step 2
+ 6) if the resulting object files are the same, you have at
+ least made it no worse
+ 7) if they are different you have to figure out which
+ version is right. */
relocation -= reloc_entry->addend;
-#endif
reloc_entry->addend = 0;
}
else
}
}
- /*
- Either we are relocating all the way, or we don't want to apply
- the relocation to the reloc entry (probably because there isn't
- any room in the output format to describe addends to relocs)
- */
+ /* Either we are relocating all the way, or we don't want to apply
+ the relocation to the reloc entry (probably because there isn't
+ any room in the output format to describe addends to relocs). */
/* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
(OSF version 1.3, compiler version 3.11). It miscompiles the
relocation >>= (bfd_vma) howto->rightshift;
- /* Shift everything up to where it's going to be used */
-
+ /* Shift everything up to where it's going to be used. */
relocation <<= (bfd_vma) howto->bitpos;
- /* Wait for the day when all have the mask in them */
+ /* Wait for the day when all have the mask in them. */
/* What we do:
i instruction to be left alone
B B B B B
or A A A A A
-----------------------
- R R R R R R R R R R put into bfd_put<size>
- */
+ R R R R R R R R R R put into bfd_put<size>. */
#define DOIT(x) \
x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
{
case 0:
{
- char x = get_data (location, 1);
+ bfd_vma x = get_data (location, 1);
DOIT (x);
- overflow = put_data ((bfd_vma) x, location, 1);
+ put_data ((bfd_vma) x, location, 1);
}
break;
case 1:
if (relocation)
{
- short x = get_data (location, 2);
+ bfd_vma x = get_data (location, 2);
DOIT (x);
- overflow = put_data ((bfd_vma) x, location, 2);
+ put_data ((bfd_vma) x, location, 2);
}
break;
case 2:
if (relocation)
{
- long x = get_data (location, 4);
+ bfd_vma x = get_data (location, 4);
DOIT (x);
- overflow = put_data ((bfd_vma) x, location, 4);
+ put_data ((bfd_vma) x, location, 4);
}
break;
case -2:
{
- long x = get_data (location, 4);
+ bfd_vma x = get_data (location, 4);
relocation = -relocation;
DOIT(x);
- overflow = put_data ((bfd_vma) x, location, 4);
+ put_data ((bfd_vma) x, location, 4);
}
break;
case 3:
- /* Do nothing */
+ /* Do nothing. */
break;
case 4:
{
bfd_vma x = get_data (location, 8);
DOIT (x);
- overflow = put_data (x, location, 8);
+ put_data (x, location, 8);
}
#else
abort ();
/* Relocate a given location using a given value and howto. */
bfd_reloc_status_type
-_bfd_do_ns32k_reloc_contents (howto, input_bfd, relocation, location,
- get_data, put_data)
- reloc_howto_type *howto;
- bfd *input_bfd ATTRIBUTE_UNUSED;
- bfd_vma relocation;
- bfd_byte *location;
- bfd_vma (*get_data) PARAMS ((bfd_byte *, int));
- int (*put_data) PARAMS ((bfd_vma, bfd_byte *, int));
+_bfd_do_ns32k_reloc_contents (reloc_howto_type *howto,
+ bfd *input_bfd ATTRIBUTE_UNUSED,
+ bfd_vma relocation,
+ bfd_byte *location,
+ bfd_vma (*get_data) (bfd_byte *, int),
+ void (*put_data) (bfd_vma, bfd_byte *, int))
{
int size;
bfd_vma x;
- boolean overflow;
+ bfd_boolean overflow;
/* If the size is negative, negate RELOCATION. This isn't very
general. */
which we don't check for. We must either check at every single
operation, which would be tedious, or we must do the computations
in a type larger than bfd_vma, which would be inefficient. */
- overflow = false;
+ overflow = FALSE;
if (howto->complain_on_overflow != complain_overflow_dont)
{
bfd_vma check;
/* For the signed case we use ADD, rather than SIGNED_ADD,
to avoid warnings from SVR4 cc. This is OK since we
- explictly handle the sign bits. */
+ explicitly handle the sign bits. */
if (signed_add >= 0)
signed_check += add >> howto->bitpos;
else
if (signed_check > reloc_signed_max
|| signed_check < reloc_signed_min)
- overflow = true;
+ overflow = TRUE;
}
break;
case complain_overflow_unsigned:
(((1 << (howto->bitsize - 1)) - 1) << 1) | 1;
if (check > reloc_unsigned_max)
- overflow = true;
+ overflow = TRUE;
}
break;
case complain_overflow_bitfield:
if ((check & ~reloc_bits) != 0
&& (((bfd_vma) signed_check & ~reloc_bits)
!= (-(bfd_vma) 1 & ~reloc_bits)))
- overflow = true;
+ overflow = TRUE;
}
break;
default:
}
bfd_reloc_status_type
-_bfd_ns32k_reloc_disp (abfd, reloc_entry, symbol, data, input_section,
- output_bfd, error_message)
- bfd *abfd;
- arelent *reloc_entry;
- struct symbol_cache_entry *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+_bfd_ns32k_reloc_disp (bfd *abfd,
+ arelent *reloc_entry,
+ struct bfd_symbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message)
{
return do_ns32k_reloc (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message,
}
bfd_reloc_status_type
-_bfd_ns32k_reloc_imm (abfd, reloc_entry, symbol, data, input_section,
- output_bfd, error_message)
- bfd *abfd;
- arelent *reloc_entry;
- struct symbol_cache_entry *symbol;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+_bfd_ns32k_reloc_imm (bfd *abfd,
+ arelent *reloc_entry,
+ struct bfd_symbol *symbol,
+ void * data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message)
{
return do_ns32k_reloc (abfd, reloc_entry, symbol, data, input_section,
output_bfd, error_message, _bfd_ns32k_get_immediate,
}
bfd_reloc_status_type
-_bfd_ns32k_final_link_relocate (howto, input_bfd, input_section, contents,
- address, value, addend)
- reloc_howto_type *howto;
- bfd *input_bfd;
- asection *input_section;
- bfd_byte *contents;
- bfd_vma address;
- bfd_vma value;
- bfd_vma addend;
+_bfd_ns32k_final_link_relocate (reloc_howto_type *howto,
+ bfd *input_bfd,
+ asection *input_section,
+ bfd_byte *contents,
+ bfd_vma address,
+ bfd_vma value,
+ bfd_vma addend)
{
bfd_vma relocation;
/* Sanity check the address. */
- if (address > input_section->_cooked_size)
+ if (address > bfd_get_section_limit (input_bfd, input_section))
return bfd_reloc_outofrange;
/* This function assumes that we are dealing with a basic relocation
location we are relocating. Some targets (e.g., i386-aout)
arrange for the contents of the section to be the negative of the
offset of the location within the section; for such targets
- pcrel_offset is false. Other targets (e.g., m88kbcs or ELF)
+ pcrel_offset is FALSE. Other targets (e.g., m88kbcs or ELF)
simply leave the contents of the section as zero; for such
- targets pcrel_offset is true. If pcrel_offset is false we do not
+ targets pcrel_offset is TRUE. If pcrel_offset is FALSE we do not
need to subtract out the offset of the location within the
section (which is just ADDRESS). */
if (howto->pc_relative)