* dwarf2read.c (follow_die_ref): Add comment.
[deliverable/binutils-gdb.git] / bfd / dwarf2.c
index 52cfe9e62e43b8bcf54560502c7357fabc625750..05b13041e0a240f4c6ff722fd257d834e9ffc507 100644 (file)
@@ -1,6 +1,6 @@
 /* DWARF 2 support.
    Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
-   2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+   2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
 
    Adapted from gdb/dwarf2read.c by Gavin Koch of Cygnus Solutions
    (gavin@cygnus.com).
@@ -36,7 +36,6 @@
 #include "libbfd.h"
 #include "elf-bfd.h"
 #include "elf/dwarf2.h"
-#include "arange-set.h"
 
 /* The data in the .debug_line statement prologue looks like this.  */
 
@@ -76,7 +75,7 @@ struct dwarf_block
   bfd_byte *data;
 };
 
-struct loadable_section
+struct adjusted_section
 {
   asection *section;
   bfd_vma adj_vma;
@@ -90,9 +89,6 @@ struct dwarf2_debug
   /* Last comp unit in list above.  */
   struct comp_unit *last_comp_unit;
 
-  /* Number of comp units. */
-  int comp_unit_count;
-
   /* The next unread compilation unit within the .debug_info section.
      Zero indicates that the .debug_info section has not been loaded
      into a buffer yet.  */
@@ -108,6 +104,12 @@ struct dwarf2_debug
   asection *sec;
   bfd_byte *sec_info_ptr;
 
+  /* A pointer to the memory block allocated for info_ptr.  Neither
+     info_ptr nor sec_info_ptr are guaranteed to stay pointing to the
+     beginning of the malloc block.  This is used only to free the
+     memory later.  */
+  bfd_byte *info_ptr_memory;
+
   /* Pointer to the symbol table.  */
   asymbol **syms;
 
@@ -115,25 +117,25 @@ struct dwarf2_debug
   bfd_byte *dwarf_abbrev_buffer;
 
   /* Length of the loaded .debug_abbrev section.  */
-  unsigned long dwarf_abbrev_size;
+  bfd_size_type dwarf_abbrev_size;
 
   /* Buffer for decode_line_info.  */
   bfd_byte *dwarf_line_buffer;
 
   /* Length of the loaded .debug_line section.  */
-  unsigned long dwarf_line_size;
+  bfd_size_type dwarf_line_size;
 
   /* Pointer to the .debug_str section loaded into memory.  */
   bfd_byte *dwarf_str_buffer;
 
   /* Length of the loaded .debug_str section.  */
-  unsigned long dwarf_str_size;
+  bfd_size_type dwarf_str_size;
 
   /* Pointer to the .debug_ranges section loaded into memory. */
   bfd_byte *dwarf_ranges_buffer;
 
   /* Length of the loaded .debug_ranges section. */
-  unsigned long dwarf_ranges_size;
+  bfd_size_type dwarf_ranges_size;
 
   /* If the most recent call to bfd_find_nearest_line was given an
      address in an inlined function, preserve a pointer into the
@@ -141,11 +143,11 @@ struct dwarf2_debug
      use. */
   struct funcinfo *inliner_chain;
 
-  /* Number of loadable sections.  */
-  unsigned int loadable_section_count;
+  /* Number of sections whose VMA we must adjust.  */
+  unsigned int adjusted_section_count;
 
-  /* Array of loadable sections.  */
-  struct loadable_section *loadable_sections;
+  /* Array of sections with adjusted VMA.  */
+  struct adjusted_section *adjusted_sections;
 
   /* Number of times find_line is called.  This is used in
      the heuristic for enabling the info hash tables.  */
@@ -167,33 +169,11 @@ struct dwarf2_debug
 #define STASH_INFO_HASH_OFF        0
 #define STASH_INFO_HASH_ON         1
 #define STASH_INFO_HASH_DISABLED   2
-
-  /* Arange-set for fast lookup.  The aranges in this set have pointers
-     to compilation units containing them.  In the unlikely case that there
-     are multiple compilation units associated with an arange, the arange-set
-     is a NULL pointer and we need to fall back to sequential search.  */
-  arange_set comp_unit_arange_set;
-
-  /* Status of global arange set.  */
-  int arange_set_status;
-#define STASH_ARANGE_SET_OFF           0
-#define STASH_ARANGE_SET_ON            1
-#define STASH_ARANGE_SET_DISABLED      2
-
-  /* Build a whole binary arange-set for compilation unit look-up
-     if there are at least this many compilation units.  */
-#define STASH_ARANGE_SET_TRIGGER       500
 };
 
-/* Simple singly linked list for aranges.  We now use a more scalable
-   arange-set for aranges in compilation units.  For functions, we still
-   use this since it is more efficient for simple cases.  */
-
 struct arange
 {
   struct arange *next;
-  /* The lowest and highest addresses contained a compilation
-     unit as specified in the compilation unit's header.  */
   bfd_vma low;
   bfd_vma high;
 };
@@ -213,8 +193,9 @@ struct comp_unit
   /* Keep the bfd convenient (for memory allocation).  */
   bfd *abfd;
 
-  /* The set of aranges in a compilation unit.  */
-  arange_set arange_set;
+  /* The lowest and highest addresses contained in this compilation
+     unit as specified in the compilation unit header.  */
+  struct arange arange;
 
   /* The DW_AT_name attribute (for error messages).  */
   char *name;
@@ -256,6 +237,9 @@ struct comp_unit
   /* Pointer to dwarf2_debug structure.  */
   struct dwarf2_debug *stash;
 
+  /* DWARF format version for this unit - from unit header.  */
+  int version;
+
   /* Address size for this unit - from unit header.  */
   unsigned char addr_size;
 
@@ -339,7 +323,7 @@ info_hash_table_newfunc (struct bfd_hash_entry *entry,
 
   /* Call the allocation method of the base class.  */
   ret = ((struct info_hash_entry *)
-         bfd_hash_newfunc ((struct bfd_hash_entry *) ret, table, string));
+        bfd_hash_newfunc ((struct bfd_hash_entry *) ret, table, string));
 
   /* Initialize the local fields here.  */
   if (ret)
@@ -414,6 +398,82 @@ lookup_info_hash_table (struct info_hash_table *hash_table, const char *key)
   return entry ? entry->head : NULL;
 }
 
+/* Read a section into its appropriate place in the dwarf2_debug
+   struct (indicated by SECTION_BUFFER and SECTION_SIZE).  If SYMS is
+   not NULL, use bfd_simple_get_relocated_section_contents to read the
+   section contents, otherwise use bfd_get_section_contents.  Fail if
+   the located section does not contain at least OFFSET bytes.  */
+
+static bfd_boolean
+read_section (bfd *           abfd,
+             const char *    section_name,
+             const char *    compressed_section_name,
+             asymbol **      syms,
+             bfd_uint64_t    offset,
+             bfd_byte **     section_buffer,
+             bfd_size_type * section_size)
+{
+  asection *msec;
+  bfd_boolean section_is_compressed = FALSE;
+
+  /* read_section is a noop if the section has already been read.  */
+  if (!*section_buffer)
+    {
+      msec = bfd_get_section_by_name (abfd, section_name);
+      if (! msec && compressed_section_name)
+       {
+         msec = bfd_get_section_by_name (abfd, compressed_section_name);
+         section_is_compressed = TRUE;
+       }
+      if (! msec)
+       {
+         (*_bfd_error_handler) (_("Dwarf Error: Can't find %s section."), section_name);
+         bfd_set_error (bfd_error_bad_value);
+         return FALSE;
+       }
+
+      *section_size = msec->rawsize ? msec->rawsize : msec->size;
+      if (syms)
+       {
+         *section_buffer
+             = bfd_simple_get_relocated_section_contents (abfd, msec, NULL, syms);
+         if (! *section_buffer)
+           return FALSE;
+       }
+      else
+       {
+         *section_buffer = bfd_malloc (*section_size);
+         if (! *section_buffer)
+           return FALSE;
+         if (! bfd_get_section_contents (abfd, msec, *section_buffer,
+                                         0, *section_size))
+           return FALSE;
+       }
+
+      if (section_is_compressed)
+       {
+         if (! bfd_uncompress_section_contents (section_buffer, section_size))
+           {
+             (*_bfd_error_handler) (_("Dwarf Error: unable to decompress %s section."), compressed_section_name);
+             bfd_set_error (bfd_error_bad_value);
+             return FALSE;
+           }
+       }
+    }
+
+  /* It is possible to get a bad value for the offset into the section
+     that the client wants.  Validate it here to avoid trouble later.  */
+  if (offset != 0 && offset >= *section_size)
+    {
+      (*_bfd_error_handler) (_("Dwarf Error: Offset (%lu) greater than or equal to %s size (%lu)."),
+                            (long) offset, section_name, *section_size);
+      bfd_set_error (bfd_error_bad_value);
+      return FALSE;
+    }
+
+  return TRUE;
+}
+
 /* VERBATIM
    The following function up to the END VERBATIM mark are
    copied directly from dwarf2read.c.  */
@@ -455,9 +515,6 @@ read_n_bytes (bfd *abfd ATTRIBUTE_UNUSED,
              bfd_byte *buf,
              unsigned int size ATTRIBUTE_UNUSED)
 {
-  /* If the size of a host char is 8 bits, we can return a pointer
-     to the buffer, otherwise we have to copy the data to a buffer
-     allocated on the temporary obstack.  */
   return buf;
 }
 
@@ -468,6 +525,7 @@ read_string (bfd *abfd ATTRIBUTE_UNUSED,
 {
   /* Return a pointer to the embedded string.  */
   char *str = (char *) buf;
+
   if (*str == '\0')
     {
       *bytes_read_ptr = 1;
@@ -478,10 +536,12 @@ read_string (bfd *abfd ATTRIBUTE_UNUSED,
   return str;
 }
 
+/* END VERBATIM */
+
 static char *
-read_indirect_string (struct comp_unit* unit,
-                     bfd_byte *buf,
-                     unsigned int *bytes_read_ptr)
+read_indirect_string (struct comp_unit * unit,
+                     bfd_byte *         buf,
+                     unsigned int *     bytes_read_ptr)
 {
   bfd_uint64_t offset;
   struct dwarf2_debug *stash = unit->stash;
@@ -491,41 +551,13 @@ read_indirect_string (struct comp_unit* unit,
     offset = read_4_bytes (unit->abfd, buf);
   else
     offset = read_8_bytes (unit->abfd, buf);
-  *bytes_read_ptr = unit->offset_size;
-
-  if (! stash->dwarf_str_buffer)
-    {
-      asection *msec;
-      bfd *abfd = unit->abfd;
-      bfd_size_type sz;
-
-      msec = bfd_get_section_by_name (abfd, ".debug_str");
-      if (! msec)
-       {
-         (*_bfd_error_handler)
-           (_("Dwarf Error: Can't find .debug_str section."));
-         bfd_set_error (bfd_error_bad_value);
-         return NULL;
-       }
-
-      sz = msec->rawsize ? msec->rawsize : msec->size;
-      stash->dwarf_str_size = sz;
-      stash->dwarf_str_buffer = bfd_alloc (abfd, sz);
-      if (! stash->dwarf_str_buffer)
-       return NULL;
 
-      if (! bfd_get_section_contents (abfd, msec, stash->dwarf_str_buffer,
-                                     0, sz))
-       return NULL;
-    }
+  *bytes_read_ptr = unit->offset_size;
 
-  if (offset >= stash->dwarf_str_size)
-    {
-      (*_bfd_error_handler) (_("Dwarf Error: DW_FORM_strp offset (%lu) greater than or equal to .debug_str size (%lu)."),
-                            (unsigned long) offset, stash->dwarf_str_size);
-      bfd_set_error (bfd_error_bad_value);
-      return NULL;
-    }
+  if (! read_section (unit->abfd, ".debug_str", ".zdebug_str",
+                     stash->syms, offset,
+                     &stash->dwarf_str_buffer, &stash->dwarf_str_size))
+    return NULL;
 
   str = (char *) stash->dwarf_str_buffer + offset;
   if (*str == '\0')
@@ -533,8 +565,6 @@ read_indirect_string (struct comp_unit* unit,
   return str;
 }
 
-/* END VERBATIM */
-
 static bfd_uint64_t
 read_address (struct comp_unit *unit, bfd_byte *buf)
 {
@@ -607,33 +637,10 @@ read_abbrevs (bfd *abfd, bfd_uint64_t offset, struct dwarf2_debug *stash)
   unsigned int abbrev_form, hash_number;
   bfd_size_type amt;
 
-  if (! stash->dwarf_abbrev_buffer)
-    {
-      asection *msec;
-
-      msec = bfd_get_section_by_name (abfd, ".debug_abbrev");
-      if (! msec)
-       {
-         (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_abbrev section."));
-         bfd_set_error (bfd_error_bad_value);
-         return 0;
-       }
-
-      stash->dwarf_abbrev_size = msec->size;
-      stash->dwarf_abbrev_buffer
-       = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
-                                                    stash->syms);
-      if (! stash->dwarf_abbrev_buffer)
-         return 0;
-    }
-
-  if (offset >= stash->dwarf_abbrev_size)
-    {
-      (*_bfd_error_handler) (_("Dwarf Error: Abbrev offset (%lu) greater than or equal to .debug_abbrev size (%lu)."),
-                            (unsigned long) offset, stash->dwarf_abbrev_size);
-      bfd_set_error (bfd_error_bad_value);
-      return 0;
-    }
+  if (! read_section (abfd, ".debug_abbrev", ".zdebug_abbrev",
+                     stash->syms, offset,
+                     &stash->dwarf_abbrev_buffer, &stash->dwarf_abbrev_size))
+    return 0;
 
   amt = sizeof (struct abbrev_info*) * ABBREV_HASH_SIZE;
   abbrevs = bfd_zalloc (abfd, amt);
@@ -740,9 +747,20 @@ read_attribute_value (struct attribute *attr,
 
   switch (form)
     {
-    case DW_FORM_addr:
-      /* FIXME: DWARF3 draft says DW_FORM_ref_addr is offset_size.  */
     case DW_FORM_ref_addr:
+      /* DW_FORM_ref_addr is an address in DWARF2, and an offset in
+        DWARF3.  */
+      if (unit->version == 3)
+       {
+         if (unit->offset_size == 4)
+           attr->u.val = read_4_bytes (unit->abfd, info_ptr);
+         else
+           attr->u.val = read_8_bytes (unit->abfd, info_ptr);
+         info_ptr += unit->offset_size;
+         break;
+       }
+      /* FALLTHROUGH */
+    case DW_FORM_addr:
       attr->u.val = read_address (unit, info_ptr);
       info_ptr += unit->addr_size;
       break;
@@ -895,8 +913,8 @@ struct line_info_table
   char *comp_dir;
   char **dirs;
   struct fileinfo* files;
-  struct line_info* last_line;  /* Largest VMA.  */
-  struct line_info* lcl_head;   /* Local head; used in 'add_line_info'.  */
+  struct line_info* last_line;  /* largest VMA */
+  struct line_info* lcl_head;   /* local head; used in 'add_line_info' */
 };
 
 /* Remember some information about each function.  If the function is
@@ -906,121 +924,35 @@ struct line_info_table
 
 struct funcinfo
 {
-  struct funcinfo *prev_func;          /* Pointer to previous function in list of all functions */
-  struct funcinfo *caller_func;                /* Pointer to function one scope higher */
-  char *caller_file;                   /* Source location file name where caller_func inlines this func */
-  int caller_line;                     /* Source location line number where caller_func inlines this func */
-  char *file;                          /* Source location file name */
-  int line;                            /* Source location line number */
+  struct funcinfo *prev_func;          /* Pointer to previous function in list of all functions */
+  struct funcinfo *caller_func;                /* Pointer to function one scope higher */
+  char *caller_file;                   /* Source location file name where caller_func inlines this func */
+  int caller_line;                     /* Source location line number where caller_func inlines this func */
+  char *file;                          /* Source location file name */
+  int line;                            /* Source location line number */
   int tag;
   char *name;
   struct arange arange;
-  asection *sec;                       /* Where the symbol is defined */
+  asection *sec;                       /* Where the symbol is defined */
 };
 
 struct varinfo
 {
-  /* Pointer to previous variable in list of all variables */
+  /* Pointer to previous variable in list of all variables */
   struct varinfo *prev_var;
-  /* Source location file name */
+  /* Source location file name */
   char *file;
-  /* Source location line number */
+  /* Source location line number */
   int line;
   int tag;
   char *name;
   bfd_vma addr;
-  /* Where the symbol is defined */
+  /* Where the symbol is defined */
   asection *sec;
-  /* Is this a stack variable?  */
+  /* Is this a stack variable? */
   unsigned int stack: 1;
 };
 
-/* Arange-sets:
-   To handle extremely large binaries, we want to use a more efficient data
-   structure than a singly-linked list to represent aranges.  So instead we
-   use an arange-set, which supports efficient insertions and queries.  We
-   use a simple arange-set with no values attached to represent the aranges
-   in a compilation unit and we also use a global arange-set to store all
-   the aranges in all the compilation units.  The global arange-set stores
-   values which are pointers to the compilation units.
-
-   Normally aranges in the global set do not overlap, but this can happen.
-   To simplify things and to prevent excessive memory usage, an arange in
-   the global set can only point to at most one compilation unit.  In case
-   of an overlap, the pointer is set to NULL, meaning that there are more
-   than one compilation units containing that arange.  Code that looks up
-   the global set should fall back to searching all compilation units if
-   that happens.  */
-/* Allocate memory for an arange set.  */ 
-
-static void *
-dwarf2_arange_set_allocate (int size, void *data)
-{
-  return bfd_alloc ((bfd *) data, size);
-}
-
-/* Deallocate memory of an arange set.  */ 
-
-static void
-dwarf2_arange_set_deallocate (void *object ATTRIBUTE_UNUSED,
-                             void *data ATTRIBUTE_UNUSED)
-{
-  /* Do nothing. Let BFD clean up when it's done.  */
-}
-
-/* Combine two comp unit pointers.  If they are the same,
-   return either one, otherwise return NULL.  */
-
-static arange_value_type
-dwarf2_combine_arange_value (arange_value_type value1,
-                            arange_value_type value2,
-                            void *data ATTRIBUTE_UNUSED)
-{
-  return ((value1 == value2) ? value1 : 0); 
-}
-
-/* Create a simple arange set that does not store values.  */
-
-static arange_set
-dwarf2_arange_set_new (bfd *abfd)
-{
-  return arange_set_new (dwarf2_arange_set_allocate,
-                        dwarf2_arange_set_deallocate,
-                        FALSE, NULL, NULL, NULL, NULL, (void *) abfd);
-}
-
-/* Create an arange set that stores pointers to compilation units.  */
-
-static arange_set
-dwarf2_arange_set_with_value_new (bfd *abfd)
-{
-  return arange_set_new (dwarf2_arange_set_allocate,
-                        dwarf2_arange_set_deallocate,
-                        TRUE, NULL, NULL, dwarf2_combine_arange_value,
-                        NULL, (void *) abfd);
-}
-
-/* Add an arange to a compilation unit.  Add the arange to both the
-   unit's valueless arange set and the global arange set.  */
-
-static void
-dwarf2_comp_unit_arange_add (struct comp_unit *unit,
-                            bfd_vma low, 
-                            bfd_vma high)
-{
-  /* Add arange to unit's local arange set.  */
-  arange_set_insert (unit->arange_set, low, high - 1, 0);
-
-  if (unit->stash->arange_set_status == STASH_ARANGE_SET_ON)
-    {
-      BFD_ASSERT (unit->stash->comp_unit_arange_set);
-      arange_set_insert (unit->stash->comp_unit_arange_set, low, high - 1,
-                        (arange_value_type) unit);
-    }
-}
-
 /* Return TRUE if NEW_LINE should sort after LINE.  */
 
 static inline bfd_boolean
@@ -1046,7 +978,7 @@ add_line_info (struct line_info_table *table,
               int end_sequence)
 {
   bfd_size_type amt = sizeof (struct line_info);
-  struct line_info * info = bfd_alloc (table->abfd, amt);
+  struct line_info* info = bfd_alloc (table->abfd, amt);
 
   /* Set member data of 'info'.  */
   info->address = address;
@@ -1090,9 +1022,9 @@ add_line_info (struct line_info_table *table,
       table->last_line = info;
     }
   else if (!table->last_line
-          || new_line_sorts_after (info, table->last_line))
+      || new_line_sorts_after (info, table->last_line))
     {
-      /* Normal case: add 'info' to the beginning of the list */
+      /* Normal case: add 'info' to the beginning of the list */
       info->prev_line = table->last_line;
       table->last_line = info;
 
@@ -1112,7 +1044,7 @@ add_line_info (struct line_info_table *table,
     {
       /* Abnormal and hard: Neither 'last_line' nor 'lcl_head' are valid
         heads for 'info'.  Reset 'lcl_head'.  */
-      struct line_info* li2 = table->last_line; /* Always non-NULL.  */
+      struct line_info* li2 = table->last_line; /* always non-NULL */
       struct line_info* li1 = li2->prev_line;
 
       while (li1)
@@ -1121,7 +1053,7 @@ add_line_info (struct line_info_table *table,
              && new_line_sorts_after (info, li1))
            break;
 
-         li2 = li1; /* Always non-NULL.  */
+         li2 = li1; /* always non-NULL */
          li1 = li1->prev_line;
        }
       table->lcl_head = li2;
@@ -1195,12 +1127,11 @@ concat_filename (struct line_info_table *table, unsigned int file)
 }
 
 static void
-arange_add (bfd *abfd, struct arange *first_arange, bfd_vma low_pc,
-           bfd_vma high_pc)
+arange_add (bfd *abfd, struct arange *first_arange, bfd_vma low_pc, bfd_vma high_pc)
 {
   struct arange *arange;
 
-  /* If the first arange is empty, use it.  */
+  /* If the first arange is empty, use it. */
   if (first_arange->high == 0)
     {
       first_arange->low = low_pc;
@@ -1227,7 +1158,7 @@ arange_add (bfd *abfd, struct arange *first_arange, bfd_vma low_pc,
   while (arange);
 
   /* Need to allocate a new arange and insert it into the arange list.
-     Order isn't significant, so just insert after the first arange.  */
+     Order isn't significant, so just insert after the first arange. */
   arange = bfd_zalloc (abfd, sizeof (*arange));
   arange->low = low_pc;
   arange->high = high_pc;
@@ -1250,35 +1181,10 @@ decode_line_info (struct comp_unit *unit, struct dwarf2_debug *stash)
   unsigned char op_code, extended_op, adj_opcode;
   bfd_size_type amt;
 
-  if (! stash->dwarf_line_buffer)
-    {
-      asection *msec;
-
-      msec = bfd_get_section_by_name (abfd, ".debug_line");
-      if (! msec)
-       {
-         (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_line section."));
-         bfd_set_error (bfd_error_bad_value);
-         return 0;
-       }
-
-      stash->dwarf_line_size = msec->size;
-      stash->dwarf_line_buffer
-       = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
-                                                    stash->syms);
-      if (! stash->dwarf_line_buffer)
-       return 0;
-    }
-
-  /* It is possible to get a bad value for the line_offset.  Validate
-     it here so that we won't get a segfault below.  */
-  if (unit->line_offset >= stash->dwarf_line_size)
-    {
-      (*_bfd_error_handler) (_("Dwarf Error: Line offset (%lu) greater than or equal to .debug_line size (%lu)."),
-                            unit->line_offset, stash->dwarf_line_size);
-      bfd_set_error (bfd_error_bad_value);
-      return 0;
-    }
+  if (! read_section (abfd, ".debug_line", ".zdebug_line",
+                     stash->syms, unit->line_offset,
+                     &stash->dwarf_line_buffer, &stash->dwarf_line_size))
+    return 0;
 
   amt = sizeof (struct line_info_table);
   table = bfd_alloc (abfd, amt);
@@ -1462,7 +1368,7 @@ decode_line_info (struct comp_unit *unit, struct dwarf2_debug *stash)
                    low_pc = address;
                  if (address > high_pc)
                    high_pc = address;
-                 dwarf2_comp_unit_arange_add (unit, low_pc, high_pc);
+                 arange_add (unit->abfd, &unit->arange, low_pc, high_pc);
                  break;
                case DW_LNE_set_address:
                  address = read_address (unit, line_ptr);
@@ -1680,27 +1586,9 @@ static bfd_boolean
 read_debug_ranges (struct comp_unit *unit)
 {
   struct dwarf2_debug *stash = unit->stash;
-  if (! stash->dwarf_ranges_buffer)
-    {
-      bfd *abfd = unit->abfd;
-      asection *msec;
-
-      msec = bfd_get_section_by_name (abfd, ".debug_ranges");
-      if (! msec)
-       {
-         (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_ranges section."));
-         bfd_set_error (bfd_error_bad_value);
-         return FALSE;
-       }
-
-      stash->dwarf_ranges_size = msec->size;
-      stash->dwarf_ranges_buffer
-       = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
-                                                    stash->syms);
-      if (! stash->dwarf_ranges_buffer)
-       return FALSE;
-    }
-  return TRUE;
+  return read_section (unit->abfd, ".debug_ranges", ".zdebug_ranges",
+                      stash->syms, 0,
+                      &stash->dwarf_ranges_buffer, &stash->dwarf_ranges_size);
 }
 
 /* Function table functions.  */
@@ -1833,16 +1721,30 @@ lookup_symbol_in_variable_table (struct comp_unit *unit,
 }
 
 static char *
-find_abstract_instance_name (struct comp_unit *unit, bfd_uint64_t die_ref)
+find_abstract_instance_name (struct comp_unit *unit,
+                            struct attribute *attr_ptr)
 {
   bfd *abfd = unit->abfd;
   bfd_byte *info_ptr;
   unsigned int abbrev_number, bytes_read, i;
   struct abbrev_info *abbrev;
+  bfd_uint64_t die_ref = attr_ptr->u.val;
   struct attribute attr;
   char *name = 0;
 
-  info_ptr = unit->info_ptr_unit + die_ref;
+  /* DW_FORM_ref_addr can reference an entry in a different CU. It
+     is an offset from the .debug_info section, not the current CU.  */
+  if (attr_ptr->form == DW_FORM_ref_addr)
+    {
+      /* We only support DW_FORM_ref_addr within the same file, so
+        any relocations should be resolved already.  */
+      if (!die_ref)
+       abort ();
+
+      info_ptr = unit->stash->sec_info_ptr + die_ref;
+    }
+  else 
+    info_ptr = unit->info_ptr_unit + die_ref;
   abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
   info_ptr += bytes_read;
 
@@ -1868,7 +1770,7 @@ find_abstract_instance_name (struct comp_unit *unit, bfd_uint64_t die_ref)
                    name = attr.u.str;
                  break;
                case DW_AT_specification:
-                 name = find_abstract_instance_name (unit, attr.u.val);
+                 name = find_abstract_instance_name (unit, &attr);
                  break;
                case DW_AT_MIPS_linkage_name:
                  name = attr.u.str;
@@ -1879,44 +1781,11 @@ find_abstract_instance_name (struct comp_unit *unit, bfd_uint64_t die_ref)
            }
        }
     }
-  return name;
-}
-
-/* Type of callback function used in read_rangelist below.  */
-
-typedef void (*read_rangelist_callback_t)(struct comp_unit*, bfd_vma,
-                                         bfd_vma, void*);
-
-/* Call back to add an arange to the old-style arange list.  */
-
-static void
-read_rangelist_insert_arange_list (struct comp_unit *unit,
-                                  bfd_vma low,
-                                  bfd_vma high,
-                                  void *data)
-{
-  arange_add (unit->abfd, (struct arange*) data, low, high);
+  return (name);
 }
 
-/* Callback to add an arange in the arange set of a compilation unit.  */
-
 static void
-read_rangelist_comp_unit_arange_add (struct comp_unit *unit,
-                                    bfd_vma low,
-                                    bfd_vma high,
-                                    void *data ATTRIBUTE_UNUSED)
-{
-  dwarf2_comp_unit_arange_add (unit, low, high);
-}
-
-/* Read ARANGE list of a compilation unit.  For each read arange,
-   call the supplied callback function for further processing.  */
-
-static void
-read_rangelist (struct comp_unit *unit,
-               bfd_uint64_t offset,
-               read_rangelist_callback_t callback,
-               void *callback_data)
+read_rangelist (struct comp_unit *unit, struct arange *arange, bfd_uint64_t offset)
 {
   bfd_byte *ranges_ptr;
   bfd_vma base_address = unit->base_address;
@@ -1933,28 +1802,17 @@ read_rangelist (struct comp_unit *unit,
       bfd_vma low_pc;
       bfd_vma high_pc;
 
-      if (unit->addr_size == 4)
-       {
-         low_pc = read_4_bytes (unit->abfd, ranges_ptr);
-         ranges_ptr += 4;
-         high_pc = read_4_bytes (unit->abfd, ranges_ptr);
-         ranges_ptr += 4;
-       }
-      else
-       {
-         low_pc = read_8_bytes (unit->abfd, ranges_ptr);
-         ranges_ptr += 8;
-         high_pc = read_8_bytes (unit->abfd, ranges_ptr);
-         ranges_ptr += 8;
-       }
+      low_pc = read_address (unit, ranges_ptr);
+      ranges_ptr += unit->addr_size;
+      high_pc = read_address (unit, ranges_ptr);
+      ranges_ptr += unit->addr_size;
+
       if (low_pc == 0 && high_pc == 0)
        break;
       if (low_pc == -1UL && high_pc != -1UL)
        base_address = high_pc;
       else
-       /* Call callback to process new arange.  */
-       (callback) (unit, base_address + low_pc, base_address + high_pc,
-                   callback_data);
+       arange_add (unit->abfd, arange, base_address + low_pc, base_address + high_pc);
     }
 }
 
@@ -2065,7 +1923,7 @@ scan_unit_for_symbols (struct comp_unit *unit)
                  break;
 
                case DW_AT_abstract_origin:
-                 func->name = find_abstract_instance_name (unit, attr.u.val);
+                 func->name = find_abstract_instance_name (unit, &attr);
                  break;
 
                case DW_AT_name:
@@ -2087,9 +1945,7 @@ scan_unit_for_symbols (struct comp_unit *unit)
                  break;
 
                case DW_AT_ranges:
-                 read_rangelist (unit, attr.u.val,
-                                 read_rangelist_insert_arange_list,
-                                 & func->arange);
+                 read_rangelist (unit, &func->arange, attr.u.val);
                  break;
 
                case DW_AT_decl_file:
@@ -2235,9 +2091,9 @@ parse_comp_unit (struct dwarf2_debug *stash,
   addr_size = read_1_byte (abfd, info_ptr);
   info_ptr += 1;
 
-  if (version != 2)
+  if (version != 2 && version != 3)
     {
-      (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2 information."), version);
+      (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2 and 3 information."), version);
       bfd_set_error (bfd_error_bad_value);
       return 0;
     }
@@ -2285,13 +2141,13 @@ parse_comp_unit (struct dwarf2_debug *stash,
   amt = sizeof (struct comp_unit);
   unit = bfd_zalloc (abfd, amt);
   unit->abfd = abfd;
+  unit->version = version;
   unit->addr_size = addr_size;
   unit->offset_size = offset_size;
   unit->abbrevs = abbrevs;
   unit->end_ptr = end_ptr;
   unit->stash = stash;
   unit->info_ptr_unit = info_ptr_unit;
-  unit->arange_set = dwarf2_arange_set_new (abfd);
 
   for (i = 0; i < abbrev->num_attrs; ++i)
     {
@@ -2323,14 +2179,12 @@ parse_comp_unit (struct dwarf2_debug *stash,
          break;
 
        case DW_AT_ranges:
-         read_rangelist (unit, attr.u.val,
-                         read_rangelist_comp_unit_arange_add, NULL);
+         read_rangelist (unit, &unit->arange, attr.u.val);
          break;
 
        case DW_AT_comp_dir:
          {
            char *comp_dir = attr.u.str;
-
            if (comp_dir)
              {
                /* Irix 6.2 native cc prepends <machine>.: to the compilation
@@ -2348,9 +2202,10 @@ parse_comp_unit (struct dwarf2_debug *stash,
          break;
        }
     }
-
   if (high_pc != 0)
-    dwarf2_comp_unit_arange_add (unit, low_pc, high_pc);
+    {
+      arange_add (unit->abfd, &unit->arange, low_pc, high_pc);
+    }
 
   unit->first_child_die_ptr = info_ptr;
   return unit;
@@ -2365,7 +2220,21 @@ parse_comp_unit (struct dwarf2_debug *stash,
 static bfd_boolean
 comp_unit_contains_address (struct comp_unit *unit, bfd_vma addr)
 {
-  return arange_set_lookup_address (unit->arange_set, addr, NULL, NULL, NULL);
+  struct arange *arange;
+
+  if (unit->error)
+    return FALSE;
+
+  arange = &unit->arange;
+  do
+    {
+      if (addr >= arange->low && addr < arange->high)
+       return TRUE;
+      arange = arange->next;
+    }
+  while (arange);
+
+  return FALSE;
 }
 
 /* If UNIT contains ADDR, set the output parameters to the values for
@@ -2598,6 +2467,7 @@ comp_unit_hash_info (struct dwarf2_debug *stash,
    identify and discard duplicate debugging sections for different
    compilation units.  */
 #define DWARF2_DEBUG_INFO ".debug_info"
+#define DWARF2_COMPRESSED_DEBUG_INFO ".zdebug_info"
 #define GNU_LINKONCE_INFO ".gnu.linkonce.wi."
 
 static asection *
@@ -2612,6 +2482,9 @@ find_debug_info (bfd *abfd, asection *after_sec)
       if (strcmp (msec->name, DWARF2_DEBUG_INFO) == 0)
        return msec;
 
+      if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+       return msec;
+
       if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO))
        return msec;
 
@@ -2621,49 +2494,63 @@ find_debug_info (bfd *abfd, asection *after_sec)
   return NULL;
 }
 
-/* Unset vmas for loadable sections in STASH.  */
+/* Unset vmas for adjusted sections in STASH.  */
 
 static void
 unset_sections (struct dwarf2_debug *stash)
 {
   unsigned int i;
-  struct loadable_section *p;
+  struct adjusted_section *p;
 
-  i = stash->loadable_section_count;
-  p = stash->loadable_sections;
+  i = stash->adjusted_section_count;
+  p = stash->adjusted_sections;
   for (; i > 0; i--, p++)
     p->section->vma = 0;
 }
 
-/* Set unique vmas for loadable sections in ABFD and save vmas in
-   STASH for unset_sections.  */
+/* Set unique VMAs for loadable and DWARF sections in ABFD and save
+   VMAs in STASH for unset_sections.  */
 
 static bfd_boolean
 place_sections (bfd *abfd, struct dwarf2_debug *stash)
 {
-  struct loadable_section *p;
+  struct adjusted_section *p;
   unsigned int i;
 
-  if (stash->loadable_section_count != 0)
+  if (stash->adjusted_section_count != 0)
     {
-      i = stash->loadable_section_count;
-      p = stash->loadable_sections;
+      i = stash->adjusted_section_count;
+      p = stash->adjusted_sections;
       for (; i > 0; i--, p++)
        p->section->vma = p->adj_vma;
     }
   else
     {
       asection *sect;
-      bfd_vma last_vma = 0;
+      bfd_vma last_vma = 0, last_dwarf = 0;
       bfd_size_type amt;
-      struct loadable_section *p;
+      struct adjusted_section *p;
 
       i = 0;
       for (sect = abfd->sections; sect != NULL; sect = sect->next)
        {
          bfd_size_type sz;
+         int is_debug_info;
+
+         if (sect->vma != 0)
+           continue;
+
+         /* We need to adjust the VMAs of any .debug_info sections.
+            Skip compressed ones, since no relocations could target
+            them - they should not appear in object files anyway.  */
+         if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0)
+           is_debug_info = 1;
+         else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO))
+           is_debug_info = 1;
+         else
+           is_debug_info = 0;
 
-         if (sect->vma != 0 || (sect->flags & SEC_LOAD) == 0)
+         if (!is_debug_info && (sect->flags & SEC_LOAD) == 0)
            continue;
 
          sz = sect->rawsize ? sect->rawsize : sect->size;
@@ -2673,19 +2560,33 @@ place_sections (bfd *abfd, struct dwarf2_debug *stash)
          i++;
        }
 
-      amt = i * sizeof (struct loadable_section);
-      p = (struct loadable_section *) bfd_zalloc (abfd, amt);
+      amt = i * sizeof (struct adjusted_section);
+      p = (struct adjusted_section *) bfd_zalloc (abfd, amt);
       if (! p)
        return FALSE;
 
-      stash->loadable_sections = p;
-      stash->loadable_section_count = i;
+      stash->adjusted_sections = p;
+      stash->adjusted_section_count = i;
 
       for (sect = abfd->sections; sect != NULL; sect = sect->next)
        {
          bfd_size_type sz;
+         int is_debug_info;
 
-         if (sect->vma != 0 || (sect->flags & SEC_LOAD) == 0)
+         if (sect->vma != 0)
+           continue;
+
+         /* We need to adjust the VMAs of any .debug_info sections.
+            Skip compressed ones, since no relocations could target
+            them - they should not appear in object files anyway.  */
+         if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0)
+           is_debug_info = 1;
+         else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO))
+           is_debug_info = 1;
+         else
+           is_debug_info = 0;
+
+         if (!is_debug_info && (sect->flags & SEC_LOAD) == 0)
            continue;
 
          sz = sect->rawsize ? sect->rawsize : sect->size;
@@ -2693,7 +2594,13 @@ place_sections (bfd *abfd, struct dwarf2_debug *stash)
            continue;
 
          p->section = sect;
-         if (last_vma != 0)
+         if (is_debug_info)
+           {
+             BFD_ASSERT (sect->alignment_power == 0);
+             sect->vma = last_dwarf;
+             last_dwarf += sz;
+           }
+         else if (last_vma != 0)
            {
              /* Align the new address to the current section
                 alignment.  */
@@ -2701,9 +2608,12 @@ place_sections (bfd *abfd, struct dwarf2_debug *stash)
                           + ~((bfd_vma) -1 << sect->alignment_power))
                          & ((bfd_vma) -1 << sect->alignment_power));
              sect->vma = last_vma;
+             last_vma += sect->vma + sz;
            }
+         else
+           last_vma += sect->vma + sz;
+
          p->adj_vma = sect->vma;
-         last_vma += sect->vma + sz;
 
          p++;
        }
@@ -2937,107 +2847,6 @@ stash_find_line_fast (struct dwarf2_debug *stash,
                                   filename_ptr, linenumber_ptr);
 }
 
-typedef struct
-{
-  struct dwarf2_debug * stash;
-  arange_set            set;
-  struct comp_unit *    unit;
-} stash_copy_local_aranges_data_t;
-
-static int
-stash_copy_local_aranges (bfd_vma low,
-                         bfd_vma high,
-                         arange_value_type data ATTRIBUTE_UNUSED,
-                         void *info)
-{
-  bfd_boolean status;
-
-  stash_copy_local_aranges_data_t *copy_data = info;
-  status = arange_set_insert (copy_data->set, low, high,
-                             (arange_value_type) copy_data->unit);
-
-  return status ? 0 : 1;
-}
-
-static bfd_boolean
-stash_maybe_enable_arange_set (bfd *abfd, struct dwarf2_debug *stash)
-{
-  struct comp_unit *unit;
-  stash_copy_local_aranges_data_t copy_data;
-
-  if (stash->arange_set_status != STASH_ARANGE_SET_OFF)
-    return TRUE;
-
-  if (stash->comp_unit_count < STASH_ARANGE_SET_TRIGGER)
-    return TRUE;
-
-  if (stash->comp_unit_arange_set == NULL)
-    {
-      stash->comp_unit_arange_set =
-       dwarf2_arange_set_with_value_new (abfd);
-      if (!stash->comp_unit_arange_set)
-       {
-         stash->arange_set_status = STASH_ARANGE_SET_DISABLED;
-         return FALSE;
-       }
-    }
-
-  copy_data.stash = stash;
-  copy_data.set = stash->comp_unit_arange_set;
-  for (unit = stash->all_comp_units; unit; unit = unit->next_unit)
-    {
-      copy_data.unit = unit;
-      if (arange_set_foreach (unit->arange_set, stash_copy_local_aranges, 
-                             & copy_data))
-       {
-         stash->arange_set_status = STASH_ARANGE_SET_DISABLED;
-         return FALSE;
-       }
-    }
-  stash->arange_set_status = STASH_ARANGE_SET_ON;
-  return TRUE;
-}
-
-/* Find the nearest line to a given address and record filename,
-   function name and line number if found.  Return TRUE if a line is
-   found or FALSE otherwise.  */
-
-static bfd_boolean ATTRIBUTE_UNUSED
-stash_find_nearest_line_fast (struct dwarf2_debug *stash,
-                             bfd_vma addr,
-                             const char **filename_ptr,
-                             const char **functionname_ptr,
-                             unsigned int *linenumber_ptr)
-{
-  arange_value_type value;
-  struct comp_unit *unit;
-
-  /* Try looking up global arange set first.  */
-  if (stash->arange_set_status == STASH_ARANGE_SET_ON
-      && arange_set_lookup_address (stash->comp_unit_arange_set, addr, NULL,
-                                   NULL, &value))
-    {
-      if ((unit = (struct comp_unit *) value) != NULL)
-       /* There is only one compilation unit containing this address.  */
-       return comp_unit_find_nearest_line (unit, addr, filename_ptr,
-                                           functionname_ptr, linenumber_ptr,
-                                           stash);
-    }
-
-  /* The arange set is not available or there are multiple compilation
-     units containing this address.  Search all compilation units.  */
-  for (unit = stash->all_comp_units; unit; unit = unit->next_unit)
-    {
-      if (comp_unit_contains_address (unit, addr)
-         && comp_unit_find_nearest_line (unit, addr, filename_ptr,
-                                         functionname_ptr,
-                                         linenumber_ptr, stash))
-         return TRUE;
-    }
-
-  return FALSE;
-}
-
 /* Find the source code location of SYMBOL.  If SYMBOL is NULL
    then find the nearest source code location corresponding to
    the address SECTION + OFFSET.
@@ -3154,42 +2963,100 @@ find_line (bfd *abfd,
       else
        debug_bfd = abfd;
 
-      /* There can be more than one DWARF2 info section in a BFD these days.
-        Read them all in and produce one large stash.  We do this in two
-        passes - in the first pass we just accumulate the section sizes.
-        In the second pass we read in the section's contents.  The allows
-        us to avoid reallocing the data as we add sections to the stash.  */
-      for (total_size = 0; msec; msec = find_debug_info (debug_bfd, msec))
-       total_size += msec->size;
+      /* There can be more than one DWARF2 info section in a BFD these
+        days.  First handle the easy case when there's only one.  If
+        there's more than one, try case two: none of the sections is
+        compressed.  In that case, read them all in and produce one
+        large stash.  We do this in two passes - in the first pass we
+        just accumulate the section sizes, and in the second pass we
+        read in the section's contents.  (The allows us to avoid
+        reallocing the data as we add sections to the stash.)  If
+        some or all sections are compressed, then do things the slow
+        way, with a bunch of reallocs.  */
+
+      if (! find_debug_info (debug_bfd, msec))
+       {
+         /* Case 1: only one info section.  */
+         total_size = msec->size;
+         if (! read_section (debug_bfd, ".debug_info", ".zdebug_info",
+                             symbols, 0,
+                             &stash->info_ptr_memory, &total_size))
+           goto done;
+       }
+      else
+       {
+         int all_uncompressed = 1;
+         for (total_size = 0; msec; msec = find_debug_info (debug_bfd, msec))
+           {
+             total_size += msec->size;
+             if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+               all_uncompressed = 0;
+           }
+         if (all_uncompressed)
+           {
+             /* Case 2: multiple sections, but none is compressed.  */
+             stash->info_ptr_memory = bfd_malloc (total_size);
+             if (stash->info_ptr_memory == NULL)
+               goto done;
 
-      stash->info_ptr = bfd_alloc (debug_bfd, total_size);
-      if (stash->info_ptr == NULL)
-       goto done;
+             total_size = 0;
+             for (msec = find_debug_info (debug_bfd, NULL);
+                  msec;
+                  msec = find_debug_info (debug_bfd, msec))
+               {
+                 bfd_size_type size;
 
-      stash->info_ptr_end = stash->info_ptr;
+                 size = msec->size;
+                 if (size == 0)
+                   continue;
 
-      for (msec = find_debug_info (debug_bfd, NULL);
-          msec;
-          msec = find_debug_info (debug_bfd, msec))
-       {
-         bfd_size_type size;
-         bfd_size_type start;
+                 if (!(bfd_simple_get_relocated_section_contents
+                       (debug_bfd, msec, stash->info_ptr_memory + total_size,
+                        symbols)))
+                   goto done;
 
-         size = msec->size;
-         if (size == 0)
-           continue;
+                 total_size += size;
+               }
+           }
+         else
+           {
+             /* Case 3: multiple sections, some or all compressed.  */
+             stash->info_ptr_memory = NULL;
+             total_size = 0;
+             for (msec = find_debug_info (debug_bfd, NULL);
+                  msec;
+                  msec = find_debug_info (debug_bfd, msec))
+               {
+                 bfd_size_type size = msec->size;
+                 bfd_byte* buffer;
 
-         start = stash->info_ptr_end - stash->info_ptr;
+                 if (size == 0)
+                   continue;
 
-         if ((bfd_simple_get_relocated_section_contents
-              (debug_bfd, msec, stash->info_ptr + start, symbols)) == NULL)
-           continue;
+                 buffer = (bfd_simple_get_relocated_section_contents
+                           (debug_bfd, msec, NULL, symbols));
+                 if (! buffer)
+                   goto done;
 
-         stash->info_ptr_end = stash->info_ptr + start + size;
+                 if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+                   {
+                     if (! bfd_uncompress_section_contents (&buffer, &size))
+                       {
+                         free (buffer);
+                         goto done;
+                       }
+                   }
+                 stash->info_ptr_memory = bfd_realloc (stash->info_ptr_memory,
+                                                       total_size + size);
+                 memcpy (stash->info_ptr_memory + total_size, buffer, size);
+                 free (buffer);
+                 total_size += size;
+               }
+           }
        }
 
-      BFD_ASSERT (stash->info_ptr_end == stash->info_ptr + total_size);
-
+      stash->info_ptr = stash->info_ptr_memory;
+      stash->info_ptr_end = stash->info_ptr + total_size;
       stash->sec = find_debug_info (debug_bfd, NULL);
       stash->sec_info_ptr = stash->info_ptr;
       stash->syms = symbols;
@@ -3240,13 +3107,17 @@ find_line (bfd *abfd,
     }
   else
     {
-      if (stash->arange_set_status == STASH_ARANGE_SET_OFF)
-       stash_maybe_enable_arange_set (abfd, stash);
-
-      found = stash_find_nearest_line_fast (stash, addr, filename_ptr,
-                                           functionname_ptr, linenumber_ptr);
-      if (found)
-       goto done;
+      for (each = stash->all_comp_units; each; each = each->next_unit)
+       {
+         found = (comp_unit_contains_address (each, addr)
+                  && comp_unit_find_nearest_line (each, addr,
+                                                  filename_ptr,
+                                                  functionname_ptr,
+                                                  linenumber_ptr,
+                                                  stash));
+         if (found)
+           goto done;
+       }
     }
 
   /* The DWARF2 spec says that the initial length field, and the
@@ -3293,7 +3164,7 @@ find_line (bfd *abfd,
       else if (addr_size == 8)
        {
          offset_size = 4;
-          stash->info_ptr += 4;
+         stash->info_ptr += 4;
        }
       else
        stash->info_ptr += 4;
@@ -3302,8 +3173,42 @@ find_line (bfd *abfd,
        {
          each = parse_comp_unit (stash, length, info_ptr_unit,
                                  offset_size);
+         if (!each)
+           /* The dwarf information is damaged, don't trust it any
+              more.  */
+           break;
          stash->info_ptr += length;
 
+         if (stash->all_comp_units)
+           stash->all_comp_units->prev_unit = each;
+         else
+           stash->last_comp_unit = each;
+         
+         each->next_unit = stash->all_comp_units;
+         stash->all_comp_units = each;
+         
+         /* DW_AT_low_pc and DW_AT_high_pc are optional for
+            compilation units.  If we don't have them (i.e.,
+            unit->high == 0), we need to consult the line info table
+            to see if a compilation unit contains the given
+            address.  */
+         if (do_line)
+           found = (((symbol->flags & BSF_FUNCTION) == 0
+                     || each->arange.high == 0
+                     || comp_unit_contains_address (each, addr))
+                    && comp_unit_find_line (each, symbol, addr,
+                                            filename_ptr,
+                                            linenumber_ptr,
+                                            stash));
+         else
+           found = ((each->arange.high == 0
+                     || comp_unit_contains_address (each, addr))
+                    && comp_unit_find_nearest_line (each, addr,
+                                                    filename_ptr,
+                                                    functionname_ptr,
+                                                    linenumber_ptr,
+                                                    stash));
+
          if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr)
              == stash->sec->size)
            {
@@ -3311,40 +3216,8 @@ find_line (bfd *abfd,
              stash->sec_info_ptr = stash->info_ptr;
            }
 
-         if (each)
-           {
-             if (stash->all_comp_units)
-               stash->all_comp_units->prev_unit = each;
-             else
-               stash->last_comp_unit = each;
-
-             each->next_unit = stash->all_comp_units;
-             stash->all_comp_units = each;
-             stash->comp_unit_count++;
-
-             /* DW_AT_low_pc and DW_AT_high_pc are optional for
-                compilation units.  If we don't have them, we need to
-                consult the line info table to see if a compilation unit
-                contains the given address.  */
-             if (do_line)
-               found = (((symbol->flags & BSF_FUNCTION) == 0
-                         || arange_set_empty_p (each->arange_set)
-                         || comp_unit_contains_address (each, addr))
-                        && comp_unit_find_line (each, symbol, addr,
-                                                filename_ptr,
-                                                linenumber_ptr,
-                                                stash));
-             else
-               found = ((arange_set_empty_p (each->arange_set)
-                         || comp_unit_contains_address (each, addr))
-                        && comp_unit_find_nearest_line (each, addr,
-                                                        filename_ptr,
-                                                        functionname_ptr,
-                                                        linenumber_ptr,
-                                                        stash));
-             if (found)
-               goto done;
-           }
+         if (found)
+           goto done;
        }
     }
 
@@ -3435,6 +3308,8 @@ _bfd_dwarf2_cleanup_debug_info (bfd *abfd)
   for (each = stash->all_comp_units; each; each = each->next_unit)
     {
       struct abbrev_info **abbrevs = each->abbrevs;
+      struct funcinfo *function_table = each->function_table;
+      struct varinfo *variable_table = each->variable_table;
       size_t i;
 
       for (i = 0; i < ABBREV_HASH_SIZE; i++)
@@ -3453,9 +3328,43 @@ _bfd_dwarf2_cleanup_debug_info (bfd *abfd)
          free (each->line_table->dirs);
          free (each->line_table->files);
        }
+
+      while (function_table)
+       {
+         if (function_table->file)
+           {
+             free (function_table->file);
+             function_table->file = NULL;
+           }
+
+         if (function_table->caller_file)
+           {
+             free (function_table->caller_file);
+             function_table->caller_file = NULL;
+           }
+         function_table = function_table->prev_func;
+       }
+
+      while (variable_table)
+       {
+         if (variable_table->file)
+           {
+             free (variable_table->file);
+             variable_table->file = NULL;
+           }
+
+         variable_table = variable_table->prev_var;
+       }
     }
 
-  free (stash->dwarf_abbrev_buffer);
-  free (stash->dwarf_line_buffer);
-  free (stash->dwarf_ranges_buffer);
+  if (stash->dwarf_abbrev_buffer)
+    free (stash->dwarf_abbrev_buffer);
+  if (stash->dwarf_line_buffer)
+    free (stash->dwarf_line_buffer);
+  if (stash->dwarf_str_buffer)
+    free (stash->dwarf_str_buffer);
+  if (stash->dwarf_ranges_buffer)
+    free (stash->dwarf_ranges_buffer);
+  if (stash->info_ptr_memory)
+    free (stash->info_ptr_memory);
 }
This page took 0.041718 seconds and 4 git commands to generate.