/* DWARF 2 support.
- Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+ Copyright (C) 1994-2016 Free Software Foundation, Inc.
Adapted from gdb/dwarf2read.c by Gavin Koch of Cygnus Solutions
(gavin@cygnus.com).
/* Last comp unit in list above. */
struct comp_unit *last_comp_unit;
+ /* Names of the debug sections. */
+ const struct dwarf_debug_section *debug_sections;
+
/* The next unread compilation unit within the .debug_info section.
Zero indicates that the .debug_info section has not been loaded
into a buffer yet. */
asection *sec;
bfd_byte *sec_info_ptr;
+ /* Support for alternate debug info sections created by the DWZ utility:
+ This includes a pointer to an alternate bfd which contains *extra*,
+ possibly duplicate debug sections, and pointers to the loaded
+ .debug_str and .debug_info sections from this bfd. */
+ bfd * alt_bfd_ptr;
+ bfd_byte * alt_dwarf_str_buffer;
+ bfd_size_type alt_dwarf_str_size;
+ bfd_byte * alt_dwarf_info_buffer;
+ bfd_size_type alt_dwarf_info_size;
+
/* A pointer to the memory block allocated for info_ptr. Neither
info_ptr nor sec_info_ptr are guaranteed to stay pointing to the
beginning of the malloc block. This is used only to free the
use. */
struct funcinfo *inliner_chain;
+ /* Section VMAs at the time the stash was built. */
+ bfd_vma *sec_vma;
+
/* Number of sections whose VMA we must adjust. */
- unsigned int adjusted_section_count;
+ int adjusted_section_count;
/* Array of sections with adjusted VMA. */
struct adjusted_section *adjusted_sections;
#define STASH_INFO_HASH_OFF 0
#define STASH_INFO_HASH_ON 1
#define STASH_INFO_HASH_DISABLED 2
+
+ /* True if we opened bfd_ptr. */
+ bfd_boolean close_on_cleanup;
};
struct arange
/* The abbrev hash table. */
struct abbrev_info **abbrevs;
+ /* DW_AT_language. */
+ int lang;
+
/* Note that an error was found by comp_unit_find_nearest_line. */
int error;
/* Map of uncompressed DWARF debug section name to compressed one. It
is terminated by NULL uncompressed_name. */
-struct dwarf_debug_section dwarf_debug_sections[] =
+const struct dwarf_debug_section dwarf_debug_sections[] =
{
{ ".debug_abbrev", ".zdebug_abbrev" },
{ ".debug_aranges", ".zdebug_aranges" },
{ ".debug_frame", ".zdebug_frame" },
{ ".debug_info", ".zdebug_info" },
+ { ".debug_info", ".zdebug_info" },
{ ".debug_line", ".zdebug_line" },
{ ".debug_loc", ".zdebug_loc" },
{ ".debug_macinfo", ".zdebug_macinfo" },
+ { ".debug_macro", ".zdebug_macro" },
{ ".debug_pubnames", ".zdebug_pubnames" },
{ ".debug_pubtypes", ".zdebug_pubtypes" },
{ ".debug_ranges", ".zdebug_ranges" },
{ ".debug_static_func", ".zdebug_static_func" },
{ ".debug_static_vars", ".zdebug_static_vars" },
{ ".debug_str", ".zdebug_str", },
+ { ".debug_str", ".zdebug_str", },
{ ".debug_types", ".zdebug_types" },
/* GNU DWARF 1 extensions */
{ ".debug_sfnames", ".zdebug_sfnames" },
{ NULL, NULL },
};
+/* NB/ Numbers in this enum must match up with indicies
+ into the dwarf_debug_sections[] array above. */
enum dwarf_debug_section_enum
{
debug_abbrev = 0,
debug_aranges,
debug_frame,
debug_info,
+ debug_info_alt,
debug_line,
debug_loc,
debug_macinfo,
+ debug_macro,
debug_pubnames,
debug_pubtypes,
debug_ranges,
debug_static_func,
debug_static_vars,
debug_str,
+ debug_str_alt,
debug_types,
debug_sfnames,
debug_srcinfo,
if (ret == NULL)
{
ret = (struct info_hash_entry *) bfd_hash_allocate (table,
- sizeof (* ret));
+ sizeof (* ret));
if (ret == NULL)
return NULL;
}
{
struct info_hash_table *hash_table;
- hash_table = (struct info_hash_table *)
- bfd_alloc (abfd, sizeof (struct info_hash_table));
+ hash_table = ((struct info_hash_table *)
+ bfd_alloc (abfd, sizeof (struct info_hash_table)));
if (!hash_table)
return hash_table;
return FALSE;
node = (struct info_list_node *) bfd_hash_allocate (&hash_table->base,
- sizeof (*node));
+ sizeof (*node));
if (!node)
return FALSE;
static bfd_boolean
read_section (bfd * abfd,
- enum dwarf_debug_section_enum sec,
+ const struct dwarf_debug_section *sec,
asymbol ** syms,
bfd_uint64_t offset,
bfd_byte ** section_buffer,
bfd_size_type * section_size)
{
asection *msec;
- const char *section_name = dwarf_debug_sections[sec].uncompressed_name;
+ const char *section_name = sec->uncompressed_name;
- /* read_section is a noop if the section has already been read. */
- if (!*section_buffer)
+ /* The section may have already been read. */
+ if (*section_buffer == NULL)
{
msec = bfd_get_section_by_name (abfd, section_name);
if (! msec)
{
- section_name = dwarf_debug_sections[sec].compressed_name;
- msec = bfd_get_section_by_name (abfd, section_name);
+ section_name = sec->compressed_name;
+ if (section_name != NULL)
+ msec = bfd_get_section_by_name (abfd, section_name);
}
if (! msec)
{
- (*_bfd_error_handler) (_("Dwarf Error: Can't find %s section."), section_name);
+ (*_bfd_error_handler) (_("Dwarf Error: Can't find %s section."),
+ sec->uncompressed_name);
bfd_set_error (bfd_error_bad_value);
return FALSE;
}
if (syms)
{
*section_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL, syms);
+ = bfd_simple_get_relocated_section_contents (abfd, msec, NULL, syms);
if (! *section_buffer)
return FALSE;
}
that the client wants. Validate it here to avoid trouble later. */
if (offset != 0 && offset >= *section_size)
{
- (*_bfd_error_handler) (_("Dwarf Error: Offset (%lu) greater than or equal to %s size (%lu)."),
+ (*_bfd_error_handler) (_("Dwarf Error: Offset (%lu)"
+ " greater than or equal to %s size (%lu)."),
(long) offset, section_name, *section_size);
bfd_set_error (bfd_error_bad_value);
return FALSE;
return TRUE;
}
-/* VERBATIM
- The following function up to the END VERBATIM mark are
- copied directly from dwarf2read.c. */
-
/* Read dwarf information from a buffer. */
static unsigned int
-read_1_byte (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf)
+read_1_byte (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf, bfd_byte *end)
{
+ if (buf + 1 > end)
+ return 0;
return bfd_get_8 (abfd, buf);
}
static int
-read_1_signed_byte (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf)
+read_1_signed_byte (bfd *abfd ATTRIBUTE_UNUSED, bfd_byte *buf, bfd_byte *end)
{
+ if (buf + 1 > end)
+ return 0;
return bfd_get_signed_8 (abfd, buf);
}
static unsigned int
-read_2_bytes (bfd *abfd, bfd_byte *buf)
+read_2_bytes (bfd *abfd, bfd_byte *buf, bfd_byte *end)
{
+ if (buf + 2 > end)
+ return 0;
return bfd_get_16 (abfd, buf);
}
static unsigned int
-read_4_bytes (bfd *abfd, bfd_byte *buf)
+read_4_bytes (bfd *abfd, bfd_byte *buf, bfd_byte *end)
{
+ if (buf + 4 > end)
+ return 0;
return bfd_get_32 (abfd, buf);
}
static bfd_uint64_t
-read_8_bytes (bfd *abfd, bfd_byte *buf)
+read_8_bytes (bfd *abfd, bfd_byte *buf, bfd_byte *end)
{
+ if (buf + 8 > end)
+ return 0;
return bfd_get_64 (abfd, buf);
}
static bfd_byte *
read_n_bytes (bfd *abfd ATTRIBUTE_UNUSED,
bfd_byte *buf,
+ bfd_byte *end,
unsigned int size ATTRIBUTE_UNUSED)
{
+ if (buf + size > end)
+ return NULL;
return buf;
}
+/* Scans a NUL terminated string starting at BUF, returning a pointer to it.
+ Returns the number of characters in the string, *including* the NUL byte,
+ in BYTES_READ_PTR. This value is set even if the function fails. Bytes
+ at or beyond BUF_END will not be read. Returns NULL if there was a
+ problem, or if the string is empty. */
+
static char *
-read_string (bfd *abfd ATTRIBUTE_UNUSED,
- bfd_byte *buf,
- unsigned int *bytes_read_ptr)
+read_string (bfd * abfd ATTRIBUTE_UNUSED,
+ bfd_byte * buf,
+ bfd_byte * buf_end,
+ unsigned int * bytes_read_ptr)
{
- /* Return a pointer to the embedded string. */
- char *str = (char *) buf;
+ bfd_byte *str = buf;
+
+ if (buf >= buf_end)
+ {
+ * bytes_read_ptr = 0;
+ return NULL;
+ }
if (*str == '\0')
{
- *bytes_read_ptr = 1;
+ * bytes_read_ptr = 1;
return NULL;
}
- *bytes_read_ptr = strlen (str) + 1;
- return str;
+ while (buf < buf_end)
+ if (* buf ++ == 0)
+ {
+ * bytes_read_ptr = buf - str;
+ return (char *) str;
+ }
+
+ * bytes_read_ptr = buf - str;
+ return NULL;
}
-/* END VERBATIM */
+/* Reads an offset from BUF and then locates the string at this offset
+ inside the debug string section. Returns a pointer to the string.
+ Returns the number of bytes read from BUF, *not* the length of the string,
+ in BYTES_READ_PTR. This value is set even if the function fails. Bytes
+ at or beyond BUF_END will not be read from BUF. Returns NULL if there was
+ a problem, or if the string is empty. Does not check for NUL termination
+ of the string. */
static char *
read_indirect_string (struct comp_unit * unit,
bfd_byte * buf,
+ bfd_byte * buf_end,
unsigned int * bytes_read_ptr)
{
bfd_uint64_t offset;
struct dwarf2_debug *stash = unit->stash;
char *str;
+ if (buf + unit->offset_size > buf_end)
+ {
+ * bytes_read_ptr = 0;
+ return NULL;
+ }
+
if (unit->offset_size == 4)
- offset = read_4_bytes (unit->abfd, buf);
+ offset = read_4_bytes (unit->abfd, buf, buf_end);
else
- offset = read_8_bytes (unit->abfd, buf);
+ offset = read_8_bytes (unit->abfd, buf, buf_end);
*bytes_read_ptr = unit->offset_size;
- if (! read_section (unit->abfd, debug_str, stash->syms, offset,
+ if (! read_section (unit->abfd, &stash->debug_sections[debug_str],
+ stash->syms, offset,
&stash->dwarf_str_buffer, &stash->dwarf_str_size))
return NULL;
+ if (offset >= stash->dwarf_str_size)
+ return NULL;
str = (char *) stash->dwarf_str_buffer + offset;
if (*str == '\0')
return NULL;
return str;
}
+/* Like read_indirect_string but uses a .debug_str located in
+ an alternate file pointed to by the .gnu_debugaltlink section.
+ Used to impement DW_FORM_GNU_strp_alt. */
+
+static char *
+read_alt_indirect_string (struct comp_unit * unit,
+ bfd_byte * buf,
+ bfd_byte * buf_end,
+ unsigned int * bytes_read_ptr)
+{
+ bfd_uint64_t offset;
+ struct dwarf2_debug *stash = unit->stash;
+ char *str;
+
+ if (buf + unit->offset_size > buf_end)
+ {
+ * bytes_read_ptr = 0;
+ return NULL;
+ }
+
+ if (unit->offset_size == 4)
+ offset = read_4_bytes (unit->abfd, buf, buf_end);
+ else
+ offset = read_8_bytes (unit->abfd, buf, buf_end);
+
+ *bytes_read_ptr = unit->offset_size;
+
+ if (stash->alt_bfd_ptr == NULL)
+ {
+ bfd * debug_bfd;
+ char * debug_filename = bfd_follow_gnu_debugaltlink (unit->abfd, DEBUGDIR);
+
+ if (debug_filename == NULL)
+ return NULL;
+
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || ! bfd_check_format (debug_bfd, bfd_object))
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ return NULL;
+ }
+ stash->alt_bfd_ptr = debug_bfd;
+ }
+
+ if (! read_section (unit->stash->alt_bfd_ptr,
+ stash->debug_sections + debug_str_alt,
+ NULL, /* FIXME: Do we need to load alternate symbols ? */
+ offset,
+ &stash->alt_dwarf_str_buffer,
+ &stash->alt_dwarf_str_size))
+ return NULL;
+
+ if (offset >= stash->alt_dwarf_str_size)
+ return NULL;
+ str = (char *) stash->alt_dwarf_str_buffer + offset;
+ if (*str == '\0')
+ return NULL;
+
+ return str;
+}
+
+/* Resolve an alternate reference from UNIT at OFFSET.
+ Returns a pointer into the loaded alternate CU upon success
+ or NULL upon failure. */
+
+static bfd_byte *
+read_alt_indirect_ref (struct comp_unit * unit,
+ bfd_uint64_t offset)
+{
+ struct dwarf2_debug *stash = unit->stash;
+
+ if (stash->alt_bfd_ptr == NULL)
+ {
+ bfd * debug_bfd;
+ char * debug_filename = bfd_follow_gnu_debugaltlink (unit->abfd, DEBUGDIR);
+
+ if (debug_filename == NULL)
+ return FALSE;
+
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || ! bfd_check_format (debug_bfd, bfd_object))
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ return NULL;
+ }
+ stash->alt_bfd_ptr = debug_bfd;
+ }
+
+ if (! read_section (unit->stash->alt_bfd_ptr,
+ stash->debug_sections + debug_info_alt,
+ NULL, /* FIXME: Do we need to load alternate symbols ? */
+ offset,
+ &stash->alt_dwarf_info_buffer,
+ &stash->alt_dwarf_info_size))
+ return NULL;
+
+ if (offset >= stash->alt_dwarf_info_size)
+ return NULL;
+ return stash->alt_dwarf_info_buffer + offset;
+}
+
static bfd_uint64_t
-read_address (struct comp_unit *unit, bfd_byte *buf)
+read_address (struct comp_unit *unit, bfd_byte *buf, bfd_byte * buf_end)
{
- int signed_vma = get_elf_backend_data (unit->abfd)->sign_extend_vma;
+ int signed_vma = 0;
+
+ if (bfd_get_flavour (unit->abfd) == bfd_target_elf_flavour)
+ signed_vma = get_elf_backend_data (unit->abfd)->sign_extend_vma;
+
+ if (buf + unit->addr_size > buf_end)
+ return 0;
if (signed_vma)
{
{
struct abbrev_info **abbrevs;
bfd_byte *abbrev_ptr;
+ bfd_byte *abbrev_end;
struct abbrev_info *cur_abbrev;
unsigned int abbrev_number, bytes_read, abbrev_name;
unsigned int abbrev_form, hash_number;
bfd_size_type amt;
- if (! read_section (abfd, debug_abbrev, stash->syms, offset,
+ if (! read_section (abfd, &stash->debug_sections[debug_abbrev],
+ stash->syms, offset,
&stash->dwarf_abbrev_buffer, &stash->dwarf_abbrev_size))
return NULL;
+ if (offset >= stash->dwarf_abbrev_size)
+ return NULL;
+
amt = sizeof (struct abbrev_info*) * ABBREV_HASH_SIZE;
abbrevs = (struct abbrev_info **) bfd_zalloc (abfd, amt);
if (abbrevs == NULL)
return NULL;
abbrev_ptr = stash->dwarf_abbrev_buffer + offset;
- abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ abbrev_end = stash->dwarf_abbrev_buffer + stash->dwarf_abbrev_size;
+ abbrev_number = safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
/* Loop until we reach an abbrev number of 0. */
/* Read in abbrev header. */
cur_abbrev->number = abbrev_number;
cur_abbrev->tag = (enum dwarf_tag)
- read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
- cur_abbrev->has_children = read_1_byte (abfd, abbrev_ptr);
+ cur_abbrev->has_children = read_1_byte (abfd, abbrev_ptr, abbrev_end);
abbrev_ptr += 1;
/* Now read in declarations. */
- abbrev_name = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ abbrev_name = safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
- abbrev_form = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ abbrev_form = safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
while (abbrev_name)
= (enum dwarf_attribute) abbrev_name;
cur_abbrev->attrs[cur_abbrev->num_attrs++].form
= (enum dwarf_form) abbrev_form;
- abbrev_name = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ abbrev_name = safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
- abbrev_form = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ abbrev_form = safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
}
if ((unsigned int) (abbrev_ptr - stash->dwarf_abbrev_buffer)
>= stash->dwarf_abbrev_size)
break;
- abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+ abbrev_number = safe_read_leb128 (abfd, abbrev_ptr, &bytes_read, FALSE, abbrev_end);
abbrev_ptr += bytes_read;
- if (lookup_abbrev (abbrev_number,abbrevs) != NULL)
+ if (lookup_abbrev (abbrev_number, abbrevs) != NULL)
break;
}
return abbrevs;
}
-/* Read an attribute value described by an attribute form. */
+/* Returns true if the form is one which has a string value. */
+
+static inline bfd_boolean
+is_str_attr (enum dwarf_form form)
+{
+ return form == DW_FORM_string || form == DW_FORM_strp || form == DW_FORM_GNU_strp_alt;
+}
+
+/* Read and fill in the value of attribute ATTR as described by FORM.
+ Read data starting from INFO_PTR, but never at or beyond INFO_PTR_END.
+ Returns an updated INFO_PTR taking into account the amount of data read. */
static bfd_byte *
-read_attribute_value (struct attribute *attr,
- unsigned form,
- struct comp_unit *unit,
- bfd_byte *info_ptr)
+read_attribute_value (struct attribute * attr,
+ unsigned form,
+ struct comp_unit * unit,
+ bfd_byte * info_ptr,
+ bfd_byte * info_ptr_end)
{
bfd *abfd = unit->abfd;
unsigned int bytes_read;
struct dwarf_block *blk;
bfd_size_type amt;
+ if (info_ptr >= info_ptr_end && form != DW_FORM_flag_present)
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: Info pointer extends beyond end of attributes"));
+ bfd_set_error (bfd_error_bad_value);
+ return info_ptr;
+ }
+
attr->form = (enum dwarf_form) form;
switch (form)
if (unit->version == 3 || unit->version == 4)
{
if (unit->offset_size == 4)
- attr->u.val = read_4_bytes (unit->abfd, info_ptr);
+ attr->u.val = read_4_bytes (unit->abfd, info_ptr, info_ptr_end);
else
- attr->u.val = read_8_bytes (unit->abfd, info_ptr);
+ attr->u.val = read_8_bytes (unit->abfd, info_ptr, info_ptr_end);
info_ptr += unit->offset_size;
break;
}
/* FALLTHROUGH */
case DW_FORM_addr:
- attr->u.val = read_address (unit, info_ptr);
+ attr->u.val = read_address (unit, info_ptr, info_ptr_end);
info_ptr += unit->addr_size;
break;
+ case DW_FORM_GNU_ref_alt:
case DW_FORM_sec_offset:
if (unit->offset_size == 4)
- attr->u.val = read_4_bytes (unit->abfd, info_ptr);
+ attr->u.val = read_4_bytes (unit->abfd, info_ptr, info_ptr_end);
else
- attr->u.val = read_8_bytes (unit->abfd, info_ptr);
+ attr->u.val = read_8_bytes (unit->abfd, info_ptr, info_ptr_end);
info_ptr += unit->offset_size;
break;
case DW_FORM_block2:
blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
if (blk == NULL)
return NULL;
- blk->size = read_2_bytes (abfd, info_ptr);
+ blk->size = read_2_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 2;
- blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+ blk->data = read_n_bytes (abfd, info_ptr, info_ptr_end, blk->size);
info_ptr += blk->size;
attr->u.blk = blk;
break;
blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
if (blk == NULL)
return NULL;
- blk->size = read_4_bytes (abfd, info_ptr);
+ blk->size = read_4_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 4;
- blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+ blk->data = read_n_bytes (abfd, info_ptr, info_ptr_end, blk->size);
info_ptr += blk->size;
attr->u.blk = blk;
break;
case DW_FORM_data2:
- attr->u.val = read_2_bytes (abfd, info_ptr);
+ attr->u.val = read_2_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 2;
break;
case DW_FORM_data4:
- attr->u.val = read_4_bytes (abfd, info_ptr);
+ attr->u.val = read_4_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 4;
break;
case DW_FORM_data8:
- attr->u.val = read_8_bytes (abfd, info_ptr);
+ attr->u.val = read_8_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 8;
break;
case DW_FORM_string:
- attr->u.str = read_string (abfd, info_ptr, &bytes_read);
+ attr->u.str = read_string (abfd, info_ptr, info_ptr_end, &bytes_read);
info_ptr += bytes_read;
break;
case DW_FORM_strp:
- attr->u.str = read_indirect_string (unit, info_ptr, &bytes_read);
+ attr->u.str = read_indirect_string (unit, info_ptr, info_ptr_end, &bytes_read);
+ info_ptr += bytes_read;
+ break;
+ case DW_FORM_GNU_strp_alt:
+ attr->u.str = read_alt_indirect_string (unit, info_ptr, info_ptr_end, &bytes_read);
info_ptr += bytes_read;
break;
case DW_FORM_exprloc:
blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
if (blk == NULL)
return NULL;
- blk->size = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+ blk->size = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, info_ptr_end);
info_ptr += bytes_read;
- blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+ blk->data = read_n_bytes (abfd, info_ptr, info_ptr_end, blk->size);
info_ptr += blk->size;
attr->u.blk = blk;
break;
blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
if (blk == NULL)
return NULL;
- blk->size = read_1_byte (abfd, info_ptr);
+ blk->size = read_1_byte (abfd, info_ptr, info_ptr_end);
info_ptr += 1;
- blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+ blk->data = read_n_bytes (abfd, info_ptr, info_ptr_end, blk->size);
info_ptr += blk->size;
attr->u.blk = blk;
break;
case DW_FORM_data1:
- attr->u.val = read_1_byte (abfd, info_ptr);
+ attr->u.val = read_1_byte (abfd, info_ptr, info_ptr_end);
info_ptr += 1;
break;
case DW_FORM_flag:
- attr->u.val = read_1_byte (abfd, info_ptr);
+ attr->u.val = read_1_byte (abfd, info_ptr, info_ptr_end);
info_ptr += 1;
break;
case DW_FORM_flag_present:
attr->u.val = 1;
break;
case DW_FORM_sdata:
- attr->u.sval = read_signed_leb128 (abfd, info_ptr, &bytes_read);
+ attr->u.sval = safe_read_leb128 (abfd, info_ptr, &bytes_read, TRUE, info_ptr_end);
info_ptr += bytes_read;
break;
case DW_FORM_udata:
- attr->u.val = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+ attr->u.val = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, info_ptr_end);
info_ptr += bytes_read;
break;
case DW_FORM_ref1:
- attr->u.val = read_1_byte (abfd, info_ptr);
+ attr->u.val = read_1_byte (abfd, info_ptr, info_ptr_end);
info_ptr += 1;
break;
case DW_FORM_ref2:
- attr->u.val = read_2_bytes (abfd, info_ptr);
+ attr->u.val = read_2_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 2;
break;
case DW_FORM_ref4:
- attr->u.val = read_4_bytes (abfd, info_ptr);
+ attr->u.val = read_4_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 4;
break;
case DW_FORM_ref8:
- attr->u.val = read_8_bytes (abfd, info_ptr);
+ attr->u.val = read_8_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 8;
break;
case DW_FORM_ref_sig8:
- attr->u.val = read_8_bytes (abfd, info_ptr);
+ attr->u.val = read_8_bytes (abfd, info_ptr, info_ptr_end);
info_ptr += 8;
break;
case DW_FORM_ref_udata:
- attr->u.val = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+ attr->u.val = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, info_ptr_end);
info_ptr += bytes_read;
break;
case DW_FORM_indirect:
- form = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+ form = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, info_ptr_end);
info_ptr += bytes_read;
- info_ptr = read_attribute_value (attr, form, unit, info_ptr);
+ info_ptr = read_attribute_value (attr, form, unit, info_ptr, info_ptr_end);
break;
default:
- (*_bfd_error_handler) (_("Dwarf Error: Invalid or unhandled FORM value: %u."),
+ (*_bfd_error_handler) (_("Dwarf Error: Invalid or unhandled FORM value: %#x."),
form);
bfd_set_error (bfd_error_bad_value);
return NULL;
/* Read an attribute described by an abbreviated attribute. */
static bfd_byte *
-read_attribute (struct attribute *attr,
- struct attr_abbrev *abbrev,
- struct comp_unit *unit,
- bfd_byte *info_ptr)
+read_attribute (struct attribute * attr,
+ struct attr_abbrev * abbrev,
+ struct comp_unit * unit,
+ bfd_byte * info_ptr,
+ bfd_byte * info_ptr_end)
{
attr->name = abbrev->name;
- info_ptr = read_attribute_value (attr, abbrev->form, unit, info_ptr);
+ info_ptr = read_attribute_value (attr, abbrev->form, unit, info_ptr, info_ptr_end);
return info_ptr;
}
+/* Return whether DW_AT_name will return the same as DW_AT_linkage_name
+ for a function. */
+
+static bfd_boolean
+non_mangled (int lang)
+{
+ switch (lang)
+ {
+ default:
+ return FALSE;
+
+ case DW_LANG_C89:
+ case DW_LANG_C:
+ case DW_LANG_Ada83:
+ case DW_LANG_Cobol74:
+ case DW_LANG_Cobol85:
+ case DW_LANG_Fortran77:
+ case DW_LANG_Pascal83:
+ case DW_LANG_C99:
+ case DW_LANG_Ada95:
+ case DW_LANG_PLI:
+ case DW_LANG_UPC:
+ case DW_LANG_C11:
+ return TRUE;
+ }
+}
+
/* Source line information table routines. */
#define FILE_ALLOC_CHUNK 5
char *filename;
unsigned int line;
unsigned int column;
+ unsigned int discriminator;
unsigned char op_index;
unsigned char end_sequence; /* End of (sequential) code sequence. */
};
/* Remember some information about each function. If the function is
inlined (DW_TAG_inlined_subroutine) it may have two additional
attributes, DW_AT_call_file and DW_AT_call_line, which specify the
- source code location where this function was inlined. */
+ source code location where this function was inlined. */
struct funcinfo
{
- struct funcinfo *prev_func; /* Pointer to previous function in list of all functions */
- struct funcinfo *caller_func; /* Pointer to function one scope higher */
- char *caller_file; /* Source location file name where caller_func inlines this func */
- int caller_line; /* Source location line number where caller_func inlines this func */
- char *file; /* Source location file name */
- int line; /* Source location line number */
+ /* Pointer to previous function in list of all functions. */
+ struct funcinfo *prev_func;
+ /* Pointer to function one scope higher. */
+ struct funcinfo *caller_func;
+ /* Source location file name where caller_func inlines this func. */
+ char *caller_file;
+ /* Source location file name. */
+ char *file;
+ /* Source location line number where caller_func inlines this func. */
+ int caller_line;
+ /* Source location line number. */
+ int line;
int tag;
- char *name;
+ bfd_boolean is_linkage;
+ const char *name;
struct arange arange;
- asection *sec; /* Where the symbol is defined */
+ /* Where the symbol is defined. */
+ asection *sec;
};
struct varinfo
char *filename,
unsigned int line,
unsigned int column,
+ unsigned int discriminator,
int end_sequence)
{
bfd_size_type amt = sizeof (struct line_info);
info->op_index = op_index;
info->line = line;
info->column = column;
+ info->discriminator = discriminator;
info->end_sequence = end_sequence;
if (filename && filename[0])
info->prev_line = table->lcl_head->prev_line;
table->lcl_head->prev_line = info;
if (address < seq->low_pc)
- seq->low_pc = address;
+ seq->low_pc = address;
}
return TRUE;
}
char *name;
size_t len;
- if (table->files[file - 1].dir)
+ if (table->files[file - 1].dir
+ /* PR 17512: file: 0317e960. */
+ && table->files[file - 1].dir <= table->num_dirs
+ /* PR 17512: file: 7f3d2e4b. */
+ && table->dirs != NULL)
subdir_name = table->dirs[table->files[file - 1].dir - 1];
if (!subdir_name || !IS_ABSOLUTE_PATH (subdir_name))
}
static bfd_boolean
-arange_add (bfd *abfd, struct arange *first_arange,
+arange_add (const struct comp_unit *unit, struct arange *first_arange,
bfd_vma low_pc, bfd_vma high_pc)
{
struct arange *arange;
- /* If the first arange is empty, use it. */
+ /* Ignore empty ranges. */
+ if (low_pc == high_pc)
+ return TRUE;
+
+ /* If the first arange is empty, use it. */
if (first_arange->high == 0)
{
first_arange->low = low_pc;
/* Need to allocate a new arange and insert it into the arange list.
Order isn't significant, so just insert after the first arange. */
- arange = (struct arange *) bfd_zalloc (abfd, sizeof (*arange));
+ arange = (struct arange *) bfd_alloc (unit->abfd, sizeof (*arange));
if (arange == NULL)
return FALSE;
arange->low = low_pc;
for (n = 1; n < table->num_sequences; n++)
{
if (sequences[n].low_pc < last_high_pc)
- {
+ {
if (sequences[n].last_line->address <= last_high_pc)
/* Skip nested entries. */
continue;
/* Trim overlapping entries. */
sequences[n].low_pc = last_high_pc;
- }
+ }
last_high_pc = sequences[n].last_line->address;
if (n > num_sequences)
- {
- /* Close up the gap. */
- sequences[num_sequences].low_pc = sequences[n].low_pc;
- sequences[num_sequences].last_line = sequences[n].last_line;
- }
+ {
+ /* Close up the gap. */
+ sequences[num_sequences].low_pc = sequences[n].low_pc;
+ sequences[num_sequences].last_line = sequences[n].last_line;
+ }
num_sequences++;
}
unsigned int i, bytes_read, offset_size;
char *cur_file, *cur_dir;
unsigned char op_code, extended_op, adj_opcode;
+ unsigned int exop_len;
bfd_size_type amt;
- if (! read_section (abfd, debug_line, stash->syms, unit->line_offset,
+ if (! read_section (abfd, &stash->debug_sections[debug_line],
+ stash->syms, unit->line_offset,
&stash->dwarf_line_buffer, &stash->dwarf_line_size))
return NULL;
table->lcl_head = NULL;
+ if (stash->dwarf_line_size < 16)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Line info section is too small (%ld)"),
+ (long) stash->dwarf_line_size);
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
line_ptr = stash->dwarf_line_buffer + unit->line_offset;
+ line_end = stash->dwarf_line_buffer + stash->dwarf_line_size;
/* Read in the prologue. */
- lh.total_length = read_4_bytes (abfd, line_ptr);
+ lh.total_length = read_4_bytes (abfd, line_ptr, line_end);
line_ptr += 4;
offset_size = 4;
if (lh.total_length == 0xffffffff)
{
- lh.total_length = read_8_bytes (abfd, line_ptr);
+ lh.total_length = read_8_bytes (abfd, line_ptr, line_end);
line_ptr += 8;
offset_size = 8;
}
else if (lh.total_length == 0 && unit->addr_size == 8)
{
/* Handle (non-standard) 64-bit DWARF2 formats. */
- lh.total_length = read_4_bytes (abfd, line_ptr);
+ lh.total_length = read_4_bytes (abfd, line_ptr, line_end);
line_ptr += 4;
offset_size = 8;
}
+
+ if (lh.total_length > stash->dwarf_line_size)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Line info data is bigger (0x%lx) than the section (0x%lx)"),
+ (long) lh.total_length, (long) stash->dwarf_line_size);
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
+
line_end = line_ptr + lh.total_length;
- lh.version = read_2_bytes (abfd, line_ptr);
+
+ lh.version = read_2_bytes (abfd, line_ptr, line_end);
if (lh.version < 2 || lh.version > 4)
{
(*_bfd_error_handler)
return NULL;
}
line_ptr += 2;
+
+ if (line_ptr + offset_size + (lh.version >=4 ? 6 : 5) >= line_end)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Ran out of room reading prologue"));
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
+
if (offset_size == 4)
- lh.prologue_length = read_4_bytes (abfd, line_ptr);
+ lh.prologue_length = read_4_bytes (abfd, line_ptr, line_end);
else
- lh.prologue_length = read_8_bytes (abfd, line_ptr);
+ lh.prologue_length = read_8_bytes (abfd, line_ptr, line_end);
line_ptr += offset_size;
- lh.minimum_instruction_length = read_1_byte (abfd, line_ptr);
+
+ lh.minimum_instruction_length = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
+
if (lh.version >= 4)
{
- lh.maximum_ops_per_insn = read_1_byte (abfd, line_ptr);
+ lh.maximum_ops_per_insn = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
}
else
lh.maximum_ops_per_insn = 1;
+
if (lh.maximum_ops_per_insn == 0)
{
(*_bfd_error_handler)
bfd_set_error (bfd_error_bad_value);
return NULL;
}
- lh.default_is_stmt = read_1_byte (abfd, line_ptr);
+
+ lh.default_is_stmt = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
- lh.line_base = read_1_signed_byte (abfd, line_ptr);
+
+ lh.line_base = read_1_signed_byte (abfd, line_ptr, line_end);
line_ptr += 1;
- lh.line_range = read_1_byte (abfd, line_ptr);
+
+ lh.line_range = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
- lh.opcode_base = read_1_byte (abfd, line_ptr);
+
+ lh.opcode_base = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
+
+ if (line_ptr + (lh.opcode_base - 1) >= line_end)
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: Ran out of room reading opcodes"));
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
+
amt = lh.opcode_base * sizeof (unsigned char);
lh.standard_opcode_lengths = (unsigned char *) bfd_alloc (abfd, amt);
for (i = 1; i < lh.opcode_base; ++i)
{
- lh.standard_opcode_lengths[i] = read_1_byte (abfd, line_ptr);
+ lh.standard_opcode_lengths[i] = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
}
/* Read directory table. */
- while ((cur_dir = read_string (abfd, line_ptr, &bytes_read)) != NULL)
+ while ((cur_dir = read_string (abfd, line_ptr, line_end, &bytes_read)) != NULL)
{
line_ptr += bytes_read;
line_ptr += bytes_read;
/* Read file name table. */
- while ((cur_file = read_string (abfd, line_ptr, &bytes_read)) != NULL)
+ while ((cur_file = read_string (abfd, line_ptr, line_end, &bytes_read)) != NULL)
{
line_ptr += bytes_read;
table->files[table->num_files].name = cur_file;
table->files[table->num_files].dir =
- read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
- table->files[table->num_files].time =
- read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ table->files[table->num_files].time = safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
- table->files[table->num_files].size =
- read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ table->files[table->num_files].size = safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
table->num_files++;
}
char * filename = table->num_files ? concat_filename (table, 1) : NULL;
unsigned int line = 1;
unsigned int column = 0;
+ unsigned int discriminator = 0;
int is_stmt = lh.default_is_stmt;
int end_sequence = 0;
/* eraxxon@alumni.rice.edu: Against the DWARF2 specs, some
/* Decode the table. */
while (! end_sequence)
{
- op_code = read_1_byte (abfd, line_ptr);
+ op_code = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
if (op_code >= lh.opcode_base)
{
/* Special operand. */
adj_opcode = op_code - lh.opcode_base;
+ if (lh.line_range == 0)
+ goto line_fail;
if (lh.maximum_ops_per_insn == 1)
- address += (adj_opcode / lh.line_range)
- * lh.minimum_instruction_length;
+ address += (adj_opcode / lh.line_range
+ * lh.minimum_instruction_length);
else
{
- address += ((op_index + (adj_opcode / lh.line_range))
- / lh.maximum_ops_per_insn)
- * lh.minimum_instruction_length;
- op_index = (op_index + (adj_opcode / lh.line_range))
- % lh.maximum_ops_per_insn;
+ address += ((op_index + adj_opcode / lh.line_range)
+ / lh.maximum_ops_per_insn
+ * lh.minimum_instruction_length);
+ op_index = ((op_index + adj_opcode / lh.line_range)
+ % lh.maximum_ops_per_insn);
}
line += lh.line_base + (adj_opcode % lh.line_range);
/* Append row to matrix using current values. */
if (!add_line_info (table, address, op_index, filename,
- line, column, 0))
+ line, column, discriminator, 0))
goto line_fail;
+ discriminator = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
else switch (op_code)
{
case DW_LNS_extended_op:
- /* Ignore length. */
- line_ptr += 1;
- extended_op = read_1_byte (abfd, line_ptr);
+ exop_len = safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
+ line_ptr += bytes_read;
+ extended_op = read_1_byte (abfd, line_ptr, line_end);
line_ptr += 1;
switch (extended_op)
{
case DW_LNE_end_sequence:
end_sequence = 1;
- if (!add_line_info (table, address, op_index, filename,
- line, column, end_sequence))
+ if (!add_line_info (table, address, op_index, filename, line,
+ column, discriminator, end_sequence))
goto line_fail;
+ discriminator = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
high_pc = address;
- if (!arange_add (unit->abfd, &unit->arange, low_pc, high_pc))
+ if (!arange_add (unit, &unit->arange, low_pc, high_pc))
goto line_fail;
break;
case DW_LNE_set_address:
- address = read_address (unit, line_ptr);
+ address = read_address (unit, line_ptr, line_end);
op_index = 0;
line_ptr += unit->addr_size;
break;
case DW_LNE_define_file:
- cur_file = read_string (abfd, line_ptr, &bytes_read);
+ cur_file = read_string (abfd, line_ptr, line_end, &bytes_read);
line_ptr += bytes_read;
if ((table->num_files % FILE_ALLOC_CHUNK) == 0)
{
}
table->files[table->num_files].name = cur_file;
table->files[table->num_files].dir =
- read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
table->files[table->num_files].time =
- read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
table->files[table->num_files].size =
- read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
table->num_files++;
break;
case DW_LNE_set_discriminator:
- (void) read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ discriminator =
+ safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
break;
+ case DW_LNE_HP_source_file_correlation:
+ line_ptr += exop_len - 1;
+ break;
default:
- (*_bfd_error_handler) (_("Dwarf Error: mangled line number section."));
+ (*_bfd_error_handler)
+ (_("Dwarf Error: mangled line number section."));
bfd_set_error (bfd_error_bad_value);
line_fail:
if (filename != NULL)
break;
case DW_LNS_copy:
if (!add_line_info (table, address, op_index,
- filename, line, column, 0))
+ filename, line, column, discriminator, 0))
goto line_fail;
+ discriminator = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
break;
case DW_LNS_advance_pc:
if (lh.maximum_ops_per_insn == 1)
- address += lh.minimum_instruction_length
- * read_unsigned_leb128 (abfd, line_ptr,
- &bytes_read);
+ address += (lh.minimum_instruction_length
+ * safe_read_leb128 (abfd, line_ptr, &bytes_read,
+ FALSE, line_end));
else
{
- bfd_vma adjust = read_unsigned_leb128 (abfd, line_ptr,
- &bytes_read);
- address = ((op_index + adjust) / lh.maximum_ops_per_insn)
- * lh.minimum_instruction_length;
+ bfd_vma adjust = safe_read_leb128 (abfd, line_ptr, &bytes_read,
+ FALSE, line_end);
+ address = ((op_index + adjust) / lh.maximum_ops_per_insn
+ * lh.minimum_instruction_length);
op_index = (op_index + adjust) % lh.maximum_ops_per_insn;
}
line_ptr += bytes_read;
break;
case DW_LNS_advance_line:
- line += read_signed_leb128 (abfd, line_ptr, &bytes_read);
+ line += safe_read_leb128 (abfd, line_ptr, &bytes_read, TRUE, line_end);
line_ptr += bytes_read;
break;
case DW_LNS_set_file:
/* The file and directory tables are 0
based, the references are 1 based. */
- file = read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ file = safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
if (filename)
free (filename);
break;
}
case DW_LNS_set_column:
- column = read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ column = safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
break;
case DW_LNS_negate_stmt:
break;
case DW_LNS_const_add_pc:
if (lh.maximum_ops_per_insn == 1)
- address += lh.minimum_instruction_length
- * ((255 - lh.opcode_base) / lh.line_range);
+ address += (lh.minimum_instruction_length
+ * ((255 - lh.opcode_base) / lh.line_range));
else
{
bfd_vma adjust = ((255 - lh.opcode_base) / lh.line_range);
- address += lh.minimum_instruction_length
- * ((op_index + adjust) / lh.maximum_ops_per_insn);
+ address += (lh.minimum_instruction_length
+ * ((op_index + adjust)
+ / lh.maximum_ops_per_insn));
op_index = (op_index + adjust) % lh.maximum_ops_per_insn;
}
break;
case DW_LNS_fixed_advance_pc:
- address += read_2_bytes (abfd, line_ptr);
+ address += read_2_bytes (abfd, line_ptr, line_end);
op_index = 0;
line_ptr += 2;
break;
/* Unknown standard opcode, ignore it. */
for (i = 0; i < lh.standard_opcode_lengths[op_code]; i++)
{
- (void) read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ (void) safe_read_leb128 (abfd, line_ptr, &bytes_read, FALSE, line_end);
line_ptr += bytes_read;
}
break;
return NULL;
}
-/* If ADDR is within TABLE set the output parameters and return TRUE,
- otherwise return FALSE. The output parameters, FILENAME_PTR and
- LINENUMBER_PTR, are pointers to the objects to be filled in. */
+/* If ADDR is within TABLE set the output parameters and return the
+ range of addresses covered by the entry used to fill them out.
+ Otherwise set * FILENAME_PTR to NULL and return 0.
+ The parameters FILENAME_PTR, LINENUMBER_PTR and DISCRIMINATOR_PTR
+ are pointers to the objects to be filled in. */
-static bfd_boolean
+static bfd_vma
lookup_address_in_line_info_table (struct line_info_table *table,
bfd_vma addr,
const char **filename_ptr,
- unsigned int *linenumber_ptr)
+ unsigned int *linenumber_ptr,
+ unsigned int *discriminator_ptr)
{
struct line_sequence *seq = NULL;
struct line_info *each_line;
{
/* Note: seq->last_line should be a descendingly sorted list. */
for (each_line = seq->last_line;
- each_line;
- each_line = each_line->prev_line)
- if (addr >= each_line->address)
- break;
+ each_line;
+ each_line = each_line->prev_line)
+ if (addr >= each_line->address)
+ break;
if (each_line
- && !(each_line->end_sequence || each_line == seq->last_line))
- {
- *filename_ptr = each_line->filename;
- *linenumber_ptr = each_line->line;
- return TRUE;
- }
+ && !(each_line->end_sequence || each_line == seq->last_line))
+ {
+ *filename_ptr = each_line->filename;
+ *linenumber_ptr = each_line->line;
+ if (discriminator_ptr)
+ *discriminator_ptr = each_line->discriminator;
+ return seq->last_line->address - seq->low_pc;
+ }
}
*filename_ptr = NULL;
- return FALSE;
+ return 0;
}
/* Read in the .debug_ranges section for future reference. */
read_debug_ranges (struct comp_unit *unit)
{
struct dwarf2_debug *stash = unit->stash;
- return read_section (unit->abfd, debug_ranges, stash->syms, 0,
+ return read_section (unit->abfd, &stash->debug_sections[debug_ranges],
+ stash->syms, 0,
&stash->dwarf_ranges_buffer, &stash->dwarf_ranges_size);
}
/* Function table functions. */
-/* If ADDR is within TABLE, set FUNCTIONNAME_PTR, and return TRUE.
- Note that we need to find the function that has the smallest
- range that contains ADDR, to handle inlined functions without
- depending upon them being ordered in TABLE by increasing range. */
+/* If ADDR is within UNIT's function tables, set FUNCTION_PTR, and return
+ TRUE. Note that we need to find the function that has the smallest range
+ that contains ADDR, to handle inlined functions without depending upon
+ them being ordered in TABLE by increasing range. */
static bfd_boolean
lookup_address_in_function_table (struct comp_unit *unit,
bfd_vma addr,
- struct funcinfo **function_ptr,
- const char **functionname_ptr)
+ struct funcinfo **function_ptr)
{
struct funcinfo* each_func;
struct funcinfo* best_fit = NULL;
+ bfd_vma best_fit_len = 0;
struct arange *arange;
for (each_func = unit->function_table;
{
if (addr >= arange->low && addr < arange->high)
{
- if (!best_fit ||
- ((arange->high - arange->low) < (best_fit->arange.high - best_fit->arange.low)))
- best_fit = each_func;
+ if (!best_fit
+ || arange->high - arange->low < best_fit_len)
+ {
+ best_fit = each_func;
+ best_fit_len = arange->high - arange->low;
+ }
}
}
}
if (best_fit)
{
- *functionname_ptr = best_fit->name;
*function_ptr = best_fit;
return TRUE;
}
- else
- {
- return FALSE;
- }
+ return FALSE;
}
/* If SYM at ADDR is within function table of UNIT, set FILENAME_PTR
{
struct funcinfo* each_func;
struct funcinfo* best_fit = NULL;
+ bfd_vma best_fit_len = 0;
struct arange *arange;
const char *name = bfd_asymbol_name (sym);
asection *sec = bfd_get_section (sym);
&& each_func->name
&& strcmp (name, each_func->name) == 0
&& (!best_fit
- || ((arange->high - arange->low)
- < (best_fit->arange.high - best_fit->arange.low))))
- best_fit = each_func;
+ || arange->high - arange->low < best_fit_len))
+ {
+ best_fit = each_func;
+ best_fit_len = arange->high - arange->low;
+ }
}
}
static char *
find_abstract_instance_name (struct comp_unit *unit,
- struct attribute *attr_ptr)
+ struct attribute *attr_ptr,
+ bfd_boolean *is_linkage)
{
bfd *abfd = unit->abfd;
bfd_byte *info_ptr;
+ bfd_byte *info_ptr_end;
unsigned int abbrev_number, bytes_read, i;
struct abbrev_info *abbrev;
bfd_uint64_t die_ref = attr_ptr->u.val;
struct attribute attr;
- char *name = 0;
+ char *name = NULL;
/* DW_FORM_ref_addr can reference an entry in a different CU. It
is an offset from the .debug_info section, not the current CU. */
abort ();
info_ptr = unit->sec_info_ptr + die_ref;
+ info_ptr_end = unit->end_ptr;
+
+ /* Now find the CU containing this pointer. */
+ if (info_ptr >= unit->info_ptr_unit && info_ptr < unit->end_ptr)
+ ;
+ else
+ {
+ /* Check other CUs to see if they contain the abbrev. */
+ struct comp_unit * u;
+
+ for (u = unit->prev_unit; u != NULL; u = u->prev_unit)
+ if (info_ptr >= u->info_ptr_unit && info_ptr < u->end_ptr)
+ break;
+
+ if (u == NULL)
+ for (u = unit->next_unit; u != NULL; u = u->next_unit)
+ if (info_ptr >= u->info_ptr_unit && info_ptr < u->end_ptr)
+ break;
+
+ if (u)
+ unit = u;
+ /* else FIXME: What do we do now ? */
+ }
+ }
+ else if (attr_ptr->form == DW_FORM_GNU_ref_alt)
+ {
+ info_ptr = read_alt_indirect_ref (unit, die_ref);
+ if (info_ptr == NULL)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Unable to read alt ref %u."), die_ref);
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
+ info_ptr_end = unit->stash->alt_dwarf_info_buffer + unit->stash->alt_dwarf_info_size;
+
+ /* FIXME: Do we need to locate the correct CU, in a similar
+ fashion to the code in the DW_FORM_ref_addr case above ? */
+ }
+ else
+ {
+ info_ptr = unit->info_ptr_unit + die_ref;
+ info_ptr_end = unit->end_ptr;
}
- else
- info_ptr = unit->info_ptr_unit + die_ref;
- abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+
+ abbrev_number = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, info_ptr_end);
info_ptr += bytes_read;
if (abbrev_number)
abbrev = lookup_abbrev (abbrev_number, unit->abbrevs);
if (! abbrev)
{
- (*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."),
- abbrev_number);
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Could not find abbrev number %u."), abbrev_number);
bfd_set_error (bfd_error_bad_value);
}
else
for (i = 0; i < abbrev->num_attrs; ++i)
{
info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit,
- info_ptr);
+ info_ptr, info_ptr_end);
if (info_ptr == NULL)
break;
switch (attr.name)
case DW_AT_name:
/* Prefer DW_AT_MIPS_linkage_name or DW_AT_linkage_name
over DW_AT_name. */
- if (name == NULL)
- name = attr.u.str;
+ if (name == NULL && is_str_attr (attr.form))
+ {
+ name = attr.u.str;
+ if (non_mangled (unit->lang))
+ *is_linkage = TRUE;
+ }
break;
case DW_AT_specification:
- name = find_abstract_instance_name (unit, &attr);
+ name = find_abstract_instance_name (unit, &attr, is_linkage);
break;
case DW_AT_linkage_name:
case DW_AT_MIPS_linkage_name:
- name = attr.u.str;
+ /* PR 16949: Corrupt debug info can place
+ non-string forms into these attributes. */
+ if (is_str_attr (attr.form))
+ {
+ name = attr.u.str;
+ *is_linkage = TRUE;
+ }
break;
default:
break;
bfd_uint64_t offset)
{
bfd_byte *ranges_ptr;
+ bfd_byte *ranges_end;
bfd_vma base_address = unit->base_address;
if (! unit->stash->dwarf_ranges_buffer)
if (! read_debug_ranges (unit))
return FALSE;
}
+
ranges_ptr = unit->stash->dwarf_ranges_buffer + offset;
+ if (ranges_ptr < unit->stash->dwarf_ranges_buffer)
+ return FALSE;
+ ranges_end = unit->stash->dwarf_ranges_buffer + unit->stash->dwarf_ranges_size;
for (;;)
{
bfd_vma low_pc;
bfd_vma high_pc;
- low_pc = read_address (unit, ranges_ptr);
+ /* PR 17512: file: 62cada7d. */
+ if (ranges_ptr + 2 * unit->addr_size > ranges_end)
+ return FALSE;
+
+ low_pc = read_address (unit, ranges_ptr, ranges_end);
ranges_ptr += unit->addr_size;
- high_pc = read_address (unit, ranges_ptr);
+ high_pc = read_address (unit, ranges_ptr, ranges_end);
ranges_ptr += unit->addr_size;
if (low_pc == 0 && high_pc == 0)
base_address = high_pc;
else
{
- if (!arange_add (unit->abfd, arange,
+ if (!arange_add (unit, arange,
base_address + low_pc, base_address + high_pc))
return FALSE;
}
{
bfd *abfd = unit->abfd;
bfd_byte *info_ptr = unit->first_child_die_ptr;
+ bfd_byte *info_ptr_end = unit->stash->info_ptr_end;
int nesting_level = 1;
struct funcinfo **nested_funcs;
int nested_funcs_size;
can use to set the caller_func field. */
nested_funcs_size = 32;
nested_funcs = (struct funcinfo **)
- bfd_malloc (nested_funcs_size * sizeof (struct funcinfo *));
+ bfd_malloc (nested_funcs_size * sizeof (struct funcinfo *));
if (nested_funcs == NULL)
return FALSE;
nested_funcs[nesting_level] = 0;
struct varinfo *var;
bfd_vma low_pc = 0;
bfd_vma high_pc = 0;
+ bfd_boolean high_pc_relative = FALSE;
- abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+ /* PR 17512: file: 9f405d9d. */
+ if (info_ptr >= info_ptr_end)
+ goto fail;
+
+ abbrev_number = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, info_ptr_end);
info_ptr += bytes_read;
if (! abbrev_number)
for (i = 0; i < abbrev->num_attrs; ++i)
{
- info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr);
+ info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr, info_ptr_end);
if (info_ptr == NULL)
goto fail;
break;
case DW_AT_abstract_origin:
- func->name = find_abstract_instance_name (unit, &attr);
+ case DW_AT_specification:
+ func->name = find_abstract_instance_name (unit, &attr,
+ &func->is_linkage);
break;
case DW_AT_name:
/* Prefer DW_AT_MIPS_linkage_name or DW_AT_linkage_name
over DW_AT_name. */
- if (func->name == NULL)
- func->name = attr.u.str;
+ if (func->name == NULL && is_str_attr (attr.form))
+ {
+ func->name = attr.u.str;
+ if (non_mangled (unit->lang))
+ func->is_linkage = TRUE;
+ }
break;
case DW_AT_linkage_name:
case DW_AT_MIPS_linkage_name:
- func->name = attr.u.str;
+ /* PR 16949: Corrupt debug info can place
+ non-string forms into these attributes. */
+ if (is_str_attr (attr.form))
+ {
+ func->name = attr.u.str;
+ func->is_linkage = TRUE;
+ }
break;
case DW_AT_low_pc:
case DW_AT_high_pc:
high_pc = attr.u.val;
+ high_pc_relative = attr.form != DW_FORM_addr;
break;
case DW_AT_ranges:
}
}
+ if (high_pc_relative)
+ high_pc += low_pc;
+
if (func && high_pc != 0)
{
- if (!arange_add (unit->abfd, &func->arange, low_pc, high_pc))
+ if (!arange_add (unit, &func->arange, low_pc, high_pc))
goto fail;
}
nested_funcs_size *= 2;
tmp = (struct funcinfo **)
- bfd_realloc (nested_funcs,
- (nested_funcs_size * sizeof (struct funcinfo *)));
+ bfd_realloc (nested_funcs,
+ nested_funcs_size * sizeof (struct funcinfo *));
if (tmp == NULL)
goto fail;
nested_funcs = tmp;
bfd_vma low_pc = 0;
bfd_vma high_pc = 0;
bfd *abfd = stash->bfd_ptr;
+ bfd_boolean high_pc_relative = FALSE;
- version = read_2_bytes (abfd, info_ptr);
+ version = read_2_bytes (abfd, info_ptr, end_ptr);
info_ptr += 2;
BFD_ASSERT (offset_size == 4 || offset_size == 8);
if (offset_size == 4)
- abbrev_offset = read_4_bytes (abfd, info_ptr);
+ abbrev_offset = read_4_bytes (abfd, info_ptr, end_ptr);
else
- abbrev_offset = read_8_bytes (abfd, info_ptr);
+ abbrev_offset = read_8_bytes (abfd, info_ptr, end_ptr);
info_ptr += offset_size;
- addr_size = read_1_byte (abfd, info_ptr);
+ addr_size = read_1_byte (abfd, info_ptr, end_ptr);
info_ptr += 1;
if (version != 2 && version != 3 && version != 4)
{
- (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2, 3 and 4 information."), version);
- bfd_set_error (bfd_error_bad_value);
- return 0;
+ /* PR 19872: A version number of 0 probably means that there is padding
+ at the end of the .debug_info section. Gold puts it there when
+ performing an incremental link, for example. So do not generate
+ an error, just return a NULL. */
+ if (version)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: found dwarf version '%u', this reader"
+ " only handles version 2, 3 and 4 information."), version);
+ bfd_set_error (bfd_error_bad_value);
+ }
+ return NULL;
}
if (addr_size > sizeof (bfd_vma))
{
- (*_bfd_error_handler) (_("Dwarf Error: found address size '%u', this reader can not handle sizes greater than '%u'."),
- addr_size,
- (unsigned int) sizeof (bfd_vma));
+ (*_bfd_error_handler)
+ (_("Dwarf Error: found address size '%u', this reader"
+ " can not handle sizes greater than '%u'."),
+ addr_size,
+ (unsigned int) sizeof (bfd_vma));
bfd_set_error (bfd_error_bad_value);
- return 0;
+ return NULL;
}
if (addr_size != 2 && addr_size != 4 && addr_size != 8)
{
- (*_bfd_error_handler) ("Dwarf Error: found address size '%u', this reader can only handle address sizes '2', '4' and '8'.", addr_size);
+ (*_bfd_error_handler)
+ ("Dwarf Error: found address size '%u', this reader"
+ " can only handle address sizes '2', '4' and '8'.", addr_size);
bfd_set_error (bfd_error_bad_value);
- return 0;
+ return NULL;
}
/* Read the abbrevs for this compilation unit into a table. */
abbrevs = read_abbrevs (abfd, abbrev_offset, stash);
if (! abbrevs)
- return 0;
+ return NULL;
- abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+ abbrev_number = safe_read_leb128 (abfd, info_ptr, &bytes_read, FALSE, end_ptr);
info_ptr += bytes_read;
if (! abbrev_number)
{
- (*_bfd_error_handler) (_("Dwarf Error: Bad abbrev number: %u."),
- abbrev_number);
- bfd_set_error (bfd_error_bad_value);
- return 0;
+ /* PR 19872: An abbrev number of 0 probably means that there is padding
+ at the end of the .debug_abbrev section. Gold puts it there when
+ performing an incremental link, for example. So do not generate
+ an error, just return a NULL. */
+ return NULL;
}
abbrev = lookup_abbrev (abbrev_number, abbrevs);
if (! abbrev)
{
(*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."),
- abbrev_number);
+ abbrev_number);
bfd_set_error (bfd_error_bad_value);
- return 0;
+ return NULL;
}
amt = sizeof (struct comp_unit);
for (i = 0; i < abbrev->num_attrs; ++i)
{
- info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr);
+ info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr, end_ptr);
if (info_ptr == NULL)
return NULL;
/* If the compilation unit DIE has a DW_AT_low_pc attribute,
this is the base address to use when reading location
lists or range lists. */
- unit->base_address = low_pc;
+ if (abbrev->tag == DW_TAG_compile_unit)
+ unit->base_address = low_pc;
break;
case DW_AT_high_pc:
high_pc = attr.u.val;
+ high_pc_relative = attr.form != DW_FORM_addr;
break;
case DW_AT_ranges:
case DW_AT_comp_dir:
{
char *comp_dir = attr.u.str;
+
+ /* PR 17512: file: 1fe726be. */
+ if (! is_str_attr (attr.form))
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: DW_AT_comp_dir attribute encountered with a non-string form."));
+ comp_dir = NULL;
+ }
+
if (comp_dir)
{
/* Irix 6.2 native cc prepends <machine>.: to the compilation
break;
}
+ case DW_AT_language:
+ unit->lang = attr.u.val;
+ break;
+
default:
break;
}
}
+ if (high_pc_relative)
+ high_pc += low_pc;
if (high_pc != 0)
{
- if (!arange_add (unit->abfd, &unit->arange, low_pc, high_pc))
+ if (!arange_add (unit, &unit->arange, low_pc, high_pc))
return NULL;
}
/* If UNIT contains ADDR, set the output parameters to the values for
the line containing ADDR. The output parameters, FILENAME_PTR,
- FUNCTIONNAME_PTR, and LINENUMBER_PTR, are pointers to the objects
+ FUNCTION_PTR, and LINENUMBER_PTR, are pointers to the objects
to be filled in.
- Return TRUE if UNIT contains ADDR, and no errors were encountered;
- FALSE otherwise. */
+ Returns the range of addresses covered by the entry that was used
+ to fill in *LINENUMBER_PTR or 0 if it was not filled in. */
-static bfd_boolean
+static bfd_vma
comp_unit_find_nearest_line (struct comp_unit *unit,
bfd_vma addr,
const char **filename_ptr,
- const char **functionname_ptr,
+ struct funcinfo **function_ptr,
unsigned int *linenumber_ptr,
+ unsigned int *discriminator_ptr,
struct dwarf2_debug *stash)
{
- bfd_boolean line_p;
bfd_boolean func_p;
- struct funcinfo *function;
if (unit->error)
return FALSE;
}
}
- function = NULL;
- func_p = lookup_address_in_function_table (unit, addr,
- &function, functionname_ptr);
- if (func_p && (function->tag == DW_TAG_inlined_subroutine))
- stash->inliner_chain = function;
- line_p = lookup_address_in_line_info_table (unit->line_table, addr,
- filename_ptr,
- linenumber_ptr);
- return line_p || func_p;
+ *function_ptr = NULL;
+ func_p = lookup_address_in_function_table (unit, addr, function_ptr);
+ if (func_p && (*function_ptr)->tag == DW_TAG_inlined_subroutine)
+ stash->inliner_chain = *function_ptr;
+
+ return lookup_address_in_line_info_table (unit->line_table, addr,
+ filename_ptr,
+ linenumber_ptr,
+ discriminator_ptr);
}
/* Check to see if line info is already decoded in a comp_unit.
/* Locate a section in a BFD containing debugging info. The search starts
from the section after AFTER_SEC, or from the first section in the BFD if
AFTER_SEC is NULL. The search works by examining the names of the
- sections. There are two permissiable names. The first is .debug_info.
- This is the standard DWARF2 name. The second is a prefix .gnu.linkonce.wi.
+ sections. There are three permissiable names. The first two are given
+ by DEBUG_SECTIONS[debug_info] (whose standard DWARF2 names are .debug_info
+ and .zdebug_info). The third is a prefix .gnu.linkonce.wi.
This is a variation on the .debug_info section which has a checksum
describing the contents appended onto the name. This allows the linker to
identify and discard duplicate debugging sections for different
compilation units. */
-#define DWARF2_DEBUG_INFO ".debug_info"
-#define DWARF2_COMPRESSED_DEBUG_INFO ".zdebug_info"
#define GNU_LINKONCE_INFO ".gnu.linkonce.wi."
static asection *
-find_debug_info (bfd *abfd, asection *after_sec)
+find_debug_info (bfd *abfd, const struct dwarf_debug_section *debug_sections,
+ asection *after_sec)
{
- asection * msec;
+ asection *msec;
+ const char *look;
+
+ if (after_sec == NULL)
+ {
+ look = debug_sections[debug_info].uncompressed_name;
+ msec = bfd_get_section_by_name (abfd, look);
+ if (msec != NULL)
+ return msec;
+
+ look = debug_sections[debug_info].compressed_name;
+ if (look != NULL)
+ {
+ msec = bfd_get_section_by_name (abfd, look);
+ if (msec != NULL)
+ return msec;
+ }
- msec = after_sec != NULL ? after_sec->next : abfd->sections;
+ for (msec = abfd->sections; msec != NULL; msec = msec->next)
+ if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO))
+ return msec;
- while (msec)
+ return NULL;
+ }
+
+ for (msec = after_sec->next; msec != NULL; msec = msec->next)
{
- if (strcmp (msec->name, DWARF2_DEBUG_INFO) == 0)
+ look = debug_sections[debug_info].uncompressed_name;
+ if (strcmp (msec->name, look) == 0)
return msec;
- if (strcmp (msec->name, DWARF2_COMPRESSED_DEBUG_INFO) == 0)
+ look = debug_sections[debug_info].compressed_name;
+ if (look != NULL && strcmp (msec->name, look) == 0)
return msec;
if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO))
return msec;
-
- msec = msec->next;
}
return NULL;
}
+/* Transfer VMAs from object file to separate debug file. */
+
+static void
+set_debug_vma (bfd *orig_bfd, bfd *debug_bfd)
+{
+ asection *s, *d;
+
+ for (s = orig_bfd->sections, d = debug_bfd->sections;
+ s != NULL && d != NULL;
+ s = s->next, d = d->next)
+ {
+ if ((d->flags & SEC_DEBUGGING) != 0)
+ break;
+ /* ??? Assumes 1-1 correspondence between sections in the
+ two files. */
+ if (strcmp (s->name, d->name) == 0)
+ {
+ d->output_section = s->output_section;
+ d->output_offset = s->output_offset;
+ d->vma = s->vma;
+ }
+ }
+}
+
/* Unset vmas for adjusted sections in STASH. */
static void
unset_sections (struct dwarf2_debug *stash)
{
- unsigned int i;
+ int i;
struct adjusted_section *p;
i = stash->adjusted_section_count;
p->section->vma = 0;
}
-/* Set unique VMAs for loadable and DWARF sections in ABFD and save
- VMAs in STASH for unset_sections. */
+/* Set VMAs for allocated and .debug_info sections in ORIG_BFD, a
+ relocatable object file. VMAs are normally all zero in relocatable
+ object files, so if we want to distinguish locations in sections by
+ address we need to set VMAs so the sections do not overlap. We
+ also set VMA on .debug_info so that when we have multiple
+ .debug_info sections (or the linkonce variant) they also do not
+ overlap. The multiple .debug_info sections make up a single
+ logical section. ??? We should probably do the same for other
+ debug sections. */
static bfd_boolean
-place_sections (bfd *abfd, struct dwarf2_debug *stash)
+place_sections (bfd *orig_bfd, struct dwarf2_debug *stash)
{
+ bfd *abfd;
struct adjusted_section *p;
- unsigned int i;
+ int i;
+ const char *debug_info_name;
if (stash->adjusted_section_count != 0)
{
p = stash->adjusted_sections;
for (; i > 0; i--, p++)
p->section->vma = p->adj_vma;
+ return TRUE;
}
- else
+
+ debug_info_name = stash->debug_sections[debug_info].uncompressed_name;
+ i = 0;
+ abfd = orig_bfd;
+ while (1)
{
asection *sect;
- bfd_vma last_vma = 0, last_dwarf = 0;
- bfd_size_type amt;
- i = 0;
for (sect = abfd->sections; sect != NULL; sect = sect->next)
{
- bfd_size_type sz;
int is_debug_info;
- if (sect->vma != 0)
+ if ((sect->output_section != NULL
+ && sect->output_section != sect
+ && (sect->flags & SEC_DEBUGGING) == 0)
+ || sect->vma != 0)
continue;
- /* We need to adjust the VMAs of any .debug_info sections.
- Skip compressed ones, since no relocations could target
- them - they should not appear in object files anyway. */
- if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0)
- is_debug_info = 1;
- else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO))
- is_debug_info = 1;
- else
- is_debug_info = 0;
+ is_debug_info = (strcmp (sect->name, debug_info_name) == 0
+ || CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO));
- if (!is_debug_info && (sect->flags & SEC_LOAD) == 0)
- continue;
-
- sz = sect->rawsize ? sect->rawsize : sect->size;
- if (sz == 0)
+ if (!((sect->flags & SEC_ALLOC) != 0 && abfd == orig_bfd)
+ && !is_debug_info)
continue;
i++;
}
+ if (abfd == stash->bfd_ptr)
+ break;
+ abfd = stash->bfd_ptr;
+ }
- amt = i * sizeof (struct adjusted_section);
- p = (struct adjusted_section *) bfd_zalloc (abfd, amt);
- if (! p)
+ if (i <= 1)
+ stash->adjusted_section_count = -1;
+ else
+ {
+ bfd_vma last_vma = 0, last_dwarf = 0;
+ bfd_size_type amt = i * sizeof (struct adjusted_section);
+
+ p = (struct adjusted_section *) bfd_malloc (amt);
+ if (p == NULL)
return FALSE;
stash->adjusted_sections = p;
stash->adjusted_section_count = i;
- for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ abfd = orig_bfd;
+ while (1)
{
- bfd_size_type sz;
- int is_debug_info;
+ asection *sect;
- if (sect->vma != 0)
- continue;
+ for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ {
+ bfd_size_type sz;
+ int is_debug_info;
- /* We need to adjust the VMAs of any .debug_info sections.
- Skip compressed ones, since no relocations could target
- them - they should not appear in object files anyway. */
- if (strcmp (sect->name, DWARF2_DEBUG_INFO) == 0)
- is_debug_info = 1;
- else if (CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO))
- is_debug_info = 1;
- else
- is_debug_info = 0;
+ if ((sect->output_section != NULL
+ && sect->output_section != sect
+ && (sect->flags & SEC_DEBUGGING) == 0)
+ || sect->vma != 0)
+ continue;
- if (!is_debug_info && (sect->flags & SEC_LOAD) == 0)
- continue;
+ is_debug_info = (strcmp (sect->name, debug_info_name) == 0
+ || CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO));
- sz = sect->rawsize ? sect->rawsize : sect->size;
- if (sz == 0)
- continue;
+ if (!((sect->flags & SEC_ALLOC) != 0 && abfd == orig_bfd)
+ && !is_debug_info)
+ continue;
- p->section = sect;
- if (is_debug_info)
- {
- BFD_ASSERT (sect->alignment_power == 0);
- sect->vma = last_dwarf;
- last_dwarf += sz;
- }
- else if (last_vma != 0)
- {
- /* Align the new address to the current section
- alignment. */
- last_vma = ((last_vma
- + ~((bfd_vma) -1 << sect->alignment_power))
- & ((bfd_vma) -1 << sect->alignment_power));
- sect->vma = last_vma;
- last_vma += sect->vma + sz;
- }
- else
- last_vma += sect->vma + sz;
+ sz = sect->rawsize ? sect->rawsize : sect->size;
- p->adj_vma = sect->vma;
+ if (is_debug_info)
+ {
+ BFD_ASSERT (sect->alignment_power == 0);
+ sect->vma = last_dwarf;
+ last_dwarf += sz;
+ }
+ else
+ {
+ /* Align the new address to the current section
+ alignment. */
+ last_vma = ((last_vma
+ + ~(-((bfd_vma) 1 << sect->alignment_power)))
+ & (-((bfd_vma) 1 << sect->alignment_power)));
+ sect->vma = last_vma;
+ last_vma += sz;
+ }
- p++;
+ p->section = sect;
+ p->adj_vma = sect->vma;
+ p++;
+ }
+ if (abfd == stash->bfd_ptr)
+ break;
+ abfd = stash->bfd_ptr;
}
}
+ if (orig_bfd != stash->bfd_ptr)
+ set_debug_vma (orig_bfd, stash->bfd_ptr);
+
return TRUE;
}
{
struct funcinfo* each_func;
struct funcinfo* best_fit = NULL;
+ bfd_vma best_fit_len = 0;
struct info_list_node *node;
struct arange *arange;
const char *name = bfd_asymbol_name (sym);
&& addr >= arange->low
&& addr < arange->high
&& (!best_fit
- || ((arange->high - arange->low)
- < (best_fit->arange.high - best_fit->arange.low))))
- best_fit = each_func;
+ || arange->high - arange->low < best_fit_len))
+ {
+ best_fit = each_func;
+ best_fit_len = arange->high - arange->low;
+ }
}
}
filename_ptr, linenumber_ptr);
}
+/* Save current section VMAs. */
+
+static bfd_boolean
+save_section_vma (const bfd *abfd, struct dwarf2_debug *stash)
+{
+ asection *s;
+ unsigned int i;
+
+ if (abfd->section_count == 0)
+ return TRUE;
+ stash->sec_vma = bfd_malloc (sizeof (*stash->sec_vma) * abfd->section_count);
+ if (stash->sec_vma == NULL)
+ return FALSE;
+ for (i = 0, s = abfd->sections; i < abfd->section_count; i++, s = s->next)
+ {
+ if (s->output_section != NULL)
+ stash->sec_vma[i] = s->output_section->vma + s->output_offset;
+ else
+ stash->sec_vma[i] = s->vma;
+ }
+ return TRUE;
+}
+
+/* Compare current section VMAs against those at the time the stash
+ was created. If find_nearest_line is used in linker warnings or
+ errors early in the link process, the debug info stash will be
+ invalid for later calls. This is because we relocate debug info
+ sections, so the stashed section contents depend on symbol values,
+ which in turn depend on section VMAs. */
+
+static bfd_boolean
+section_vma_same (const bfd *abfd, const struct dwarf2_debug *stash)
+{
+ asection *s;
+ unsigned int i;
+
+ for (i = 0, s = abfd->sections; i < abfd->section_count; i++, s = s->next)
+ {
+ bfd_vma vma;
+
+ if (s->output_section != NULL)
+ vma = s->output_section->vma + s->output_offset;
+ else
+ vma = s->vma;
+ if (vma != stash->sec_vma[i])
+ return FALSE;
+ }
+ return TRUE;
+}
+
+/* Read debug information from DEBUG_BFD when DEBUG_BFD is specified.
+ If DEBUG_BFD is not specified, we read debug information from ABFD
+ or its gnu_debuglink. The results will be stored in PINFO.
+ The function returns TRUE iff debug information is ready. */
+
+bfd_boolean
+_bfd_dwarf2_slurp_debug_info (bfd *abfd, bfd *debug_bfd,
+ const struct dwarf_debug_section *debug_sections,
+ asymbol **symbols,
+ void **pinfo,
+ bfd_boolean do_place)
+{
+ bfd_size_type amt = sizeof (struct dwarf2_debug);
+ bfd_size_type total_size;
+ asection *msec;
+ struct dwarf2_debug *stash = (struct dwarf2_debug *) *pinfo;
+
+ if (stash != NULL)
+ {
+ if (section_vma_same (abfd, stash))
+ return TRUE;
+ _bfd_dwarf2_cleanup_debug_info (abfd, pinfo);
+ memset (stash, 0, amt);
+ }
+ else
+ {
+ stash = (struct dwarf2_debug *) bfd_zalloc (abfd, amt);
+ if (! stash)
+ return FALSE;
+ }
+ stash->debug_sections = debug_sections;
+ stash->syms = symbols;
+ if (!save_section_vma (abfd, stash))
+ return FALSE;
+
+ *pinfo = stash;
+
+ if (debug_bfd == NULL)
+ debug_bfd = abfd;
+
+ msec = find_debug_info (debug_bfd, debug_sections, NULL);
+ if (msec == NULL && abfd == debug_bfd)
+ {
+ char * debug_filename = bfd_follow_gnu_debuglink (abfd, DEBUGDIR);
+
+ if (debug_filename == NULL)
+ /* No dwarf2 info, and no gnu_debuglink to follow.
+ Note that at this point the stash has been allocated, but
+ contains zeros. This lets future calls to this function
+ fail more quickly. */
+ return FALSE;
+
+ /* Set BFD_DECOMPRESS to decompress debug sections. */
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || !(debug_bfd->flags |= BFD_DECOMPRESS,
+ bfd_check_format (debug_bfd, bfd_object))
+ || (msec = find_debug_info (debug_bfd,
+ debug_sections, NULL)) == NULL
+ || !bfd_generic_link_read_symbols (debug_bfd))
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ return FALSE;
+ }
+
+ symbols = bfd_get_outsymbols (debug_bfd);
+ stash->syms = symbols;
+ stash->close_on_cleanup = TRUE;
+ }
+ stash->bfd_ptr = debug_bfd;
+
+ if (do_place
+ && !place_sections (abfd, stash))
+ return FALSE;
+
+ /* There can be more than one DWARF2 info section in a BFD these
+ days. First handle the easy case when there's only one. If
+ there's more than one, try case two: none of the sections is
+ compressed. In that case, read them all in and produce one
+ large stash. We do this in two passes - in the first pass we
+ just accumulate the section sizes, and in the second pass we
+ read in the section's contents. (The allows us to avoid
+ reallocing the data as we add sections to the stash.) If
+ some or all sections are compressed, then do things the slow
+ way, with a bunch of reallocs. */
+
+ if (! find_debug_info (debug_bfd, debug_sections, msec))
+ {
+ /* Case 1: only one info section. */
+ total_size = msec->size;
+ if (! read_section (debug_bfd, &stash->debug_sections[debug_info],
+ symbols, 0,
+ &stash->info_ptr_memory, &total_size))
+ return FALSE;
+ }
+ else
+ {
+ /* Case 2: multiple sections. */
+ for (total_size = 0;
+ msec;
+ msec = find_debug_info (debug_bfd, debug_sections, msec))
+ total_size += msec->size;
+
+ stash->info_ptr_memory = (bfd_byte *) bfd_malloc (total_size);
+ if (stash->info_ptr_memory == NULL)
+ return FALSE;
+
+ total_size = 0;
+ for (msec = find_debug_info (debug_bfd, debug_sections, NULL);
+ msec;
+ msec = find_debug_info (debug_bfd, debug_sections, msec))
+ {
+ bfd_size_type size;
+
+ size = msec->size;
+ if (size == 0)
+ continue;
+
+ if (!(bfd_simple_get_relocated_section_contents
+ (debug_bfd, msec, stash->info_ptr_memory + total_size,
+ symbols)))
+ return FALSE;
+
+ total_size += size;
+ }
+ }
+
+ stash->info_ptr = stash->info_ptr_memory;
+ stash->info_ptr_end = stash->info_ptr + total_size;
+ stash->sec = find_debug_info (debug_bfd, debug_sections, NULL);
+ stash->sec_info_ptr = stash->info_ptr;
+ return TRUE;
+}
+
+/* Scan the debug information in PINFO looking for a DW_TAG_subprogram
+ abbrev with a DW_AT_low_pc attached to it. Then lookup that same
+ symbol in SYMBOLS and return the difference between the low_pc and
+ the symbol's address. Returns 0 if no suitable symbol could be found. */
+
+bfd_signed_vma
+_bfd_dwarf2_find_symbol_bias (asymbol ** symbols, void ** pinfo)
+{
+ struct dwarf2_debug *stash;
+ struct comp_unit * unit;
+
+ stash = (struct dwarf2_debug *) *pinfo;
+
+ if (stash == NULL)
+ return 0;
+
+ for (unit = stash->all_comp_units; unit; unit = unit->next_unit)
+ {
+ struct funcinfo * func;
+
+ if (unit->function_table == NULL)
+ {
+ if (unit->line_table == NULL)
+ unit->line_table = decode_line_info (unit, stash);
+ if (unit->line_table != NULL)
+ scan_unit_for_symbols (unit);
+ }
+
+ for (func = unit->function_table; func != NULL; func = func->prev_func)
+ if (func->name && func->arange.low)
+ {
+ asymbol ** psym;
+
+ /* FIXME: Do we need to scan the aranges looking for the lowest pc value ? */
+
+ for (psym = symbols; * psym != NULL; psym++)
+ {
+ asymbol * sym = * psym;
+
+ if (sym->flags & BSF_FUNCTION
+ && sym->section != NULL
+ && strcmp (sym->name, func->name) == 0)
+ return ((bfd_signed_vma) func->arange.low) -
+ ((bfd_signed_vma) (sym->value + sym->section->vma));
+ }
+ }
+ }
+
+ return 0;
+}
+
/* Find the source code location of SYMBOL. If SYMBOL is NULL
then find the nearest source code location corresponding to
the address SECTION + OFFSET.
FILENAME_PTR and LINENUMBER_PTR. In the case where SYMBOL was
NULL the FUNCTIONNAME_PTR is also filled in.
SYMBOLS contains the symbol table for ABFD.
+ DEBUG_SECTIONS contains the name of the dwarf debug sections.
ADDR_SIZE is the number of bytes in the initial .debug_info length
field and in the abbreviation offset, or zero to indicate that the
default value should be used. */
-static bfd_boolean
-find_line (bfd *abfd,
- asection *section,
- bfd_vma offset,
- asymbol *symbol,
- asymbol **symbols,
- const char **filename_ptr,
- const char **functionname_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
+bfd_boolean
+_bfd_dwarf2_find_nearest_line (bfd *abfd,
+ asymbol **symbols,
+ asymbol *symbol,
+ asection *section,
+ bfd_vma offset,
+ const char **filename_ptr,
+ const char **functionname_ptr,
+ unsigned int *linenumber_ptr,
+ unsigned int *discriminator_ptr,
+ const struct dwarf_debug_section *debug_sections,
+ unsigned int addr_size,
+ void **pinfo)
{
/* Read each compilation unit from the section .debug_info, and check
to see if it contains the address we are searching for. If yes,
/* What address are we looking for? */
bfd_vma addr;
struct comp_unit* each;
- bfd_vma found = FALSE;
+ struct funcinfo *function = NULL;
+ bfd_boolean found = FALSE;
bfd_boolean do_line;
- stash = (struct dwarf2_debug *) *pinfo;
-
- if (! stash)
- {
- bfd_size_type amt = sizeof (struct dwarf2_debug);
+ *filename_ptr = NULL;
+ if (functionname_ptr != NULL)
+ *functionname_ptr = NULL;
+ *linenumber_ptr = 0;
+ if (discriminator_ptr)
+ *discriminator_ptr = 0;
- stash = (struct dwarf2_debug *) bfd_zalloc (abfd, amt);
- if (! stash)
- return FALSE;
- }
+ if (! _bfd_dwarf2_slurp_debug_info (abfd, NULL, debug_sections,
+ symbols, pinfo,
+ (abfd->flags & (EXEC_P | DYNAMIC)) == 0))
+ return FALSE;
- /* In a relocatable file, 2 functions may have the same address.
- We change the section vma so that they won't overlap. */
- if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0)
- {
- if (! place_sections (abfd, stash))
- return FALSE;
- }
+ stash = (struct dwarf2_debug *) *pinfo;
- do_line = (section == NULL
- && offset == 0
- && functionname_ptr == NULL
- && symbol != NULL);
+ do_line = symbol != NULL;
if (do_line)
{
- addr = symbol->value;
+ BFD_ASSERT (section == NULL && offset == 0 && functionname_ptr == NULL);
section = bfd_get_section (symbol);
+ addr = symbol->value;
}
- else if (section != NULL
- && functionname_ptr != NULL
- && symbol == NULL)
- addr = offset;
else
- abort ();
+ {
+ BFD_ASSERT (section != NULL && functionname_ptr != NULL);
+ addr = offset;
+ }
if (section->output_section)
addr += section->output_section->vma + section->output_offset;
else
addr += section->vma;
- *filename_ptr = NULL;
- if (! do_line)
- *functionname_ptr = NULL;
- *linenumber_ptr = 0;
-
- if (! *pinfo)
- {
- bfd *debug_bfd;
- bfd_size_type total_size;
- asection *msec;
-
- *pinfo = stash;
-
- msec = find_debug_info (abfd, NULL);
- if (msec == NULL)
- {
- char * debug_filename = bfd_follow_gnu_debuglink (abfd, DEBUGDIR);
-
- if (debug_filename == NULL)
- /* No dwarf2 info, and no gnu_debuglink to follow.
- Note that at this point the stash has been allocated, but
- contains zeros. This lets future calls to this function
- fail more quickly. */
- goto done;
-
- if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
- || ! bfd_check_format (debug_bfd, bfd_object)
- || (msec = find_debug_info (debug_bfd, NULL)) == NULL)
- {
- if (debug_bfd)
- bfd_close (debug_bfd);
- /* FIXME: Should we report our failure to follow the debuglink ? */
- free (debug_filename);
- goto done;
- }
- }
- else
- debug_bfd = abfd;
-
- /* There can be more than one DWARF2 info section in a BFD these
- days. First handle the easy case when there's only one. If
- there's more than one, try case two: none of the sections is
- compressed. In that case, read them all in and produce one
- large stash. We do this in two passes - in the first pass we
- just accumulate the section sizes, and in the second pass we
- read in the section's contents. (The allows us to avoid
- reallocing the data as we add sections to the stash.) If
- some or all sections are compressed, then do things the slow
- way, with a bunch of reallocs. */
-
- if (! find_debug_info (debug_bfd, msec))
- {
- /* Case 1: only one info section. */
- total_size = msec->size;
- if (! read_section (debug_bfd, debug_info, symbols, 0,
- &stash->info_ptr_memory, &total_size))
- goto done;
- }
- else
- {
- /* Case 2: multiple sections. */
- for (total_size = 0; msec; msec = find_debug_info (debug_bfd, msec))
- total_size += msec->size;
-
- stash->info_ptr_memory = (bfd_byte *) bfd_malloc (total_size);
- if (stash->info_ptr_memory == NULL)
- goto done;
-
- total_size = 0;
- for (msec = find_debug_info (debug_bfd, NULL);
- msec;
- msec = find_debug_info (debug_bfd, msec))
- {
- bfd_size_type size;
-
- size = msec->size;
- if (size == 0)
- continue;
-
- if (!(bfd_simple_get_relocated_section_contents
- (debug_bfd, msec, stash->info_ptr_memory + total_size,
- symbols)))
- goto done;
-
- total_size += size;
- }
- }
-
- stash->info_ptr = stash->info_ptr_memory;
- stash->info_ptr_end = stash->info_ptr + total_size;
- stash->sec = find_debug_info (debug_bfd, NULL);
- stash->sec_info_ptr = stash->info_ptr;
- stash->syms = symbols;
- stash->bfd_ptr = debug_bfd;
- }
/* A null info_ptr indicates that there is no dwarf2 info
(or that an error occured while setting up the stash). */
if (! stash->info_ptr)
- goto done;
+ return FALSE;
stash->inliner_chain = NULL;
/* Check the previously read comp. units first. */
for (each = stash->all_comp_units; each; each = each->next_unit)
if ((symbol->flags & BSF_FUNCTION) == 0
+ || each->arange.high == 0
|| comp_unit_contains_address (each, addr))
{
found = comp_unit_find_line (each, symbol, addr, filename_ptr,
}
else
{
+ bfd_vma min_range = (bfd_vma) -1;
+ const char * local_filename = NULL;
+ struct funcinfo *local_function = NULL;
+ unsigned int local_linenumber = 0;
+ unsigned int local_discriminator = 0;
+
for (each = stash->all_comp_units; each; each = each->next_unit)
{
- found = (comp_unit_contains_address (each, addr)
- && comp_unit_find_nearest_line (each, addr,
- filename_ptr,
- functionname_ptr,
- linenumber_ptr,
- stash));
+ bfd_vma range = (bfd_vma) -1;
+
+ found = ((each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ && (range = comp_unit_find_nearest_line (each, addr,
+ & local_filename,
+ & local_function,
+ & local_linenumber,
+ & local_discriminator,
+ stash)) != 0);
if (found)
- goto done;
+ {
+ /* PRs 15935 15994: Bogus debug information may have provided us
+ with an erroneous match. We attempt to counter this by
+ selecting the match that has the smallest address range
+ associated with it. (We are assuming that corrupt debug info
+ will tend to result in extra large address ranges rather than
+ extra small ranges).
+
+ This does mean that we scan through all of the CUs associated
+ with the bfd each time this function is called. But this does
+ have the benefit of producing consistent results every time the
+ function is called. */
+ if (range <= min_range)
+ {
+ if (filename_ptr && local_filename)
+ * filename_ptr = local_filename;
+ if (local_function)
+ function = local_function;
+ if (discriminator_ptr && local_discriminator)
+ * discriminator_ptr = local_discriminator;
+ if (local_linenumber)
+ * linenumber_ptr = local_linenumber;
+ min_range = range;
+ }
+ }
+ }
+
+ if (* linenumber_ptr)
+ {
+ found = TRUE;
+ goto done;
}
}
unsigned int offset_size = addr_size;
bfd_byte *info_ptr_unit = stash->info_ptr;
- length = read_4_bytes (stash->bfd_ptr, stash->info_ptr);
+ length = read_4_bytes (stash->bfd_ptr, stash->info_ptr, stash->info_ptr_end);
/* A 0xffffff length is the DWARF3 way of indicating
we use 64-bit offsets, instead of 32-bit offsets. */
if (length == 0xffffffff)
{
offset_size = 8;
- length = read_8_bytes (stash->bfd_ptr, stash->info_ptr + 4);
+ length = read_8_bytes (stash->bfd_ptr, stash->info_ptr + 4, stash->info_ptr_end);
stash->info_ptr += 12;
}
/* A zero length is the IRIX way of indicating 64-bit offsets,
else if (length == 0)
{
offset_size = 8;
- length = read_4_bytes (stash->bfd_ptr, stash->info_ptr + 4);
+ length = read_4_bytes (stash->bfd_ptr, stash->info_ptr + 4, stash->info_ptr_end);
stash->info_ptr += 8;
}
/* In the absence of the hints above, we assume 32-bit DWARF2
if (length > 0)
{
+ bfd_byte * new_ptr;
+
each = parse_comp_unit (stash, length, info_ptr_unit,
offset_size);
if (!each)
/* The dwarf information is damaged, don't trust it any
more. */
break;
- stash->info_ptr += length;
+
+ new_ptr = stash->info_ptr + length;
+ /* PR 17512: file: 1500698c. */
+ if (new_ptr < stash->info_ptr)
+ {
+ /* A corrupt length value - do not trust the info any more. */
+ found = FALSE;
+ break;
+ }
+ else
+ stash->info_ptr = new_ptr;
if (stash->all_comp_units)
stash->all_comp_units->prev_unit = each;
else
stash->last_comp_unit = each;
-
+
each->next_unit = stash->all_comp_units;
stash->all_comp_units = each;
-
+
/* DW_AT_low_pc and DW_AT_high_pc are optional for
compilation units. If we don't have them (i.e.,
unit->high == 0), we need to consult the line info table
|| comp_unit_contains_address (each, addr))
&& comp_unit_find_nearest_line (each, addr,
filename_ptr,
- functionname_ptr,
+ &function,
linenumber_ptr,
- stash));
+ discriminator_ptr,
+ stash) != 0);
if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr)
== stash->sec->size)
{
- stash->sec = find_debug_info (stash->bfd_ptr, stash->sec);
+ stash->sec = find_debug_info (stash->bfd_ptr, debug_sections,
+ stash->sec);
stash->sec_info_ptr = stash->info_ptr;
}
}
}
-done:
+ done:
+ if (function)
+ {
+ if (!function->is_linkage)
+ {
+ asymbol *fun;
+ bfd_vma sec_vma;
+
+ fun = _bfd_elf_find_function (abfd, symbols, section, offset,
+ *filename_ptr ? NULL : filename_ptr,
+ functionname_ptr);
+ sec_vma = section->vma;
+ if (section->output_section != NULL)
+ sec_vma = section->output_section->vma + section->output_offset;
+ if (fun != NULL
+ && fun->value + sec_vma == function->arange.low)
+ function->name = *functionname_ptr;
+ /* Even if we didn't find a linkage name, say that we have
+ to stop a repeated search of symbols. */
+ function->is_linkage = TRUE;
+ }
+ *functionname_ptr = function->name;
+ }
if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0)
unset_sections (stash);
return found;
}
-/* The DWARF2 version of find_nearest_line.
- Return TRUE if the line is found without error. */
-
-bfd_boolean
-_bfd_dwarf2_find_nearest_line (bfd *abfd,
- asection *section,
- asymbol **symbols,
- bfd_vma offset,
- const char **filename_ptr,
- const char **functionname_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
-{
- return find_line (abfd, section, offset, NULL, symbols, filename_ptr,
- functionname_ptr, linenumber_ptr, addr_size,
- pinfo);
-}
-
-/* The DWARF2 version of find_line.
- Return TRUE if the line is found without error. */
-
-bfd_boolean
-_bfd_dwarf2_find_line (bfd *abfd,
- asymbol **symbols,
- asymbol *symbol,
- const char **filename_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
-{
- return find_line (abfd, NULL, 0, symbol, symbols, filename_ptr,
- NULL, linenumber_ptr, addr_size,
- pinfo);
-}
-
bfd_boolean
_bfd_dwarf2_find_inliner_info (bfd *abfd ATTRIBUTE_UNUSED,
const char **filename_ptr,
}
void
-_bfd_dwarf2_cleanup_debug_info (bfd *abfd)
+_bfd_dwarf2_cleanup_debug_info (bfd *abfd, void **pinfo)
{
+ struct dwarf2_debug *stash = (struct dwarf2_debug *) *pinfo;
struct comp_unit *each;
- struct dwarf2_debug *stash;
- if (abfd == NULL || elf_tdata (abfd) == NULL)
- return;
-
- stash = (struct dwarf2_debug *) elf_tdata (abfd)->dwarf2_find_line_info;
-
- if (stash == NULL)
+ if (abfd == NULL || stash == NULL)
return;
for (each = stash->all_comp_units; each; each = each->next_unit)
free (stash->dwarf_ranges_buffer);
if (stash->info_ptr_memory)
free (stash->info_ptr_memory);
+ if (stash->close_on_cleanup)
+ bfd_close (stash->bfd_ptr);
+ if (stash->alt_dwarf_str_buffer)
+ free (stash->alt_dwarf_str_buffer);
+ if (stash->alt_dwarf_info_buffer)
+ free (stash->alt_dwarf_info_buffer);
+ if (stash->sec_vma)
+ free (stash->sec_vma);
+ if (stash->adjusted_sections)
+ free (stash->adjusted_sections);
+ if (stash->alt_bfd_ptr)
+ bfd_close (stash->alt_bfd_ptr);
+}
+
+/* Find the function to a particular section and offset,
+ for error reporting. */
+
+asymbol *
+_bfd_elf_find_function (bfd *abfd,
+ asymbol **symbols,
+ asection *section,
+ bfd_vma offset,
+ const char **filename_ptr,
+ const char **functionname_ptr)
+{
+ struct elf_find_function_cache
+ {
+ asection *last_section;
+ asymbol *func;
+ const char *filename;
+ bfd_size_type func_size;
+ } *cache;
+
+ if (symbols == NULL)
+ return NULL;
+
+ if (bfd_get_flavour (abfd) != bfd_target_elf_flavour)
+ return NULL;
+
+ cache = elf_tdata (abfd)->elf_find_function_cache;
+ if (cache == NULL)
+ {
+ cache = bfd_zalloc (abfd, sizeof (*cache));
+ elf_tdata (abfd)->elf_find_function_cache = cache;
+ if (cache == NULL)
+ return NULL;
+ }
+ if (cache->last_section != section
+ || cache->func == NULL
+ || offset < cache->func->value
+ || offset >= cache->func->value + cache->func_size)
+ {
+ asymbol *file;
+ bfd_vma low_func;
+ asymbol **p;
+ /* ??? Given multiple file symbols, it is impossible to reliably
+ choose the right file name for global symbols. File symbols are
+ local symbols, and thus all file symbols must sort before any
+ global symbols. The ELF spec may be interpreted to say that a
+ file symbol must sort before other local symbols, but currently
+ ld -r doesn't do this. So, for ld -r output, it is possible to
+ make a better choice of file name for local symbols by ignoring
+ file symbols appearing after a given local symbol. */
+ enum { nothing_seen, symbol_seen, file_after_symbol_seen } state;
+ const struct elf_backend_data *bed = get_elf_backend_data (abfd);
+
+ file = NULL;
+ low_func = 0;
+ state = nothing_seen;
+ cache->filename = NULL;
+ cache->func = NULL;
+ cache->func_size = 0;
+ cache->last_section = section;
+
+ for (p = symbols; *p != NULL; p++)
+ {
+ asymbol *sym = *p;
+ bfd_vma code_off;
+ bfd_size_type size;
+
+ if ((sym->flags & BSF_FILE) != 0)
+ {
+ file = sym;
+ if (state == symbol_seen)
+ state = file_after_symbol_seen;
+ continue;
+ }
+
+ size = bed->maybe_function_sym (sym, section, &code_off);
+ if (size != 0
+ && code_off <= offset
+ && (code_off > low_func
+ || (code_off == low_func
+ && size > cache->func_size)))
+ {
+ cache->func = sym;
+ cache->func_size = size;
+ cache->filename = NULL;
+ low_func = code_off;
+ if (file != NULL
+ && ((sym->flags & BSF_LOCAL) != 0
+ || state != file_after_symbol_seen))
+ cache->filename = bfd_asymbol_name (file);
+ }
+ if (state == nothing_seen)
+ state = symbol_seen;
+ }
+ }
+
+ if (cache->func == NULL)
+ return NULL;
+
+ if (filename_ptr)
+ *filename_ptr = cache->filename;
+ if (functionname_ptr)
+ *functionname_ptr = bfd_asymbol_name (cache->func);
+
+ return cache->func;
}