/* 32-bit ELF support for ARM
- Copyright 1998, 1999 Free Software Foundation, Inc.
+ Copyright 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
This file is part of BFD, the Binary File Descriptor library.
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
typedef unsigned long int insn32;
typedef unsigned short int insn16;
PARAMS ((bfd *, bfd *));
static boolean elf32_arm_print_private_bfd_data
PARAMS ((bfd *, PTR));
-static int elf32_arm_get_symbol_type
+static int elf32_arm_get_symbol_type
PARAMS (( Elf_Internal_Sym *, int));
static struct bfd_link_hash_table *elf32_arm_link_hash_table_create
PARAMS ((bfd *));
static bfd_reloc_status_type elf32_arm_final_link_relocate
- PARAMS ((reloc_howto_type *, bfd *, bfd *, asection *, bfd_byte *, Elf_Internal_Rela *, bfd_vma, struct bfd_link_info *, asection *, const char *, unsigned char));
-
+ PARAMS ((reloc_howto_type *, bfd *, bfd *, asection *, bfd_byte *,
+ Elf_Internal_Rela *, bfd_vma, struct bfd_link_info *, asection *,
+ const char *, unsigned char, struct elf_link_hash_entry *));
static insn32 insert_thumb_branch
PARAMS ((insn32, int));
static struct elf_link_hash_entry *find_thumb_glue
PARAMS ((struct bfd_link_info *, struct elf_link_hash_entry *));
static void record_thumb_to_arm_glue
PARAMS ((struct bfd_link_info *, struct elf_link_hash_entry *));
+static void elf32_arm_post_process_headers
+ PARAMS ((bfd *, struct bfd_link_info *));
+static int elf32_arm_to_thumb_stub
+ PARAMS ((struct bfd_link_info *, const char *, bfd *, bfd *, asection *,
+ bfd_byte *, asection *, bfd_vma, bfd_signed_vma, bfd_vma));
+static int elf32_thumb_to_arm_stub
+ PARAMS ((struct bfd_link_info *, const char *, bfd *, bfd *, asection *,
+ bfd_byte *, asection *, bfd_vma, bfd_signed_vma, bfd_vma));
+
+#define INTERWORK_FLAG(abfd) (elf_elfheader (abfd)->e_flags & EF_ARM_INTERWORK)
/* The linker script knows the section names for placement.
The entry_names are used to do simple name mangling on the stubs.
Given a function name, and its type, the stub can be found. The
- name can be changed. The only requirement is the %s be present.
- */
-
-#define INTERWORK_FLAG( abfd ) (elf_elfheader (abfd)->e_flags & EF_INTERWORK)
-
+ name can be changed. The only requirement is the %s be present. */
#define THUMB2ARM_GLUE_SECTION_NAME ".glue_7t"
#define THUMB2ARM_GLUE_ENTRY_NAME "__%s_from_thumb"
#define ELF_DYNAMIC_INTERPRETER "/usr/lib/ld.so.1"
/* The size in bytes of an entry in the procedure linkage table. */
-
#define PLT_ENTRY_SIZE 16
/* The first entry in a procedure linkage table looks like
this. It is set up so that any shared library function that is
- called before the relocation has been set up calles the dynamic
- linker first */
-
-static const bfd_byte elf32_arm_plt0_entry [PLT_ENTRY_SIZE] =
+ called before the relocation has been set up calls the dynamic
+ linker first. */
+static const unsigned long elf32_arm_plt0_entry [PLT_ENTRY_SIZE / 4] =
{
- 0x04, 0xe0, 0x2d, 0xe5, /* str lr, [sp, #-4]! */
- 0x10, 0xe0, 0x9f, 0xe5, /* ldr lr, [pc, #16] */
- 0x0e, 0xe0, 0x8f, 0xe0, /* adr lr, pc, lr */
- 0x08, 0xf0, 0xbe, 0xe5 /* ldr pc, [lr, #-4] */
+ 0xe52de004, /* str lr, [sp, #-4]! */
+ 0xe59fe010, /* ldr lr, [pc, #16] */
+ 0xe08fe00e, /* add lr, pc, lr */
+ 0xe5bef008 /* ldr pc, [lr, #8]! */
};
/* Subsequent entries in a procedure linkage table look like
this. */
-
-static const bfd_byte elf32_arm_plt_entry [PLT_ENTRY_SIZE] =
+static const unsigned long elf32_arm_plt_entry [PLT_ENTRY_SIZE / 4] =
{
- 0x04, 0xc0, 0x9f, 0xe5, /* ldr ip, [pc, #4] */
- 0x0c, 0xc0, 0x8f, 0xe0, /* add ip, pc, ip */
- 0x00, 0xf0, 0x9c, 0xe5, /* ldr pc, [ip] */
- 0x00, 0x00, 0x00, 0x00 /* offset to symbol in got */
+ 0xe59fc004, /* ldr ip, [pc, #4] */
+ 0xe08fc00c, /* add ip, pc, ip */
+ 0xe59cf000, /* ldr pc, [ip] */
+ 0x00000000 /* offset to symbol in got */
};
-
/* The ARM linker needs to keep track of the number of relocs that it
decides to copy in check_relocs for each symbol. This is so that
it can discard PC relative relocs if it doesn't need them when
/* This structure keeps track of the number of PC relative relocs we
have copied for a given symbol. */
-
struct elf32_arm_pcrel_relocs_copied
{
/* Next section. */
bfd_size_type count;
};
-/* arm ELF linker hash entry. */
-
+/* Arm ELF linker hash entry. */
struct elf32_arm_link_hash_entry
{
struct elf_link_hash_entry root;
};
/* Declare this now that the above structures are defined. */
-
static boolean elf32_arm_discard_copies
PARAMS ((struct elf32_arm_link_hash_entry *, PTR));
/* Traverse an arm ELF linker hash table. */
-
#define elf32_arm_link_hash_traverse(table, func, info) \
(elf_link_hash_traverse \
(&(table)->root, \
#define elf32_arm_hash_table(info) \
((struct elf32_arm_link_hash_table *) ((info)->hash))
-/* ARM ELF linker hash table */
+/* ARM ELF linker hash table. */
struct elf32_arm_link_hash_table
- {
- /* The main hash table. */
- struct elf_link_hash_table root;
+{
+ /* The main hash table. */
+ struct elf_link_hash_table root;
- /* The size in bytes of the section containg the Thumb-to-ARM glue. */
- long int thumb_glue_size;
+ /* The size in bytes of the section containg the Thumb-to-ARM glue. */
+ long int thumb_glue_size;
- /* The size in bytes of the section containg the ARM-to-Thumb glue. */
- long int arm_glue_size;
+ /* The size in bytes of the section containg the ARM-to-Thumb glue. */
+ long int arm_glue_size;
- /* An arbitary input BFD chosen to hold the glue sections. */
- bfd * bfd_of_glue_owner;
- };
+ /* An arbitary input BFD chosen to hold the glue sections. */
+ bfd * bfd_of_glue_owner;
+ /* A boolean indicating whether knowledge of the ARM's pipeline
+ length should be applied by the linker. */
+ int no_pipeline_knowledge;
+};
-/* Create an ARM elf linker hash table */
+/* Create an entry in an ARM ELF linker hash table. */
+
+static struct bfd_hash_entry *
+elf32_arm_link_hash_newfunc (entry, table, string)
+ struct bfd_hash_entry * entry;
+ struct bfd_hash_table * table;
+ const char * string;
+{
+ struct elf32_arm_link_hash_entry * ret =
+ (struct elf32_arm_link_hash_entry *) entry;
+
+ /* Allocate the structure if it has not already been allocated by a
+ subclass. */
+ if (ret == (struct elf32_arm_link_hash_entry *) NULL)
+ ret = ((struct elf32_arm_link_hash_entry *)
+ bfd_hash_allocate (table,
+ sizeof (struct elf32_arm_link_hash_entry)));
+ if (ret == (struct elf32_arm_link_hash_entry *) NULL)
+ return (struct bfd_hash_entry *) ret;
+
+ /* Call the allocation method of the superclass. */
+ ret = ((struct elf32_arm_link_hash_entry *)
+ _bfd_elf_link_hash_newfunc ((struct bfd_hash_entry *) ret,
+ table, string));
+ if (ret != (struct elf32_arm_link_hash_entry *) NULL)
+ ret->pcrel_relocs_copied = NULL;
+
+ return (struct bfd_hash_entry *) ret;
+}
+
+/* Create an ARM elf linker hash table. */
static struct bfd_link_hash_table *
elf32_arm_link_hash_table_create (abfd)
return NULL;
if (!_bfd_elf_link_hash_table_init (&ret->root, abfd,
- _bfd_elf_link_hash_newfunc))
+ elf32_arm_link_hash_newfunc))
{
bfd_release (abfd, ret);
return NULL;
ret->thumb_glue_size = 0;
ret->arm_glue_size = 0;
ret->bfd_of_glue_owner = NULL;
+ ret->no_pipeline_knowledge = 0;
return &ret->root.root;
}
+/* Locate the Thumb encoded calling stub for NAME. */
+
static struct elf_link_hash_entry *
find_thumb_glue (link_info, name, input_bfd)
struct bfd_link_info *link_info;
/* We need a pointer to the armelf specific hash table. */
hash_table = elf32_arm_hash_table (link_info);
-
tmp_name = ((char *)
bfd_malloc (strlen (name) + strlen (THUMB2ARM_GLUE_ENTRY_NAME) + 1));
if (hash == NULL)
/* xgettext:c-format */
- _bfd_error_handler (_ ("%s: unable to find THUMB glue '%s' for `%s'"),
+ _bfd_error_handler (_("%s: unable to find THUMB glue '%s' for `%s'"),
bfd_get_filename (input_bfd), tmp_name, name);
free (tmp_name);
return hash;
}
+/* Locate the ARM encoded calling stub for NAME. */
+
static struct elf_link_hash_entry *
find_arm_glue (link_info, name, input_bfd)
struct bfd_link_info *link_info;
if (myh == NULL)
/* xgettext:c-format */
- _bfd_error_handler (_ ("%s: unable to find ARM glue '%s' for `%s'"),
+ _bfd_error_handler (_("%s: unable to find ARM glue '%s' for `%s'"),
bfd_get_filename (input_bfd), tmp_name, name);
free (tmp_name);
return myh;
}
-/*
- ARM->Thumb glue:
+/* ARM->Thumb glue:
.arm
__func_from_arm:
ldr r12, __func_addr
bx r12
__func_addr:
- .word func @ behave as if you saw a ARM_32 reloc
- */
+ .word func @ behave as if you saw a ARM_32 reloc. */
#define ARM2THUMB_GLUE_SIZE 12
static const insn32 a2t1_ldr_insn = 0xe59fc000;
static const insn32 a2t2_bx_r12_insn = 0xe12fff1c;
static const insn32 a2t3_func_addr_insn = 0x00000001;
-/*
- Thumb->ARM: Thumb->(non-interworking aware) ARM
+/* Thumb->ARM: Thumb->(non-interworking aware) ARM
.thumb .thumb
.align 2 .align 2
ldmia r13! {r6, lr}
bx lr
__func_addr:
- .word func
- */
+ .word func */
#define THUMB2ARM_GLUE_SIZE 8
static const insn16 t2a1_bx_pc_insn = 0x4778;
s = bfd_get_section_by_name
(globals->bfd_of_glue_owner, ARM2THUMB_GLUE_SECTION_NAME);
-
BFD_ASSERT (s != NULL);
tmp_name = ((char *)
if (myh != NULL)
{
+ /* We've already seen this guy. */
free (tmp_name);
- return; /* we've already seen this guy */
+ return;
}
/* The only trick here is using hash_table->arm_glue_size as the value. Even
though the section isn't allocated yet, this is where we will be putting
it. */
-
_bfd_generic_link_add_one_symbol (link_info, globals->bfd_of_glue_owner, tmp_name,
BSF_GLOBAL,
s, globals->arm_glue_size + 1,
if (myh != NULL)
{
+ /* We've already seen this guy. */
free (tmp_name);
- return; /* we've already seen this guy */
+ return;
}
_bfd_generic_link_add_one_symbol (link_info, hash_table->bfd_of_glue_owner, tmp_name,
NULL, true, false,
(struct bfd_link_hash_entry **) &myh);
- /* If we mark it 'thumb', the disassembler will do a better job. */
+ /* If we mark it 'Thumb', the disassembler will do a better job. */
bind = ELF_ST_BIND (myh->type);
myh->type = ELF_ST_INFO (bind, STT_ARM_TFUNC);
free (tmp_name);
- /* Allocate another symbol to mark where we switch to arm mode. */
-
#define CHANGE_TO_ARM "__%s_change_to_arm"
#define BACK_FROM_ARM "__%s_back_from_arm"
+ /* Allocate another symbol to mark where we switch to Arm mode. */
tmp_name = (char *) bfd_malloc (strlen (name) + strlen (CHANGE_TO_ARM) + 1);
BFD_ASSERT (tmp_name);
/* Select a BFD to be used to hold the sections used by the glue code.
This function is called from the linker scripts in ld/emultempl/
{armelf/pe}.em */
+
boolean
bfd_elf32_arm_get_bfd_for_interworking (abfd, info)
bfd *abfd;
if (sec == NULL)
{
- flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY;
+ /* Note: we do not include the flag SEC_LINKER_CREATED, as this
+ will prevent elf_link_input_bfd() from processing the contents
+ of this section. */
+ flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_CODE | SEC_READONLY;
sec = bfd_make_section (abfd, ARM2THUMB_GLUE_SECTION_NAME);
|| !bfd_set_section_flags (abfd, sec, flags)
|| !bfd_set_section_alignment (abfd, sec, 2))
return false;
+
+ /* Set the gc mark to prevent the section from being removed by garbage
+ collection, despite the fact that no relocs refer to this section. */
+ sec->gc_mark = 1;
}
sec = bfd_get_section_by_name (abfd, THUMB2ARM_GLUE_SECTION_NAME);
if (sec == NULL)
{
- flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY;
+ flags = SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_CODE | SEC_READONLY;
sec = bfd_make_section (abfd, THUMB2ARM_GLUE_SECTION_NAME);
|| !bfd_set_section_flags (abfd, sec, flags)
|| !bfd_set_section_alignment (abfd, sec, 2))
return false;
+
+ sec->gc_mark = 1;
}
/* Save the bfd for later use. */
}
boolean
-bfd_elf32_arm_process_before_allocation (abfd, link_info)
+bfd_elf32_arm_process_before_allocation (abfd, link_info, no_pipeline_knowledge)
bfd *abfd;
struct bfd_link_info *link_info;
+ int no_pipeline_knowledge;
{
Elf_Internal_Shdr *symtab_hdr;
Elf_Internal_Rela *free_relocs = NULL;
/* Here we have a bfd that is to be included on the link. We have a hook
to do reloc rummaging, before section sizes are nailed down. */
-
globals = elf32_arm_hash_table (link_info);
BFD_ASSERT (globals != NULL);
BFD_ASSERT (globals->bfd_of_glue_owner != NULL);
+ globals->no_pipeline_knowledge = no_pipeline_knowledge;
+
/* Rummage around all the relocs and map the glue vectors. */
sec = abfd->sections;
continue;
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
- /* Load the relocs. */
+ /* Load the relocs. */
irel = (_bfd_elf32_link_read_relocs (abfd, sec, (PTR) NULL,
(Elf_Internal_Rela *) NULL, false));
{
long r_type;
unsigned long r_index;
- unsigned char code;
struct elf_link_hash_entry *h;
r_type = ELF32_R_TYPE (irel->r_info);
r_index = ELF32_R_SYM (irel->r_info);
- /* These are the only relocation types we care about */
- if (r_type != R_ARM_PC24
+ /* These are the only relocation types we care about. */
+ if ( r_type != R_ARM_PC24
&& r_type != R_ARM_THM_PC22)
continue;
contents = (bfd_byte *) bfd_malloc (sec->_raw_size);
if (contents == NULL)
goto error_return;
+
free_contents = contents;
if (!bfd_get_section_contents (abfd, sec, contents,
bfd_malloc (symtab_hdr->sh_size));
if (extsyms == NULL)
goto error_return;
+
free_extsyms = extsyms;
+
if (bfd_seek (abfd, symtab_hdr->sh_offset, SEEK_SET) != 0
|| (bfd_read (extsyms, 1, symtab_hdr->sh_size, abfd)
!= symtab_hdr->sh_size))
}
}
- /* If the relocation is not against a symbol it cannot concern us. */
-
+ /* If the relocation is not against a symbol it cannot concern us. */
h = NULL;
- /* We don't care about local symbols */
+ /* We don't care about local symbols. */
if (r_index < symtab_hdr->sh_info)
continue;
- /* This is an external symbol */
+ /* This is an external symbol. */
r_index -= symtab_hdr->sh_info;
h = (struct elf_link_hash_entry *)
elf_sym_hashes (abfd)[r_index];
{
case R_ARM_PC24:
/* This one is a call from arm code. We need to look up
- the target of the call. If it is a thumb target, we
+ the target of the call. If it is a thumb target, we
insert glue. */
-
if (ELF_ST_TYPE(h->type) == STT_ARM_TFUNC)
record_arm_to_thumb_glue (link_info, h);
break;
case R_ARM_THM_PC22:
- /* This one is a call from thumb code. We look
- up the target of the call. If it is not a thumb
- target, we insert glue. */
-
+ /* This one is a call from thumb code. We look
+ up the target of the call. If it is not a thumb
+ target, we insert glue. */
if (ELF_ST_TYPE (h->type) != STT_ARM_TFUNC)
record_thumb_to_arm_glue (link_info, h);
break;
}
return true;
+
error_return:
if (free_relocs != NULL)
free (free_relocs);
free (free_contents);
if (free_extsyms != NULL)
free (free_extsyms);
- return false;
+ return false;
}
/* The thumb form of a long branch is a bit finicky, because the offset
encoding is split over two fields, each in it's own instruction. They
- can occur in any order. So given a thumb form of long branch, and an
+ can occur in any order. So given a thumb form of long branch, and an
offset, insert the offset into the thumb branch and return finished
- instruction.
+ instruction.
- It takes two thumb instructions to encode the target address. Each has
+ It takes two thumb instructions to encode the target address. Each has
11 bits to invest. The upper 11 bits are stored in one (identifed by
- H-0.. see below), the lower 11 bits are stored in the other (identified
- by H-1).
+ H-0.. see below), the lower 11 bits are stored in the other (identified
+ by H-1).
- Combine together and shifted left by 1 (it's a half word address) and
+ Combine together and shifted left by 1 (it's a half word address) and
there you have it.
Op: 1111 = F,
Op: 1111 = F,
H-1, lower address-0 = 800
- They can be ordered either way, but the arm tools I've seen always put
+ They can be ordered either way, but the arm tools I've seen always put
the lower one first. It probably doesn't matter. krk@cygnus.com
XXX: Actually the order does matter. The second instruction (H-1)
moves the computed address into the PC, so it must be the second one
in the sequence. The problem, however is that whilst little endian code
stores the instructions in HI then LOW order, big endian code does the
- reverse. nickc@cygnus.com */
+ reverse. nickc@cygnus.com. */
-#define LOW_HI_ORDER 0xF800F000
-#define HI_LOW_ORDER 0xF000F800
+#define LOW_HI_ORDER 0xF800F000
+#define HI_LOW_ORDER 0xF000F800
static insn32
insert_thumb_branch (br_insn, rel_off)
unsigned int low_bits;
unsigned int high_bits;
-
BFD_ASSERT ((rel_off & 1) != 1);
- rel_off >>= 1; /* half word aligned address */
- low_bits = rel_off & 0x000007FF; /* the bottom 11 bits */
- high_bits = (rel_off >> 11) & 0x000007FF; /* the top 11 bits */
+ rel_off >>= 1; /* Half word aligned address. */
+ low_bits = rel_off & 0x000007FF; /* The bottom 11 bits. */
+ high_bits = (rel_off >> 11) & 0x000007FF; /* The top 11 bits. */
if ((br_insn & LOW_HI_ORDER) == LOW_HI_ORDER)
br_insn = LOW_HI_ORDER | (low_bits << 16) | high_bits;
else if ((br_insn & HI_LOW_ORDER) == HI_LOW_ORDER)
br_insn = HI_LOW_ORDER | (high_bits << 16) | low_bits;
else
- abort (); /* error - not a valid branch instruction form */
-
- /* FIXME: abort is probably not the right call. krk@cygnus.com */
+ /* FIXME: abort is probably not the right call. krk@cygnus.com */
+ abort (); /* error - not a valid branch instruction form. */
return br_insn;
}
-/* Thumb code calling an ARM function */
+/* Thumb code calling an ARM function. */
+
static int
elf32_thumb_to_arm_stub (info, name, input_bfd, output_bfd, input_section,
hit_data, sym_sec, offset, addend, val)
- struct bfd_link_info *info;
- char *name;
- bfd *input_bfd;
- bfd *output_bfd;
- asection *input_section;
- bfd_byte *hit_data;
- asection *sym_sec;
- int offset;
- int addend;
- bfd_vma val;
+ struct bfd_link_info * info;
+ const char * name;
+ bfd * input_bfd;
+ bfd * output_bfd;
+ asection * input_section;
+ bfd_byte * hit_data;
+ asection * sym_sec;
+ bfd_vma offset;
+ bfd_signed_vma addend;
+ bfd_vma val;
{
- asection *s = 0;
+ asection * s = 0;
long int my_offset;
unsigned long int tmp;
long int ret_offset;
- struct elf_link_hash_entry *myh;
- struct elf32_arm_link_hash_table *globals;
+ struct elf_link_hash_entry * myh;
+ struct elf32_arm_link_hash_table * globals;
myh = find_thumb_glue (info, name, input_bfd);
if (myh == NULL)
&& !INTERWORK_FLAG (sym_sec->owner))
{
_bfd_error_handler
- (_ ("%s(%s): warning: interworking not enabled."),
+ (_("%s(%s): warning: interworking not enabled."),
bfd_get_filename (sym_sec->owner), name);
_bfd_error_handler
- (_ (" first occurrence: %s: thumb call to arm"),
+ (_(" first occurrence: %s: thumb call to arm"),
bfd_get_filename (input_bfd));
return false;
s->contents + my_offset + 2);
ret_offset =
- ((bfd_signed_vma) val) /* Address of destination of the stub */
+ /* Address of destination of the stub. */
+ ((bfd_signed_vma) val)
- ((bfd_signed_vma)
- (s->output_offset /* Offset from the start of the current section to the start of the stubs. */
- + my_offset /* Offset of the start of this stub from the start of the stubs. */
- + s->output_section->vma) /* Address of the start of the current section. */
- + 4 /* The branch instruction is 4 bytes into the stub. */
- + 8); /* ARM branches work from the pc of the instruction + 8. */
+ /* Offset from the start of the current section to the start of the stubs. */
+ (s->output_offset
+ /* Offset of the start of this stub from the start of the stubs. */
+ + my_offset
+ /* Address of the start of the current section. */
+ + s->output_section->vma)
+ /* The branch instruction is 4 bytes into the stub. */
+ + 4
+ /* ARM branches work from the pc of the instruction + 8. */
+ + 8);
bfd_put_32 (output_bfd,
t2a3_b_insn | ((ret_offset >> 2) & 0x00FFFFFF),
+ my_offset
- (input_section->output_offset
+ offset + addend)
- - 4;
+ - 8;
tmp = bfd_get_32 (input_bfd, hit_data
- input_section->vma);
return true;
}
-/* Arm code calling a Thumb function */
+/* Arm code calling a Thumb function. */
+
static int
elf32_arm_to_thumb_stub (info, name, input_bfd, output_bfd, input_section,
hit_data, sym_sec, offset, addend, val)
-
- struct bfd_link_info *info;
- char *name;
- bfd *input_bfd;
- bfd *output_bfd;
- asection *input_section;
- bfd_byte *hit_data;
- asection *sym_sec;
- int offset;
- int addend;
- bfd_vma val;
+ struct bfd_link_info * info;
+ const char * name;
+ bfd * input_bfd;
+ bfd * output_bfd;
+ asection * input_section;
+ bfd_byte * hit_data;
+ asection * sym_sec;
+ bfd_vma offset;
+ bfd_signed_vma addend;
+ bfd_vma val;
{
unsigned long int tmp;
long int my_offset;
- asection *s;
+ asection * s;
long int ret_offset;
- struct elf_link_hash_entry *myh;
- struct elf32_arm_link_hash_table *globals;
+ struct elf_link_hash_entry * myh;
+ struct elf32_arm_link_hash_table * globals;
myh = find_arm_glue (info, name, input_bfd);
if (myh == NULL)
&& !INTERWORK_FLAG (sym_sec->owner))
{
_bfd_error_handler
- (_ ("%s(%s): warning: interworking not enabled."),
+ (_("%s(%s): warning: interworking not enabled."),
bfd_get_filename (sym_sec->owner), name);
_bfd_error_handler
- (_ (" first occurrence: %s: arm call to thumb"),
+ (_(" first occurrence: %s: arm call to thumb"),
bfd_get_filename (input_bfd));
}
+
--my_offset;
myh->root.u.def.value = my_offset;
tmp = bfd_get_32 (input_bfd, hit_data);
tmp = tmp & 0xFF000000;
- /* Somehow these are both 4 too far, so subtract 8. */
+ /* Somehow these are both 4 too far, so subtract 8. */
ret_offset = s->output_offset
+ my_offset
+ s->output_section->vma
bfd_put_32 (output_bfd, tmp, hit_data
- input_section->vma);
-
return true;
}
/* Perform a relocation as part of a final link. */
+
static bfd_reloc_status_type
elf32_arm_final_link_relocate (howto, input_bfd, output_bfd,
input_section, contents, rel, value,
- info, sym_sec, sym_name, sym_flags)
+ info, sym_sec, sym_name, sym_flags, h)
reloc_howto_type * howto;
bfd * input_bfd;
bfd * output_bfd;
asection * sym_sec;
const char * sym_name;
unsigned char sym_flags;
+ struct elf_link_hash_entry * h;
{
unsigned long r_type = howto->type;
unsigned long r_symndx;
asection * sgot = NULL;
asection * splt = NULL;
asection * sreloc = NULL;
- struct elf_link_hash_entry * h = NULL;
bfd_vma addend;
-
+ bfd_signed_vma signed_addend;
+ struct elf32_arm_link_hash_table * globals;
+
+ /* If the start address has been set, then set the EF_ARM_HASENTRY
+ flag. Setting this more than once is redundant, but the cost is
+ not too high, and it keeps the code simple.
+
+ The test is done here, rather than somewhere else, because the
+ start address is only set just before the final link commences.
+
+ Note - if the user deliberately sets a start address of 0, the
+ flag will not be set. */
+ if (bfd_get_start_address (output_bfd) != 0)
+ elf_elfheader (output_bfd)->e_flags |= EF_ARM_HASENTRY;
+
+ globals = elf32_arm_hash_table (info);
+
dynobj = elf_hash_table (info)->dynobj;
if (dynobj)
{
r_symndx = ELF32_R_SYM (rel->r_info);
#ifdef USE_REL
- addend = (bfd_get_32 (input_bfd, hit_data) & howto->src_mask);
+ addend = bfd_get_32 (input_bfd, hit_data) & howto->src_mask;
+
+ if (addend & ((howto->src_mask + 1) >> 1))
+ {
+ signed_addend = -1;
+ signed_addend &= ~ howto->src_mask;
+ signed_addend |= addend;
+ }
+ else
+ signed_addend = addend;
#else
- addend = rel->r_addend;
+ addend = signed_addend = rel->r_addend;
#endif
-
+
switch (r_type)
{
case R_ARM_NONE:
case R_ARM_PC24:
case R_ARM_ABS32:
case R_ARM_REL32:
+#ifndef OLD_ARM_ABI
+ case R_ARM_XPC25:
+#endif
/* When generating a shared object, these relocations are copied
- into the output file to be resolved at run time. */
-
+ into the output file to be resolved at run time. */
if (info->shared
&& (r_type != R_ARM_PC24
|| (h != NULL
{
Elf_Internal_Rel outrel;
boolean skip, relocate;
-
+
if (sreloc == NULL)
{
const char * name;
-
+
name = (bfd_elf_string_from_elf_section
(input_bfd,
elf_elfheader (input_bfd)->e_shstrndx,
elf_section_data (input_section)->rel_hdr.sh_name));
if (name == NULL)
return bfd_reloc_notsupported;
-
+
BFD_ASSERT (strncmp (name, ".rel", 4) == 0
&& strcmp (bfd_get_section_name (input_bfd,
input_section),
name + 4) == 0);
-
+
sreloc = bfd_get_section_by_name (dynobj, name);
BFD_ASSERT (sreloc != NULL);
}
-
+
skip = false;
-
+
if (elf_section_data (input_section)->stab_info == NULL)
outrel.r_offset = rel->r_offset;
else
{
bfd_vma off;
-
+
off = (_bfd_stab_section_offset
(output_bfd, &elf_hash_table (info)->stab_info,
input_section,
skip = true;
outrel.r_offset = off;
}
-
+
outrel.r_offset += (input_section->output_section->vma
+ input_section->output_offset);
-
+
if (skip)
{
memset (&outrel, 0, sizeof outrel);
outrel.r_info = ELF32_R_INFO (h->dynindx, R_ARM_ABS32);
}
}
-
+
bfd_elf32_swap_reloc_out (output_bfd, &outrel,
(((Elf32_External_Rel *)
sreloc->contents)
+ sreloc->reloc_count));
++sreloc->reloc_count;
-
- /* If this reloc is against an external symbol, we do not want to
+
+ /* If this reloc is against an external symbol, we do not want to
fiddle with the addend. Otherwise, we need to include the symbol
- value so that it becomes an addend for the dynamic reloc. */
+ value so that it becomes an addend for the dynamic reloc. */
if (! relocate)
return bfd_reloc_ok;
-
- return _bfd_final_link_relocate (howto, input_bfd, input_section,
+
+ return _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset, value,
(bfd_vma) 0);
}
else switch (r_type)
{
- case R_ARM_PC24:
- /* Arm B/BL instruction */
-
- /* Check for arm calling thumb function. */
- if (sym_flags == STT_ARM_TFUNC)
+#ifndef OLD_ARM_ABI
+ case R_ARM_XPC25: /* Arm BLX instruction. */
+#endif
+ case R_ARM_PC24: /* Arm B/BL instruction */
+#ifndef OLD_ARM_ABI
+ if (r_type == R_ARM_XPC25)
{
- elf32_arm_to_thumb_stub (info, sym_name, input_bfd, output_bfd,
- input_section, hit_data, sym_sec, rel->r_offset, addend, value);
- return bfd_reloc_ok;
+ /* Check for Arm calling Arm function. */
+ /* FIXME: Should we translate the instruction into a BL
+ instruction instead ? */
+ if (sym_flags != STT_ARM_TFUNC)
+ _bfd_error_handler (_("\
+%s: Warning: Arm BLX instruction targets Arm function '%s'."),
+ bfd_get_filename (input_bfd),
+ h ? h->root.root.string : "(local)");
}
-
- value = value + addend;
- value -= (input_section->output_section->vma
- + input_section->output_offset + 8);
- value -= rel->r_offset;
- value = value >> howto->rightshift;
-
- value &= 0xffffff;
- value |= (bfd_get_32 (input_bfd, hit_data) & 0xff000000);
+ else
+#endif
+ {
+ /* Check for Arm calling Thumb function. */
+ if (sym_flags == STT_ARM_TFUNC)
+ {
+ elf32_arm_to_thumb_stub (info, sym_name, input_bfd, output_bfd,
+ input_section, hit_data, sym_sec, rel->r_offset,
+ signed_addend, value);
+ return bfd_reloc_ok;
+ }
+ }
+
+ if ( strcmp (bfd_get_target (input_bfd), "elf32-littlearm-oabi") == 0
+ || strcmp (bfd_get_target (input_bfd), "elf32-bigarm-oabi") == 0)
+ {
+ /* The old way of doing things. Trearing the addend as a
+ byte sized field and adding in the pipeline offset. */
+ value -= (input_section->output_section->vma
+ + input_section->output_offset);
+ value -= rel->r_offset;
+ value += addend;
+
+ if (! globals->no_pipeline_knowledge)
+ value -= 8;
+ }
+ else
+ {
+ /* The ARM ELF ABI says that this reloc is computed as: S - P + A
+ where:
+ S is the address of the symbol in the relocation.
+ P is address of the instruction being relocated.
+ A is the addend (extracted from the instruction) in bytes.
+
+ S is held in 'value'.
+ P is the base address of the section containing the instruction
+ plus the offset of the reloc into that section, ie:
+ (input_section->output_section->vma +
+ input_section->output_offset +
+ rel->r_offset).
+ A is the addend, converted into bytes, ie:
+ (signed_addend * 4)
+
+ Note: None of these operations have knowledge of the pipeline
+ size of the processor, thus it is up to the assembler to encode
+ this information into the addend. */
+ value -= (input_section->output_section->vma
+ + input_section->output_offset);
+ value -= rel->r_offset;
+ value += (signed_addend << howto->size);
+
+ /* Previous versions of this code also used to add in the pipeline
+ offset here. This is wrong because the linker is not supposed
+ to know about such things, and one day it might change. In order
+ to support old binaries that need the old behaviour however, so
+ we attempt to detect which ABI was used to create the reloc. */
+ if (! globals->no_pipeline_knowledge)
+ {
+ Elf_Internal_Ehdr * i_ehdrp; /* Elf file header, internal form */
+
+ i_ehdrp = elf_elfheader (input_bfd);
+
+ if (i_ehdrp->e_ident[EI_OSABI] == 0)
+ value -= 8;
+ }
+ }
+
+ signed_addend = value;
+ signed_addend >>= howto->rightshift;
+
+ /* It is not an error for an undefined weak reference to be
+ out of range. Any program that branches to such a symbol
+ is going to crash anyway, so there is no point worrying
+ about getting the destination exactly right. */
+ if (! h || h->root.type != bfd_link_hash_undefweak)
+ {
+ /* Perform a signed range check. */
+ if ( signed_addend > ((bfd_signed_vma) (howto->dst_mask >> 1))
+ || signed_addend < - ((bfd_signed_vma) ((howto->dst_mask + 1) >> 1)))
+ return bfd_reloc_overflow;
+ }
+
+#ifndef OLD_ARM_ABI
+ /* If necessary set the H bit in the BLX instruction. */
+ if (r_type == R_ARM_XPC25 && ((value & 2) == 2))
+ value = (signed_addend & howto->dst_mask)
+ | (bfd_get_32 (input_bfd, hit_data) & (~ howto->dst_mask))
+ | (1 << 24);
+ else
+#endif
+ value = (signed_addend & howto->dst_mask)
+ | (bfd_get_32 (input_bfd, hit_data) & (~ howto->dst_mask));
break;
-
+
case R_ARM_ABS32:
value += addend;
if (sym_flags == STT_ARM_TFUNC)
value |= 1;
break;
-
+
case R_ARM_REL32:
value -= (input_section->output_section->vma
+ input_section->output_offset);
value += addend;
break;
}
-
+
bfd_put_32 (input_bfd, value, hit_data);
return bfd_reloc_ok;
return bfd_reloc_ok;
case R_ARM_THM_ABS5:
- /* Support ldr and str instructions for the thumb. */
+ /* Support ldr and str instructions for the thumb. */
#ifdef USE_REL
/* Need to refetch addend. */
addend = bfd_get_16 (input_bfd, hit_data) & howto->src_mask;
bfd_put_16 (input_bfd, value, hit_data);
return bfd_reloc_ok;
+#ifndef OLD_ARM_ABI
+ case R_ARM_THM_XPC22:
+#endif
case R_ARM_THM_PC22:
- /* Thumb BL (branch long instruction). */
+ /* Thumb BL (branch long instruction). */
{
- bfd_vma relocation;
- boolean overflow = false;
- bfd_vma upper_insn = bfd_get_16 (input_bfd, hit_data);
- bfd_vma lower_insn = bfd_get_16 (input_bfd, hit_data + 2);
- bfd_vma src_mask = 0x007FFFFE;
+ bfd_vma relocation;
+ boolean overflow = false;
+ bfd_vma upper_insn = bfd_get_16 (input_bfd, hit_data);
+ bfd_vma lower_insn = bfd_get_16 (input_bfd, hit_data + 2);
bfd_signed_vma reloc_signed_max = (1 << (howto->bitsize - 1)) - 1;
- bfd_signed_vma reloc_signed_min = ~reloc_signed_max;
- bfd_vma check;
+ bfd_signed_vma reloc_signed_min = ~ reloc_signed_max;
+ bfd_vma check;
bfd_signed_vma signed_check;
- bfd_vma add;
- bfd_signed_vma signed_add;
#ifdef USE_REL
/* Need to refetch the addend and squish the two 11 bit pieces
together. */
{
- bfd_vma upper = bfd_get_16 (input_bfd, hit_data) & 0x7ff;
- bfd_vma lower = bfd_get_16 (input_bfd, hit_data + 2) & 0x7ff;
- upper = (upper ^ 0x400) - 0x400; /* sign extend */
+ bfd_vma upper = upper_insn & 0x7ff;
+ bfd_vma lower = lower_insn & 0x7ff;
+ upper = (upper ^ 0x400) - 0x400; /* Sign extend. */
addend = (upper << 12) | (lower << 1);
+ signed_addend = addend;
}
#endif
-
- /* If it's not a call to thumb, assume call to arm */
- if (sym_flags != STT_ARM_TFUNC)
+#ifndef OLD_ARM_ABI
+ if (r_type == R_ARM_THM_XPC22)
{
- if (elf32_thumb_to_arm_stub
- (info, sym_name, input_bfd, output_bfd, input_section,
- hit_data, sym_sec, rel->r_offset, addend, value))
- return bfd_reloc_ok;
- else
- return bfd_reloc_dangerous;
+ /* Check for Thumb to Thumb call. */
+ /* FIXME: Should we translate the instruction into a BL
+ instruction instead ? */
+ if (sym_flags == STT_ARM_TFUNC)
+ _bfd_error_handler (_("\
+%s: Warning: Thumb BLX instruction targets thumb function '%s'."),
+ bfd_get_filename (input_bfd),
+ h ? h->root.root.string : "(local)");
}
+ else
+#endif
+ {
+ /* If it is not a call to Thumb, assume call to Arm.
+ If it is a call relative to a section name, then it is not a
+ function call at all, but rather a long jump. */
+ if (sym_flags != STT_ARM_TFUNC && sym_flags != STT_SECTION)
+ {
+ if (elf32_thumb_to_arm_stub
+ (info, sym_name, input_bfd, output_bfd, input_section,
+ hit_data, sym_sec, rel->r_offset, signed_addend, value))
+ return bfd_reloc_ok;
+ else
+ return bfd_reloc_dangerous;
+ }
+ }
+
+ relocation = value + signed_addend;
- /* +4: pc is offset by 4 */
- relocation = value + addend + 4;
relocation -= (input_section->output_section->vma
- + input_section->output_offset);
- relocation -= rel->r_offset;
+ + input_section->output_offset
+ + rel->r_offset);
+
+ if (! globals->no_pipeline_knowledge)
+ {
+ Elf_Internal_Ehdr * i_ehdrp; /* Elf file header, internal form. */
+
+ i_ehdrp = elf_elfheader (input_bfd);
+
+ /* Previous versions of this code also used to add in the pipline
+ offset here. This is wrong because the linker is not supposed
+ to know about such things, and one day it might change. In order
+ to support old binaries that need the old behaviour however, so
+ we attempt to detect which ABI was used to create the reloc. */
+ if ( strcmp (bfd_get_target (input_bfd), "elf32-littlearm-oabi") == 0
+ || strcmp (bfd_get_target (input_bfd), "elf32-bigarm-oabi") == 0
+ || i_ehdrp->e_ident[EI_OSABI] == 0)
+ relocation += 4;
+ }
check = relocation >> howto->rightshift;
else
signed_check = check | ~((bfd_vma) -1 >> howto->rightshift);
- add = ((upper_insn & 0x7ff) << 12) | ((lower_insn & 0x7ff) << 1);
- /* sign extend */
- signed_add = (add ^ 0x400000) - 0x400000;
-
- /* Add the value from the object file. */
- signed_check += signed_add;
- relocation += signed_add;
-
/* Assumes two's complement. */
- if (signed_check > reloc_signed_max
- || signed_check < reloc_signed_min)
+ if (signed_check > reloc_signed_max || signed_check < reloc_signed_min)
overflow = true;
/* Put RELOCATION back into the insn. */
upper_insn = (upper_insn & ~(bfd_vma) 0x7ff) | ((relocation >> 12) & 0x7ff);
lower_insn = (lower_insn & ~(bfd_vma) 0x7ff) | ((relocation >> 1) & 0x7ff);
+#ifndef OLD_ARM_ABI
+ if (r_type == R_ARM_THM_XPC22
+ && ((lower_insn & 0x1800) == 0x0800))
+ /* Remove bit zero of the adjusted offset. Bit zero can only be
+ set if the upper insn is at a half-word boundary, since the
+ destination address, an ARM instruction, must always be on a
+ word boundary. The semantics of the BLX (1) instruction, however,
+ are that bit zero in the offset must always be zero, and the
+ corresponding bit one in the target address will be set from bit
+ one of the source address. */
+ lower_insn &= ~1;
+#endif
/* Put the relocated value back in the object file: */
bfd_put_16 (input_bfd, upper_insn, hit_data);
bfd_put_16 (input_bfd, lower_insn, hit_data + 2);
BFD_ASSERT (sgot != NULL);
if (sgot == NULL)
return bfd_reloc_notsupported;
-
+
/* Note that sgot->output_offset is not involved in this
calculation. We always want the start of .got. If we
define _GLOBAL_OFFSET_TABLE in a different way, as is
permitted by the ABI, we might have to change this
- calculation. */
-
+ calculation. */
value -= sgot->output_section->vma;
- return _bfd_final_link_relocate (howto, input_bfd, input_section,
+ return _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset, value,
(bfd_vma) 0);
case R_ARM_GOTPC:
- /* Use global offset table as symbol value. */
-
+ /* Use global offset table as symbol value. */
BFD_ASSERT (sgot != NULL);
-
+
if (sgot == NULL)
return bfd_reloc_notsupported;
value = sgot->output_section->vma;
- return _bfd_final_link_relocate (howto, input_bfd, input_section,
+ return _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset, value,
(bfd_vma) 0);
-
+
case R_ARM_GOT32:
/* Relocation is to the entry for this symbol in the
- global offset table. */
+ global offset table. */
if (sgot == NULL)
return bfd_reloc_notsupported;
-
+
if (h != NULL)
{
bfd_vma off;
-
+
off = h->got.offset;
BFD_ASSERT (off != (bfd_vma) -1);
-
+
if (!elf_hash_table (info)->dynamic_sections_created ||
(info->shared && (info->symbolic || h->dynindx == -1)
&& (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR)))
entry in the global offset table. Since the offset must
always be a multiple of 4, we use the least significant bit
to record whether we have initialized it already.
-
+
When doing a dynamic link, we create a .rel.got relocation
- entry to initialize the value. This is done in the
- finish_dynamic_symbol routine. */
-
+ entry to initialize the value. This is done in the
+ finish_dynamic_symbol routine. */
if ((off & 1) != 0)
off &= ~1;
else
h->got.offset |= 1;
}
}
-
+
value = sgot->output_offset + off;
}
else
{
bfd_vma off;
-
+
BFD_ASSERT (local_got_offsets != NULL &&
local_got_offsets[r_symndx] != (bfd_vma) -1);
-
+
off = local_got_offsets[r_symndx];
-
+
/* The offset must always be a multiple of 4. We use the
least significant bit to record whether we have already
- generated the necessary reloc. */
+ generated the necessary reloc. */
if ((off & 1) != 0)
off &= ~1;
else
{
bfd_put_32 (output_bfd, value, sgot->contents + off);
-
+
if (info->shared)
{
asection * srelgot;
Elf_Internal_Rel outrel;
-
+
srelgot = bfd_get_section_by_name (dynobj, ".rel.got");
BFD_ASSERT (srelgot != NULL);
-
+
outrel.r_offset = (sgot->output_section->vma
- + sgot->output_offset
+ + sgot->output_offset
+ off);
outrel.r_info = ELF32_R_INFO (0, R_ARM_RELATIVE);
bfd_elf32_swap_reloc_out (output_bfd, &outrel,
+ srelgot->reloc_count));
++srelgot->reloc_count;
}
-
+
local_got_offsets[r_symndx] |= 1;
}
-
+
value = sgot->output_offset + off;
}
-
- return _bfd_final_link_relocate (howto, input_bfd, input_section,
+
+ return _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset, value,
(bfd_vma) 0);
-
+
case R_ARM_PLT32:
/* Relocation is to the entry for this symbol in the
procedure linkage table. */
/* Resolve a PLT32 reloc against a local symbol directly,
- without using the procedure linkage table. */
+ without using the procedure linkage table. */
if (h == NULL)
return _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset, value,
return _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset, value,
(bfd_vma) 0);
-
+
case R_ARM_SBREL32:
return bfd_reloc_notsupported;
}
}
+#ifdef USE_REL
+/* Add INCREMENT to the reloc (of type HOWTO) at ADDRESS. */
+static void
+arm_add_to_rel (abfd, address, howto, increment)
+ bfd * abfd;
+ bfd_byte * address;
+ reloc_howto_type * howto;
+ bfd_signed_vma increment;
+{
+ bfd_signed_vma addend;
+
+ if (howto->type == R_ARM_THM_PC22)
+ {
+ int upper_insn, lower_insn;
+ int upper, lower;
+
+ upper_insn = bfd_get_16 (abfd, address);
+ lower_insn = bfd_get_16 (abfd, address + 2);
+ upper = upper_insn & 0x7ff;
+ lower = lower_insn & 0x7ff;
+
+ addend = (upper << 12) | (lower << 1);
+ addend += increment;
+ addend >>= 1;
+
+ upper_insn = (upper_insn & 0xf800) | ((addend >> 11) & 0x7ff);
+ lower_insn = (lower_insn & 0xf800) | (addend & 0x7ff);
+
+ bfd_put_16 (abfd, upper_insn, address);
+ bfd_put_16 (abfd, lower_insn, address + 2);
+ }
+ else
+ {
+ bfd_vma contents;
+
+ contents = bfd_get_32 (abfd, address);
+
+ /* Get the (signed) value from the instruction. */
+ addend = contents & howto->src_mask;
+ if (addend & ((howto->src_mask + 1) >> 1))
+ {
+ bfd_signed_vma mask;
+
+ mask = -1;
+ mask &= ~ howto->src_mask;
+ addend |= mask;
+ }
+
+ /* Add in the increment, (which is a byte value). */
+ switch (howto->type)
+ {
+ default:
+ addend += increment;
+ break;
+
+ case R_ARM_PC24:
+ addend <<= howto->size;
+ addend += increment;
+
+ /* Should we check for overflow here ? */
+
+ /* Drop any undesired bits. */
+ addend >>= howto->rightshift;
+ break;
+ }
+
+ contents = (contents & ~ howto->dst_mask) | (addend & howto->dst_mask);
+
+ bfd_put_32 (abfd, contents, address);
+ }
+}
+#endif /* USE_REL */
/* Relocate an ARM ELF section. */
static boolean
relend = relocs + input_section->reloc_count;
for (; rel < relend; rel++)
{
- int r_type;
- reloc_howto_type * howto;
- unsigned long r_symndx;
- Elf_Internal_Sym * sym;
- asection * sec;
+ int r_type;
+ reloc_howto_type * howto;
+ unsigned long r_symndx;
+ Elf_Internal_Sym * sym;
+ asection * sec;
struct elf_link_hash_entry * h;
- bfd_vma relocation;
- bfd_reloc_status_type r;
+ bfd_vma relocation;
+ bfd_reloc_status_type r;
+ arelent bfd_reloc;
r_symndx = ELF32_R_SYM (rel->r_info);
- r_type = ELF32_R_TYPE (rel->r_info);
+ r_type = ELF32_R_TYPE (rel->r_info);
- if (r_type == R_ARM_GNU_VTENTRY
- || r_type == R_ARM_GNU_VTINHERIT )
+ if ( r_type == R_ARM_GNU_VTENTRY
+ || r_type == R_ARM_GNU_VTINHERIT)
continue;
- /* ScottB: range check r_type here. */
-
- howto = elf32_arm_howto_table + r_type;
+ elf32_arm_info_to_howto (input_bfd, & bfd_reloc, rel);
+ howto = bfd_reloc.howto;
if (info->relocateable)
{
{
sec = local_sections[r_symndx];
#ifdef USE_REL
- {
- bfd_vma val;
- val = bfd_get_32 (input_bfd, contents + rel->r_offset);
- val += (sec->output_offset + sym->st_value);
- bfd_put_32 (input_bfd, val, contents + rel->r_offset);
- }
+ arm_add_to_rel (input_bfd, contents + rel->r_offset,
+ howto, sec->output_offset + sym->st_value);
#else
rel->r_addend += (sec->output_offset + sym->st_value)
>> howto->rightshift;
h = NULL;
sym = NULL;
sec = NULL;
+
if (r_symndx < symtab_hdr->sh_info)
{
sym = local_syms + r_symndx;
else
{
h = sym_hashes[r_symndx - symtab_hdr->sh_info];
- while (h->root.type == bfd_link_hash_indirect
+
+ while ( h->root.type == bfd_link_hash_indirect
|| h->root.type == bfd_link_hash_warning)
h = (struct elf_link_hash_entry *) h->root.u.i.link;
- if (h->root.type == bfd_link_hash_defined
+
+ if ( h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak)
{
+ int relocation_needed = 1;
+
sec = h->root.u.def.section;
-
- relocation = (h->root.u.def.value
- + sec->output_section->vma
- + sec->output_offset);
-
+
/* In these cases, we don't need the relocation value.
- We check specially because in some obscure cases
- sec->output_section will be NULL. */
+ We check specially because in some obscure cases
+ sec->output_section will be NULL. */
switch (r_type)
{
case R_ARM_PC24:
(!info->symbolic && h->dynindx != -1)
|| (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0
)
- && ((input_section->flags & SEC_ALLOC) != 0)
+ && ((input_section->flags & SEC_ALLOC) != 0
+ /* DWARF will emit R_ARM_ABS32 relocations in its
+ sections against symbols defined externally
+ in shared libraries. We can't do anything
+ with them here. */
+ || ((input_section->flags & SEC_DEBUGGING) != 0
+ && (h->elf_link_hash_flags
+ & ELF_LINK_HASH_DEF_DYNAMIC) != 0))
)
- relocation = 0;
+ relocation_needed = 0;
break;
-
+
case R_ARM_GOTPC:
- relocation = 0;
+ relocation_needed = 0;
break;
-
+
case R_ARM_GOT32:
if (elf_hash_table(info)->dynamic_sections_created
&& (!info->shared
|| (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0
)
)
- relocation = 0;
+ relocation_needed = 0;
break;
-
+
case R_ARM_PLT32:
if (h->plt.offset != (bfd_vma)-1)
- relocation = 0;
+ relocation_needed = 0;
break;
-
+
default:
if (sec->output_section == NULL)
{
(_("%s: warning: unresolvable relocation against symbol `%s' from %s section"),
bfd_get_filename (input_bfd), h->root.root.string,
bfd_get_section_name (input_bfd, input_section));
- relocation = 0;
+ relocation_needed = 0;
}
}
+
+ if (relocation_needed)
+ relocation = h->root.u.def.value
+ + sec->output_section->vma
+ + sec->output_offset;
+ else
+ relocation = 0;
}
else if (h->root.type == bfd_link_hash_undefweak)
relocation = 0;
+ else if (info->shared && !info->symbolic
+ && !info->no_undefined
+ && ELF_ST_VISIBILITY (h->other) == STV_DEFAULT)
+ relocation = 0;
else
{
if (!((*info->callbacks->undefined_symbol)
(info, h->root.root.string, input_bfd,
- input_section, rel->r_offset)))
+ input_section, rel->r_offset,
+ (!info->shared || info->no_undefined
+ || ELF_ST_VISIBILITY (h->other)))))
return false;
relocation = 0;
}
if (name == NULL || *name == '\0')
name = bfd_section_name (input_bfd, sec);
}
-
+
r = elf32_arm_final_link_relocate (howto, input_bfd, output_bfd,
input_section, contents, rel,
relocation, info, sec, name,
(h ? ELF_ST_TYPE (h->type) :
- ELF_ST_TYPE (sym->st_info)));
+ ELF_ST_TYPE (sym->st_info)), h);
if (r != bfd_reloc_ok)
{
switch (r)
{
case bfd_reloc_overflow:
- if (!((*info->callbacks->reloc_overflow)
- (info, name, howto->name, (bfd_vma) 0,
- input_bfd, input_section, rel->r_offset)))
- return false;
+ /* If the overflowing reloc was to an undefined symbol,
+ we have already printed one error message and there
+ is no point complaining again. */
+ if ((! h ||
+ h->root.type != bfd_link_hash_undefined)
+ && (!((*info->callbacks->reloc_overflow)
+ (info, name, howto->name, (bfd_vma) 0,
+ input_bfd, input_section, rel->r_offset))))
+ return false;
break;
case bfd_reloc_undefined:
if (!((*info->callbacks->undefined_symbol)
(info, name, input_bfd, input_section,
- rel->r_offset)))
+ rel->r_offset, true)))
return false;
break;
case bfd_reloc_outofrange:
- msg = _ ("internal error: out of range error");
+ msg = _("internal error: out of range error");
goto common_error;
case bfd_reloc_notsupported:
- msg = _ ("internal error: unsupported relocation error");
+ msg = _("internal error: unsupported relocation error");
goto common_error;
case bfd_reloc_dangerous:
- msg = _ ("internal error: dangerous error");
+ msg = _("internal error: dangerous error");
goto common_error;
default:
- msg = _ ("internal error: unknown error");
+ msg = _("internal error: unknown error");
/* fall through */
common_error:
return true;
}
-/* Function to keep ARM specific flags in the ELF header. */
+/* Function to keep ARM specific flags in the ELF header. */
static boolean
elf32_arm_set_private_flags (abfd, flags)
bfd *abfd;
if (elf_flags_init (abfd)
&& elf_elfheader (abfd)->e_flags != flags)
{
- if (flags & EF_INTERWORK)
- _bfd_error_handler (_ ("\
+ if (EF_ARM_EABI_VERSION (flags) == EF_ARM_EABI_UNKNOWN)
+ {
+ if (flags & EF_ARM_INTERWORK)
+ _bfd_error_handler (_("\
Warning: Not setting interwork flag of %s since it has already been specified as non-interworking"),
- bfd_get_filename (abfd));
- else
- _bfd_error_handler (_ ("\
+ bfd_get_filename (abfd));
+ else
+ _bfd_error_handler (_("\
Warning: Clearing the interwork flag of %s due to outside request"),
- bfd_get_filename (abfd));
+ bfd_get_filename (abfd));
+ }
}
else
{
return true;
}
-/* Copy backend specific data from one object module to another */
+/* Copy backend specific data from one object module to another. */
+
static boolean
elf32_arm_copy_private_bfd_data (ibfd, obfd)
bfd *ibfd;
flagword in_flags;
flagword out_flags;
- if (bfd_get_flavour (ibfd) != bfd_target_elf_flavour
+ if ( bfd_get_flavour (ibfd) != bfd_target_elf_flavour
|| bfd_get_flavour (obfd) != bfd_target_elf_flavour)
return true;
- in_flags = elf_elfheader (ibfd)->e_flags;
+ in_flags = elf_elfheader (ibfd)->e_flags;
out_flags = elf_elfheader (obfd)->e_flags;
- if (elf_flags_init (obfd) && in_flags != out_flags)
+ if (elf_flags_init (obfd)
+ && EF_ARM_EABI_VERSION (out_flags) == EF_ARM_EABI_UNKNOWN
+ && in_flags != out_flags)
{
- /* Cannot mix PIC and non-PIC code. */
- if ((in_flags & EF_PIC) != (out_flags & EF_PIC))
- return false;
-
/* Cannot mix APCS26 and APCS32 code. */
- if ((in_flags & EF_APCS_26) != (out_flags & EF_APCS_26))
+ if ((in_flags & EF_ARM_APCS_26) != (out_flags & EF_ARM_APCS_26))
return false;
/* Cannot mix float APCS and non-float APCS code. */
- if ((in_flags & EF_APCS_FLOAT) != (out_flags & EF_APCS_FLOAT))
+ if ((in_flags & EF_ARM_APCS_FLOAT) != (out_flags & EF_ARM_APCS_FLOAT))
return false;
/* If the src and dest have different interworking flags
then turn off the interworking bit. */
- if ((in_flags & EF_INTERWORK) != (out_flags & EF_INTERWORK))
+ if ((in_flags & EF_ARM_INTERWORK) != (out_flags & EF_ARM_INTERWORK))
{
- if (out_flags & EF_INTERWORK)
- _bfd_error_handler (_ ("\
+ if (out_flags & EF_ARM_INTERWORK)
+ _bfd_error_handler (_("\
Warning: Clearing the interwork flag in %s because non-interworking code in %s has been linked with it"),
bfd_get_filename (obfd), bfd_get_filename (ibfd));
- in_flags &= ~EF_INTERWORK;
+ in_flags &= ~EF_ARM_INTERWORK;
}
+
+ /* Likewise for PIC, though don't warn for this case. */
+ if ((in_flags & EF_ARM_PIC) != (out_flags & EF_ARM_PIC))
+ in_flags &= ~EF_ARM_PIC;
}
elf_elfheader (obfd)->e_flags = in_flags;
/* Merge backend specific data from an object file to the output
object file when linking. */
+
static boolean
elf32_arm_merge_private_bfd_data (ibfd, obfd)
- bfd *ibfd;
- bfd *obfd;
+ bfd * ibfd;
+ bfd * obfd;
{
flagword out_flags;
flagword in_flags;
+ boolean flags_compatible = true;
+ boolean null_input_bfd = true;
+ asection *sec;
+
+ /* Check if we have the same endianess. */
+ if (_bfd_generic_verify_endian_match (ibfd, obfd) == false)
+ return false;
if ( bfd_get_flavour (ibfd) != bfd_target_elf_flavour
|| bfd_get_flavour (obfd) != bfd_target_elf_flavour)
return true;
- /* Check if we have the same endianess */
- if ( ibfd->xvec->byteorder != obfd->xvec->byteorder
- && obfd->xvec->byteorder != BFD_ENDIAN_UNKNOWN
- && ibfd->xvec->byteorder != BFD_ENDIAN_UNKNOWN)
- {
- (*_bfd_error_handler)
- (_("%s: compiled for a %s endian system and target is %s endian"),
- bfd_get_filename (ibfd),
- bfd_big_endian (ibfd) ? "big" : "little",
- bfd_big_endian (obfd) ? "big" : "little");
-
- bfd_set_error (bfd_error_wrong_format);
- return false;
- }
-
/* The input BFD must have had its flags initialised. */
/* The following seems bogus to me -- The flags are initialized in
the assembler but I don't think an elf_flags_init field is
- written into the object */
+ written into the object. */
/* BFD_ASSERT (elf_flags_init (ibfd)); */
in_flags = elf_elfheader (ibfd)->e_flags;
if (!elf_flags_init (obfd))
{
- /* If the input is the default architecture then do not
- bother setting the flags for the output architecture,
- instead allow future merges to do this. If no future
- merges ever set these flags then they will retain their
- unitialised values, which surprise surprise, correspond
+ /* If the input is the default architecture and had the default
+ flags then do not bother setting the flags for the output
+ architecture, instead allow future merges to do this. If no
+ future merges ever set these flags then they will retain their
+ uninitialised values, which surprise surprise, correspond
to the default values. */
- if (bfd_get_arch_info (ibfd)->the_default)
+ if (bfd_get_arch_info (ibfd)->the_default
+ && elf_elfheader (ibfd)->e_flags == 0)
return true;
elf_flags_init (obfd) = true;
return true;
}
- /* Check flag compatibility. */
+ /* Identical flags must be compatible. */
if (in_flags == out_flags)
return true;
+ /* Check to see if the input BFD actually contains any sections.
+ If not, its flags may not have been initialised either, but it cannot
+ actually cause any incompatibility. */
+ for (sec = ibfd->sections; sec != NULL; sec = sec->next)
+ {
+ /* Ignore synthetic glue sections. */
+ if (strcmp (sec->name, ".glue_7")
+ && strcmp (sec->name, ".glue_7t"))
+ {
+ null_input_bfd = false;
+ break;
+ }
+ }
+ if (null_input_bfd)
+ return true;
+
/* Complain about various flag mismatches. */
+ if (EF_ARM_EABI_VERSION (in_flags) != EF_ARM_EABI_VERSION (out_flags))
+ {
+ _bfd_error_handler (_("\
+Error: %s compiled for EABI version %d, whereas %s is compiled for version %d"),
+ bfd_get_filename (ibfd),
+ (in_flags & EF_ARM_EABIMASK) >> 24,
+ bfd_get_filename (obfd),
+ (out_flags & EF_ARM_EABIMASK) >> 24);
+ return false;
+ }
- if ((in_flags & EF_APCS_26) != (out_flags & EF_APCS_26))
- _bfd_error_handler (_ ("\
+ /* Not sure what needs to be checked for EABI versions >= 1. */
+ if (EF_ARM_EABI_VERSION (in_flags) == EF_ARM_EABI_UNKNOWN)
+ {
+ if ((in_flags & EF_ARM_APCS_26) != (out_flags & EF_ARM_APCS_26))
+ {
+ _bfd_error_handler (_("\
Error: %s compiled for APCS-%d, whereas %s is compiled for APCS-%d"),
bfd_get_filename (ibfd),
- in_flags & EF_APCS_26 ? 26 : 32,
+ in_flags & EF_ARM_APCS_26 ? 26 : 32,
bfd_get_filename (obfd),
- out_flags & EF_APCS_26 ? 26 : 32);
+ out_flags & EF_ARM_APCS_26 ? 26 : 32);
+ flags_compatible = false;
+ }
- if ((in_flags & EF_APCS_FLOAT) != (out_flags & EF_APCS_FLOAT))
- _bfd_error_handler (_ ("\
+ if ((in_flags & EF_ARM_APCS_FLOAT) != (out_flags & EF_ARM_APCS_FLOAT))
+ {
+ _bfd_error_handler (_("\
Error: %s passes floats in %s registers, whereas %s passes them in %s registers"),
bfd_get_filename (ibfd),
- in_flags & EF_APCS_FLOAT ? _ ("float") : _ ("integer"),
+ in_flags & EF_ARM_APCS_FLOAT ? _("float") : _("integer"),
bfd_get_filename (obfd),
- out_flags & EF_APCS_26 ? _ ("float") : _ ("integer"));
+ out_flags & EF_ARM_APCS_26 ? _("float") : _("integer"));
+ flags_compatible = false;
+ }
- if ((in_flags & EF_PIC) != (out_flags & EF_PIC))
- _bfd_error_handler (_ ("\
-Error: %s is compiled as position %s code, whereas %s is not"),
- bfd_get_filename (ibfd),
- in_flags & EF_PIC ? _ ("independent") : _ ("dependent"),
- bfd_get_filename (obfd));
+#ifdef EF_ARM_SOFT_FLOAT
+ if ((in_flags & EF_ARM_SOFT_FLOAT) != (out_flags & EF_ARM_SOFT_FLOAT))
+ {
+ _bfd_error_handler (_ ("\
+Error: %s uses %s floating point, whereas %s uses %s floating point"),
+ bfd_get_filename (ibfd),
+ in_flags & EF_ARM_SOFT_FLOAT ? _("soft") : _("hard"),
+ bfd_get_filename (obfd),
+ out_flags & EF_ARM_SOFT_FLOAT ? _("soft") : _("hard"));
+ flags_compatible = false;
+ }
+#endif
- /* Interworking mismatch is only a warning. */
- if ((in_flags & EF_INTERWORK) != (out_flags & EF_INTERWORK))
- {
- _bfd_error_handler (_ ("\
+ /* Interworking mismatch is only a warning. */
+ if ((in_flags & EF_ARM_INTERWORK) != (out_flags & EF_ARM_INTERWORK))
+ _bfd_error_handler (_("\
Warning: %s %s interworking, whereas %s %s"),
- bfd_get_filename (ibfd),
- in_flags & EF_INTERWORK ? _ ("supports") : _ ("does not support"),
- bfd_get_filename (obfd),
- out_flags & EF_INTERWORK ? _ ("does not") : _ ("does"));
- return true;
+ bfd_get_filename (ibfd),
+ in_flags & EF_ARM_INTERWORK ? _("supports") : _("does not support"),
+ bfd_get_filename (obfd),
+ out_flags & EF_ARM_INTERWORK ? _("does") : _("does not"));
}
- return false;
+ return flags_compatible;
}
-/* Display the flags field */
+/* Display the flags field. */
+
static boolean
elf32_arm_print_private_bfd_data (abfd, ptr)
bfd *abfd;
PTR ptr;
{
- FILE *file = (FILE *) ptr;
+ FILE * file = (FILE *) ptr;
+ unsigned long flags;
BFD_ASSERT (abfd != NULL && ptr != NULL);
/* Print normal ELF private data. */
_bfd_elf_print_private_bfd_data (abfd, ptr);
- /* Ignore init flag - it may not be set, despite the flags field containing valid data. */
+ flags = elf_elfheader (abfd)->e_flags;
+ /* Ignore init flag - it may not be set, despite the flags field
+ containing valid data. */
/* xgettext:c-format */
- fprintf (file, _ ("private flags = %lx:"), elf_elfheader (abfd)->e_flags);
+ fprintf (file, _("private flags = %lx:"), elf_elfheader (abfd)->e_flags);
- if (elf_elfheader (abfd)->e_flags & EF_INTERWORK)
- fprintf (file, _ (" [interworking enabled]"));
- else
- fprintf (file, _ (" [interworking not enabled]"));
+ switch (EF_ARM_EABI_VERSION (flags))
+ {
+ case EF_ARM_EABI_UNKNOWN:
+ /* The following flag bits are GNU extenstions and not part of the
+ official ARM ELF extended ABI. Hence they are only decoded if
+ the EABI version is not set. */
+ if (flags & EF_ARM_INTERWORK)
+ fprintf (file, _(" [interworking enabled]"));
+
+ if (flags & EF_ARM_APCS_26)
+ fprintf (file, _(" [APCS-26]"));
+ else
+ fprintf (file, _(" [APCS-32]"));
- if (elf_elfheader (abfd)->e_flags & EF_APCS_26)
- fprintf (file, _ (" [APCS-26]"));
- else
- fprintf (file, _ (" [APCS-32]"));
+ if (flags & EF_ARM_APCS_FLOAT)
+ fprintf (file, _(" [floats passed in float registers]"));
- if (elf_elfheader (abfd)->e_flags & EF_APCS_FLOAT)
- fprintf (file, _ (" [floats passed in float registers]"));
- else
- fprintf (file, _ (" [floats passed in integer registers]"));
+ if (flags & EF_ARM_PIC)
+ fprintf (file, _(" [position independent]"));
- if (elf_elfheader (abfd)->e_flags & EF_PIC)
- fprintf (file, _ (" [position independent]"));
- else
- fprintf (file, _ (" [absolute position]"));
+ if (flags & EF_ARM_NEW_ABI)
+ fprintf (file, _(" [new ABI]"));
+
+ if (flags & EF_ARM_OLD_ABI)
+ fprintf (file, _(" [old ABI]"));
+
+ if (flags & EF_ARM_SOFT_FLOAT)
+ fprintf (file, _(" [software FP]"));
+
+ flags &= ~(EF_ARM_INTERWORK | EF_ARM_APCS_26 | EF_ARM_APCS_FLOAT | EF_ARM_PIC
+ | EF_ARM_NEW_ABI | EF_ARM_OLD_ABI | EF_ARM_SOFT_FLOAT);
+ break;
+
+ case EF_ARM_EABI_VER1:
+ fprintf (file, _(" [Version1 EABI]"));
+
+ if (flags & EF_ARM_SYMSARESORTED)
+ fprintf (file, _(" [sorted symbol table]"));
+ else
+ fprintf (file, _(" [unsorted symbol table]"));
+
+ flags &= ~ EF_ARM_SYMSARESORTED;
+ break;
+
+ case EF_ARM_EABI_VER2:
+ fprintf (file, _(" [Version2 EABI]"));
+
+ if (flags & EF_ARM_SYMSARESORTED)
+ fprintf (file, _(" [sorted symbol table]"));
+ else
+ fprintf (file, _(" [unsorted symbol table]"));
+
+ if (flags & EF_ARM_DYNSYMSUSESEGIDX)
+ fprintf (file, _(" [dynamic symbols use segment index]"));
+
+ if (flags & EF_ARM_MAPSYMSFIRST)
+ fprintf (file, _(" [mapping symbols precede others]"));
+
+ flags &= ~(EF_ARM_SYMSARESORTED | EF_ARM_DYNSYMSUSESEGIDX
+ | EF_ARM_MAPSYMSFIRST);
+ break;
+
+ default:
+ fprintf (file, _(" <EABI version unrecognised>"));
+ break;
+ }
+
+ flags &= ~ EF_ARM_EABIMASK;
+
+ if (flags & EF_ARM_RELEXEC)
+ fprintf (file, _(" [relocatable executable]"));
+
+ if (flags & EF_ARM_HASENTRY)
+ fprintf (file, _(" [has entry point]"));
+
+ flags &= ~ (EF_ARM_RELEXEC | EF_ARM_HASENTRY);
+
+ if (flags)
+ fprintf (file, _("<Unrecognised flag bits set>"));
fputc ('\n', file);
Elf_Internal_Sym * elf_sym;
int type;
{
- if (ELF_ST_TYPE (elf_sym->st_info) == STT_ARM_TFUNC)
- return ELF_ST_TYPE (elf_sym->st_info);
- else
- return type;
+ switch (ELF_ST_TYPE (elf_sym->st_info))
+ {
+ case STT_ARM_TFUNC:
+ return ELF_ST_TYPE (elf_sym->st_info);
+
+ case STT_ARM_16BIT:
+ /* If the symbol is not an object, return the STT_ARM_16BIT flag.
+ This allows us to distinguish between data used by Thumb instructions
+ and non-data (which is probably code) inside Thumb regions of an
+ executable. */
+ if (type != STT_OBJECT)
+ return ELF_ST_TYPE (elf_sym->st_info);
+ break;
+
+ default:
+ break;
+ }
+
+ return type;
}
-
+
static asection *
elf32_arm_gc_mark_hook (abfd, info, rel, h, sym)
bfd *abfd;
- struct bfd_link_info *info;
+ struct bfd_link_info *info ATTRIBUTE_UNUSED;
Elf_Internal_Rela *rel;
struct elf_link_hash_entry *h;
Elf_Internal_Sym *sym;
case bfd_link_hash_common:
return h->root.u.c.p->section;
+
+ default:
+ break;
}
}
}
return NULL;
}
+/* Update the got entry reference counts for the section being removed. */
+
static boolean
elf32_arm_gc_sweep_hook (abfd, info, sec, relocs)
- bfd *abfd;
- struct bfd_link_info *info;
- asection *sec;
- const Elf_Internal_Rela *relocs;
+ bfd *abfd ATTRIBUTE_UNUSED;
+ struct bfd_link_info *info ATTRIBUTE_UNUSED;
+ asection *sec ATTRIBUTE_UNUSED;
+ const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED;
{
- /* we don't use got and plt entries for armelf */
+ /* We don't support garbage collection of GOT and PLT relocs yet. */
return true;
}
-/* Look through the relocs for a section during the first phase.
- Since we don't do .gots or .plts, we just need to consider the
- virtual table relocs for gc. */
-
+/* Look through the relocs for a section during the first phase. */
+
static boolean
elf32_arm_check_relocs (abfd, info, sec, relocs)
bfd * abfd;
bfd * dynobj;
asection * sgot, *srelgot, *sreloc;
bfd_vma * local_got_offsets;
-
+
if (info->relocateable)
return true;
-
+
sgot = srelgot = sreloc = NULL;
-
+
dynobj = elf_hash_table (info)->dynobj;
local_got_offsets = elf_local_got_offsets (abfd);
-
+
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (abfd);
- sym_hashes_end = sym_hashes + symtab_hdr->sh_size/sizeof(Elf32_External_Sym);
+ sym_hashes_end = sym_hashes
+ + symtab_hdr->sh_size / sizeof (Elf32_External_Sym);
+
if (!elf_bad_symtab (abfd))
sym_hashes_end -= symtab_hdr->sh_info;
-
+
rel_end = relocs + sec->reloc_count;
for (rel = relocs; rel < rel_end; rel++)
{
struct elf_link_hash_entry *h;
unsigned long r_symndx;
-
+
r_symndx = ELF32_R_SYM (rel->r_info);
if (r_symndx < symtab_hdr->sh_info)
h = NULL;
else
h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-
+
/* Some relocs require a global offset table. */
if (dynobj == NULL)
{
&& (h != NULL || info->shared))
{
srelgot = bfd_get_section_by_name (dynobj, ".rel.got");
-
+
/* If no got relocation section, make one and initialize. */
if (srelgot == NULL)
{
if (h->got.offset != (bfd_vma) -1)
/* We have already allocated space in the .got. */
break;
-
+
h->got.offset = sgot->_raw_size;
/* Make sure this symbol is output as a dynamic symbol. */
for (i = 0; i < symtab_hdr->sh_info; i++)
local_got_offsets[i] = (bfd_vma) -1;
}
-
+
if (local_got_offsets[r_symndx] != (bfd_vma) -1)
/* We have already allocated space in the .got. */
break;
{
p = ((struct elf32_arm_pcrel_relocs_copied *)
bfd_alloc (dynobj, sizeof * p));
-
+
if (p == NULL)
return false;
p->next = eh->pcrel_relocs_copied;
if (!_bfd_elf32_gc_record_vtinherit (abfd, sec, h, rel->r_offset))
return false;
break;
-
+
/* This relocation describes which C++ vtable entries are actually
used. Record for later use during GC. */
case R_ARM_GNU_VTENTRY:
- if (!_bfd_elf32_gc_record_vtentry (abfd, sec, h, rel->r_addend))
+ if (!_bfd_elf32_gc_record_vtentry (abfd, sec, h, rel->r_offset))
return false;
break;
}
}
-
+
return true;
}
-
/* Find the nearest line to a particular section and offset, for error
reporting. This code is a duplicate of the code in elf.c, except
- that it also accepts STT_ARM_TFUNC as a symbol that names a function. */
+ that it also accepts STT_ARM_TFUNC as a symbol that names a function. */
static boolean
elf32_arm_find_nearest_line
asymbol ** p;
if (_bfd_dwarf2_find_nearest_line (abfd, section, symbols, offset,
- filename_ptr, functionname_ptr,
- line_ptr))
+ filename_ptr, functionname_ptr,
+ line_ptr, 0,
+ &elf_tdata (abfd)->dwarf2_find_line_info))
return true;
if (! _bfd_stab_section_find_nearest_line (abfd, symbols, section, offset,
functionname_ptr, line_ptr,
&elf_tdata (abfd)->line_info))
return false;
-
+
if (found)
return true;
*filename_ptr = filename;
*functionname_ptr = bfd_asymbol_name (func);
*line_ptr = 0;
-
+
return true;
}
/* We also need to make an entry in the .got.plt section, which
will be placed in the .got section by the linker script. */
-
s = bfd_get_section_by_name (dynobj, ".got.plt");
BFD_ASSERT (s != NULL);
s->_raw_size += 4;
determine the address it must put in the global offset table, so
both the dynamic object and the regular object will refer to the
same memory location for the variable. */
-
s = bfd_get_section_by_name (dynobj, ".dynbss");
BFD_ASSERT (s != NULL);
outname = bfd_get_section_name (output_bfd,
s->output_section);
target = bfd_get_section_by_name (output_bfd, outname + 4);
+
if (target != NULL
&& (target->flags & SEC_READONLY) != 0
&& (target->flags & SEC_ALLOC) != 0)
if (plt)
{
- if (! bfd_elf32_add_dynamic_entry (info, DT_PLTGOT, 0)
+ if ( ! bfd_elf32_add_dynamic_entry (info, DT_PLTGOT, 0)
|| ! bfd_elf32_add_dynamic_entry (info, DT_PLTRELSZ, 0)
|| ! bfd_elf32_add_dynamic_entry (info, DT_PLTREL, DT_REL)
|| ! bfd_elf32_add_dynamic_entry (info, DT_JMPREL, 0))
if (relocs)
{
- if (! bfd_elf32_add_dynamic_entry (info, DT_REL, 0)
+ if ( ! bfd_elf32_add_dynamic_entry (info, DT_REL, 0)
|| ! bfd_elf32_add_dynamic_entry (info, DT_RELSZ, 0)
|| ! bfd_elf32_add_dynamic_entry (info, DT_RELENT,
sizeof (Elf32_External_Rel)))
{
if (! bfd_elf32_add_dynamic_entry (info, DT_TEXTREL, 0))
return false;
+ info->flags |= DF_TEXTREL;
}
}
static boolean
elf32_arm_discard_copies (h, ignore)
struct elf32_arm_link_hash_entry * h;
- PTR ignore;
+ PTR ignore ATTRIBUTE_UNUSED;
{
struct elf32_arm_pcrel_relocs_copied * s;
got_offset = (plt_index + 3) * 4;
/* Fill in the entry in the procedure linkage table. */
- memcpy (splt->contents + h->plt.offset,
- elf32_arm_plt_entry,
- PLT_ENTRY_SIZE);
+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[0],
+ splt->contents + h->plt.offset + 0);
+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[1],
+ splt->contents + h->plt.offset + 4);
+ bfd_put_32 (output_bfd, elf32_arm_plt_entry[2],
+ splt->contents + h->plt.offset + 8);
bfd_put_32 (output_bfd,
(sgot->output_section->vma
+ sgot->output_offset
- + got_offset
+ + got_offset
- splt->output_section->vma
- splt->output_offset
- h->plt.offset - 12),
/* Mark the symbol as undefined, rather than as defined in
the .plt section. Leave the value alone. */
sym->st_shndx = SHN_UNDEF;
+ /* If the symbol is weak, we do need to clear the value.
+ Otherwise, the PLT entry would provide a definition for
+ the symbol even if the symbol wasn't defined anywhere,
+ and so the symbol would never be NULL. */
+ if ((h->elf_link_hash_flags & ELF_LINK_HASH_REF_REGULAR_NONWEAK)
+ == 0)
+ sym->st_value = 0;
}
}
/* This symbol has an entry in the global offset table. Set it
up. */
-
sgot = bfd_get_section_by_name (dynobj, ".got");
srel = bfd_get_section_by_name (dynobj, ".rel.got");
BFD_ASSERT (sgot != NULL && srel != NULL);
Elf_Internal_Rel rel;
/* This symbol needs a copy reloc. Set it up. */
-
BFD_ASSERT (h->dynindx != -1
&& (h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak));
dyncon = (Elf32_External_Dyn *) sdyn->contents;
dynconend = (Elf32_External_Dyn *) (sdyn->contents + sdyn->_raw_size);
+
for (; dyncon < dynconend; dyncon++)
{
Elf_Internal_Dyn dyn;
/* Fill in the first entry in the procedure linkage table. */
if (splt->_raw_size > 0)
- memcpy (splt->contents, elf32_arm_plt0_entry, PLT_ENTRY_SIZE);
+ {
+ bfd_put_32 (output_bfd, elf32_arm_plt0_entry[0], splt->contents + 0);
+ bfd_put_32 (output_bfd, elf32_arm_plt0_entry[1], splt->contents + 4);
+ bfd_put_32 (output_bfd, elf32_arm_plt0_entry[2], splt->contents + 8);
+ bfd_put_32 (output_bfd, elf32_arm_plt0_entry[3], splt->contents + 12);
+ }
/* UnixWare sets the entsize of .plt to 4, although that doesn't
really seem like the right value. */
return true;
}
+static void
+elf32_arm_post_process_headers (abfd, link_info)
+ bfd * abfd;
+ struct bfd_link_info * link_info ATTRIBUTE_UNUSED;
+{
+ Elf_Internal_Ehdr * i_ehdrp; /* ELF file header, internal form. */
+
+ i_ehdrp = elf_elfheader (abfd);
+
+ i_ehdrp->e_ident[EI_OSABI] = ARM_ELF_OS_ABI_VERSION;
+ i_ehdrp->e_ident[EI_ABIVERSION] = ARM_ELF_ABI_VERSION;
+}
+
#define ELF_ARCH bfd_arch_arm
#define ELF_MACHINE_CODE EM_ARM
-#define ELF_MAXPAGE_SIZE 0x8000
-
+#define ELF_MAXPAGESIZE 0x8000
#define bfd_elf32_bfd_copy_private_bfd_data elf32_arm_copy_private_bfd_data
#define bfd_elf32_bfd_merge_private_bfd_data elf32_arm_merge_private_bfd_data
#define elf_backend_finish_dynamic_symbol elf32_arm_finish_dynamic_symbol
#define elf_backend_finish_dynamic_sections elf32_arm_finish_dynamic_sections
#define elf_backend_size_dynamic_sections elf32_arm_size_dynamic_sections
+#define elf_backend_post_process_headers elf32_arm_post_process_headers
#define elf_backend_can_gc_sections 1
#define elf_backend_plt_readonly 1
#define elf_backend_want_got_plt 1
#define elf_backend_want_plt_sym 0
+#define elf_backend_got_header_size 12
+#define elf_backend_plt_header_size PLT_ENTRY_SIZE
+
#include "elf32-target.h"