/* AVR-specific support for 32-bit ELF
Copyright 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
- 2010, 2011 Free Software Foundation, Inc.
+ 2010, 2011, 2012
+ Free Software Foundation, Inc.
Contributed by Denis Chertykov <denisc@overta.ru>
This file is part of BFD, the Binary File Descriptor library.
0x000000ff, /* src_mask */
0x000000ff, /* dst_mask */
FALSE), /* pcrel_offset */
+ /* lo8-part to use in .byte lo8(sym). */
+ HOWTO (R_AVR_8_LO8, /* type */
+ 0, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_AVR_8_LO8", /* name */
+ FALSE, /* partial_inplace */
+ 0xffffff, /* src_mask */
+ 0xffffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
+ /* hi8-part to use in .byte hi8(sym). */
+ HOWTO (R_AVR_8_HI8, /* type */
+ 8, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_AVR_8_HI8", /* name */
+ FALSE, /* partial_inplace */
+ 0xffffff, /* src_mask */
+ 0xffffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
+ /* hlo8-part to use in .byte hlo8(sym). */
+ HOWTO (R_AVR_8_HLO8, /* type */
+ 16, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_AVR_8_HLO8", /* name */
+ FALSE, /* partial_inplace */
+ 0xffffff, /* src_mask */
+ 0xffffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
};
/* Map BFD reloc types to AVR ELF reloc types. */
{ BFD_RELOC_AVR_LDI, R_AVR_LDI },
{ BFD_RELOC_AVR_6, R_AVR_6 },
{ BFD_RELOC_AVR_6_ADIW, R_AVR_6_ADIW },
- { BFD_RELOC_8, R_AVR_8 }
+ { BFD_RELOC_8, R_AVR_8 },
+ { BFD_RELOC_AVR_8_LO, R_AVR_8_LO8 },
+ { BFD_RELOC_AVR_8_HI, R_AVR_8_HI8 },
+ { BFD_RELOC_AVR_8_HLO, R_AVR_8_HLO8 }
};
/* Meant to be filled one day with the wrap around address for the
name = h->root.root.string;
}
- if (sec != NULL && elf_discarded_section (sec))
+ if (sec != NULL && discarded_section (sec))
RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section,
- rel, relend, howto, contents);
+ rel, 1, relend, howto, 0, contents);
if (info->relocatable)
continue;
bfd_vma symval;
bfd_vma shrinked_insn_address;
+ if (isec->reloc_count == 0)
+ continue;
+
shrinked_insn_address = (sec->output_section->vma
+ sec->output_offset + addr - count);
- irelend = elf_section_data (isec)->relocs + isec->reloc_count;
- for (irel = elf_section_data (isec)->relocs;
+ irel = elf_section_data (isec)->relocs;
+ /* PR 12161: Read in the relocs for this section if necessary. */
+ if (irel == NULL)
+ irel = _bfd_elf_link_read_relocs (abfd, isec, NULL, NULL, TRUE);
+
+ for (irelend = irel + isec->reloc_count;
irel < irelend;
irel++)
{
Elf_Internal_Sym *isymbuf = NULL;
struct elf32_avr_link_hash_table *htab;
+ /* If 'shrinkable' is FALSE, do not shrink by deleting bytes while
+ relaxing. Such shrinking can cause issues for the sections such
+ as .vectors and .jumptables. Instead the unused bytes should be
+ filled with nop instructions. */
+ bfd_boolean shrinkable = TRUE;
+
+ if (!strcmp (sec->name,".vectors")
+ || !strcmp (sec->name,".jumptables"))
+ shrinkable = FALSE;
+
if (link_info->relocatable)
(*link_info->callbacks->einfo)
(_("%P%F: --relax and -r may not be used together\n"));
/* Compute the distance from this insn to the branch target. */
gap = value - dot;
- /* If the distance is within -4094..+4098 inclusive, then we can
- relax this jump/call. +4098 because the call/jump target
- will be closer after the relaxation. */
- if ((int) gap >= -4094 && (int) gap <= 4098)
+ /* Check if the gap falls in the range that can be accommodated
+ in 13bits signed (It is 12bits when encoded, as we deal with
+ word addressing). */
+ if (!shrinkable && ((int) gap >= -4096 && (int) gap <= 4095))
+ distance_short_enough = 1;
+ /* If shrinkable, then we can check for a range of distance which
+ is two bytes farther on both the directions because the call
+ or jump target will be closer by two bytes after the
+ relaxation. */
+ else if (shrinkable && ((int) gap >= -4094 && (int) gap <= 4097))
distance_short_enough = 1;
/* Here we handle the wrap-around case. E.g. for a 16k device
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_AVR_13_PCREL);
- /* Check for the vector section. There we don't want to
- modify the ordering! */
-
- if (!strcmp (sec->name,".vectors")
- || !strcmp (sec->name,".jumptables"))
+ /* We should not modify the ordering if 'shrinkable' is
+ FALSE. */
+ if (!shrinkable)
{
/* Let's insert a nop. */
bfd_put_8 (abfd, 0x00, contents + irel->r_offset + 2);