/* MSP430-specific support for 32-bit ELF
- Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007
- Free Software Foundation, Inc.
+ Copyright (C) 2002-2017 Free Software Foundation, Inc.
Contributed by Dmitry Diky <diwil@mail.ru>
This file is part of BFD, the Binary File Descriptor library.
#include "elf-bfd.h"
#include "elf/msp430.h"
-/* Use RELA instead of REL. */
-#undef USE_REL
+static bfd_reloc_status_type
+rl78_sym_diff_handler (bfd * abfd,
+ arelent * reloc,
+ asymbol * sym ATTRIBUTE_UNUSED,
+ void * addr ATTRIBUTE_UNUSED,
+ asection * input_sec,
+ bfd * out_bfd ATTRIBUTE_UNUSED,
+ char ** error_message ATTRIBUTE_UNUSED)
+{
+ bfd_size_type octets;
+ octets = reloc->address * bfd_octets_per_byte (abfd);
+
+ /* Catch the case where bfd_install_relocation would return
+ bfd_reloc_outofrange because the SYM_DIFF reloc is being used in a very
+ small section. It does not actually matter if this happens because all
+ that SYM_DIFF does is compute a (4-byte) value. A second reloc then uses
+ this value, and it is that reloc that must fit into the section.
+
+ This happens in eg, gcc/testsuite/gcc.c-torture/compile/labels-3.c. */
+ if ((octets + bfd_get_reloc_size (reloc->howto))
+ > bfd_get_section_limit_octets (abfd, input_sec))
+ return bfd_reloc_ok;
+ return bfd_reloc_continue;
+}
static reloc_howto_type elf_msp430_howto_table[] =
{
HOWTO (R_MSP430_NONE, /* type */
0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 32, /* bitsize */
+ 3, /* size (0 = byte, 1 = short, 2 = long) */
+ 0, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
- complain_overflow_bitfield,/* complain_on_overflow */
+ complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_NONE", /* name */
FALSE, /* partial_inplace */
0xffffffff, /* dst_mask */
FALSE), /* pcrel_offset */
- /* A 13 bit PC relative relocation. */
+ /* A 10 bit PC relative relocation. */
HOWTO (R_MSP430_10_PCREL, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
- "R_MSP430_13_PCREL", /* name */
+ "R_MSP430_10_PCREL", /* name */
FALSE, /* partial_inplace */
- 0xfff, /* src_mask */
- 0xfff, /* dst_mask */
+ 0x3ff, /* src_mask */
+ 0x3ff, /* dst_mask */
TRUE), /* pcrel_offset */
/* A 16 bit absolute relocation. */
0xffff, /* dst_mask */
FALSE), /* pcrel_offset */
- /* A 16 bit absolute relocation for command address. */
+ /* A 16 bit PC relative relocation for command address. */
HOWTO (R_MSP430_16_PCREL, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
- /* A 13 bit PC relative relocation for complicated polymorphs. */
+ /* A 10 bit PC relative relocation for complicated polymorphs. */
HOWTO (R_MSP430_2X_PCREL, /* type */
1, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_2X_PCREL", /* name */
FALSE, /* partial_inplace */
- 0xfff, /* src_mask */
- 0xfff, /* dst_mask */
+ 0x3ff, /* src_mask */
+ 0x3ff, /* dst_mask */
TRUE), /* pcrel_offset */
/* A 16 bit relaxable relocation for command address. */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE) /* pcrel_offset */
+
+ /* A 8-bit absolute relocation. */
+ , HOWTO (R_MSP430_8, /* type */
+ 0, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_8", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
+
+ /* Together with a following reloc, allows for the difference
+ between two symbols to be the real addend of the second reloc. */
+ HOWTO (R_MSP430_SYM_DIFF, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ rl78_sym_diff_handler, /* special handler. */
+ "R_MSP430_SYM_DIFF", /* name */
+ FALSE, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ FALSE) /* pcrel_offset */
+};
+
+static reloc_howto_type elf_msp430x_howto_table[] =
+{
+ HOWTO (R_MSP430_NONE, /* type */
+ 0, /* rightshift */
+ 3, /* size (0 = byte, 1 = short, 2 = long) */
+ 0, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_NONE", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0, /* dst_mask */
+ FALSE), /* pcrel_offset */
+
+ HOWTO (R_MSP430_ABS32, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_ABS32", /* name */
+ FALSE, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
+
+ HOWTO (R_MSP430_ABS16, /* type */
+ 0, /* rightshift */
+ 1, /* size (0 = byte, 1 = short, 2 = long) */
+ 16, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_ABS16", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ FALSE), /* pcrel_offset */
+
+ HOWTO (R_MSP430_ABS8, /* type */
+ 0, /* rightshift */
+ 0, /* size (0 = byte, 1 = short, 2 = long) */
+ 8, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_ABS8", /* name */
+ FALSE, /* partial_inplace */
+ 0xff, /* src_mask */
+ 0xff, /* dst_mask */
+ FALSE), /* pcrel_offset */
+
+ HOWTO (R_MSP430_PCR16, /* type */
+ 1, /* rightshift */
+ 1, /* size (0 = byte, 1 = short, 2 = long) */
+ 16, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_PCR16", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_PCR20_EXT_SRC,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_PCR20_EXT_SRC",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_PCR20_EXT_DST,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_PCR20_EXT_DST",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_PCR20_EXT_ODST,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_PCR20_EXT_ODST",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_ABS20_EXT_SRC,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_ABS20_EXT_SRC",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_ABS20_EXT_DST,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_ABS20_EXT_DST",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_ABS20_EXT_ODST,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_ABS20_EXT_ODST",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_ABS20_ADR_SRC,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_ABS20_ADR_SRC",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_ABS20_ADR_DST,/* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_ABS20_ADR_DST",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_PCR16, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_PCR16", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_PCR20_CALL, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_PCR20_CALL",/* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430X_ABS16, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_ABS16", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430_ABS_HI16, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_ABS_HI16", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ HOWTO (R_MSP430_PREL31, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430_PREL31", /* name */
+ FALSE, /* partial_inplace */
+ 0, /* src_mask */
+ 0xffff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ EMPTY_HOWTO (R_MSP430_EHTYPE),
+
+ /* A 10 bit PC relative relocation. */
+ HOWTO (R_MSP430X_10_PCREL, /* type */
+ 1, /* rightshift */
+ 1, /* size (0 = byte, 1 = short, 2 = long) */
+ 10, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_10_PCREL", /* name */
+ FALSE, /* partial_inplace */
+ 0x3ff, /* src_mask */
+ 0x3ff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ /* A 10 bit PC relative relocation for complicated polymorphs. */
+ HOWTO (R_MSP430X_2X_PCREL, /* type */
+ 1, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 10, /* bitsize */
+ TRUE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_bitfield,/* complain_on_overflow */
+ bfd_elf_generic_reloc, /* special_function */
+ "R_MSP430X_2X_PCREL", /* name */
+ FALSE, /* partial_inplace */
+ 0x3ff, /* src_mask */
+ 0x3ff, /* dst_mask */
+ TRUE), /* pcrel_offset */
+
+ /* Together with a following reloc, allows for the difference
+ between two symbols to be the real addend of the second reloc. */
+ HOWTO (R_MSP430X_SYM_DIFF, /* type */
+ 0, /* rightshift */
+ 2, /* size (0 = byte, 1 = short, 2 = long) */
+ 32, /* bitsize */
+ FALSE, /* pc_relative */
+ 0, /* bitpos */
+ complain_overflow_dont,/* complain_on_overflow */
+ rl78_sym_diff_handler, /* special handler. */
+ "R_MSP430X_SYM_DIFF", /* name */
+ FALSE, /* partial_inplace */
+ 0xffffffff, /* src_mask */
+ 0xffffffff, /* dst_mask */
+ FALSE) /* pcrel_offset */
};
/* Map BFD reloc types to MSP430 ELF reloc types. */
};
static const struct msp430_reloc_map msp430_reloc_map[] =
- {
- {BFD_RELOC_NONE, R_MSP430_NONE},
- {BFD_RELOC_32, R_MSP430_32},
- {BFD_RELOC_MSP430_10_PCREL, R_MSP430_10_PCREL},
- {BFD_RELOC_16, R_MSP430_16_BYTE},
- {BFD_RELOC_MSP430_16_PCREL, R_MSP430_16_PCREL},
- {BFD_RELOC_MSP430_16, R_MSP430_16},
- {BFD_RELOC_MSP430_16_PCREL_BYTE, R_MSP430_16_PCREL_BYTE},
- {BFD_RELOC_MSP430_16_BYTE, R_MSP430_16_BYTE},
- {BFD_RELOC_MSP430_2X_PCREL, R_MSP430_2X_PCREL},
- {BFD_RELOC_MSP430_RL_PCREL, R_MSP430_RL_PCREL}
- };
+{
+ {BFD_RELOC_NONE, R_MSP430_NONE},
+ {BFD_RELOC_32, R_MSP430_32},
+ {BFD_RELOC_MSP430_10_PCREL, R_MSP430_10_PCREL},
+ {BFD_RELOC_16, R_MSP430_16_BYTE},
+ {BFD_RELOC_MSP430_16_PCREL, R_MSP430_16_PCREL},
+ {BFD_RELOC_MSP430_16, R_MSP430_16},
+ {BFD_RELOC_MSP430_16_PCREL_BYTE, R_MSP430_16_PCREL_BYTE},
+ {BFD_RELOC_MSP430_16_BYTE, R_MSP430_16_BYTE},
+ {BFD_RELOC_MSP430_2X_PCREL, R_MSP430_2X_PCREL},
+ {BFD_RELOC_MSP430_RL_PCREL, R_MSP430_RL_PCREL},
+ {BFD_RELOC_8, R_MSP430_8},
+ {BFD_RELOC_MSP430_SYM_DIFF, R_MSP430_SYM_DIFF}
+};
+
+static const struct msp430_reloc_map msp430x_reloc_map[] =
+{
+ {BFD_RELOC_NONE, R_MSP430_NONE},
+ {BFD_RELOC_32, R_MSP430_ABS32},
+ {BFD_RELOC_16, R_MSP430_ABS16},
+ {BFD_RELOC_8, R_MSP430_ABS8},
+ {BFD_RELOC_MSP430_ABS8, R_MSP430_ABS8},
+ {BFD_RELOC_MSP430X_PCR20_EXT_SRC, R_MSP430X_PCR20_EXT_SRC},
+ {BFD_RELOC_MSP430X_PCR20_EXT_DST, R_MSP430X_PCR20_EXT_DST},
+ {BFD_RELOC_MSP430X_PCR20_EXT_ODST, R_MSP430X_PCR20_EXT_ODST},
+ {BFD_RELOC_MSP430X_ABS20_EXT_SRC, R_MSP430X_ABS20_EXT_SRC},
+ {BFD_RELOC_MSP430X_ABS20_EXT_DST, R_MSP430X_ABS20_EXT_DST},
+ {BFD_RELOC_MSP430X_ABS20_EXT_ODST, R_MSP430X_ABS20_EXT_ODST},
+ {BFD_RELOC_MSP430X_ABS20_ADR_SRC, R_MSP430X_ABS20_ADR_SRC},
+ {BFD_RELOC_MSP430X_ABS20_ADR_DST, R_MSP430X_ABS20_ADR_DST},
+ {BFD_RELOC_MSP430X_PCR16, R_MSP430X_PCR16},
+ {BFD_RELOC_MSP430X_PCR20_CALL, R_MSP430X_PCR20_CALL},
+ {BFD_RELOC_MSP430X_ABS16, R_MSP430X_ABS16},
+ {BFD_RELOC_MSP430_ABS_HI16, R_MSP430_ABS_HI16},
+ {BFD_RELOC_MSP430_PREL31, R_MSP430_PREL31},
+ {BFD_RELOC_MSP430_10_PCREL, R_MSP430X_10_PCREL},
+ {BFD_RELOC_MSP430_2X_PCREL, R_MSP430X_2X_PCREL},
+ {BFD_RELOC_MSP430_RL_PCREL, R_MSP430X_PCR16},
+ {BFD_RELOC_MSP430_SYM_DIFF, R_MSP430X_SYM_DIFF}
+};
+
+static inline bfd_boolean
+uses_msp430x_relocs (bfd * abfd)
+{
+ extern const bfd_target msp430_elf32_ti_vec;
+
+ return bfd_get_mach (abfd) == bfd_mach_msp430x
+ || abfd->xvec == & msp430_elf32_ti_vec;
+}
static reloc_howto_type *
bfd_elf32_bfd_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
{
unsigned int i;
- for (i = 0; i < ARRAY_SIZE (msp430_reloc_map); i++)
- if (msp430_reloc_map[i].bfd_reloc_val == code)
- return &elf_msp430_howto_table[msp430_reloc_map[i].elf_reloc_val];
+ if (uses_msp430x_relocs (abfd))
+ {
+ for (i = ARRAY_SIZE (msp430x_reloc_map); i--;)
+ if (msp430x_reloc_map[i].bfd_reloc_val == code)
+ return elf_msp430x_howto_table + msp430x_reloc_map[i].elf_reloc_val;
+ }
+ else
+ {
+ for (i = 0; i < ARRAY_SIZE (msp430_reloc_map); i++)
+ if (msp430_reloc_map[i].bfd_reloc_val == code)
+ return &elf_msp430_howto_table[msp430_reloc_map[i].elf_reloc_val];
+ }
return NULL;
}
{
unsigned int i;
- for (i = 0;
- i < (sizeof (elf_msp430_howto_table)
- / sizeof (elf_msp430_howto_table[0]));
- i++)
- if (elf_msp430_howto_table[i].name != NULL
- && strcasecmp (elf_msp430_howto_table[i].name, r_name) == 0)
- return &elf_msp430_howto_table[i];
+ if (uses_msp430x_relocs (abfd))
+ {
+ for (i = ARRAY_SIZE (elf_msp430x_howto_table); i--;)
+ if (elf_msp430x_howto_table[i].name != NULL
+ && strcasecmp (elf_msp430x_howto_table[i].name, r_name) == 0)
+ return elf_msp430x_howto_table + i;
+ }
+ else
+ {
+ for (i = 0;
+ i < (sizeof (elf_msp430_howto_table)
+ / sizeof (elf_msp430_howto_table[0]));
+ i++)
+ if (elf_msp430_howto_table[i].name != NULL
+ && strcasecmp (elf_msp430_howto_table[i].name, r_name) == 0)
+ return &elf_msp430_howto_table[i];
+ }
return NULL;
}
unsigned int r_type;
r_type = ELF32_R_TYPE (dst->r_info);
- BFD_ASSERT (r_type < (unsigned int) R_MSP430_max);
+
+ if (uses_msp430x_relocs (abfd))
+ {
+ if (r_type >= (unsigned int) R_MSP430x_max)
+ {
+ /* xgettext:c-format */
+ _bfd_error_handler (_("%B: invalid MSP430X reloc number: %d"), abfd, r_type);
+ r_type = 0;
+ }
+ cache_ptr->howto = elf_msp430x_howto_table + r_type;
+ return;
+ }
+
+ if (r_type >= (unsigned int) R_MSP430_max)
+ {
+ /* xgettext:c-format */
+ _bfd_error_handler (_("%B: invalid MSP430 reloc number: %d"), abfd, r_type);
+ r_type = 0;
+ }
cache_ptr->howto = &elf_msp430_howto_table[r_type];
}
const Elf_Internal_Rela *rel;
const Elf_Internal_Rela *rel_end;
- if (info->relocatable)
+ if (bfd_link_relocatable (info))
return TRUE;
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
while (h->root.type == bfd_link_hash_indirect
|| h->root.type == bfd_link_hash_warning)
h = (struct elf_link_hash_entry *) h->root.u.i.link;
+
+ /* PR15323, ref flags aren't set for references in the same
+ object. */
+ h->root.non_ir_ref = 1;
}
}
routines, but a few relocs, we have to do them ourselves. */
static bfd_reloc_status_type
-msp430_final_link_relocate (reloc_howto_type * howto, bfd * input_bfd,
- asection * input_section, bfd_byte * contents,
- Elf_Internal_Rela * rel, bfd_vma relocation)
+msp430_final_link_relocate (reloc_howto_type * howto,
+ bfd * input_bfd,
+ asection * input_section,
+ bfd_byte * contents,
+ Elf_Internal_Rela * rel,
+ bfd_vma relocation,
+ struct bfd_link_info * info)
{
+ static asection * sym_diff_section;
+ static bfd_vma sym_diff_value;
+
+ struct bfd_elf_section_data * esd = elf_section_data (input_section);
bfd_reloc_status_type r = bfd_reloc_ok;
bfd_vma x;
bfd_signed_vma srel;
+ bfd_boolean is_rel_reloc = FALSE;
+
+ if (uses_msp430x_relocs (input_bfd))
+ {
+ /* See if we have a REL type relocation. */
+ is_rel_reloc = (esd->rel.hdr != NULL);
+ /* Sanity check - only one type of relocation per section.
+ FIXME: Theoretically it is possible to have both types,
+ but if that happens how can we distinguish between the two ? */
+ BFD_ASSERT (! is_rel_reloc || ! esd->rela.hdr);
+ /* If we are using a REL relocation then the addend should be empty. */
+ BFD_ASSERT (! is_rel_reloc || rel->r_addend == 0);
+ }
- switch (howto->type)
+ if (sym_diff_section != NULL)
{
+ BFD_ASSERT (sym_diff_section == input_section);
+
+ if (uses_msp430x_relocs (input_bfd))
+ switch (howto->type)
+ {
+ case R_MSP430_ABS32:
+ /* If we are computing a 32-bit value for the location lists
+ and the result is 0 then we add one to the value. A zero
+ value can result because of linker relaxation deleteing
+ prologue instructions and using a value of 1 (for the begin
+ and end offsets in the location list entry) results in a
+ nul entry which does not prevent the following entries from
+ being parsed. */
+ if (relocation == sym_diff_value
+ && strcmp (input_section->name, ".debug_loc") == 0)
+ ++ relocation;
+ /* Fall through. */
+ case R_MSP430_ABS16:
+ case R_MSP430X_ABS16:
+ case R_MSP430_ABS8:
+ BFD_ASSERT (! is_rel_reloc);
+ relocation -= sym_diff_value;
+ break;
+
+ default:
+ return bfd_reloc_dangerous;
+ }
+ else
+ switch (howto->type)
+ {
+ case R_MSP430_32:
+ case R_MSP430_16:
+ case R_MSP430_16_BYTE:
+ case R_MSP430_8:
+ relocation -= sym_diff_value;
+ break;
+
+ default:
+ return bfd_reloc_dangerous;
+ }
+
+ sym_diff_section = NULL;
+ }
+
+ if (uses_msp430x_relocs (input_bfd))
+ switch (howto->type)
+ {
+ case R_MSP430X_SYM_DIFF:
+ /* Cache the input section and value.
+ The offset is unreliable, since relaxation may
+ have reduced the following reloc's offset. */
+ BFD_ASSERT (! is_rel_reloc);
+ sym_diff_section = input_section;
+ sym_diff_value = relocation;
+ return bfd_reloc_ok;
+
+ case R_MSP430_ABS16:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += bfd_get_16 (input_bfd, contents);
+ else
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, srel & 0xffff, contents);
+ break;
+
+ case R_MSP430X_10_PCREL:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += bfd_get_16 (input_bfd, contents) & 0x3ff;
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ srel -= 2; /* Branch instructions add 2 to the PC... */
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ if (srel & 1)
+ return bfd_reloc_outofrange;
+
+ /* MSP430 addresses commands as words. */
+ srel >>= 1;
+
+ /* Check for an overflow. */
+ if (srel < -512 || srel > 511)
+ {
+ if (info->disable_target_specific_optimizations < 0)
+ {
+ static bfd_boolean warned = FALSE;
+ if (! warned)
+ {
+ info->callbacks->warning
+ (info,
+ _("Try enabling relaxation to avoid relocation truncations"),
+ NULL, input_bfd, input_section, relocation);
+ warned = TRUE;
+ }
+ }
+ return bfd_reloc_overflow;
+ }
+
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfc00) | (srel & 0x3ff);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_PCR20_EXT_ODST:
+ /* [0,4]+[48,16] = ---F ---- ---- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
+ addend |= bfd_get_16 (input_bfd, contents + 6);
+ srel += addend;
+
+ }
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 6);
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfff0) | ((srel >> 16) & 0xf);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_ABS20_EXT_SRC:
+ /* [7,4]+[32,16] = -78- ---- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = (bfd_get_16 (input_bfd, contents) & 0x0780) << 9;
+ addend |= bfd_get_16 (input_bfd, contents + 4);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xf87f) | ((srel << 7) & 0x0780);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430_16_PCREL:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += bfd_get_16 (input_bfd, contents);
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ /* Only branch instructions add 2 to the PC... */
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ if (srel & 1)
+ return bfd_reloc_outofrange;
+ bfd_put_16 (input_bfd, srel & 0xffff, contents);
+ break;
+
+ case R_MSP430X_PCR20_EXT_DST:
+ /* [0,4]+[32,16] = ---F ---- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
+ addend |= bfd_get_16 (input_bfd, contents + 4);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfff0) | (srel & 0xf);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_PCR20_EXT_SRC:
+ /* [7,4]+[32,16] = -78- ---- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = ((bfd_get_16 (input_bfd, contents) & 0x0780) << 9);
+ addend |= bfd_get_16 (input_bfd, contents + 4);
+ srel += addend;;
+ }
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ /* Only branch instructions add 2 to the PC... */
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xf87f) | ((srel << 7) & 0x0780);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430_ABS8:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += bfd_get_8 (input_bfd, contents);
+ else
+ srel += rel->r_addend;
+ bfd_put_8 (input_bfd, srel & 0xff, contents);
+ break;
+
+ case R_MSP430X_ABS20_EXT_DST:
+ /* [0,4]+[32,16] = ---F ---- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
+ addend |= bfd_get_16 (input_bfd, contents + 4);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfff0) | (srel & 0xf);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_ABS20_EXT_ODST:
+ /* [0,4]+[48,16] = ---F ---- ---- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
+ addend |= bfd_get_16 (input_bfd, contents + 6);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 6);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfff0) | (srel & 0xf);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_ABS20_ADR_SRC:
+ /* [8,4]+[16,16] = -F-- FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+
+ addend = ((bfd_get_16 (input_bfd, contents) & 0xf00) << 8);
+ addend |= bfd_get_16 (input_bfd, contents + 2);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 2);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xf0ff) | ((srel << 8) & 0x0f00);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_ABS20_ADR_DST:
+ /* [0,4]+[16,16] = ---F FFFF */
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = ((bfd_get_16 (input_bfd, contents) & 0xf) << 16);
+ addend |= bfd_get_16 (input_bfd, contents + 2);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, (srel & 0xffff), contents + 2);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfff0) | (srel & 0xf);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_ABS16:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += bfd_get_16 (input_bfd, contents);
+ else
+ srel += rel->r_addend;
+ x = srel;
+ if (x > 0xffff)
+ return bfd_reloc_overflow;
+ bfd_put_16 (input_bfd, srel & 0xffff, contents);
+ break;
+
+ case R_MSP430_ABS_HI16:
+ /* The EABI specifies that this must be a RELA reloc. */
+ BFD_ASSERT (! is_rel_reloc);
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ srel += rel->r_addend;
+ bfd_put_16 (input_bfd, (srel >> 16) & 0xffff, contents);
+ break;
+
+ case R_MSP430X_PCR20_CALL:
+ /* [0,4]+[16,16] = ---F FFFF*/
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ {
+ bfd_vma addend;
+ addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
+ addend |= bfd_get_16 (input_bfd, contents + 2);
+ srel += addend;
+ }
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ bfd_put_16 (input_bfd, srel & 0xffff, contents + 2);
+ srel >>= 16;
+ x = bfd_get_16 (input_bfd, contents);
+ x = (x & 0xfff0) | (srel & 0xf);
+ bfd_put_16 (input_bfd, x, contents);
+ break;
+
+ case R_MSP430X_PCR16:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += bfd_get_16 (input_bfd, contents);
+ else
+ srel += rel->r_addend;
+ srel -= rel->r_offset;
+ srel -= (input_section->output_section->vma +
+ input_section->output_offset);
+ bfd_put_16 (input_bfd, srel & 0xffff, contents);
+ break;
+
+ case R_MSP430_PREL31:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ if (is_rel_reloc)
+ srel += (bfd_get_32 (input_bfd, contents) & 0x7fffffff);
+ else
+ srel += rel->r_addend;
+ srel += rel->r_addend;
+ x = bfd_get_32 (input_bfd, contents);
+ x = (x & 0x80000000) | ((srel >> 31) & 0x7fffffff);
+ bfd_put_32 (input_bfd, x, contents);
+ break;
+
+ default:
+ r = _bfd_final_link_relocate (howto, input_bfd, input_section,
+ contents, rel->r_offset,
+ relocation, rel->r_addend);
+ }
+ else
+ switch (howto->type)
+ {
case R_MSP430_10_PCREL:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
/* Check for an overflow. */
if (srel < -512 || srel > 511)
- return bfd_reloc_overflow;
+ {
+ if (info->disable_target_specific_optimizations < 0)
+ {
+ static bfd_boolean warned = FALSE;
+ if (! warned)
+ {
+ info->callbacks->warning
+ (info,
+ _("Try enabling relaxation to avoid relocation truncations"),
+ NULL, input_bfd, input_section, relocation);
+ warned = TRUE;
+ }
+ }
+ return bfd_reloc_overflow;
+ }
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfc00) | (srel & 0x3ff);
bfd_put_16 (input_bfd, x, contents - 2);
break;
- case R_MSP430_16_PCREL:
case R_MSP430_RL_PCREL:
+ case R_MSP430_16_PCREL:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
- default:
- r = _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset,
- relocation, rel->r_addend);
- }
+ case R_MSP430_8:
+ contents += rel->r_offset;
+ srel = (bfd_signed_vma) relocation;
+ srel += rel->r_addend;
+
+ bfd_put_8 (input_bfd, srel & 0xff, contents);
+ break;
+
+ case R_MSP430_SYM_DIFF:
+ /* Cache the input section and value.
+ The offset is unreliable, since relaxation may
+ have reduced the following reloc's offset. */
+ sym_diff_section = input_section;
+ sym_diff_value = relocation;
+ return bfd_reloc_ok;
+
+ default:
+ r = _bfd_final_link_relocate (howto, input_bfd, input_section,
+ contents, rel->r_offset,
+ relocation, rel->r_addend);
+ }
return r;
}
r_type = ELF32_R_TYPE (rel->r_info);
r_symndx = ELF32_R_SYM (rel->r_info);
- howto = elf_msp430_howto_table + ELF32_R_TYPE (rel->r_info);
+
+ if (uses_msp430x_relocs (input_bfd))
+ howto = elf_msp430x_howto_table + r_type;
+ else
+ howto = elf_msp430_howto_table + r_type;
+
h = NULL;
sym = NULL;
sec = NULL;
name = bfd_elf_string_from_elf_section
(input_bfd, symtab_hdr->sh_link, sym->st_name);
- name = (name == NULL) ? bfd_section_name (input_bfd, sec) : name;
+ name = (name == NULL || * name == 0) ? bfd_section_name (input_bfd, sec) : name;
}
else
{
- bfd_boolean unresolved_reloc, warned;
+ bfd_boolean unresolved_reloc, warned, ignored;
RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
r_symndx, symtab_hdr, sym_hashes,
h, sec, relocation,
- unresolved_reloc, warned);
+ unresolved_reloc, warned, ignored);
+ name = h->root.root.string;
}
- if (sec != NULL && elf_discarded_section (sec))
- {
- /* For relocs against symbols from removed linkonce sections,
- or sections discarded by a linker script, we just want the
- section contents zeroed. Avoid any special processing. */
- _bfd_clear_contents (howto, input_bfd, contents + rel->r_offset);
- rel->r_info = 0;
- rel->r_addend = 0;
- continue;
- }
+ if (sec != NULL && discarded_section (sec))
+ RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section,
+ rel, 1, relend, howto, 0, contents);
- if (info->relocatable)
+ if (bfd_link_relocatable (info))
continue;
r = msp430_final_link_relocate (howto, input_bfd, input_section,
- contents, rel, relocation);
+ contents, rel, relocation, info);
if (r != bfd_reloc_ok)
{
switch (r)
{
case bfd_reloc_overflow:
- r = info->callbacks->reloc_overflow
- (info, (h ? &h->root : NULL), name, howto->name,
- (bfd_vma) 0, input_bfd, input_section,
- rel->r_offset);
+ (*info->callbacks->reloc_overflow)
+ (info, (h ? &h->root : NULL), name, howto->name,
+ (bfd_vma) 0, input_bfd, input_section, rel->r_offset);
break;
case bfd_reloc_undefined:
- r = info->callbacks->undefined_symbol
- (info, name, input_bfd, input_section, rel->r_offset, TRUE);
+ (*info->callbacks->undefined_symbol)
+ (info, name, input_bfd, input_section, rel->r_offset, TRUE);
break;
case bfd_reloc_outofrange:
- msg = _("internal error: out of range error");
+ msg = _("internal error: branch/jump to an odd address detected");
break;
case bfd_reloc_notsupported:
}
if (msg)
- r = info->callbacks->warning
- (info, msg, name, input_bfd, input_section, rel->r_offset);
-
- if (!r)
- return FALSE;
+ (*info->callbacks->warning) (info, msg, name, input_bfd,
+ input_section, rel->r_offset);
}
}
switch (bfd_get_mach (abfd))
{
default:
- case bfd_mach_msp110:
- val = E_MSP430_MACH_MSP430x11x1;
- break;
-
- case bfd_mach_msp11:
- val = E_MSP430_MACH_MSP430x11;
- break;
-
- case bfd_mach_msp12:
- val = E_MSP430_MACH_MSP430x12;
- break;
-
- case bfd_mach_msp13:
- val = E_MSP430_MACH_MSP430x13;
- break;
-
- case bfd_mach_msp14:
- val = E_MSP430_MACH_MSP430x14;
- break;
-
- case bfd_mach_msp15:
- val = E_MSP430_MACH_MSP430x15;
- break;
-
- case bfd_mach_msp16:
- val = E_MSP430_MACH_MSP430x16;
- break;
-
- case bfd_mach_msp31:
- val = E_MSP430_MACH_MSP430x31;
- break;
-
- case bfd_mach_msp32:
- val = E_MSP430_MACH_MSP430x32;
- break;
-
- case bfd_mach_msp33:
- val = E_MSP430_MACH_MSP430x33;
- break;
-
- case bfd_mach_msp41:
- val = E_MSP430_MACH_MSP430x41;
- break;
-
- case bfd_mach_msp42:
- val = E_MSP430_MACH_MSP430x42;
- break;
-
- case bfd_mach_msp43:
- val = E_MSP430_MACH_MSP430x43;
- break;
-
- case bfd_mach_msp44:
- val = E_MSP430_MACH_MSP430x44;
- break;
+ case bfd_mach_msp110: val = E_MSP430_MACH_MSP430x11x1; break;
+ case bfd_mach_msp11: val = E_MSP430_MACH_MSP430x11; break;
+ case bfd_mach_msp12: val = E_MSP430_MACH_MSP430x12; break;
+ case bfd_mach_msp13: val = E_MSP430_MACH_MSP430x13; break;
+ case bfd_mach_msp14: val = E_MSP430_MACH_MSP430x14; break;
+ case bfd_mach_msp15: val = E_MSP430_MACH_MSP430x15; break;
+ case bfd_mach_msp16: val = E_MSP430_MACH_MSP430x16; break;
+ case bfd_mach_msp31: val = E_MSP430_MACH_MSP430x31; break;
+ case bfd_mach_msp32: val = E_MSP430_MACH_MSP430x32; break;
+ case bfd_mach_msp33: val = E_MSP430_MACH_MSP430x33; break;
+ case bfd_mach_msp41: val = E_MSP430_MACH_MSP430x41; break;
+ case bfd_mach_msp42: val = E_MSP430_MACH_MSP430x42; break;
+ case bfd_mach_msp43: val = E_MSP430_MACH_MSP430x43; break;
+ case bfd_mach_msp44: val = E_MSP430_MACH_MSP430x44; break;
+ case bfd_mach_msp20: val = E_MSP430_MACH_MSP430x20; break;
+ case bfd_mach_msp22: val = E_MSP430_MACH_MSP430x22; break;
+ case bfd_mach_msp23: val = E_MSP430_MACH_MSP430x23; break;
+ case bfd_mach_msp24: val = E_MSP430_MACH_MSP430x24; break;
+ case bfd_mach_msp26: val = E_MSP430_MACH_MSP430x26; break;
+ case bfd_mach_msp46: val = E_MSP430_MACH_MSP430x46; break;
+ case bfd_mach_msp47: val = E_MSP430_MACH_MSP430x47; break;
+ case bfd_mach_msp54: val = E_MSP430_MACH_MSP430x54; break;
+ case bfd_mach_msp430x: val = E_MSP430_MACH_MSP430X; break;
}
elf_elfheader (abfd)->e_machine = EM_MSP430;
switch (e_mach)
{
default:
- case E_MSP430_MACH_MSP430x11:
- e_set = bfd_mach_msp11;
- break;
-
- case E_MSP430_MACH_MSP430x11x1:
- e_set = bfd_mach_msp110;
- break;
-
- case E_MSP430_MACH_MSP430x12:
- e_set = bfd_mach_msp12;
- break;
-
- case E_MSP430_MACH_MSP430x13:
- e_set = bfd_mach_msp13;
- break;
-
- case E_MSP430_MACH_MSP430x14:
- e_set = bfd_mach_msp14;
- break;
-
- case E_MSP430_MACH_MSP430x15:
- e_set = bfd_mach_msp15;
- break;
-
- case E_MSP430_MACH_MSP430x16:
- e_set = bfd_mach_msp16;
- break;
-
- case E_MSP430_MACH_MSP430x31:
- e_set = bfd_mach_msp31;
- break;
-
- case E_MSP430_MACH_MSP430x32:
- e_set = bfd_mach_msp32;
- break;
-
- case E_MSP430_MACH_MSP430x33:
- e_set = bfd_mach_msp33;
- break;
-
- case E_MSP430_MACH_MSP430x41:
- e_set = bfd_mach_msp41;
- break;
-
- case E_MSP430_MACH_MSP430x42:
- e_set = bfd_mach_msp42;
- break;
-
- case E_MSP430_MACH_MSP430x43:
- e_set = bfd_mach_msp43;
- break;
-
- case E_MSP430_MACH_MSP430x44:
- e_set = bfd_mach_msp44;
- break;
+ case E_MSP430_MACH_MSP430x11: e_set = bfd_mach_msp11; break;
+ case E_MSP430_MACH_MSP430x11x1: e_set = bfd_mach_msp110; break;
+ case E_MSP430_MACH_MSP430x12: e_set = bfd_mach_msp12; break;
+ case E_MSP430_MACH_MSP430x13: e_set = bfd_mach_msp13; break;
+ case E_MSP430_MACH_MSP430x14: e_set = bfd_mach_msp14; break;
+ case E_MSP430_MACH_MSP430x15: e_set = bfd_mach_msp15; break;
+ case E_MSP430_MACH_MSP430x16: e_set = bfd_mach_msp16; break;
+ case E_MSP430_MACH_MSP430x31: e_set = bfd_mach_msp31; break;
+ case E_MSP430_MACH_MSP430x32: e_set = bfd_mach_msp32; break;
+ case E_MSP430_MACH_MSP430x33: e_set = bfd_mach_msp33; break;
+ case E_MSP430_MACH_MSP430x41: e_set = bfd_mach_msp41; break;
+ case E_MSP430_MACH_MSP430x42: e_set = bfd_mach_msp42; break;
+ case E_MSP430_MACH_MSP430x43: e_set = bfd_mach_msp43; break;
+ case E_MSP430_MACH_MSP430x44: e_set = bfd_mach_msp44; break;
+ case E_MSP430_MACH_MSP430x20: e_set = bfd_mach_msp20; break;
+ case E_MSP430_MACH_MSP430x22: e_set = bfd_mach_msp22; break;
+ case E_MSP430_MACH_MSP430x23: e_set = bfd_mach_msp23; break;
+ case E_MSP430_MACH_MSP430x24: e_set = bfd_mach_msp24; break;
+ case E_MSP430_MACH_MSP430x26: e_set = bfd_mach_msp26; break;
+ case E_MSP430_MACH_MSP430x46: e_set = bfd_mach_msp46; break;
+ case E_MSP430_MACH_MSP430x47: e_set = bfd_mach_msp47; break;
+ case E_MSP430_MACH_MSP430x54: e_set = bfd_mach_msp54; break;
+ case E_MSP430_MACH_MSP430X: e_set = bfd_mach_msp430x; break;
}
}
Relaxation required only in two cases:
- Bad hand coding like jumps from one section to another or
from file to file.
- - Sibling calls. This will affect onlu 'jump label' polymorph. Without
+ - Sibling calls. This will affect only 'jump label' polymorph. Without
relaxing this enlarges code by 2 bytes. Sibcalls implemented but
do not work in gcc's port by the reason I do not know.
+ - To convert out of range conditional jump instructions (found inside
+ a function) into inverted jumps over an unconditional branch instruction.
Anyway, if a relaxation required, user should pass -relax option to the
linker.
return FALSE;
}
-/* Adjust all local symbols defined as '.section + 0xXXXX' (.section has sec_shndx)
- referenced from current and other sections */
+/* Adjust all local symbols defined as '.section + 0xXXXX' (.section has
+ sec_shndx) referenced from current and other sections. */
+
static bfd_boolean
-msp430_elf_relax_adjust_locals(bfd * abfd, asection * sec, bfd_vma addr,
- int count, unsigned int sec_shndx, bfd_vma toaddr)
+msp430_elf_relax_adjust_locals (bfd * abfd, asection * sec, bfd_vma addr,
+ int count, unsigned int sec_shndx,
+ bfd_vma toaddr)
{
Elf_Internal_Shdr *symtab_hdr;
Elf_Internal_Rela *irel;
Elf_Internal_Sym *isym;
irel = elf_section_data (sec)->relocs;
+ if (irel == NULL)
+ return TRUE;
+
irelend = irel + sec->reloc_count;
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
-
- for (irel = elf_section_data (sec)->relocs; irel < irelend; irel++)
+
+ for (;irel < irelend; irel++)
{
- int sidx = ELF32_R_SYM(irel->r_info);
+ unsigned int sidx = ELF32_R_SYM(irel->r_info);
Elf_Internal_Sym *lsym = isym + sidx;
-
- /* Adjust symbols referenced by .sec+0xXX */
- if (irel->r_addend > addr && irel->r_addend < toaddr
+
+ /* Adjust symbols referenced by .sec+0xXX. */
+ if (irel->r_addend > addr && irel->r_addend < toaddr
+ && sidx < symtab_hdr->sh_info
&& lsym->st_shndx == sec_shndx)
irel->r_addend -= count;
}
-
+
return TRUE;
}
bfd_byte *contents;
Elf_Internal_Rela *irel;
Elf_Internal_Rela *irelend;
- Elf_Internal_Rela *irelalign;
bfd_vma toaddr;
Elf_Internal_Sym *isym;
Elf_Internal_Sym *isymend;
contents = elf_section_data (sec)->this_hdr.contents;
- /* The deletion must stop at the next ALIGN reloc for an aligment
- power larger than the number of bytes we are deleting. */
-
- irelalign = NULL;
toaddr = sec->size;
irel = elf_section_data (sec)->relocs;
/* Adjust all the relocs. */
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
- for (irel = elf_section_data (sec)->relocs; irel < irelend; irel++)
+ for (; irel < irelend; irel++)
{
/* Get the new reloc address. */
if ((irel->r_offset > addr && irel->r_offset < toaddr))
}
for (p = abfd->sections; p != NULL; p = p->next)
- msp430_elf_relax_adjust_locals(abfd,p,addr,count,sec_shndx,toaddr);
-
+ msp430_elf_relax_adjust_locals (abfd,p,addr,count,sec_shndx,toaddr);
+
/* Adjust the local symbols defined in this section. */
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
for (isymend = isym + symtab_hdr->sh_info; isym < isymend; isym++)
- if (isym->st_shndx == sec_shndx
- && isym->st_value > addr && isym->st_value < toaddr)
- isym->st_value -= count;
+ {
+ const char * name;
+
+ name = bfd_elf_string_from_elf_section
+ (abfd, symtab_hdr->sh_link, isym->st_name);
+ name = (name == NULL || * name == 0) ? bfd_section_name (abfd, sec) : name;
+
+ if (isym->st_shndx != sec_shndx)
+ continue;
+
+ if (isym->st_value > addr
+ && (isym->st_value < toaddr
+ /* We also adjust a symbol at the end of the section if its name is
+ on the list below. These symbols are used for debug info
+ generation and they refer to the end of the current section, not
+ the start of the next section. */
+ || (isym->st_value == toaddr
+ && name != NULL
+ && (CONST_STRNEQ (name, ".Letext")
+ || CONST_STRNEQ (name, ".LFE")))))
+ {
+ if (isym->st_value < addr + count)
+ isym->st_value = addr;
+ else
+ isym->st_value -= count;
+ }
+ /* Adjust the function symbol's size as well. */
+ else if (ELF_ST_TYPE (isym->st_info) == STT_FUNC
+ && isym->st_value + isym->st_size > addr
+ && isym->st_value + isym->st_size < toaddr)
+ isym->st_size -= count;
+ }
/* Now adjust the global symbols defined in this section. */
symcount = (symtab_hdr->sh_size / sizeof (Elf32_External_Sym)
&& sym_hash->root.u.def.section == sec
&& sym_hash->root.u.def.value > addr
&& sym_hash->root.u.def.value < toaddr)
- sym_hash->root.u.def.value -= count;
+ {
+ if (sym_hash->root.u.def.value < addr + count)
+ sym_hash->root.u.def.value = addr;
+ else
+ sym_hash->root.u.def.value -= count;
+ }
+ /* Adjust the function symbol's size as well. */
+ else if (sym_hash->root.type == bfd_link_hash_defined
+ && sym_hash->root.u.def.section == sec
+ && sym_hash->type == STT_FUNC
+ && sym_hash->root.u.def.value + sym_hash->size > addr
+ && sym_hash->root.u.def.value + sym_hash->size < toaddr)
+ sym_hash->size -= count;
}
return TRUE;
}
+/* Insert two words into a section whilst relaxing. */
+
+static bfd_byte *
+msp430_elf_relax_add_two_words (bfd * abfd, asection * sec, bfd_vma addr,
+ int word1, int word2)
+{
+ Elf_Internal_Shdr *symtab_hdr;
+ unsigned int sec_shndx;
+ bfd_byte *contents;
+ Elf_Internal_Rela *irel;
+ Elf_Internal_Rela *irelend;
+ Elf_Internal_Sym *isym;
+ Elf_Internal_Sym *isymend;
+ struct elf_link_hash_entry **sym_hashes;
+ struct elf_link_hash_entry **end_hashes;
+ unsigned int symcount;
+ bfd_vma sec_end;
+ asection *p;
+
+ contents = elf_section_data (sec)->this_hdr.contents;
+ sec_end = sec->size;
+
+ /* Make space for the new words. */
+ contents = bfd_realloc (contents, sec_end + 4);
+ memmove (contents + addr + 4, contents + addr, sec_end - addr);
+
+ /* Insert the new words. */
+ bfd_put_16 (abfd, word1, contents + addr);
+ bfd_put_16 (abfd, word2, contents + addr + 2);
+
+ /* Update the section information. */
+ sec->size += 4;
+ elf_section_data (sec)->this_hdr.contents = contents;
+
+ /* Adjust all the relocs. */
+ irel = elf_section_data (sec)->relocs;
+ irelend = irel + sec->reloc_count;
+
+ for (; irel < irelend; irel++)
+ if ((irel->r_offset >= addr && irel->r_offset < sec_end))
+ irel->r_offset += 4;
+
+ /* Adjust the local symbols defined in this section. */
+ sec_shndx = _bfd_elf_section_from_bfd_section (abfd, sec);
+ for (p = abfd->sections; p != NULL; p = p->next)
+ msp430_elf_relax_adjust_locals (abfd, p, addr, -4,
+ sec_shndx, sec_end);
+
+ /* Adjust the global symbols affected by the move. */
+ symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
+ isym = (Elf_Internal_Sym *) symtab_hdr->contents;
+ for (isymend = isym + symtab_hdr->sh_info; isym < isymend; isym++)
+ if (isym->st_shndx == sec_shndx
+ && isym->st_value >= addr && isym->st_value < sec_end)
+ isym->st_value += 4;
+
+ /* Now adjust the global symbols defined in this section. */
+ symcount = (symtab_hdr->sh_size / sizeof (Elf32_External_Sym)
+ - symtab_hdr->sh_info);
+ sym_hashes = elf_sym_hashes (abfd);
+ end_hashes = sym_hashes + symcount;
+ for (; sym_hashes < end_hashes; sym_hashes++)
+ {
+ struct elf_link_hash_entry *sym_hash = *sym_hashes;
+
+ if ((sym_hash->root.type == bfd_link_hash_defined
+ || sym_hash->root.type == bfd_link_hash_defweak)
+ && sym_hash->root.u.def.section == sec
+ && sym_hash->root.u.def.value >= addr
+ && sym_hash->root.u.def.value < sec_end)
+ sym_hash->root.u.def.value += 4;
+ }
+
+ return contents;
+}
static bfd_boolean
msp430_elf_relax_section (bfd * abfd, asection * sec,
/* We don't have to do anything for a relocatable link, if
this section does not have relocs, or if this is not a
code section. */
- if (link_info->relocatable
- || (sec->flags & SEC_RELOC) == 0
- || sec->reloc_count == 0 || (sec->flags & SEC_CODE) == 0)
+ if (bfd_link_relocatable (link_info)
+ || (sec->flags & SEC_RELOC) == 0
+ || sec->reloc_count == 0 || (sec->flags & SEC_CODE) == 0)
return TRUE;
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
/* Walk through them looking for relaxing opportunities. */
irelend = internal_relocs + sec->reloc_count;
+
+ /* Do code size growing relocs first. */
for (irel = internal_relocs; irel < irelend; irel++)
{
bfd_vma symval;
/* If this isn't something that can be relaxed, then ignore
this reloc. */
- if (ELF32_R_TYPE (irel->r_info) != (int) R_MSP430_RL_PCREL)
+ if (uses_msp430x_relocs (abfd)
+ && ELF32_R_TYPE (irel->r_info) == (int) R_MSP430X_10_PCREL)
+ ;
+ else if (! uses_msp430x_relocs (abfd)
+ && ELF32_R_TYPE (irel->r_info) == (int) R_MSP430_10_PCREL)
+ ;
+ else
continue;
/* Get the section contents if we haven't done so already. */
that would be more work, but would require less memory when
the linker is run. */
- /* Try to turn a 16bit pc-relative branch into a 10bit pc-relative
- branch. */
- /* Paranoia? paranoia... */
- if (ELF32_R_TYPE (irel->r_info) == (int) R_MSP430_RL_PCREL)
- {
- bfd_vma value = symval;
+ bfd_signed_vma value = symval;
+ int opcode;
- /* Deal with pc-relative gunk. */
- value -= (sec->output_section->vma + sec->output_offset);
- value -= irel->r_offset;
- value += irel->r_addend;
+ /* Compute the value that will be relocated. */
+ value += irel->r_addend;
+ /* Convert to PC relative. */
+ value -= (sec->output_section->vma + sec->output_offset);
+ value -= irel->r_offset;
+ value -= 2;
+ /* Scale. */
+ value >>= 1;
- /* See if the value will fit in 10 bits, note the high value is
- 1016 as the target will be two bytes closer if we are
- able to relax. */
- if ((long) value < 1016 && (long) value > -1016)
- {
- int code0 = 0, code1 = 0, code2 = 0;
- int i;
- struct rcodes_s *rx;
+ /* If it is in range then no modifications are needed. */
+ if (value >= -512 && value <= 511)
+ continue;
- /* Get the opcode. */
- if (irel->r_offset >= 6)
- code0 = bfd_get_16 (abfd, contents + irel->r_offset - 6);
+ /* Get the opcode. */
+ opcode = bfd_get_16 (abfd, contents + irel->r_offset);
- if (irel->r_offset >= 4)
- code1 = bfd_get_16 (abfd, contents + irel->r_offset - 4);
+ /* Compute the new opcode. We are going to convert:
+ J<cond> label
+ into:
+ J<inv-cond> 1f
+ BR[A] #label
+ 1: */
+ switch (opcode & 0xfc00)
+ {
+ case 0x3800: opcode = 0x3402; break; /* Jl -> Jge +2 */
+ case 0x3400: opcode = 0x3802; break; /* Jge -> Jl +2 */
+ case 0x2c00: opcode = 0x2802; break; /* Jhs -> Jlo +2 */
+ case 0x2800: opcode = 0x2c02; break; /* Jlo -> Jhs +2 */
+ case 0x2400: opcode = 0x2002; break; /* Jeq -> Jne +2 */
+ case 0x2000: opcode = 0x2402; break; /* jne -> Jeq +2 */
+ case 0x3000: /* jn */
+ /* There is no direct inverse of the Jn insn.
+ FIXME: we could do this as:
+ Jn 1f
+ br 2f
+ 1: br label
+ 2: */
+ continue;
+ default:
+ /* Not a conditional branch instruction. */
+ /* fprintf (stderr, "unrecog: %x\n", opcode); */
+ continue;
+ }
- code2 = bfd_get_16 (abfd, contents + irel->r_offset - 2);
+ /* Note that we've changed the relocs, section contents, etc. */
+ elf_section_data (sec)->relocs = internal_relocs;
+ elf_section_data (sec)->this_hdr.contents = contents;
+ symtab_hdr->contents = (unsigned char *) isymbuf;
- if (code2 != 0x4010)
- continue;
+ /* Install the new opcode. */
+ bfd_put_16 (abfd, opcode, contents + irel->r_offset);
- /* Check r4 and r3. */
- for (i = NUMB_RELAX_CODES - 1; i >= 0; i--)
- {
- rx = &rcode[i];
- if (rx->cdx == 2 && rx->f0 == code0 && rx->f1 == code1)
- break;
- else if (rx->cdx == 1 && rx->f1 == code1)
- break;
- else if (rx->cdx == 0) /* This is an unconditional jump. */
- break;
- }
+ /* Insert the new branch instruction. */
+ if (uses_msp430x_relocs (abfd))
+ {
+ /* Insert an absolute branch (aka MOVA) instruction. */
+ contents = msp430_elf_relax_add_two_words
+ (abfd, sec, irel->r_offset + 2, 0x0080, 0x0000);
+
+ /* Update the relocation to point to the inserted branch
+ instruction. Note - we are changing a PC-relative reloc
+ into an absolute reloc, but this is OK because we have
+ arranged with the assembler to have the reloc's value be
+ a (local) symbol, not a section+offset value. */
+ irel->r_offset += 2;
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430X_ABS20_ADR_SRC);
+ }
+ else
+ {
+ contents = msp430_elf_relax_add_two_words
+ (abfd, sec, irel->r_offset + 2, 0x4030, 0x0000);
+
+ /* See comment above about converting a 10-bit PC-rel
+ relocation into a 16-bit absolute relocation. */
+ irel->r_offset += 4;
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430_16);
+ }
- /* Check labels:
+ /* Growing the section may mean that other
+ conditional branches need to be fixed. */
+ *again = TRUE;
+ }
+
+ for (irel = internal_relocs; irel < irelend; irel++)
+ {
+ bfd_vma symval;
+
+ /* Get the section contents if we haven't done so already. */
+ if (contents == NULL)
+ {
+ /* Get cached copy if it exists. */
+ if (elf_section_data (sec)->this_hdr.contents != NULL)
+ contents = elf_section_data (sec)->this_hdr.contents;
+ else if (! bfd_malloc_and_get_section (abfd, sec, &contents))
+ goto error_return;
+ }
+
+ /* Read this BFD's local symbols if we haven't done so already. */
+ if (isymbuf == NULL && symtab_hdr->sh_info != 0)
+ {
+ isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents;
+ if (isymbuf == NULL)
+ isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr,
+ symtab_hdr->sh_info, 0,
+ NULL, NULL, NULL);
+ if (isymbuf == NULL)
+ goto error_return;
+ }
+
+ /* Get the value of the symbol referred to by the reloc. */
+ if (ELF32_R_SYM (irel->r_info) < symtab_hdr->sh_info)
+ {
+ /* A local symbol. */
+ Elf_Internal_Sym *isym;
+ asection *sym_sec;
+
+ isym = isymbuf + ELF32_R_SYM (irel->r_info);
+ if (isym->st_shndx == SHN_UNDEF)
+ sym_sec = bfd_und_section_ptr;
+ else if (isym->st_shndx == SHN_ABS)
+ sym_sec = bfd_abs_section_ptr;
+ else if (isym->st_shndx == SHN_COMMON)
+ sym_sec = bfd_com_section_ptr;
+ else
+ sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx);
+ symval = (isym->st_value
+ + sym_sec->output_section->vma + sym_sec->output_offset);
+ }
+ else
+ {
+ unsigned long indx;
+ struct elf_link_hash_entry *h;
+
+ /* An external symbol. */
+ indx = ELF32_R_SYM (irel->r_info) - symtab_hdr->sh_info;
+ h = elf_sym_hashes (abfd)[indx];
+ BFD_ASSERT (h != NULL);
+
+ if (h->root.type != bfd_link_hash_defined
+ && h->root.type != bfd_link_hash_defweak)
+ /* This appears to be a reference to an undefined
+ symbol. Just ignore it--it will be caught by the
+ regular reloc processing. */
+ continue;
+
+ symval = (h->root.u.def.value
+ + h->root.u.def.section->output_section->vma
+ + h->root.u.def.section->output_offset);
+ }
+
+ /* For simplicity of coding, we are going to modify the section
+ contents, the section relocs, and the BFD symbol table. We
+ must tell the rest of the code not to free up this
+ information. It would be possible to instead create a table
+ of changes which have to be made, as is done in coff-mips.c;
+ that would be more work, but would require less memory when
+ the linker is run. */
+
+ /* Try to turn a 16bit pc-relative branch into a 10bit pc-relative
+ branch. */
+ /* Paranoia? paranoia... */
+ if (! uses_msp430x_relocs (abfd)
+ && ELF32_R_TYPE (irel->r_info) == (int) R_MSP430_RL_PCREL)
+ {
+ bfd_vma value = symval;
+
+ /* Deal with pc-relative gunk. */
+ value -= (sec->output_section->vma + sec->output_offset);
+ value -= irel->r_offset;
+ value += irel->r_addend;
+
+ /* See if the value will fit in 10 bits, note the high value is
+ 1016 as the target will be two bytes closer if we are
+ able to relax. */
+ if ((long) value < 1016 && (long) value > -1016)
+ {
+ int code0 = 0, code1 = 0, code2 = 0;
+ int i;
+ struct rcodes_s *rx;
+
+ /* Get the opcode. */
+ if (irel->r_offset >= 6)
+ code0 = bfd_get_16 (abfd, contents + irel->r_offset - 6);
+
+ if (irel->r_offset >= 4)
+ code1 = bfd_get_16 (abfd, contents + irel->r_offset - 4);
+
+ code2 = bfd_get_16 (abfd, contents + irel->r_offset - 2);
+
+ if (code2 != 0x4010)
+ continue;
+
+ /* Check r4 and r3. */
+ for (i = NUMB_RELAX_CODES - 1; i >= 0; i--)
+ {
+ rx = &rcode[i];
+ if (rx->cdx == 2 && rx->f0 == code0 && rx->f1 == code1)
+ break;
+ else if (rx->cdx == 1 && rx->f1 == code1)
+ break;
+ else if (rx->cdx == 0) /* This is an unconditional jump. */
+ break;
+ }
+
+ /* Check labels:
.Label0: ; we do not care about this label
- jeq +6
+ jeq +6
.Label1: ; make sure there is no label here
- jl +4
+ jl +4
.Label2: ; make sure there is no label here
- br .Label_dst
-
- So, if there is .Label1 or .Label2 we cannot relax this code.
- This actually should not happen, cause for relaxable
- instructions we use RL_PCREL reloc instead of 16_PCREL.
- Will change this in the future. */
-
- if (rx->cdx > 0
- && msp430_elf_symbol_address_p (abfd, sec, isymbuf,
- irel->r_offset - 2))
- continue;
- if (rx->cdx > 1
- && msp430_elf_symbol_address_p (abfd, sec, isymbuf,
- irel->r_offset - 4))
- continue;
-
- /* Note that we've changed the relocs, section contents, etc. */
- elf_section_data (sec)->relocs = internal_relocs;
- elf_section_data (sec)->this_hdr.contents = contents;
- symtab_hdr->contents = (unsigned char *) isymbuf;
-
- /* Fix the relocation's type. */
- if (rx->labels == 3) /* Handle special cases. */
- irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
- R_MSP430_2X_PCREL);
- else
- irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
- R_MSP430_10_PCREL);
-
- /* Fix the opcode right way. */
- bfd_put_16 (abfd, rx->t0, contents + irel->r_offset - rx->off);
- if (rx->t1)
- bfd_put_16 (abfd, rx->t1,
- contents + irel->r_offset - rx->off + 2);
-
- /* Delete bytes. */
- if (!msp430_elf_relax_delete_bytes (abfd, sec,
- irel->r_offset - rx->off +
- rx->ncl, rx->bs))
- goto error_return;
-
- /* Handle unconditional jumps. */
- if (rx->cdx == 0)
+ br .Label_dst
+
+ So, if there is .Label1 or .Label2 we cannot relax this code.
+ This actually should not happen, cause for relaxable
+ instructions we use RL_PCREL reloc instead of 16_PCREL.
+ Will change this in the future. */
+
+ if (rx->cdx > 0
+ && msp430_elf_symbol_address_p (abfd, sec, isymbuf,
+ irel->r_offset - 2))
+ continue;
+ if (rx->cdx > 1
+ && msp430_elf_symbol_address_p (abfd, sec, isymbuf,
+ irel->r_offset - 4))
+ continue;
+
+ /* Note that we've changed the relocs, section contents, etc. */
+ elf_section_data (sec)->relocs = internal_relocs;
+ elf_section_data (sec)->this_hdr.contents = contents;
+ symtab_hdr->contents = (unsigned char *) isymbuf;
+
+ /* Fix the relocation's type. */
+ if (uses_msp430x_relocs (abfd))
+ {
+ if (rx->labels == 3) /* Handle special cases. */
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430X_2X_PCREL);
+ else
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430X_10_PCREL);
+ }
+ else
+ {
+ if (rx->labels == 3) /* Handle special cases. */
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430_2X_PCREL);
+ else
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430_10_PCREL);
+ }
+
+ /* Fix the opcode right way. */
+ bfd_put_16 (abfd, rx->t0, contents + irel->r_offset - rx->off);
+ if (rx->t1)
+ bfd_put_16 (abfd, rx->t1,
+ contents + irel->r_offset - rx->off + 2);
+
+ /* Delete bytes. */
+ if (!msp430_elf_relax_delete_bytes (abfd, sec,
+ irel->r_offset - rx->off +
+ rx->ncl, rx->bs))
+ goto error_return;
+
+ /* Handle unconditional jumps. */
+ if (rx->cdx == 0)
+ irel->r_offset -= 2;
+
+ /* That will change things, so, we should relax again.
+ Note that this is not required, and it may be slow. */
+ *again = TRUE;
+ }
+ }
+
+ /* Try to turn a 16-bit absolute branch into a 10-bit pc-relative
+ branch. */
+ if (uses_msp430x_relocs (abfd)
+ && ELF32_R_TYPE (irel->r_info) == R_MSP430X_ABS16)
+ {
+ bfd_vma value = symval;
+
+ value -= (sec->output_section->vma + sec->output_offset);
+ value -= irel->r_offset;
+ value += irel->r_addend;
+
+ /* See if the value will fit in 10 bits, note the high value is
+ 1016 as the target will be two bytes closer if we are
+ able to relax. */
+ if ((long) value < 1016 && (long) value > -1016)
+ {
+ int code2;
+
+ /* Get the opcode. */
+ code2 = bfd_get_16 (abfd, contents + irel->r_offset - 2);
+ if (code2 != 0x4030)
+ continue;
+ /* FIXME: check r4 and r3 ? */
+ /* FIXME: Handle 0x4010 as well ? */
+
+ /* Note that we've changed the relocs, section contents, etc. */
+ elf_section_data (sec)->relocs = internal_relocs;
+ elf_section_data (sec)->this_hdr.contents = contents;
+ symtab_hdr->contents = (unsigned char *) isymbuf;
+
+ /* Fix the relocation's type. */
+ if (uses_msp430x_relocs (abfd))
+ {
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430X_10_PCREL);
+ }
+ else
+ {
+ irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
+ R_MSP430_10_PCREL);
+ }
+
+ /* Fix the opcode right way. */
+ bfd_put_16 (abfd, 0x3c00, contents + irel->r_offset - 2);
irel->r_offset -= 2;
- /* That will change things, so, we should relax again.
- Note that this is not required, and it may be slow. */
- *again = TRUE;
- }
- }
- }
+ /* Delete bytes. */
+ if (!msp430_elf_relax_delete_bytes (abfd, sec,
+ irel->r_offset + 2, 2))
+ goto error_return;
+
+ /* That will change things, so, we should relax again.
+ Note that this is not required, and it may be slow. */
+ *again = TRUE;
+ }
+ }
+ }
if (isymbuf != NULL && symtab_hdr->contents != (unsigned char *) isymbuf)
{
return FALSE;
}
+/* Handle an MSP430 specific section when reading an object file.
+ This is called when bfd_section_from_shdr finds a section with
+ an unknown type. */
+
+static bfd_boolean
+elf32_msp430_section_from_shdr (bfd *abfd,
+ Elf_Internal_Shdr * hdr,
+ const char *name,
+ int shindex)
+{
+ switch (hdr->sh_type)
+ {
+ case SHT_MSP430_SEC_FLAGS:
+ case SHT_MSP430_SYM_ALIASES:
+ case SHT_MSP430_ATTRIBUTES:
+ return _bfd_elf_make_section_from_shdr (abfd, hdr, name, shindex);
+ default:
+ return FALSE;
+ }
+}
+
+static bfd_boolean
+elf32_msp430_obj_attrs_handle_unknown (bfd *abfd, int tag)
+{
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("Warning: %B: Unknown MSPABI object attribute %d"),
+ abfd, tag);
+ return TRUE;
+}
+
+/* Determine whether an object attribute tag takes an integer, a
+ string or both. */
+
+static int
+elf32_msp430_obj_attrs_arg_type (int tag)
+{
+ if (tag == Tag_compatibility)
+ return ATTR_TYPE_FLAG_INT_VAL | ATTR_TYPE_FLAG_STR_VAL;
+
+ if (tag < 32)
+ return ATTR_TYPE_FLAG_INT_VAL;
+
+ return (tag & 1) != 0 ? ATTR_TYPE_FLAG_STR_VAL : ATTR_TYPE_FLAG_INT_VAL;
+}
+
+static inline const char *
+isa_type (int isa)
+{
+ switch (isa)
+ {
+ case 1: return "MSP430";
+ case 2: return "MSP430X";
+ default: return "unknown";
+ }
+}
+
+static inline const char *
+code_model (int model)
+{
+ switch (model)
+ {
+ case 1: return "small";
+ case 2: return "large";
+ default: return "unknown";
+ }
+}
+
+static inline const char *
+data_model (int model)
+{
+ switch (model)
+ {
+ case 1: return "small";
+ case 2: return "large";
+ case 3: return "restricted large";
+ default: return "unknown";
+ }
+}
+
+/* Merge MSPABI object attributes from IBFD into OBFD.
+ Raise an error if there are conflicting attributes. */
+
+static bfd_boolean
+elf32_msp430_merge_mspabi_attributes (bfd *ibfd, struct bfd_link_info *info)
+{
+ bfd *obfd = info->output_bfd;
+ obj_attribute *in_attr;
+ obj_attribute *out_attr;
+ bfd_boolean result = TRUE;
+ static bfd * first_input_bfd = NULL;
+
+ /* Skip linker created files. */
+ if (ibfd->flags & BFD_LINKER_CREATED)
+ return TRUE;
+
+ /* If this is the first real object just copy the attributes. */
+ if (!elf_known_obj_attributes_proc (obfd)[0].i)
+ {
+ _bfd_elf_copy_obj_attributes (ibfd, obfd);
+
+ out_attr = elf_known_obj_attributes_proc (obfd);
+
+ /* Use the Tag_null value to indicate that
+ the attributes have been initialized. */
+ out_attr[0].i = 1;
+
+ first_input_bfd = ibfd;
+ return TRUE;
+ }
+
+ in_attr = elf_known_obj_attributes_proc (ibfd);
+ out_attr = elf_known_obj_attributes_proc (obfd);
+
+ /* The ISAs must be the same. */
+ if (in_attr[OFBA_MSPABI_Tag_ISA].i != out_attr[OFBA_MSPABI_Tag_ISA].i)
+ {
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("error: %B uses %s instructions but %B uses %s"),
+ ibfd, isa_type (in_attr[OFBA_MSPABI_Tag_ISA].i),
+ first_input_bfd, isa_type (out_attr[OFBA_MSPABI_Tag_ISA].i));
+ result = FALSE;
+ }
+
+ /* The code models must be the same. */
+ if (in_attr[OFBA_MSPABI_Tag_Code_Model].i !=
+ out_attr[OFBA_MSPABI_Tag_Code_Model].i)
+ {
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("error: %B uses the %s code model whereas %B uses the %s code model"),
+ ibfd, code_model (in_attr[OFBA_MSPABI_Tag_Code_Model].i),
+ first_input_bfd, code_model (out_attr[OFBA_MSPABI_Tag_Code_Model].i));
+ result = FALSE;
+ }
+
+ /* The large code model is only supported by the MSP430X. */
+ if (in_attr[OFBA_MSPABI_Tag_Code_Model].i == 2
+ && out_attr[OFBA_MSPABI_Tag_ISA].i != 2)
+ {
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("error: %B uses the large code model but %B uses MSP430 instructions"),
+ ibfd, first_input_bfd);
+ result = FALSE;
+ }
+
+ /* The data models must be the same. */
+ if (in_attr[OFBA_MSPABI_Tag_Data_Model].i !=
+ out_attr[OFBA_MSPABI_Tag_Data_Model].i)
+ {
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("error: %B uses the %s data model whereas %B uses the %s data model"),
+ ibfd, data_model (in_attr[OFBA_MSPABI_Tag_Data_Model].i),
+ first_input_bfd, data_model (out_attr[OFBA_MSPABI_Tag_Data_Model].i));
+ result = FALSE;
+ }
+
+ /* The small code model requires the use of the small data model. */
+ if (in_attr[OFBA_MSPABI_Tag_Code_Model].i == 1
+ && out_attr[OFBA_MSPABI_Tag_Data_Model].i != 1)
+ {
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("error: %B uses the small code model but %B uses the %s data model"),
+ ibfd, first_input_bfd,
+ data_model (out_attr[OFBA_MSPABI_Tag_Data_Model].i));
+ result = FALSE;
+ }
+
+ /* The large data models are only supported by the MSP430X. */
+ if (in_attr[OFBA_MSPABI_Tag_Data_Model].i > 1
+ && out_attr[OFBA_MSPABI_Tag_ISA].i != 2)
+ {
+ _bfd_error_handler
+ /* xgettext:c-format */
+ (_("error: %B uses the %s data model but %B only uses MSP430 instructions"),
+ ibfd, data_model (in_attr[OFBA_MSPABI_Tag_Data_Model].i),
+ first_input_bfd);
+ result = FALSE;
+ }
+
+ return result;
+}
+
+/* Merge backend specific data from an object file to the output
+ object file when linking. */
+
+static bfd_boolean
+elf32_msp430_merge_private_bfd_data (bfd *ibfd, struct bfd_link_info *info)
+{
+ bfd *obfd = info->output_bfd;
+ /* Make sure that the machine number reflects the most
+ advanced version of the MSP architecture required. */
+#define max(a,b) ((a) > (b) ? (a) : (b))
+ if (bfd_get_mach (ibfd) != bfd_get_mach (obfd))
+ bfd_default_set_arch_mach (obfd, bfd_get_arch (obfd),
+ max (bfd_get_mach (ibfd), bfd_get_mach (obfd)));
+#undef max
+
+ return elf32_msp430_merge_mspabi_attributes (ibfd, info);
+}
+
+static bfd_boolean
+msp430_elf_is_target_special_symbol (bfd *abfd, asymbol *sym)
+{
+ return _bfd_elf_is_local_label_name (abfd, sym->name);
+}
+
+static bfd_boolean
+uses_large_model (bfd *abfd)
+{
+ obj_attribute * attr;
+
+ if (abfd->flags & BFD_LINKER_CREATED)
+ return FALSE;
+
+ attr = elf_known_obj_attributes_proc (abfd);
+ if (attr == NULL)
+ return FALSE;
+
+ return attr[OFBA_MSPABI_Tag_Code_Model].i == 2;
+}
+
+static unsigned int
+elf32_msp430_eh_frame_address_size (bfd *abfd,
+ const asection *sec ATTRIBUTE_UNUSED)
+{
+ return uses_large_model (abfd) ? 4 : 2;
+}
+
+/* This is gross. The MSP430 EABI says that (sec 11.5):
+
+ "An implementation may choose to use Rel or Rela
+ type relocations for other relocations."
+
+ But it also says that:
+
+ "Certain relocations are identified as Rela only. [snip]
+ Where Rela is specified, an implementation must honor
+ this requirement."
+
+ There is one relocation marked as requiring RELA - R_MSP430_ABS_HI16 - but
+ to keep things simple we choose to use RELA relocations throughout. The
+ problem is that the TI compiler generates REL relocations, so we have to
+ be able to accept those as well. */
+
+#define elf_backend_may_use_rel_p 1
+#define elf_backend_may_use_rela_p 1
+#define elf_backend_default_use_rela_p 1
+
+#undef elf_backend_obj_attrs_vendor
+#define elf_backend_obj_attrs_vendor "mspabi"
+#undef elf_backend_obj_attrs_section
+#define elf_backend_obj_attrs_section ".MSP430.attributes"
+#undef elf_backend_obj_attrs_section_type
+#define elf_backend_obj_attrs_section_type SHT_MSP430_ATTRIBUTES
+#define elf_backend_section_from_shdr elf32_msp430_section_from_shdr
+#define elf_backend_obj_attrs_handle_unknown elf32_msp430_obj_attrs_handle_unknown
+#undef elf_backend_obj_attrs_arg_type
+#define elf_backend_obj_attrs_arg_type elf32_msp430_obj_attrs_arg_type
+#define bfd_elf32_bfd_merge_private_bfd_data elf32_msp430_merge_private_bfd_data
+#define elf_backend_eh_frame_address_size elf32_msp430_eh_frame_address_size
#define ELF_ARCH bfd_arch_msp430
#define ELF_MACHINE_CODE EM_MSP430
#define ELF_MACHINE_ALT1 EM_MSP430_OLD
-#define ELF_MAXPAGESIZE 1
+#define ELF_MAXPAGESIZE 4
#define ELF_OSABI ELFOSABI_STANDALONE
-#define TARGET_LITTLE_SYM bfd_elf32_msp430_vec
+#define TARGET_LITTLE_SYM msp430_elf32_vec
#define TARGET_LITTLE_NAME "elf32-msp430"
#define elf_info_to_howto msp430_info_to_howto_rela
#define elf_backend_can_gc_sections 1
#define elf_backend_final_write_processing bfd_elf_msp430_final_write_processing
#define elf_backend_object_p elf32_msp430_object_p
-#define elf_backend_post_process_headers _bfd_elf_set_osabi
#define bfd_elf32_bfd_relax_section msp430_elf_relax_section
+#define bfd_elf32_bfd_is_target_special_symbol msp430_elf_is_target_special_symbol
+
+#undef elf32_bed
+#define elf32_bed elf32_msp430_bed
+
+#include "elf32-target.h"
+
+/* The TI compiler sets the OSABI field to ELFOSABI_NONE. */
+#undef TARGET_LITTLE_SYM
+#define TARGET_LITTLE_SYM msp430_elf32_ti_vec
+
+#undef elf32_bed
+#define elf32_bed elf32_msp430_ti_bed
+
+#undef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+
+static const struct bfd_elf_special_section msp430_ti_elf_special_sections[] =
+{
+ /* prefix, prefix_length, suffix_len, type, attributes. */
+ { STRING_COMMA_LEN (".TI.symbol.alias"), 0, SHT_MSP430_SYM_ALIASES, 0 },
+ { STRING_COMMA_LEN (".TI.section.flags"), 0, SHT_MSP430_SEC_FLAGS, 0 },
+ { STRING_COMMA_LEN ("_TI_build_attrib"), 0, SHT_MSP430_ATTRIBUTES, 0 },
+ { NULL, 0, 0, 0, 0 }
+};
+
+#undef elf_backend_special_sections
+#define elf_backend_special_sections msp430_ti_elf_special_sections
#include "elf32-target.h"