/* 32-bit ELF support for Nios II.
- Copyright (C) 2012-2016 Free Software Foundation, Inc.
+ Copyright (C) 2012-2017 Free Software Foundation, Inc.
Contributed by Nigel Gray (ngray@altera.com).
Contributed by Mentor Graphics, Inc.
Elf_Internal_Sym **all_local_syms;
/* Short-cuts to get to dynamic linker sections. */
- asection *sdynbss;
- asection *srelbss;
asection *sbss;
/* GOT pointer symbol _gp_got. */
TRUE, FALSE);
if (hsh == NULL)
{
+ /* xgettext:c-format */
_bfd_error_handler (_("%B: cannot create stub entry %s"),
section->owner,
stub_name);
/* So far, the only incompatible flags denote incompatible
architectures. */
_bfd_error_handler
+ /* xgettext:c-format */
(_("error: %B: Conflicting CPU architectures %d/%d"),
ibfd, new_flags, old_flags);
bfd_set_error (bfd_error_bad_value);
{
if (h)
name = h->root.root.string;
+ /* xgettext:c-format */
format = _("Unable to reach %s (at 0x%08x) from the "
"global pointer (at 0x%08x) because the "
"offset (%d) is out of the allowed range, "
if (bfd_link_dll (info))
{
_bfd_error_handler
+ /* xgettext:c-format */
(_("%B(%A+0x%lx): R_NIOS2_TLS_LE16 relocation not "
"permitted in shared object"),
input_bfd, input_section,
if (!htab->root.sgot && !create_got_section (dynobj, info))
return FALSE;
- _bfd_elf_create_dynamic_sections (dynobj, info);
+ if (!_bfd_elf_create_dynamic_sections (dynobj, info))
+ return FALSE;
/* In order for the two loads in a shared object .PLTresolve to share the
same %hiadj, the start of the PLT (as well as the GOT) must be aligned
to a 16-byte boundary. This is because the addresses for these loads
include the -(.plt+4) PIC correction. */
- if (!bfd_set_section_alignment (dynobj, htab->root.splt, 4))
- return FALSE;
-
- htab->sdynbss = bfd_get_linker_section (dynobj, ".dynbss");
- if (!htab->sdynbss)
- return FALSE;
- if (!bfd_link_pic (info))
- {
- htab->srelbss = bfd_get_linker_section (dynobj, ".rela.bss");
- if (!htab->srelbss)
- return FALSE;
- }
-
- return TRUE;
+ return bfd_set_section_alignment (dynobj, htab->root.splt, 4);
}
/* Implement elf_backend_copy_indirect_symbol:
&& (h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak));
- s = htab->srelbss;
- BFD_ASSERT (s != NULL);
-
rela.r_offset = (h->root.u.def.value
+ h->root.u.def.section->output_section->vma
+ h->root.u.def.section->output_offset);
rela.r_info = ELF32_R_INFO (h->dynindx, R_NIOS2_COPY);
rela.r_addend = 0;
+ if ((h->root.u.def.section->flags & SEC_READONLY) != 0)
+ s = htab->root.sreldynrelro;
+ else
+ s = htab->root.srelbss;
+ BFD_ASSERT (s != NULL);
loc = s->contents + s->reloc_count++ * sizeof (Elf32_External_Rela);
bfd_elf32_swap_reloca_out (output_bfd, &rela, loc);
}
bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon);
break;
- case DT_RELASZ:
- /* The procedure linkage table relocs (DT_JMPREL) should
- not be included in the overall relocs (DT_RELA).
- Therefore, we override the DT_RELASZ entry here to
- make it not include the JMPREL relocs. Since the
- linker script arranges for .rela.plt to follow all
- other relocation sections, we don't have to worry
- about changing the DT_RELA entry. */
- s = htab->root.srelplt;
- if (s != NULL)
- dyn.d_un.d_val -= s->size;
- bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon);
- break;
-
case DT_NIOS2_GP:
s = htab->root.sgotplt;
dyn.d_un.d_ptr
{
struct elf32_nios2_link_hash_table *htab;
bfd *dynobj;
- asection *s;
+ asection *s, *srel;
unsigned align2;
htab = elf32_nios2_hash_table (info);
determine the address it must put in the global offset table, so
both the dynamic object and the regular object will refer to the
same memory location for the variable. */
- s = htab->sdynbss;
- BFD_ASSERT (s != NULL);
-
/* We must generate a R_NIOS2_COPY reloc to tell the dynamic linker to
copy the initial value out of the dynamic object and into the
runtime process image. We need to remember the offset into the
.rela.bss section we are going to use. */
+ if ((h->root.u.def.section->flags & SEC_READONLY) != 0)
+ {
+ s = htab->root.sdynrelro;
+ srel = htab->root.sreldynrelro;
+ }
+ else
+ {
+ s = htab->root.sdynbss;
+ srel = htab->root.srelbss;
+ }
if ((h->root.u.def.section->flags & SEC_ALLOC) != 0)
{
- asection *srel;
-
- srel = htab->srelbss;
- BFD_ASSERT (srel != NULL);
srel->size += sizeof (Elf32_External_Rela);
h->needs_copy = 1;
}
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- if (strcmp (name, ".plt") == 0)
+ if (s == htab->root.splt)
{
/* Remember whether there is a PLT. */
plt = s->size != 0;
s->reloc_count = 0;
}
}
- else if (CONST_STRNEQ (name, ".got"))
- got = s->size != 0;
- else if (strcmp (name, ".dynbss") != 0)
+ else if (s == htab->root.sgot
+ || s == htab->root.sgotplt)
+ {
+ if (s->size != 0)
+ got = TRUE;
+ }
+ else if (s != htab->root.sdynbss
+ && s != htab->root.sdynrelro)
/* It's not one of our sections, so don't allocate space. */
continue;
#define elf_backend_can_refcount 1
#define elf_backend_plt_readonly 1
#define elf_backend_want_got_plt 1
+#define elf_backend_want_dynrelro 1
#define elf_backend_rela_normal 1
+#define elf_backend_dtrel_excludes_plt 1
#define elf_backend_relocate_section nios2_elf32_relocate_section
#define elf_backend_section_flags nios2_elf32_section_flags