/* Xtensa-specific support for 32-bit ELF.
- Copyright 2003, 2004, 2005 Free Software Foundation, Inc.
+ Copyright 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
This file is part of BFD, the Binary File Descriptor library.
#include "bfd.h"
#include "sysdep.h"
-#ifdef ANSI_PROTOTYPES
#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
#include <strings.h>
#include "bfdlink.h"
/* Local helper functions. */
-static bfd_boolean add_extra_plt_sections (bfd *, int);
-static char *build_encoding_error_message (xtensa_opcode, bfd_vma);
+static bfd_boolean add_extra_plt_sections (struct bfd_link_info *, int);
+static char *vsprint_msg (const char *, const char *, int, ...) ATTRIBUTE_PRINTF(2,4);
static bfd_reloc_status_type bfd_elf_xtensa_reloc
(bfd *, arelent *, asymbol *, void *, asection *, bfd *, char **);
static bfd_boolean do_fix_for_relocatable_link
/* Miscellaneous utility functions. */
-static asection *elf_xtensa_get_plt_section (bfd *, int);
-static asection *elf_xtensa_get_gotplt_section (bfd *, int);
+static asection *elf_xtensa_get_plt_section (struct bfd_link_info *, int);
+static asection *elf_xtensa_get_gotplt_section (struct bfd_link_info *, int);
static asection *get_elf_r_symndx_section (bfd *, unsigned long);
static struct elf_link_hash_entry *get_elf_r_symndx_hash_entry
(bfd *, unsigned long);
static bfd_boolean xtensa_is_littable_section (asection *);
static int internal_reloc_compare (const void *, const void *);
static int internal_reloc_matches (const void *, const void *);
-extern char *xtensa_get_property_section_name (asection *, const char *);
+extern asection *xtensa_get_property_section (asection *, const char *);
static flagword xtensa_get_property_predef_flags (asection *);
/* Other functions called directly by the linker. */
typedef struct xtensa_relax_info_struct xtensa_relax_info;
-/* Total count of PLT relocations seen during check_relocs.
- The actual PLT code must be split into multiple sections and all
- the sections have to be created before size_dynamic_sections,
- where we figure out the exact number of PLT entries that will be
- needed. It is OK if this count is an overestimate, e.g., some
- relocations may be removed by GC. */
-
-static int plt_reloc_count = 0;
-
-
/* The GNU tools do not easily allow extending interfaces to pass around
the pointer to the Xtensa ISA information, so instead we add a global
variable here (in BFD) that can be used by any of the tools that need
{
HOWTO (R_XTENSA_NONE, 0, 0, 0, FALSE, 0, complain_overflow_dont,
bfd_elf_xtensa_reloc, "R_XTENSA_NONE",
- FALSE, 0x00000000, 0x00000000, FALSE),
+ FALSE, 0, 0, FALSE),
HOWTO (R_XTENSA_32, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
bfd_elf_xtensa_reloc, "R_XTENSA_32",
TRUE, 0xffffffff, 0xffffffff, FALSE),
+
/* Replace a 32-bit value with a value from the runtime linker (only
used by linker-generated stub functions). The r_addend value is
special: 1 means to substitute a pointer to the runtime linker's
dynamic resolver function; 2 means to substitute the link map for
the shared object. */
HOWTO (R_XTENSA_RTLD, 0, 2, 32, FALSE, 0, complain_overflow_dont,
- NULL, "R_XTENSA_RTLD",
- FALSE, 0x00000000, 0x00000000, FALSE),
+ NULL, "R_XTENSA_RTLD", FALSE, 0, 0, FALSE),
+
HOWTO (R_XTENSA_GLOB_DAT, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
bfd_elf_generic_reloc, "R_XTENSA_GLOB_DAT",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ FALSE, 0, 0xffffffff, FALSE),
HOWTO (R_XTENSA_JMP_SLOT, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
bfd_elf_generic_reloc, "R_XTENSA_JMP_SLOT",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ FALSE, 0, 0xffffffff, FALSE),
HOWTO (R_XTENSA_RELATIVE, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
bfd_elf_generic_reloc, "R_XTENSA_RELATIVE",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ FALSE, 0, 0xffffffff, FALSE),
HOWTO (R_XTENSA_PLT, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
bfd_elf_xtensa_reloc, "R_XTENSA_PLT",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ FALSE, 0, 0xffffffff, FALSE),
+
EMPTY_HOWTO (7),
+
+ /* Old relocations for backward compatibility. */
HOWTO (R_XTENSA_OP0, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_OP0",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_OP0", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_OP1, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_OP1",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_OP1", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_OP2, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_OP2",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_OP2", FALSE, 0, 0, TRUE),
+
/* Assembly auto-expansion. */
HOWTO (R_XTENSA_ASM_EXPAND, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_ASM_EXPAND",
- FALSE, 0x00000000, 0x00000000, FALSE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_ASM_EXPAND", FALSE, 0, 0, TRUE),
/* Relax assembly auto-expansion. */
HOWTO (R_XTENSA_ASM_SIMPLIFY, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_ASM_SIMPLIFY",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_ASM_SIMPLIFY", FALSE, 0, 0, TRUE),
+
EMPTY_HOWTO (13),
EMPTY_HOWTO (14),
+
/* GNU extension to record C++ vtable hierarchy. */
HOWTO (R_XTENSA_GNU_VTINHERIT, 0, 2, 0, FALSE, 0, complain_overflow_dont,
NULL, "R_XTENSA_GNU_VTINHERIT",
- FALSE, 0x00000000, 0x00000000, FALSE),
+ FALSE, 0, 0, FALSE),
/* GNU extension to record C++ vtable member usage. */
HOWTO (R_XTENSA_GNU_VTENTRY, 0, 2, 0, FALSE, 0, complain_overflow_dont,
_bfd_elf_rel_vtable_reloc_fn, "R_XTENSA_GNU_VTENTRY",
- FALSE, 0x00000000, 0x00000000, FALSE),
+ FALSE, 0, 0, FALSE),
/* Relocations for supporting difference of symbols. */
HOWTO (R_XTENSA_DIFF8, 0, 0, 8, FALSE, 0, complain_overflow_bitfield,
- bfd_elf_xtensa_reloc, "R_XTENSA_DIFF8",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_DIFF8", FALSE, 0, 0xff, FALSE),
HOWTO (R_XTENSA_DIFF16, 0, 1, 16, FALSE, 0, complain_overflow_bitfield,
- bfd_elf_xtensa_reloc, "R_XTENSA_DIFF16",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_DIFF16", FALSE, 0, 0xffff, FALSE),
HOWTO (R_XTENSA_DIFF32, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
- bfd_elf_xtensa_reloc, "R_XTENSA_DIFF32",
- FALSE, 0xffffffff, 0xffffffff, FALSE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_DIFF32", FALSE, 0, 0xffffffff, FALSE),
/* General immediate operand relocations. */
HOWTO (R_XTENSA_SLOT0_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT0_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT0_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT1_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT1_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT1_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT2_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT2_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT2_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT3_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT3_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT3_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT4_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT4_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT4_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT5_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT5_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT5_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT6_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT6_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT6_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT7_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT7_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT7_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT8_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT8_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT8_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT9_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT9_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT9_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT10_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT10_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT10_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT11_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT11_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT11_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT12_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT12_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT12_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT13_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT13_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT13_OP", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT14_OP, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT14_OP",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT14_OP", FALSE, 0, 0, TRUE),
/* "Alternate" relocations. The meaning of these is opcode-specific. */
HOWTO (R_XTENSA_SLOT0_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT0_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT0_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT1_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT1_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT1_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT2_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT2_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT2_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT3_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT3_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT3_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT4_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT4_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT4_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT5_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT5_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT5_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT6_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT6_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT6_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT7_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT7_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT7_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT8_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT8_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT8_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT9_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT9_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT9_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT10_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT10_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT10_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT11_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT11_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT11_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT12_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT12_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT12_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT13_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT13_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE),
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT13_ALT", FALSE, 0, 0, TRUE),
HOWTO (R_XTENSA_SLOT14_ALT, 0, 0, 0, TRUE, 0, complain_overflow_dont,
- bfd_elf_xtensa_reloc, "R_XTENSA_SLOT14_ALT",
- FALSE, 0x00000000, 0x00000000, TRUE)
+ bfd_elf_xtensa_reloc, "R_XTENSA_SLOT14_ALT", FALSE, 0, 0, TRUE),
};
#if DEBUG_GEN_RELOC
0 /* unused */
};
+/* Xtensa ELF linker hash table. */
+
+struct elf_xtensa_link_hash_table
+{
+ struct elf_link_hash_table elf;
+
+ /* Short-cuts to get to dynamic linker sections. */
+ asection *sgot;
+ asection *sgotplt;
+ asection *srelgot;
+ asection *splt;
+ asection *srelplt;
+ asection *sgotloc;
+ asection *spltlittbl;
+
+ /* Total count of PLT relocations seen during check_relocs.
+ The actual PLT code must be split into multiple sections and all
+ the sections have to be created before size_dynamic_sections,
+ where we figure out the exact number of PLT entries that will be
+ needed. It is OK if this count is an overestimate, e.g., some
+ relocations may be removed by GC. */
+ int plt_reloc_count;
+};
+
+/* Get the Xtensa ELF linker hash table from a link_info structure. */
+
+#define elf_xtensa_hash_table(p) \
+ ((struct elf_xtensa_link_hash_table *) ((p)->hash))
+
+/* Create an Xtensa ELF linker hash table. */
+
+static struct bfd_link_hash_table *
+elf_xtensa_link_hash_table_create (bfd *abfd)
+{
+ struct elf_xtensa_link_hash_table *ret;
+ bfd_size_type amt = sizeof (struct elf_xtensa_link_hash_table);
+
+ ret = bfd_malloc (amt);
+ if (ret == NULL)
+ return NULL;
+
+ if (!_bfd_elf_link_hash_table_init (&ret->elf, abfd,
+ _bfd_elf_link_hash_newfunc,
+ sizeof (struct elf_link_hash_entry)))
+ {
+ free (ret);
+ return NULL;
+ }
+
+ ret->sgot = NULL;
+ ret->sgotplt = NULL;
+ ret->srelgot = NULL;
+ ret->splt = NULL;
+ ret->srelplt = NULL;
+ ret->sgotloc = NULL;
+ ret->spltlittbl = NULL;
+
+ ret->plt_reloc_count = 0;
+
+ return &ret->elf.root;
+}
static inline bfd_boolean
-xtensa_elf_dynamic_symbol_p (struct elf_link_hash_entry *h,
+elf_xtensa_dynamic_symbol_p (struct elf_link_hash_entry *h,
struct bfd_link_info *info)
{
/* Check if we should do dynamic things to this symbol. The
bfd_boolean output_addr)
{
asection *table_section;
- char *table_section_name;
bfd_size_type table_size = 0;
bfd_byte *table_data;
property_table_entry *blocks;
return 0;
}
- table_section_name = xtensa_get_property_section_name (section, sec_name);
- table_section = bfd_get_section_by_name (abfd, table_section_name);
- free (table_section_name);
+ table_section = xtensa_get_property_section (section, sec_name);
if (table_section)
table_size = table_section->size;
{
bfd_vma sym_off = get_elf_r_symndx_offset (abfd, r_symndx);
BFD_ASSERT (sym_off == 0);
- BFD_ASSERT (rel->r_addend == 0);
blocks[block_count].address =
(section_addr + sym_off + rel->r_addend
+ bfd_get_32 (abfd, table_data + rel->r_offset));
asection *sec,
const Elf_Internal_Rela *relocs)
{
+ struct elf_xtensa_link_hash_table *htab;
Elf_Internal_Shdr *symtab_hdr;
struct elf_link_hash_entry **sym_hashes;
const Elf_Internal_Rela *rel;
if (info->relocatable)
return TRUE;
+ htab = elf_xtensa_hash_table (info);
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (abfd);
/* Keep track of the total PLT relocation count even if we
don't yet know whether the dynamic sections will be
created. */
- plt_reloc_count += 1;
+ htab->plt_reloc_count += 1;
if (elf_hash_table (info)->dynamic_sections_created)
{
- if (!add_extra_plt_sections (elf_hash_table (info)->dynobj,
- plt_reloc_count))
+ if (! add_extra_plt_sections (info, htab->plt_reloc_count))
return FALSE;
}
}
}
-static void
-elf_xtensa_make_sym_local (struct bfd_link_info *info,
- struct elf_link_hash_entry *h)
-{
- if (info->shared)
- {
- if (h->plt.refcount > 0)
- {
- /* Will use RELATIVE relocs instead of JMP_SLOT relocs. */
- if (h->got.refcount < 0)
- h->got.refcount = 0;
- h->got.refcount += h->plt.refcount;
- h->plt.refcount = 0;
- }
- }
- else
- {
- /* Don't need any dynamic relocations at all. */
- h->plt.refcount = 0;
- h->got.refcount = 0;
- }
-}
-
-
-static void
-elf_xtensa_hide_symbol (struct bfd_link_info *info,
- struct elf_link_hash_entry *h,
- bfd_boolean force_local)
-{
- /* For a shared link, move the plt refcount to the got refcount to leave
- space for RELATIVE relocs. */
- elf_xtensa_make_sym_local (info, h);
-
- _bfd_elf_link_hash_hide_symbol (info, h, force_local);
-}
-
-
/* Return the section that should be marked against GC for a given
relocation. */
static asection *
elf_xtensa_gc_mark_hook (asection *sec,
- struct bfd_link_info *info ATTRIBUTE_UNUSED,
+ struct bfd_link_info *info,
Elf_Internal_Rela *rel,
struct elf_link_hash_entry *h,
Elf_Internal_Sym *sym)
{
- if (h)
- {
- switch (ELF32_R_TYPE (rel->r_info))
- {
- case R_XTENSA_GNU_VTINHERIT:
- case R_XTENSA_GNU_VTENTRY:
- break;
-
- default:
- switch (h->root.type)
- {
- case bfd_link_hash_defined:
- case bfd_link_hash_defweak:
- return h->root.u.def.section;
-
- case bfd_link_hash_common:
- return h->root.u.c.p->section;
-
- default:
- break;
- }
- }
- }
- else
- return bfd_section_from_elf_index (sec->owner, sym->st_shndx);
+ if (h != NULL)
+ switch (ELF32_R_TYPE (rel->r_info))
+ {
+ case R_XTENSA_GNU_VTINHERIT:
+ case R_XTENSA_GNU_VTENTRY:
+ return NULL;
+ }
- return NULL;
+ return _bfd_elf_gc_mark_hook (sec, info, rel, h, sym);
}
static bfd_boolean
elf_xtensa_create_dynamic_sections (bfd *dynobj, struct bfd_link_info *info)
{
+ struct elf_xtensa_link_hash_table *htab;
flagword flags, noalloc_flags;
- asection *s;
+
+ htab = elf_xtensa_hash_table (info);
/* First do all the standard stuff. */
if (! _bfd_elf_create_dynamic_sections (dynobj, info))
return FALSE;
+ htab->splt = bfd_get_section_by_name (dynobj, ".plt");
+ htab->srelplt = bfd_get_section_by_name (dynobj, ".rela.plt");
+ htab->sgot = bfd_get_section_by_name (dynobj, ".got");
+ htab->sgotplt = bfd_get_section_by_name (dynobj, ".got.plt");
/* Create any extra PLT sections in case check_relocs has already
been called on all the non-dynamic input files. */
- if (!add_extra_plt_sections (dynobj, plt_reloc_count))
+ if (! add_extra_plt_sections (info, htab->plt_reloc_count))
return FALSE;
noalloc_flags = (SEC_HAS_CONTENTS | SEC_IN_MEMORY
flags = noalloc_flags | SEC_ALLOC | SEC_LOAD;
/* Mark the ".got.plt" section READONLY. */
- s = bfd_get_section_by_name (dynobj, ".got.plt");
- if (s == NULL
- || ! bfd_set_section_flags (dynobj, s, flags))
+ if (htab->sgotplt == NULL
+ || ! bfd_set_section_flags (dynobj, htab->sgotplt, flags))
return FALSE;
/* Create ".rela.got". */
- s = bfd_make_section_with_flags (dynobj, ".rela.got", flags);
- if (s == NULL
- || ! bfd_set_section_alignment (dynobj, s, 2))
+ htab->srelgot = bfd_make_section_with_flags (dynobj, ".rela.got", flags);
+ if (htab->srelgot == NULL
+ || ! bfd_set_section_alignment (dynobj, htab->srelgot, 2))
return FALSE;
/* Create ".got.loc" (literal tables for use by dynamic linker). */
- s = bfd_make_section_with_flags (dynobj, ".got.loc", flags);
- if (s == NULL
- || ! bfd_set_section_alignment (dynobj, s, 2))
+ htab->sgotloc = bfd_make_section_with_flags (dynobj, ".got.loc", flags);
+ if (htab->sgotloc == NULL
+ || ! bfd_set_section_alignment (dynobj, htab->sgotloc, 2))
return FALSE;
/* Create ".xt.lit.plt" (literal table for ".got.plt*"). */
- s = bfd_make_section_with_flags (dynobj, ".xt.lit.plt",
- noalloc_flags);
- if (s == NULL
- || ! bfd_set_section_alignment (dynobj, s, 2))
+ htab->spltlittbl = bfd_make_section_with_flags (dynobj, ".xt.lit.plt",
+ noalloc_flags);
+ if (htab->spltlittbl == NULL
+ || ! bfd_set_section_alignment (dynobj, htab->spltlittbl, 2))
return FALSE;
return TRUE;
static bfd_boolean
-add_extra_plt_sections (bfd *dynobj, int count)
+add_extra_plt_sections (struct bfd_link_info *info, int count)
{
+ bfd *dynobj = elf_hash_table (info)->dynobj;
int chunk;
/* Iterate over all chunks except 0 which uses the standard ".plt" and
asection *s;
/* Stop when we find a section has already been created. */
- if (elf_xtensa_get_plt_section (dynobj, chunk))
+ if (elf_xtensa_get_plt_section (info, chunk))
break;
flags = (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY
sname = (char *) bfd_malloc (10);
sprintf (sname, ".plt.%u", chunk);
- s = bfd_make_section_with_flags (dynobj, sname,
- flags | SEC_CODE);
+ s = bfd_make_section_with_flags (dynobj, sname, flags | SEC_CODE);
if (s == NULL
|| ! bfd_set_section_alignment (dynobj, s, 2))
return FALSE;
static bfd_boolean
-elf_xtensa_fix_refcounts (struct elf_link_hash_entry *h, void *arg)
+elf_xtensa_allocate_dynrelocs (struct elf_link_hash_entry *h, void *arg)
{
- struct bfd_link_info *info = (struct bfd_link_info *) arg;
+ struct bfd_link_info *info;
+ struct elf_xtensa_link_hash_table *htab;
+ bfd_boolean is_dynamic;
- if (h->root.type == bfd_link_hash_warning)
- h = (struct elf_link_hash_entry *) h->root.u.i.link;
-
- if (! xtensa_elf_dynamic_symbol_p (h, info))
- elf_xtensa_make_sym_local (info, h);
-
- return TRUE;
-}
-
-
-static bfd_boolean
-elf_xtensa_allocate_plt_size (struct elf_link_hash_entry *h, void *arg)
-{
- asection *srelplt = (asection *) arg;
+ if (h->root.type == bfd_link_hash_indirect)
+ return TRUE;
if (h->root.type == bfd_link_hash_warning)
h = (struct elf_link_hash_entry *) h->root.u.i.link;
- if (h->plt.refcount > 0)
- srelplt->size += (h->plt.refcount * sizeof (Elf32_External_Rela));
-
- return TRUE;
-}
+ info = (struct bfd_link_info *) arg;
+ htab = elf_xtensa_hash_table (info);
+ is_dynamic = elf_xtensa_dynamic_symbol_p (h, info);
-static bfd_boolean
-elf_xtensa_allocate_got_size (struct elf_link_hash_entry *h, void *arg)
-{
- asection *srelgot = (asection *) arg;
+ if (! is_dynamic)
+ {
+ if (info->shared)
+ {
+ /* For shared objects, there's no need for PLT entries for local
+ symbols (use RELATIVE relocs instead of JMP_SLOT relocs). */
+ if (h->plt.refcount > 0)
+ {
+ if (h->got.refcount < 0)
+ h->got.refcount = 0;
+ h->got.refcount += h->plt.refcount;
+ h->plt.refcount = 0;
+ }
+ }
+ else
+ {
+ /* Don't need any dynamic relocations at all. */
+ h->plt.refcount = 0;
+ h->got.refcount = 0;
+ }
+ }
- if (h->root.type == bfd_link_hash_warning)
- h = (struct elf_link_hash_entry *) h->root.u.i.link;
+ if (h->plt.refcount > 0)
+ htab->srelplt->size += (h->plt.refcount * sizeof (Elf32_External_Rela));
if (h->got.refcount > 0)
- srelgot->size += (h->got.refcount * sizeof (Elf32_External_Rela));
+ htab->srelgot->size += (h->got.refcount * sizeof (Elf32_External_Rela));
return TRUE;
}
static void
-elf_xtensa_allocate_local_got_size (struct bfd_link_info *info,
- asection *srelgot)
+elf_xtensa_allocate_local_got_size (struct bfd_link_info *info)
{
+ struct elf_xtensa_link_hash_table *htab;
bfd *i;
+ htab = elf_xtensa_hash_table (info);
+
for (i = info->input_bfds; i; i = i->link_next)
{
bfd_signed_vma *local_got_refcounts;
for (j = 0; j < cnt; ++j)
{
if (local_got_refcounts[j] > 0)
- srelgot->size += (local_got_refcounts[j]
- * sizeof (Elf32_External_Rela));
+ htab->srelgot->size += (local_got_refcounts[j]
+ * sizeof (Elf32_External_Rela));
}
}
}
elf_xtensa_size_dynamic_sections (bfd *output_bfd ATTRIBUTE_UNUSED,
struct bfd_link_info *info)
{
+ struct elf_xtensa_link_hash_table *htab;
bfd *dynobj, *abfd;
asection *s, *srelplt, *splt, *sgotplt, *srelgot, *spltlittbl, *sgotloc;
bfd_boolean relplt, relgot;
plt_entries = 0;
plt_chunks = 0;
- srelgot = 0;
+ htab = elf_xtensa_hash_table (info);
dynobj = elf_hash_table (info)->dynobj;
if (dynobj == NULL)
abort ();
+ srelgot = htab->srelgot;
+ srelplt = htab->srelplt;
if (elf_hash_table (info)->dynamic_sections_created)
{
+ BFD_ASSERT (htab->srelgot != NULL
+ && htab->srelplt != NULL
+ && htab->sgot != NULL
+ && htab->spltlittbl != NULL
+ && htab->sgotloc != NULL);
+
/* Set the contents of the .interp section to the interpreter. */
if (info->executable)
{
}
/* Allocate room for one word in ".got". */
- s = bfd_get_section_by_name (dynobj, ".got");
- if (s == NULL)
- abort ();
- s->size = 4;
+ htab->sgot->size = 4;
- /* Adjust refcounts for symbols that we now know are not "dynamic". */
+ /* Allocate space in ".rela.got" for literals that reference global
+ symbols and space in ".rela.plt" for literals that have PLT
+ entries. */
elf_link_hash_traverse (elf_hash_table (info),
- elf_xtensa_fix_refcounts,
+ elf_xtensa_allocate_dynrelocs,
(void *) info);
- /* Allocate space in ".rela.got" for literals that reference
- global symbols. */
- srelgot = bfd_get_section_by_name (dynobj, ".rela.got");
- if (srelgot == NULL)
- abort ();
- elf_link_hash_traverse (elf_hash_table (info),
- elf_xtensa_allocate_got_size,
- (void *) srelgot);
-
/* If we are generating a shared object, we also need space in
".rela.got" for R_XTENSA_RELATIVE relocs for literals that
reference local symbols. */
if (info->shared)
- elf_xtensa_allocate_local_got_size (info, srelgot);
-
- /* Allocate space in ".rela.plt" for literals that have PLT entries. */
- srelplt = bfd_get_section_by_name (dynobj, ".rela.plt");
- if (srelplt == NULL)
- abort ();
- elf_link_hash_traverse (elf_hash_table (info),
- elf_xtensa_allocate_plt_size,
- (void *) srelplt);
+ elf_xtensa_allocate_local_got_size (info);
/* Allocate space in ".plt" to match the size of ".rela.plt". For
each PLT entry, we need the PLT code plus a 4-byte literal.
For each chunk of ".plt", we also need two more 4-byte
literals, two corresponding entries in ".rela.got", and an
8-byte entry in ".xt.lit.plt". */
- spltlittbl = bfd_get_section_by_name (dynobj, ".xt.lit.plt");
- if (spltlittbl == NULL)
- abort ();
-
+ spltlittbl = htab->spltlittbl;
plt_entries = srelplt->size / sizeof (Elf32_External_Rela);
plt_chunks =
(plt_entries + PLT_ENTRIES_PER_CHUNK - 1) / PLT_ENTRIES_PER_CHUNK;
created earlier because the initial count of PLT relocations
was an overestimate. */
for (chunk = 0;
- (splt = elf_xtensa_get_plt_section (dynobj, chunk)) != NULL;
+ (splt = elf_xtensa_get_plt_section (info, chunk)) != NULL;
chunk++)
{
int chunk_entries;
- sgotplt = elf_xtensa_get_gotplt_section (dynobj, chunk);
- if (sgotplt == NULL)
- abort ();
+ sgotplt = elf_xtensa_get_gotplt_section (info, chunk);
+ BFD_ASSERT (sgotplt != NULL);
if (chunk < plt_chunks - 1)
chunk_entries = PLT_ENTRIES_PER_CHUNK;
/* Allocate space in ".got.loc" to match the total size of all the
literal tables. */
- sgotloc = bfd_get_section_by_name (dynobj, ".got.loc");
- if (sgotloc == NULL)
- abort ();
+ sgotloc = htab->sgotloc;
sgotloc->size = spltlittbl->size;
for (abfd = info->input_bfds; abfd != NULL; abfd = abfd->link_next)
{
for (s = dynobj->sections; s != NULL; s = s->next)
{
const char *name;
- bfd_boolean strip;
if ((s->flags & SEC_LINKER_CREATED) == 0)
continue;
of the dynobj section names depend upon the input files. */
name = bfd_get_section_name (dynobj, s);
- strip = FALSE;
-
- if (strncmp (name, ".rela", 5) == 0)
- {
- if (strcmp (name, ".rela.plt") == 0)
- relplt = TRUE;
- else if (strcmp (name, ".rela.got") == 0)
- relgot = TRUE;
-
- /* We use the reloc_count field as a counter if we need
- to copy relocs into the output file. */
- s->reloc_count = 0;
- }
- else if (strncmp (name, ".plt.", 5) == 0
- || strncmp (name, ".got.plt.", 9) == 0)
+ if (CONST_STRNEQ (name, ".rela"))
{
- if (s->size == 0)
+ if (s->size != 0)
{
- /* If we don't need this section, strip it from the output
- file. We must create the ".plt*" and ".got.plt*"
- sections in create_dynamic_sections and/or check_relocs
- based on a conservative estimate of the PLT relocation
- count, because the sections must be created before the
- linker maps input sections to output sections. The
- linker does that before size_dynamic_sections, where we
- compute the exact size of the PLT, so there may be more
- of these sections than are actually needed. */
- strip = TRUE;
+ if (strcmp (name, ".rela.plt") == 0)
+ relplt = TRUE;
+ else if (strcmp (name, ".rela.got") == 0)
+ relgot = TRUE;
+
+ /* We use the reloc_count field as a counter if we need
+ to copy relocs into the output file. */
+ s->reloc_count = 0;
}
}
- else if (strcmp (name, ".got") != 0
+ else if (! CONST_STRNEQ (name, ".plt.")
+ && ! CONST_STRNEQ (name, ".got.plt.")
+ && strcmp (name, ".got") != 0
&& strcmp (name, ".plt") != 0
&& strcmp (name, ".got.plt") != 0
&& strcmp (name, ".xt.lit.plt") != 0
continue;
}
- if (strip)
- s->flags |= SEC_EXCLUDE;
- else
+ if (s->size == 0)
+ {
+ /* If we don't need this section, strip it from the output
+ file. We must create the ".plt*" and ".got.plt*"
+ sections in create_dynamic_sections and/or check_relocs
+ based on a conservative estimate of the PLT relocation
+ count, because the sections must be created before the
+ linker maps input sections to output sections. The
+ linker does that before size_dynamic_sections, where we
+ compute the exact size of the PLT, so there may be more
+ of these sections than are actually needed. */
+ s->flags |= SEC_EXCLUDE;
+ }
+ else if ((s->flags & SEC_HAS_CONTENTS) != 0)
{
/* Allocate memory for the section contents. */
s->contents = (bfd_byte *) bfd_zalloc (dynobj, s->size);
- if (s->contents == NULL && s->size != 0)
+ if (s->contents == NULL)
return FALSE;
}
}
/* Add the special XTENSA_RTLD relocations now. The offsets won't be
known until finish_dynamic_sections, but we need to get the relocs
in place before they are sorted. */
- if (srelgot == NULL)
- abort ();
for (chunk = 0; chunk < plt_chunks; chunk++)
{
Elf_Internal_Rela irela;
#define add_dynamic_entry(TAG, VAL) \
_bfd_elf_add_dynamic_entry (info, TAG, VAL)
- if (! info->shared)
+ if (info->executable)
{
if (!add_dynamic_entry (DT_DEBUG, 0))
return FALSE;
return TRUE;
}
-\f
-/* Remove any PT_LOAD segments with no allocated sections. Prior to
- binutils 2.13, this function used to remove the non-SEC_ALLOC
- sections from PT_LOAD segments, but that task has now been moved
- into elf.c. We still need this function to remove any empty
- segments that result, but there's nothing Xtensa-specific about
- this and it probably ought to be moved into elf.c as well. */
-
-static bfd_boolean
-elf_xtensa_modify_segment_map (bfd *abfd,
- struct bfd_link_info *info ATTRIBUTE_UNUSED)
-{
- struct elf_segment_map **m_p;
-
- m_p = &elf_tdata (abfd)->segment_map;
- while (*m_p)
- {
- if ((*m_p)->p_type == PT_LOAD && (*m_p)->count == 0)
- *m_p = (*m_p)->next;
- else
- m_p = &(*m_p)->next;
- }
- return TRUE;
-}
-
\f
/* Perform the specified relocation. The instruction at (contents + address)
is modified to set one operand to represent the value in "relocation". The
|| xtensa_operand_set_field (isa, opcode, opnd, fmt, slot,
sbuff, newval))
{
- *error_message = build_encoding_error_message (opcode, relocation);
+ const char *opname = xtensa_opcode_name (isa, opcode);
+ const char *msg;
+
+ msg = "cannot encode";
+ if (is_direct_call_opcode (opcode))
+ {
+ if ((relocation & 0x3) != 0)
+ msg = "misaligned call target";
+ else
+ msg = "call target out of range";
+ }
+ else if (opcode == get_l32r_opcode ())
+ {
+ if ((relocation & 0x3) != 0)
+ msg = "misaligned literal target";
+ else if (is_alt_relocation (howto->type))
+ msg = "literal target out of range (too many literals)";
+ else if (self_address > relocation)
+ msg = "literal target out of range (try using text-section-literals)";
+ else
+ msg = "literal placed after use";
+ }
+
+ *error_message = vsprint_msg (opname, ": %s", strlen (msg) + 2, msg);
return bfd_reloc_dangerous;
}
}
-static char * ATTRIBUTE_PRINTF(2,4)
+static char *
vsprint_msg (const char *origmsg, const char *fmt, int arglen, ...)
{
/* To reduce the size of the memory leak,
}
-static char *
-build_encoding_error_message (xtensa_opcode opcode, bfd_vma target_address)
-{
- const char *opname = xtensa_opcode_name (xtensa_default_isa, opcode);
- const char *msg;
-
- msg = "cannot encode";
- if (is_direct_call_opcode (opcode))
- {
- if ((target_address & 0x3) != 0)
- msg = "misaligned call target";
- else
- msg = "call target out of range";
- }
- else if (opcode == get_l32r_opcode ())
- {
- if ((target_address & 0x3) != 0)
- msg = "misaligned literal target";
- else
- msg = "literal target out of range";
- }
-
- return vsprint_msg (opname, ": %s", strlen (msg) + 2, msg);
-}
-
-
/* This function is registered as the "special_function" in the
Xtensa howto for handling simplify operations.
bfd_perform_relocation / bfd_install_relocation use it to
*error_message = "";
*error_message = vsprint_msg (*error_message, ": (%s + 0x%lx)",
strlen (symbol->name) + 17,
- symbol->name, reloc_entry->addend);
+ symbol->name,
+ (unsigned long) reloc_entry->addend);
}
return flag;
/* Set up an entry in the procedure linkage table. */
static bfd_vma
-elf_xtensa_create_plt_entry (bfd *dynobj,
+elf_xtensa_create_plt_entry (struct bfd_link_info *info,
bfd *output_bfd,
unsigned reloc_index)
{
int chunk;
chunk = reloc_index / PLT_ENTRIES_PER_CHUNK;
- splt = elf_xtensa_get_plt_section (dynobj, chunk);
- sgotplt = elf_xtensa_get_gotplt_section (dynobj, chunk);
+ splt = elf_xtensa_get_plt_section (info, chunk);
+ sgotplt = elf_xtensa_get_gotplt_section (info, chunk);
BFD_ASSERT (splt != NULL && sgotplt != NULL);
plt_base = splt->output_section->vma + splt->output_offset;
Elf_Internal_Sym *local_syms,
asection **local_sections)
{
+ struct elf_xtensa_link_hash_table *htab;
Elf_Internal_Shdr *symtab_hdr;
Elf_Internal_Rela *rel;
Elf_Internal_Rela *relend;
struct elf_link_hash_entry **sym_hashes;
- asection *srelgot, *srelplt;
- bfd *dynobj;
property_table_entry *lit_table = 0;
int ltblsize = 0;
char *error_message = NULL;
if (!xtensa_default_isa)
xtensa_default_isa = xtensa_isa_init (0, 0);
- dynobj = elf_hash_table (info)->dynobj;
+ htab = elf_xtensa_hash_table (info);
symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (input_bfd);
- srelgot = NULL;
- srelplt = NULL;
- if (dynobj)
- {
- srelgot = bfd_get_section_by_name (dynobj, ".rela.got");;
- srelplt = bfd_get_section_by_name (dynobj, ".rela.plt");
- }
-
if (elf_hash_table (info)->dynamic_sections_created)
{
ltblsize = xtensa_read_table_entries (input_bfd, input_section,
/* Generate dynamic relocations. */
if (elf_hash_table (info)->dynamic_sections_created)
{
- bfd_boolean dynamic_symbol = xtensa_elf_dynamic_symbol_p (h, info);
+ bfd_boolean dynamic_symbol = elf_xtensa_dynamic_symbol_p (h, info);
if (dynamic_symbol && is_operand_relocation (r_type))
{
asection *srel;
if (dynamic_symbol && r_type == R_XTENSA_PLT)
- srel = srelplt;
+ srel = htab->srelplt;
else
- srel = srelgot;
+ srel = htab->srelgot;
BFD_ASSERT (srel != NULL);
contents of the literal entry to the address of
the PLT entry. */
relocation =
- elf_xtensa_create_plt_entry (dynobj, output_bfd,
+ elf_xtensa_create_plt_entry (info, output_bfd,
srel->reloc_count);
}
unresolved_reloc = FALSE;
if (unresolved_reloc
&& !((input_section->flags & SEC_DEBUGGING) != 0
&& h->def_dynamic))
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): unresolvable relocation against symbol `%s'"),
- input_bfd,
- input_section,
- (long) rel->r_offset,
- h->root.root.string);
+ {
+ (*_bfd_error_handler)
+ (_("%B(%A+0x%lx): unresolvable %s relocation against symbol `%s'"),
+ input_bfd,
+ input_section,
+ (long) rel->r_offset,
+ howto->name,
+ h->root.root.string);
+ return FALSE;
+ }
+
+ if (r_symndx == 0)
+ {
+ /* r_symndx will be zero only for relocs against symbols from
+ removed linkonce sections, or sections discarded by a linker
+ script. For these relocs, we just want the section contents
+ zeroed. Avoid any special processing. */
+ _bfd_clear_contents (howto, input_bfd, contents + rel->r_offset);
+ continue;
+ }
/* There's no point in calling bfd_perform_relocation here.
Just go directly to our "special function". */
struct elf_link_hash_entry *h,
Elf_Internal_Sym *sym)
{
- if (h->needs_plt
- && !h->def_regular)
+ if (h->needs_plt && !h->def_regular)
{
/* Mark the symbol as undefined, rather than as defined in
the .plt section. Leave the value alone. */
sym->st_shndx = SHN_UNDEF;
+ /* If the symbol is weak, we do need to clear the value.
+ Otherwise, the PLT entry would provide a definition for
+ the symbol even if the symbol wasn't defined anywhere,
+ and so the symbol would never be NULL. */
+ if (!h->ref_regular_nonweak)
+ sym->st_value = 0;
}
/* Mark _DYNAMIC and _GLOBAL_OFFSET_TABLE_ as absolute. */
if (strcmp (h->root.root.string, "_DYNAMIC") == 0
- || strcmp (h->root.root.string, "_GLOBAL_OFFSET_TABLE_") == 0)
+ || h == elf_hash_table (info)->hgot)
sym->st_shndx = SHN_ABS;
return TRUE;
elf_xtensa_finish_dynamic_sections (bfd *output_bfd,
struct bfd_link_info *info)
{
+ struct elf_xtensa_link_hash_table *htab;
bfd *dynobj;
asection *sdyn, *srelplt, *sgot, *sxtlit, *sgotloc;
Elf32_External_Dyn *dyncon, *dynconend;
if (! elf_hash_table (info)->dynamic_sections_created)
return TRUE;
+ htab = elf_xtensa_hash_table (info);
dynobj = elf_hash_table (info)->dynobj;
sdyn = bfd_get_section_by_name (dynobj, ".dynamic");
BFD_ASSERT (sdyn != NULL);
/* Set the first entry in the global offset table to the address of
the dynamic section. */
- sgot = bfd_get_section_by_name (dynobj, ".got");
+ sgot = htab->sgot;
if (sgot)
{
BFD_ASSERT (sgot->size == 4);
sgot->contents);
}
- srelplt = bfd_get_section_by_name (dynobj, ".rela.plt");
+ srelplt = htab->srelplt;
if (srelplt && srelplt->size != 0)
{
asection *sgotplt, *srelgot, *spltlittbl;
bfd_byte *loc;
unsigned rtld_reloc;
- srelgot = bfd_get_section_by_name (dynobj, ".rela.got");;
- BFD_ASSERT (srelgot != NULL);
-
- spltlittbl = bfd_get_section_by_name (dynobj, ".xt.lit.plt");
- BFD_ASSERT (spltlittbl != NULL);
+ srelgot = htab->srelgot;
+ spltlittbl = htab->spltlittbl;
+ BFD_ASSERT (srelgot != NULL && spltlittbl != NULL);
/* Find the first XTENSA_RTLD relocation. Presumably the rest
of them follow immediately after.... */
{
int chunk_entries = 0;
- sgotplt = elf_xtensa_get_gotplt_section (dynobj, chunk);
+ sgotplt = elf_xtensa_get_gotplt_section (info, chunk);
BFD_ASSERT (sgotplt != NULL);
/* Emit special RTLD relocations for the first two entries in
/* Combine adjacent literal table entries. */
BFD_ASSERT (! info->relocatable);
sxtlit = bfd_get_section_by_name (output_bfd, ".xt.lit");
- sgotloc = bfd_get_section_by_name (dynobj, ".got.loc");
+ sgotloc = htab->sgotloc;
BFD_ASSERT (sxtlit && sgotloc);
num_xtlit_entries =
elf_xtensa_combine_prop_entries (output_bfd, sxtlit, sgotloc);
for (; dyncon < dynconend; dyncon++)
{
Elf_Internal_Dyn dyn;
- const char *name;
- asection *s;
bfd_elf32_swap_dyn_in (dynobj, dyncon, &dyn);
break;
case DT_XTENSA_GOT_LOC_OFF:
- name = ".got.loc";
- goto get_vma;
+ dyn.d_un.d_ptr = htab->sgotloc->vma;
+ break;
+
case DT_PLTGOT:
- name = ".got";
- goto get_vma;
+ dyn.d_un.d_ptr = htab->sgot->vma;
+ break;
+
case DT_JMPREL:
- name = ".rela.plt";
- get_vma:
- s = bfd_get_section_by_name (output_bfd, name);
- BFD_ASSERT (s);
- dyn.d_un.d_ptr = s->vma;
+ dyn.d_un.d_ptr = htab->srelplt->vma;
break;
case DT_PLTRELSZ:
- s = bfd_get_section_by_name (output_bfd, ".rela.plt");
- BFD_ASSERT (s);
- dyn.d_un.d_val = s->size;
+ dyn.d_un.d_val = htab->srelplt->size;
break;
case DT_RELASZ:
seems to be unresolved. Since the linker script arranges
for .rela.plt to follow all other relocation sections, we
don't have to worry about changing the DT_RELA entry. */
- s = bfd_get_section_by_name (output_bfd, ".rela.plt");
- if (s)
- dyn.d_un.d_val -= s->size;
+ if (htab->srelplt)
+ dyn.d_un.d_val -= htab->srelplt->size;
break;
}
if (xtensa_is_littable_section (sec))
{
- bfd *dynobj = elf_hash_table (info)->dynobj;
- if (dynobj)
- {
- asection *sgotloc =
- bfd_get_section_by_name (dynobj, ".got.loc");
- if (sgotloc)
- sgotloc->size -= removed_bytes;
- }
+ asection *sgotloc = elf_xtensa_hash_table (info)->sgotloc;
+ if (sgotloc)
+ sgotloc->size -= removed_bytes;
}
}
else
return xtensa_is_property_section (sec);
}
+
+static unsigned int
+elf_xtensa_action_discarded (asection *sec)
+{
+ if (strcmp (".xt_except_table", sec->name) == 0)
+ return 0;
+
+ if (strcmp (".xt_except_desc", sec->name) == 0)
+ return 0;
+
+ return _bfd_elf_default_action_discarded (sec);
+}
+
\f
/* Support for core dump NOTE sections. */
bfd_vma address)
{
bfd_size_type loop_len, insn_len;
- xtensa_opcode opcode =
- insn_decode_opcode (contents, content_length, offset, 0);
- BFD_ASSERT (opcode != XTENSA_UNDEFINED);
- if (opcode != XTENSA_UNDEFINED)
- return FALSE;
- BFD_ASSERT (xtensa_opcode_is_loop (xtensa_default_isa, opcode));
- if (!xtensa_opcode_is_loop (xtensa_default_isa, opcode))
- return FALSE;
+ xtensa_opcode opcode;
+ opcode = insn_decode_opcode (contents, content_length, offset, 0);
+ if (opcode == XTENSA_UNDEFINED
+ || xtensa_opcode_is_loop (xtensa_default_isa, opcode) != 1)
+ {
+ BFD_ASSERT (FALSE);
+ return FALSE;
+ }
+
loop_len = insn_decode_len (contents, content_length, offset);
- BFD_ASSERT (loop_len != 0);
- if (loop_len == 0)
- return FALSE;
-
insn_len = insn_decode_len (contents, content_length, offset + loop_len);
- BFD_ASSERT (insn_len != 0);
- if (insn_len == 0)
- return FALSE;
+ if (loop_len == 0 || insn_len == 0)
+ {
+ BFD_ASSERT (FALSE);
+ return FALSE;
+ }
return check_branch_target_aligned_address (address + loop_len, insn_len);
}
};
-/* Attempt to narrow an instruction. Return true if the narrowing is
- valid. If the do_it parameter is non-zero, then perform the action
- in-place directly into the contents. Otherwise, do not modify the
- contents. The set of valid narrowing are specified by a string table
+/* Check if an instruction can be "narrowed", i.e., changed from a standard
+ 3-byte instruction to a 2-byte "density" instruction. If it is valid,
+ return the instruction buffer holding the narrow instruction. Otherwise,
+ return 0. The set of valid narrowing are specified by a string table
but require some special case operand checks in some cases. */
-static bfd_boolean
-narrow_instruction (bfd_byte *contents,
- bfd_size_type content_length,
- bfd_size_type offset,
- bfd_boolean do_it)
+static xtensa_insnbuf
+can_narrow_instruction (xtensa_insnbuf slotbuf,
+ xtensa_format fmt,
+ xtensa_opcode opcode)
{
- xtensa_opcode opcode;
- bfd_size_type insn_len, opi;
xtensa_isa isa = xtensa_default_isa;
- xtensa_format fmt, o_fmt;
+ xtensa_format o_fmt;
+ unsigned opi;
- static xtensa_insnbuf insnbuf = NULL;
- static xtensa_insnbuf slotbuf = NULL;
static xtensa_insnbuf o_insnbuf = NULL;
static xtensa_insnbuf o_slotbuf = NULL;
- if (insnbuf == NULL)
+ if (o_insnbuf == NULL)
{
- insnbuf = xtensa_insnbuf_alloc (isa);
- slotbuf = xtensa_insnbuf_alloc (isa);
o_insnbuf = xtensa_insnbuf_alloc (isa);
o_slotbuf = xtensa_insnbuf_alloc (isa);
}
- BFD_ASSERT (offset < content_length);
-
- if (content_length < 2)
- return FALSE;
-
- /* We will hand-code a few of these for a little while.
- These have all been specified in the assembler aleady. */
- xtensa_insnbuf_from_chars (isa, insnbuf, &contents[offset],
- content_length - offset);
- fmt = xtensa_format_decode (isa, insnbuf);
- if (xtensa_format_num_slots (isa, fmt) != 1)
- return FALSE;
-
- if (xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf) != 0)
- return FALSE;
-
- opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
- if (opcode == XTENSA_UNDEFINED)
- return FALSE;
- insn_len = xtensa_format_length (isa, fmt);
- if (insn_len > content_length)
- return FALSE;
-
- for (opi = 0; opi < (sizeof (narrowable)/sizeof (struct string_pair)); ++opi)
+ for (opi = 0; opi < (sizeof (narrowable)/sizeof (struct string_pair)); opi++)
{
bfd_boolean is_or = (strcmp ("or", narrowable[opi].wide) == 0);
o_opcode = xtensa_opcode_lookup (isa, narrowable[opi].narrow);
if (o_opcode == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
o_fmt = get_single_format (o_opcode);
if (o_fmt == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
if (xtensa_format_length (isa, fmt) != 3
|| xtensa_format_length (isa, o_fmt) != 2)
- return FALSE;
+ return 0;
xtensa_format_encode (isa, o_fmt, o_insnbuf);
operand_count = xtensa_opcode_num_operands (isa, opcode);
o_operand_count = xtensa_opcode_num_operands (isa, o_opcode);
if (xtensa_opcode_encode (isa, o_fmt, 0, o_slotbuf, o_opcode) != 0)
- return FALSE;
+ return 0;
if (!is_or)
{
if (xtensa_opcode_num_operands (isa, o_opcode) != operand_count)
- return FALSE;
+ return 0;
}
else
{
uint32 rawval0, rawval1, rawval2;
- if (o_operand_count + 1 != operand_count)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 0,
- fmt, 0, slotbuf, &rawval0) != 0)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 1,
- fmt, 0, slotbuf, &rawval1) != 0)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 2,
- fmt, 0, slotbuf, &rawval2) != 0)
- return FALSE;
-
- if (rawval1 != rawval2)
- return FALSE;
- if (rawval0 == rawval1) /* it is a nop */
- return FALSE;
+ if (o_operand_count + 1 != operand_count
+ || xtensa_operand_get_field (isa, opcode, 0,
+ fmt, 0, slotbuf, &rawval0) != 0
+ || xtensa_operand_get_field (isa, opcode, 1,
+ fmt, 0, slotbuf, &rawval1) != 0
+ || xtensa_operand_get_field (isa, opcode, 2,
+ fmt, 0, slotbuf, &rawval2) != 0
+ || rawval1 != rawval2
+ || rawval0 == rawval1 /* it is a nop */)
+ return 0;
}
for (i = 0; i < o_operand_count; ++i)
if (xtensa_operand_get_field (isa, opcode, i, fmt, 0,
slotbuf, &value)
|| xtensa_operand_decode (isa, opcode, i, &value))
- return FALSE;
+ return 0;
/* PC-relative branches need adjustment, but
the PC-rel operand will always have a relocation. */
|| xtensa_operand_encode (isa, o_opcode, i, &newval)
|| xtensa_operand_set_field (isa, o_opcode, i, o_fmt, 0,
o_slotbuf, newval))
- return FALSE;
+ return 0;
}
- if (xtensa_format_set_slot (isa, o_fmt, 0,
- o_insnbuf, o_slotbuf) != 0)
- return FALSE;
+ if (xtensa_format_set_slot (isa, o_fmt, 0, o_insnbuf, o_slotbuf))
+ return 0;
- if (do_it)
- xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
- content_length - offset);
- return TRUE;
+ return o_insnbuf;
}
}
- return FALSE;
+ return 0;
}
-/* Attempt to widen an instruction. Return true if the widening is
- valid. If the do_it parameter is non-zero, then the action should
- be performed inplace into the contents. Otherwise, do not modify
- the contents. The set of valid widenings are specified by a string
- table but require some special case operand checks in some
- cases. */
+/* Attempt to narrow an instruction. If the narrowing is valid, perform
+ the action in-place directly into the contents and return TRUE. Otherwise,
+ the return value is FALSE and the contents are not modified. */
static bfd_boolean
-widen_instruction (bfd_byte *contents,
- bfd_size_type content_length,
- bfd_size_type offset,
- bfd_boolean do_it)
+narrow_instruction (bfd_byte *contents,
+ bfd_size_type content_length,
+ bfd_size_type offset)
{
xtensa_opcode opcode;
- bfd_size_type insn_len, opi;
+ bfd_size_type insn_len;
xtensa_isa isa = xtensa_default_isa;
- xtensa_format fmt, o_fmt;
+ xtensa_format fmt;
+ xtensa_insnbuf o_insnbuf;
static xtensa_insnbuf insnbuf = NULL;
static xtensa_insnbuf slotbuf = NULL;
- static xtensa_insnbuf o_insnbuf = NULL;
- static xtensa_insnbuf o_slotbuf = NULL;
if (insnbuf == NULL)
{
insnbuf = xtensa_insnbuf_alloc (isa);
slotbuf = xtensa_insnbuf_alloc (isa);
- o_insnbuf = xtensa_insnbuf_alloc (isa);
- o_slotbuf = xtensa_insnbuf_alloc (isa);
}
BFD_ASSERT (offset < content_length);
if (content_length < 2)
return FALSE;
- /* We will hand code a few of these for a little while.
+ /* We will hand-code a few of these for a little while.
These have all been specified in the assembler aleady. */
xtensa_insnbuf_from_chars (isa, insnbuf, &contents[offset],
content_length - offset);
if (xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf) != 0)
return FALSE;
- opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
- if (opcode == XTENSA_UNDEFINED)
- return FALSE;
- insn_len = xtensa_format_length (isa, fmt);
- if (insn_len > content_length)
- return FALSE;
+ opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
+ if (opcode == XTENSA_UNDEFINED)
+ return FALSE;
+ insn_len = xtensa_format_length (isa, fmt);
+ if (insn_len > content_length)
+ return FALSE;
+
+ o_insnbuf = can_narrow_instruction (slotbuf, fmt, opcode);
+ if (o_insnbuf)
+ {
+ xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
+ content_length - offset);
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+
+/* Check if an instruction can be "widened", i.e., changed from a 2-byte
+ "density" instruction to a standard 3-byte instruction. If it is valid,
+ return the instruction buffer holding the wide instruction. Otherwise,
+ return 0. The set of valid widenings are specified by a string table
+ but require some special case operand checks in some cases. */
+
+static xtensa_insnbuf
+can_widen_instruction (xtensa_insnbuf slotbuf,
+ xtensa_format fmt,
+ xtensa_opcode opcode)
+{
+ xtensa_isa isa = xtensa_default_isa;
+ xtensa_format o_fmt;
+ unsigned opi;
+
+ static xtensa_insnbuf o_insnbuf = NULL;
+ static xtensa_insnbuf o_slotbuf = NULL;
+
+ if (o_insnbuf == NULL)
+ {
+ o_insnbuf = xtensa_insnbuf_alloc (isa);
+ o_slotbuf = xtensa_insnbuf_alloc (isa);
+ }
- for (opi = 0; opi < (sizeof (widenable)/sizeof (struct string_pair)); ++opi)
+ for (opi = 0; opi < (sizeof (widenable)/sizeof (struct string_pair)); opi++)
{
bfd_boolean is_or = (strcmp ("or", widenable[opi].wide) == 0);
bfd_boolean is_branch = (strcmp ("beqz", widenable[opi].wide) == 0
o_opcode = xtensa_opcode_lookup (isa, widenable[opi].wide);
if (o_opcode == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
o_fmt = get_single_format (o_opcode);
if (o_fmt == XTENSA_UNDEFINED)
- return FALSE;
+ return 0;
if (xtensa_format_length (isa, fmt) != 2
|| xtensa_format_length (isa, o_fmt) != 3)
- return FALSE;
+ return 0;
xtensa_format_encode (isa, o_fmt, o_insnbuf);
operand_count = xtensa_opcode_num_operands (isa, opcode);
check_operand_count = o_operand_count;
if (xtensa_opcode_encode (isa, o_fmt, 0, o_slotbuf, o_opcode) != 0)
- return FALSE;
+ return 0;
if (!is_or)
{
if (xtensa_opcode_num_operands (isa, o_opcode) != operand_count)
- return FALSE;
+ return 0;
}
else
{
uint32 rawval0, rawval1;
- if (o_operand_count != operand_count + 1)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 0,
- fmt, 0, slotbuf, &rawval0) != 0)
- return FALSE;
- if (xtensa_operand_get_field (isa, opcode, 1,
- fmt, 0, slotbuf, &rawval1) != 0)
- return FALSE;
- if (rawval0 == rawval1) /* it is a nop */
- return FALSE;
+ if (o_operand_count != operand_count + 1
+ || xtensa_operand_get_field (isa, opcode, 0,
+ fmt, 0, slotbuf, &rawval0) != 0
+ || xtensa_operand_get_field (isa, opcode, 1,
+ fmt, 0, slotbuf, &rawval1) != 0
+ || rawval0 == rawval1 /* it is a nop */)
+ return 0;
}
if (is_branch)
check_operand_count--;
- for (i = 0; i < check_operand_count; ++i)
+ for (i = 0; i < check_operand_count; i++)
{
int new_i = i;
if (is_or && i == o_operand_count - 1)
if (xtensa_operand_get_field (isa, opcode, new_i, fmt, 0,
slotbuf, &value)
|| xtensa_operand_decode (isa, opcode, new_i, &value))
- return FALSE;
+ return 0;
/* PC-relative branches need adjustment, but
the PC-rel operand will always have a relocation. */
|| xtensa_operand_encode (isa, o_opcode, i, &newval)
|| xtensa_operand_set_field (isa, o_opcode, i, o_fmt, 0,
o_slotbuf, newval))
- return FALSE;
+ return 0;
}
if (xtensa_format_set_slot (isa, o_fmt, 0, o_insnbuf, o_slotbuf))
- return FALSE;
+ return 0;
- if (do_it)
- xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
- content_length - offset);
- return TRUE;
+ return o_insnbuf;
}
}
+ return 0;
+}
+
+
+/* Attempt to widen an instruction. If the widening is valid, perform
+ the action in-place directly into the contents and return TRUE. Otherwise,
+ the return value is FALSE and the contents are not modified. */
+
+static bfd_boolean
+widen_instruction (bfd_byte *contents,
+ bfd_size_type content_length,
+ bfd_size_type offset)
+{
+ xtensa_opcode opcode;
+ bfd_size_type insn_len;
+ xtensa_isa isa = xtensa_default_isa;
+ xtensa_format fmt;
+ xtensa_insnbuf o_insnbuf;
+
+ static xtensa_insnbuf insnbuf = NULL;
+ static xtensa_insnbuf slotbuf = NULL;
+
+ if (insnbuf == NULL)
+ {
+ insnbuf = xtensa_insnbuf_alloc (isa);
+ slotbuf = xtensa_insnbuf_alloc (isa);
+ }
+
+ BFD_ASSERT (offset < content_length);
+
+ if (content_length < 2)
+ return FALSE;
+
+ /* We will hand-code a few of these for a little while.
+ These have all been specified in the assembler aleady. */
+ xtensa_insnbuf_from_chars (isa, insnbuf, &contents[offset],
+ content_length - offset);
+ fmt = xtensa_format_decode (isa, insnbuf);
+ if (xtensa_format_num_slots (isa, fmt) != 1)
+ return FALSE;
+
+ if (xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf) != 0)
+ return FALSE;
+
+ opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
+ if (opcode == XTENSA_UNDEFINED)
+ return FALSE;
+ insn_len = xtensa_format_length (isa, fmt);
+ if (insn_len > content_length)
+ return FALSE;
+
+ o_insnbuf = can_widen_instruction (slotbuf, fmt, opcode);
+ if (o_insnbuf)
+ {
+ xtensa_insnbuf_to_chars (isa, o_insnbuf, contents + offset,
+ content_length - offset);
+ return TRUE;
+ }
return FALSE;
}
}
+static unsigned
+action_list_count (text_action_list *action_list)
+{
+ text_action *r = action_list->head;
+ unsigned count = 0;
+ for (r = action_list->head; r != NULL; r = r->next)
+ {
+ count++;
+ }
+ return count;
+}
+
+
static bfd_vma
offset_with_removed_text_before_fill (text_action_list *action_list,
bfd_vma offset)
static bfd_boolean
elf_xtensa_new_section_hook (bfd *abfd, asection *sec)
{
- struct elf_xtensa_section_data *sdata;
- bfd_size_type amt = sizeof (*sdata);
+ if (!sec->used_by_bfd)
+ {
+ struct elf_xtensa_section_data *sdata;
+ bfd_size_type amt = sizeof (*sdata);
- sdata = (struct elf_xtensa_section_data *) bfd_zalloc (abfd, amt);
- if (sdata == NULL)
- return FALSE;
- sec->used_by_bfd = (void *) sdata;
+ sdata = bfd_zalloc (abfd, amt);
+ if (sdata == NULL)
+ return FALSE;
+ sec->used_by_bfd = sdata;
+ }
return _bfd_elf_new_section_hook (abfd, sec);
}
static bfd_boolean compute_ebb_proposed_actions (ebb_constraint *);
static bfd_boolean compute_ebb_actions (ebb_constraint *);
static bfd_boolean check_section_ebb_pcrels_fit
- (bfd *, asection *, bfd_byte *, Elf_Internal_Rela *, const ebb_constraint *);
+ (bfd *, asection *, bfd_byte *, Elf_Internal_Rela *, const ebb_constraint *,
+ const xtensa_opcode *);
static bfd_boolean check_section_ebb_reduces (const ebb_constraint *);
static void text_action_add_proposed
(text_action_list *, const ebb_constraint *, asection *);
}
+static xtensa_opcode *
+build_reloc_opcodes (bfd *abfd,
+ asection *sec,
+ bfd_byte *contents,
+ Elf_Internal_Rela *internal_relocs)
+{
+ unsigned i;
+ xtensa_opcode *reloc_opcodes =
+ (xtensa_opcode *) bfd_malloc (sizeof (xtensa_opcode) * sec->reloc_count);
+ for (i = 0; i < sec->reloc_count; i++)
+ {
+ Elf_Internal_Rela *irel = &internal_relocs[i];
+ reloc_opcodes[i] = get_relocation_opcode (abfd, sec, contents, irel);
+ }
+ return reloc_opcodes;
+}
+
+
/* The compute_text_actions function will build a list of potential
transformation actions for code in the extended basic block of each
longcall that is optimized to a direct call. From this list we
asection *sec,
struct bfd_link_info *link_info)
{
+ xtensa_opcode *reloc_opcodes = NULL;
xtensa_relax_info *relax_info;
bfd_byte *contents;
Elf_Internal_Rela *internal_relocs;
ebb->start_reloc_idx = i;
ebb->end_reloc_idx = i;
+ /* Precompute the opcode for each relocation. */
+ if (reloc_opcodes == NULL)
+ reloc_opcodes = build_reloc_opcodes (abfd, sec, contents,
+ internal_relocs);
+
if (!extend_ebb_bounds (ebb)
|| !compute_ebb_proposed_actions (&ebb_table)
|| !compute_ebb_actions (&ebb_table)
|| !check_section_ebb_pcrels_fit (abfd, sec, contents,
- internal_relocs, &ebb_table)
+ internal_relocs, &ebb_table,
+ reloc_opcodes)
|| !check_section_ebb_reduces (&ebb_table))
{
/* If anything goes wrong or we get unlucky and something does
release_internal_relocs (sec, internal_relocs);
if (prop_table)
free (prop_table);
+ if (reloc_opcodes)
+ free (reloc_opcodes);
return ok;
}
+/* Do not widen an instruction if it is preceeded by a
+ loop opcode. It might cause misalignment. */
+
+static bfd_boolean
+prev_instr_is_a_loop (bfd_byte *contents,
+ bfd_size_type content_length,
+ bfd_size_type offset)
+{
+ xtensa_opcode prev_opcode;
+
+ if (offset < 3)
+ return FALSE;
+ prev_opcode = insn_decode_opcode (contents, content_length, offset-3, 0);
+ return (xtensa_opcode_is_loop (xtensa_default_isa, prev_opcode) == 1);
+}
+
+
/* Find all of the possible actions for an extended basic block. */
bfd_boolean
const ebb_t *ebb = &ebb_table->ebb;
unsigned rel_idx = ebb->start_reloc_idx;
property_table_entry *entry, *start_entry, *end_entry;
+ bfd_vma offset = 0;
+ xtensa_isa isa = xtensa_default_isa;
+ xtensa_format fmt;
+ static xtensa_insnbuf insnbuf = NULL;
+ static xtensa_insnbuf slotbuf = NULL;
+
+ if (insnbuf == NULL)
+ {
+ insnbuf = xtensa_insnbuf_alloc (isa);
+ slotbuf = xtensa_insnbuf_alloc (isa);
+ }
start_entry = &ebb->ptbl[ebb->start_ptbl_idx];
end_entry = &ebb->ptbl[ebb->end_ptbl_idx];
for (entry = start_entry; entry <= end_entry; entry++)
{
- bfd_vma offset, start_offset, end_offset;
+ bfd_vma start_offset, end_offset;
bfd_size_type insn_len;
start_offset = entry->address - ebb->sec->vma;
insn_len = insn_decode_len (ebb->contents, ebb->content_length,
offset);
-
- /* Propose no actions for a section with an undecodable offset. */
if (insn_len == 0)
- {
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): could not decode instruction; possible configuration mismatch"),
- ebb->sec->owner, ebb->sec, offset);
- return FALSE;
- }
+ goto decode_error;
+
if (check_branch_target_aligned_address (offset, insn_len))
align_type = EBB_REQUIRE_TGT_ALIGN;
ebb->content_length,
irel->r_offset);
if (simplify_size == 0)
- {
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): could not decode instruction for XTENSA_ASM_SIMPLIFY relocation; possible configuration mismatch"),
- ebb->sec->owner, ebb->sec, offset);
- return FALSE;
- }
+ goto decode_error;
ebb_propose_action (ebb_table, EBB_NO_ALIGN, 0,
ta_convert_longcall, offset, 0, TRUE);
continue;
}
- insn_len = insn_decode_len (ebb->contents, ebb->content_length,
- offset);
- /* If the instruction is undecodable, then report an error. */
- if (insn_len == 0)
+ if (offset + MIN_INSN_LENGTH > ebb->content_length)
+ goto decode_error;
+ xtensa_insnbuf_from_chars (isa, insnbuf, &ebb->contents[offset],
+ ebb->content_length - offset);
+ fmt = xtensa_format_decode (isa, insnbuf);
+ if (fmt == XTENSA_UNDEFINED)
+ goto decode_error;
+ insn_len = xtensa_format_length (isa, fmt);
+ if (insn_len == (bfd_size_type) XTENSA_UNDEFINED)
+ goto decode_error;
+
+ if (xtensa_format_num_slots (isa, fmt) != 1)
{
- (*_bfd_error_handler)
- (_("%B(%A+0x%lx): could not decode instruction; possible configuration mismatch"),
- ebb->sec->owner, ebb->sec, offset);
- return FALSE;
+ offset += insn_len;
+ continue;
}
-
+
+ xtensa_format_get_slot (isa, fmt, 0, insnbuf, slotbuf);
+ opcode = xtensa_opcode_decode (isa, fmt, 0, slotbuf);
+ if (opcode == XTENSA_UNDEFINED)
+ goto decode_error;
+
if ((entry->flags & XTENSA_PROP_INSN_NO_DENSITY) == 0
&& (entry->flags & XTENSA_PROP_INSN_NO_TRANSFORM) == 0
- && narrow_instruction (ebb->contents, ebb->content_length,
- offset, FALSE))
+ && can_narrow_instruction (slotbuf, fmt, opcode) != 0)
{
/* Add an instruction narrow action. */
ebb_propose_action (ebb_table, EBB_NO_ALIGN, 0,
ta_narrow_insn, offset, 0, FALSE);
- offset += insn_len;
- continue;
}
- if ((entry->flags & XTENSA_PROP_INSN_NO_TRANSFORM) == 0
- && widen_instruction (ebb->contents, ebb->content_length,
- offset, FALSE))
+ else if ((entry->flags & XTENSA_PROP_INSN_NO_TRANSFORM) == 0
+ && can_widen_instruction (slotbuf, fmt, opcode) != 0
+ && ! prev_instr_is_a_loop (ebb->contents,
+ ebb->content_length, offset))
{
/* Add an instruction widen action. */
ebb_propose_action (ebb_table, EBB_NO_ALIGN, 0,
ta_widen_insn, offset, 0, FALSE);
- offset += insn_len;
- continue;
}
- opcode = insn_decode_opcode (ebb->contents, ebb->content_length,
- offset, 0);
- if (xtensa_opcode_is_loop (xtensa_default_isa, opcode))
+ else if (xtensa_opcode_is_loop (xtensa_default_isa, opcode) == 1)
{
/* Check for branch targets. */
ebb_propose_action (ebb_table, EBB_REQUIRE_LOOP_ALIGN, 0,
ta_none, offset, 0, TRUE);
- offset += insn_len;
- continue;
}
offset += insn_len;
}
return TRUE;
+
+ decode_error:
+ (*_bfd_error_handler)
+ (_("%B(%A+0x%lx): could not decode instruction; possible configuration mismatch"),
+ ebb->sec->owner, ebb->sec, offset);
+ return FALSE;
}
}
+/* The xlate_map is a sorted array of address mappings designed to
+ answer the offset_with_removed_text() query with a binary search instead
+ of a linear search through the section's action_list. */
+
+typedef struct xlate_map_entry xlate_map_entry_t;
+typedef struct xlate_map xlate_map_t;
+
+struct xlate_map_entry
+{
+ unsigned orig_address;
+ unsigned new_address;
+ unsigned size;
+};
+
+struct xlate_map
+{
+ unsigned entry_count;
+ xlate_map_entry_t *entry;
+};
+
+
+static int
+xlate_compare (const void *a_v, const void *b_v)
+{
+ const xlate_map_entry_t *a = (const xlate_map_entry_t *) a_v;
+ const xlate_map_entry_t *b = (const xlate_map_entry_t *) b_v;
+ if (a->orig_address < b->orig_address)
+ return -1;
+ if (a->orig_address > (b->orig_address + b->size - 1))
+ return 1;
+ return 0;
+}
+
+
+static bfd_vma
+xlate_offset_with_removed_text (const xlate_map_t *map,
+ text_action_list *action_list,
+ bfd_vma offset)
+{
+ xlate_map_entry_t tmp;
+ void *r;
+ xlate_map_entry_t *e;
+
+ if (map == NULL)
+ return offset_with_removed_text (action_list, offset);
+
+ if (map->entry_count == 0)
+ return offset;
+
+ tmp.orig_address = offset;
+ tmp.new_address = offset;
+ tmp.size = 1;
+
+ r = bsearch (&offset, map->entry, map->entry_count,
+ sizeof (xlate_map_entry_t), &xlate_compare);
+ e = (xlate_map_entry_t *) r;
+
+ BFD_ASSERT (e != NULL);
+ if (e == NULL)
+ return offset;
+ return e->new_address - e->orig_address + offset;
+}
+
+
+/* Build a binary searchable offset translation map from a section's
+ action list. */
+
+static xlate_map_t *
+build_xlate_map (asection *sec, xtensa_relax_info *relax_info)
+{
+ xlate_map_t *map = (xlate_map_t *) bfd_malloc (sizeof (xlate_map_t));
+ text_action_list *action_list = &relax_info->action_list;
+ unsigned num_actions = 0;
+ text_action *r;
+ int removed;
+ xlate_map_entry_t *current_entry;
+
+ if (map == NULL)
+ return NULL;
+
+ num_actions = action_list_count (action_list);
+ map->entry = (xlate_map_entry_t *)
+ bfd_malloc (sizeof (xlate_map_entry_t) * (num_actions + 1));
+ if (map->entry == NULL)
+ {
+ free (map);
+ return NULL;
+ }
+ map->entry_count = 0;
+
+ removed = 0;
+ current_entry = &map->entry[0];
+
+ current_entry->orig_address = 0;
+ current_entry->new_address = 0;
+ current_entry->size = 0;
+
+ for (r = action_list->head; r != NULL; r = r->next)
+ {
+ unsigned orig_size = 0;
+ switch (r->action)
+ {
+ case ta_none:
+ case ta_remove_insn:
+ case ta_convert_longcall:
+ case ta_remove_literal:
+ case ta_add_literal:
+ break;
+ case ta_remove_longcall:
+ orig_size = 6;
+ break;
+ case ta_narrow_insn:
+ orig_size = 3;
+ break;
+ case ta_widen_insn:
+ orig_size = 2;
+ break;
+ case ta_fill:
+ break;
+ }
+ current_entry->size =
+ r->offset + orig_size - current_entry->orig_address;
+ if (current_entry->size != 0)
+ {
+ current_entry++;
+ map->entry_count++;
+ }
+ current_entry->orig_address = r->offset + orig_size;
+ removed += r->removed_bytes;
+ current_entry->new_address = r->offset + orig_size - removed;
+ current_entry->size = 0;
+ }
+
+ current_entry->size = (bfd_get_section_limit (sec->owner, sec)
+ - current_entry->orig_address);
+ if (current_entry->size != 0)
+ map->entry_count++;
+
+ return map;
+}
+
+
+/* Free an offset translation map. */
+
+static void
+free_xlate_map (xlate_map_t *map)
+{
+ if (map && map->entry)
+ free (map->entry);
+ if (map)
+ free (map);
+}
+
+
/* Use check_section_ebb_pcrels_fit to make sure that all of the
relocations in a section will fit if a proposed set of actions
are performed. */
asection *sec,
bfd_byte *contents,
Elf_Internal_Rela *internal_relocs,
- const ebb_constraint *constraint)
+ const ebb_constraint *constraint,
+ const xtensa_opcode *reloc_opcodes)
{
unsigned i, j;
Elf_Internal_Rela *irel;
+ xlate_map_t *xmap = NULL;
+ bfd_boolean ok = TRUE;
xtensa_relax_info *relax_info;
relax_info = get_xtensa_relax_info (sec);
+ if (relax_info && sec->reloc_count > 100)
+ {
+ xmap = build_xlate_map (sec, relax_info);
+ /* NULL indicates out of memory, but the slow version
+ can still be used. */
+ }
+
for (i = 0; i < sec->reloc_count; i++)
{
r_reloc r_rel;
if (relax_info)
{
- self_offset = offset_with_removed_text (&relax_info->action_list,
- orig_self_offset);
- target_offset = offset_with_removed_text (&relax_info->action_list,
- orig_target_offset);
+ self_offset =
+ xlate_offset_with_removed_text (xmap, &relax_info->action_list,
+ orig_self_offset);
+ target_offset =
+ xlate_offset_with_removed_text (xmap, &relax_info->action_list,
+ orig_target_offset);
}
self_removed_bytes = 0;
xtensa_opcode opcode;
int opnum;
- opcode = get_relocation_opcode (abfd, sec, contents, irel);
+ if (reloc_opcodes)
+ opcode = reloc_opcodes[i];
+ else
+ opcode = get_relocation_opcode (abfd, sec, contents, irel);
if (opcode == XTENSA_UNDEFINED)
- return FALSE;
+ {
+ ok = FALSE;
+ break;
+ }
opnum = get_relocation_opnd (opcode, ELF32_R_TYPE (irel->r_info));
if (opnum == XTENSA_UNDEFINED)
- return FALSE;
+ {
+ ok = FALSE;
+ break;
+ }
if (!pcrel_reloc_fits (opcode, opnum, self_offset, target_offset))
- return FALSE;
+ {
+ ok = FALSE;
+ break;
+ }
}
}
- return TRUE;
+ if (xmap)
+ free_xlate_map (xmap);
+
+ return ok;
}
!= sec->output_section)
return FALSE;
+ /* Absolute literals in the same output section can always be
+ combined. */
+ if (reloc[i].is_abs_literal)
+ continue;
+
/* A literal with no PC-relative relocations can be moved anywhere. */
if (reloc[i].opnd != -1)
{
relocs_fit = check_section_ebb_pcrels_fit (target_sec->owner, target_sec,
target_sec_cache->contents,
target_sec_cache->relocs,
- &ebb_table);
+ &ebb_table, NULL);
if (!relocs_fit)
return FALSE;
copy_size = 2;
memmove (scratch, &contents[orig_dot], orig_insn_size);
BFD_ASSERT (action->removed_bytes == 1);
- rv = narrow_instruction (scratch, final_size, 0, TRUE);
+ rv = narrow_instruction (scratch, final_size, 0);
BFD_ASSERT (rv);
memmove (&dup_contents[dup_dot], scratch, copy_size);
orig_dot += orig_insn_size;
copy_size = 3;
memmove (scratch, &contents[orig_dot], orig_insn_size);
BFD_ASSERT (action->removed_bytes == -1);
- rv = widen_instruction (scratch, final_size, 0, TRUE);
+ rv = widen_instruction (scratch, final_size, 0);
BFD_ASSERT (rv);
memmove (&dup_contents[dup_dot], scratch, copy_size);
orig_dot += orig_insn_size;
asection *input_section,
Elf_Internal_Rela *rel)
{
+ struct elf_xtensa_link_hash_table *htab;
Elf_Internal_Shdr *symtab_hdr;
struct elf_link_hash_entry **sym_hashes;
unsigned long r_symndx;
struct elf_link_hash_entry *h;
bfd_boolean dynamic_symbol;
+ htab = elf_xtensa_hash_table (info);
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (abfd);
else
h = sym_hashes[r_symndx - symtab_hdr->sh_info];
- dynamic_symbol = xtensa_elf_dynamic_symbol_p (h, info);
+ dynamic_symbol = elf_xtensa_dynamic_symbol_p (h, info);
if ((r_type == R_XTENSA_32 || r_type == R_XTENSA_PLT)
&& (input_section->flags & SEC_ALLOC) != 0
&& (dynamic_symbol || info->shared))
{
- bfd *dynobj;
- const char *srel_name;
asection *srel;
bfd_boolean is_plt = FALSE;
- dynobj = elf_hash_table (info)->dynobj;
- BFD_ASSERT (dynobj != NULL);
-
if (dynamic_symbol && r_type == R_XTENSA_PLT)
{
- srel_name = ".rela.plt";
+ srel = htab->srelplt;
is_plt = TRUE;
}
else
- srel_name = ".rela.got";
+ srel = htab->srelgot;
/* Reduce size of the .rela.* section by one reloc. */
- srel = bfd_get_section_by_name (dynobj, srel_name);
BFD_ASSERT (srel != NULL);
BFD_ASSERT (srel->size >= sizeof (Elf32_External_Rela));
srel->size -= sizeof (Elf32_External_Rela);
reloc_index = srel->size / sizeof (Elf32_External_Rela);
chunk = reloc_index / PLT_ENTRIES_PER_CHUNK;
- splt = elf_xtensa_get_plt_section (dynobj, chunk);
- sgotplt = elf_xtensa_get_gotplt_section (dynobj, chunk);
+ splt = elf_xtensa_get_plt_section (info, chunk);
+ sgotplt = elf_xtensa_get_gotplt_section (info, chunk);
BFD_ASSERT (splt != NULL && sgotplt != NULL);
/* Check if an entire PLT chunk has just been eliminated. */
if (reloc_index % PLT_ENTRIES_PER_CHUNK == 0)
{
/* The two magic GOT entries for that chunk can go away. */
- srelgot = bfd_get_section_by_name (dynobj, ".rela.got");
+ srelgot = htab->srelgot;
BFD_ASSERT (srelgot != NULL);
srelgot->reloc_count -= 2;
srelgot->size -= 2 * sizeof (Elf32_External_Rela);
}
is_full_prop_section =
- ((strcmp (sec->name, XTENSA_PROP_SEC_NAME) == 0)
- || (strncmp (sec->name, ".gnu.linkonce.prop.",
- sizeof ".gnu.linkonce.prop." - 1) == 0));
+ ( CONST_STRNEQ (sec->name, XTENSA_PROP_SEC_NAME)
+ || CONST_STRNEQ (sec->name, ".gnu.linkonce.prop."));
if (internal_relocs)
{
if (xtensa_is_littable_section (sec))
{
- bfd *dynobj = elf_hash_table (link_info)->dynobj;
- if (dynobj)
- {
- asection *sgotloc =
- bfd_get_section_by_name (dynobj, ".got.loc");
- if (sgotloc)
- sgotloc->size -= removed_bytes;
- }
+ asection *sgotloc = elf_xtensa_hash_table (link_info)->sgotloc;
+ if (sgotloc)
+ sgotloc->size -= removed_bytes;
}
}
}
/* Miscellaneous utility functions.... */
static asection *
-elf_xtensa_get_plt_section (bfd *dynobj, int chunk)
+elf_xtensa_get_plt_section (struct bfd_link_info *info, int chunk)
{
+ struct elf_xtensa_link_hash_table *htab;
+ bfd *dynobj;
char plt_name[10];
if (chunk == 0)
- return bfd_get_section_by_name (dynobj, ".plt");
+ {
+ htab = elf_xtensa_hash_table (info);
+ return htab->splt;
+ }
+ dynobj = elf_hash_table (info)->dynobj;
sprintf (plt_name, ".plt.%u", chunk);
return bfd_get_section_by_name (dynobj, plt_name);
}
static asection *
-elf_xtensa_get_gotplt_section (bfd *dynobj, int chunk)
+elf_xtensa_get_gotplt_section (struct bfd_link_info *info, int chunk)
{
+ struct elf_xtensa_link_hash_table *htab;
+ bfd *dynobj;
char got_name[14];
if (chunk == 0)
- return bfd_get_section_by_name (dynobj, ".got.plt");
+ {
+ htab = elf_xtensa_hash_table (info);
+ return htab->sgotplt;
+ }
+ dynobj = elf_hash_table (info)->dynobj;
sprintf (got_name, ".got.plt.%u", chunk);
return bfd_get_section_by_name (dynobj, got_name);
}
static int linkonce_len = sizeof (".gnu.linkonce.") - 1;
-static int insn_sec_len = sizeof (XTENSA_INSN_SEC_NAME) - 1;
-static int lit_sec_len = sizeof (XTENSA_LIT_SEC_NAME) - 1;
-static int prop_sec_len = sizeof (XTENSA_PROP_SEC_NAME) - 1;
-
static bfd_boolean
xtensa_is_property_section (asection *sec)
{
- if (strncmp (XTENSA_INSN_SEC_NAME, sec->name, insn_sec_len) == 0
- || strncmp (XTENSA_LIT_SEC_NAME, sec->name, lit_sec_len) == 0
- || strncmp (XTENSA_PROP_SEC_NAME, sec->name, prop_sec_len) == 0)
+ if (CONST_STRNEQ (sec->name, XTENSA_INSN_SEC_NAME)
+ || CONST_STRNEQ (sec->name, XTENSA_LIT_SEC_NAME)
+ || CONST_STRNEQ (sec->name, XTENSA_PROP_SEC_NAME))
return TRUE;
if (strncmp (".gnu.linkonce.", sec->name, linkonce_len) == 0
- && (strncmp (&sec->name[linkonce_len], "x.", 2) == 0
- || strncmp (&sec->name[linkonce_len], "p.", 2) == 0
- || strncmp (&sec->name[linkonce_len], "prop.", 5) == 0))
+ && (CONST_STRNEQ (&sec->name[linkonce_len], "x.")
+ || CONST_STRNEQ (&sec->name[linkonce_len], "p.")
+ || CONST_STRNEQ (&sec->name[linkonce_len], "prop.")))
return TRUE;
return FALSE;
static bfd_boolean
xtensa_is_littable_section (asection *sec)
{
- if (strncmp (XTENSA_LIT_SEC_NAME, sec->name, lit_sec_len) == 0)
+ if (CONST_STRNEQ (sec->name, XTENSA_LIT_SEC_NAME))
return TRUE;
if (strncmp (".gnu.linkonce.", sec->name, linkonce_len) == 0
}
-char *
-xtensa_get_property_section_name (asection *sec, const char *base_name)
+/* Predicate function used to look up a section in a particular group. */
+
+static bfd_boolean
+match_section_group (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, void *inf)
+{
+ const char *gname = inf;
+ const char *group_name = elf_group_name (sec);
+
+ return (group_name == gname
+ || (group_name != NULL
+ && gname != NULL
+ && strcmp (group_name, gname) == 0));
+}
+
+
+asection *
+xtensa_get_property_section (asection *sec, const char *base_name)
{
- if (strncmp (sec->name, ".gnu.linkonce.", linkonce_len) == 0)
+ const char *suffix, *group_name;
+ char *prop_sec_name;
+ asection *prop_sec;
+
+ group_name = elf_group_name (sec);
+ if (group_name)
+ {
+ suffix = strrchr (sec->name, '.');
+ if (suffix == sec->name)
+ suffix = 0;
+ prop_sec_name = (char *) bfd_malloc (strlen (base_name) + 1
+ + (suffix ? strlen (suffix) : 0));
+ strcpy (prop_sec_name, base_name);
+ if (suffix)
+ strcat (prop_sec_name, suffix);
+ }
+ else if (strncmp (sec->name, ".gnu.linkonce.", linkonce_len) == 0)
{
- char *prop_sec_name;
- const char *suffix;
char *linkonce_kind = 0;
if (strcmp (base_name, XTENSA_INSN_SEC_NAME) == 0)
suffix = sec->name + linkonce_len;
/* For backward compatibility, replace "t." instead of inserting
the new linkonce_kind (but not for "prop" sections). */
- if (strncmp (suffix, "t.", 2) == 0 && linkonce_kind[1] == '.')
+ if (CONST_STRNEQ (suffix, "t.") && linkonce_kind[1] == '.')
suffix += 2;
strcat (prop_sec_name + linkonce_len, suffix);
+ }
+ else
+ prop_sec_name = strdup (base_name);
+
+ /* Check if the section already exists. */
+ prop_sec = bfd_get_section_by_name_if (sec->owner, prop_sec_name,
+ match_section_group,
+ (void *) group_name);
+ /* If not, create it. */
+ if (! prop_sec)
+ {
+ flagword flags = (SEC_RELOC | SEC_HAS_CONTENTS | SEC_READONLY);
+ flags |= (bfd_get_section_flags (sec->owner, sec)
+ & (SEC_LINK_ONCE | SEC_LINK_DUPLICATES));
+
+ prop_sec = bfd_make_section_anyway_with_flags
+ (sec->owner, strdup (prop_sec_name), flags);
+ if (! prop_sec)
+ return 0;
- return prop_sec_name;
+ elf_group_name (prop_sec) = group_name;
}
- return strdup (base_name);
+ free (prop_sec_name);
+ return prop_sec;
}
flagword
xtensa_get_property_predef_flags (asection *sec)
{
- if (strcmp (sec->name, XTENSA_INSN_SEC_NAME) == 0
- || strncmp (sec->name, ".gnu.linkonce.x.",
- sizeof ".gnu.linkonce.x." - 1) == 0)
+ if (CONST_STRNEQ (sec->name, XTENSA_INSN_SEC_NAME)
+ || CONST_STRNEQ (sec->name, ".gnu.linkonce.x."))
return (XTENSA_PROP_INSN
| XTENSA_PROP_INSN_NO_TRANSFORM
| XTENSA_PROP_INSN_NO_REORDER);
/* ".plt*" sections have no explicit relocations but they contain L32R
instructions that reference the corresponding ".got.plt*" sections. */
if ((sec->flags & SEC_LINKER_CREATED) != 0
- && strncmp (sec->name, ".plt", 4) == 0)
+ && CONST_STRNEQ (sec->name, ".plt"))
{
asection *sgotplt;
module loader so that the literals are not placed after the text. */
static const struct bfd_elf_special_section elf_xtensa_special_sections[] =
{
- { ".fini.literal", 13, 0, SHT_PROGBITS, SHF_ALLOC + SHF_EXECINSTR },
- { ".init.literal", 13, 0, SHT_PROGBITS, SHF_ALLOC + SHF_EXECINSTR },
- { ".literal", 8, 0, SHT_PROGBITS, SHF_ALLOC + SHF_EXECINSTR },
- { NULL, 0, 0, 0, 0 }
+ { STRING_COMMA_LEN (".fini.literal"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_EXECINSTR },
+ { STRING_COMMA_LEN (".init.literal"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_EXECINSTR },
+ { STRING_COMMA_LEN (".literal"), 0, SHT_PROGBITS, SHF_ALLOC + SHF_EXECINSTR },
+ { STRING_COMMA_LEN (".xtensa.info"), 0, SHT_NOTE, 0 },
+ { NULL, 0, 0, 0, 0 }
};
\f
#ifndef ELF_ARCH
#define TARGET_BIG_NAME "elf32-xtensa-be"
#define ELF_ARCH bfd_arch_xtensa
-/* The new EM_XTENSA value will be recognized beginning in the Xtensa T1040
- release. However, we still have to generate files with the EM_XTENSA_OLD
- value so that pre-T1040 tools can read the files. As soon as we stop
- caring about pre-T1040 tools, the following two values should be
- swapped. At the same time, any other code that uses EM_XTENSA_OLD
- should be changed to use EM_XTENSA. */
-#define ELF_MACHINE_CODE EM_XTENSA_OLD
-#define ELF_MACHINE_ALT1 EM_XTENSA
+#define ELF_MACHINE_CODE EM_XTENSA
+#define ELF_MACHINE_ALT1 EM_XTENSA_OLD
#if XCHAL_HAVE_MMU
#define ELF_MAXPAGESIZE (1 << XCHAL_MMU_MIN_PTE_PAGE_SIZE)
#define bfd_elf32_bfd_relax_section elf_xtensa_relax_section
#define bfd_elf32_bfd_reloc_type_lookup elf_xtensa_reloc_type_lookup
#define bfd_elf32_bfd_set_private_flags elf_xtensa_set_private_flags
+#define bfd_elf32_bfd_link_hash_table_create elf_xtensa_link_hash_table_create
#define elf_backend_adjust_dynamic_symbol elf_xtensa_adjust_dynamic_symbol
#define elf_backend_check_relocs elf_xtensa_check_relocs
#define elf_backend_gc_sweep_hook elf_xtensa_gc_sweep_hook
#define elf_backend_grok_prstatus elf_xtensa_grok_prstatus
#define elf_backend_grok_psinfo elf_xtensa_grok_psinfo
-#define elf_backend_hide_symbol elf_xtensa_hide_symbol
-#define elf_backend_modify_segment_map elf_xtensa_modify_segment_map
#define elf_backend_object_p elf_xtensa_object_p
#define elf_backend_reloc_type_class elf_xtensa_reloc_type_class
#define elf_backend_relocate_section elf_xtensa_relocate_section
#define elf_backend_size_dynamic_sections elf_xtensa_size_dynamic_sections
+#define elf_backend_omit_section_dynsym \
+ ((bfd_boolean (*) (bfd *, struct bfd_link_info *, asection *)) bfd_true)
#define elf_backend_special_sections elf_xtensa_special_sections
+#define elf_backend_action_discarded elf_xtensa_action_discarded
#include "elf32-target.h"