return (asect->reloc_count + 1) * sizeof (arelent *);
}
+/* In addition to the need to byte-swap the symbol number, the bit positions
+ of the fields in the relocation information vary per target endian-ness. */
+
+static void
+bfd_mach_o_swap_in_non_scattered_reloc (bfd *abfd, bfd_mach_o_reloc_info *rel,
+ unsigned char *fields)
+{
+ unsigned char info = fields[3];
+
+ if (bfd_big_endian (abfd))
+ {
+ rel->r_value = (fields[0] << 16) | (fields[1] << 8) | fields[2];
+ rel->r_type = (info >> BFD_MACH_O_BE_TYPE_SHIFT) & BFD_MACH_O_TYPE_MASK;
+ rel->r_pcrel = (info & BFD_MACH_O_BE_PCREL) ? 1 : 0;
+ rel->r_length = (info >> BFD_MACH_O_BE_LENGTH_SHIFT)
+ & BFD_MACH_O_LENGTH_MASK;
+ rel->r_extern = (info & BFD_MACH_O_BE_EXTERN) ? 1 : 0;
+ }
+ else
+ {
+ rel->r_value = (fields[2] << 16) | (fields[1] << 8) | fields[0];
+ rel->r_type = (info >> BFD_MACH_O_LE_TYPE_SHIFT) & BFD_MACH_O_TYPE_MASK;
+ rel->r_pcrel = (info & BFD_MACH_O_LE_PCREL) ? 1 : 0;
+ rel->r_length = (info >> BFD_MACH_O_LE_LENGTH_SHIFT)
+ & BFD_MACH_O_LENGTH_MASK;
+ rel->r_extern = (info & BFD_MACH_O_LE_EXTERN) ? 1 : 0;
+ }
+}
+
static int
bfd_mach_o_canonicalize_one_reloc (bfd *abfd,
struct mach_o_reloc_info_external *raw,
bfd_mach_o_backend_data *bed = bfd_mach_o_get_backend_data (abfd);
bfd_mach_o_reloc_info reloc;
bfd_vma addr;
- bfd_vma symnum;
asymbol **sym;
addr = bfd_get_32 (abfd, raw->r_address);
- symnum = bfd_get_32 (abfd, raw->r_symbolnum);
+ res->sym_ptr_ptr = NULL;
+ res->addend = 0;
if (addr & BFD_MACH_O_SR_SCATTERED)
{
unsigned int j;
+ bfd_vma symnum = bfd_get_32 (abfd, raw->r_symbolnum);
- /* Scattered relocation.
- Extract section and offset from r_value. */
- res->sym_ptr_ptr = NULL;
- res->addend = 0;
+ /* Scattered relocation, can't be extern. */
+ reloc.r_scattered = 1;
+ reloc.r_extern = 0;
+
+ /* Extract section and offset from r_value (symnum). */
+ reloc.r_value = symnum;
+ /* FIXME: This breaks when a symbol in a reloc exactly follows the
+ end of the data for the section (e.g. in a calculation of section
+ data length). At present, the symbol will end up associated with
+ the following section or, if it falls within alignment padding, as
+ null - which will assert later. */
for (j = 0; j < mdata->nsects; j++)
{
bfd_mach_o_section *sect = mdata->sections[j];
break;
}
}
- res->address = BFD_MACH_O_GET_SR_ADDRESS (addr);
+
+ /* Extract the info and address fields from r_address. */
reloc.r_type = BFD_MACH_O_GET_SR_TYPE (addr);
reloc.r_length = BFD_MACH_O_GET_SR_LENGTH (addr);
reloc.r_pcrel = addr & BFD_MACH_O_SR_PCREL;
- reloc.r_scattered = 1;
+ reloc.r_address = BFD_MACH_O_GET_SR_TYPE (addr);
+ res->address = BFD_MACH_O_GET_SR_ADDRESS (addr);
}
else
{
- unsigned int num = BFD_MACH_O_GET_R_SYMBOLNUM (symnum);
- res->addend = 0;
- res->address = addr;
- if (symnum & BFD_MACH_O_R_EXTERN)
- {
+ unsigned int num;
+
+ /* Non-scattered relocation. */
+ reloc.r_scattered = 0;
+
+ /* The value and info fields have to be extracted dependent on target
+ endian-ness. */
+ bfd_mach_o_swap_in_non_scattered_reloc (abfd, &reloc, raw->r_symbolnum);
+ num = reloc.r_value;
+
+ if (reloc.r_extern)
sym = syms + num;
- reloc.r_extern = 1;
- }
- else
+ else if (reloc.r_scattered
+ || (reloc.r_type != BFD_MACH_O_GENERIC_RELOC_PAIR))
{
BFD_ASSERT (num != 0);
BFD_ASSERT (num <= mdata->nsects);
sym = mdata->sections[num - 1]->bfdsection->symbol_ptr_ptr;
/* For a symbol defined in section S, the addend (stored in the
binary) contains the address of the section. To comply with
- bfd conventio, substract the section address.
+ bfd convention, subtract the section address.
Use the address from the header, so that the user can modify
the vma of the section. */
res->addend = -mdata->sections[num - 1]->addr;
- reloc.r_extern = 0;
+ }
+ else /* ... The 'symnum' in a non-scattered PAIR will be 0x00ffffff. */
+ {
+ /* Pairs for PPC LO/HI/HA are not scattered, but contain the offset
+ in the lower 16bits of the address value. So we have to find the
+ 'symbol' from the preceding reloc. We do this even thoough the
+ section symbol is probably not needed here, because NULL symbol
+ values cause an assert in generic BFD code. */
+ sym = (res - 1)->sym_ptr_ptr;
}
res->sym_ptr_ptr = sym;
- reloc.r_type = BFD_MACH_O_GET_R_TYPE (symnum);
- reloc.r_length = BFD_MACH_O_GET_R_LENGTH (symnum);
- reloc.r_pcrel = (symnum & BFD_MACH_O_R_PCREL) ? 1 : 0;
- reloc.r_scattered = 0;
+
+ /* The 'address' is just r_address.
+ ??? maybe this should be masked with 0xffffff for safety. */
+ res->address = addr;
+ reloc.r_address = addr;
}
+ /* We have set up a reloc with all the information present, so the swapper can
+ modify address, value and addend fields, if necessary, to convey information
+ in the generic BFD reloc that is mach-o specific. */
+
if (!(*bed->_bfd_mach_o_swap_reloc_in)(res, &reloc))
return -1;
return 0;
return i;
}
+/* In addition to the need to byte-swap the symbol number, the bit positions
+ of the fields in the relocation information vary per target endian-ness. */
+
+static void
+bfd_mach_o_swap_out_non_scattered_reloc (bfd *abfd, unsigned char *fields,
+ bfd_mach_o_reloc_info *rel)
+{
+ unsigned char info = 0;
+
+ BFD_ASSERT (rel->r_type <= 15);
+ BFD_ASSERT (rel->r_length <= 3);
+
+ if (bfd_big_endian (abfd))
+ {
+ fields[0] = (rel->r_value >> 16) & 0xff;
+ fields[1] = (rel->r_value >> 8) & 0xff;
+ fields[2] = rel->r_value & 0xff;
+ info |= rel->r_type << BFD_MACH_O_BE_TYPE_SHIFT;
+ info |= rel->r_pcrel ? BFD_MACH_O_BE_PCREL : 0;
+ info |= rel->r_length << BFD_MACH_O_BE_LENGTH_SHIFT;
+ info |= rel->r_extern ? BFD_MACH_O_BE_EXTERN : 0;
+ }
+ else
+ {
+ fields[2] = (rel->r_value >> 16) & 0xff;
+ fields[1] = (rel->r_value >> 8) & 0xff;
+ fields[0] = rel->r_value & 0xff;
+ info |= rel->r_type << BFD_MACH_O_LE_TYPE_SHIFT;
+ info |= rel->r_pcrel ? BFD_MACH_O_LE_PCREL : 0;
+ info |= rel->r_length << BFD_MACH_O_LE_LENGTH_SHIFT;
+ info |= rel->r_extern ? BFD_MACH_O_LE_EXTERN : 0;
+ }
+ fields[3] = info;
+}
+
static bfd_boolean
bfd_mach_o_write_relocs (bfd *abfd, bfd_mach_o_section *section)
{
}
else
{
- unsigned long v;
-
bfd_put_32 (abfd, pinfo->r_address, raw.r_address);
- v = BFD_MACH_O_SET_R_SYMBOLNUM (pinfo->r_value)
- | (pinfo->r_pcrel ? BFD_MACH_O_R_PCREL : 0)
- | BFD_MACH_O_SET_R_LENGTH (pinfo->r_length)
- | (pinfo->r_extern ? BFD_MACH_O_R_EXTERN : 0)
- | BFD_MACH_O_SET_R_TYPE (pinfo->r_type);
- bfd_put_32 (abfd, v, raw.r_symbolnum);
+ bfd_mach_o_swap_out_non_scattered_reloc (abfd, raw.r_symbolnum,
+ pinfo);
}
if (bfd_bwrite (&raw, BFD_MACH_O_RELENT_SIZE, abfd)
projects / deliverable / binutils-gdb.git / blobdiff