return (asect->reloc_count + 1) * sizeof (arelent *);
}
+/* In addition to the need to byte-swap the symbol number, the bit positions
+ of the fields in the relocation information vary per target endian-ness. */
+
+static void
+bfd_mach_o_swap_in_non_scattered_reloc (bfd *abfd, bfd_mach_o_reloc_info *rel,
+ unsigned char *fields)
+{
+ unsigned char info = fields[3];
+
+ if (bfd_big_endian (abfd))
+ {
+ rel->r_value = (fields[0] << 16) | (fields[1] << 8) | fields[2];
+ rel->r_type = (info >> BFD_MACH_O_BE_TYPE_SHIFT) & BFD_MACH_O_TYPE_MASK;
+ rel->r_pcrel = (info & BFD_MACH_O_BE_PCREL) ? 1 : 0;
+ rel->r_length = (info >> BFD_MACH_O_BE_LENGTH_SHIFT)
+ & BFD_MACH_O_LENGTH_MASK;
+ rel->r_extern = (info & BFD_MACH_O_BE_EXTERN) ? 1 : 0;
+ }
+ else
+ {
+ rel->r_value = (fields[2] << 16) | (fields[1] << 8) | fields[0];
+ rel->r_type = (info >> BFD_MACH_O_LE_TYPE_SHIFT) & BFD_MACH_O_TYPE_MASK;
+ rel->r_pcrel = (info & BFD_MACH_O_LE_PCREL) ? 1 : 0;
+ rel->r_length = (info >> BFD_MACH_O_LE_LENGTH_SHIFT)
+ & BFD_MACH_O_LENGTH_MASK;
+ rel->r_extern = (info & BFD_MACH_O_LE_EXTERN) ? 1 : 0;
+ }
+}
+
static int
bfd_mach_o_canonicalize_one_reloc (bfd *abfd,
struct mach_o_reloc_info_external *raw,
bfd_mach_o_backend_data *bed = bfd_mach_o_get_backend_data (abfd);
bfd_mach_o_reloc_info reloc;
bfd_vma addr;
- bfd_vma symnum;
asymbol **sym;
addr = bfd_get_32 (abfd, raw->r_address);
- symnum = bfd_get_32 (abfd, raw->r_symbolnum);
-
+ res->sym_ptr_ptr = NULL;
+ res->addend = 0;
+
if (addr & BFD_MACH_O_SR_SCATTERED)
{
unsigned int j;
+ bfd_vma symnum = bfd_get_32 (abfd, raw->r_symbolnum);
- /* Scattered relocation.
- Extract section and offset from r_value. */
- res->sym_ptr_ptr = NULL;
- res->addend = 0;
+ /* Scattered relocation, can't be extern. */
+ reloc.r_scattered = 1;
+ reloc.r_extern = 0;
+
+ /* Extract section and offset from r_value (symnum). */
+ reloc.r_value = symnum;
+ /* FIXME: This breaks when a symbol in a reloc exactly follows the
+ end of the data for the section (e.g. in a calculation of section
+ data length). At present, the symbol will end up associated with
+ the following section or, if it falls within alignment padding, as
+ null - which will assert later. */
for (j = 0; j < mdata->nsects; j++)
{
bfd_mach_o_section *sect = mdata->sections[j];
break;
}
}
- res->address = BFD_MACH_O_GET_SR_ADDRESS (addr);
+
+ /* Extract the info and address fields from r_address. */
reloc.r_type = BFD_MACH_O_GET_SR_TYPE (addr);
reloc.r_length = BFD_MACH_O_GET_SR_LENGTH (addr);
reloc.r_pcrel = addr & BFD_MACH_O_SR_PCREL;
- reloc.r_scattered = 1;
+ reloc.r_address = BFD_MACH_O_GET_SR_TYPE (addr);
+ res->address = BFD_MACH_O_GET_SR_ADDRESS (addr);
}
else
{
- unsigned int num = BFD_MACH_O_GET_R_SYMBOLNUM (symnum);
- res->addend = 0;
- res->address = addr;
- if (symnum & BFD_MACH_O_R_EXTERN)
- {
- sym = syms + num;
- reloc.r_extern = 1;
- }
+ unsigned int num;
+
+ /* Non-scattered relocation. */
+ reloc.r_scattered = 0;
+
+ /* The value and info fields have to be extracted dependent on target
+ endian-ness. */
+ bfd_mach_o_swap_in_non_scattered_reloc (abfd, &reloc, raw->r_symbolnum);
+ num = reloc.r_value;
+
+ if (reloc.r_extern)
+ {
+ /* An external symbol number. */
+ sym = syms + num;
+ }
+ else if (num == 0x00ffffff)
+ {
+ /* The 'symnum' in a non-scattered PAIR is 0x00ffffff. But as this
+ is generic code, we don't know wether this is really a PAIR.
+ This value is almost certainly not a valid section number, hence
+ this specific case to avoid an assertion failure.
+ Target specific swap_reloc_in routine should adjust that. */
+ sym = bfd_abs_section_ptr->symbol_ptr_ptr;
+ }
else
{
+ /* A section number. */
BFD_ASSERT (num != 0);
BFD_ASSERT (num <= mdata->nsects);
+
sym = mdata->sections[num - 1]->bfdsection->symbol_ptr_ptr;
/* For a symbol defined in section S, the addend (stored in the
binary) contains the address of the section. To comply with
- bfd conventio, substract the section address.
+ bfd convention, subtract the section address.
Use the address from the header, so that the user can modify
the vma of the section. */
res->addend = -mdata->sections[num - 1]->addr;
- reloc.r_extern = 0;
}
+ /* Note: Pairs for PPC LO/HI/HA are not scattered, but contain the offset
+ in the lower 16bits of the address value. So we have to find the
+ 'symbol' from the preceding reloc. We do this even though the
+ section symbol is probably not needed here, because NULL symbol
+ values cause an assert in generic BFD code. This must be done in
+ the PPC swap_reloc_in routine. */
res->sym_ptr_ptr = sym;
- reloc.r_type = BFD_MACH_O_GET_R_TYPE (symnum);
- reloc.r_length = BFD_MACH_O_GET_R_LENGTH (symnum);
- reloc.r_pcrel = (symnum & BFD_MACH_O_R_PCREL) ? 1 : 0;
- reloc.r_scattered = 0;
+
+ /* The 'address' is just r_address.
+ ??? maybe this should be masked with 0xffffff for safety. */
+ res->address = addr;
+ reloc.r_address = addr;
}
-
+
+ /* We have set up a reloc with all the information present, so the swapper
+ can modify address, value and addend fields, if necessary, to convey
+ information in the generic BFD reloc that is mach-o specific. */
+
if (!(*bed->_bfd_mach_o_swap_reloc_in)(res, &reloc))
return -1;
return 0;
return i;
}
+/* In addition to the need to byte-swap the symbol number, the bit positions
+ of the fields in the relocation information vary per target endian-ness. */
+
+static void
+bfd_mach_o_swap_out_non_scattered_reloc (bfd *abfd, unsigned char *fields,
+ bfd_mach_o_reloc_info *rel)
+{
+ unsigned char info = 0;
+
+ BFD_ASSERT (rel->r_type <= 15);
+ BFD_ASSERT (rel->r_length <= 3);
+
+ if (bfd_big_endian (abfd))
+ {
+ fields[0] = (rel->r_value >> 16) & 0xff;
+ fields[1] = (rel->r_value >> 8) & 0xff;
+ fields[2] = rel->r_value & 0xff;
+ info |= rel->r_type << BFD_MACH_O_BE_TYPE_SHIFT;
+ info |= rel->r_pcrel ? BFD_MACH_O_BE_PCREL : 0;
+ info |= rel->r_length << BFD_MACH_O_BE_LENGTH_SHIFT;
+ info |= rel->r_extern ? BFD_MACH_O_BE_EXTERN : 0;
+ }
+ else
+ {
+ fields[2] = (rel->r_value >> 16) & 0xff;
+ fields[1] = (rel->r_value >> 8) & 0xff;
+ fields[0] = rel->r_value & 0xff;
+ info |= rel->r_type << BFD_MACH_O_LE_TYPE_SHIFT;
+ info |= rel->r_pcrel ? BFD_MACH_O_LE_PCREL : 0;
+ info |= rel->r_length << BFD_MACH_O_LE_LENGTH_SHIFT;
+ info |= rel->r_extern ? BFD_MACH_O_LE_EXTERN : 0;
+ }
+ fields[3] = info;
+}
+
static bfd_boolean
bfd_mach_o_write_relocs (bfd *abfd, bfd_mach_o_section *section)
{
}
else
{
- unsigned long v;
-
bfd_put_32 (abfd, pinfo->r_address, raw.r_address);
- v = BFD_MACH_O_SET_R_SYMBOLNUM (pinfo->r_value)
- | (pinfo->r_pcrel ? BFD_MACH_O_R_PCREL : 0)
- | BFD_MACH_O_SET_R_LENGTH (pinfo->r_length)
- | (pinfo->r_extern ? BFD_MACH_O_R_EXTERN : 0)
- | BFD_MACH_O_SET_R_TYPE (pinfo->r_type);
- bfd_put_32 (abfd, v, raw.r_symbolnum);
+ bfd_mach_o_swap_out_non_scattered_reloc (abfd, raw.r_symbolnum,
+ pinfo);
}
if (bfd_bwrite (&raw, BFD_MACH_O_RELENT_SIZE, abfd)
seg->sect_head = NULL;
seg->sect_tail = NULL;
- /* Append sections to the segment. */
+ /* Append sections to the segment.
+
+ This is a little tedious, we have to honor the need to account zerofill
+ sections after all the rest. This forces us to do the calculation of
+ total vmsize in three passes so that any alignment increments are
+ properly accounted. */
for (i = 0; i < mdata->nsects; ++i)
{
&& strncmp (segment, s->segname, BFD_MACH_O_SEGNAME_SIZE) != 0)
continue;
+ /* Although we account for zerofill section sizes in vm order, they are
+ placed in the file in source sequence. */
bfd_mach_o_append_section_to_segment (seg, sec);
-
s->offset = 0;
- if (s->size > 0)
- {
- seg->vmsize = FILE_ALIGN (seg->vmsize, s->align);
- seg->vmsize += s->size;
- }
/* Zerofill sections have zero file size & offset,
and are not written. */
if (s->size > 0)
{
+ seg->vmsize = FILE_ALIGN (seg->vmsize, s->align);
+ seg->vmsize += s->size;
+
+ seg->filesize = FILE_ALIGN (seg->filesize, s->align);
+ seg->filesize += s->size;
+
mdata->filelen = FILE_ALIGN (mdata->filelen, s->align);
s->offset = mdata->filelen;
}
sec->filepos = s->offset;
-
mdata->filelen += s->size;
}
- seg->filesize = mdata->filelen - seg->fileoff;
- seg->filesize = FILE_ALIGN(seg->filesize, 2);
+ /* Now pass through again, for zerofill, only now we just update the vmsize. */
+ for (i = 0; i < mdata->nsects; ++i)
+ {
+ bfd_mach_o_section *s = mdata->sections[i];
+
+ if ((s->flags & BFD_MACH_O_SECTION_TYPE_MASK) != BFD_MACH_O_S_ZEROFILL)
+ continue;
+
+ if (! is_mho
+ && strncmp (segment, s->segname, BFD_MACH_O_SEGNAME_SIZE) != 0)
+ continue;
+
+ if (s->size > 0)
+ {
+ seg->vmsize = FILE_ALIGN (seg->vmsize, s->align);
+ seg->vmsize += s->size;
+ }
+ }
+
+ /* Now pass through again, for zerofill_GB. */
+ for (i = 0; i < mdata->nsects; ++i)
+ {
+ bfd_mach_o_section *s = mdata->sections[i];
+
+ if ((s->flags & BFD_MACH_O_SECTION_TYPE_MASK) != BFD_MACH_O_S_GB_ZEROFILL)
+ continue;
+
+ if (! is_mho
+ && strncmp (segment, s->segname, BFD_MACH_O_SEGNAME_SIZE) != 0)
+ continue;
+
+ if (s->size > 0)
+ {
+ seg->vmsize = FILE_ALIGN (seg->vmsize, s->align);
+ seg->vmsize += s->size;
+ }
+ }
- /* Allocate relocation room. */
+ /* Allocate space for the relocations. */
mdata->filelen = FILE_ALIGN(mdata->filelen, 2);
for (i = 0; i < mdata->nsects; ++i)
return TRUE;
}
+static bfd_boolean
+bfd_mach_o_read_main (bfd *abfd, bfd_mach_o_load_command *command)
+{
+ bfd_mach_o_main_command *cmd = &command->command.main;
+ struct mach_o_entry_point_command_external raw;
+
+ if (bfd_seek (abfd, command->offset + BFD_MACH_O_LC_SIZE, SEEK_SET) != 0
+ || bfd_bread (&raw, sizeof (raw), abfd) != sizeof (raw))
+ return FALSE;
+
+ cmd->entryoff = bfd_get_64 (abfd, raw.entryoff);
+ cmd->stacksize = bfd_get_64 (abfd, raw.stacksize);
+ return TRUE;
+}
+
+static bfd_boolean
+bfd_mach_o_read_source_version (bfd *abfd, bfd_mach_o_load_command *command)
+{
+ bfd_mach_o_source_version_command *cmd = &command->command.source_version;
+ struct mach_o_source_version_command_external raw;
+ bfd_uint64_t ver;
+
+ if (bfd_seek (abfd, command->offset + BFD_MACH_O_LC_SIZE, SEEK_SET) != 0
+ || bfd_bread (&raw, sizeof (raw), abfd) != sizeof (raw))
+ return FALSE;
+
+ ver = bfd_get_64 (abfd, raw.version);
+ /* Note: we use a serie of shift to avoid shift > 32 (for which gcc
+ generates warnings) in case of the host doesn't support 64 bit
+ integers. */
+ cmd->e = ver & 0x3ff;
+ ver >>= 10;
+ cmd->d = ver & 0x3ff;
+ ver >>= 10;
+ cmd->c = ver & 0x3ff;
+ ver >>= 10;
+ cmd->b = ver & 0x3ff;
+ ver >>= 10;
+ cmd->a = ver & 0xffffff;
+ return TRUE;
+}
+
static int
bfd_mach_o_read_segment (bfd *abfd,
bfd_mach_o_load_command *command,
case BFD_MACH_O_LC_CODE_SIGNATURE:
case BFD_MACH_O_LC_SEGMENT_SPLIT_INFO:
case BFD_MACH_O_LC_FUNCTION_STARTS:
+ case BFD_MACH_O_LC_DATA_IN_CODE:
+ case BFD_MACH_O_LC_DYLIB_CODE_SIGN_DRS:
if (bfd_mach_o_read_linkedit (abfd, command) != 0)
return -1;
break;
if (!bfd_mach_o_read_version_min (abfd, command))
return -1;
break;
+ case BFD_MACH_O_LC_MAIN:
+ if (!bfd_mach_o_read_main (abfd, command))
+ return -1;
+ break;
+ case BFD_MACH_O_LC_SOURCE_VERSION:
+ if (!bfd_mach_o_read_source_version (abfd, command))
+ return -1;
+ break;
default:
(*_bfd_error_handler)(_("%B: unknown load command 0x%lx"),
abfd, (unsigned long) command->type);
abfd->filename = name;
}
- areltdata = bfd_zalloc (abfd, sizeof (struct areltdata));
+ areltdata = bfd_zmalloc (sizeof (struct areltdata));
areltdata->parsed_size = entry->size;
abfd->arelt_data = areltdata;
abfd->iostream = NULL;
if (_bfd_dwarf2_find_nearest_line (abfd, dwarf_debug_sections,
section, symbols, offset,
filename_ptr, functionname_ptr,
- line_ptr, 0,
+ line_ptr, NULL, 0,
&mdata->dwarf2_find_line_info))
return TRUE;
return FALSE;
}
}
+ if (bfd_get_format (abfd) == bfd_archive
+ && abfd->xvec == &mach_o_fat_vec)
+ return TRUE;
return _bfd_generic_close_and_cleanup (abfd);
}
projects / deliverable / binutils-gdb.git / blobdiff