/* BFD support for handling relocation entries.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
+ 2012
Free Software Foundation, Inc.
Written by Cygnus Support.
. when doing overflow checking. *}
. unsigned int bitsize;
.
-. {* Notes that the relocation is relative to the location in the
-. data section of the addend. The relocation function will
-. subtract from the relocation value the address of the location
-. being relocated. *}
+. {* The relocation is relative to the field being relocated. *}
. bfd_boolean pc_relative;
.
. {* The bit position of the reloc value in the destination.
overflow check. */
fieldmask = N_ONES (bitsize);
signmask = ~fieldmask;
- addrmask = N_ONES (addrsize) | fieldmask;
- a = (relocation & addrmask) >> rightshift;;
+ addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
+ a = (relocation & addrmask) >> rightshift;
switch (how)
{
See also bfd_check_overflow. */
fieldmask = N_ONES (howto->bitsize);
signmask = ~fieldmask;
- addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
+ addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
+ | (fieldmask << rightshift));
a = (relocation & addrmask) >> rightshift;
b = (x & howto->src_mask & addrmask) >> bitpos;
+ addrmask >>= rightshift;
switch (howto->complain_on_overflow)
{
field. Note that when bfd_vma is 32 bits, a 32-bit reloc
can't overflow, which is exactly what we want. */
ss = a & signmask;
- if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
+ if (ss != 0 && ss != (addrmask & signmask))
flag = bfd_reloc_overflow;
/* We only need this next bit of code if the sign bit of B
return flag;
}
-/* Clear a given location using a given howto, by applying a relocation value
- of zero and discarding any in-place addend. This is used for fixed-up
+/* Clear a given location using a given howto, by applying a fixed relocation
+ value and discarding any in-place addend. This is used for fixed-up
relocations against discarded symbols, to make ignorable debug or unwind
information more obvious. */
void
_bfd_clear_contents (reloc_howto_type *howto,
bfd *input_bfd,
+ asection *input_section,
bfd_byte *location)
{
int size;
/* Zero out the unwanted bits of X. */
x &= ~howto->dst_mask;
+ /* For a range list, use 1 instead of 0 as placeholder. 0
+ would terminate the list, hiding any later entries. */
+ if (strcmp (bfd_get_section_name (input_bfd, input_section),
+ ".debug_ranges") == 0
+ && (howto->dst_mask & 1) != 0)
+ x |= 1;
+
/* Put the relocated value back in the object file. */
switch (size)
{
BFD_RELOC_SPARC_GOTDATA_OP_LOX10
ENUMX
BFD_RELOC_SPARC_GOTDATA_OP
+ENUMX
+ BFD_RELOC_SPARC_JMP_IREL
+ENUMX
+ BFD_RELOC_SPARC_IRELATIVE
ENUMDOC
SPARC ELF relocations. There is probably some overlap with other
relocation types already defined.
BFD_RELOC_SPARC_L44
ENUMX
BFD_RELOC_SPARC_REGISTER
+ENUMX
+ BFD_RELOC_SPARC_H34
+ENUMX
+ BFD_RELOC_SPARC_SIZE32
+ENUMX
+ BFD_RELOC_SPARC_SIZE64
+ENUMX
+ BFD_RELOC_SPARC_WDISP10
ENUMDOC
SPARC64 relocations
BFD_RELOC_SPU_PPU32
ENUMX
BFD_RELOC_SPU_PPU64
+ENUMX
+ BFD_RELOC_SPU_ADD_PIC
ENUMDOC
SPU Relocations.
share a common GP, and the target address is adjusted for
STO_ALPHA_STD_GPLOAD.
+ENUM
+ BFD_RELOC_ALPHA_NOP
+ENUMDOC
+ The NOP relocation outputs a NOP if the longword displacement
+ between two procedure entry points is < 2^21.
+
+ENUM
+ BFD_RELOC_ALPHA_BSR
+ENUMDOC
+ The BSR relocation outputs a BSR if the longword displacement
+ between two procedure entry points is < 2^21.
+
+ENUM
+ BFD_RELOC_ALPHA_LDA
+ENUMDOC
+ The LDA relocation outputs a LDA if the longword displacement
+ between two procedure entry points is < 2^16.
+
+ENUM
+ BFD_RELOC_ALPHA_BOH
+ENUMDOC
+ The BOH relocation outputs a BSR if the longword displacement
+ between two procedure entry points is < 2^21, or else a hint.
+
ENUM
BFD_RELOC_ALPHA_TLSGD
ENUMX
ENUM
BFD_RELOC_MIPS_JMP
+ENUMX
+ BFD_RELOC_MICROMIPS_JMP
ENUMDOC
- Bits 27..2 of the relocation address shifted right 2 bits;
- simple reloc otherwise.
+ The MIPS jump instruction.
ENUM
BFD_RELOC_MIPS16_JMP
BFD_RELOC_HI16
ENUMDOC
High 16 bits of 32-bit value; simple reloc.
+
ENUM
BFD_RELOC_HI16_S
ENUMDOC
extended and added to form the final result. If the low 16
bits form a negative number, we need to add one to the high value
to compensate for the borrow when the low bits are added.
+
ENUM
BFD_RELOC_LO16
ENUMDOC
ENUMDOC
MIPS16 low 16 bits.
+ENUM
+ BFD_RELOC_MIPS16_TLS_GD
+ENUMX
+ BFD_RELOC_MIPS16_TLS_LDM
+ENUMX
+ BFD_RELOC_MIPS16_TLS_DTPREL_HI16
+ENUMX
+ BFD_RELOC_MIPS16_TLS_DTPREL_LO16
+ENUMX
+ BFD_RELOC_MIPS16_TLS_GOTTPREL
+ENUMX
+ BFD_RELOC_MIPS16_TLS_TPREL_HI16
+ENUMX
+ BFD_RELOC_MIPS16_TLS_TPREL_LO16
+ENUMDOC
+ MIPS16 TLS relocations
+
ENUM
BFD_RELOC_MIPS_LITERAL
+ENUMX
+ BFD_RELOC_MICROMIPS_LITERAL
ENUMDOC
Relocation against a MIPS literal section.
+ENUM
+ BFD_RELOC_MICROMIPS_7_PCREL_S1
+ENUMX
+ BFD_RELOC_MICROMIPS_10_PCREL_S1
+ENUMX
+ BFD_RELOC_MICROMIPS_16_PCREL_S1
+ENUMDOC
+ microMIPS PC-relative relocations.
+
+ENUM
+ BFD_RELOC_MICROMIPS_GPREL16
+ENUMX
+ BFD_RELOC_MICROMIPS_HI16
+ENUMX
+ BFD_RELOC_MICROMIPS_HI16_S
+ENUMX
+ BFD_RELOC_MICROMIPS_LO16
+ENUMDOC
+ microMIPS versions of generic BFD relocs.
+
ENUM
BFD_RELOC_MIPS_GOT16
+ENUMX
+ BFD_RELOC_MICROMIPS_GOT16
ENUMX
BFD_RELOC_MIPS_CALL16
+ENUMX
+ BFD_RELOC_MICROMIPS_CALL16
ENUMX
BFD_RELOC_MIPS_GOT_HI16
+ENUMX
+ BFD_RELOC_MICROMIPS_GOT_HI16
ENUMX
BFD_RELOC_MIPS_GOT_LO16
+ENUMX
+ BFD_RELOC_MICROMIPS_GOT_LO16
ENUMX
BFD_RELOC_MIPS_CALL_HI16
+ENUMX
+ BFD_RELOC_MICROMIPS_CALL_HI16
ENUMX
BFD_RELOC_MIPS_CALL_LO16
+ENUMX
+ BFD_RELOC_MICROMIPS_CALL_LO16
ENUMX
BFD_RELOC_MIPS_SUB
+ENUMX
+ BFD_RELOC_MICROMIPS_SUB
ENUMX
BFD_RELOC_MIPS_GOT_PAGE
+ENUMX
+ BFD_RELOC_MICROMIPS_GOT_PAGE
ENUMX
BFD_RELOC_MIPS_GOT_OFST
+ENUMX
+ BFD_RELOC_MICROMIPS_GOT_OFST
ENUMX
BFD_RELOC_MIPS_GOT_DISP
+ENUMX
+ BFD_RELOC_MICROMIPS_GOT_DISP
ENUMX
BFD_RELOC_MIPS_SHIFT5
ENUMX
BFD_RELOC_MIPS_DELETE
ENUMX
BFD_RELOC_MIPS_HIGHEST
+ENUMX
+ BFD_RELOC_MICROMIPS_HIGHEST
ENUMX
BFD_RELOC_MIPS_HIGHER
+ENUMX
+ BFD_RELOC_MICROMIPS_HIGHER
ENUMX
BFD_RELOC_MIPS_SCN_DISP
+ENUMX
+ BFD_RELOC_MICROMIPS_SCN_DISP
ENUMX
BFD_RELOC_MIPS_REL16
ENUMX
BFD_RELOC_MIPS_RELGOT
ENUMX
BFD_RELOC_MIPS_JALR
+ENUMX
+ BFD_RELOC_MICROMIPS_JALR
ENUMX
BFD_RELOC_MIPS_TLS_DTPMOD32
ENUMX
BFD_RELOC_MIPS_TLS_DTPREL64
ENUMX
BFD_RELOC_MIPS_TLS_GD
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_GD
ENUMX
BFD_RELOC_MIPS_TLS_LDM
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_LDM
ENUMX
BFD_RELOC_MIPS_TLS_DTPREL_HI16
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
ENUMX
BFD_RELOC_MIPS_TLS_DTPREL_LO16
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
ENUMX
BFD_RELOC_MIPS_TLS_GOTTPREL
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_GOTTPREL
ENUMX
BFD_RELOC_MIPS_TLS_TPREL32
ENUMX
BFD_RELOC_MIPS_TLS_TPREL64
ENUMX
BFD_RELOC_MIPS_TLS_TPREL_HI16
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
ENUMX
BFD_RELOC_MIPS_TLS_TPREL_LO16
+ENUMX
+ BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
ENUMDOC
MIPS ELF relocations.
COMMENT
MIPS ELF relocations (VxWorks and PLT extensions).
COMMENT
+ENUM
+ BFD_RELOC_MOXIE_10_PCREL
+ENUMDOC
+ Moxie ELF relocations.
+COMMENT
+
ENUM
BFD_RELOC_FRV_LABEL16
ENUMX
The addend of this reloc is an alignment power that must
be honoured at the offset's location, regardless of linker
relaxation.
+ENUM
+ BFD_RELOC_MN10300_TLS_GD
+ENUMX
+ BFD_RELOC_MN10300_TLS_LD
+ENUMX
+ BFD_RELOC_MN10300_TLS_LDO
+ENUMX
+ BFD_RELOC_MN10300_TLS_GOTIE
+ENUMX
+ BFD_RELOC_MN10300_TLS_IE
+ENUMX
+ BFD_RELOC_MN10300_TLS_LE
+ENUMX
+ BFD_RELOC_MN10300_TLS_DTPMOD
+ENUMX
+ BFD_RELOC_MN10300_TLS_DTPOFF
+ENUMX
+ BFD_RELOC_MN10300_TLS_TPOFF
+ENUMDOC
+ Various TLS-related relocations.
+ENUM
+ BFD_RELOC_MN10300_32_PCREL
+ENUMDOC
+ This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
+ instruction.
+ENUM
+ BFD_RELOC_MN10300_16_PCREL
+ENUMDOC
+ This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
+ instruction.
COMMENT
ENUM
BFD_RELOC_386_TLS_DESC_CALL
ENUMX
BFD_RELOC_386_TLS_DESC
+ENUMX
+ BFD_RELOC_386_IRELATIVE
ENUMDOC
i386/elf relocations
BFD_RELOC_X86_64_TLSDESC_CALL
ENUMX
BFD_RELOC_X86_64_TLSDESC
+ENUMX
+ BFD_RELOC_X86_64_IRELATIVE
ENUMDOC
x86-64/elf relocations
BFD_RELOC_PPC_EMB_BIT_FLD
ENUMX
BFD_RELOC_PPC_EMB_RELSDA
+ENUMX
+ BFD_RELOC_PPC_VLE_REL8
+ENUMX
+ BFD_RELOC_PPC_VLE_REL15
+ENUMX
+ BFD_RELOC_PPC_VLE_REL24
+ENUMX
+ BFD_RELOC_PPC_VLE_LO16A
+ENUMX
+ BFD_RELOC_PPC_VLE_LO16D
+ENUMX
+ BFD_RELOC_PPC_VLE_HI16A
+ENUMX
+ BFD_RELOC_PPC_VLE_HI16D
+ENUMX
+ BFD_RELOC_PPC_VLE_HA16A
+ENUMX
+ BFD_RELOC_PPC_VLE_HA16D
+ENUMX
+ BFD_RELOC_PPC_VLE_SDA21
+ENUMX
+ BFD_RELOC_PPC_VLE_SDA21_LO
+ENUMX
+ BFD_RELOC_PPC_VLE_SDAREL_LO16A
+ENUMX
+ BFD_RELOC_PPC_VLE_SDAREL_LO16D
+ENUMX
+ BFD_RELOC_PPC_VLE_SDAREL_HI16A
+ENUMX
+ BFD_RELOC_PPC_VLE_SDAREL_HI16D
+ENUMX
+ BFD_RELOC_PPC_VLE_SDAREL_HA16A
+ENUMX
+ BFD_RELOC_PPC_VLE_SDAREL_HA16D
ENUMX
BFD_RELOC_PPC64_HIGHER
ENUMX
ENUM
BFD_RELOC_PPC_TLS
+ENUMX
+ BFD_RELOC_PPC_TLSGD
+ENUMX
+ BFD_RELOC_PPC_TLSLD
ENUMX
BFD_RELOC_PPC_DTPMOD
ENUMX
BFD_RELOC_ARM_GOTOFF
ENUMX
BFD_RELOC_ARM_GOTPC
+ENUMX
+ BFD_RELOC_ARM_GOT_PREL
ENUMDOC
Relocations for setting up GOTs and PLTs for shared libraries.
BFD_RELOC_ARM_TLS_IE32
ENUMX
BFD_RELOC_ARM_TLS_LE32
+ENUMX
+ BFD_RELOC_ARM_TLS_GOTDESC
+ENUMX
+ BFD_RELOC_ARM_TLS_CALL
+ENUMX
+ BFD_RELOC_ARM_THM_TLS_CALL
+ENUMX
+ BFD_RELOC_ARM_TLS_DESCSEQ
+ENUMX
+ BFD_RELOC_ARM_THM_TLS_DESCSEQ
+ENUMX
+ BFD_RELOC_ARM_TLS_DESC
ENUMDOC
ARM thread-local storage relocations.
ENUMDOC
Annotation of BX instructions.
+ENUM
+ BFD_RELOC_ARM_IRELATIVE
+ENUMDOC
+ ARM support for STT_GNU_IFUNC.
+
ENUM
BFD_RELOC_ARM_IMMEDIATE
ENUMX
BFD_RELOC_ARM_SHIFT_IMM
ENUMX
BFD_RELOC_ARM_SMC
+ENUMX
+ BFD_RELOC_ARM_HVC
ENUMX
BFD_RELOC_ARM_SWI
ENUMX
BFD_RELOC_SH_TLS_DTPOFF32
ENUMX
BFD_RELOC_SH_TLS_TPOFF32
+ENUMX
+ BFD_RELOC_SH_GOT20
+ENUMX
+ BFD_RELOC_SH_GOTOFF20
+ENUMX
+ BFD_RELOC_SH_GOTFUNCDESC
+ENUMX
+ BFD_RELOC_SH_GOTFUNCDESC20
+ENUMX
+ BFD_RELOC_SH_GOTOFFFUNCDESC
+ENUMX
+ BFD_RELOC_SH_GOTOFFFUNCDESC20
+ENUMX
+ BFD_RELOC_SH_FUNCDESC
ENUMDOC
Renesas / SuperH SH relocs. Not all of these appear in object files.
This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
instructions.
ENUM
- BFD_RELOC_MN10300_32_PCREL
+ BFD_RELOC_V850_16_PCREL
ENUMDOC
- This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
- instruction.
-ENUM
- BFD_RELOC_MN10300_16_PCREL
+ This is a 16-bit reloc.
+ENUM
+ BFD_RELOC_V850_17_PCREL
ENUMDOC
- This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
- instruction.
+ This is a 17-bit reloc.
+ENUM
+ BFD_RELOC_V850_23
+ENUMDOC
+ This is a 23-bit reloc.
+ENUM
+ BFD_RELOC_V850_32_PCREL
+ENUMDOC
+ This is a 32-bit reloc.
+ENUM
+ BFD_RELOC_V850_32_ABS
+ENUMDOC
+ This is a 32-bit reloc.
+ENUM
+ BFD_RELOC_V850_16_SPLIT_OFFSET
+ENUMDOC
+ This is a 16-bit reloc.
+ENUM
+ BFD_RELOC_V850_16_S1
+ENUMDOC
+ This is a 16-bit reloc.
+ENUM
+ BFD_RELOC_V850_LO16_S1
+ENUMDOC
+ Low 16 bits. 16 bit shifted by 1.
+ENUM
+ BFD_RELOC_V850_CALLT_15_16_OFFSET
+ENUMDOC
+ This is a 16 bit offset from the call table base pointer.
+ENUM
+ BFD_RELOC_V850_32_GOTPCREL
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_16_GOT
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_32_GOT
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_22_PLT_PCREL
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_32_PLT_PCREL
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_COPY
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_GLOB_DAT
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_JMP_SLOT
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_RELATIVE
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_16_GOTOFF
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_32_GOTOFF
+ENUMDOC
+ DSO relocations.
+ENUM
+ BFD_RELOC_V850_CODE
+ENUMDOC
+ start code.
+ENUM
+ BFD_RELOC_V850_DATA
+ENUMDOC
+ start data in text.
ENUM
BFD_RELOC_TIC30_LDP
significant 7 bits of a 23-bit extended address are placed into
the opcode.
+ENUM
+ BFD_RELOC_C6000_PCR_S21
+ENUMX
+ BFD_RELOC_C6000_PCR_S12
+ENUMX
+ BFD_RELOC_C6000_PCR_S10
+ENUMX
+ BFD_RELOC_C6000_PCR_S7
+ENUMX
+ BFD_RELOC_C6000_ABS_S16
+ENUMX
+ BFD_RELOC_C6000_ABS_L16
+ENUMX
+ BFD_RELOC_C6000_ABS_H16
+ENUMX
+ BFD_RELOC_C6000_SBR_U15_B
+ENUMX
+ BFD_RELOC_C6000_SBR_U15_H
+ENUMX
+ BFD_RELOC_C6000_SBR_U15_W
+ENUMX
+ BFD_RELOC_C6000_SBR_S16
+ENUMX
+ BFD_RELOC_C6000_SBR_L16_B
+ENUMX
+ BFD_RELOC_C6000_SBR_L16_H
+ENUMX
+ BFD_RELOC_C6000_SBR_L16_W
+ENUMX
+ BFD_RELOC_C6000_SBR_H16_B
+ENUMX
+ BFD_RELOC_C6000_SBR_H16_H
+ENUMX
+ BFD_RELOC_C6000_SBR_H16_W
+ENUMX
+ BFD_RELOC_C6000_SBR_GOT_U15_W
+ENUMX
+ BFD_RELOC_C6000_SBR_GOT_L16_W
+ENUMX
+ BFD_RELOC_C6000_SBR_GOT_H16_W
+ENUMX
+ BFD_RELOC_C6000_DSBT_INDEX
+ENUMX
+ BFD_RELOC_C6000_PREL31
+ENUMX
+ BFD_RELOC_C6000_COPY
+ENUMX
+ BFD_RELOC_C6000_JUMP_SLOT
+ENUMX
+ BFD_RELOC_C6000_EHTYPE
+ENUMX
+ BFD_RELOC_C6000_PCR_H16
+ENUMX
+ BFD_RELOC_C6000_PCR_L16
+ENUMX
+ BFD_RELOC_C6000_ALIGN
+ENUMX
+ BFD_RELOC_C6000_FPHEAD
+ENUMX
+ BFD_RELOC_C6000_NOCMP
+ENUMDOC
+ TMS320C6000 relocations.
+
ENUM
BFD_RELOC_FR30_48
ENUMDOC
ENUMDOC
This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
instructions
-
-ENUM
- BFD_RELOC_390_12
-ENUMDOC
- Direct 12 bit.
-ENUM
- BFD_RELOC_390_GOT12
-ENUMDOC
- 12 bit GOT offset.
-ENUM
- BFD_RELOC_390_PLT32
-ENUMDOC
- 32 bit PC relative PLT address.
-ENUM
- BFD_RELOC_390_COPY
-ENUMDOC
- Copy symbol at runtime.
-ENUM
- BFD_RELOC_390_GLOB_DAT
-ENUMDOC
- Create GOT entry.
-ENUM
- BFD_RELOC_390_JMP_SLOT
-ENUMDOC
- Create PLT entry.
ENUM
- BFD_RELOC_390_RELATIVE
+ BFD_RELOC_AVR_8_LO
ENUMDOC
- Adjust by program base.
+ This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
+ in .byte lo8(symbol)
ENUM
- BFD_RELOC_390_GOTPC
+ BFD_RELOC_AVR_8_HI
ENUMDOC
- 32 bit PC relative offset to GOT.
+ This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
+ in .byte hi8(symbol)
ENUM
- BFD_RELOC_390_GOT16
+ BFD_RELOC_AVR_8_HLO
ENUMDOC
- 16 bit GOT offset.
+ This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
+ in .byte hlo8(symbol)
+
ENUM
- BFD_RELOC_390_PC16DBL
+ BFD_RELOC_RL78_NEG8
+ENUMX
+ BFD_RELOC_RL78_NEG16
+ENUMX
+ BFD_RELOC_RL78_NEG24
+ENUMX
+ BFD_RELOC_RL78_NEG32
+ENUMX
+ BFD_RELOC_RL78_16_OP
+ENUMX
+ BFD_RELOC_RL78_24_OP
+ENUMX
+ BFD_RELOC_RL78_32_OP
+ENUMX
+ BFD_RELOC_RL78_8U
+ENUMX
+ BFD_RELOC_RL78_16U
+ENUMX
+ BFD_RELOC_RL78_24U
+ENUMX
+ BFD_RELOC_RL78_DIR3U_PCREL
+ENUMX
+ BFD_RELOC_RL78_DIFF
+ENUMX
+ BFD_RELOC_RL78_GPRELB
+ENUMX
+ BFD_RELOC_RL78_GPRELW
+ENUMX
+ BFD_RELOC_RL78_GPRELL
+ENUMX
+ BFD_RELOC_RL78_SYM
+ENUMX
+ BFD_RELOC_RL78_OP_SUBTRACT
+ENUMX
+ BFD_RELOC_RL78_OP_NEG
+ENUMX
+ BFD_RELOC_RL78_OP_AND
+ENUMX
+ BFD_RELOC_RL78_OP_SHRA
+ENUMX
+ BFD_RELOC_RL78_ABS8
+ENUMX
+ BFD_RELOC_RL78_ABS16
+ENUMX
+ BFD_RELOC_RL78_ABS16_REV
+ENUMX
+ BFD_RELOC_RL78_ABS32
+ENUMX
+ BFD_RELOC_RL78_ABS32_REV
+ENUMX
+ BFD_RELOC_RL78_ABS16U
+ENUMX
+ BFD_RELOC_RL78_ABS16UW
+ENUMX
+ BFD_RELOC_RL78_ABS16UL
+ENUMX
+ BFD_RELOC_RL78_RELAX
+ENUMX
+ BFD_RELOC_RL78_HI16
+ENUMX
+ BFD_RELOC_RL78_HI8
+ENUMX
+ BFD_RELOC_RL78_LO16
ENUMDOC
- PC relative 16 bit shifted by 1.
+ Renesas RL78 Relocations.
+
ENUM
- BFD_RELOC_390_PLT16DBL
-ENUMDOC
+ BFD_RELOC_RX_NEG8
+ENUMX
+ BFD_RELOC_RX_NEG16
+ENUMX
+ BFD_RELOC_RX_NEG24
+ENUMX
+ BFD_RELOC_RX_NEG32
+ENUMX
+ BFD_RELOC_RX_16_OP
+ENUMX
+ BFD_RELOC_RX_24_OP
+ENUMX
+ BFD_RELOC_RX_32_OP
+ENUMX
+ BFD_RELOC_RX_8U
+ENUMX
+ BFD_RELOC_RX_16U
+ENUMX
+ BFD_RELOC_RX_24U
+ENUMX
+ BFD_RELOC_RX_DIR3U_PCREL
+ENUMX
+ BFD_RELOC_RX_DIFF
+ENUMX
+ BFD_RELOC_RX_GPRELB
+ENUMX
+ BFD_RELOC_RX_GPRELW
+ENUMX
+ BFD_RELOC_RX_GPRELL
+ENUMX
+ BFD_RELOC_RX_SYM
+ENUMX
+ BFD_RELOC_RX_OP_SUBTRACT
+ENUMX
+ BFD_RELOC_RX_OP_NEG
+ENUMX
+ BFD_RELOC_RX_ABS8
+ENUMX
+ BFD_RELOC_RX_ABS16
+ENUMX
+ BFD_RELOC_RX_ABS16_REV
+ENUMX
+ BFD_RELOC_RX_ABS32
+ENUMX
+ BFD_RELOC_RX_ABS32_REV
+ENUMX
+ BFD_RELOC_RX_ABS16U
+ENUMX
+ BFD_RELOC_RX_ABS16UW
+ENUMX
+ BFD_RELOC_RX_ABS16UL
+ENUMX
+ BFD_RELOC_RX_RELAX
+ENUMDOC
+ Renesas RX Relocations.
+
+ENUM
+ BFD_RELOC_390_12
+ENUMDOC
+ Direct 12 bit.
+ENUM
+ BFD_RELOC_390_GOT12
+ENUMDOC
+ 12 bit GOT offset.
+ENUM
+ BFD_RELOC_390_PLT32
+ENUMDOC
+ 32 bit PC relative PLT address.
+ENUM
+ BFD_RELOC_390_COPY
+ENUMDOC
+ Copy symbol at runtime.
+ENUM
+ BFD_RELOC_390_GLOB_DAT
+ENUMDOC
+ Create GOT entry.
+ENUM
+ BFD_RELOC_390_JMP_SLOT
+ENUMDOC
+ Create PLT entry.
+ENUM
+ BFD_RELOC_390_RELATIVE
+ENUMDOC
+ Adjust by program base.
+ENUM
+ BFD_RELOC_390_GOTPC
+ENUMDOC
+ 32 bit PC relative offset to GOT.
+ENUM
+ BFD_RELOC_390_GOT16
+ENUMDOC
+ 16 bit GOT offset.
+ENUM
+ BFD_RELOC_390_PC16DBL
+ENUMDOC
+ PC relative 16 bit shifted by 1.
+ENUM
+ BFD_RELOC_390_PLT16DBL
+ENUMDOC
16 bit PC rel. PLT shifted by 1.
ENUM
BFD_RELOC_390_PC32DBL
Long displacement extension.
ENUM
- BFD_RELOC_SCORE_DUMMY1
+ BFD_RELOC_390_IRELATIVE
ENUMDOC
- Score relocations
+ STT_GNU_IFUNC relocation.
+
ENUM
BFD_RELOC_SCORE_GPREL15
ENUMDOC
+ Score relocations
Low 16 bit for load/store
ENUM
BFD_RELOC_SCORE_DUMMY2
BFD_RELOC_SCORE_BRANCH
ENUMDOC
This is a 19-bit reloc with the right 1 bit assumed to be 0
+ENUM
+ BFD_RELOC_SCORE_IMM30
+ENUMDOC
+ This is a 32-bit reloc for 48-bit instructions.
+ENUM
+ BFD_RELOC_SCORE_IMM32
+ENUMDOC
+ This is a 32-bit reloc for 48-bit instructions.
ENUM
BFD_RELOC_SCORE16_JMP
ENUMDOC
BFD_RELOC_SCORE16_BRANCH
ENUMDOC
This is a 8-bit reloc with the right 1 bit assumed to be 0
+ENUM
+ BFD_RELOC_SCORE_BCMP
+ENUMDOC
+ This is a 9-bit reloc with the right 1 bit assumed to be 0
ENUM
BFD_RELOC_SCORE_GOT15
ENUMX
ENUMDOC
Motorola 68HC12 reloc.
This is the 5 bits of a value.
-
+ENUM
+ BFD_RELOC_XGATE_RL_JUMP
+ENUMDOC
+ Freescale XGATE reloc.
+ This reloc marks the beginning of a bra/jal instruction.
+ENUM
+ BFD_RELOC_XGATE_RL_GROUP
+ENUMDOC
+ Freescale XGATE reloc.
+ This reloc marks a group of several instructions that gcc generates
+ and for which the linker relaxation pass can modify and/or remove
+ some of them.
+ENUM
+ BFD_RELOC_XGATE_LO16
+ENUMDOC
+ Freescale XGATE reloc.
+ This is the 16-bit lower part of an address. It is used for the '16-bit'
+ instructions.
+ENUM
+ BFD_RELOC_XGATE_GPAGE
+ENUMDOC
+ Freescale XGATE reloc.
+ENUM
+ BFD_RELOC_XGATE_24
+ENUMDOC
+ Freescale XGATE reloc.
+ENUM
+ BFD_RELOC_XGATE_PCREL_9
+ENUMDOC
+ Freescale XGATE reloc.
+ This is a 9-bit pc-relative reloc.
+ENUM
+ BFD_RELOC_XGATE_PCREL_10
+ENUMDOC
+ Freescale XGATE reloc.
+ This is a 10-bit pc-relative reloc.
+ENUM
+ BFD_RELOC_XGATE_IMM8_LO
+ENUMDOC
+ Freescale XGATE reloc.
+ This is the 16-bit lower part of an address. It is used for the '16-bit'
+ instructions.
+ENUM
+ BFD_RELOC_XGATE_IMM8_HI
+ENUMDOC
+ Freescale XGATE reloc.
+ This is the 16-bit higher part of an address. It is used for the '16-bit'
+ instructions.
+ENUM
+ BFD_RELOC_XGATE_IMM3
+ENUMDOC
+ Freescale XGATE reloc.
+ This is a 3-bit pc-relative reloc.
+ENUM
+ BFD_RELOC_XGATE_IMM4
+ENUMDOC
+ Freescale XGATE reloc.
+ This is a 4-bit pc-relative reloc.
+ENUM
+ BFD_RELOC_XGATE_IMM5
+ENUMDOC
+ Freescale XGATE reloc.
+ This is a 5-bit pc-relative reloc.
+ENUM
+ BFD_RELOC_M68HC12_9B
+ENUMDOC
+ Motorola 68HC12 reloc.
+ This is the 9 bits of a value.
+ENUM
+ BFD_RELOC_M68HC12_16B
+ENUMDOC
+ Motorola 68HC12 reloc.
+ This is the 16 bits of a value.
+ENUM
+ BFD_RELOC_M68HC12_9_PCREL
+ENUMDOC
+ Motorola 68HC12/XGATE reloc.
+ This is a PCREL9 branch.
+ENUM
+ BFD_RELOC_M68HC12_10_PCREL
+ENUMDOC
+ Motorola 68HC12/XGATE reloc.
+ This is a PCREL10 branch.
+ENUM
+ BFD_RELOC_M68HC12_LO8XG
+ENUMDOC
+ Motorola 68HC12/XGATE reloc.
+ This is the 8 bit low part of an absolute address and immediately precedes
+ a matching HI8XG part.
+ENUM
+ BFD_RELOC_M68HC12_HI8XG
+ENUMDOC
+ Motorola 68HC12/XGATE reloc.
+ This is the 8 bit high part of an absolute address and immediately follows
+ a matching LO8XG part.
ENUM
BFD_RELOC_16C_NUM08
ENUMX
BFD_RELOC_LM32_RELATIVE
ENUMDOC
Lattice Mico32 relocations.
-
-ENDSENUM
- BFD_RELOC_UNUSED
-CODE_FRAGMENT
-.
-.typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
-*/
-
-/*
-FUNCTION
- bfd_reloc_type_lookup
- bfd_reloc_name_lookup
-
-SYNOPSIS
- reloc_howto_type *bfd_reloc_type_lookup
- (bfd *abfd, bfd_reloc_code_real_type code);
- reloc_howto_type *bfd_reloc_name_lookup
- (bfd *abfd, const char *reloc_name);
-
-DESCRIPTION
- Return a pointer to a howto structure which, when
- invoked, will perform the relocation @var{code} on data from the
- architecture noted.
-
-*/
-
-reloc_howto_type *
-bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
-{
- return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
-}
-
-reloc_howto_type *
-bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
-{
- return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
-}
-
-static reloc_howto_type bfd_howto_32 =
-HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
-
-/*
-INTERNAL_FUNCTION
- bfd_default_reloc_type_lookup
-SYNOPSIS
- reloc_howto_type *bfd_default_reloc_type_lookup
- (bfd *abfd, bfd_reloc_code_real_type code);
+ENUM
+ BFD_RELOC_MACH_O_SECTDIFF
+ENUMDOC
+ Difference between two section addreses. Must be followed by a
+ BFD_RELOC_MACH_O_PAIR.
+ENUM
+ BFD_RELOC_MACH_O_LOCAL_SECTDIFF
+ENUMDOC
+ Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
+ENUM
+ BFD_RELOC_MACH_O_PAIR
+ENUMDOC
+ Pair of relocation. Contains the first symbol.
-DESCRIPTION
- Provides a default relocation lookup routine for any architecture.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_BRANCH32
+ENUMX
+ BFD_RELOC_MACH_O_X86_64_BRANCH8
+ENUMDOC
+ PCREL relocations. They are marked as branch to create PLT entry if
+ required.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_GOT
+ENUMDOC
+ Used when referencing a GOT entry.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_GOT_LOAD
+ENUMDOC
+ Used when loading a GOT entry with movq. It is specially marked so that
+ the linker could optimize the movq to a leaq if possible.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
+ENUMDOC
+ Symbol will be substracted. Must be followed by a BFD_RELOC_64.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
+ENUMDOC
+ Symbol will be substracted. Must be followed by a BFD_RELOC_64.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_PCREL32_1
+ENUMDOC
+ Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_PCREL32_2
+ENUMDOC
+ Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
+ENUM
+ BFD_RELOC_MACH_O_X86_64_PCREL32_4
+ENUMDOC
+ Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
-*/
+ENUM
+ BFD_RELOC_MICROBLAZE_32_LO
+ENUMDOC
+ This is a 32 bit reloc for the microblaze that stores the
+ low 16 bits of a value
+ENUM
+ BFD_RELOC_MICROBLAZE_32_LO_PCREL
+ENUMDOC
+ This is a 32 bit pc-relative reloc for the microblaze that
+ stores the low 16 bits of a value
+ENUM
+ BFD_RELOC_MICROBLAZE_32_ROSDA
+ENUMDOC
+ This is a 32 bit reloc for the microblaze that stores a
+ value relative to the read-only small data area anchor
+ENUM
+ BFD_RELOC_MICROBLAZE_32_RWSDA
+ENUMDOC
+ This is a 32 bit reloc for the microblaze that stores a
+ value relative to the read-write small data area anchor
+ENUM
+ BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
+ENUMDOC
+ This is a 32 bit reloc for the microblaze to handle
+ expressions of the form "Symbol Op Symbol"
+ENUM
+ BFD_RELOC_MICROBLAZE_64_NONE
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). No relocation is
+ done here - only used for relaxing
+ENUM
+ BFD_RELOC_MICROBLAZE_64_GOTPC
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). The relocation is
+ PC-relative GOT offset
+ENUM
+ BFD_RELOC_MICROBLAZE_64_GOT
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). The relocation is
+ GOT offset
+ENUM
+ BFD_RELOC_MICROBLAZE_64_PLT
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit pc relative
+ value in two words (with an imm instruction). The relocation is
+ PC-relative offset into PLT
+ENUM
+ BFD_RELOC_MICROBLAZE_64_GOTOFF
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit GOT relative
+ value in two words (with an imm instruction). The relocation is
+ relative offset from _GLOBAL_OFFSET_TABLE_
+ENUM
+ BFD_RELOC_MICROBLAZE_32_GOTOFF
+ENUMDOC
+ This is a 32 bit reloc that stores the 32 bit GOT relative
+ value in a word. The relocation is relative offset from
+ _GLOBAL_OFFSET_TABLE_
+ENUM
+ BFD_RELOC_MICROBLAZE_COPY
+ENUMDOC
+ This is used to tell the dynamic linker to copy the value out of
+ the dynamic object into the runtime process image.
+ENUM
+ BFD_RELOC_MICROBLAZE_64_TLS
+ENUMDOC
+ Unused Reloc
+ENUM
+ BFD_RELOC_MICROBLAZE_64_TLSGD
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit GOT relative value
+ of the GOT TLS GD info entry in two words (with an imm instruction). The
+ relocation is GOT offset.
+ENUM
+ BFD_RELOC_MICROBLAZE_64_TLSLD
+ENUMDOC
+ This is a 64 bit reloc that stores the 32 bit GOT relative value
+ of the GOT TLS LD info entry in two words (with an imm instruction). The
+ relocation is GOT offset.
+ENUM
+ BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
+ENUMDOC
+ This is a 32 bit reloc that stores the Module ID to GOT(n).
+ENUM
+ BFD_RELOC_MICROBLAZE_32_TLSDTPREL
+ENUMDOC
+ This is a 32 bit reloc that stores TLS offset to GOT(n+1).
+ENUM
+ BFD_RELOC_MICROBLAZE_64_TLSDTPREL
+ENUMDOC
+ This is a 32 bit reloc for storing TLS offset to two words (uses imm
+ instruction)
+ENUM
+ BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
+ENUMDOC
+ This is a 64 bit reloc that stores 32-bit thread pointer relative offset
+ to two words (uses imm instruction).
+ENUM
+ BFD_RELOC_MICROBLAZE_64_TLSTPREL
+ENUMDOC
+ This is a 64 bit reloc that stores 32-bit thread pointer relative offset
+ to two words (uses imm instruction).
-reloc_howto_type *
-bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
-{
- switch (code)
- {
- case BFD_RELOC_CTOR:
- /* The type of reloc used in a ctor, which will be as wide as the
- address - so either a 64, 32, or 16 bitter. */
- switch (bfd_get_arch_info (abfd)->bits_per_address)
- {
- case 64:
- BFD_FAIL ();
- case 32:
- return &bfd_howto_32;
- case 16:
- BFD_FAIL ();
- default:
- BFD_FAIL ();
- }
- default:
+ENUM
+ BFD_RELOC_AARCH64_ADD_LO12
+ENUMDOC
+ AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
+ Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_GOT_LD_PREL19
+ENUMDOC
+ AArch64 Load Literal instruction, holding a 19 bit PC relative word
+ offset of the global offset table entry for a symbol. The lowest two
+ bits must be zero and are not stored in the instruction, giving a 21
+ bit signed byte offset. This relocation type requires signed overflow
+ checking.
+ENUM
+ BFD_RELOC_AARCH64_ADR_GOT_PAGE
+ENUMDOC
+ Get to the page base of the global offset table entry for a symbol as
+ part of an ADRP instruction using a 21 bit PC relative value.Used in
+ conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
+ENUM
+ BFD_RELOC_AARCH64_ADR_HI21_PCREL
+ENUMDOC
+ AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
+ offset, giving a 4KB aligned page base address.
+ENUM
+ BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
+ENUMDOC
+ AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
+ offset, giving a 4KB aligned page base address, but with no overflow
+ checking.
+ENUM
+ BFD_RELOC_AARCH64_ADR_LO21_PCREL
+ENUMDOC
+ AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
+ENUM
+ BFD_RELOC_AARCH64_BRANCH19
+ENUMDOC
+ AArch64 19 bit pc-relative conditional branch and compare & branch.
+ The lowest two bits must be zero and are not stored in the instruction,
+ giving a 21 bit signed byte offset.
+ENUM
+ BFD_RELOC_AARCH64_CALL26
+ENUMDOC
+ AArch64 26 bit pc-relative unconditional branch and link.
+ The lowest two bits must be zero and are not stored in the instruction,
+ giving a 28 bit signed byte offset.
+ENUM
+ BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
+ENUMDOC
+ AArch64 pseudo relocation code to be used internally by the AArch64
+ assembler and not (currently) written to any object files.
+ENUM
+ BFD_RELOC_AARCH64_JUMP26
+ENUMDOC
+ AArch64 26 bit pc-relative unconditional branch.
+ The lowest two bits must be zero and are not stored in the instruction,
+ giving a 28 bit signed byte offset.
+ENUM
+ BFD_RELOC_AARCH64_LD_LO19_PCREL
+ENUMDOC
+ AArch64 Load Literal instruction, holding a 19 bit pc-relative word
+ offset. The lowest two bits must be zero and are not stored in the
+ instruction, giving a 21 bit signed byte offset.
+ENUM
+ BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
+ENUMDOC
+ Unsigned 12 bit byte offset for 64 bit load/store from the page of
+ the GOT entry for this symbol. Used in conjunction with
+ BFD_RELOC_AARCH64_ADR_GOTPAGE.
+ENUM
+ BFD_RELOC_AARCH64_LDST_LO12
+ENUMDOC
+ AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
+ address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_LDST8_LO12
+ENUMDOC
+ AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
+ address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_LDST16_LO12
+ENUMDOC
+ AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
+ address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_LDST32_LO12
+ENUMDOC
+ AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
+ address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_LDST64_LO12
+ENUMDOC
+ AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
+ address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_LDST128_LO12
+ENUMDOC
+ AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
+ address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G0
+ENUMDOC
+ AArch64 MOV[NZK] instruction with most significant bits 0 to 15
+ of an unsigned address/value.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G0_S
+ENUMDOC
+ AArch64 MOV[NZ] instruction with most significant bits 0 to 15
+ of a signed value. Changes instruction to MOVZ or MOVN depending on the
+ value's sign.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G0_NC
+ENUMDOC
+ AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
+ an address/value. No overflow checking.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G1
+ENUMDOC
+ AArch64 MOV[NZK] instruction with most significant bits 16 to 31
+ of an unsigned address/value.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G1_NC
+ENUMDOC
+ AArch64 MOV[NZK] instruction with less significant bits 16 to 31
+ of an address/value. No overflow checking.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G1_S
+ENUMDOC
+ AArch64 MOV[NZ] instruction with most significant bits 16 to 31
+ of a signed value. Changes instruction to MOVZ or MOVN depending on the
+ value's sign.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G2
+ENUMDOC
+ AArch64 MOV[NZK] instruction with most significant bits 32 to 47
+ of an unsigned address/value.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G2_NC
+ENUMDOC
+ AArch64 MOV[NZK] instruction with less significant bits 32 to 47
+ of an address/value. No overflow checking.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G2_S
+ENUMDOC
+ AArch64 MOV[NZ] instruction with most significant bits 32 to 47
+ of a signed value. Changes instruction to MOVZ or MOVN depending on the
+ value's sign.
+ENUM
+ BFD_RELOC_AARCH64_MOVW_G3
+ENUMDOC
+ AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
+ of a signed or unsigned address/value.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC
+ENUMDOC
+ AArch64 TLS relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_ADD
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_CALL
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_LD64_PREL19
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_LDR
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSDESC_OFF_G1
+ENUMDOC
+ AArch64 TLS DESC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
+ENUMDOC
+ Unsigned 12 bit byte offset to global offset table entry for a symbols
+ tls_index structure. Used in conjunction with
+ BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
+ENUM
+ BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
+ENUMDOC
+ Get to the page base of the global offset table entry for a symbols
+ tls_index structure as part of an adrp instruction using a 21 bit PC
+ relative value. Used in conjunction with
+ BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
+ENUM
+ BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
+ENUMDOC
+ AArch64 TLS INITIAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
+ENUMDOC
+ AArch64 TLS INITIAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
+ENUMDOC
+ AArch64 TLS INITIAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
+ENUMDOC
+ AArch64 TLS INITIAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
+ENUMDOC
+ AArch64 TLS INITIAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
+ENUMDOC
+ AArch64 TLS LOCAL EXEC relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLS_DTPMOD64
+ENUMDOC
+ AArch64 TLS relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLS_DTPREL64
+ENUMDOC
+ AArch64 TLS relocation.
+ENUM
+ BFD_RELOC_AARCH64_TLS_TPREL64
+ENUMDOC
+ AArch64 TLS relocation.
+ENUM
+ BFD_RELOC_AARCH64_TSTBR14
+ENUMDOC
+ AArch64 14 bit pc-relative test bit and branch.
+ The lowest two bits must be zero and are not stored in the instruction,
+ giving a 16 bit signed byte offset.
+
+ENUM
+ BFD_RELOC_TILEPRO_COPY
+ENUMX
+ BFD_RELOC_TILEPRO_GLOB_DAT
+ENUMX
+ BFD_RELOC_TILEPRO_JMP_SLOT
+ENUMX
+ BFD_RELOC_TILEPRO_RELATIVE
+ENUMX
+ BFD_RELOC_TILEPRO_BROFF_X1
+ENUMX
+ BFD_RELOC_TILEPRO_JOFFLONG_X1
+ENUMX
+ BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_X0
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_Y0
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_X1
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_Y1
+ENUMX
+ BFD_RELOC_TILEPRO_DEST_IMM8_X1
+ENUMX
+ BFD_RELOC_TILEPRO_MT_IMM15_X1
+ENUMX
+ BFD_RELOC_TILEPRO_MF_IMM15_X1
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_GOT
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_GOT
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
+ENUMX
+ BFD_RELOC_TILEPRO_MMSTART_X0
+ENUMX
+ BFD_RELOC_TILEPRO_MMEND_X0
+ENUMX
+ BFD_RELOC_TILEPRO_MMSTART_X1
+ENUMX
+ BFD_RELOC_TILEPRO_MMEND_X1
+ENUMX
+ BFD_RELOC_TILEPRO_SHAMT_X0
+ENUMX
+ BFD_RELOC_TILEPRO_SHAMT_X1
+ENUMX
+ BFD_RELOC_TILEPRO_SHAMT_Y0
+ENUMX
+ BFD_RELOC_TILEPRO_SHAMT_Y1
+ENUMX
+ BFD_RELOC_TILEPRO_TLS_GD_CALL
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEPRO_TLS_IE_LOAD
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
+ENUMX
+ BFD_RELOC_TILEPRO_TLS_DTPMOD32
+ENUMX
+ BFD_RELOC_TILEPRO_TLS_DTPOFF32
+ENUMX
+ BFD_RELOC_TILEPRO_TLS_TPOFF32
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
+ENUMX
+ BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
+ENUMDOC
+ Tilera TILEPro Relocations.
+ENUM
+ BFD_RELOC_TILEGX_HW0
+ENUMX
+ BFD_RELOC_TILEGX_HW1
+ENUMX
+ BFD_RELOC_TILEGX_HW2
+ENUMX
+ BFD_RELOC_TILEGX_HW3
+ENUMX
+ BFD_RELOC_TILEGX_HW0_LAST
+ENUMX
+ BFD_RELOC_TILEGX_HW1_LAST
+ENUMX
+ BFD_RELOC_TILEGX_HW2_LAST
+ENUMX
+ BFD_RELOC_TILEGX_COPY
+ENUMX
+ BFD_RELOC_TILEGX_GLOB_DAT
+ENUMX
+ BFD_RELOC_TILEGX_JMP_SLOT
+ENUMX
+ BFD_RELOC_TILEGX_RELATIVE
+ENUMX
+ BFD_RELOC_TILEGX_BROFF_X1
+ENUMX
+ BFD_RELOC_TILEGX_JUMPOFF_X1
+ENUMX
+ BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_X0
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_Y0
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_X1
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_Y1
+ENUMX
+ BFD_RELOC_TILEGX_DEST_IMM8_X1
+ENUMX
+ BFD_RELOC_TILEGX_MT_IMM14_X1
+ENUMX
+ BFD_RELOC_TILEGX_MF_IMM14_X1
+ENUMX
+ BFD_RELOC_TILEGX_MMSTART_X0
+ENUMX
+ BFD_RELOC_TILEGX_MMEND_X0
+ENUMX
+ BFD_RELOC_TILEGX_SHAMT_X0
+ENUMX
+ BFD_RELOC_TILEGX_SHAMT_X1
+ENUMX
+ BFD_RELOC_TILEGX_SHAMT_Y0
+ENUMX
+ BFD_RELOC_TILEGX_SHAMT_Y1
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW2
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW2
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW3
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW3
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
+ENUMX
+ BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
+ENUMX
+ BFD_RELOC_TILEGX_TLS_DTPMOD64
+ENUMX
+ BFD_RELOC_TILEGX_TLS_DTPOFF64
+ENUMX
+ BFD_RELOC_TILEGX_TLS_TPOFF64
+ENUMX
+ BFD_RELOC_TILEGX_TLS_DTPMOD32
+ENUMX
+ BFD_RELOC_TILEGX_TLS_DTPOFF32
+ENUMX
+ BFD_RELOC_TILEGX_TLS_TPOFF32
+ENUMX
+ BFD_RELOC_TILEGX_TLS_GD_CALL
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_TILEGX_TLS_IE_LOAD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
+ENUMX
+ BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
+ENUMDOC
+ Tilera TILE-Gx Relocations.
+ENUM
+ BFD_RELOC_EPIPHANY_SIMM8
+ENUMDOC
+ Adapteva EPIPHANY - 8 bit signed pc-relative displacement
+ENUM
+ BFD_RELOC_EPIPHANY_SIMM24
+ENUMDOC
+ Adapteva EPIPHANY - 24 bit signed pc-relative displacement
+ENUM
+ BFD_RELOC_EPIPHANY_HIGH
+ENUMDOC
+ Adapteva EPIPHANY - 16 most-significant bits of absolute address
+ENUM
+ BFD_RELOC_EPIPHANY_LOW
+ENUMDOC
+ Adapteva EPIPHANY - 16 least-significant bits of absolute address
+ENUM
+ BFD_RELOC_EPIPHANY_SIMM11
+ENUMDOC
+ Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
+ENUM
+ BFD_RELOC_EPIPHANY_IMM11
+ENUMDOC
+ Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
+ENUM
+ BFD_RELOC_EPIPHANY_IMM8
+ENUMDOC
+ Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
+
+
+ENDSENUM
+ BFD_RELOC_UNUSED
+CODE_FRAGMENT
+.
+.typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
+*/
+
+/*
+FUNCTION
+ bfd_reloc_type_lookup
+ bfd_reloc_name_lookup
+
+SYNOPSIS
+ reloc_howto_type *bfd_reloc_type_lookup
+ (bfd *abfd, bfd_reloc_code_real_type code);
+ reloc_howto_type *bfd_reloc_name_lookup
+ (bfd *abfd, const char *reloc_name);
+
+DESCRIPTION
+ Return a pointer to a howto structure which, when
+ invoked, will perform the relocation @var{code} on data from the
+ architecture noted.
+
+*/
+
+reloc_howto_type *
+bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
+{
+ return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
+}
+
+reloc_howto_type *
+bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
+{
+ return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
+}
+
+static reloc_howto_type bfd_howto_32 =
+HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
+
+/*
+INTERNAL_FUNCTION
+ bfd_default_reloc_type_lookup
+
+SYNOPSIS
+ reloc_howto_type *bfd_default_reloc_type_lookup
+ (bfd *abfd, bfd_reloc_code_real_type code);
+
+DESCRIPTION
+ Provides a default relocation lookup routine for any architecture.
+
+*/
+
+reloc_howto_type *
+bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
+{
+ switch (code)
+ {
+ case BFD_RELOC_CTOR:
+ /* The type of reloc used in a ctor, which will be as wide as the
+ address - so either a 64, 32, or 16 bitter. */
+ switch (bfd_arch_bits_per_address (abfd))
+ {
+ case 64:
+ BFD_FAIL ();
+ case 32:
+ return &bfd_howto_32;
+ case 16:
+ BFD_FAIL ();
+ default:
+ BFD_FAIL ();
+ }
+ default:
BFD_FAIL ();
}
return NULL;
struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
bfd_boolean *again)
{
+ if (link_info->relocatable)
+ (*link_info->callbacks->einfo)
+ (_("%P%F: --relax and -r may not be used together\n"));
+
*again = FALSE;
return TRUE;
}
return TRUE;
}
+/*
+INTERNAL_FUNCTION
+ bfd_generic_lookup_section_flags
+
+SYNOPSIS
+ bfd_boolean bfd_generic_lookup_section_flags
+ (struct bfd_link_info *, struct flag_info *, asection *);
+
+DESCRIPTION
+ Provides default handling for section flags lookup
+ -- i.e., does nothing.
+ Returns FALSE if the section should be omitted, otherwise TRUE.
+*/
+
+bfd_boolean
+bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
+ struct flag_info *flaginfo,
+ asection *section ATTRIBUTE_UNUSED)
+{
+ if (flaginfo != NULL)
+ {
+ (*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
+ return FALSE;
+ }
+ return TRUE;
+}
+
/*
INTERNAL_FUNCTION
bfd_generic_merge_sections
long reloc_size;
arelent **reloc_vector;
long reloc_count;
- bfd_size_type sz;
reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
if (reloc_size < 0)
return NULL;
/* Read in the section. */
- sz = input_section->rawsize ? input_section->rawsize : input_section->size;
- if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
+ if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
return NULL;
if (reloc_size == 0)
return data;
- reloc_vector = bfd_malloc (reloc_size);
+ reloc_vector = (arelent **) bfd_malloc (reloc_size);
if (reloc_vector == NULL)
return NULL;
bfd_reloc_status_type r;
symbol = *(*parent)->sym_ptr_ptr;
- if (symbol->section && elf_discarded_section (symbol->section))
+ if (symbol->section && discarded_section (symbol->section))
{
bfd_byte *p;
static reloc_howto_type none_howto
"unused", FALSE, 0, 0, FALSE);
p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
- _bfd_clear_contents ((*parent)->howto, input_bfd, p);
- (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
+ _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
+ p);
+ (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
(*parent)->addend = 0;
(*parent)->howto = &none_howto;
r = bfd_reloc_ok;
goto error_return;
break;
case bfd_reloc_outofrange:
+ /* PR ld/13730:
+ This error can result when processing some partially
+ complete binaries. Do not abort, but issue an error
+ message instead. */
+ link_info->callbacks->einfo
+ (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
+ abfd, input_section, * parent);
+ goto error_return;
+
default:
abort ();
break;