/* BFD support for handling relocation entries.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003
+ 2000, 2001, 2002, 2003, 2004
Free Software Foundation, Inc.
Written by Cygnus Support.
.typedef struct reloc_cache_entry
.{
. {* A pointer into the canonical table of pointers. *}
-. struct symbol_cache_entry **sym_ptr_ptr;
+. struct bfd_symbol **sym_ptr_ptr;
.
. {* offset in section. *}
. bfd_size_type address;
o <<sym_ptr_ptr>>
The symbol table pointer points to a pointer to the symbol
- associated with the relocation request. It is
- the pointer into the table returned by the back end's
- <<get_symtab>> action. @xref{Symbols}. The symbol is referenced
- through a pointer to a pointer so that tools like the linker
- can fix up all the symbols of the same name by modifying only
- one pointer. The relocation routine looks in the symbol and
- uses the base of the section the symbol is attached to and the
- value of the symbol as the initial relocation offset. If the
- symbol pointer is zero, then the section provided is looked up.
+ associated with the relocation request. It is the pointer
+ into the table returned by the back end's
+ <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
+ referenced through a pointer to a pointer so that tools like
+ the linker can fix up all the symbols of the same name by
+ modifying only one pointer. The relocation routine looks in
+ the symbol and uses the base of the section the symbol is
+ attached to and the value of the symbol as the initial
+ relocation offset. If the symbol pointer is zero, then the
+ section provided is looked up.
o <<address>>
information that libbfd needs to know to tie up a back end's data.
CODE_FRAGMENT
-.struct symbol_cache_entry; {* Forward declaration. *}
+.struct bfd_symbol; {* Forward declaration. *}
.
.struct reloc_howto_struct
.{
.
. {* If this field is non null, then the supplied function is
. called rather than the normal function. This allows really
-. strange relocation methods to be accomodated (e.g., i960 callj
+. strange relocation methods to be accommodated (e.g., i960 callj
. instructions). *}
. bfd_reloc_status_type (*special_function)
-. (bfd *, arelent *, struct symbol_cache_entry *, void *, asection *,
+. (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
. bfd *, char **);
.
. {* The textual name of the relocation type. *}
/ bfd_octets_per_byte (abfd)))
return bfd_reloc_outofrange;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
/ bfd_octets_per_byte (abfd)))
return bfd_reloc_outofrange;
- /* Work out which section the relocation is targetted at and the
+ /* Work out which section the relocation is targeted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
The 24-bit relocation is used in some Intel 960 configurations.
+ENUM
+ BFD_RELOC_32_SECREL
+ENUMDOC
+ Section relative relocations. Some targets need this for DWARF2.
+
ENUM
BFD_RELOC_32_GOT_PCREL
ENUMX
BFD_RELOC_MIPS_RELGOT
ENUMX
BFD_RELOC_MIPS_JALR
+ENUMDOC
+ MIPS ELF relocations.
COMMENT
+
ENUM
BFD_RELOC_FRV_LABEL16
ENUMX
BFD_RELOC_FRV_GPRELHI
ENUMX
BFD_RELOC_FRV_GPRELLO
+ENUMX
+ BFD_RELOC_FRV_GOT12
+ENUMX
+ BFD_RELOC_FRV_GOTHI
+ENUMX
+ BFD_RELOC_FRV_GOTLO
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_GOT12
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_GOTHI
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_GOTLO
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_VALUE
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_GOTOFF12
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
+ENUMX
+ BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
+ENUMX
+ BFD_RELOC_FRV_GOTOFF12
+ENUMX
+ BFD_RELOC_FRV_GOTOFFHI
+ENUMX
+ BFD_RELOC_FRV_GOTOFFLO
ENUMDOC
Fujitsu Frv Relocations.
COMMENT
-COMMENT
-ENUMDOC
- MIPS ELF relocations.
+ENUM
+ BFD_RELOC_MN10300_GOTOFF24
+ENUMDOC
+ This is a 24bit GOT-relative reloc for the mn10300.
+ENUM
+ BFD_RELOC_MN10300_GOT32
+ENUMDOC
+ This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
+ in the instruction.
+ENUM
+ BFD_RELOC_MN10300_GOT24
+ENUMDOC
+ This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
+ in the instruction.
+ENUM
+ BFD_RELOC_MN10300_GOT16
+ENUMDOC
+ This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
+ in the instruction.
+ENUM
+ BFD_RELOC_MN10300_COPY
+ENUMDOC
+ Copy symbol at runtime.
+ENUM
+ BFD_RELOC_MN10300_GLOB_DAT
+ENUMDOC
+ Create GOT entry.
+ENUM
+ BFD_RELOC_MN10300_JMP_SLOT
+ENUMDOC
+ Create PLT entry.
+ENUM
+ BFD_RELOC_MN10300_RELATIVE
+ENUMDOC
+ Adjust by program base.
COMMENT
ENUM
ENUM
BFD_RELOC_CTOR
ENUMDOC
- The type of reloc used to build a contructor table - at the moment
+ The type of reloc used to build a constructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
It generally does map to one of the other relocation types.
ENUMDOC
This is a 16-bit reloc containing the small data area offset for use in
add3, load, and store instructions.
+ENUM
+ BFD_RELOC_M32R_GOT24
+ENUMX
+ BFD_RELOC_M32R_26_PLTREL
+ENUMX
+ BFD_RELOC_M32R_COPY
+ENUMX
+ BFD_RELOC_M32R_GLOB_DAT
+ENUMX
+ BFD_RELOC_M32R_JMP_SLOT
+ENUMX
+ BFD_RELOC_M32R_RELATIVE
+ENUMX
+ BFD_RELOC_M32R_GOTOFF
+ENUMX
+ BFD_RELOC_M32R_GOTPC24
+ENUMX
+ BFD_RELOC_M32R_GOT16_HI_ULO
+ENUMX
+ BFD_RELOC_M32R_GOT16_HI_SLO
+ENUMX
+ BFD_RELOC_M32R_GOT16_LO
+ENUMX
+ BFD_RELOC_M32R_GOTPC_HI_ULO
+ENUMX
+ BFD_RELOC_M32R_GOTPC_HI_SLO
+ENUMX
+ BFD_RELOC_M32R_GOTPC_LO
+ENUMDOC
+ For PIC.
+
ENUM
BFD_RELOC_V850_9_PCREL
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
ENUMDOC
This is a 16 bit offset from the short data area pointer, with the
- bits placed non-contigously in the instruction.
+ bits placed non-contiguously in the instruction.
ENUM
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
ENUMDOC
This is a 16 bit offset from the zero data area pointer, with the
- bits placed non-contigously in the instruction.
+ bits placed non-contiguously in the instruction.
ENUM
BFD_RELOC_V850_CALLT_6_7_OFFSET
ENUMDOC
BFD_RELOC_MMIX_PUSHJ_2
ENUMX
BFD_RELOC_MMIX_PUSHJ_3
+ENUMX
+ BFD_RELOC_MMIX_PUSHJ_STUBBABLE
ENUMDOC
These are relocations for the PUSHJ instruction.
ENUM
ENUMDOC
s390 tls relocations.
+ENUM
+ BFD_RELOC_390_20
+ENUMX
+ BFD_RELOC_390_GOT20
+ENUMX
+ BFD_RELOC_390_GOTPLT20
+ENUMX
+ BFD_RELOC_390_TLS_GOTIE20
+ENUMDOC
+ Long displacement extension.
+
ENUM
BFD_RELOC_IP2K_FR9
ENUMDOC
included in the output.
VTABLE_INHERIT is a zero-space relocation used to describe to the
- linker the inheritence tree of a C++ virtual function table. The
+ linker the inheritance tree of a C++ virtual function table. The
relocation's symbol should be the parent class' vtable, and the
relocation should be located at the child vtable.
Motorola 68HC11 reloc.
This reloc marks the beginning of a jump/call instruction.
It is used for linker relaxation to correctly identify beginning
- of instruction and change some branchs to use PC-relative
+ of instruction and change some branches to use PC-relative
addressing mode.
ENUM
BFD_RELOC_M68HC11_RL_GROUP
This is a 24-bit reloc that represents the address with a 16-bit
value and a 8-bit page number. The symbol address is transformed
to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
+ENUM
+ BFD_RELOC_M68HC12_5B
+ENUMDOC
+ Motorola 68HC12 reloc.
+ This is the 5 bits of a value.
+
+ENUM
+ BFD_RELOC_16C_NUM08
+ENUMX
+ BFD_RELOC_16C_NUM08_C
+ENUMX
+ BFD_RELOC_16C_NUM16
+ENUMX
+ BFD_RELOC_16C_NUM16_C
+ENUMX
+ BFD_RELOC_16C_NUM32
+ENUMX
+ BFD_RELOC_16C_NUM32_C
+ENUMX
+ BFD_RELOC_16C_DISP04
+ENUMX
+ BFD_RELOC_16C_DISP04_C
+ENUMX
+ BFD_RELOC_16C_DISP08
+ENUMX
+ BFD_RELOC_16C_DISP08_C
+ENUMX
+ BFD_RELOC_16C_DISP16
+ENUMX
+ BFD_RELOC_16C_DISP16_C
+ENUMX
+ BFD_RELOC_16C_DISP24
+ENUMX
+ BFD_RELOC_16C_DISP24_C
+ENUMX
+ BFD_RELOC_16C_DISP24a
+ENUMX
+ BFD_RELOC_16C_DISP24a_C
+ENUMX
+ BFD_RELOC_16C_REG04
+ENUMX
+ BFD_RELOC_16C_REG04_C
+ENUMX
+ BFD_RELOC_16C_REG04a
+ENUMX
+ BFD_RELOC_16C_REG04a_C
+ENUMX
+ BFD_RELOC_16C_REG14
+ENUMX
+ BFD_RELOC_16C_REG14_C
+ENUMX
+ BFD_RELOC_16C_REG16
+ENUMX
+ BFD_RELOC_16C_REG16_C
+ENUMX
+ BFD_RELOC_16C_REG20
+ENUMX
+ BFD_RELOC_16C_REG20_C
+ENUMX
+ BFD_RELOC_16C_ABS20
+ENUMX
+ BFD_RELOC_16C_ABS20_C
+ENUMX
+ BFD_RELOC_16C_ABS24
+ENUMX
+ BFD_RELOC_16C_ABS24_C
+ENUMX
+ BFD_RELOC_16C_IMM04
+ENUMX
+ BFD_RELOC_16C_IMM04_C
+ENUMX
+ BFD_RELOC_16C_IMM16
+ENUMX
+ BFD_RELOC_16C_IMM16_C
+ENUMX
+ BFD_RELOC_16C_IMM20
+ENUMX
+ BFD_RELOC_16C_IMM20_C
+ENUMX
+ BFD_RELOC_16C_IMM24
+ENUMX
+ BFD_RELOC_16C_IMM24_C
+ENUMX
+ BFD_RELOC_16C_IMM32
+ENUMX
+ BFD_RELOC_16C_IMM32_C
+ENUMDOC
+ NS CR16C Relocations.
ENUM
BFD_RELOC_CRIS_BDISP8
DESCRIPTION
Provides default handling for relaxing for back ends which
- don't do relaxing -- i.e., does nothing.
+ don't do relaxing -- i.e., does nothing except make sure that the
+ final size of the section is set.
*/
bfd_boolean
struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
bfd_boolean *again)
{
+ /* We're not relaxing the section, so just copy the size info if it's
+ zero. Someone else, like bfd_merge_sections, might have set it, so
+ don't overwrite a non-zero value. */
+ if (section->_cooked_size == 0)
+ section->_cooked_size = section->_raw_size;
*again = FALSE;
return TRUE;
}
input_section->_raw_size))
goto error_return;
- /* We're not relaxing the section, so just copy the size info. */
- input_section->_cooked_size = input_section->_raw_size;
+ /* Don't set input_section->_cooked_size here. The caller has set
+ _cooked_size or called bfd_relax_section, which sets _cooked_size.
+ Despite using this generic relocation function, some targets perform
+ target-specific relaxation or string merging, which happens before
+ this function is called. We do not want to clobber the _cooked_size
+ they computed. */
+
input_section->reloc_done = TRUE;
reloc_count = bfd_canonicalize_reloc (input_bfd,
projects / deliverable / binutils-gdb.git / blobdiff