reloc_target_output_section = symbol->section->output_section;
/* Convert input-section-relative symbol value to absolute. */
- if (output_bfd && howto->partial_inplace == false)
+ if (output_bfd && ! howto->partial_inplace)
output_base = 0;
else
output_base = reloc_target_output_section->vma;
/* Here the variable relocation holds the final address of the
symbol we are relocating against, plus any addend. */
- if (howto->pc_relative == true)
+ if (howto->pc_relative)
{
/* This is a PC relative relocation. We want to set RELOCATION
to the distance between the address of the symbol and the
relocation -=
input_section->output_section->vma + input_section->output_offset;
- if (howto->pcrel_offset == true)
+ if (howto->pcrel_offset)
relocation -= reloc_entry->address;
}
if (output_bfd != (bfd *) NULL)
{
- if (howto->partial_inplace == false)
+ if (! howto->partial_inplace)
{
/* This is a partial relocation, and we want to apply the relocation
to the reloc entry rather than the raw data. Modify the reloc
reloc_target_output_section = symbol->section->output_section;
/* Convert input-section-relative symbol value to absolute. */
- if (howto->partial_inplace == false)
+ if (! howto->partial_inplace)
output_base = 0;
else
output_base = reloc_target_output_section->vma;
/* Here the variable relocation holds the final address of the
symbol we are relocating against, plus any addend. */
- if (howto->pc_relative == true)
+ if (howto->pc_relative)
{
/* This is a PC relative relocation. We want to set RELOCATION
to the distance between the address of the symbol and the
relocation -=
input_section->output_section->vma + input_section->output_offset;
- if (howto->pcrel_offset == true && howto->partial_inplace == true)
+ if (howto->pcrel_offset && howto->partial_inplace)
relocation -= reloc_entry->address;
}
- if (howto->partial_inplace == false)
+ if (! howto->partial_inplace)
{
/* This is a partial relocation, and we want to apply the relocation
to the reloc entry rather than the raw data. Modify the reloc
ENUMX
BFD_RELOC_MIPS_JALR
COMMENT
+ENUM
+ BFD_RELOC_FRV_LABEL16
+ENUMX
+ BFD_RELOC_FRV_LABEL24
+ENUMX
+ BFD_RELOC_FRV_LO16
+ENUMX
+ BFD_RELOC_FRV_HI16
+ENUMX
+ BFD_RELOC_FRV_GPREL12
+ENUMX
+ BFD_RELOC_FRV_GPRELU12
+ENUMX
+ BFD_RELOC_FRV_GPREL32
+ENUMX
+ BFD_RELOC_FRV_GPRELHI
+ENUMX
+ BFD_RELOC_FRV_GPRELLO
+ENUMDOC
+ Fujitsu Frv Relocations.
+COMMENT
COMMENT
ENUMDOC
MIPS ELF relocations.
ENUMDOC
32 bit rel. offset to GOT entry.
+ENUM
+ BFD_RELOC_IP2K_FR9
+ENUMDOC
+ Scenix IP2K - 9-bit register number / data address
+ENUM
+ BFD_RELOC_IP2K_BANK
+ENUMDOC
+ Scenix IP2K - 4-bit register/data bank number
+ENUM
+ BFD_RELOC_IP2K_ADDR16CJP
+ENUMDOC
+ Scenix IP2K - low 13 bits of instruction word address
+ENUM
+ BFD_RELOC_IP2K_PAGE3
+ENUMDOC
+ Scenix IP2K - high 3 bits of instruction word address
+ENUM
+ BFD_RELOC_IP2K_LO8DATA
+ENUMX
+ BFD_RELOC_IP2K_HI8DATA
+ENUMX
+ BFD_RELOC_IP2K_EX8DATA
+ENUMDOC
+ Scenix IP2K - ext/low/high 8 bits of data address
+ENUM
+ BFD_RELOC_IP2K_LO8INSN
+ENUMX
+ BFD_RELOC_IP2K_HI8INSN
+ENUMDOC
+ Scenix IP2K - low/high 8 bits of instruction word address
+ENUM
+ BFD_RELOC_IP2K_PC_SKIP
+ENUMDOC
+ Scenix IP2K - even/odd PC modifier to modify snb pcl.0
+ENUM
+ BFD_RELOC_IP2K_TEXT
+ENUMDOC
+ Scenix IP2K - 16 bit word address in text section.
+ENUM
+ BFD_RELOC_IP2K_FR_OFFSET
+ENUMDOC
+ Scenix IP2K - 7-bit sp or dp offset
+ENUM
+ BFD_RELOC_VPE4KMATH_DATA
+ENUMX
+ BFD_RELOC_VPE4KMATH_INSN
+ENUMDOC
+ Scenix VPE4K coprocessor - data/insn-space addressing
+
ENUM
BFD_RELOC_VTABLE_INHERIT
ENUMX
BFD_RELOC_M68HC11_HI8
ENUMDOC
Motorola 68HC11 reloc.
- This is the 8 bits high part of an absolute address.
+ This is the 8 bit high part of an absolute address.
ENUM
BFD_RELOC_M68HC11_LO8
ENUMDOC
Motorola 68HC11 reloc.
- This is the 8 bits low part of an absolute address.
+ This is the 8 bit low part of an absolute address.
ENUM
BFD_RELOC_M68HC11_3B
ENUMDOC
Motorola 68HC11 reloc.
- This is the 3 bits of a value.
+ This is the 3 bit of a value.
+ENUM
+ BFD_RELOC_M68HC11_RL_JUMP
+ENUMDOC
+ Motorola 68HC11 reloc.
+ This reloc marks the beginning of a jump/call instruction.
+ It is used for linker relaxation to correctly identify beginning
+ of instruction and change some branchs to use PC-relative
+ addressing mode.
+ENUM
+ BFD_RELOC_M68HC11_RL_GROUP
+ENUMDOC
+ Motorola 68HC11 reloc.
+ This reloc marks a group of several instructions that gcc generates
+ and for which the linker relaxation pass can modify and/or remove
+ some of them.
+ENUM
+ BFD_RELOC_M68HC11_LO16
+ENUMDOC
+ Motorola 68HC11 reloc.
+ This is the 16-bit lower part of an address. It is used for 'call'
+ instruction to specify the symbol address without any special
+ transformation (due to memory bank window).
+ENUM
+ BFD_RELOC_M68HC11_PAGE
+ENUMDOC
+ Motorola 68HC11 reloc.
+ This is a 8-bit reloc that specifies the page number of an address.
+ It is used by 'call' instruction to specify the page number of
+ the symbol.
+ENUM
+ BFD_RELOC_M68HC11_24
+ENUMDOC
+ Motorola 68HC11 reloc.
+ This is a 24-bit reloc that represents the address with a 16-bit
+ value and a 8-bit page number. The symbol address is transformed
+ to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
ENUM
BFD_RELOC_CRIS_BDISP8