/* BFD support for handling relocation entries.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002
+ 2000, 2001, 2002, 2003
Free Software Foundation, Inc.
Written by Cygnus Support.
. strange relocation methods to be accomodated (e.g., i960 callj
. instructions). *}
. bfd_reloc_status_type (*special_function)
-. PARAMS ((bfd *, arelent *, struct symbol_cache_entry *, PTR, asection *,
-. bfd *, char **));
+. (bfd *, arelent *, struct symbol_cache_entry *, void *, asection *,
+. bfd *, char **);
.
. {* The textual name of the relocation type. *}
. char *name;
. links (e.g. GOT stuff) it doesn't matter what this is set to. *}
. bfd_boolean partial_inplace;
.
-. {* The src_mask selects which parts of the read in data
-. are to be used in the relocation sum. E.g., if this was an 8 bit
-. byte of data which we read and relocated, this would be
-. 0x000000ff. When we have relocs which have an addend, such as
-. sun4 extended relocs, the value in the offset part of a
-. relocating field is garbage so we never use it. In this case
-. the mask would be 0x00000000. *}
+. {* src_mask selects the part of the instruction (or data) to be used
+. in the relocation sum. If the target relocations don't have an
+. addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
+. dst_mask to extract the addend from the section contents. If
+. relocations do have an addend in the reloc, eg. ELF USE_RELA, this
+. field should be zero. Non-zero values for ELF USE_RELA targets are
+. bogus as in those cases the value in the dst_mask part of the
+. section contents should be treated as garbage. *}
. bfd_vma src_mask;
.
-. {* The dst_mask selects which parts of the instruction are replaced
-. into the instruction. In most cases src_mask == dst_mask,
-. except in the above special case, where dst_mask would be
-. 0x000000ff, and src_mask would be 0x00000000. *}
+. {* dst_mask selects which parts of the instruction (or data) are
+. replaced with a relocated value. *}
. bfd_vma dst_mask;
.
. {* When some formats create PC relative instructions, they leave
.#define HOWTO_PREPARE(relocation, symbol) \
. { \
-. if (symbol != (asymbol *) NULL) \
+. if (symbol != NULL) \
. { \
. if (bfd_is_com_section (symbol->section)) \
. { \
*/
unsigned int
-bfd_get_reloc_size (howto)
- reloc_howto_type *howto;
+bfd_get_reloc_size (reloc_howto_type *howto)
{
switch (howto->size)
{
bfd_check_overflow
SYNOPSIS
- bfd_reloc_status_type
- bfd_check_overflow
- (enum complain_overflow how,
- unsigned int bitsize,
- unsigned int rightshift,
- unsigned int addrsize,
- bfd_vma relocation);
+ bfd_reloc_status_type bfd_check_overflow
+ (enum complain_overflow how,
+ unsigned int bitsize,
+ unsigned int rightshift,
+ unsigned int addrsize,
+ bfd_vma relocation);
DESCRIPTION
Perform overflow checking on @var{relocation} which has
*/
bfd_reloc_status_type
-bfd_check_overflow (how, bitsize, rightshift, addrsize, relocation)
- enum complain_overflow how;
- unsigned int bitsize;
- unsigned int rightshift;
- unsigned int addrsize;
- bfd_vma relocation;
+bfd_check_overflow (enum complain_overflow how,
+ unsigned int bitsize,
+ unsigned int rightshift,
+ unsigned int addrsize,
+ bfd_vma relocation)
{
bfd_vma fieldmask, addrmask, signmask, ss, a;
bfd_reloc_status_type flag = bfd_reloc_ok;
bfd_perform_relocation
SYNOPSIS
- bfd_reloc_status_type
- bfd_perform_relocation
- (bfd *abfd,
- arelent *reloc_entry,
- PTR data,
- asection *input_section,
- bfd *output_bfd,
- char **error_message);
+ bfd_reloc_status_type bfd_perform_relocation
+ (bfd *abfd,
+ arelent *reloc_entry,
+ void *data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message);
DESCRIPTION
If @var{output_bfd} is supplied to this function, the
*/
bfd_reloc_status_type
-bfd_perform_relocation (abfd, reloc_entry, data, input_section, output_bfd,
- error_message)
- bfd *abfd;
- arelent *reloc_entry;
- PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+bfd_perform_relocation (bfd *abfd,
+ arelent *reloc_entry,
+ void *data,
+ asection *input_section,
+ bfd *output_bfd,
+ char **error_message)
{
bfd_vma relocation;
bfd_reloc_status_type flag = bfd_reloc_ok;
symbol = *(reloc_entry->sym_ptr_ptr);
if (bfd_is_abs_section (symbol->section)
- && output_bfd != (bfd *) NULL)
+ && output_bfd != NULL)
{
reloc_entry->address += input_section->output_offset;
return bfd_reloc_ok;
}
- /* If we are not producing relocateable output, return an error if
+ /* If we are not producing relocatable output, return an error if
the symbol is not defined. An undefined weak symbol is
considered to have a value of zero (SVR4 ABI, p. 4-27). */
if (bfd_is_und_section (symbol->section)
&& (symbol->flags & BSF_WEAK) == 0
- && output_bfd == (bfd *) NULL)
+ && output_bfd == NULL)
flag = bfd_reloc_undefined;
/* If there is a function supplied to handle this relocation type,
include the position of the location; for example, m88kbcs,
or ELF. For those targets, pcrel_offset is TRUE.
- If we are producing relocateable output, then we must ensure
+ If we are producing relocatable output, then we must ensure
that this reloc will be correctly computed when the final
relocation is done. If pcrel_offset is FALSE we want to wind
up with the negative of the location within the section,
we do not want to adjust the existing addend at all.
FIXME: This seems logical to me, but for the case of
- producing relocateable output it is not what the code
+ producing relocatable output it is not what the code
actually does. I don't want to change it, because it seems
far too likely that something will break. */
relocation -= reloc_entry->address;
}
- if (output_bfd != (bfd *) NULL)
+ if (output_bfd != NULL)
{
if (! howto->partial_inplace)
{
not have any tests that depend upon the flavour. It's seem like
entirely the wrong place for such a thing. The second obvious point
is that the current code ignores the reloc addend when producing
-relocateable output for COFF. That's peculiar. In fact, I really
+relocatable output for COFF. That's peculiar. In fact, I really
have no idea what the point of the line you want to remove is.
A typical COFF reloc subtracts the old value of the symbol and adds in
compatibility with old object files) (coff-i386 does subtract the old
value, to be compatible with existing coff-i386 targets, like SCO).
-So everything works fine when not producing relocateable output. When
-we are producing relocateable output, logically we should do exactly
-what we do when not producing relocateable output. Therefore, your
+So everything works fine when not producing relocatable output. When
+we are producing relocatable output, logically we should do exactly
+what we do when not producing relocatable output. Therefore, your
patch is correct. In fact, it should probably always just set
reloc_entry->addend to 0 for all cases, since it is, in fact, going to
add the value into the object file. This won't hurt the COFF code,
formats (the thing to check for would be whether any formats both use
the addend and set partial_inplace).
-When I wanted to make coff-i386 produce relocateable output, I ran
+When I wanted to make coff-i386 produce relocatable output, I ran
into the problem that you are running into: I wanted to remove that
line. Rather than risk it, I made the coff-i386 relocs use a special
function; it's coff_i386_reloc in coff-i386.c. The function
bfd_install_relocation
SYNOPSIS
- bfd_reloc_status_type
- bfd_install_relocation
- (bfd *abfd,
- arelent *reloc_entry,
- PTR data, bfd_vma data_start,
- asection *input_section,
- char **error_message);
+ bfd_reloc_status_type bfd_install_relocation
+ (bfd *abfd,
+ arelent *reloc_entry,
+ void *data, bfd_vma data_start,
+ asection *input_section,
+ char **error_message);
DESCRIPTION
This looks remarkably like <<bfd_perform_relocation>>, except it
*/
bfd_reloc_status_type
-bfd_install_relocation (abfd, reloc_entry, data_start, data_start_offset,
- input_section, error_message)
- bfd *abfd;
- arelent *reloc_entry;
- PTR data_start;
- bfd_vma data_start_offset;
- asection *input_section;
- char **error_message;
+bfd_install_relocation (bfd *abfd,
+ arelent *reloc_entry,
+ void *data_start,
+ bfd_vma data_start_offset,
+ asection *input_section,
+ char **error_message)
{
bfd_vma relocation;
bfd_reloc_status_type flag = bfd_reloc_ok;
include the position of the location; for example, m88kbcs,
or ELF. For those targets, pcrel_offset is TRUE.
- If we are producing relocateable output, then we must ensure
+ If we are producing relocatable output, then we must ensure
that this reloc will be correctly computed when the final
relocation is done. If pcrel_offset is FALSE we want to wind
up with the negative of the location within the section,
we do not want to adjust the existing addend at all.
FIXME: This seems logical to me, but for the case of
- producing relocateable output it is not what the code
+ producing relocatable output it is not what the code
actually does. I don't want to change it, because it seems
far too likely that something will break. */
not have any tests that depend upon the flavour. It's seem like
entirely the wrong place for such a thing. The second obvious point
is that the current code ignores the reloc addend when producing
-relocateable output for COFF. That's peculiar. In fact, I really
+relocatable output for COFF. That's peculiar. In fact, I really
have no idea what the point of the line you want to remove is.
A typical COFF reloc subtracts the old value of the symbol and adds in
compatibility with old object files) (coff-i386 does subtract the old
value, to be compatible with existing coff-i386 targets, like SCO).
-So everything works fine when not producing relocateable output. When
-we are producing relocateable output, logically we should do exactly
-what we do when not producing relocateable output. Therefore, your
+So everything works fine when not producing relocatable output. When
+we are producing relocatable output, logically we should do exactly
+what we do when not producing relocatable output. Therefore, your
patch is correct. In fact, it should probably always just set
reloc_entry->addend to 0 for all cases, since it is, in fact, going to
add the value into the object file. This won't hurt the COFF code,
formats (the thing to check for would be whether any formats both use
the addend and set partial_inplace).
-When I wanted to make coff-i386 produce relocateable output, I ran
+When I wanted to make coff-i386 produce relocatable output, I ran
into the problem that you are running into: I wanted to remove that
line. Rather than risk it, I made the coff-i386 relocs use a special
function; it's coff_i386_reloc in coff-i386.c. The function
{
case 0:
{
- char x = bfd_get_8 (abfd, (char *) data);
+ char x = bfd_get_8 (abfd, data);
DOIT (x);
- bfd_put_8 (abfd, x, (unsigned char *) data);
+ bfd_put_8 (abfd, x, data);
}
break;
case 1:
{
- short x = bfd_get_16 (abfd, (bfd_byte *) data);
+ short x = bfd_get_16 (abfd, data);
DOIT (x);
- bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data);
+ bfd_put_16 (abfd, (bfd_vma) x, data);
}
break;
case 2:
{
- long x = bfd_get_32 (abfd, (bfd_byte *) data);
+ long x = bfd_get_32 (abfd, data);
DOIT (x);
- bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data);
+ bfd_put_32 (abfd, (bfd_vma) x, data);
}
break;
case -2:
{
- long x = bfd_get_32 (abfd, (bfd_byte *) data);
+ long x = bfd_get_32 (abfd, data);
relocation = -relocation;
DOIT (x);
- bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data);
+ bfd_put_32 (abfd, (bfd_vma) x, data);
}
break;
case 4:
{
- bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data);
+ bfd_vma x = bfd_get_64 (abfd, data);
DOIT (x);
- bfd_put_64 (abfd, x, (bfd_byte *) data);
+ bfd_put_64 (abfd, x, data);
}
break;
default:
function than to try to deal with it.
This routine does a final relocation. Whether it is useful for a
- relocateable link depends upon how the object format defines
+ relocatable link depends upon how the object format defines
relocations.
FIXME: This routine ignores any special_function in the HOWTO,
ADDEND is the addend of the reloc. */
bfd_reloc_status_type
-_bfd_final_link_relocate (howto, input_bfd, input_section, contents, address,
- value, addend)
- reloc_howto_type *howto;
- bfd *input_bfd;
- asection *input_section;
- bfd_byte *contents;
- bfd_vma address;
- bfd_vma value;
- bfd_vma addend;
+_bfd_final_link_relocate (reloc_howto_type *howto,
+ bfd *input_bfd,
+ asection *input_section,
+ bfd_byte *contents,
+ bfd_vma address,
+ bfd_vma value,
+ bfd_vma addend)
{
bfd_vma relocation;
/* Relocate a given location using a given value and howto. */
bfd_reloc_status_type
-_bfd_relocate_contents (howto, input_bfd, relocation, location)
- reloc_howto_type *howto;
- bfd *input_bfd;
- bfd_vma relocation;
- bfd_byte *location;
+_bfd_relocate_contents (reloc_howto_type *howto,
+ bfd *input_bfd,
+ bfd_vma relocation,
+ bfd_byte *location)
{
int size;
bfd_vma x = 0;
BFD_RELOC_SPARC_REV32
ENUMDOC
SPARC little endian relocation
+ENUM
+ BFD_RELOC_SPARC_TLS_GD_HI22
+ENUMX
+ BFD_RELOC_SPARC_TLS_GD_LO10
+ENUMX
+ BFD_RELOC_SPARC_TLS_GD_ADD
+ENUMX
+ BFD_RELOC_SPARC_TLS_GD_CALL
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDM_HI22
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDM_LO10
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDM_ADD
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDM_CALL
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDO_HIX22
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDO_LOX10
+ENUMX
+ BFD_RELOC_SPARC_TLS_LDO_ADD
+ENUMX
+ BFD_RELOC_SPARC_TLS_IE_HI22
+ENUMX
+ BFD_RELOC_SPARC_TLS_IE_LO10
+ENUMX
+ BFD_RELOC_SPARC_TLS_IE_LD
+ENUMX
+ BFD_RELOC_SPARC_TLS_IE_LDX
+ENUMX
+ BFD_RELOC_SPARC_TLS_IE_ADD
+ENUMX
+ BFD_RELOC_SPARC_TLS_LE_HIX22
+ENUMX
+ BFD_RELOC_SPARC_TLS_LE_LOX10
+ENUMX
+ BFD_RELOC_SPARC_TLS_DTPMOD32
+ENUMX
+ BFD_RELOC_SPARC_TLS_DTPMOD64
+ENUMX
+ BFD_RELOC_SPARC_TLS_DTPOFF32
+ENUMX
+ BFD_RELOC_SPARC_TLS_DTPOFF64
+ENUMX
+ BFD_RELOC_SPARC_TLS_TPOFF32
+ENUMX
+ BFD_RELOC_SPARC_TLS_TPOFF64
+ENUMDOC
+ SPARC TLS relocations
ENUM
BFD_RELOC_ALPHA_GPDISP_HI16
ENUMDOC
Power(rs6000) and PowerPC relocations.
+ENUM
+ BFD_RELOC_PPC_TLS
+ENUMX
+ BFD_RELOC_PPC_DTPMOD
+ENUMX
+ BFD_RELOC_PPC_TPREL16
+ENUMX
+ BFD_RELOC_PPC_TPREL16_LO
+ENUMX
+ BFD_RELOC_PPC_TPREL16_HI
+ENUMX
+ BFD_RELOC_PPC_TPREL16_HA
+ENUMX
+ BFD_RELOC_PPC_TPREL
+ENUMX
+ BFD_RELOC_PPC_DTPREL16
+ENUMX
+ BFD_RELOC_PPC_DTPREL16_LO
+ENUMX
+ BFD_RELOC_PPC_DTPREL16_HI
+ENUMX
+ BFD_RELOC_PPC_DTPREL16_HA
+ENUMX
+ BFD_RELOC_PPC_DTPREL
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSGD16
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSGD16_LO
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSGD16_HI
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSGD16_HA
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSLD16
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSLD16_LO
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSLD16_HI
+ENUMX
+ BFD_RELOC_PPC_GOT_TLSLD16_HA
+ENUMX
+ BFD_RELOC_PPC_GOT_TPREL16
+ENUMX
+ BFD_RELOC_PPC_GOT_TPREL16_LO
+ENUMX
+ BFD_RELOC_PPC_GOT_TPREL16_HI
+ENUMX
+ BFD_RELOC_PPC_GOT_TPREL16_HA
+ENUMX
+ BFD_RELOC_PPC_GOT_DTPREL16
+ENUMX
+ BFD_RELOC_PPC_GOT_DTPREL16_LO
+ENUMX
+ BFD_RELOC_PPC_GOT_DTPREL16_HI
+ENUMX
+ BFD_RELOC_PPC_GOT_DTPREL16_HA
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_DS
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_LO_DS
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGHER
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGHERA
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGHEST
+ENUMX
+ BFD_RELOC_PPC64_TPREL16_HIGHESTA
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_DS
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_LO_DS
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGHER
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGHERA
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGHEST
+ENUMX
+ BFD_RELOC_PPC64_DTPREL16_HIGHESTA
+ENUMDOC
+ PowerPC and PowerPC64 thread-local storage relocations.
+
ENUM
BFD_RELOC_I370_D12
ENUMDOC
BFD_RELOC_ARM_MULTI
ENUMX
BFD_RELOC_ARM_CP_OFF_IMM
+ENUMX
+ BFD_RELOC_ARM_CP_OFF_IMM_S2
ENUMX
BFD_RELOC_ARM_ADR_IMM
ENUMX
ENUMX
BFD_RELOC_SH_TLS_TPOFF32
ENUMDOC
- Hitachi SH relocs. Not all of these appear in object files.
+ Renesas / SuperH SH relocs. Not all of these appear in object files.
ENUM
BFD_RELOC_THUMB_PCREL_BRANCH9
ENUM
BFD_RELOC_M32R_24
ENUMDOC
- Mitsubishi M32R relocs.
+ Renesas M32R (formerly Mitsubishi M32R) relocs.
This is a 24 bit absolute address.
ENUM
BFD_RELOC_M32R_10_PCREL
BFD_RELOC_390_GOTENT
ENUMDOC
32 bit rel. offset to GOT entry.
+ENUM
+ BFD_RELOC_390_GOTOFF64
+ENUMDOC
+ 64 bit offset to GOT.
+ENUM
+ BFD_RELOC_390_GOTPLT12
+ENUMDOC
+ 12-bit offset to symbol-entry within GOT, with PLT handling.
+ENUM
+ BFD_RELOC_390_GOTPLT16
+ENUMDOC
+ 16-bit offset to symbol-entry within GOT, with PLT handling.
+ENUM
+ BFD_RELOC_390_GOTPLT32
+ENUMDOC
+ 32-bit offset to symbol-entry within GOT, with PLT handling.
+ENUM
+ BFD_RELOC_390_GOTPLT64
+ENUMDOC
+ 64-bit offset to symbol-entry within GOT, with PLT handling.
+ENUM
+ BFD_RELOC_390_GOTPLTENT
+ENUMDOC
+ 32-bit rel. offset to symbol-entry within GOT, with PLT handling.
+ENUM
+ BFD_RELOC_390_PLTOFF16
+ENUMDOC
+ 16-bit rel. offset from the GOT to a PLT entry.
+ENUM
+ BFD_RELOC_390_PLTOFF32
+ENUMDOC
+ 32-bit rel. offset from the GOT to a PLT entry.
+ENUM
+ BFD_RELOC_390_PLTOFF64
+ENUMDOC
+ 64-bit rel. offset from the GOT to a PLT entry.
+
+ENUM
+ BFD_RELOC_390_TLS_LOAD
+ENUMX
+ BFD_RELOC_390_TLS_GDCALL
+ENUMX
+ BFD_RELOC_390_TLS_LDCALL
+ENUMX
+ BFD_RELOC_390_TLS_GD32
+ENUMX
+ BFD_RELOC_390_TLS_GD64
+ENUMX
+ BFD_RELOC_390_TLS_GOTIE12
+ENUMX
+ BFD_RELOC_390_TLS_GOTIE32
+ENUMX
+ BFD_RELOC_390_TLS_GOTIE64
+ENUMX
+ BFD_RELOC_390_TLS_LDM32
+ENUMX
+ BFD_RELOC_390_TLS_LDM64
+ENUMX
+ BFD_RELOC_390_TLS_IE32
+ENUMX
+ BFD_RELOC_390_TLS_IE64
+ENUMX
+ BFD_RELOC_390_TLS_IEENT
+ENUMX
+ BFD_RELOC_390_TLS_LE32
+ENUMX
+ BFD_RELOC_390_TLS_LE64
+ENUMX
+ BFD_RELOC_390_TLS_LDO32
+ENUMX
+ BFD_RELOC_390_TLS_LDO64
+ENUMX
+ BFD_RELOC_390_TLS_DTPMOD
+ENUMX
+ BFD_RELOC_390_TLS_DTPOFF
+ENUMX
+ BFD_RELOC_390_TLS_TPOFF
+ENUMDOC
+ s390 tls relocations.
+
+ENUM
+ BFD_RELOC_390_20
+ENUMX
+ BFD_RELOC_390_GOT20
+ENUMX
+ BFD_RELOC_390_GOTPLT20
+ENUMX
+ BFD_RELOC_390_TLS_GOTIE20
+ENUMDOC
+ Long displacement extension.
ENUM
BFD_RELOC_IP2K_FR9
ENUM
BFD_RELOC_XSTORMY16_REL_12
+ENUMX
+ BFD_RELOC_XSTORMY16_12
ENUMX
BFD_RELOC_XSTORMY16_24
ENUMX
BFD_RELOC_VAX_RELATIVE
ENUMDOC
Relocations used by VAX ELF.
+
+ENUM
+ BFD_RELOC_MSP430_10_PCREL
+ENUMX
+ BFD_RELOC_MSP430_16_PCREL
+ENUMX
+ BFD_RELOC_MSP430_16
+ENUMX
+ BFD_RELOC_MSP430_16_PCREL_BYTE
+ENUMX
+ BFD_RELOC_MSP430_16_BYTE
+ENUMDOC
+ msp430 specific relocation codes
+
+ENUM
+ BFD_RELOC_IQ2000_OFFSET_16
+ENUMX
+ BFD_RELOC_IQ2000_OFFSET_21
+ENUMX
+ BFD_RELOC_IQ2000_UHI16
+ENUMDOC
+ IQ2000 Relocations.
+
+ENUM
+ BFD_RELOC_XTENSA_RTLD
+ENUMDOC
+ Special Xtensa relocation used only by PLT entries in ELF shared
+ objects to indicate that the runtime linker should set the value
+ to one of its own internal functions or data structures.
+ENUM
+ BFD_RELOC_XTENSA_GLOB_DAT
+ENUMX
+ BFD_RELOC_XTENSA_JMP_SLOT
+ENUMX
+ BFD_RELOC_XTENSA_RELATIVE
+ENUMDOC
+ Xtensa relocations for ELF shared objects.
+ENUM
+ BFD_RELOC_XTENSA_PLT
+ENUMDOC
+ Xtensa relocation used in ELF object files for symbols that may require
+ PLT entries. Otherwise, this is just a generic 32-bit relocation.
+ENUM
+ BFD_RELOC_XTENSA_OP0
+ENUMX
+ BFD_RELOC_XTENSA_OP1
+ENUMX
+ BFD_RELOC_XTENSA_OP2
+ENUMDOC
+ Generic Xtensa relocations. Only the operand number is encoded
+ in the relocation. The details are determined by extracting the
+ instruction opcode.
+ENUM
+ BFD_RELOC_XTENSA_ASM_EXPAND
+ENUMDOC
+ Xtensa relocation to mark that the assembler expanded the
+ instructions from an original target. The expansion size is
+ encoded in the reloc size.
+ENUM
+ BFD_RELOC_XTENSA_ASM_SIMPLIFY
+ENUMDOC
+ Xtensa relocation to mark that the linker should simplify
+ assembler-expanded instructions. This is commonly used
+ internally by the linker after analysis of a
+ BFD_RELOC_XTENSA_ASM_EXPAND.
ENDSENUM
BFD_RELOC_UNUSED
bfd_reloc_type_lookup
SYNOPSIS
- reloc_howto_type *
- bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code);
+ reloc_howto_type *bfd_reloc_type_lookup
+ (bfd *abfd, bfd_reloc_code_real_type code);
DESCRIPTION
Return a pointer to a howto structure which, when
*/
reloc_howto_type *
-bfd_reloc_type_lookup (abfd, code)
- bfd *abfd;
- bfd_reloc_code_real_type code;
+bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
{
return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
}
SYNOPSIS
reloc_howto_type *bfd_default_reloc_type_lookup
- (bfd *abfd, bfd_reloc_code_real_type code);
+ (bfd *abfd, bfd_reloc_code_real_type code);
DESCRIPTION
Provides a default relocation lookup routine for any architecture.
*/
reloc_howto_type *
-bfd_default_reloc_type_lookup (abfd, code)
- bfd *abfd;
- bfd_reloc_code_real_type code;
+bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
{
switch (code)
{
default:
BFD_FAIL ();
}
- return (reloc_howto_type *) NULL;
+ return NULL;
}
/*
*/
const char *
-bfd_get_reloc_code_name (code)
- bfd_reloc_code_real_type code;
+bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
{
- if ((int) code > (int) BFD_RELOC_UNUSED)
+ if (code > BFD_RELOC_UNUSED)
return 0;
- return bfd_reloc_code_real_names[(int)code];
+ return bfd_reloc_code_real_names[code];
}
/*
SYNOPSIS
bfd_boolean bfd_generic_relax_section
- (bfd *abfd,
- asection *section,
- struct bfd_link_info *,
- bfd_boolean *);
+ (bfd *abfd,
+ asection *section,
+ struct bfd_link_info *,
+ bfd_boolean *);
DESCRIPTION
Provides default handling for relaxing for back ends which
*/
bfd_boolean
-bfd_generic_relax_section (abfd, section, link_info, again)
- bfd *abfd ATTRIBUTE_UNUSED;
- asection *section ATTRIBUTE_UNUSED;
- struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
- bfd_boolean *again;
+bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
+ asection *section ATTRIBUTE_UNUSED,
+ struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
+ bfd_boolean *again)
{
*again = FALSE;
return TRUE;
SYNOPSIS
bfd_boolean bfd_generic_gc_sections
- (bfd *, struct bfd_link_info *);
+ (bfd *, struct bfd_link_info *);
DESCRIPTION
Provides default handling for relaxing for back ends which
*/
bfd_boolean
-bfd_generic_gc_sections (abfd, link_info)
- bfd *abfd ATTRIBUTE_UNUSED;
- struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
+bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
+ struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
{
return TRUE;
}
SYNOPSIS
bfd_boolean bfd_generic_merge_sections
- (bfd *, struct bfd_link_info *);
+ (bfd *, struct bfd_link_info *);
DESCRIPTION
Provides default handling for SEC_MERGE section merging for back ends
*/
bfd_boolean
-bfd_generic_merge_sections (abfd, link_info)
- bfd *abfd ATTRIBUTE_UNUSED;
- struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
+bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
+ struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
{
return TRUE;
}
bfd_generic_get_relocated_section_contents
SYNOPSIS
- bfd_byte *
- bfd_generic_get_relocated_section_contents (bfd *abfd,
- struct bfd_link_info *link_info,
- struct bfd_link_order *link_order,
- bfd_byte *data,
- bfd_boolean relocateable,
- asymbol **symbols);
+ bfd_byte *bfd_generic_get_relocated_section_contents
+ (bfd *abfd,
+ struct bfd_link_info *link_info,
+ struct bfd_link_order *link_order,
+ bfd_byte *data,
+ bfd_boolean relocatable,
+ asymbol **symbols);
DESCRIPTION
Provides default handling of relocation effort for back ends
*/
bfd_byte *
-bfd_generic_get_relocated_section_contents (abfd, link_info, link_order, data,
- relocateable, symbols)
- bfd *abfd;
- struct bfd_link_info *link_info;
- struct bfd_link_order *link_order;
- bfd_byte *data;
- bfd_boolean relocateable;
- asymbol **symbols;
+bfd_generic_get_relocated_section_contents (bfd *abfd,
+ struct bfd_link_info *link_info,
+ struct bfd_link_order *link_order,
+ bfd_byte *data,
+ bfd_boolean relocatable,
+ asymbol **symbols)
{
/* Get enough memory to hold the stuff. */
bfd *input_bfd = link_order->u.indirect.section->owner;
if (reloc_size < 0)
goto error_return;
- reloc_vector = (arelent **) bfd_malloc ((bfd_size_type) reloc_size);
+ reloc_vector = bfd_malloc (reloc_size);
if (reloc_vector == NULL && reloc_size != 0)
goto error_return;
/* Read in the section. */
if (!bfd_get_section_contents (input_bfd,
input_section,
- (PTR) data,
- (bfd_vma) 0,
+ data,
+ 0,
input_section->_raw_size))
goto error_return;
if (reloc_count > 0)
{
arelent **parent;
- for (parent = reloc_vector; *parent != (arelent *) NULL;
- parent++)
+ for (parent = reloc_vector; *parent != NULL; parent++)
{
- char *error_message = (char *) NULL;
+ char *error_message = NULL;
bfd_reloc_status_type r =
bfd_perform_relocation (input_bfd,
*parent,
- (PTR) data,
+ data,
input_section,
- relocateable ? abfd : (bfd *) NULL,
+ relocatable ? abfd : NULL,
&error_message);
- if (relocateable)
+ if (relocatable)
{
asection *os = input_section->output_section;
goto error_return;
break;
case bfd_reloc_dangerous:
- BFD_ASSERT (error_message != (char *) NULL);
+ BFD_ASSERT (error_message != NULL);
if (!((*link_info->callbacks->reloc_dangerous)
(link_info, error_message, input_bfd, input_section,
(*parent)->address)))