/* Object file "section" support for the BFD library.
- Copyright (C) 1990-1991 Free Software Foundation, Inc.
+ Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+ Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-/*doc*
-@section Sections
-Sections are supported in BFD in @code{section.c}.
+/*
+SECTION
+ Sections
-The raw data contained within a BFD is maintained through the section
-abstraction. A single BFD may have any number of sections, and keeps
-hold of them by pointing to the first, each one points to the next in
-the list.
+ The raw data contained within a BFD is maintained through the
+ section abstraction. A single BFD may have any number of
+ sections. It keeps hold of them by pointing to the first;
+ each one points to the next in the list.
+
+ Sections are supported in BFD in <<section.c>>.
@menu
-* Section Input::
-* Section Output::
-* typedef asection::
-* section prototypes::
+@* Section Input::
+@* Section Output::
+@* typedef asection::
+@* section prototypes::
@end menu
-@node Section Input, Section Output,,Sections
-@comment node-name, next, previous, up
-@subsection Section Input
-When a BFD is opened for reading, the section structures are created
-and attatched to the BFD.
-
-Each section has a name which describes the section in the outside
-world - for example, @code{a.out} would contain at least three
-sections, called @code{.text}, @code{.data} and @code{.bss}.
-
-Sometimes a BFD will contain more than the 'natural' number of
-sections. A back end may attatch other sections containing constructor
-data, or an application may add a section (using bfd_make_section) to
-the sections attatched to an already open BFD. For example, the linker
-creates a supernumary section @code{COMMON} for each input file's BFD
-to hold information about common storage.
-
-The raw data is not necessarily read in at the same time as the
-section descriptor is created. Some targets may leave the data in
-place until a @code{bfd_get_section_contents} call is made. Other back
-ends may read in all the data at once - For example; an S-record file
-has to be read once to determine the size of the data. An IEEE-695
-file doesn't contain raw data in sections, but data and relocation
-expressions intermixed, so the data area has to be parsed to get out
-the data and relocations.
-
-@node Section Output,typedef asection,Section Input,Sections
-@subsection Section Output
-To write a new object style BFD, the various sections to be written
-have to be created. They are attatched to the BFD in the same way as
-input sections, data is written to the sections using
-@code{bfd_set_section_contents}.
-
-The linker uses the fields @code{output_section} and
-@code{output_offset} to create an output file.
-
-The data to be written comes from input sections attatched to the
-output sections. The output section structure can be considered a
-filter for the input section, the output section determines the vma of
-the output data and the name, but the input section determines the
-offset into the output section of the data to be written.
-
-Eg to create a section "O", starting at 0x100, 0x123 long, containing two
-subsections, "A" at offset 0x0 (ie at vma 0x100) and "B" at offset
-0x20 (ie at vma 0x120) the structures would look like:
-
-*+
-
- section name "A"
- output_offset 0x00
- size 0x20
- output_section -----------> section name "O"
- | vma 0x100
- section name "B" | size 0x123
- output_offset 0x20 |
- size 0x103 |
- output_section --------|
-
-*-
+INODE
+Section Input, Section Output, Sections, Sections
+SUBSECTION
+ Section input
+
+ When a BFD is opened for reading, the section structures are
+ created and attached to the BFD.
+
+ Each section has a name which describes the section in the
+ outside world---for example, <<a.out>> would contain at least
+ three sections, called <<.text>>, <<.data>> and <<.bss>>.
+
+ Names need not be unique; for example a COFF file may have several
+ sections named <<.data>>.
+
+ Sometimes a BFD will contain more than the ``natural'' number of
+ sections. A back end may attach other sections containing
+ constructor data, or an application may add a section (using
+ <<bfd_make_section>>) to the sections attached to an already open
+ BFD. For example, the linker creates an extra section
+ <<COMMON>> for each input file's BFD to hold information about
+ common storage.
+
+ The raw data is not necessarily read in when
+ the section descriptor is created. Some targets may leave the
+ data in place until a <<bfd_get_section_contents>> call is
+ made. Other back ends may read in all the data at once. For
+ example, an S-record file has to be read once to determine the
+ size of the data. An IEEE-695 file doesn't contain raw data in
+ sections, but data and relocation expressions intermixed, so
+ the data area has to be parsed to get out the data and
+ relocations.
+
+INODE
+Section Output, typedef asection, Section Input, Sections
+
+SUBSECTION
+ Section output
+
+ To write a new object style BFD, the various sections to be
+ written have to be created. They are attached to the BFD in
+ the same way as input sections; data is written to the
+ sections using <<bfd_set_section_contents>>.
+
+ Any program that creates or combines sections (e.g., the assembler
+ and linker) must use the <<asection>> fields <<output_section>> and
+ <<output_offset>> to indicate the file sections to which each
+ section must be written. (If the section is being created from
+ scratch, <<output_section>> should probably point to the section
+ itself and <<output_offset>> should probably be zero.)
+
+ The data to be written comes from input sections attached
+ (via <<output_section>> pointers) to
+ the output sections. The output section structure can be
+ considered a filter for the input section: the output section
+ determines the vma of the output data and the name, but the
+ input section determines the offset into the output section of
+ the data to be written.
+
+ E.g., to create a section "O", starting at 0x100, 0x123 long,
+ containing two subsections, "A" at offset 0x0 (i.e., at vma
+ 0x100) and "B" at offset 0x20 (i.e., at vma 0x120) the <<asection>>
+ structures would look like:
+
+| section name "A"
+| output_offset 0x00
+| size 0x20
+| output_section -----------> section name "O"
+| | vma 0x100
+| section name "B" | size 0x123
+| output_offset 0x20 |
+| size 0x103 |
+| output_section --------|
+
+
+SUBSECTION
+ Link orders
+
+ The data within a section is stored in a @dfn{link_order}.
+ These are much like the fixups in <<gas>>. The link_order
+ abstraction allows a section to grow and shrink within itself.
+
+ A link_order knows how big it is, and which is the next
+ link_order and where the raw data for it is; it also points to
+ a list of relocations which apply to it.
+
+ The link_order is used by the linker to perform relaxing on
+ final code. The compiler creates code which is as big as
+ necessary to make it work without relaxing, and the user can
+ select whether to relax. Sometimes relaxing takes a lot of
+ time. The linker runs around the relocations to see if any
+ are attached to data which can be shrunk, if so it does it on
+ a link_order by link_order basis.
*/
-#include "sysdep.h"
#include "bfd.h"
+#include "sysdep.h"
#include "libbfd.h"
-
-
-/*doc*
-@node typedef asection,section prototypes,Section Output,Sections
-@subsection typedef asection
+#include "bfdlink.h"
+
+/*
+DOCDD
+INODE
+typedef asection, section prototypes, Section Output, Sections
+SUBSECTION
+ typedef asection
+
+ Here is the section structure:
+
+CODE_FRAGMENT
+.
+. {* This structure is used for a comdat section, as in PE. A comdat
+. section is associated with a particular symbol. When the linker
+. sees a comdat section, it keeps only one of the sections with a
+. given name and associated with a given symbol. *}
+.
+.struct bfd_comdat_info
+.{
+. {* The name of the symbol associated with a comdat section. *}
+. const char *name;
+.
+. {* The local symbol table index of the symbol associated with a
+. comdat section. This is only meaningful to the object file format
+. specific code; it is not an index into the list returned by
+. bfd_canonicalize_symtab. *}
+. long symbol;
+.
+. {* If this section is being discarded, the linker uses this field
+. to point to the input section which is being kept. *}
+. struct sec *sec;
+.};
+.
+.typedef struct sec
+.{
+. {* The name of the section; the name isn't a copy, the pointer is
+. the same as that passed to bfd_make_section. *}
+.
+. CONST char *name;
+.
+. {* Which section is it; 0..nth. *}
+.
+. int index;
+.
+. {* The next section in the list belonging to the BFD, or NULL. *}
+.
+. struct sec *next;
+.
+. {* The field flags contains attributes of the section. Some
+. flags are read in from the object file, and some are
+. synthesized from other information. *}
+.
+. flagword flags;
+.
+.#define SEC_NO_FLAGS 0x000
+.
+. {* Tells the OS to allocate space for this section when loading.
+. This is clear for a section containing debug information
+. only. *}
+.#define SEC_ALLOC 0x001
+.
+. {* Tells the OS to load the section from the file when loading.
+. This is clear for a .bss section. *}
+.#define SEC_LOAD 0x002
+.
+. {* The section contains data still to be relocated, so there is
+. some relocation information too. *}
+.#define SEC_RELOC 0x004
+.
+.#if 0 {* Obsolete ? *}
+.#define SEC_BALIGN 0x008
+.#endif
+.
+. {* A signal to the OS that the section contains read only
+. data. *}
+.#define SEC_READONLY 0x010
+.
+. {* The section contains code only. *}
+.#define SEC_CODE 0x020
+.
+. {* The section contains data only. *}
+.#define SEC_DATA 0x040
+.
+. {* The section will reside in ROM. *}
+.#define SEC_ROM 0x080
+.
+. {* The section contains constructor information. This section
+. type is used by the linker to create lists of constructors and
+. destructors used by <<g++>>. When a back end sees a symbol
+. which should be used in a constructor list, it creates a new
+. section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
+. the symbol to it, and builds a relocation. To build the lists
+. of constructors, all the linker has to do is catenate all the
+. sections called <<__CTOR_LIST__>> and relocate the data
+. contained within - exactly the operations it would peform on
+. standard data. *}
+.#define SEC_CONSTRUCTOR 0x100
+.
+. {* The section is a constructor, and should be placed at the
+. end of the text, data, or bss section(?). *}
+.#define SEC_CONSTRUCTOR_TEXT 0x1100
+.#define SEC_CONSTRUCTOR_DATA 0x2100
+.#define SEC_CONSTRUCTOR_BSS 0x3100
+.
+. {* The section has contents - a data section could be
+. <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
+. <<SEC_HAS_CONTENTS>> *}
+.#define SEC_HAS_CONTENTS 0x200
+.
+. {* An instruction to the linker to not output the section
+. even if it has information which would normally be written. *}
+.#define SEC_NEVER_LOAD 0x400
+.
+. {* The section is a COFF shared library section. This flag is
+. only for the linker. If this type of section appears in
+. the input file, the linker must copy it to the output file
+. without changing the vma or size. FIXME: Although this
+. was originally intended to be general, it really is COFF
+. specific (and the flag was renamed to indicate this). It
+. might be cleaner to have some more general mechanism to
+. allow the back end to control what the linker does with
+. sections. *}
+.#define SEC_COFF_SHARED_LIBRARY 0x800
+.
+. {* The section contains common symbols (symbols may be defined
+. multiple times, the value of a symbol is the amount of
+. space it requires, and the largest symbol value is the one
+. used). Most targets have exactly one of these (which we
+. translate to bfd_com_section_ptr), but ECOFF has two. *}
+.#define SEC_IS_COMMON 0x8000
+.
+. {* The section contains only debugging information. For
+. example, this is set for ELF .debug and .stab sections.
+. strip tests this flag to see if a section can be
+. discarded. *}
+.#define SEC_DEBUGGING 0x10000
+.
+. {* The contents of this section are held in memory pointed to
+. by the contents field. This is checked by
+. bfd_get_section_contents, and the data is retrieved from
+. memory if appropriate. *}
+.#define SEC_IN_MEMORY 0x20000
+.
+. {* The contents of this section are to be excluded by the
+. linker for executable and shared objects unless those
+. objects are to be further relocated. *}
+.#define SEC_EXCLUDE 0x40000
+.
+. {* The contents of this section are to be sorted by the
+. based on the address specified in the associated symbol
+. table. *}
+.#define SEC_SORT_ENTRIES 0x80000
+.
+. {* When linking, duplicate sections of the same name should be
+. discarded, rather than being combined into a single section as
+. is usually done. This is similar to how common symbols are
+. handled. See SEC_LINK_DUPLICATES below. *}
+.#define SEC_LINK_ONCE 0x100000
+.
+. {* If SEC_LINK_ONCE is set, this bitfield describes how the linker
+. should handle duplicate sections. *}
+.#define SEC_LINK_DUPLICATES 0x600000
+.
+. {* This value for SEC_LINK_DUPLICATES means that duplicate
+. sections with the same name should simply be discarded. *}
+.#define SEC_LINK_DUPLICATES_DISCARD 0x0
+.
+. {* This value for SEC_LINK_DUPLICATES means that the linker
+. should warn if there are any duplicate sections, although
+. it should still only link one copy. *}
+.#define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
+.
+. {* This value for SEC_LINK_DUPLICATES means that the linker
+. should warn if any duplicate sections are a different size. *}
+.#define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
+.
+. {* This value for SEC_LINK_DUPLICATES means that the linker
+. should warn if any duplicate sections contain different
+. contents. *}
+.#define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
+.
+. {* This section was created by the linker as part of dynamic
+. relocation or other arcane processing. It is skipped when
+. going through the first-pass output, trusting that someone
+. else up the line will take care of it later. *}
+.#define SEC_LINKER_CREATED 0x800000
+.
+. {* This section should not be subject to garbage collection. *}
+.#define SEC_KEEP 0x1000000
+.
+. {* This section contains "short" data, and should be placed
+. "near" the GP. *}
+.#define SEC_SMALL_DATA 0x2000000
+.
+. {* This section contains data which may be shared with other
+. executables or shared objects. *}
+.#define SEC_SHARED 0x4000000
+.
+. {* End of section flags. *}
+.
+. {* Some internal packed boolean fields. *}
+.
+. {* See the vma field. *}
+. unsigned int user_set_vma : 1;
+.
+. {* Whether relocations have been processed. *}
+. unsigned int reloc_done : 1;
+.
+. {* A mark flag used by some of the linker backends. *}
+. unsigned int linker_mark : 1;
+.
+. {* A mark flag used by some linker backends for garbage collection. *}
+. unsigned int gc_mark : 1;
+.
+. {* End of internal packed boolean fields. *}
+.
+. {* The virtual memory address of the section - where it will be
+. at run time. The symbols are relocated against this. The
+. user_set_vma flag is maintained by bfd; if it's not set, the
+. backend can assign addresses (for example, in <<a.out>>, where
+. the default address for <<.data>> is dependent on the specific
+. target and various flags). *}
+.
+. bfd_vma vma;
+.
+. {* The load address of the section - where it would be in a
+. rom image; really only used for writing section header
+. information. *}
+.
+. bfd_vma lma;
+.
+. {* The size of the section in octets, as it will be output.
+. Contains a value even if the section has no contents (e.g., the
+. size of <<.bss>>). This will be filled in after relocation. *}
+.
+. bfd_size_type _cooked_size;
+.
+. {* The original size on disk of the section, in octets. Normally this
+. value is the same as the size, but if some relaxing has
+. been done, then this value will be bigger. *}
+.
+. bfd_size_type _raw_size;
+.
+. {* If this section is going to be output, then this value is the
+. offset in *bytes* into the output section of the first byte in the
+. input section (byte ==> smallest addressable unit on the
+. target). In most cases, if this was going to start at the
+. 100th octet (8-bit quantity) in the output section, this value
+. would be 100. However, if the target byte size is 16 bits
+. (bfd_octets_per_byte is "2"), this value would be 50. *}
+.
+. bfd_vma output_offset;
+.
+. {* The output section through which to map on output. *}
+.
+. struct sec *output_section;
+.
+. {* The alignment requirement of the section, as an exponent of 2 -
+. e.g., 3 aligns to 2^3 (or 8). *}
+.
+. unsigned int alignment_power;
+.
+. {* If an input section, a pointer to a vector of relocation
+. records for the data in this section. *}
+.
+. struct reloc_cache_entry *relocation;
+.
+. {* If an output section, a pointer to a vector of pointers to
+. relocation records for the data in this section. *}
+.
+. struct reloc_cache_entry **orelocation;
+.
+. {* The number of relocation records in one of the above *}
+.
+. unsigned reloc_count;
+.
+. {* Information below is back end specific - and not always used
+. or updated. *}
+.
+. {* File position of section data *}
+.
+. file_ptr filepos;
+.
+. {* File position of relocation info *}
+.
+. file_ptr rel_filepos;
+.
+. {* File position of line data *}
+.
+. file_ptr line_filepos;
+.
+. {* Pointer to data for applications *}
+.
+. PTR userdata;
+.
+. {* If the SEC_IN_MEMORY flag is set, this points to the actual
+. contents. *}
+. unsigned char *contents;
+.
+. {* Attached line number information *}
+.
+. alent *lineno;
+.
+. {* Number of line number records *}
+.
+. unsigned int lineno_count;
+.
+. {* Optional information about a COMDAT entry; NULL if not COMDAT *}
+.
+. struct bfd_comdat_info *comdat;
+.
+. {* When a section is being output, this value changes as more
+. linenumbers are written out *}
+.
+. file_ptr moving_line_filepos;
+.
+. {* What the section number is in the target world *}
+.
+. int target_index;
+.
+. PTR used_by_bfd;
+.
+. {* If this is a constructor section then here is a list of the
+. relocations created to relocate items within it. *}
+.
+. struct relent_chain *constructor_chain;
+.
+. {* The BFD which owns the section. *}
+.
+. bfd *owner;
+.
+. {* A symbol which points at this section only *}
+. struct symbol_cache_entry *symbol;
+. struct symbol_cache_entry **symbol_ptr_ptr;
+.
+. struct bfd_link_order *link_order_head;
+. struct bfd_link_order *link_order_tail;
+.} asection ;
+.
+. {* These sections are global, and are managed by BFD. The application
+. and target back end are not permitted to change the values in
+. these sections. New code should use the section_ptr macros rather
+. than referring directly to the const sections. The const sections
+. may eventually vanish. *}
+.#define BFD_ABS_SECTION_NAME "*ABS*"
+.#define BFD_UND_SECTION_NAME "*UND*"
+.#define BFD_COM_SECTION_NAME "*COM*"
+.#define BFD_IND_SECTION_NAME "*IND*"
+.
+. {* the absolute section *}
+.extern const asection bfd_abs_section;
+.#define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
+.#define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
+. {* Pointer to the undefined section *}
+.extern const asection bfd_und_section;
+.#define bfd_und_section_ptr ((asection *) &bfd_und_section)
+.#define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
+. {* Pointer to the common section *}
+.extern const asection bfd_com_section;
+.#define bfd_com_section_ptr ((asection *) &bfd_com_section)
+. {* Pointer to the indirect section *}
+.extern const asection bfd_ind_section;
+.#define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
+.#define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
+.
+.extern const struct symbol_cache_entry * const bfd_abs_symbol;
+.extern const struct symbol_cache_entry * const bfd_com_symbol;
+.extern const struct symbol_cache_entry * const bfd_und_symbol;
+.extern const struct symbol_cache_entry * const bfd_ind_symbol;
+.#define bfd_get_section_size_before_reloc(section) \
+. ((section)->reloc_done ? (abort (), (bfd_size_type) 1) \
+. : (section)->_raw_size)
+.#define bfd_get_section_size_after_reloc(section) \
+. ((section)->reloc_done ? (section)->_cooked_size \
+. : (abort (), (bfd_size_type) 1))
*/
-/*proto*
-The shape of a section struct:
-
-*+++
-
-$typedef struct sec {
-
-The name of the section, the name isn't a copy, the pointer is
-the same as that passed to bfd_make_section.
-
-$ CONST char *name;
-
-The next section in the list belonging to the BFD, or NULL.
-
-$ struct sec *next;
-
-The field flags contains attributes of the section. Some of these
-flags are read in from the object file, and some are synthesized from
-other information.
-
-$flagword flags;
-
-
-$#define SEC_NO_FLAGS 0x000
-
-Tells the OS to allocate space for this section when loaded.
-This would clear for a section containing debug information only.
-
-$#define SEC_ALLOC 0x001
-
-Tells the OS to load the section from the file when loading.
-This would be clear for a .bss section
-
-$#define SEC_LOAD 0x002
-
-The section contains data still to be relocated, so there will be some
-relocation information too.
-
-$#define SEC_RELOC 0x004
-
-Obsolete ?
-
-$#define SEC_BALIGN 0x008
-
-A signal to the OS that the section contains read only data.
-
-$#define SEC_READONLY 0x010
-
-The section contains code only.
-
-$#define SEC_CODE 0x020
-
-The section contains data only.
-
-$#define SEC_DATA 0x040
-
-The section will reside in ROM.
-
-$#define SEC_ROM 0x080
-
-The section contains constructor information. This section type is
-used by the linker to create lists of constructors and destructors
-used by @code{g++}. When a back end sees a symbol which should be used
-in a constructor list, it creates a new section for the type of name
-(eg @code{__CTOR_LIST__}), attatches the symbol to it and builds a
-relocation. To build the lists of constructors, all the linker has to
-to is catenate all the sections called @code{__CTOR_LIST__} and
-relocte the data contained within - exactly the operations it would
-peform on standard data.
-
-$#define SEC_CONSTRUCTOR 0x100
-
-The section is a constuctor, and should be placed at the end of the ..
-
-$#define SEC_CONSTRUCTOR_TEXT 0x1100
-
-$#define SEC_CONSTRUCTOR_DATA 0x2100
-
-$#define SEC_CONSTRUCTOR_BSS 0x3100
-
-
-The section has contents - a bss section could be
-@code{SEC_ALLOC} | @code{SEC_HAS_CONTENTS}, a debug section could be
-@code{SEC_HAS_CONTENTS}
-
-$#define SEC_HAS_CONTENTS 0x200
-
-An instruction to the linker not to output sections containing
-this flag even if they have information which would normally be written.
-
-$#define SEC_NEVER_LOAD 0x400
-
-
-The base address of the section in the address space of the target.
-
-$ bfd_vma vma;
-
-The size of the section in bytes of the loaded section. This contains
-a value even if the section has no contents (eg, the size of @code{.bss}).
-
-$ bfd_size_type size;
-
-If this section is going to be output, then this value is the
-offset into the output section of the first byte in the input
-section. Eg, if this was going to start at the 100th byte in the
-output section, this value would be 100.
-
-$ bfd_vma output_offset;
-
-The output section through which to map on output.
-
-$ struct sec *output_section;
-
-The alignment requirement of the section, as an exponent - eg 3
-aligns to 2^3 (or 8)
-
-$ unsigned int alignment_power;
-
-If an input section, a pointer to a vector of relocation records for
-the data in this section.
-
-$ struct reloc_cache_entry *relocation;
-
-If an output section, a pointer to a vector of pointers to
-relocation records for the data in this section.
-
-$ struct reloc_cache_entry **orelocation;
-
-The number of relocation records in one of the above
-
-$ unsigned reloc_count;
-
-Which section is it 0..nth
-
-$ int index;
-
-Information below is back end specific - and not always used or
-updated
-
-File position of section data
-
-$ file_ptr filepos;
-File position of relocation info
-
-$ file_ptr rel_filepos;
-
-File position of line data
-
-$ file_ptr line_filepos;
-
-Pointer to data for applications
-
-$ PTR userdata;
-
-$ struct lang_output_section *otheruserdata;
-
-Attached line number information
-
-$ alent *lineno;
-Number of line number records
+/* We use a macro to initialize the static asymbol structures because
+ traditional C does not permit us to initialize a union member while
+ gcc warns if we don't initialize it. */
+ /* the_bfd, name, value, attr, section [, udata] */
+#ifdef __STDC__
+#define GLOBAL_SYM_INIT(NAME, SECTION) \
+ { 0, NAME, 0, BSF_SECTION_SYM, (asection *) SECTION, { 0 }}
+#else
+#define GLOBAL_SYM_INIT(NAME, SECTION) \
+ { 0, NAME, 0, BSF_SECTION_SYM, (asection *) SECTION }
+#endif
+
+/* These symbols are global, not specific to any BFD. Therefore, anything
+ that tries to change them is broken, and should be repaired. */
+
+static const asymbol global_syms[] =
+{
+ GLOBAL_SYM_INIT (BFD_COM_SECTION_NAME, &bfd_com_section),
+ GLOBAL_SYM_INIT (BFD_UND_SECTION_NAME, &bfd_und_section),
+ GLOBAL_SYM_INIT (BFD_ABS_SECTION_NAME, &bfd_abs_section),
+ GLOBAL_SYM_INIT (BFD_IND_SECTION_NAME, &bfd_ind_section)
+};
+
+#define STD_SECTION(SEC, FLAGS, SYM, NAME, IDX) \
+ const asymbol * const SYM = (asymbol *) &global_syms[IDX]; \
+ const asection SEC = \
+ /* name, index, next, flags, set_vma, reloc_done, linker_mark, gc_mark */ \
+ { NAME, 0, 0, FLAGS, 0, 0, 0, 0, \
+ \
+ /* vma, lma, _cooked_size, _raw_size, output_offset, output_section, */ \
+ 0, 0, 0, 0, 0, (struct sec *) &SEC, \
+ \
+ /* alig..., reloc..., orel..., reloc_count, filepos, rel_..., line_... */ \
+ 0, 0, 0, 0, 0, 0, 0, \
+ \
+ /* userdata, contents, lineno, lineno_count */ \
+ 0, 0, 0, 0, \
+ \
+ /* comdat_info, moving_line_filepos, target_index, used_by_bfd, */ \
+ NULL, 0, 0, 0, \
+ \
+ /* cons..., owner, symbol */ \
+ 0, 0, (struct symbol_cache_entry *) &global_syms[IDX], \
+ \
+ /* symbol_ptr_ptr, link_order_head, ..._tail */ \
+ (struct symbol_cache_entry **) &SYM, 0, 0 \
+ }
+
+STD_SECTION (bfd_com_section, SEC_IS_COMMON, bfd_com_symbol,
+ BFD_COM_SECTION_NAME, 0);
+STD_SECTION (bfd_und_section, 0, bfd_und_symbol, BFD_UND_SECTION_NAME, 1);
+STD_SECTION (bfd_abs_section, 0, bfd_abs_symbol, BFD_ABS_SECTION_NAME, 2);
+STD_SECTION (bfd_ind_section, 0, bfd_ind_symbol, BFD_IND_SECTION_NAME, 3);
+#undef STD_SECTION
+
+/*
+DOCDD
+INODE
+section prototypes, , typedef asection, Sections
+SUBSECTION
+ Section prototypes
+
+These are the functions exported by the section handling part of BFD.
+*/
-$ unsigned int lineno_count;
+/*
+FUNCTION
+ bfd_get_section_by_name
-When a section is being output, this value changes as more
-linenumbers are written out
+SYNOPSIS
+ asection *bfd_get_section_by_name(bfd *abfd, CONST char *name);
-$ file_ptr moving_line_filepos;
+DESCRIPTION
+ Run through @var{abfd} and return the one of the
+ <<asection>>s whose name matches @var{name}, otherwise <<NULL>>.
+ @xref{Sections}, for more information.
-what the section number is in the target world
+ This should only be used in special cases; the normal way to process
+ all sections of a given name is to use <<bfd_map_over_sections>> and
+ <<strcmp>> on the name (or better yet, base it on the section flags
+ or something else) for each section.
+*/
-$ unsigned int target_index;
+asection *
+bfd_get_section_by_name (abfd, name)
+ bfd *abfd;
+ CONST char *name;
+{
+ asection *sect;
-$ PTR used_by_bfd;
+ for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ if (!strcmp (sect->name, name))
+ return sect;
+ return NULL;
+}
-If this is a constructor section then here is a list of the
-relocations created to relocate items within it.
-$ struct relent_chain *constructor_chain;
+/*
+FUNCTION
+ bfd_make_section_old_way
-The BFD which owns the section.
+SYNOPSIS
+ asection *bfd_make_section_old_way(bfd *abfd, CONST char *name);
-$ bfd *owner;
+DESCRIPTION
+ Create a new empty section called @var{name}
+ and attach it to the end of the chain of sections for the
+ BFD @var{abfd}. An attempt to create a section with a name which
+ is already in use returns its pointer without changing the
+ section chain.
-$} asection ;
+ It has the funny name since this is the way it used to be
+ before it was rewritten....
-*---
+ Possible errors are:
+ o <<bfd_error_invalid_operation>> -
+ If output has already started for this BFD.
+ o <<bfd_error_no_memory>> -
+ If memory allocation fails.
*/
-/*doc*
-@node section prototypes,Section,typedef section,Sections
-@subsection section prototypes
-*/
-/*proto* bfd_get_section_by_name
-Runs through the provided @var{abfd} and returns the @code{asection}
-who's name matches that provided, otherwise NULL. @xref{Sections}, for more information.
-
-*; PROTO(asection *, bfd_get_section_by_name,
- (bfd *abfd, CONST char *name));
-*/
asection *
-DEFUN(bfd_get_section_by_name,(abfd, name),
- bfd *abfd AND
- CONST char *name)
+bfd_make_section_old_way (abfd, name)
+ bfd *abfd;
+ CONST char *name;
{
- asection *sect;
-
- for (sect = abfd->sections; sect != NULL; sect = sect->next)
- if (!strcmp (sect->name, name)) return sect;
- return NULL;
+ asection *sec = bfd_get_section_by_name (abfd, name);
+ if (sec == (asection *) NULL)
+ {
+ sec = bfd_make_section (abfd, name);
+ }
+ return sec;
}
+/*
+FUNCTION
+ bfd_make_section_anyway
-/*proto* bfd_make_section
-This function creates a new empty section called @var{name} and attatches it
-to the end of the chain of sections for the BFD supplied. An attempt to
-create a section with a name which is already in use, returns the old
-section by that name instead.
+SYNOPSIS
+ asection *bfd_make_section_anyway(bfd *abfd, CONST char *name);
-Possible errors are:
-@table @code
-@item invalid_operation
-If output has already started for this BFD.
-@item no_memory
-If obstack alloc fails.
-@end table
+DESCRIPTION
+ Create a new empty section called @var{name} and attach it to the end of
+ the chain of sections for @var{abfd}. Create a new section even if there
+ is already a section with that name.
-*; PROTO(asection *, bfd_make_section, (bfd *, CONST char *name));
+ Return <<NULL>> and set <<bfd_error>> on error; possible errors are:
+ o <<bfd_error_invalid_operation>> - If output has already started for @var{abfd}.
+ o <<bfd_error_no_memory>> - If memory allocation fails.
*/
-
-
sec_ptr
-DEFUN(bfd_make_section,(abfd, name),
- bfd *abfd AND
- CONST char * name)
+bfd_make_section_anyway (abfd, name)
+ bfd *abfd;
+ CONST char *name;
{
- asection *newsect;
- asection ** prev = &abfd->sections;
- asection * sect = abfd->sections;
-
- if (abfd->output_has_begun) {
- bfd_error = invalid_operation;
+ asection *newsect;
+ asection **prev = &abfd->sections;
+ asection *sect = abfd->sections;
+
+ if (abfd->output_has_begun)
+ {
+ bfd_set_error (bfd_error_invalid_operation);
+ return NULL;
+ }
+
+ while (sect)
+ {
+ prev = §->next;
+ sect = sect->next;
+ }
+
+ newsect = (asection *) bfd_zalloc (abfd, sizeof (asection));
+ if (newsect == NULL)
return NULL;
- }
-
- while (sect) {
- if (!strcmp(sect->name, name)) return sect;
- prev = §->next;
- sect = sect->next;
- }
-
- newsect = (asection *) bfd_zalloc(abfd, sizeof (asection));
- if (newsect == NULL) {
- bfd_error = no_memory;
- return NULL;
- }
newsect->name = name;
newsect->index = abfd->section_count++;
newsect->flags = SEC_NO_FLAGS;
- newsect->userdata = 0;
- newsect->next = (asection *)NULL;
- newsect->relocation = (arelent *)NULL;
+ newsect->userdata = NULL;
+ newsect->contents = NULL;
+ newsect->next = (asection *) NULL;
+ newsect->relocation = (arelent *) NULL;
newsect->reloc_count = 0;
- newsect->line_filepos =0;
+ newsect->line_filepos = 0;
newsect->owner = abfd;
- if (BFD_SEND (abfd, _new_section_hook, (abfd, newsect)) != true) {
- free (newsect);
+ newsect->comdat = NULL;
+
+ /* Create a symbol whos only job is to point to this section. This is
+ useful for things like relocs which are relative to the base of a
+ section. */
+ newsect->symbol = bfd_make_empty_symbol (abfd);
+ if (newsect->symbol == NULL)
return NULL;
- }
+ newsect->symbol->name = name;
+ newsect->symbol->value = 0;
+ newsect->symbol->section = newsect;
+ newsect->symbol->flags = BSF_SECTION_SYM;
+
+ newsect->symbol_ptr_ptr = &newsect->symbol;
+
+ if (BFD_SEND (abfd, _new_section_hook, (abfd, newsect)) != true)
+ {
+ free (newsect);
+ return NULL;
+ }
*prev = newsect;
return newsect;
}
+/*
+FUNCTION
+ bfd_make_section
+
+SYNOPSIS
+ asection *bfd_make_section(bfd *, CONST char *name);
+
+DESCRIPTION
+ Like <<bfd_make_section_anyway>>, but return <<NULL>> (without calling
+ bfd_set_error ()) without changing the section chain if there is already a
+ section named @var{name}. If there is an error, return <<NULL>> and set
+ <<bfd_error>>.
+*/
+
+asection *
+bfd_make_section (abfd, name)
+ bfd *abfd;
+ CONST char *name;
+{
+ asection *sect = abfd->sections;
+
+ if (strcmp (name, BFD_ABS_SECTION_NAME) == 0)
+ {
+ return bfd_abs_section_ptr;
+ }
+ if (strcmp (name, BFD_COM_SECTION_NAME) == 0)
+ {
+ return bfd_com_section_ptr;
+ }
+ if (strcmp (name, BFD_UND_SECTION_NAME) == 0)
+ {
+ return bfd_und_section_ptr;
+ }
+
+ if (strcmp (name, BFD_IND_SECTION_NAME) == 0)
+ {
+ return bfd_ind_section_ptr;
+ }
+
+ while (sect)
+ {
+ if (!strcmp (sect->name, name))
+ return NULL;
+ sect = sect->next;
+ }
+
+ /* The name is not already used; go ahead and make a new section. */
+ return bfd_make_section_anyway (abfd, name);
+}
+
-/*proto* bfd_set_section_flags
-Attempts to set the attributes of the section named in the BFD
-supplied to the value. Returns true on success, false on error.
-Possible error returns are:
-@table @code
-@item invalid operation
-The section cannot have one or more of the attributes requested. For
-example, a .bss section in @code{a.out} may not have the
-@code{SEC_HAS_CONTENTS} field set.
-@end table
+/*
+FUNCTION
+ bfd_set_section_flags
+
+SYNOPSIS
+ boolean bfd_set_section_flags(bfd *abfd, asection *sec, flagword flags);
+
+DESCRIPTION
+ Set the attributes of the section @var{sec} in the BFD
+ @var{abfd} to the value @var{flags}. Return <<true>> on success,
+ <<false>> on error. Possible error returns are:
+
+ o <<bfd_error_invalid_operation>> -
+ The section cannot have one or more of the attributes
+ requested. For example, a .bss section in <<a.out>> may not
+ have the <<SEC_HAS_CONTENTS>> field set.
-*; PROTO(boolean, bfd_set_section_flags,
- (bfd *, asection *, flagword));
*/
+/*ARGSUSED*/
boolean
-DEFUN(bfd_set_section_flags,(abfd, section, flags),
- bfd *abfd AND
- sec_ptr section AND
- flagword flags)
+bfd_set_section_flags (abfd, section, flags)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ sec_ptr section;
+ flagword flags;
{
- if ((flags & bfd_applicable_section_flags (abfd)) != flags) {
- bfd_error = invalid_operation;
- return false;
- }
+#if 0
+ /* If you try to copy a text section from an input file (where it
+ has the SEC_CODE flag set) to an output file, this loses big if
+ the bfd_applicable_section_flags (abfd) doesn't have the SEC_CODE
+ set - which it doesn't, at least not for a.out. FIXME */
+
+ if ((flags & bfd_applicable_section_flags (abfd)) != flags)
+ {
+ bfd_set_error (bfd_error_invalid_operation);
+ return false;
+ }
+#endif
section->flags = flags;
return true;
}
-/*proto* bfd_map_over_sections
-Calls the provided function @var{func} for each section attatched to
-the BFD @var{abfd}, passing @var{obj} as an argument. The function
-will be called as if by
+/*
+FUNCTION
+ bfd_map_over_sections
+
+SYNOPSIS
+ void bfd_map_over_sections(bfd *abfd,
+ void (*func)(bfd *abfd,
+ asection *sect,
+ PTR obj),
+ PTR obj);
-@example
- func(abfd, the_section, obj);
-@end example
+DESCRIPTION
+ Call the provided function @var{func} for each section
+ attached to the BFD @var{abfd}, passing @var{obj} as an
+ argument. The function will be called as if by
+| func(abfd, the_section, obj);
-*; PROTO(void, bfd_map_over_sections,
- (bfd *abfd, void (*func)(), PTR obj));
+ This is the prefered method for iterating over sections; an
+ alternative would be to use a loop:
+
+| section *p;
+| for (p = abfd->sections; p != NULL; p = p->next)
+| func(abfd, p, ...)
-This is the prefered method for iterating over sections, an
-alternative would be to use a loop:
-@example
- section *p;
- for (p = abfd->sections; p != NULL; p = p->next)
- func(abfd, p, ...)
-@end example
*/
/*VARARGS2*/
void
-DEFUN(bfd_map_over_sections,(abfd, operation, user_storage),
- bfd *abfd AND
- void (*operation)() AND
- PTR user_storage)
+bfd_map_over_sections (abfd, operation, user_storage)
+ bfd *abfd;
+ void (*operation) PARAMS ((bfd * abfd, asection * sect, PTR obj));
+ PTR user_storage;
{
asection *sect;
- int i = 0;
-
+ unsigned int i = 0;
+
for (sect = abfd->sections; sect != NULL; i++, sect = sect->next)
(*operation) (abfd, sect, user_storage);
- if (i != abfd->section_count) /* Debugging */
- abort();
+ if (i != abfd->section_count) /* Debugging */
+ abort ();
}
-/*proto* bfd_set_section_size
-Sets @var{section} to the size @var{val}. If the operation is ok, then
-@code{true} is returned, else @code{false}.
+/*
+FUNCTION
+ bfd_set_section_size
+
+SYNOPSIS
+ boolean bfd_set_section_size(bfd *abfd, asection *sec, bfd_size_type val);
-Possible error returns:
-@table @code
-@item invalid_operation
-Writing has started to the BFD, so setting the size is invalid
-@end table
+DESCRIPTION
+ Set @var{sec} to the size @var{val}. If the operation is
+ ok, then <<true>> is returned, else <<false>>.
+
+ Possible error returns:
+ o <<bfd_error_invalid_operation>> -
+ Writing has started to the BFD, so setting the size is invalid.
-*; PROTO(boolean, bfd_set_section_size,
- (bfd *, asection *, bfd_size_type val));
*/
boolean
-DEFUN(bfd_set_section_size,(abfd, ptr, val),
- bfd *abfd AND
- sec_ptr ptr AND
- bfd_size_type val)
+bfd_set_section_size (abfd, ptr, val)
+ bfd *abfd;
+ sec_ptr ptr;
+ bfd_size_type val;
{
/* Once you've started writing to any section you cannot create or change
the size of any others. */
- if (abfd->output_has_begun) {
- bfd_error = invalid_operation;
- return false;
- }
+ if (abfd->output_has_begun)
+ {
+ bfd_set_error (bfd_error_invalid_operation);
+ return false;
+ }
+
+ ptr->_cooked_size = val;
+ ptr->_raw_size = val;
- ptr->size = val;
-
return true;
}
-/*proto* bfd_set_section_contents
-Sets the contents of the section @var{section} in BFD @var{abfd} to
-the data starting in memory at @var{data}. The data is written to the
-output section starting at offset @var{offset} for @var{count} bytes.
-
-Normally @code{true} is returned, else @code{false}. Possible error
-returns are:
-@table @code
-@item no_contents
-The output section does not have the @code{SEC_HAS_CONTENTS}
-attribute, so nothing can be written to it.
-@item and some more too
-@end table
-This routine is front end to the back end function @code{_bfd_set_section_contents}.
-
-*; PROTO(boolean, bfd_set_section_contents,
- (bfd *abfd,
+/*
+FUNCTION
+ bfd_set_section_contents
+
+SYNOPSIS
+ boolean bfd_set_section_contents
+ (bfd *abfd,
asection *section,
PTR data,
file_ptr offset,
- bfd_size_type count));
+ bfd_size_type count);
+
+
+DESCRIPTION
+ Sets the contents of the section @var{section} in BFD
+ @var{abfd} to the data starting in memory at @var{data}. The
+ data is written to the output section starting at offset
+ @var{offset} for @var{count} octets.
+
+
+
+ Normally <<true>> is returned, else <<false>>. Possible error
+ returns are:
+ o <<bfd_error_no_contents>> -
+ The output section does not have the <<SEC_HAS_CONTENTS>>
+ attribute, so nothing can be written to it.
+ o and some more too
+
+ This routine is front end to the back end function
+ <<_bfd_set_section_contents>>.
+
*/
+#define bfd_get_section_size_now(abfd,sec) \
+(sec->reloc_done \
+ ? bfd_get_section_size_after_reloc (sec) \
+ : bfd_get_section_size_before_reloc (sec))
+
boolean
-DEFUN(bfd_set_section_contents,(abfd, section, location, offset, count),
- bfd *abfd AND
- sec_ptr section AND
- PTR location AND
- file_ptr offset AND
- bfd_size_type count)
+bfd_set_section_contents (abfd, section, location, offset, count)
+ bfd *abfd;
+ sec_ptr section;
+ PTR location;
+ file_ptr offset;
+ bfd_size_type count;
{
- if (!(bfd_get_section_flags(abfd, section) & SEC_HAS_CONTENTS))
- {
- bfd_error = no_contents;
- return(false);
- }
+ bfd_size_type sz;
+
+ if (!(bfd_get_section_flags (abfd, section) & SEC_HAS_CONTENTS))
+ {
+ bfd_set_error (bfd_error_no_contents);
+ return (false);
+ }
+
+ if (offset < 0)
+ {
+ bad_val:
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+ }
+ sz = bfd_get_section_size_now (abfd, section);
+ if ((bfd_size_type) offset > sz
+ || count > sz
+ || offset + count > sz)
+ goto bad_val;
+
+ switch (abfd->direction)
+ {
+ case read_direction:
+ case no_direction:
+ bfd_set_error (bfd_error_invalid_operation);
+ return false;
+
+ case write_direction:
+ break;
+
+ case both_direction:
+ /* File is opened for update. `output_has_begun' some time ago when
+ the file was created. Do not recompute sections sizes or alignments
+ in _bfd_set_section_content. */
+ abfd->output_has_begun = true;
+ break;
+ }
if (BFD_SEND (abfd, _bfd_set_section_contents,
- (abfd, section, location, offset, count)))
- {
- abfd->output_has_begun = true;
- return true;
- }
+ (abfd, section, location, offset, count)))
+ {
+ abfd->output_has_begun = true;
+ return true;
+ }
return false;
}
-/*proto* bfd_get_section_contents
-This function reads data from @var{section} in BFD @var{abfd} into
-memory starting at @var{location}. The data is read at an offset of
-@var{offset} from the start of the input section, and is read for
-@var{count} bytes.
+/*
+FUNCTION
+ bfd_get_section_contents
-If the contents of a constuctor with the @code{SEC_CONSTUCTOR} flag
-set are requested, then the @var{location} is filled with zeroes.
+SYNOPSIS
+ boolean bfd_get_section_contents
+ (bfd *abfd, asection *section, PTR location,
+ file_ptr offset, bfd_size_type count);
-If no errors occur, @code{true} is returned, else @code{false}.
-Possible errors are:
+DESCRIPTION
+ Read data from @var{section} in BFD @var{abfd}
+ into memory starting at @var{location}. The data is read at an
+ offset of @var{offset} from the start of the input section,
+ and is read for @var{count} bytes.
-@table @code
-@item unknown yet
-@end table
+ If the contents of a constructor with the <<SEC_CONSTRUCTOR>>
+ flag set are requested or if the section does not have the
+ <<SEC_HAS_CONTENTS>> flag set, then the @var{location} is filled
+ with zeroes. If no errors occur, <<true>> is returned, else
+ <<false>>.
-*; PROTO(boolean, bfd_get_section_contents,
- (bfd *abfd, asection *section, PTR location,
- file_ptr offset, bfd_size_type count));
*/
boolean
-DEFUN(bfd_get_section_contents,(abfd, section, location, offset, count),
- bfd *abfd AND
- sec_ptr section AND
- PTR location AND
- file_ptr offset AND
- bfd_size_type count)
+bfd_get_section_contents (abfd, section, location, offset, count)
+ bfd *abfd;
+ sec_ptr section;
+ PTR location;
+ file_ptr offset;
+ bfd_size_type count;
{
- if (section->flags & SEC_CONSTRUCTOR)
- {
- memset(location, 0, (unsigned)count);
- return true;
- }
- else
+ bfd_size_type sz;
+
+ if (section->flags & SEC_CONSTRUCTOR)
+ {
+ memset (location, 0, (unsigned) count);
+ return true;
+ }
+
+ if (offset < 0)
+ {
+ bad_val:
+ bfd_set_error (bfd_error_bad_value);
+ return false;
+ }
+ /* Even if reloc_done is true, this function reads unrelocated
+ contents, so we want the raw size. */
+ sz = section->_raw_size;
+ if ((bfd_size_type) offset > sz || count > sz || offset + count > sz)
+ goto bad_val;
+
+ if (count == 0)
+ /* Don't bother. */
+ return true;
+
+ if ((section->flags & SEC_HAS_CONTENTS) == 0)
+ {
+ memset (location, 0, (unsigned) count);
+ return true;
+ }
+
+ if ((section->flags & SEC_IN_MEMORY) != 0)
+ {
+ memcpy (location, section->contents + offset, (size_t) count);
+ return true;
+ }
+
+ return BFD_SEND (abfd, _bfd_get_section_contents,
+ (abfd, section, location, offset, count));
+}
+
+/*
+FUNCTION
+ bfd_copy_private_section_data
+
+SYNOPSIS
+ boolean bfd_copy_private_section_data(bfd *ibfd, asection *isec, bfd *obfd, asection *osec);
+
+DESCRIPTION
+ Copy private section information from @var{isec} in the BFD
+ @var{ibfd} to the section @var{osec} in the BFD @var{obfd}.
+ Return <<true>> on success, <<false>> on error. Possible error
+ returns are:
+
+ o <<bfd_error_no_memory>> -
+ Not enough memory exists to create private data for @var{osec}.
+
+.#define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
+. BFD_SEND (obfd, _bfd_copy_private_section_data, \
+. (ibfd, isection, obfd, osection))
+*/
+
+/*
+FUNCTION
+ _bfd_strip_section_from_output
+
+SYNOPSIS
+ void _bfd_strip_section_from_output
+ (struct bfd_link_info *info, asection *section);
+
+DESCRIPTION
+ Remove @var{section} from the output. If the output section
+ becomes empty, remove it from the output bfd. @var{info} may
+ be NULL; if it is not, it is used to decide whether the output
+ section is empty.
+*/
+void
+_bfd_strip_section_from_output (info, s)
+ struct bfd_link_info *info;
+ asection *s;
+{
+ asection **spp, *os;
+ struct bfd_link_order *p, *pp;
+ boolean keep_os;
+
+ /* Excise the input section from the link order.
+
+ FIXME: For all calls that I can see to this function, the link
+ orders have not yet been set up. So why are we checking them? --
+ Ian */
+ os = s->output_section;
+ for (p = os->link_order_head, pp = NULL; p != NULL; pp = p, p = p->next)
+ if (p->type == bfd_indirect_link_order
+ && p->u.indirect.section == s)
{
- return (BFD_SEND (abfd, _bfd_get_section_contents,
- (abfd, section, location, offset, count)));
+ if (pp)
+ pp->next = p->next;
+ else
+ os->link_order_head = p->next;
+ if (!p->next)
+ os->link_order_tail = pp;
+ break;
}
-}
+ keep_os = os->link_order_head != NULL;
+
+ if (! keep_os && info != NULL)
+ {
+ bfd *abfd;
+ for (abfd = info->input_bfds; abfd != NULL; abfd = abfd->link_next)
+ {
+ asection *is;
+ for (is = abfd->sections; is != NULL; is = is->next)
+ {
+ if (is != s && is->output_section == os)
+ break;
+ }
+ if (is != NULL)
+ break;
+ }
+ if (abfd != NULL)
+ keep_os = true;
+ }
+
+ /* If the output section is empty, remove it too. Careful about sections
+ that have been discarded in the link script -- they are mapped to
+ bfd_abs_section, which has no owner. */
+ if (!keep_os && os->owner != NULL)
+ {
+ for (spp = &os->owner->sections; *spp; spp = &(*spp)->next)
+ if (*spp == os)
+ {
+ *spp = os->next;
+ os->owner->section_count--;
+ break;
+ }
+ }
+}
projects / deliverable / binutils-gdb.git / blobdiff