/* BFD back-end for s-record objects.
- Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2011
- Free Software Foundation, Inc.
+ Copyright (C) 1990-2017 Free Software Foundation, Inc.
Written by Steve Chamberlain of Cygnus Support <sac@cygnus.com>.
This file is part of BFD, the Binary File Descriptor library.
/* The number of data bytes we actually fit onto a line on output.
This variable can be modified by objcopy's --srec-len parameter.
For a 0x75 byte record you should set --srec-len=0x70. */
-unsigned int Chunk = DEFAULT_CHUNK;
+unsigned int _bfd_srec_len = DEFAULT_CHUNK;
/* The type of srec output (free or forced to S3).
This variable can be modified by objcopy's --srec-forceS3
parameter. */
-bfd_boolean S3Forced = FALSE;
+bfd_boolean _bfd_srec_forceS3 = FALSE;
/* When writing an S-record file, the S-records can not be output as
they are seen. This structure is used to hold them in memory. */
}
else
{
- char buf[10];
+ char buf[40];
if (! ISPRINT (c))
- sprintf (buf, "\\%03o", (unsigned int) c);
+ sprintf (buf, "\\%03o", (unsigned int) c & 0xff);
else
{
buf[0] = c;
buf[1] = '\0';
}
- (*_bfd_error_handler)
+ _bfd_error_handler
+ /* xgettext:c-format */
(_("%B:%d: Unexpected character `%s' in S-record file\n"),
abfd, lineno, buf);
bfd_set_error (bfd_error_bad_value);
case 'S':
{
file_ptr pos;
- char hdr[3];
- unsigned int bytes;
+ unsigned char hdr[3];
+ unsigned int bytes, min_bytes;
bfd_vma address;
bfd_byte *data;
unsigned char check_sum;
}
check_sum = bytes = HEX (hdr + 1);
+ min_bytes = 3;
+ if (hdr[0] == '2' || hdr[0] == '8')
+ min_bytes = 4;
+ else if (hdr[0] == '3' || hdr[0] == '7')
+ min_bytes = 5;
+ if (bytes < min_bytes)
+ {
+ /* xgettext:c-format */
+ _bfd_error_handler (_("%B:%d: byte count %d too small\n"),
+ abfd, lineno, bytes);
+ bfd_set_error (bfd_error_bad_value);
+ goto error_return;
+ }
+
if (bytes * 2 > bufsize)
{
if (buf != NULL)
check_sum = 255 - (check_sum & 0xff);
if (check_sum != HEX (data))
{
- (*_bfd_error_handler)
+ _bfd_error_handler
+ /* xgettext:c-format */
(_("%B:%d: Bad checksum in S-record file\n"),
abfd, lineno);
bfd_set_error (bfd_error_bad_value);
check_sum = 255 - (check_sum & 0xff);
if (check_sum != HEX (data))
{
- (*_bfd_error_handler)
+ _bfd_error_handler
+ /* xgettext:c-format */
(_("%B:%d: Bad checksum in S-record file\n"),
abfd, lineno);
bfd_set_error (bfd_error_bad_value);
return FALSE;
memcpy ((void *) data, location, (size_t) bytes_to_do);
- /* Ff S3Forced is TRUE then always select S3 records,
- regardless of the siez of the addresses. */
- if (S3Forced)
+ /* If _bfd_srec_forceS3 is TRUE then always select S3 records,
+ regardless of the size of the addresses. */
+ if (_bfd_srec_forceS3)
tdata->type = 3;
else if ((section->lma + (offset + bytes_to_do) / opb - 1) <= 0xffff)
; /* The default, S1, is OK. */
case 7:
TOHEX (dst, (address >> 24), check_sum);
dst += 2;
+ /* Fall through. */
case 8:
case 2:
TOHEX (dst, (address >> 16), check_sum);
dst += 2;
+ /* Fall through. */
case 9:
case 1:
case 0:
have three, and S3 (tdata->type == 3) records have four.
The total length can't exceed 255, and a zero data length will
spin for a long time. */
- if (Chunk == 0)
- Chunk = 1;
- else if (Chunk > MAXCHUNK - tdata->type - 2)
- Chunk = MAXCHUNK - tdata->type - 2;
+ if (_bfd_srec_len == 0)
+ _bfd_srec_len = 1;
+ else if (_bfd_srec_len > MAXCHUNK - tdata->type - 2)
+ _bfd_srec_len = MAXCHUNK - tdata->type - 2;
while (octets_written < list->size)
{
bfd_vma address;
unsigned int octets_this_chunk = list->size - octets_written;
- if (octets_this_chunk > Chunk)
- octets_this_chunk = Chunk;
+ if (octets_this_chunk > _bfd_srec_len)
+ octets_this_chunk = _bfd_srec_len;
address = list->where + octets_written / bfd_octets_per_byte (abfd);
#define srec_bfd_is_local_label_name bfd_generic_is_local_label_name
#define srec_get_lineno _bfd_nosymbols_get_lineno
#define srec_find_nearest_line _bfd_nosymbols_find_nearest_line
+#define srec_find_line _bfd_nosymbols_find_line
#define srec_find_inliner_info _bfd_nosymbols_find_inliner_info
#define srec_make_empty_symbol _bfd_generic_make_empty_symbol
+#define srec_get_symbol_version_string _bfd_nosymbols_get_symbol_version_string
#define srec_bfd_make_debug_symbol _bfd_nosymbols_bfd_make_debug_symbol
#define srec_read_minisymbols _bfd_generic_read_minisymbols
#define srec_minisymbol_to_symbol _bfd_generic_minisymbol_to_symbol
#define srec_section_already_linked _bfd_generic_section_already_linked
#define srec_bfd_define_common_symbol bfd_generic_define_common_symbol
#define srec_bfd_link_hash_table_create _bfd_generic_link_hash_table_create
-#define srec_bfd_link_hash_table_free _bfd_generic_link_hash_table_free
#define srec_bfd_link_add_symbols _bfd_generic_link_add_symbols
#define srec_bfd_link_just_syms _bfd_generic_link_just_syms
-#define srec_bfd_copy_link_hash_symbol_type \
- _bfd_generic_copy_link_hash_symbol_type
+#define srec_bfd_copy_link_hash_symbol_type _bfd_generic_copy_link_hash_symbol_type
#define srec_bfd_final_link _bfd_generic_final_link
#define srec_bfd_link_split_section _bfd_generic_link_split_section
+#define srec_bfd_link_check_relocs _bfd_generic_link_check_relocs
const bfd_target srec_vec =
{
projects / deliverable / binutils-gdb.git / blobdiff